The idea behind this patch is to make it possible to run individual
test scripts without running the entire core test suite. Making all
the scripts completely independent would involve a massive rewrite,
and would probably be worse for coverage of things like concurrent DDL.
So this patch just does what seems practical with limited changes.
The net effect is that any test script can be run after running
limited earlier dependencies:
* all scripts depend on test_setup
* many scripts depend on create_index
* other dependencies are few in number, and are documented in
the parallel_schedule file.
To accomplish this, I chose a small number of commonly-used tables
and moved their creation and filling into test_setup. Later scripts
are expected not to modify these tables' data contents, for fear of
affecting other scripts' results. Also, our former habit of declaring
all C functions in one place is now gone in favor of declaring them
where they're used, if that's just one script, or in test_setup if
necessary.
There's more that could be done to remove some of the remaining
inter-script dependencies, but significantly more-invasive changes
would be needed, and at least for now it doesn't seem worth it.
Discussion: https://postgr.es/m/1114748.1640383217@sss.pgh.pa.us
This case should be disallowed, just as FOR UPDATE with a plain
GROUP BY is disallowed; FOR UPDATE only makes sense when each row
of the query result can be identified with a single table row.
However, we missed teaching CheckSelectLocking() to check
groupingSets as well as groupClause, so that it would allow
degenerate grouping sets. That resulted in a bad plan and
a null-pointer dereference in the executor.
Looking around for other instances of the same bug, the only one
I found was in examine_simple_variable(). That'd just lead to
silly estimates, but it should be fixed too.
Per private report from Yaoguang Chen.
Back-patch to all supported branches.
Our infinite_recurse() test to verify sane stack-overrun behavior
is affected by a bug of the Linux kernel on PPC64: it will get SIGSEGV
if it receives a signal when the stack depth is (a) over 1MB and
(b) within a few kB of filling the current physical stack allocation.
See https://bugzilla.kernel.org/show_bug.cgi?id=205183.
Since this test is a bit time-consuming and we run it in parallel with
test scripts that do a lot of DDL, it can be expected to get an sinval
catchup interrupt at some point, leading to failure if the timing is
wrong. This has caused more than 100 buildfarm failures over the
past year or so.
While a fix exists for the kernel bug, it might be years before that
propagates into all production kernels, particularly in some of the
older distros we have in the buildfarm. For now, let's just back off
and not run this test on Linux PPC64; that loses nothing in test
coverage so far as our own code is concerned.
To do that, split this test into a new script infinite_recurse.sql
and skip the test when the platform name is powerpc64...-linux-gnu.
Back-patch to v12. Branches before that have not been seen to get
this failure. No doubt that's because the "errors" test was not
run in parallel with other tests before commit 798070ec0, greatly
reducing the odds of an sinval catchup being necessary.
I also back-patched 3c8553547 into v12, just so the new regression
script would look the same in all branches having it.
Discussion: https://postgr.es/m/3479046.1602607848@sss.pgh.pa.us
Discussion: https://postgr.es/m/20190723162703.GM22387%40telsasoft.com
Since commit 8f59f6b9c0, CLOBBER_CACHE_ALWAYS buildfarm members have
been failing this test case because the error message now sometimes
includes an error cursor position. It seems largely just luck that
that never happened before, and there are likely to be more ways it
could happen in future. Hence, rather than trying to prevent it,
adjust the test script to suppress that component of the report.
At some point we might need to back-patch this, but refrain until
there's a demonstrated need. (We'd need a different fix before v12,
anyway, since VERBOSITY=sqlstate is a recent thing.)
Tom Lane and Andres Freund
Discussion: https://postgr.es/m/30675.1586111599@sss.pgh.pa.us
Previously tables declared WITH OIDS, including a significant fraction
of the catalog tables, stored the oid column not as a normal column,
but as part of the tuple header.
This special column was not shown by default, which was somewhat odd,
as it's often (consider e.g. pg_class.oid) one of the more important
parts of a row. Neither pg_dump nor COPY included the contents of the
oid column by default.
