Add a regression test file that exercises the kinds of commands that
allow_system_table_mods allows.
This is put in the "unsafe_tests" suite, so it won't accidentally
create a mess if someone runs the normal regression tests against an
instance that they care about.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/8b00ea5e-28a7-88ba-e848-21528b632354%402ndquadrant.com
When maintaining or merging patches, one of the most common sources
for conflicts are the list of objects in makefiles. Especially when
the split across lines has been changed on both sides, which is
somewhat common due to attempting to stay below 80 columns, those
conflicts are unnecessarily laborious to resolve.
By splitting, and alphabetically sorting, OBJS style lines into one
object per line, conflicts should be less frequent, and easier to
resolve when they still occur.
Author: Andres Freund
Discussion: https://postgr.es/m/20191029200901.vww4idgcxv74cwes@alap3.anarazel.de
Historically, the code to build relation options has been shaped the
same way in multiple code paths by using a set of datums in input with
the options parsed with a static table which is then filled with the
option values. This introduces a new common routine in reloptions.c to
do most of the legwork for the in-core code paths.
Author: Amit Langote
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CA+HiwqGsoSn_uTPPYT19WrtR7oYpYtv4CdS0xuedTKiHHWuk_g@mail.gmail.com
The location of the session end hook has been chosen so as it is
possible to allow modules to do their own transactions, however any
trying to any any subsystem which went through before_shmem_exit()
would cause issues, limiting the pluggability of the hook.
Per discussion with Tom Lane and Andres Freund.
Discussion: https://postgr.es/m/18722.1569906636@sss.pgh.pa.us
Several buildfarm machines have been complaining about the new module
test_session_hooks to be unstable, like crake and thorntail. The issue
was that the module was trying to log some start and end session
activity for parallel workers, which makes little sense as they don't
support DML, so just prevent this pattern to happen in the module.
This could be reproduced by enforcing force_parallel_mode=regress, which
is the value used by some of the buildfarm members.
Discussion: https://postgr.es/m/20191001045246.GF2781@paquier.xyz
These hooks can be used in loadable modules. A simple test module is
included.
The first attempt was done with cd8ce3a but we lacked handling for
NO_INSTALLCHECK in the MSVC scripts (problem solved afterwards by
431f1599) so the buildfarm got angry. This also fixes a couple of
issues noticed upon review compared to the first attempt, so the code
has slightly changed, resulting in a more simple test module.
Author: Fabrízio de Royes Mello, Yugo Nagata
Reviewed-by: Andrew Dunstan, Michael Paquier, Aleksandr Parfenov
Discussion: https://postgr.es/m/20170720204733.40f2b7eb.nagata@sraoss.co.jp
Discussion: https://postgr.es/m/20190823042602.GB5275@paquier.xyz
The code was enforcing AccessExclusiveLock for all custom relation
options, which is incorrect as the APIs allow a custom lock level to be
set.
While on it, fix a couple of inconsistencies in the tests and the README
of dummy_index_am.
Oversights in commit 773df88.
Discussion: https://postgr.es/m/20190925234152.GA2115@paquier.xyz
All our current in core relation options of type string (not many,
admittedly) behave in reality like enums. But after seeing an
implementation for enum reloptions, it's clear that strings are messier,
so introduce the new reloption type. Switch all string options to be
enums instead.
Fortunately we have a recently introduced test module for reloptions, so
we don't lose coverage of string reloptions, which may still be used by
third-party modules.
Authors: Nikolay Shaplov, Álvaro Herrera
Reviewed-by: Nikita Glukhov, Aleksandr Parfenov
Discussion: https://postgr.es/m/43332102.S2V5pIjXRx@x200m
Several buildfarm members (crake, loach and spurfowl) are complaining
about two queries looking up at pg_class.reloptions which trigger the
validation routines for string reloptions with default values. This
commit limits the routines to be triggered only when building an index
with all custom options set in CREATE INDEX, which is sufficient for the
coverage.
Introduced by 640c198.
This includes more tests dedicated to relation options, bringing the
coverage of this code close to 100%, and the module can be used for
other purposes, like a base template for an index AM implementation.
Author: Nikolay Sharplov, Michael Paquier
Reviewed-by: Álvaro Herrera, Dent John
Discussion: https://postgr.es/m/17071942.m9zZutALE6@x200m
Commit 6f6b99d13 stuck an INFO message into the fast path for
checking partition constraints, for no very good reason except
that it made it easy for the regression tests to verify that
that path was taken. Assorted later patches did likewise,
increasing the unsuppressable-chatter level from ALTER TABLE
even more. This isn't good for the user experience, so let's
drop these messages down to DEBUG1 where they belong. So as
not to have a loss of test coverage, create a TAP test that
runs the relevant queries with client_min_messages = DEBUG1
and greps for the expected messages.
This testing method is a bit brute-force --- in particular,
it duplicates the execution of a fair amount of the core
create_table and alter_table tests. We experimented with
other solutions, but running any significant amount of
standard testing with client_min_messages = DEBUG1 seems
to have a lot of output-stability pitfalls, cf commits
bbb96c370 and 5655565c0. Possibly at some point we'll look
into whether we can reduce the amount of test duplication.
Backpatch into v12, because some of these messages are new
in v12 and we don't really want to ship it that way.
Sergei Kornilov
Discussion: https://postgr.es/m/81911511895540@web58j.yandex.ru
Discussion: https://postgr.es/m/4859321552643736@myt5-02b80404fd9e.qloud-c.yandex.net
The comment did not match what the code actually did for integers with
the 43rd bit set. You get an integer like that, if you have a posting
list with two adjacent TIDs that are more than 2^31 blocks apart.
According to the comment, we would store that in 6 bytes, with no
continuation bit on the 6th byte, but in reality, the code encodes it
using 7 bytes, with a continuation bit on the 6th byte as normal.
The decoding routine also handled these 7-byte integers correctly, except
for an overflow check that assumed that one integer needs at most 6 bytes.
Fix the overflow check, and fix the comment to match what the code
actually does. Also fix the comment that claimed that there are 17 unused
bits in the 64-bit representation of an item pointer. In reality, there
are 64-32-11=21.
Fitting any item pointer into max 6 bytes was an important property when
this was written, because in the old pre-9.4 format, item pointers were
stored as plain arrays, with 6 bytes for every item pointer. The maximum
of 6 bytes per integer in the new format guaranteed that we could convert
any page from the old format to the new format after upgrade, so that the
new format was never larger than the old format. But we hardly need to
worry about that anymore, and running into that problem during upgrade,
where an item pointer is expanded from 6 to 7 bytes such that the data
doesn't fit on a page anymore, is implausible in practice anyway.
Backpatch to all supported versions.
This also includes a little test module to test these large distances
between item pointers, without requiring a 16 TB table. It is not
backpatched, I'm including it more for the benefit of future development
of new posting list formats.
Discussion: https://www.postgresql.org/message-id/33bfc20a-5c86-f50c-f5a5-58e9925d05ff%40iki.fi
Reviewed-by: Masahiko Sawada, Alexander Korotkov
This test script is unsafe to run in "make installcheck" mode for
(at least) two reasons: it creates and destroys some role names
that don't follow the "regress_xxx" naming convention, and it
sets and then resets the application_name GUC attached to every
existing role. While we've not had complaints, these surely are
not good things to do within a production installation, and
regress.sgml pretty clearly implies that we won't do them.
Rather than lose test coverage altogether, let's just move this
script somewhere where it will get run by "make check" but not
"make installcheck". src/test/modules/ already has that property.
Since it seems likely that we'll want other regression tests in
future that also exceed the constraints of "make installcheck",
create a generically-named src/test/modules/unsafe_tests/
directory to hold them.
Discussion: https://postgr.es/m/16638.1468620817@sss.pgh.pa.us
In commit 18555b132 we tentatively established a rule that regression
tests should use names containing "regression" for databases, and names
starting with "regress_" for all other globally-visible object names, so
as to circumscribe the side-effects that "make installcheck" could have
on an existing installation.
This commit adds a simple enforcement mechanism for that rule: if the code
is compiled with ENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS defined, it
will emit a warning (not an error) whenever a database, role, tablespace,
subscription, or replication origin name is created that doesn't obey the
rule. Running one or more buildfarm members with that symbol defined
should be enough to catch new violations, at least in the regular
regression tests. Most TAP tests wouldn't notice such warnings, but
that's actually fine because TAP tests don't execute against an existing
server anyway.
Since it's already the case that running src/test/modules/ tests in
installcheck mode is deprecated, we can use that as a home for tests
that seem unsafe to run against an existing server, such as tests that
might have side-effects on existing roles. Document that (though this
commit doesn't in itself make it any less safe than before).
Update regress.sgml to define these restrictions more clearly, and
to clean up assorted lack-of-up-to-date-ness in its descriptions of
the available regression tests.
Discussion: https://postgr.es/m/16638.1468620817@sss.pgh.pa.us
There were a number of issues in the recent commits which include typos,
code and comments mismatch, leftover function declarations. Fix them.
Reported-by: Alexander Lakhin
Author: Alexander Lakhin, Amit Kapila and Amit Langote
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/ef0c0232-0c1d-3a35-63d4-0ebd06e31387@gmail.com
This test module was not getting invoked, other than at compile time,
limiting its usefulness -- and keeping its coverage at 0%. Add a
minimal regression test to ensure it runs on make check-world; this
makes it 92% covered (line-wise), which seems sufficient.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20190529193256.GA17603@alvherre.pgsql
Up to now, DefineIndex() was responsible for adding attnotnull constraints
to the columns of a primary key, in any case where it hadn't been
convenient for transformIndexConstraint() to mark those columns as
is_not_null. It (or rather its minion index_check_primary_key) did this
by executing an ALTER TABLE SET NOT NULL command for the target table.
The trouble with this solution is that if we're creating the index due
to ALTER TABLE ADD PRIMARY KEY, and the outer ALTER TABLE has additional
sub-commands, the inner ALTER TABLE's operations executed at the wrong
time with respect to the outer ALTER TABLE's operations. In particular,
the inner ALTER would perform a validation scan at a point where the
table's storage might be inconsistent with its catalog entries. (This is
on the hairy edge of being a security problem, but AFAICS it isn't one
because the inner scan would only be interested in the tuples' null
bitmaps.) This can result in unexpected failures, such as the one seen
in bug #15580 from Allison Kaptur.
To fix, let's remove the attempt to do SET NOT NULL from DefineIndex(),
reducing index_check_primary_key's role to verifying that the columns are
already not null. (It shouldn't ever see such a case, but it seems wise
to keep the check for safety.) Instead, make transformIndexConstraint()
generate ALTER TABLE SET NOT NULL subcommands to be executed ahead of
the ADD PRIMARY KEY operation in every case where it can't force the
column to be created already-not-null. This requires only minor surgery
in parse_utilcmd.c, and it makes for a much more satisfying spec for
transformIndexConstraint(): it's no longer having to take it on faith
that someone else will handle addition of NOT NULL constraints.
To make that work, we have to move the execution of AT_SetNotNull into
an ALTER pass that executes ahead of AT_PASS_ADD_INDEX. I moved it to
AT_PASS_COL_ATTRS, and put that after AT_PASS_ADD_COL to avoid failure
when the column is being added in the same command. This incidentally
fixes a bug in the only previous usage of AT_PASS_COL_ATTRS, for
AT_SetIdentity: it didn't work either for a newly-added column.
Playing around with this exposed a separate bug in ALTER TABLE ONLY ...
ADD PRIMARY KEY for partitioned tables. The intent of the ONLY modifier
in that context is to prevent doing anything that would require holding
lock for a long time --- but the implied SET NOT NULL would recurse to
the child partitions, and do an expensive validation scan for any child
where the column(s) were not already NOT NULL. To fix that, invent a
new ALTER subcommand AT_CheckNotNull that just insists that a child
column be already NOT NULL, and apply that, not AT_SetNotNull, when
recursing to children in this scenario. This results in a slightly laxer
definition of ALTER TABLE ONLY ... SET NOT NULL for partitioned tables,
too: that command will now work as long as all children are already NOT
NULL, whereas before it just threw up its hands if there were any
partitions.
