If the table attached as a partition is itself partitioned, individual
partitions might have constraints strong enough to skip scanning the
table even if the table actually attached does not. This is pretty
cheap to check, and possibly a big win if it works out.
Amit Langote, with test case changes by me.
Discussion: http://postgr.es/m/1f08b844-0078-aa8d-452e-7af3bf77d05f@lab.ntt.co.jp
Index columns are referenced by ordinal number rather than name, e.g.
CREATE INDEX coord_idx ON measured (x, y, (z + t));
ALTER INDEX coord_idx ALTER COLUMN 3 SET STATISTICS 1000;
Incompatibility note for release notes:
\d+ for indexes now also displays Stats Target
Authors: Alexander Korotkov, with contribution by Adrien NAYRAT
Review: Adrien NAYRAT, Simon Riggs
Wordsmith: Simon Riggs
If you do ALTER COLUMN SET NOT NULL against an inheritance parent table,
it will recurse to mark all the child columns as NOT NULL as well. This
is necessary for consistency: if the column is labeled NOT NULL then
reading it should never produce nulls.
However, that didn't happen in the case where ALTER ... ADD PRIMARY KEY
marks a target column NOT NULL that wasn't before. That was questionable
from the beginning, and now Tushar Ahuja points out that it can lead to
dump/restore failures in some cases. So let's make that case recurse too.
Although this is meant to fix a bug, it's enough of a behavioral change
that I'm pretty hesitant to back-patch, especially in view of the lack
of similar field complaints. It doesn't seem to be too late to put it
into v10 though.
Michael Paquier, editorialized on slightly by me
Discussion: https://postgr.es/m/b8794d6a-38f0-9d7c-ad4b-e85adf860fc9@enterprisedb.com
In a CHECK clause, a null result means true, whereas in a WHERE clause
it means false. predtest.c provided different functions depending on
which set of semantics applied to the predicate being proved, but had
no option to control what a null meant in the clauses provided as
axioms. Add one.
Use that in the partitioning code when figuring out whether the
validation scan on a new partition can be skipped. Rip out the
old logic that attempted (not very successfully) to compensate
for the absence of the necessary support in predtest.c.
Ashutosh Bapat and Robert Haas, reviewed by Amit Langote and
incorporating feedback from Tom Lane.
Discussion: http://postgr.es/m/CAFjFpReT_kq_uwU_B8aWDxR7jNGE=P0iELycdq5oupi=xSQTOw@mail.gmail.com
Commit 9aa3c782c added code to allow CREATE TABLE/CREATE TYPE to not fail
when the desired type name conflicts with an autogenerated array type, by
dint of renaming the array type out of the way. But I (tgl) overlooked
that the same case arises in ALTER TABLE/TYPE RENAME. Fix that too.
Back-patch to all supported branches.
Report and patch by Vik Fearing, modified a bit by me
Discussion: https://postgr.es/m/0f4ade49-4f0b-a9a3-c120-7589f01d1eb8@2ndquadrant.com
This seemed like a good idea originally because there's no way to mark
a range partition as accepting NULL, but that now seems more like a
current limitation than something we want to lock down for all time.
For example, there's a proposal to add the notion of a default
partition which accepts all rows not otherwise routed, which directly
conflicts with the idea that a range-partitioned table should never
allow nulls anywhere. So let's change this while we still can, by
putting the NOT NULL test into the partition constraint instead of
changing the column properties.
Amit Langote and Robert Haas, reviewed by Amit Kapila
Discussion: http://postgr.es/m/8e2dd63d-c6fb-bb74-3c2b-ed6d63629c9d@lab.ntt.co.jp
The CommentStmt made by RebuildConstraintComment() has to pstrdup the
relation name, else it will contain a dangling pointer after that
relcache entry is flushed. (I'm less sure that pstrdup'ing conname
is necessary, but let's be safe.) Failure to do this leads to weird
errors or crashes, as reported by Marko Elezovic.
Bug introduced by commit e42375fc8, so back-patch to 9.5 as that was.
Fix by David Rowley, regression test by Michael Paquier
Discussion: https://postgr.es/m/DB6PR03MB30775D58E732D4EB0C13725B9AE00@DB6PR03MB3077.eurprd03.prod.outlook.com
Currently, trying to validate a NO INHERIT constraint on the parent will
search for the constraint in child tables (where it is not supposed to
exist), wrongly causing a "constraint does not exist" error.