The fact that the oid column was not an ordinary column necessitated a
significant amount of special case code to support oid columns. That
already was painful for the existing, but upcoming work aiming to make
table storage pluggable, would have required expanding and duplicating
that "specialness" significantly.
WITH OIDS has been deprecated since 2005 (commit ff02d0a05280e0).
Remove it.
Removing includes:
- CREATE TABLE and ALTER TABLE syntax for declaring the table to be
WITH OIDS has been removed (WITH (oids[ = true]) will error out)
- pg_dump does not support dumping tables declared WITH OIDS and will
issue a warning when dumping one (and ignore the oid column).
- restoring an pg_dump archive with pg_restore will warn when
restoring a table with oid contents (and ignore the oid column)
- COPY will refuse to load binary dump that includes oids.
- pg_upgrade will error out when encountering tables declared WITH
OIDS, they have to be altered to remove the oid column first.
- Functionality to access the oid of the last inserted row (like
plpgsql's RESULT_OID, spi's SPI_lastoid, ...) has been removed.
The syntax for declaring a table WITHOUT OIDS (or WITH (oids = false)
for CREATE TABLE) is still supported. While that requires a bit of
support code, it seems unnecessary to break applications / dumps that
do not use oids, and are explicit about not using them.
The biggest user of WITH OID columns was postgres' catalog. This
commit changes all 'magic' oid columns to be columns that are normally
declared and stored. To reduce unnecessary query breakage all the
newly added columns are still named 'oid', even if a table's column
naming scheme would indicate 'reloid' or such. This obviously
requires adapting a lot code, mostly replacing oid access via
HeapTupleGetOid() with access to the underlying Form_pg_*->oid column.
The bootstrap process now assigns oids for all oid columns in
genbki.pl that do not have an explicit value (starting at the largest
oid previously used), only oids assigned later by oids will be above
FirstBootstrapObjectId. As the oid column now is a normal column the
special bootstrap syntax for oids has been removed.
Oids are not automatically assigned during insertion anymore, all
backend code explicitly assigns oids with GetNewOidWithIndex(). For
the rare case that insertions into the catalog via SQL are called for
the new pg_nextoid() function can be used (which only works on catalog
tables).
The fact that oid columns on system tables are now normal columns
means that they will be included in the set of columns expanded
by * (i.e. SELECT * FROM pg_class will now include the table's oid,
previously it did not). It'd not technically be hard to hide oid
column by default, but that'd mean confusing behavior would either
have to be carried forward forever, or it'd cause breakage down the
line.
While it's not unlikely that further adjustments are needed, the
scope/invasiveness of the patch makes it worthwhile to get merge this
now. It's painful to maintain externally, too complicated to commit
after the code code freeze, and a dependency of a number of other
patches.
Catversion bump, for obvious reasons.
Author: Andres Freund, with contributions by John Naylor
Discussion: https://postgr.es/m/20180930034810.ywp2c7awz7opzcfr@alap3.anarazel.de
The newly added ON CONFLICT clause allows to specify an alternative to
raising a unique or exclusion constraint violation error when inserting.
ON CONFLICT refers to constraints that can either be specified using a
inference clause (by specifying the columns of a unique constraint) or
by naming a unique or exclusion constraint. DO NOTHING avoids the
constraint violation, without touching the pre-existing row. DO UPDATE
SET ... [WHERE ...] updates the pre-existing tuple, and has access to
both the tuple proposed for insertion and the existing tuple; the
optional WHERE clause can be used to prevent an update from being
executed. The UPDATE SET and WHERE clauses have access to the tuple
proposed for insertion using the "magic" EXCLUDED alias, and to the
pre-existing tuple using the table name or its alias.
This feature is often referred to as upsert.
This is implemented using a new infrastructure called "speculative
insertion". It is an optimistic variant of regular insertion that first
does a pre-check for existing tuples and then attempts an insert. If a
violating tuple was inserted concurrently, the speculatively inserted
tuple is deleted and a new attempt is made. If the pre-check finds a
matching tuple the alternative DO NOTHING or DO UPDATE action is taken.