In passing, clean up the API of generateClonedIndexStmt(): remove a
useless argument, ensure that the output argument is not left undefined,
update the header comment.
A small side effect of this change is that no-such-column errors in ALTER
TABLE ADD PRIMARY KEY now produce a different message that includes the
table name, because they are now detected by the SET NOT NULL step which
has historically worded its error that way. That seems fine to me, so
I didn't make any effort to avoid the wording change.
The basic bug #15580 is of very long standing, and these other bugs
aren't new in v12 either. However, this is a pretty significant change
in the way ALTER TABLE ADD PRIMARY KEY works. On balance it seems best
not to back-patch, at least not till we get some more confidence that
this patch has no new bugs.
Patch by me, but thanks to Jie Zhang for a preliminary version.
Discussion: https://postgr.es/m/15580-d1a6de5a3d65da51@postgresql.org
Discussion: https://postgr.es/m/1396E95157071C4EBBA51892C5368521017F2E6E63@G08CNEXMBPEKD02.g08.fujitsu.local
Such calls can confuse the reader as strcmp() uses an integer as result.
The places patched here have been spotted by Thomas Munro, David Rowley
and myself.
Author: Michael Paquier
Reviewed-by: David Rowley
Discussion: https://postgr.es/m/20190411021946.GG2728@paquier.xyz
Coverity complained that simple8b_encode() might read beyond the end of
the 'diffs' array, in the loop to encode the integers. That was a false
positive, because we never get into the loop in modes 0 or 1, and the
array is large enough for all the other modes. But I admit it's very
subtle, so it's not surprising that Coverity didn't see it, and it's not
very obvious to humans either. Refactor it, so that the second loop
re-computes the differences, instead of carrying them over from the first
loop in the 'diffs' array. This way, the 'diffs' array is not needed
anymore. It makes no measurable difference in performance, and seems more
straightforward this way.
Also, improve the comments in simple8b_encode(): fix the comment about its
return value that was flat-out wrong, and explain the condition when it
returns EMPTY_CODEWORD better.
In the passing, move the 'selector' from the codeword's low bits to the
high bits. It doesn't matter much, but looking at the original paper, and
googling around for other Simple-8b implementations, that's how it's
usually done.
Per Coverity, and Tom Lane's report off-list.
There were more large constants that needed UINT64CONST. And one variable
was declared as "int", when it needed to be uint64. These bugs were only
visible on 32-bit systems; clearly I should've tested on one, given that
this code does a lot of work with 64-bit integers.
Also, in the test "huge distances" test, the code created some values with
random distances between them, but the test logic didn't take into account
the possibility that the random distance was exactly 1. That never actually
happens with the seed we're using, but let's be tidy.
Buildfarm member 'woodlouse' failed one of the tests, and I'm not sure
which test failed. Better to print the names of the tests, so that it
will appear in the regression.diffs on failure.
The set is implemented as a B-tree, with a compact representation at leaf
items, using Simple-8b algorithm, so that clusters of nearby values use
less memory.
The IntegerSet isn't used for anything yet, aside from the test code, but
we have two patches in the works that would benefit from this: A patch to
allow GiST vacuum to delete empty pages, and a patch to reduce heap
VACUUM's memory usage, by storing the list of dead TIDs more efficiently
and lifting the 1 GB limit on its size.
This includes a unit test module, in src/test/modules/test_integerset.
It can be used to verify correctness, as a regression test, but if you run
it manully, it can also print memory usage and execution time of some of
the tests.
Author: Heikki Linnakangas, Andrey Borodin
Reviewed-by: Julien Rouhaud
Discussion: https://www.postgresql.org/message-id/b5e82599-1966-5783-733c-1a947ddb729f@iki.fi
In particular, make it possible to prove/refute "x IS NULL" and
"x IS NOT NULL" predicates from a clause involving a ScalarArrayOpExpr
even when we are unable or unwilling to deconstruct the expression
into an AND/OR tree. This avoids a former unexpected degradation of
plan quality when the size of an ARRAY[] expression or array constant
exceeded the arbitrary MAX_SAOP_ARRAY_SIZE limit. For IS-NULL proofs,
we don't really care about the values of the individual array elements;
at most, we care whether there are any, and for some common cases we
needn't even know that.
The main user-visible effect of this is to let the optimizer recognize
applicability of partial indexes with "x IS NOT NULL" predicates to
queries with "x IN (array)" clauses in some cases where it previously
failed to recognize that. The structure of predtest.c is such that a
bunch of related proofs will now also succeed, but they're probably
much less useful in the wild.
James Coleman, reviewed by David Rowley
Discussion: https://postgr.es/m/CAAaqYe8yKSvzbyu8w-dThRs9aTFMwrFxn_BkTYeXgjqe3CbNjg@mail.gmail.com
Renaming varchar_transform to varchar_support had a side effect
I hadn't foreseen: the core regression tests leave around a
transform object that relies on that function, so the name
change breaks cross-version upgrade tests, because the name
used in the older branches doesn't match.
Since the dependency on varchar_transform was chosen with the
aid of a dartboard anyway (it would surely not work as a
language transform support function), fix by just choosing
a different random builtin function with the right signature.
Also add some comments explaining why this isn't horribly unsafe.
I chose to make the same substitution in a couple of other
copied-and-pasted test cases, for consistency, though those
aren't directly contributing to the testing problem.
Per buildfarm. Back-patch, else it doesn't fix the problem.
Rename/repurpose pg_proc.protransform as "prosupport". The idea is
still that it names an internal function that provides knowledge to
the planner about the behavior of the function it's attached to;
but redesign the API specification so that it's not limited to doing
just one thing, but can support an extensible set of requests.
The original purpose of simplifying a function call is handled by
the first request type to be invented, SupportRequestSimplify.
Adjust all the existing transform functions to handle this API,
and rename them fron "xxx_transform" to "xxx_support" to reflect
the potential generalization of what they do. (Since we never
previously provided any way for extensions to add transform functions,
this change doesn't create an API break for them.)
Also add DDL and pg_dump support for attaching a support function to a
user-defined function. Unfortunately, DDL access has to be restricted
to superusers, at least for now; but seeing that support functions
will pretty much have to be written in C, that limitation is just
theoretical. (This support is untested in this patch, but a follow-on
patch will add cases that exercise it.)
Discussion: https://postgr.es/m/15193.1548028093@sss.pgh.pa.us
Create a new header optimizer/optimizer.h, which exposes just the
planner functions that can be used "at arm's length", without need
to access Paths or the other planner-internal data structures defined
in nodes/relation.h. This is intended to provide the whole planner
API seen by most of the rest of the system; although FDWs still need
to use additional stuff, and more thought is also needed about just
what selfuncs.c should rely on.
The main point of doing this now is to limit the amount of new
#include baggage that will be needed by "planner support functions",
which I expect to introduce later, and which will be in relevant
datatype modules rather than anywhere near the planner.
This commit just moves relevant declarations into optimizer.h from
other header files (a couple of which go away because everything
got moved), and adjusts #include lists to match. There's further
cleanup that could be done if we want to decide that some stuff
being exposed by optimizer.h doesn't belong in the planner at all,
but I'll leave that for another day.
Discussion: https://postgr.es/m/11460.1548706639@sss.pgh.pa.us
Move a few very simple node-creation and node-type-testing functions
from the planner's clauses.c to nodes/makefuncs and nodes/nodeFuncs.
There's nothing planner-specific about them, as evidenced by the
number of other places that were using them.
While at it, rename and_clause() etc to is_andclause() etc, to clarify
that they are node-type-testing functions not node-creation functions.
And use "static inline" implementations for the shortest ones.
Also, modify flatten_join_alias_vars() and some subsidiary functions
to take a Query not a PlannerInfo to define the join structure that
Vars should be translated according to. They were only using the
"parse" field of the PlannerInfo anyway, so this just requires removing
one level of indirection. The advantage is that now parse_agg.c can
use flatten_join_alias_vars() without the horrid kluge of creating an
incomplete PlannerInfo, which will allow that file to be decoupled from
relation.h in a subsequent patch.
Discussion: https://postgr.es/m/11460.1548706639@sss.pgh.pa.us
There were two flags used to track the access to temporary tables and
to the temporary namespace of a session which are used to restrict
PREPARE TRANSACTION, however the first control flag is a concept
included in the second. This removes the flag for temporary table
tracking, keeping around only the one at namespace level.
Author: Michael Paquier
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/20190118053126.GH1883@paquier.xyz
Attempting to use a temporary table within a two-phase transaction is
forbidden for ages. However, there have been uncovered grounds for
a couple of other object types and commands which work on temporary
objects with two-phase commit. In short, trying to create, lock or drop
an object on a temporary schema should not be authorized within a
two-phase transaction, as it would cause its state to create
dependencies with other sessions, causing all sorts of side effects with
the existing session or other sessions spawned later on trying to use
the same temporary schema name.
Regression tests are added to cover all the grounds found, the original
report mentioned function creation, but monitoring closer there are many
other patterns with LOCK, DROP or CREATE EXTENSION which are involved.
One of the symptoms resulting in combining both is that the session
which used the temporary schema is not able to shut down completely,
waiting for being able to drop the temporary schema, something that it
cannot complete because of the two-phase transaction involved with
temporary objects. In this case the client is able to disconnect but
the session remains alive on the backend-side, potentially blocking
connection backend slots from being used. Other problems reported could
also involve server crashes.
This is back-patched down to v10, which is where 9b013dc has introduced
MyXactFlags, something that this patch relies on.
Reported-by: Alexey Bashtanov
Author: Michael Paquier
Reviewed-by: Masahiko Sawada
Discussion: https://postgr.es/m/5d910e2e-0db8-ec06-dd5f-baec420513c3@imap.cc
Backpatch-through: 10
This module overlooked this necessary fixup step on the results of
transformWhereClause(). It accidentally worked anyway, because the
constructed expression involved type "name" which is not collatable,
but it fell over while I was experimenting with changing "name" to
be collatable.
Back-patch, not because there's any live bug here in back branches,
but because somebody might use this code as a model for some real
application and then not understand why it doesn't work.
The following options are added for extensions:
- TAP_TESTS, to allow an extention to run TAP tests which are the ones
present in t/*.pl. A subset of tests can always be run with the
existing PROVE_TESTS for developers.
- ISOLATION, to define a list of isolation tests.
- ISOLATION_OPTS, to pass custom options to isolation_tester.
A couple of custom Makefile rules have been accumulated across the tree
to cover the lack of facility in PGXS for a couple of releases when
using those test suites, which are all now replaced with the new flags,
without reducing the test coverage. Note that tests of contrib/bloom/
are not enabled yet, as those are proving unstable in the buildfarm.
Author: Michael Paquier
Reviewed-by: Adam Berlin, Álvaro Herrera, Tom Lane, Nikolay Shaplov,
Arthur Zakirov
Discussion: https://postgr.es/m/20180906014849.GG2726@paquier.xyz
This bypasses installcheck if specified, which makes sense for those
modules as they require non-default configuration, something which
typical users don't have. Those have been missing from the start, still
no back-patch is done.
This will be used by an upcoming patch for MSVC scripts adding support
for NO_INSTALLCHECK as installcheck is the default mode for contrib and
modules for performance reasons in the buildfarm.
Author: Michael Paquier
Reviewed-by: Andrew Dunstan
Discussion: https://postgr.es/m/20181126054302.GI1776@paquier.xyz
A set of failures in buildfarm machines are proving that this is not
quite ready yet because of another set of issues:
- MSVC scripts assume that REGRESS_OPTS can only use top_builddir. Some
test suites actually finish by using top_srcdir, like pg_stat_statements
which cause the regression tests to never run.
- Trying to enforce top_builddir does not work either when using VPATH
as this is not recognized properly.
- TAP tests of bloom are unstable on various platforms, causing various
failures.
The following options are added for extensions:
- TAP_TESTS, to allow an extention to run TAP tests which are the ones
present in t/*.pl. A subset of tests can always be run with the
existing PROVE_TESTS for developers.
- ISOLATION, to define a list of isolation tests.
- ISOLATION_OPTS, to pass custom options to isolation_tester.