Amit Langote, per a report from Hans Buschmann.
Discussion: http://postgr.es/m/20170421184012.24362.19@wrigleys.postgresql.org
There is no need to forbid ALTER TABLE ONLY on partitioned tables,
when no partitions exist yet. This can be handy for users who are
building up their partitioned table independently and will create actual
partitions later.
In addition, this is how pg_dump likes to operate in certain instances.
Author: Amit Langote, with some error message word-smithing by me
validateCheckConstraint() shouldn't try to access the storage for
a partitioned table, because it no longer has any. Creating a
_RETURN table on a partitioned table shouldn't be allowed, both
because there's no value in it and because trying to do so would
involve a validation scan against its nonexistent storage.
Amit Langote, reviewed by Tom Lane. Regression test outputs
updated to pass by me.
Discussion: http://postgr.es/m/e5c3cbd3-1551-d6f8-c9e2-51777d632fd2@lab.ntt.co.jp
Record partitioned table dependencies as DEPENDENCY_AUTO
rather than DEPENDENCY_NORMAL, so that DROP TABLE just works.
Remove all the tests for partitioned tables where earlier
work had deliberately avoided using CASCADE.
Amit Langote, reviewed by Ashutosh Bapat and myself
Creating global objects named "foo" isn't an especially wise thing,
but especially not in a test script that has already used that name
for something else, and most especially not in a script that runs
in parallel with other scripts that use that name :-(
Per buildfarm.
Commit 0563a3a8b just introduced another instance of the same unsafe
testing methodology that appeared in 2ac3ef7a0, which I corrected in
257d81572. Robert/Amit, please stop doing that.
Also look through the rest of f0e44751d's test cases, and correct some
other queries with underdetermined ordering of results from the system
catalogs. These haven't failed in the buildfarm yet, but I don't
have any confidence in that staying true.
Per multiple buildfarm members.
Move the code for doing parent attnos to child attnos mapping for Vars
in partition constraint expressions to a separate function
map_partition_varattnos() and call it from the appropriate places.
Doing it in get_qual_from_partbound(), as is now, would produce wrong
result in certain multi-level partitioning cases, because it only
considers the current pair of parent-child relations. In certain
multi-level partitioning cases, attnums for the same key attribute(s)
might differ between various levels causing the same attribute to be
numbered differently in different instances of the Var corresponding
to a given attribute.
With this commit, in generate_partition_qual(), we first generate the
the whole partition constraint (considering all levels of partitioning)
and then do the mapping, so that Vars in the final expression are
numbered according the leaf relation (to which it is supposed to apply).
Amit Langote, reviewed by me.
If inherited tables don't have exactly the same schema, the USING clause
in an ALTER TABLE / SET DATA TYPE misbehaves when applied to the
children tables since commit 9550e8348b. Starting with that commit,
the attribute numbers in the USING expression are fixed during parse
analysis. This can lead to bogus errors being reported during
execution, such as:
ERROR: attribute 2 has wrong type
DETAIL: Table has type smallint, but query expects integer.
Since it wouldn't do to revert to the original coding, we now apply a
transformation to map the attribute numbers to the correct ones for each
child.
Reported by Justin Pryzby
Analysis by Tom Lane; patch by me.
Discussion: https://postgr.es/m/20170102225618.GA10071@telsasoft.com
It's not entirely clear that we should log a message here at all, but
it's certainly wrong to use elog() for a message that should clearly
be translatable.
Amit Langote
Table partitioning is like table inheritance and reuses much of the
existing infrastructure, but there are some important differences.
The parent is called a partitioned table and is always empty; it may
not have indexes or non-inherited constraints, since those make no
sense for a relation with no data of its own. The children are called
partitions and contain all of the actual data. Each partition has an
implicit partitioning constraint. Multiple inheritance is not
allowed, and partitioning and inheritance can't be mixed. Partitions
can't have extra columns and may not allow nulls unless the parent
does. Tuples inserted into the parent are automatically routed to the
correct partition, so tuple-routing ON INSERT triggers are not needed.
Tuple routing isn't yet supported for partitions which are foreign
tables, and it doesn't handle updates that cross partition boundaries.