A couple of custom Makefile targets have been accumulated across the
tree to cover the lack of facility in PGXS for a couple of releases when
using those test suites, which are all now replaced with the new flags,
without reducing the test coverage. This also fixes an issue with
contrib/bloom/, which had a custom target to trigger its TAP tests of
its own not part of the main check runs.
Author: Michael Paquier
Reviewed-by: Adam Berlin, Álvaro Herrera, Tom Lane, Nikolay Shaplov,
Arthur Zakirov
Discussion: https://postgr.es/m/20180906014849.GG2726@paquier.xyz
Users of the WaitEventSet and WaitLatch() APIs can now choose between
asking for WL_POSTMASTER_DEATH and then handling it explicitly, or asking
for WL_EXIT_ON_PM_DEATH to trigger immediate exit on postmaster death.
This reduces code duplication, since almost all callers want the latter.
Repair all code that was previously ignoring postmaster death completely,
or requesting the event but ignoring it, or requesting the event but then
doing an unconditional PostmasterIsAlive() call every time through its
event loop (which is an expensive syscall on platforms for which we don't
have USE_POSTMASTER_DEATH_SIGNAL support).
Assert that callers of WaitLatchXXX() under the postmaster remember to
ask for either WL_POSTMASTER_DEATH or WL_EXIT_ON_PM_DEATH, to prevent
future bugs.
The only process that doesn't handle postmaster death is syslogger. It
waits until all backends holding the write end of the syslog pipe
(including the postmaster) have closed it by exiting, to be sure to
capture any parting messages. By using the WaitEventSet API directly
it avoids the new assertion, and as a by-product it may be slightly
more efficient on platforms that have epoll().
Author: Thomas Munro
Reviewed-by: Kyotaro Horiguchi, Heikki Linnakangas, Tom Lane
Discussion: https://postgr.es/m/CAEepm%3D1TCviRykkUb69ppWLr_V697rzd1j3eZsRMmbXvETfqbQ%40mail.gmail.com,
https://postgr.es/m/CAEepm=2LqHzizbe7muD7-2yHUbTOoF7Q+qkSD5Q41kuhttRTwA@mail.gmail.com
Previously tables declared WITH OIDS, including a significant fraction
of the catalog tables, stored the oid column not as a normal column,
but as part of the tuple header.
This special column was not shown by default, which was somewhat odd,
as it's often (consider e.g. pg_class.oid) one of the more important
parts of a row. Neither pg_dump nor COPY included the contents of the
oid column by default.
The fact that the oid column was not an ordinary column necessitated a
significant amount of special case code to support oid columns. That
already was painful for the existing, but upcoming work aiming to make
table storage pluggable, would have required expanding and duplicating
that "specialness" significantly.
WITH OIDS has been deprecated since 2005 (commit ff02d0a05280e0).
Remove it.
Removing includes:
- CREATE TABLE and ALTER TABLE syntax for declaring the table to be
WITH OIDS has been removed (WITH (oids[ = true]) will error out)
- pg_dump does not support dumping tables declared WITH OIDS and will
issue a warning when dumping one (and ignore the oid column).
- restoring an pg_dump archive with pg_restore will warn when
restoring a table with oid contents (and ignore the oid column)
- COPY will refuse to load binary dump that includes oids.
- pg_upgrade will error out when encountering tables declared WITH
OIDS, they have to be altered to remove the oid column first.
- Functionality to access the oid of the last inserted row (like
plpgsql's RESULT_OID, spi's SPI_lastoid, ...) has been removed.
The syntax for declaring a table WITHOUT OIDS (or WITH (oids = false)
for CREATE TABLE) is still supported. While that requires a bit of
support code, it seems unnecessary to break applications / dumps that
do not use oids, and are explicit about not using them.
The biggest user of WITH OID columns was postgres' catalog. This
commit changes all 'magic' oid columns to be columns that are normally
declared and stored. To reduce unnecessary query breakage all the
newly added columns are still named 'oid', even if a table's column
naming scheme would indicate 'reloid' or such. This obviously
requires adapting a lot code, mostly replacing oid access via
HeapTupleGetOid() with access to the underlying Form_pg_*->oid column.
The bootstrap process now assigns oids for all oid columns in
genbki.pl that do not have an explicit value (starting at the largest
oid previously used), only oids assigned later by oids will be above
FirstBootstrapObjectId. As the oid column now is a normal column the
special bootstrap syntax for oids has been removed.
Oids are not automatically assigned during insertion anymore, all
backend code explicitly assigns oids with GetNewOidWithIndex(). For
the rare case that insertions into the catalog via SQL are called for
the new pg_nextoid() function can be used (which only works on catalog
tables).
The fact that oid columns on system tables are now normal columns
means that they will be included in the set of columns expanded
by * (i.e. SELECT * FROM pg_class will now include the table's oid,
previously it did not). It'd not technically be hard to hide oid
column by default, but that'd mean confusing behavior would either
have to be carried forward forever, or it'd cause breakage down the
line.
While it's not unlikely that further adjustments are needed, the
scope/invasiveness of the patch makes it worthwhile to get merge this
now. It's painful to maintain externally, too complicated to commit
after the code code freeze, and a dependency of a number of other
patches.
Catversion bump, for obvious reasons.
Author: Andres Freund, with contributions by John Naylor
Discussion: https://postgr.es/m/20180930034810.ywp2c7awz7opzcfr@alap3.anarazel.de
The "rb" prefix is used by Ruby, so that our existing code results
in name collisions that break plruby. We discussed ways to prevent
that by adjusting dynamic linker options, but it seems that at best
we'd move the pain to other cases. Renaming to avoid the collision
is the only portable fix anyway. Fortunately, our rbtree code is
not (yet?) widely used --- in core, there's only a single usage
in GIN --- so it seems likely that we can get away with a rename.
I chose to do this basically as s/rb/rbt/g, except for places where
there already was a "t" after "rb". The patch could have been made
smaller by only touching linker-visible symbols, but it would have
resulted in oddly inconsistent-looking code. Better to make it look
like "rbt" was the plan all along.
Back-patch to v10. The rbtree.c code exists back to 9.5, but
rb_iterate() which is the actual immediate source of pain was added
in v10, so it seems like changing the names before that would have
more risk than benefit.
Per report from Pavel Raiskup.
Discussion: https://postgr.es/m/4738198.8KVIIDhgEB@nb.usersys.redhat.com
Index DDL cascading on partitioned tables introduced a way for ALTER
TABLE to be called reentrantly. This caused an an important deficiency
in event trigger support to be exposed: on exiting the reentrant call,
the alter table state object was clobbered, causing a crash when the
outer alter table tries to finalize its processing. Fix the crash by
creating a stack of event trigger state objects. There are still ways
to cause things to misbehave (and probably other crashers) with more
elaborate tricks, but at least it now doesn't crash in the obvious
scenario.
Backpatch to 9.5, where DDL deparsing of event triggers was introduced.
Reported-by: Marco Slot
Authors: Michaël Paquier, Álvaro Herrera
Discussion: https://postgr.es/m/CANNhMLCpi+HQ7M36uPfGbJZEQLyTy7XvX=5EFkpR-b1bo0uJew@mail.gmail.com
Add RangeTblEntry.rellockmode, which records the appropriate lock mode for
each RTE_RELATION rangetable entry (either AccessShareLock, RowShareLock,
or RowExclusiveLock depending on the RTE's role in the query).
This patch creates the field and makes all creators of RTE nodes fill it
in reasonably, but for the moment nothing much is done with it. The plan
is to replace assorted post-parser logic that re-determines the right
lockmode to use with simple uses of rte->rellockmode. For now, just add
Asserts in each of those places that the rellockmode matches what they are
computing today. (In some cases the match isn't perfect, so the Asserts
are weaker than you might expect; but this seems OK, as per discussion.)
This passes check-world for me, but it seems worth pushing in this state
to see if the buildfarm finds any problems in cases I failed to test.
catversion bump due to change of stored rules.
Amit Langote, reviewed by David Rowley and Jesper Pedersen,
and whacked around a bit more by me
Discussion: https://postgr.es/m/468c85d9-540e-66a2-1dde-fec2b741e688@lab.ntt.co.jp
The activation and deactivation of commit timestamp tracking has not
been handled consistently for a primary or standbys at recovery. The
facility can be activated at three different moments of recovery:
- The beginning, where a primary would use the GUC value for the
decision-making, and where a standby relies on the contents of the
control file.
- When replaying a XLOG_PARAMETER_CHANGE record at redo.
- The end, where both primary and standby rely on the GUC value.
Using the GUC value for a primary at the beginning of recovery causes
problems with commit timestamp access when doing crash recovery.
Particularly, when replaying transaction commits, it could be possible
that an attempt to read commit timestamps is done for a transaction
which committed at a moment when track_commit_timestamp was disabled.
A test case is added to reproduce the failure. The test works down to
v11 as it takes advantage of transaction commits within procedures.
Reported-by: Hailong Li
Author: Masahiko Sawasa, Michael Paquier
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/11224478-a782-203b-1f17-e4797b39bdf0@qunar.com
Backpatch-through: 9.5, where commit timestamps have been introduced.
Historically, we've allowed auxiliary processes to take buffer pins without
tracking them in a ResourceOwner. However, that creates problems for error
recovery. In particular, we've seen multiple reports of assertion crashes
in the startup process when it gets an error while holding a buffer pin,
as for example if it gets ENOSPC during a write. In a non-assert build,
the process would simply exit without releasing the pin at all. We've
gotten away with that so far just because a failure exit of the startup
process translates to a database crash anyhow; but any similar behavior
in other aux processes could result in stuck pins and subsequent problems
in vacuum.
To improve this, institute a policy that we must *always* have a resowner
backing any attempt to pin a buffer, which we can enforce just by removing
the previous special-case code in resowner.c. Add infrastructure to make
it easy to create a process-lifespan AuxProcessResourceOwner and clear
out its contents at appropriate times. Replace existing ad-hoc resowner
management in bgwriter.c and other aux processes with that. (Thus, while
the startup process gains a resowner where it had none at all before, some
other aux process types are replacing an ad-hoc resowner with this code.)
Also use the AuxProcessResourceOwner to manage buffer pins taken during
StartupXLOG and ShutdownXLOG, even when those are being run in a bootstrap
process or a standalone backend rather than a true auxiliary process.
In passing, remove some other ad-hoc resource owner creations that had
gotten cargo-culted into various other places. As far as I can tell
that was all unnecessary, and if it had been necessary it was incomplete,
due to lacking any provision for clearing those resowners later.
(Also worth noting in this connection is that a process that hasn't called
InitBufferPoolBackend has no business accessing buffers; so there's more
to do than just add the resowner if we want to touch buffers in processes
not covered by this patch.)
Although this fixes a very old bug, no back-patch, because there's no
evidence of any significant problem in non-assert builds.
Patch by me, pursuant to a report from Justin Pryzby. Thanks to
Robert Haas and Kyotaro Horiguchi for reviews.
Discussion: https://postgr.es/m/20180627233939.GA10276@telsasoft.com
The vertical tightness settings collapse vertical whitespace between
opening and closing brackets (parentheses, square brakets and braces).
This can make data structures in particular harder to read, and is not
very consistent with our style in non-Perl code. This patch restricts
that setting to parentheses only, and reformats all the perl code
accordingly. Not applying this to parentheses has some unfortunate
effects, so the consensus is to keep the setting for parentheses and not
for the others.
The diff for this patch does highlight some places where structures
should have trailing commas. They can be added manually, as there is no
automatic tool to do so.
Discussion: https://postgr.es/m/a2f2b87c-56be-c070-bfc0-36288b4b41c1@2ndQuadrant.com
Commit 372728b0d created some problems for usages like building a
subdirectory without having first done "make all" at the top level,
or for proceeding directly to "make install" without "make all".
The only reasonably clean way to fix this seems to be to force the
submake-generated-headers rule to fire in *any* "make all" or "make
install" command anywhere in the tree. To avoid lots of redundant work,
as well as parallel make jobs possibly clobbering each others' output, we
still need to be sure that the rule fires only once in a recursive build.
For that, adopt the same MAKELEVEL hack previously used for "temp-install".
But try to document it a bit better.
The submake-errcodes mechanism previously used in src/port/ and src/common/
is subsumed by this, so we can get rid of those special cases. It was
inadequate for src/common/ anyway after the aforesaid commit, and it always
risked parallel attempts to build errcodes.h.
Discussion: https://postgr.es/m/E1f5FAB-0006LU-MB@gemulon.postgresql.org
Everything of use to frontend code should now appear in the _d.h files,
and making this change frees us from needing to worry about whether the
catalog header files proper are frontend-safe.
Remove src/interfaces/ecpg/ecpglib/pg_type.h entirely, as the previous
commit reduced it to a confusingly-named wrapper around pg_type_d.h.
In passing, make test_rls_hooks.c follow project convention of including
our own files with #include "" not <>.
Discussion: https://postgr.es/m/23690.1523031777@sss.pgh.pa.us
This reworks how the tests to run are defined. Instead of having to
define all runs for all tests, we define those tests which should pass
(generally using one of the defined broad hashes), add in any which
should be specific for this test, and exclude any specific runs that
shouldn't pass for this test. This ends up removing some 4k+ lines
(more than half the file) but, more importantly, greatly simplifies the
way runs-to-be-tested are defined.
As discussed in the updated comments, for example, take the test which
does CREATE TABLE test_table. That CREATE TABLE should show up in all
'full' runs of pg_dump, except those cases where 'test_table' is
excluded, of course, and that's exactly how the test gets defined now
(modulo a few other related cases, like where we dump only that table,
or we dump the schema it's in, or we exclude the schema it's in):
like => {
%full_runs,
%dump_test_schema_runs,
only_dump_test_table => 1,
section_pre_data => 1, },
unlike => {
exclude_dump_test_schema => 1,
exclude_test_table => 1, }, },
Next, we no longer expect every run to be listed for every test. If a
run is listed in 'like' (directly or through a hash) then it's a 'like',
unless it's listed in 'unlike' in which case it's an 'unlike'. If it
isn't listed in either, then it's considered an 'unlike' automatically.
Lastly, this changes the code to no longer use like/unlike but rather to
use 'ok()' with 'diag()' which allows much more control over what gets
spit out to the screen. Gone are the days of the entire dump being sent
to the console, now you'll just get a couple of lines for each failing
test which say the test that failed and the run that it failed on.
This covers both the pg_dump TAP tests in src/bin/pg_dump and those in
src/test/modules/test_pg_dump.
Make buffer 1 byte larger to fit a sign. It's actually impossible for
there to be a sign in practice, but this is still required to keep GCC 7
happy.
Cleanup from commit 51bc271790.
Based on a suggestion from Peter Eisentraut.
Author: Peter Geoghegan
Reported-By: Peter Eisentraut
Discussion: https://postgr.es/m/d1cc82ed-d07d-cef2-7c00-2e987f121648@2ndquadrant.com
A Bloom filter is a space-efficient, probabilistic data structure that
can be used to test set membership. Callers will sometimes incur false
positives, but never false negatives. The rate of false positives is a
function of the total number of elements and the amount of memory
available for the Bloom filter.
Two classic applications of Bloom filters are cache filtering, and data
synchronization testing. Any user of Bloom filters must accept the
possibility of false positives as a cost worth paying for the benefit in
space efficiency.
This commit adds a test harness extension module, test_bloomfilter. It
can be used to get a sense of how the Bloom filter implementation
performs under varying conditions.
This is infrastructure for the upcoming "heapallindexed" amcheck patch,
which verifies the consistency of a heap relation against one of its
indexes.
Author: Peter Geoghegan
Reviewed-By: Andrey Borodin, Michael Paquier, Thomas Munro, Andres Freund
Discussion: https://postgr.es/m/CAH2-Wzm5VmG7cu1N-H=nnS57wZThoSDQU+F5dewx3o84M+jY=g@mail.gmail.com
Currently, if operator_predicate_proof() is given an operator clause like
"something op NULL", it just throws up its hands and reports it can't prove
anything. But we can often do better than that, if the operator is strict,
because then we know that the clause returns NULL overall. Depending on
whether we're trying to prove or refute something, and whether we need
weak or strong semantics for NULL, this may be enough to prove the
implication, especially when we rely on the standard rule that "false
implies anything". In particular, this lets us do something useful with
questions like "does X IN (1,3,5,NULL) imply X <= 5?" The null entry
in the IN list can effectively be ignored for this purpose, but the
proof rules were not previously smart enough to deduce that.
This patch is by me, but it owes something to previous work by
Amit Langote to try to solve problems of the form mentioned.
Thanks also to Emre Hasegeli and Ashutosh Bapat for review.
Discussion: https://postgr.es/m/3bad48fc-f257-c445-feeb-8a2b2fb622ba@lab.ntt.co.jp
One of the things canonicalize_qual() does is to remove constant-NULL
subexpressions of top-level AND/OR clauses. It does that on the assumption
that what it's given is a top-level WHERE clause, so that NULL can be
treated like FALSE. Although this is documented down inside a subroutine
of canonicalize_qual(), it wasn't mentioned in the documentation of that
function itself, and some callers hadn't gotten that memo.
Notably, commit d007a9505 caused get_relation_constraints() to apply
canonicalize_qual() to CHECK constraints. That allowed constraint
exclusion to misoptimize situations in which a CHECK constraint had a
provably-NULL subclause, as seen in the regression test case added here,
in which a child table that should be scanned is not. (Although this
thinko is ancient, the test case doesn't fail before 9.2, for reasons
I've not bothered to track down in detail. There may be related cases
that do fail before that.)
More recently, commit f0e44751d added an independent bug by applying
canonicalize_qual() to index expressions, which is even sillier since
those might not even be boolean. If they are, though, I think this
could lead to making incorrect index entries for affected index
expressions in v10. I haven't attempted to prove that though.
To fix, add an "is_check" parameter to canonicalize_qual() to specify
whether it should assume WHERE or CHECK semantics, and make it perform
NULL-elimination accordingly. Adjust the callers to apply the right
semantics, or remove the call entirely in cases where it's not known
that the expression has one or the other semantics. I also removed
the call in some cases involving partition expressions, where it should
be a no-op because such expressions should be canonical already ...
and was a no-op, independently of whether it could in principle have
done something, because it was being handed the qual in implicit-AND
format which isn't what it expects. In HEAD, add an Assert to catch
that type of mistake in future.
This represents an API break for external callers of canonicalize_qual().
While that's intentional in HEAD to make such callers think about which
case applies to them, it seems like something we probably wouldn't be
thanked for in released branches. Hence, in released branches, the
extra parameter is added to a new function canonicalize_qual_ext(),
and canonicalize_qual() is a wrapper that retains its old behavior.
Patch by me with suggestions from Dean Rasheed. Back-patch to all
supported branches.
Discussion: https://postgr.es/m/24475.1520635069@sss.pgh.pa.us
Commit b08df9cab left things rather poorly documented as far as the
exact semantics of "clause_is_check" mode went. Also, that mode did
not really work correctly for predicate_refuted_by; although given the
lack of specification as to what it should do, as well as the lack
of any actual use-case, that's perhaps not surprising.
Rename "clause_is_check" to "weak" proof mode, and provide specifications
for what it should do. I defined weak refutation as meaning "truth of A
implies non-truth of B", which makes it possible to use the mode in the
part of relation_excluded_by_constraints that checks for mutually
contradictory WHERE clauses. Fix up several places that did things wrong
for that definition. (As far as I can see, these errors would only lead
to failure-to-prove, not incorrect claims of proof, making them not
serious bugs even aside from the fact that v10 contains no use of this
mode. So there seems no need for back-patching.)
In addition, teach predicate_refuted_by_recurse that it can use
predicate_implied_by_recurse after all when processing a strong NOT-clause,
so long as it asks for the correct proof strength. This is an optimization
that could have been included in commit b08df9cab, but wasn't.
Also, simplify and generalize the logic that checks for whether nullness of
the argument of IS [NOT] NULL would force overall nullness of the predicate
or clause. (This results in a change in the partition_prune test's output,
as it is now able to prune an all-nulls partition that it did not recognize
before.)
In passing, in PartConstraintImpliedByRelConstraint, remove bogus
conversion of the constraint list to explicit-AND form and then right back
again; that accomplished nothing except forcing a useless extra level of
recursion inside predicate_implied_by.
Discussion: https://postgr.es/m/5983.1520487191@sss.pgh.pa.us
I'd initially supposed that predicate_refuted_by(..., true) ought to
say that "A refutes B" means "non-falsity of A implies non-truth of B".
But it seems better to define it as "truth of A implies non-truth of B".
This is more useful in the current system, slightly easier to prove,
and in closer correspondence to the existing code behavior.
With this change, test_predtest no longer claims that any existing
test cases show false proof reports, though there still are cases
where we could prove something and fail to.
Discussion: https://postgr.es/m/5983.1520487191@sss.pgh.pa.us
The predicate-proof code in predtest.c is a bit hard to test as-is:
you have to construct a query whose plan changes depending on the success
of a test, and in tests that have been around for awhile, it's always
possible that the plan shape is now being determined by some other factor.
Our existing regression tests aren't doing real well at providing full
code coverage of predtest.c, either. So, let's add a small test module
that allows directly inspecting the results of predicate_implied_by()
and predicate_refuted_by() for arbitrary boolean expressions.
I chose the set of tests committed here in order to get reasonably
complete code coverage of predtest.c just from running this test
module, and to cover some cases called out as being interesting in
the existing comments. We might want to add more later. But this
set already shows a few cases where perhaps things could be improved.
Indeed, this exercise proves that predicate_refuted_by() is buggy for
the case of clause_is_check = true, though fortunately we aren't using
that case anywhere yet. I'll look into doing something about that in
a separate commit. For now, just memorialize the current behavior.
Discussion: https://postgr.es/m/5983.1520487191@sss.pgh.pa.us
Historically, pg_dump has "set search_path = foo, pg_catalog" when
dumping an object in schema "foo", and has also caused that setting
to be used while restoring the object. This is problematic because
functions and operators in schema "foo" could capture references meant
to refer to pg_catalog entries, both in the queries issued by pg_dump
and those issued during the subsequent restore run. That could
result in dump/restore misbehavior, or in privilege escalation if a
nefarious user installs trojan-horse functions or operators.
This patch changes pg_dump so that it does not change the search_path
dynamically. The emitted restore script sets the search_path to what
was used at dump time, and then leaves it alone thereafter. Created
objects are placed in the correct schema, regardless of the active
search_path, by dint of schema-qualifying their names in the CREATE
commands, as well as in subsequent ALTER and ALTER-like commands.
Since this change requires a change in the behavior of pg_restore
when processing an archive file made according to this new convention,
bump the archive file version number; old versions of pg_restore will
therefore refuse to process files made with new versions of pg_dump.
Security: CVE-2018-1058
AclObjectKind was basically just another enumeration for object types,
and we already have a preferred one for that. It's only used in
aclcheck_error. By using ObjectType instead, we can also give some more
precise error messages, for example "index" instead of "relation".
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
It's become apparent during testing that there are problems with at
least the testing regime. I don't think we should have it without a
working test regime, and the difficulties might indicate implementation
problems anyway, so I'm backing out the whole thing until that's sorted
out.
This reverts commits 74594849989f92cd8ce3a
The module requires a preloaded library and the defect can't be cured by
a LOAD instruction in the test script. To achieve this we override the
installcheck target in the module's Makefile, and exclude ithe module in
vcregress.pl.
Along the way, revert commit 9989f92aab.
Makefile.global assigns this prerequisite to every target named "check",
but similar targets must mention it explicitly. Affected targets
failed, tested $PATH binaries, or tested a stale temporary installation.
The src/test/modules examples worked properly when called as "make -C
src/test/modules/$FOO check", but "make -j" allowed the test to start
before the temporary installation was in place. Back-patch to 9.5,
where commit dcae5facca introduced the
shared temp-install.
I noticed the tmp_check subdirectory wasn't getting cleaned up
after a check-world run. Apparently pgxs.mk will only do this
for you if you've defined REGRESS. The only other src/test/modules
Makefile that does not set that is snapshot_too_old, and it
does it like this.