Currently, tables can be range-partitioned or list-partitioned. List
partitioning is limited to a single column, but range partitioning can
involve multiple columns. A partitioning "column" can be an
expression.
Because table partitioning is less general than table inheritance, it
is hoped that it will be easier to reason about properties of
partitions, and therefore that this will serve as a better foundation
for a variety of possible optimizations, including query planner
optimizations. The tuple routing based which this patch does based on
the implicit partitioning constraints is an example of this, but it
seems likely that many other useful optimizations are also possible.
Amit Langote, reviewed and tested by Robert Haas, Ashutosh Bapat,
Amit Kapila, Rajkumar Raghuwanshi, Corey Huinker, Jaime Casanova,
Rushabh Lathia, Erik Rijkers, among others. Minor revisions by me.
The code to change the deferrability properties of a foreign-key constraint
updated all the associated triggers to match; but a moment's examination of
the code that creates those triggers in the first place shows that only
some of them should track the constraint's deferrability properties. This
leads to odd failures in subsequent exercise of the foreign key, as the
triggers are fired at the wrong times. Fix that, and add a regression test
comparing the trigger properties produced by ALTER CONSTRAINT with those
you get by creating the constraint as-intended to begin with.
Per report from James Parks. Back-patch to 9.4 where this ALTER
functionality was introduced.
Report: <CAJ3Xv+jzJ8iNNUcp4RKW8b6Qp1xVAxHwSXVpjBNygjKxcVuE9w@mail.gmail.com>
MergeAttributes() rejects cases where columns to be merged have the same
type but different typmod, which is correct; but the error message it
printed didn't show either typmod, which is unhelpful. Changing this
requires using format_type_with_typemod() in place of TypeNameToString(),
which will have some minor side effects on the way some type names are
printed, but on balance this is an improvement: the old code sometimes
printed one type according to one set of rules and the other type according
to the other set, which could be confusing in its own way.
Oddly, there were no regression test cases covering any of this behavior,
so add some.
Complaint and fix by Amit Langote
FOREIGN KEY constraints have behaved this way for a long time, but for
some reason the behavior of CHECK constraints has been inconsistent up
until now.
Amit Langote and Amul Sul, with assorted tweaks by me.
The previous way of reconstructing check constraints was to do a separate
"ALTER TABLE ONLY tab ADD CONSTRAINT" for each table in an inheritance
hierarchy. However, that way has no hope of reconstructing the check
constraints' own inheritance properties correctly, as pointed out in
bug #13779 from Jan Dirk Zijlstra. What we should do instead is to do
a regular "ALTER TABLE", allowing recursion, at the topmost table that
has a particular constraint, and then suppress the work queue entries
for inherited instances of the constraint.
Annoyingly, we'd tried to fix this behavior before, in commit 5ed6546cf,
but we failed to notice that it wasn't reconstructing the pg_constraint
field values correctly.
As long as I'm touching pg_get_constraintdef_worker anyway, tweak it to
always schema-qualify the target table name; this seems like useful backup
to the protections installed by commit 5f173040.
In HEAD/9.5, get rid of get_constraint_relation_oids, which is now unused.
(I could alternatively have modified it to also return conislocal, but that
seemed like a pretty single-purpose API, so let's not pretend it has some
other use.) It's unused in the back branches as well, but I left it in
place just in case some third-party code has decided to use it.
In HEAD/9.5, also rename pg_get_constraintdef_string to
pg_get_constraintdef_command, as the previous name did nothing to explain
what that entry point did differently from others (and its comment was
equally useless). Again, that change doesn't seem like material for
back-patching.
I did a bit of re-pgindenting in tablecmds.c in HEAD/9.5, as well.
Otherwise, back-patch to all supported branches.
This was already true for CREATE EXTENSION, but historically has not
been true for other object types. Therefore, this is a backward
incompatibility. Per discussion on pgsql-hackers, everyone seems to
agree that the new behavior is better.
Marti Raudsepp, reviewed by Haribabu Kommi and myself
This case seems to have been overlooked when unvalidated check constraints
were introduced, in 9.2. The code would attempt to dump such constraints
over again for each child table, even though adding them to the parent
table is sufficient.
In 9.2 and 9.3, also fix contrib/pg_upgrade/Makefile so that the "make
clean" target fully cleans up after a failed test. This evidently got
dealt with at some point in 9.4, but it wasn't back-patched. I ran into
it while testing this fix ...
Per bug #13656 from Ingmar Brouns.
Reduce lock levels down to ShareUpdateExclusiveLock for all autovacuum-related
relation options when setting them using ALTER TABLE.
Add infrastructure to allow varying lock levels for relation options in later
patches. Setting multiple options together uses the highest lock level required
for any option. Works for both main and toast tables.
Fabrízio Mello, reviewed by Michael Paquier, mild edit and additional regression
tests from myself
Commit e5550d5fec added some new
tests for ALTER TABLE which involved table scans. When
default_transaction_isolation = 'serializable' these acquire
relation-level SIReadLocks. The test results didn't cope with
that. Add SIReadLock as the minimum lock level for purposes of
these tests.
This could also be fixed by excluding this type of lock from the
my_locks view, but it would be a bug for SIReadLock to show up for
a relation which was not otherwise locked, so do it this way to
allow that sort of condition to cause a regression test failure.
There is some question whether we could avoid taking SIReadLocks
during these operations, but confirming the safety of that and
figuring out how to avoid the locks is not trivial, and would be
a separate patch.
Backpatch to 9.4 where the new tests were added.
In the test query I added for ALTER TABLE retaining comments, the order of
the result rows was not stable, and varied across systems. Add an ORDER BY
to make the order predictable. This should fix the buildfarm failures.
When a column's datatype is changed, ATExecAlterColumnType() rebuilds all
the affected indexes and constraints, and the comments from the old
indexes/constraints were not carried over.
To fix, create a synthetic COMMENT ON command in the work queue, to re-add
any comments on constraints. For indexes, there's a comment field in
IndexStmt that is used.
This fixes bug #13126, reported by Kirill Simonov. Original patch by
Michael Paquier, reviewed by Petr Jelinek and me. This bug is present in
all versions, but only backpatch to 9.5. Given how minor the issue is, it
doesn't seem worth the work and risk to backpatch further than that.
We already tried to improve this once, but the "improved" text was rather
off-target if you had provided a USING clause. Also, it seems helpful
to provide the exact text of a suggested USING clause, so users can just
copy-and-paste it when needed. Per complaint from Keith Rarick and a
suggestion from Merlin Moncure.
Back-patch to 9.2 where the current wording was adopted.
Reduce lock levels to ShareRowExclusive for the following SQL
CREATE TRIGGER (but not DROP or ALTER)
ALTER TABLE ENABLE TRIGGER
ALTER TABLE DISABLE TRIGGER
ALTER TABLE … ADD CONSTRAINT FOREIGN KEY
Original work by Simon Riggs, extracted and refreshed by Andreas Karlsson
New test cases added by Andreas Karlsson
Reviewed by Noah Misch, Andres Freund, Michael Paquier and Simon Riggs
Error messages informing the user that no such column exists can
sometimes provoke a perplexed response. This often happens due to
a subtle typo in the column name or, perhaps less likely, in the
alias name. To speed discovery of what the real issue is in such
cases, we'll now search the range table for approximate matches.
If there are one or two such matches that are good enough to think
that they might be what the user intended to type, and better than
all other approximate matches, we'll issue a hint suggesting that
the user might have intended to reference those columns.
Peter Geoghegan and Robert Haas
VACUUM and ANALYZE update the target table's pg_class row in-place, that is
nontransactionally. This is OK, more or less, for the statistical columns,
which are mostly nontransactional anyhow. It's not so OK for the DDL hint
flags (relhasindex etc), which might get changed in response to
transactional changes that could still be rolled back. This isn't a
problem for VACUUM, since it can't be run inside a transaction block nor
in parallel with DDL on the table. However, we allow ANALYZE inside a
transaction block, so if the transaction had earlier removed the last
index, rule, or trigger from the table, and then we roll back the
transaction after ANALYZE, the table would be left in a corrupted state
with the hint flags not set though they should be.
To fix, suppress the hint-flag updates if we are InTransactionBlock().
This is safe enough because it's always OK to postpone hint maintenance
some more; the worst-case consequence is a few extra searches of pg_index
et al. There was discussion of instead using a transactional update,
but that would change the behavior in ways that are not all desirable:
in most scenarios we're better off keeping ANALYZE's statistical values
even if the ANALYZE itself rolls back. In any case we probably don't want
to change this behavior in back branches.