Add bgw_type field to background worker structure. It is intended to be
set to the same value for all workers of the same type, so they can be
grouped in pg_stat_activity, for example.
The backend_type column in pg_stat_activity now shows bgw_type for a
background worker. The ps listing also no longer calls out that a
process is a background worker but just show the bgw_type. That way,
being a background worker is more of an implementation detail now that
is not shown to the user. However, most log messages still refer to
'background worker "%s"'; otherwise constructing sensible and
translatable log messages would become tricky.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
This improves the regression tests' coverage of rbtree.c from pretty
awful (because some of the functions aren't used yet) to basically 100%.
Victor Drobny, reviewed by Aleksander Alekseev and myself
Discussion: https://postgr.es/m/c9d61310e16e75f8acaf6cb1c48b7b77@postgrespro.ru
Several callers of PostgresNode::poll_query_until() neglected to check
for failure; I do not think that's optional. Also, rewrite one place
that had reinvented poll_query_until() for no very good reason.
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The larger part of this patch replaces usages of MyProc->procLatch
with MyLatch. The latter works even early during backend startup,
where MyProc->procLatch doesn't yet. While the affected code
shouldn't run in cases where it's not initialized, it might get copied
into places where it might. Using MyLatch is simpler and a bit faster
to boot, so there's little point to stick with the previous coding.
While doing so I noticed some weaknesses around newly introduced uses
of latches that could lead to missed events, and an omitted
CHECK_FOR_INTERRUPTS() call in worker_spi.
As all the actual bugs are in v10 code, there doesn't seem to be
sufficient reason to backpatch this.
Author: Andres Freund
Discussion:
https://postgr.es/m/20170606195321.sjmenrfgl2nu6j63@alap3.anarazel.dehttps://postgr.es/m/20170606210405.sim3yl6vpudhmufo@alap3.anarazel.de
Backpatch: -
Given the possibility of race conditions and so on, it seems entirely
unsafe to just assume that shm_toc_lookup() always finds the key it's
looking for --- but that was exactly what all but one call site were
doing. To fix, add a "bool noError" argument, similarly to what we
have in many other functions, and throw an error on an unexpected
lookup failure. Remove now-redundant Asserts that a rather random
subset of call sites had.
I doubt this will throw any light on buildfarm member lorikeet's
recent failures, because if an unnoticed lookup failure were involved,
you'd kind of expect a null-pointer-dereference crash rather than the
observed symptom. But you never know ... and this is better coding
practice even if it never catches anything.
Discussion: https://postgr.es/m/9697.1496675981@sss.pgh.pa.us
For CREATE/ALTER PUBLICATION/SUBSCRIPTION, use similar option style as
other statements that use a WITH clause for options.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Per discussion, "location" is a rather vague term that could refer to
multiple concepts. "LSN" is an unambiguous term for WAL locations and
should be preferred. Some function names, view column names, and function
output argument names used "lsn" already, but others used "location",
as well as yet other terms such as "wal_position". Since we've already
renamed a lot of things in this area from "xlog" to "wal" for v10,
we may as well incur a bit more compatibility pain and make these names
all consistent.
David Rowley, minor additional docs hacking by me
Discussion: https://postgr.es/m/CAKJS1f8O0njDKe8ePFQ-LK5-EjwThsDws6ohJ-+c6nWK+oUxtg@mail.gmail.com
It turned out this approach had problems, because a DROP command should
not have any options other than CASCADE and RESTRICT. Instead, always
attempt to drop the slot if there is one configured, but also add an
ALTER SUBSCRIPTION action to set the slot to NONE.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/29431.1493730652@sss.pgh.pa.us
Due to a missing CommandCounterIncrement() call, parsing of a non-utility
command in an extension script would not see the effects of the immediately
preceding DDL command, unless that command's execution ends with
CommandCounterIncrement() internally ... which some do but many don't.
Report by Philippe Beaudoin, diagnosis by Julien Rouhaud.
Rather remarkably, this bug has evaded detection since extensions were
invented, so back-patch to all supported branches.
Discussion: https://postgr.es/m/2cf7941e-4e41-7714-3de8-37b1a8f74dff@free.fr
Although the documentation for append_conf said clearly that it didn't
add a newline, many test authors seem to have forgotten that ... or maybe
they just consulted the example at the top of the POD documentation,
which clearly shows adding a config entry without bothering to add a
trailing newline. The worst part of that is that it works, as long as
you don't do it more than once, since the backend isn't picky about
whether config files end with newlines. So there's not a strong forcing
function reminding test authors not to do it like that. Upshot is that
this is a terribly fragile way to go about things, and there's at least
one existing test case that is demonstrably broken and not testing what
it thinks it is.
Let's just make append_conf append a newline, instead; that is clearly
way safer than the old definition.
I also cleaned up a few call sites that were unnecessarily ugly.
(I left things alone in places where it's plausible that additional
config lines would need to be added someday.)
Back-patch the change in append_conf itself to 9.6 where it was added,
as having a definitional inconsistency between branches would obviously
be pretty hazardous for back-patching TAP tests. The other changes are
just cosmetic and don't need to be back-patched.
Discussion: https://postgr.es/m/19751.1492892376@sss.pgh.pa.us
Coverity complained because bgw.bgw_extra wasn't being filled in by
ApplyLauncherRegister(). The most future-proof fix is to memset the
whole BackgroundWorker struct to zeroes. While at it, let's apply the
same coding rule to other places that set up BackgroundWorker structs;
four out of five had the same or related issues.
Commit 96a7128b made pg_dump and pg_dumpall sync their output by
default. However, there's no great need for that in testing, and it
could impose a performance penalty, so we add the --no-sync flag to most
of the test cases.
Michael Paquier
On EXEC_BACKEND builds, this can fail if ASLR is in use.
Backpatch to 9.5. On master, completely remove the bgw_main field
completely, since there is no situation in which it is safe for an
EXEC_BACKEND build. On 9.6 and 9.5, leave the field intact to avoid
breaking things for third-party code that doesn't care about working
under EXEC_BACKEND. Prior to 9.5, there are no in-core bgworker
entrypoints.
Petr Jelinek, reviewed by me.
Discussion: http://postgr.es/m/09d8ad33-4287-a09b-a77f-77f8761adb5e@2ndquadrant.com
Previously if a directory had both isolationtester and plain
regression tests, they couldn't be run in parallel, because they'd
access the same files/directories. That, so far, only affected
contrib/test_decoding.
Rather than fix that locally in contrib/test_decoding, improve
pg_regress_isolation_[install]check to use separate resources from
plain regression tests.
That requires a minor change in pg_regress, namely that the
--outputdir is created if not already existing, that seems like good
idea anyway.
Use the improved helpers even where previously not used.
Author: Tom Lane and Andres Freund
Discussion: https://postgr.es/m/20170311194831.vm5ikpczq52c2drg@alap3.anarazel.de
This module was intended to ease migrations of applications that used
the pre-8.3 version of text search to the in-core version introduced
in that release. However, since all pre-8.3 releases of the database
have been out of support for more than 5 years at this point, we
expect that few people are depending on it at this point. If some
people still need it, nothing prevents it from being maintained as a
separate extension, outside of core.
Discussion: http://postgr.es/m/CA+Tgmob5R8aDHiFRTQsSJbT1oreKg2FOSBrC=2f4tqEH3dOMAg@mail.gmail.com
This stores a data type, required to be an integer type, with the
sequence. The sequences min and max values default to the range
supported by the type, and they cannot be set to values exceeding that
range. The internal implementation of the sequence is not affected.
Change the serial types to create sequences of the appropriate type.
This makes sure that the min and max values of the sequence for a serial
column match the range of values supported by the table column. So the
sequence can no longer overflow the table column.
This also makes monitoring for sequence exhaustion/wraparound easier,
which currently requires various contortions to cross-reference the
sequences with the table columns they are used with.
This commit also effectively reverts the pg_sequence column reordering
in f3b421da5f, because the new seqtypid
column allows us to fill the hole in the struct and create a more
natural overall column ordering.
Reviewed-by: Steve Singer <steve@ssinger.info>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Commit f82ec32ac3 renamed the pg_xlog
directory to pg_wal. To make things consistent, and because "xlog" is
terrible terminology for either "transaction log" or "write-ahead log"
rename all SQL-callable functions that contain "xlog" in the name to
instead contain "wal". (Note that this may pose an upgrade hazard for
some users.)
Similarly, rename the xlog_position argument of the functions that
create slots to be called wal_position.
Discussion: https://www.postgresql.org/message-id/CA+Tgmob=YmA=H3DbW1YuOXnFVgBheRmyDkWcD9M8f=5bGWYEoQ@mail.gmail.com
As pointed out by Alvaro, we actually use perltidy on the perl scripts
in the source tree, so go back to the results of a perltidy run for the
test_pg_dump TAP script.
To make it look slightly less tragic, I changed most of the independent
arguments into long-form single arguments (eg: -f file.sql changed to be
--file=file.sql) to avoid having them confusingly split across lines due
to perltidy.
Back-patch to 9.6, as the last patch was.
In commit 6c268df, pg_init_privs was added to track the initial
privileges of catalog objects and extensions. Unfortunately, that
commit didn't include understanding of ALTER EXTENSION ADD/DROP, which
allows the objects associated with an extension to be changed after the
initial CREATE EXTENSION script has been run.
The result of this meant that ACLs for objects added through
ALTER EXTENSION ADD were not recorded into pg_init_privs and we would
end up including those ACLs in pg_dump when we shouldn't have.
This commit corrects that by making sure to have pg_init_privs updated
when ALTER EXTENSION ADD/DROP is run, recording the permissions as they
are at ALTER EXTENSION ADD time, and removing any if/when ALTER
EXTENSION DROP is called.
This issue was pointed out by Moshe Jacobson as commentary on bug #14456
(which was actually a bug about versions prior to 9.6 not handling
custom ACLs on extensions correctly, an issue now addressed with
pg_init_privs in 9.6).
Back-patch to 9.6 where pg_init_privs was introduced.
The formatting of the perl hashes used in the TAP tests for test_pg_dump
was rather horribly inconsistent and made it more difficult than it
really should have been to add new tests or adjust what tests are for
what runs, etc.
Reformat to clean that all up.
Whitespace-only changes.
Our current DDL only allows a database name to be specified in COMMENT
ON DATABASE, which Andrew Dunstan reports to make this test fail on the
buildfarm. Remove the line until we gain a DDL command that allows the
current database to be operated on without having the specify it by
name.
Backpatch to 9.5, where these tests appeared.
Discussion: https://postgr.es/m/e6084b89-07a7-7e57-51ee-d7b8fc9ec864@2ndQuadrant.com
When considering a sequence's Data entry in dumpSequenceData, we were
actually looking at the sequence definition's dump flag to decide if we
should dump the data or not. That's generally fine, except for when the
sequence data entry was created by processExtensionTables() because it's
a config sequence. In that case, the sequence itself won't be marked as
dumping data because it's part of an extension, leading to the need for
processExtensionTables() to create the sequence data entry.
This leads to extension config sequence data not being included in the
dump when it should be. Fix this by looking at the sequence data's dump
flag instead, just as dumpTableData() was doing for tables (which is why
config tables were correctly being handled), and add a regression test
to make sure we don't break it moving forward.
All of this is a bit round-about since we can now represent which
components of a given dump item should be dumped out through the dump
flag. A future improvement might be to change checkExtensionMembership()
to check for config sequences/tables and set the dump flag based on that
directly, possibly removing the need for processExtensionTables().
Bug found by Daniele Varrazzo.
Discussion: https://postgr.es/m/CA+mi_8ZmxQM7+nZ7pJ8uyfxc9V3o=UAG14dVqvftdmvw8OJ3gQ@mail.gmail.com
Patch by Michael Paquier, with some tweaking of the regression tests by
me.
Back-patch to 9.6 where the bug was introduced.
In an RLS query, we must ensure that security filter quals are evaluated
before ordinary query quals, in case the latter contain "leaky" functions
that could expose the contents of sensitive rows. The original
implementation of RLS planning ensured this by pushing the scan of a
secured table into a sub-query that it marked as a security-barrier view.