Per bug #11638 from Casey Shobe. This has been broken for a good long
time, so back-patch to all supported branches.
Tom Lane and Michael Paquier, initial diagnosis by Andres Freund
This reverts commit e23014f3d4.
As the side effect of the reverted commit, when the unit is
specified, the reloption was stored in the catalog with the unit.
This broke pg_dump (specifically, it prevented pg_dump from
outputting restorable backup regarding the reloption) and
turned the buildfarm red. Revert the commit until the fixed
version is ready.
This introduces an infrastructure which allows us to specify the units
like ms (milliseconds) in integer relation option, like GUC parameter.
Currently only autovacuum_vacuum_cost_delay reloption can accept
the units.
Reviewed by Michael Paquier
This enables changing permanent (logged) tables to unlogged and
vice-versa.
(Docs for ALTER TABLE / SET TABLESPACE got shuffled in an order that
hopefully makes more sense than the original.)
Author: Fabrízio de Royes Mello
Reviewed by: Christoph Berg, Andres Freund, Thom Brown
Some tweaking by Álvaro Herrera
VALIDATE CONSTRAINT
CLUSTER ON
SET WITHOUT CLUSTER
ALTER COLUMN SET STATISTICS
ALTER COLUMN SET ()
ALTER COLUMN RESET ()
All other sub-commands use AccessExclusiveLock
Simon Riggs and Noah Misch
Reviews by Robert Haas and Andres Freund
Make the COPY test, which loads most of the large static tables used in
the tests, also explicitly ANALYZE those tables. This allows us to get
rid of various ad-hoc, and rather redundant, ANALYZE commands that had
gotten stuck into various test scripts over time to ensure we got
consistent plan choices. (We could have done a database-wide ANALYZE,
but that would cause stats to get attached to the small static tables
too, which results in plan changes compared to the historical behavior.
I'm not sure that's a good idea, so not going that far for now.)
Back-patch to 9.0, since 9.0 and 9.1 are currently sometimes failing
regression tests for lack of an "ANALYZE tenk1" in the subselect test.
There's no need for this in 8.4 since we didn't print any plans back
then.
Although user-defined relations can't be directly created in
pg_catalog, it's possible for them to end up there, because you can
create them in some other schema and then use ALTER TABLE .. SET SCHEMA
to move them there. Previously, such relations couldn't afterwards
be manipulated, because IsSystemRelation()/IsSystemClass() rejected
all attempts to modify objects in the pg_catalog schema, regardless
of their origin. With this patch, they now reject only those
objects in pg_catalog which were created at initdb-time, allowing
most operations on user-created tables in pg_catalog to proceed
normally.
This patch also adds new functions IsCatalogRelation() and
IsCatalogClass(), which is similar to IsSystemRelation() and
IsSystemClass() but with a slightly narrower definition: only TOAST
tables of system catalogs are included, rather than *all* TOAST tables.
This is currently used only for making decisions about when
invalidation messages need to be sent, but upcoming logical decoding
patches will find other uses for this information.
Andres Freund, with some modifications by me.
ExecBuildSlotValueDescription() printed "null" for each dropped column in
a row being complained of by ExecConstraints(). This has some sanity in
terms of the underlying implementation, but is of course pretty surprising
to users. To fix, we must pass the target relation's descriptor to
ExecBuildSlotValueDescription(), because the slot descriptor it had been
using doesn't get labeled with attisdropped markers.
Per bug #8408 from Maxim Boguk. Back-patch to 9.2 where the feature of
printing row values in NOT NULL and CHECK constraint violation messages
was introduced.
Michael Paquier and Tom Lane
Future patches are expected to introduce logical replication that
works by decoding WAL. WAL contains relfilenodes rather than relation
OIDs, so this infrastructure will be needed to find the relation OID
based on WAL contents.
If logical replication does not make it into this release, we probably
should consider reverting this, since it will add some overhead to DDL
operations that create new relations. One additional index insert per
pg_class row is not a large overhead, but it's more than zero.
Another way of meeting the needs of logical replication would be to
the relation OID to WAL, but that would burden DML operations, not
only DDL.
Andres Freund, with some changes by me. Design review, in earlier
versions, by Álvaro Herrera.