Unfortunately this results in very inefficient plans in many cases, because
the sub-query cannot be flattened and gets planned independently of the
rest of the query.
To fix, drop the use of sub-queries to enforce RLS qual order, and instead
mark each qual (RestrictInfo) with a security_level field establishing its
priority for evaluation. Quals must be evaluated in security_level order,
except that "leakproof" quals can be allowed to go ahead of quals of lower
security_level, if it's helpful to do so. This has to be enforced within
the ordering of any one list of quals to be evaluated at a table scan node,
and we also have to ensure that quals are not chosen for early evaluation
(i.e., use as an index qual or TID scan qual) if they're not allowed to go
ahead of other quals at the scan node.
This is sufficient to fix the problem for RLS quals, since we only support
RLS policies on simple tables and thus RLS quals will always exist at the
table scan level only. Eventually these qual ordering rules should be
enforced for join quals as well, which would permit improving planning for
explicit security-barrier views; but that's a task for another patch.
Note that FDWs would need to be aware of these rules --- and not, for
example, send an insecure qual for remote execution --- but since we do
not yet allow RLS policies on foreign tables, the case doesn't arise.
This will need to be addressed before we can allow such policies.
Patch by me, reviewed by Stephen Frost and Dean Rasheed.
Discussion: https://postgr.es/m/8185.1477432701@sss.pgh.pa.us
This changes the default values of the following parameters:
wal_level = replica
max_wal_senders = 10
max_replication_slots = 10
in order to make it possible to make a backup and set up simple
replication on the default settings, without requiring a system restart.
Discussion: https://postgr.es/m/CABUevEy4PR_EAvZEzsbF5s+V0eEvw7shJ2t-AUwbHOjT+yRb3A@mail.gmail.com
Reviewed by Peter Eisentraut. Benchmark help from Tomas Vondra.
The different actions in pg_ctl had different defaults for -w and -W,
mostly for historical reasons. Most users will want the -w behavior, so
make that the default.
Remove the -w option in most example and test code, so avoid confusion
and reduce verbosity. pg_upgrade is not touched, so it can continue to
work with older installations.
Reviewed-by: Beena Emerson <memissemerson@gmail.com>
Reviewed-by: Ryan Murphy <ryanfmurphy@gmail.com>
When we are altering a text search configuration, we are getting the
tuple from pg_ts_config and using its OID, so use TSConfigRelationId
when invoking any post-alter hooks and setting the object address.
Further, in the functions called from AlterTSConfiguration(), we're
saving information about the command via
EventTriggerCollectAlterTSConfig(), so we should be setting
commandCollected to true. Also add a regression test to
test_ddl_deparse for ALTER TEXT SEARCH CONFIGURATION.
Author: Artur Zakirov, a few additional comments by me
Discussion: https://www.postgresql.org/message-id/57a71eba-f2c7-e7fd-6fc0-2126ec0b39bd%40postgrespro.ru
Back-patch the fix for the InvokeObjectPostAlterHook() call to 9.3 where
it was introduced, and the fix for the ObjectAddressSet() call and
setting commandCollected to true to 9.5 where those changes to
ProcessUtilitySlow() were introduced.
Must do pg_stat_clear_snapshot() inside test's loop, or our snapshot of
pg_stat_activity will never change :-(. Thinko in b3427dade -- evidently
my workstation never really iterated the loop in testing. Per buildfarm.
deleteWhatDependsOn() had grown an uncomfortably large number of
assumptions about what it's used for. There are actually only two minor
differences between what it does and what a regular performDeletion() call
can do, so let's invent additional bits in performDeletion's existing flags
argument that specify those behaviors, and get rid of deleteWhatDependsOn()
as such. (We'd probably have done it this way from the start, except that
performDeletion didn't originally have a flags argument, IIRC.)
Also, add a SKIP_EXTENSIONS flag bit that prevents ever recursing to an
extension, and use that when dropping temporary objects at session end.
This provides a more general solution to the problem addressed in a hacky
way in commit 08dd23cec: if an extension script creates temp objects and
forgets to remove them again, the whole extension went away when its
contained temp objects were deleted. The previous solution only covered
temp relations, but this solves it for all object types.
These changes require minor additions in dependency.c to pass the flags
to subroutines that previously didn't get them, but it's still a net
savings of code, and it seems cleaner than before.
Having done this, revert the special-case code added in 08dd23cec that
prevented addition of pg_depend records for temp table extension
membership, because that caused its own oddities: dropping an extension
that had created such a table didn't automatically remove the table,
leading to a failure if the table had another dependency on the extension
(such as use of an extension data type), or to a duplicate-name failure if
you then tried to recreate the extension. But we keep the part that
prevents the pg_temp_nnn schema from becoming an extension member; we never
want that to happen. Add a regression test case covering these behaviors.
Although this fixes some arguable bugs, we've heard few field complaints,
and any such problems are easily worked around by explicitly dropping temp
objects at the end of extension scripts (which seems like good practice
anyway). So I won't risk a back-patch.
Discussion: https://postgr.es/m/e51f4311-f483-4dd0-1ccc-abec3c405110@BlueTreble.com
Commit 08dd23cec introduced an exception to the rule that extension member
objects can only be dropped as part of dropping the whole extension,
intending to allow such drops while running the extension's own creation or
update scripts. However, the exception was only applied at the outermost
recursion level, because it was modeled on a pre-existing check to ignore
dependencies on objects listed in pendingObjects. Bug #14434 from Philippe
Beaudoin shows that this is inadequate: in some cases we can reach an
extension member object by recursion from another one. (The bug concerns
the serial-sequence case; I'm not sure if there are other cases, but there
might well be.)
To fix, revert 08dd23cec's changes to findDependentObjects() and instead
apply the creating_extension exception regardless of stack level.
Having seen this example, I'm a bit suspicious that the pendingObjects
logic is also wrong and such cases should likewise be allowed at any
recursion level. However, changing that would interact in subtle ways
with the recursion logic (at least it would need to be moved to after the
recursing-from check). Given that the code's been like that a long time,
I'll refrain from touching it without a clear example showing it's wrong.
Back-patch to all active branches. In HEAD and 9.6, where suitable
test infrastructure exists, add a regression test case based on the
bug report.
Report: <20161125151448.6529.33039@wrigleys.postgresql.org>
Discussion: <13224.1480177514@sss.pgh.pa.us>
Previously, requesting commit timestamp for transactions
FrozenTransactionId and BootstrapTransactionId resulted in an error.
But since those values can validly appear in committed tuples' Xmin,
this behavior is unhelpful and error prone: each caller would have to
special-case those values before requesting timestamp data for an Xid.
We already have a perfectly good interface for returning "the Xid you
requested is too old for us to have commit TS data for it", so let's use
that instead.
Backpatch to 9.5, where commit timestamps appeared.
Author: Craig Ringer
Discussion: https://www.postgresql.org/message-id/CAMsr+YFM5Q=+ry3mKvWEqRTxrB0iU3qUSRnS28nz6FJYtBwhJg@mail.gmail.com
In each case, absence of a trailing newline would itself constitute a
PostgreSQL bug. Therefore, this slightly enhances the changed tests.
This works around a bug that last appeared in Perl 5.8.8, fixing
src/test/modules/test_pg_dump when run against that version. Commit
e7293e3271 worked around the bug, but the
subsequent addition of test_pg_dump introduced affected code. As that
commit had shown, slight increases in pattern complexity can suppress
the bug. This commit edits qr/foo$/m patterns too complex to encounter
the bug today, for style consistency and robustness against unrelated
pattern changes. Back-patch to 9.6, where test_pg_dump was introduced.
As of this writing, a fresh MSYS installation includes an affected Perl
5.8.8. The Perl 5.8.8 in Red Hat Enterprise Linux 5.11 carries a patch
that renders it unaffected, but the Perl 5.8.5 of Red Hat Enterprise
Linux 4.4 is affected.
An oversight in setting the boundaries of known commit timestamps during
startup caused old commit timestamps to become inaccessible after a
server restart.
Author and reporter: Julien Rouhaud
Review, test code: Craig Ringer
Windows apparently has a constant named WAIT_TIMEOUT, and some of these
other names are pretty generic, too. Insert "PG_" at the front of each
name in order to disambiguate.
Michael Paquier
WaitLatch, WaitLatchOrSocket, and WaitEventSetWait now taken an
additional wait_event_info parameter; legal values are defined in
pgstat.h. This makes it possible to uniquely identify every point in
the core code where we are waiting for a latch; extensions can pass
WAIT_EXTENSION.
Because latches were the major wait primitive not previously covered
by this patch, it is now possible to see information in
pg_stat_activity on a large number of important wait events not
previously addressed, such as ClientRead, ClientWrite, and SyncRep.
Unfortunately, many of the wait events added by this patch will fail
to appear in pg_stat_activity because they're only used in background
processes which don't currently appear in pg_stat_activity. We should
fix this either by creating a separate view for such information, or
else by deciding to include them in pg_stat_activity after all.
Michael Paquier and Robert Haas, reviewed by Alexander Korotkov and
Thomas Munro.
commit_ts and test_pg_dump were declaring targets before including the
PGXS stanza, which meant that the "all" target customarily defined as
the first (and therefore default target) was not the default anymore.
Fix that by moving those target definitions to after PGXS.
commit_ts was initially good, but I broke it in commit 9def031bd2;
test_pg_dump was born broken, probably copying from commit_ts' mistake.
In passing, fix a comment mistake in test_pg_dump/Makefile.
Backpatch to 9.6.
Noted by Tom Lane.
Previously, if a schema was created by an extension, a normal pg_dump run
(not --binary-upgrade) would summarily skip every object in that schema.
In a case where an extension creates a schema and then users create other
objects within that schema, this does the wrong thing: we want pg_dump
to skip the schema but still create the non-extension-owned objects.
There's no easy way to fix this pre-9.6, because in earlier versions the
"dump" status for a schema is just a bool and there's no way to distinguish
"dump me" from "dump my members". However, as of 9.6 we do have enough
state to represent that, so this is a simple correction of the logic in
selectDumpableNamespace.
In passing, make some cosmetic fixes in nearby code.
Martín Marqués, reviewed by Michael Paquier
Discussion: <99581032-71de-6466-c325-069861f1947d@2ndquadrant.com>
This coding pattern creates a race condition, because if an interesting
interrupt happens after we've checked InterruptPending but before we reset
our latch, the latch-setting done by the signal handler would get lost,
and then we might block at WaitLatch in the next iteration without ever
noticing the interrupt condition. You can put the CHECK_FOR_INTERRUPTS
before WaitLatch or after ResetLatch, but not between them.
Aside from fixing the bugs, add some explanatory comments to latch.h
to perhaps forestall the next person from making the same mistake.
In HEAD, also replace gather_readnext's direct call of
HandleParallelMessages with CHECK_FOR_INTERRUPTS. It does not seem clean
or useful for this one caller to bypass ProcessInterrupts and go straight
to HandleParallelMessages; not least because that fails to consider the
InterruptPending flag, resulting in useless work both here
(if InterruptPending isn't set) and in the next CHECK_FOR_INTERRUPTS call
(if it is).
This thinko seems to have been introduced in the initial coding of
storage/ipc/shm_mq.c (commit ec9037df2), and then blindly copied into all
the subsequent parallel-query support logic. Back-patch relevant hunks
to 9.4 to extirpate the error everywhere.
Discussion: <1661.1469996911@sss.pgh.pa.us>
With the refactoring of pg_dump to handle components, getOwnedSeqs needs
to be a bit more intelligent regarding which components to dump when.
Specifically, we can't simply use the owning table's components as the
set of components to dump as the table might only be including certain
components while all components of the sequence should be dumped, for
example, when the table is a member of an extension while the sequence
is not.
Handle this by combining the set of components to be dumped for the
sequence explicitly and those to be dumped for the table when setting
the components to be dumped for the sequence.
Also add a number of regression tests around this to, hopefully, catch
any future changes which break the expected behavior.
Discovered by: Philippe BEAUDOIN
Reviewed by: Michael Paquier
To ensure that "make installcheck" can be used safely against an existing
installation, we need to be careful about what global object names
(database, role, and tablespace names) we use; otherwise we might
accidentally clobber important objects. There's been a weak consensus that
test databases should have names including "regression", and that test role
names should start with "regress_", but we didn't have any particular rule
about tablespace names; and neither of the other rules was followed with
any consistency either.
This commit moves us a long way towards having a hard-and-fast rule that
regression test databases must have names including "regression", and that
test role and tablespace names must start with "regress_". It's not
completely there because I did not touch some test cases in rolenames.sql
that test creation of special role names like "session_user". That will
require some rethinking of exactly what we want to test, whereas the intent
of this patch is just to hit all the cases in which the needed renamings
are cosmetic.
There is no enforcement mechanism in this patch either, but if we don't
add one we can expect that the tests will soon be violating the convention
again. Again, that's not such a cosmetic change and it will require
discussion. (But I did use a quick-hack enforcement patch to find these
cases.)
Discussion: <16638.1468620817@sss.pgh.pa.us>
As of 9.6, pg_regress doesn't build unless storage/lwlocknames.h has been
created; but there was nothing forcing that to happen if you just went into
src/test/regress/ and built there. We previously had a similar complaint
about plpython.
To fix in a way that won't break next time we invent a generated header,
make src/backend/Makefile expose a phony target for updating all the
include files it builds, and invoke that before building pg_regress or
plpython. In principle, maybe we ought to invoke that everywhere; but
it would add a lot of usually-useless make cycles, so let's just do it
in the places where people have complained.
I made a couple of cosmetic adjustments in src/backend/Makefile as well,
to deal with the generated headers in consistent orders.
Michael Paquier and Tom Lane
Report: <31398.1467036827@sss.pgh.pa.us>
Report: <20150916200959.GB32090@msg.df7cb.de>
dumpAccessMethod() didn't get the memo that we now have a bitfield for
the components which should be dumped instead of a simple boolean.
Correct that by checking if the relevant bit is set for each component
being dumped out (and not dumping it out if it isn't set).
This corrects an issue where CREATE ACCESS METHOD commands were being
included in non-binary-upgrades when an extension included an access
method (as the bloom extensions does).
Also add a regression test to make sure that we only dump out the
ACCESS METHOD commands, when they are part of an extension, when doing
a binary upgrade.
Pointed out by Thom Brown.
Mostly these are just comments but there are a few in documentation
and a handful in code and tests. Hopefully this doesn't cause too much
unnecessary pain for backpatching. I relented from some of the most
common like "thru" for that reason. The rest don't seem numerous
enough to cause problems.
Thanks to Kevin Lyda's tool https://pypi.python.org/pypi/misspellings
All of the other tables used in the query in dumpTable(), which is
collecting column-level ACLs, are qualified, so we should be qualifying
the pg_init_privs, the related sub-select against pg_class and the
other queries added by the pg_dump catalog ACLs work.
Also, use ::regclass (or ::pg_catalog.regclass, where appropriate)
instead of using a poorly constructed query to get the OID for various
catalog tables.
Issues identified by Noah and Alvaro, patch by me.
The test_pg_dump extension doesn't have a C component, so we need
to exclude it from the MSVC build system trying to figure out how
to build it.
Also add a "MODULES" line to the Makefile, as test_extensions has.
Might not be necessary, but seems good to keep things consistent.
Lastly, remove the 'installcheck' line from test_pg_dump, as that
was causing redefinition errors, at least on my box. This also
makes test_pg_dump consistent with how commit_ts is set up.
The Makefile for test_pg_dump shouldn't have a MODULES_big line
because there's no actual compiled bit for that extension. Hopefully
this will fix the Windows buildfarm members which were complaining.
In passing, also add the 'prove_installcheck' bit to the pg_dump and
test_pg_dump Makefiles, to get the buildfarm members to actually run
those tests.
This TAP test suite will create a new cluster, populate it based on
the 'create_sql' values in the '%tests' hash, run all of the runs
defined in the '%pgdump_runs' hash, and then for each test in the
'%tests' hash, compare each run's output the the regular expression
defined for the test under the 'like' and 'unlike' functions, as
appropriate.
While this test suite covers a fair bit of ground (67% of pg_dump.c
and quite a bit of the other files in src/bin/pg_dump), there is
still quite a bit which remains to be added to provide better code
coverage. Still, this is quite a bit better than we had, and has
found a few bugs already (note that the CREATE TRANSFORM test is
commented out, as it is currently failing).
Idea for using the TAP system from Tom, though all of the code is mine.
This reverts commits f07d18b6e9, 82c83b3372, 3a3b309041, and
24c5f1a103.
This feature has shown enough immaturity that it was deemed better to
rip it out before rushing some more fixes at the last minute. There are
discussions on larger changes in this area for the next release.
For reasons of sheer brain fade, we (I) was calling systable_endscan()
immediately after systable_getnext() and expecting the tuple returned
by systable_getnext() to still be valid.
That's clearly wrong. Move the systable_endscan() down below the tuple
usage.
Discovered initially by Pavel Stehule and then also by Alvaro.
Add a regression test based on Alvaro's testing.
This feature is controlled by a new old_snapshot_threshold GUC. A
value of -1 disables the feature, and that is the default. The
value of 0 is just intended for testing. Above that it is the
number of minutes a snapshot can reach before pruning and vacuum
are allowed to remove dead tuples which the snapshot would
otherwise protect. The xmin associated with a transaction ID does
still protect dead tuples. A connection which is using an "old"
snapshot does not get an error unless it accesses a page modified
recently enough that it might not be able to produce accurate
results.
This is similar to the Oracle feature, and we use the same SQLSTATE
and error message for compatibility.
This introduces a new dependency type which marks an object as depending
on an extension, such that if the extension is dropped, the object
automatically goes away; and also, if the database is dumped, the object
is included in the dump output. Currently the grammar supports this for
indexes, triggers, materialized views and functions only, although the
utility code is generic so adding support for more object types is a
matter of touching the parser rules only.
Author: Abhijit Menon-Sen
Reviewed-by: Alexander Korotkov, Álvaro Herrera
Discussion: http://www.postgresql.org/message-id/20160115062649.GA5068@toroid.org
In the test_slot_timelines test module, we were abusing passing NULL
values which was received as zeroes in x86, but this breaks in ARM
(buildfarm member hamster) by crashing instead. Fix the breakage by
marking these functions as STRICT; the InvalidXid value that was
previously implicit in NULL values (on x86 at least) can now be passed
as 0. Failing to follow the fmgr protocol to check for NULLs beforehand
was causing ARM to fail, as evidenced by segmentation faults in
buildfarm member hamster.
In order to use the new functionality in the test script, use COALESCE
in the right spot to avoid forwarding NULL values.
This was diagnosed from the hamster crash by Craig Ringer, who also
proposed a different patch (checking for NULL values explicitely in the
C function code, and keeping the non-strictness in the C functions).
I decided to go with this approach instead.
When decoding from a logical slot, it's necessary for xlog reading to be
able to read xlog from historical (i.e. not current) timelines;
otherwise, decoding fails after failover, because the archives are in
the historical timeline. This is required to make "failover logical
slots" possible; it currently has no other use, although theoretically
it could be used by an extension that creates a slot on a standby and
continues to replay from the slot when the standby is promoted.
This commit includes a module in src/test/modules with functions to
manipulate the slots (which is not otherwise possible in SQL code) in
order to enable testing, and a new test in src/test/recovery to ensure
that the behavior is as expected.
Author: Craig Ringer
Reviewed-By: Oleksii Kliukin, Andres Freund, Petr Jelínek
This makes the psql() method much more capable: it captures both stdout
and stderr; it now returns the psql exit code rather than stdout; a
timeout can now be specified, as can ON_ERROR_STOP behavior; it gained a
new "on_error_die" (defaulting to off) parameter to raise an exception
if there's any problem. Finally, additional parameters to psql can be
passed if there's need for further tweaking.
For convenience, a new safe_psql() method retains much of the old
behavior of psql(), except that it uses on_error_die on, so that
problems like syntax errors in SQL commands can be detected more easily.
Many existing TAP test files now use safe_psql, which is what is really
wanted. A couple of ->psql() calls are now added in the commit_ts
tests, which verify that the right thing is happening on certain errors.
Some ->command_fails() calls in recovery tests that were verifying that
psql failed also became ->psql() calls now.
Author: Craig Ringer. Some tweaks by Álvaro Herrera
Reviewed-By: Michaël Paquier
These tests verify that 1) WAL replay preserves the stored value,
2) a streaming standby server replays the value obtained from the
master, and 3) the behavior is sensible in the face of repeated
configuration changes.
One annoyance is that tmp_check/ subdir from the TAP tests is clobbered
when the pg_regress test runs in the same subdirectory. This is
bothersome but not too terrible a problem, since the pg_regress test is
not run anyway if the TAP tests fail (unless "make -k" is used).
I had these tests around since commit 69e7235c93e2; add them now that we
have the recovery test framework in place.
On closer inspection, the reason copyright.pl was missing files is
that it is looking for 'Copyright (c)' and they had 'Copyright (C)'.
Fix that, and update a couple more that grepping for that revealed.
This flag has proven to be a recipe for bugs, and it doesn't seem like
it can really buy anything in terms of performance. So let's just
*always* set the process latch when we receive SIGUSR1 instead of
trying to do it only when needed.
Per my recent proposal on pgsql-hackers.
To allow users to force RLS to always be applied, even for table owners,
add ALTER TABLE .. FORCE ROW LEVEL SECURITY.
row_security=off overrides FORCE ROW LEVEL SECURITY, to ensure pg_dump
output is complete (by default).
Also add SECURITY_NOFORCE_RLS context to avoid data corruption when
ALTER TABLE .. FORCE ROW SECURITY is being used. The
SECURITY_NOFORCE_RLS security context is used only during referential
integrity checks and is only considered in check_enable_rls() after we
have already checked that the current user is the owner of the relation
(which should always be the case during referential integrity checks).
Back-patch to 9.5 where RLS was added.
Without CASCADE, if an extension has an unfullfilled dependency on
another extension, CREATE EXTENSION ERRORs out with "required extension
... is not installed". That is annoying, especially when that dependency
is an implementation detail of the extension, rather than something the
extension's user can make sense of.
In addition to CASCADE this also includes a small set of regression
tests around CREATE EXTENSION.
Author: Petr Jelinek, editorialized by Michael Paquier, Andres Freund
Reviewed-By: Michael Paquier, Andres Freund, Jeff Janes
Discussion: 557E0520.3040800@2ndquadrant.com
This refactors rewrite/rowsecurity.c to simplify the handling of the
default deny case (reducing the number of places where we check for and
add the default deny policy from three to one) by splitting up the
retrival of the policies from the application of them.
This also allowed us to do away with the policy_id field. A policy_name
field was added for WithCheckOption policies and is used in error
reporting, when available.
Patch by Dean Rasheed, with various mostly cosmetic changes by me.
Back-patch to 9.5 where RLS was introduced to avoid unnecessary
differences, since we're still in alpha, per discussion with Robert.
This time, instead of using a core isolation test, put it on its own
test module; this way it can require the pageinspect module to be
present before running.
The module's Makefile is loosely modeled after test_decoding's, so that
it's easy to add further tests for either pg_regress or isolationtester
later.
Backpatch to 9.5.
Only remove the default deny policy when a permissive policy exists
(either from the hook or defined by the user). If only restrictive
policies exist then no rows will be visible, as restrictive policies
shouldn't make rows visible. To address this requirement, a single
"USING (true)" permissive policy can be created.
Update the test_rls_hooks regression tests to create the necessary
"USING (true)" permissive policy.
Back-patch to 9.5 where RLS was added.
Per discussion with Dean.
Policy USING and WITH CHECK expressions were using EXPR_KIND_WHERE for
parse analysis, which results in inappropriate ERROR messages when
the expression contains unsupported constructs such as aggregates.
Create a new ParseExprKind called EXPR_KIND_POLICY and tailor the
related messages to fit.