The planner sometimes inserts Result nodes to perform column projections
(ie, arbitrary scalar calculations) above plan nodes that lack projection
logic of their own. However, we did that even if the lower plan node was
in fact producing the required column set already; which is a pretty common
case given the popularity of "SELECT * FROM ...". Measurements show that
the useless plan node adds non-negligible overhead, especially when there
are many columns in the result. So add a check to avoid inserting a Result
node unless there's something useful for it to do.
There are a couple of remaining places where unnecessary Result nodes
could get inserted, but they are (a) much less performance-critical,
and (b) coded in such a way that it's hard to avoid inserting a Result,
because the desired tlist is changed on-the-fly in subsequent logic.
We'll leave those alone for now.
Kyotaro Horiguchi; reviewed and further hacked on by Amit Kapila and
Tom Lane.
This case got broken in 8.4 by the addition of an error check that
complains if ALTER TABLE ONLY is used on a table that has children.
We do use ONLY for this situation, but it's okay because the necessary
recursion occurs at a higher level. So we need to have a separate
flag to suppress recursion without making the error check.
Reported and patched by Pavan Deolasee, with some editorial adjustments by
me. Back-patch to 8.4, since this is a regression of functionality that
worked in earlier branches.
The previous scheme had bugs in some corner cases involving tables that had
been renamed since a view was made. This could result in dumped views that
failed to reload or reloaded incorrectly, as seen in bug #7553 from Lloyd
Albin, as well as in some pgsql-hackers discussion back in January. Also,
its behavior for printing EXPLAIN plans was sometimes confusing because of
willingness to use the same alias for multiple RTEs (it was Ashutosh
Bapat's complaint about that aspect that started the January thread).
To fix, ensure that each RTE in the query has a unique unqualified alias,
by modifying the alias if necessary (we add "_" and digits as needed to
create a non-conflicting name). Then we can just print its variables with
that alias, avoiding the confusing and bug-prone scheme of sometimes
schema-qualifying variable names. In EXPLAIN, it proves to be expedient to
take the further step of only assigning such aliases to RTEs that are
actually referenced in the query, since the planner has a habit of
generating extra RTEs with the same alias in situations such as
inheritance-tree expansion.
Although this fixes a bug of very long standing, I'm hesitant to back-patch
such a noticeable behavioral change. My experiments while creating a
regression test convinced me that actually incorrect output (as opposed to
confusing output) occurs only in very narrow cases, which is backed up by
the lack of previous complaints from the field. So we may be better off
living with it in released branches; and in any case it'd be smart to let
this ripen awhile in HEAD before we consider back-patching it.
The initially implemented syntax, "CHECK NO INHERIT (expr)" was not
deemed very good, so switch to "CHECK (expr) NO INHERIT" instead. This
way it looks similar to SQL-standards compliant constraint attribute.
Backport to 9.2 where the new syntax and feature was introduced.
Per discussion.
Per recent discussion, the error message for this was actually a trifle
inaccurate, since it said "cannot be cast" which might be incorrect.
Adjust that wording, and add a HINT suggesting that a USING clause might
be needed.
The original syntax wasn't universally loved, and it didn't allow its
usage in CREATE TABLE, only ALTER TABLE. It now works everywhere, and
it also allows using ALTER TABLE ONLY to add an uninherited CHECK
constraint, per discussion.
The pg_constraint column has accordingly been renamed connoinherit.
This commit partly reverts some of the changes in
61d81bd28d, particularly some pg_dump and
psql bits, because now pg_get_constraintdef includes the necessary NO
INHERIT within the constraint definition.
Author: Nikhil Sontakke
Some tweaks by me
We now use the same error message for ALTER TABLE .. ADD COLUMN or
ALTER TABLE .. RENAME COLUMN that we do for CREATE TABLE. The old
message was accurate, but might be confusing to users not aware of our
system columns.
Vik Reykja, with some changes by me, and further proofreading by Tom Lane
Rip out a regression test that doesn't play well with settings put in
place by the build farm, and rewrite the code in CheckIndexCompatible
in a hopefully more transparent style.
This gives up the "don't rewrite the index" behavior in a couple of
relatively unimportant cases, such as changing between an array type
and an unconstrained domain over that array type, in return for
making this code more future-proof.