Reported by Noah Misch. Reviewed by Dean Rasheed, Alvaro Herrera,
and Robert Haas. Back-patch to 9.5 where RLS was introduced.
dbf2ec1a changed make check so that the installation logs get directed
to stdout and stderr. Per discussion on -hackers, this patch restores
saving it to a file. It is now saved in /tmp_install/log, which is
created once per invocation of any make target doing regression tests.
Along the way, add a missing /log/ entry to test_ddl_deparse's
.gitignore.
Michael Paquier.
In the passing, also move AT_ReAddComment to more logical position in the
enum, after all the Constraint-related subcommands.
This fixes a compiler warning, added by commit e42375fc. Backpatch to 9.5,
like that patch.
Commit b488c580ae, which added the DDL command collection feature,
neglected to update the code that commit cac7658205 had previously
added two weeks earlier for the TRANSFORM feature.
Reported by Michael Paquier.
This feature lets user code inspect and take action on DDL events.
Whenever a ddl_command_end event trigger is installed, DDL actions
executed are saved to a list which can be inspected during execution of
a function attached to ddl_command_end.
The set-returning function pg_event_trigger_ddl_commands can be used to
list actions so captured; it returns data about the type of command
executed, as well as the affected object. This is sufficient for many
uses of this feature. For the cases where it is not, we also provide a
"command" column of a new pseudo-type pg_ddl_command, which is a
pointer to a C structure that can be accessed by C code. The struct
contains all the info necessary to completely inspect and even
reconstruct the executed command.
There is no actual deparse code here; that's expected to come later.
What we have is enough infrastructure that the deparsing can be done in
an external extension. The intention is that we will add some deparsing
code in a later release, as an in-core extension.
A new test module is included. It's probably insufficient as is, but it
should be sufficient as a starting point for a more complete and
future-proof approach.
Authors: Álvaro Herrera, with some help from Andres Freund, Ian Barwick,
Abhijit Menon-Sen.
Reviews by Andres Freund, Robert Haas, Amit Kapila, Michael Paquier,
Craig Ringer, David Steele.
Additional input from Chris Browne, Dimitri Fontaine, Stephen Frost,
Petr Jelínek, Tom Lane, Jim Nasby, Steven Singer, Pavel Stěhule.
Based on original work by Dimitri Fontaine, though I didn't use his
code.
Discussion:
https://www.postgresql.org/message-id/m2txrsdzxa.fsf@2ndQuadrant.frhttps://www.postgresql.org/message-id/20131108153322.GU5809@eldon.alvh.no-ip.orghttps://www.postgresql.org/message-id/20150215044814.GL3391@alvh.no-ip.org
The original security barrier view implementation, on which RLS is
built, prevented all non-leakproof functions from being pushed down to
below the view, even when the function was not receiving any data from
the view. This optimization improves on that situation by, instead of
checking strictly for non-leakproof functions, it checks for Vars being
passed to non-leakproof functions and allows functions which do not
accept arguments or whose arguments are not from the current query level
(eg: constants can be particularly useful) to be pushed down.
As discussed, this does mean that a function which is pushed down might
gain some idea that there are rows meeting a certain criteria based on
the number of times the function is called, but this isn't a
particularly new issue and the documentation in rules.sgml already
addressed similar covert-channel risks. That documentation is updated
to reflect that non-leakproof functions may be pushed down now, if
they meet the above-described criteria.
Author: Dean Rasheed, with a bit of rework to make things clearer,
along with comment and documentation updates from me.
The RLS capability is built on top of the WITH CHECK OPTION
system which was added for auto-updatable views, however, unlike
WCOs on views (which are mandated by the SQL spec to not fire until
after all other constraints and checks are done), it makes much more
sense for RLS checks to happen earlier than constraint and uniqueness
checks.
This patch reworks the structure which holds the WCOs a bit to be
explicitly either VIEW or RLS checks and the RLS-related checks are
done prior to the constraint and uniqueness checks. This also allows
better error reporting as we are now reporting when a violation is due
to a WITH CHECK OPTION and when it's due to an RLS policy violation,
which was independently noted by Craig Ringer as being confusing.
The documentation is also updated to include a paragraph about when RLS
WITH CHECK handling is performed, as there have been a number of
questions regarding that and the documentation was previously silent on
the matter.
Author: Dean Rasheed, with some kabitzing and comment changes by me.
As pointed out by the buildfarm, test_rls_hooks wasn't functioning
properly with a clean installcheck. test_rls_hooks needs to explicitly
load the library with the hooks in it, to allow installcheck to work;
using the --temp-config doesn't help since that isn't used when running
installcheck and it isn't exactly fair to the buildfarm to modify the
installed config prior to calling installcheck.
Also, have test_rls_hooks clean up after itself.
In prepend_row_security_policies(), defaultDeny was always true, so if
there were any hook policies, the RLS policies on the table would just
get discarded. Fixed to start off with defaultDeny as false and then
properly set later if we detect that only the default deny policy exists
for the internal policies.
The infinite recursion detection in fireRIRrules() didn't properly
manage the activeRIRs list in the case of WCOs, so it would incorrectly
report infinite recusion if the same relation with RLS appeared more
than once in the rtable, for example "UPDATE t ... FROM t ...".
Further, the RLS expansion code in fireRIRrules() was handling RLS in
the main loop through the rtable, which lead to RTEs being visited twice
if they contained sublink subqueries, which
prepend_row_security_policies() attempted to handle by exiting early if
the RTE already had securityQuals. That doesn't work, however, since
if the query involved a security barrier view on top of a table with
RLS, the RTE would already have securityQuals (from the view) by the
time fireRIRrules() was invoked, and so the table's RLS policies would
be ignored. This is fixed in fireRIRrules() by handling RLS in a
separate loop at the end, after dealing with any other sublink
subqueries, thus ensuring that each RTE is only visited once for RLS
expansion.
The inheritance planner code didn't correctly handle non-target
relations with RLS, which would get turned into subqueries during
planning. Thus an update of the form "UPDATE t1 ... FROM t2 ..." where
t1 has inheritance and t2 has RLS quals would fail. Fix by making sure
to copy in and update the securityQuals when they exist for non-target
relations.
process_policies() was adding WCOs to non-target relations, which is
unnecessary, and could lead to a lot of wasted time in the rewriter and
the planner. Fix by only adding WCO policies when working on the result
relation. Also in process_policies, we should be copying the USING
policies to the WITH CHECK policies on a per-policy basis, fix by moving
the copying up into the per-policy loop.
Lastly, as noted by Dean, we were simply adding policies returned by the
hook provided to the list of quals being AND'd, meaning that they would
actually restrict records returned and there was no option to have
internal policies and hook-based policies work together permissively (as
all internal policies currently work). Instead, explicitly add support
for both permissive and restrictive policies by having a hook for each
and combining the results appropriately. To ensure this is all done
correctly, add a new test module (test_rls_hooks) to test the various
combinations of internal, permissive, and restrictive hook policies.
Largely from Dean Rasheed (thanks!):
CAEZATCVmFUfUOwwhnBTcgi6AquyjQ0-1fyKd0T3xBWJvn+xsFA@mail.gmail.com
Author: Dean Rasheed, though I added the new hooks and test module.
This improves on commit bbfd7edae5 by
making two simple changes:
* pg_attribute_noreturn now takes parentheses, ie pg_attribute_noreturn().
Likewise pg_attribute_unused(), pg_attribute_packed(). This reduces
pgindent's tendency to misformat declarations involving them.
* attributes are now always attached to function declarations, not
definitions. Previously some places were taking creative shortcuts,
which were not merely candidates for bad misformatting by pgindent
but often were outright wrong anyway. (It does little good to put a
noreturn annotation where callers can't see it.) In any case, if
we would like to believe that these macros can be used with non-gcc
compilers, we should avoid gratuitous variance in usage patterns.
I also went through and manually improved the formatting of a lot of
declarations, and got rid of excessively repetitive (and now obsolete
anyway) comments informing the reader what pg_attribute_printf is for.
Right now, there's only one flag, DSM_CREATE_NULL_IF_MAXSEGMENTS,
which suppresses the error that would normally be thrown when the
maximum number of segments already exists, instead returning NULL.
It might be useful to add more flags in the future, such as one to
ignore allocation errors, but I haven't done that here.
Until now __attribute__() was defined to be empty for all compilers but
gcc. That's problematic because it prevents using it in other compilers;
which is necessary e.g. for atomics portability. It's also just
generally dubious to do so in a header as widely included as c.h.
Instead add pg_attribute_format_arg, pg_attribute_printf,
pg_attribute_noreturn macros which are implemented in the compilers that
understand them. Also add pg_attribute_noreturn and pg_attribute_packed,
but don't provide fallbacks, since they can affect functionality.
This means that external code that, possibly unwittingly, relied on
__attribute__ defined to be empty on !gcc compilers may now run into
warnings or errors on those compilers. But there shouldn't be many
occurances of that and it's hard to work around...
Discussion: 54B58BA3.8040302@ohmu.fi
Author: Oskari Saarenmaa, with some minor changes by me.
To do so, move InitializeLatchSupport() into the new common process
initialization functions, and add a new global variable MyLatch.
MyLatch is usable as soon InitPostmasterChild() has been called
(i.e. very early during startup). Initially it points to a process
local latch that exists in all processes. InitProcess/InitAuxiliaryProcess
then replaces that local latch with PGPROC->procLatch. During shutdown
the reverse happens.
This is primarily advantageous for two reasons: For one it simplifies
dealing with the shared process latch, especially in signal handlers,
because instead of having to check for MyProc, MyLatch can be used
unconditionally. For another, a later patch that makes FEs/BE
communication use latches, now can rely on the existence of a latch,
even before having gone through InitProcess.
Discussion: 20140927191243.GD5423@alap3.anarazel.de
Transactions can now set their commit timestamp directly as they commit,
or an external transaction commit timestamp can be fed from an outside
system using the new function TransactionTreeSetCommitTsData(). This
data is crash-safe, and truncated at Xid freeze point, same as pg_clog.
This module is disabled by default because it causes a performance hit,
but can be enabled in postgresql.conf requiring only a server restart.
A new test in src/test/modules is included.
Catalog version bumped due to the new subdirectory within PGDATA and a
couple of new SQL functions.
Authors: Álvaro Herrera and Petr Jelínek
Reviewed to varying degrees by Michael Paquier, Andres Freund, Robert
Haas, Amit Kapila, Fujii Masao, Jaime Casanova, Simon Riggs, Steven
Singer, Peter Eisentraut
check-world failed in a completely clean tree, because src/test/modules
fail to build unless errcodes.h is generated first. To fix this,
install a dependency in src/test/modules' Makefile so that the necessary
file is generated. Even with this, running "make check" within
individual module subdirs will still fail because the dependency is not
considered there, but this case is less interesting and would be messier
to fix.
check-world still failed with the above fix in place, this time because
dummy_seclabel used LOAD to load the dynamic library, which doesn't work
because the @libdir@ (expanded by the makefile) is expanded to the final
install path, not the temporary installation directory used by make
check. To fix, tweak things so that CREATE EXTENSION can be used
instead, which solves the problem because the library path is expanded
by the backend, which is aware of the true libdir.
Rather than have the core security_label regression test depend on the
dummy_seclabel module, have that part of the test be executed by
dummy_seclabel itself directly. This simplifies the testing rig a bit;
in particular it should silence the problems from the MSVC buildfarm
phylum, which haven't yet gotten taught how to install src/test/modules.
This is advance preparation for introducing even more test modules; the
easy solution is to add them to contrib, but that's bloated enough that
it seems a good time to think of something different.
Moved modules are dummy_seclabel, test_shm_mq, test_parser and
worker_spi.
(test_decoding was also a candidate, but there was too much opposition
to moving that one. We can always reconsider later.)
Peter Eisentraut
Amit Kapila
Andres Freund
Michael Paquier
Alvaro Herrera
Tom Lane
Heikki Linnakangas
Bruce Momjian
Thomas Munro
Andrew Dunstan
Peter Eisentraut
Magnus Hagander
Stephen Frost
Noah Misch
Robert Haas
Greg Stark
Kevin Grittner
Joe Conway