Noah Misch
This makes them enforceable only on the parent table, not on children
tables. This is useful in various situations, per discussion involving
people bitten by the restrictive behavior introduced in 8.4.
Message-Id:
8762mp93iw.fsf@comcast.netCAFaPBrSMMpubkGf4zcRL_YL-AERUbYF_-ZNNYfb3CVwwEqc9TQ@mail.gmail.com
Authors: Nikhil Sontakke, Alex Hunsaker
Reviewed by Robert Haas and myself
This should make it easier to identify which row is problematic when an
insert or update is processing many rows.
The formatting is similar to that for unique-index violation messages,
except that we limit field widths to 64 bytes since otherwise the message
could get unreasonably long. (In particular, there's currently no attempt
to quote or escape field values that contain commas etc.)
Jan Kundrát, reviewed by Royce Ausburn, somewhat rewritten by me.
When I consolidated two copies of the HOT-chain search logic in commit
4da99ea423, I introduced a behavior
change: the old code wouldn't necessarily traverse the entire chain,
if the most recently returned tuple were updated while the HOT chain
traversal is in progress. The new behavior seems more correct, but
unfortunately, the code here relies on a scan with SnapshotNow failing
to see its own updates. That seems pretty shaky even with the old HOT
chain traversal behavior, since there's no guarantee that these
updates will always be HOT, but it's trivial to broke a failure with
the new HOT search logic. Fix by updating just the first matching
pg_constraint tuple, rather than all of them, since there should be
only one anyway. But since nobody has reproduced this failure on older
versions, no back-patch for now.
Report and test case by Alex Hunsaker; tablecmds.c changes by me.
This means that they can initially be added to a large existing table
without checking its initial contents, but new tuples must comply to
them; a separate pass invoked by ALTER TABLE / VALIDATE can verify
existing data and ensure it complies with the constraint, at which point
it is marked validated and becomes a normal part of the table ecosystem.
An non-validated CHECK constraint is ignored in the planner for
constraint_exclusion purposes; when validated, cached plans are
recomputed so that partitioning starts working right away.
This patch also enables domains to have unvalidated CHECK constraints
attached to them as well by way of ALTER DOMAIN / ADD CONSTRAINT / NOT
VALID, which can later be validated with ALTER DOMAIN / VALIDATE
CONSTRAINT.
Thanks to Thom Brown, Dean Rasheed and Jaime Casanova for the various
reviews, and Robert Hass for documentation wording improvement
suggestions.
This patch was sponsored by Enova Financial.
We need this now because we allow domains over arrays, and we'll probably
allow domains over composites pretty soon, which makes the problem even
more obvious.
Although domains over arrays also exist in previous versions, this does not
need to be back-patched, because the coding used in older versions
successfully "looked through" domains over arrays. The problem is exposed
by not treating a domain as having a typelem.
Problem identified by Noah Misch, though I did not use his patch, since
it would require additional work to handle domains over composites that
way. This approach is more future-proof.
This syntax allows a standalone table to be made into a typed table,
or a typed table to be made standalone. This is possibly a mildly
useful feature in its own right, but the real motivation for this
change is that we need it to make pg_upgrade work with typed tables.
This doesn't actually fix that problem, but it's necessary
infrastructure.
Noah Misch
In \d, be more careful to print collation only if it's not the default for
the column's data type. Avoid assuming that the name "default" is magic.
Fix \d on a composite type so that it will print per-column collations.
It's no longer the case that a composite type cannot have modifiers.
(In consequence, the expected outputs for composite-type regression tests
change.)
Fix \dD so that it will print collation for a domain, again only if it's
not the same as the base type's collation.
Instead of using slightly-too-clever heuristics to decide when we must
create a TOAST table, just check whether one is needed every time the
table is altered. Checking whether a toast table is needed is cheap
enough that we needn't worry about doing it on every ALTER TABLE command,
and the previous coding is apparently prone to accidental breakage:
commit 04e17bae50 broken ALTER TABLE ..
SET STORAGE, which moved some actions from AT_PASS_COL_ATTRS to
AT_PASS_MISC, and commit 6c57239985 broke
ALTER TABLE .. ADD COLUMN by changing the way that adding columns
recurses into child tables.
Noah Misch, with one comment change by me
The previous coding set attinhcount too high in some cases, resulting in
an undumpable, undroppable column. Per bug #5856, reported by Naoya
Anzai. See also commit 31b6fc06d8, which
fixes a similar bug in ALTER TABLE .. ADD CONSTRAINT.
Patch by Noah Misch.
Eventually we might be able to allow that, but it's not clear how many
places need to be fixed to prevent infinite recursion when there's a direct
or indirect inclusion of a rowtype in itself. One such place is
CheckAttributeType(), which will recurse to stack overflow in cases such as
those exhibited in bug #5950 from Alex Perepelica. If we were sure it was
the only such place, we could easily modify the code added by this patch to
stop the recursion without a complaint ... but it probably isn't the only
such place. Hence, throw error until such time as someone is excited
enough about this type of usage to put work into making it safe.
Back-patch as far as 8.3. 8.2 doesn't have the recursive call in
CheckAttributeType in the first place, so I see no need to add code there
in the absence of clear evidence of a problem elsewhere.
FK constraints that are marked NOT VALID may later be VALIDATED, which uses an
ShareUpdateExclusiveLock on constraint table and RowShareLock on referenced
table. Significantly reduces lock strength and duration when adding FKs.
New state visible from psql.
Simon Riggs, with reviews from Marko Tiikkaja and Robert Haas
Failure to do so can lead to constraint violations. This was broken by
commit 1ddc2703a9 on 2010-02-07, so
back-patch to 9.0.
Noah Misch. Regression test by me.
Foreign tables are a core component of SQL/MED. This commit does
not provide a working SQL/MED infrastructure, because foreign tables
cannot yet be queried. Support for foreign table scans will need to
be added in a future patch. However, this patch creates the necessary
system catalog structure, syntax support, and support for ancillary
operations such as COMMENT and SECURITY LABEL.
Shigeru Hanada, heavily revised by Robert Haas
This adds support for changing the schema of a conversion, operator,
operator class, operator family, text search configuration, text search
dictionary, text search parser, or text search template.
Dimitri Fontaine, with assorted corrections and other kibitzing.
Index expression columns are now named after the FigureColname result for
their expressions, rather than always being "pg_expression_N". Digits are
appended to this name if needed to make the column name unique within the
index. (That happens for regular columns too, thus fixing the old problem
that CREATE INDEX fooi ON foo (f1, f1) fails. Before exclusion indexes
there was no real reason to do such a thing, but now maybe there is.)
Default names for indexes and associated constraints now include the column
names of all their columns, not only the first one as in previous practice.
(Of course, this will be truncated as needed to fit in NAMEDATALEN. Also,
pkey indexes retain the historical behavior of not naming specific columns
at all.)
An example of the results:
regression=# create table foo (f1 int, f2 text,
regression(# exclude (f1 with =, lower(f2) with =));
NOTICE: CREATE TABLE / EXCLUDE will create implicit index "foo_f1_lower_exclusion" for table "foo"
CREATE TABLE
regression=# \d foo_f1_lower_exclusion
Index "public.foo_f1_lower_exclusion"
Column | Type | Definition
--------+---------+------------
f1 | integer | f1
lower | text | lower(f2)
btree, for table "public.foo"
values being complained of.
In passing, also remove the arbitrary length limitation in the similar
error detail message for foreign key violations.
Itagaki Takahiro
get rid of the OID column. This eliminates the problem discovered by Heikki
back in November that 8.4's suppression of "unnecessary" junk filtering in
INSERT/SELECT could lead to an Assert failure, or storing of oids into a table
that shouldn't have them if Asserts are off. While that particular problem
could have been solved in other ways, it seems likely to be just a forerunner
of things to come if we continue to allow tables to contain rows that disagree
with the pg_class.relhasoids setting. It's better to make this operation slow
than to sacrifice performance or risk bugs in more common code paths.
Also, add ALTER TABLE SET WITH OIDS to rewrite the table to add oids.
This was a bit more controversial, but in view of the very small amount of
extra code needed given the current ALTER TABLE infrastructure, it seems best
to eliminate the asymmetry in features.
Robert Haas
Peter Eisentraut
Simon Riggs
Tom Lane
Stephen Frost
Heikki Linnakangas
Alvaro Herrera
Kevin Grittner
Andrew Dunstan
Bruce Momjian
Fujii Masao
Noah Misch