If the insertion succeeds without detecting a conflict, the tuple is
deemed inserted.
To handle the possible ambiguity between the excluded alias and a table
named excluded, and for convenience with long relation names, INSERT
INTO now can alias its target table.
Bumps catversion as stored rules change.
Author: Peter Geoghegan, with significant contributions from Heikki
Linnakangas and Andres Freund. Testing infrastructure by Jeff Janes.
Reviewed-By: Heikki Linnakangas, Andres Freund, Robert Haas, Simon Riggs,
Dean Rasheed, Stephen Frost and many others.
This fixes a problem noted as a followup to bug #8648: if a query has a
semantically-empty target list, e.g. SELECT * FROM zero_column_table,
ruleutils.c will dump it as a syntactically-empty target list, which was
not allowed. There doesn't seem to be any reliable way to fix this by
hacking ruleutils (note in particular that the originally zero-column table
might since have had columns added to it); and even if we had such a fix,
it would do nothing for existing dump files that might contain bad syntax.
The best bet seems to be to relax the syntactic restriction.
Also, add parse-analysis errors for SELECT DISTINCT with no columns (after
*-expansion) and RETURNING with no columns. These cases previously
produced unexpected behavior because the parsed Query looked like it had
no DISTINCT or RETURNING clause, respectively. If anyone ever offers
a plausible use-case for this, we could work a bit harder on making the
situation distinguishable.
Arguably this is a bug fix that should be back-patched, but I'm worried
that there may be client apps or PLs that expect "SELECT ;" to throw a
syntax error. The issue doesn't seem important enough to risk changing
behavior in minor releases.
Change SET LOCAL/CONSTRAINTS/TRANSACTION behavior outside of a
transaction block from error (post-9.3) to warning. (Was nothing in <=
9.3.) Also change ABORT outside of a transaction block from notice to
warning.
We now use the same error message for ALTER TABLE .. ADD COLUMN or
ALTER TABLE .. RENAME COLUMN that we do for CREATE TABLE. The old
message was accurate, but might be confusing to users not aware of our
system columns.
Vik Reykja, with some changes by me, and further proofreading by Tom Lane
CREATE AGGREGATE aggname (input_type) (parameter_list)
along with the old syntax where the input type was named in the parameter
list. This fits more naturally with the way that the aggregate is identified
in DROP AGGREGATE and other utility commands; furthermore it has a natural
extension to handle multiple-input aggregates, where the basetype-parameter
method would get ugly. In fact, this commit fixes the grammar and all the
utility commands to support multiple-input aggregates; but DefineAggregate
rejects it because the executor isn't fixed yet.
I didn't do anything about treating agg(*) as a zero-input aggregate instead
of artificially making it a one-input aggregate, but that should be considered
in combination with supporting multi-input aggregates.
during parse analysis, not only errors detected in the flex/bison stages.
This is per my earlier proposal. This commit includes all the basic
infrastructure, but locations are only tracked and reported for errors
involving column references, function calls, and operators. More could
be done later but this seems like a good set to start with. I've also
moved the ReportSyntaxErrorPosition logic out of psql and into libpq,
which should make it available to more people --- even within psql this
is an improvement because warnings weren't handled by ReportSyntaxErrorPosition.
pass if "default_with_oids" is set to false. I took the approach of
explicitly adding WITH OIDS to the CREATE TABLEs where necessary, rather
than tweaking the default_with_oids GUC var.
discussions. Patch by Fabien Coelho and Tom Lane. Still needs to be
taught about multi-screen-column kanji characters; Tatsuo has promised
to provide the needed infrastructure for that.
division and modulo functions, to avoid problems on OS X (which fails to
trap 0 divide at all) and Windows (which traps it in some bizarre
nonstandard fashion). Standardize on 'division by zero' as the one true
spelling of this error message. Add regression tests as suggested by
Neil Conway.
DROP RULE and COMMENT ON RULE syntax adds an 'ON tablename' clause,
similar to TRIGGER syntaxes. To allow loading of existing pg_dump
files containing COMMENT ON RULE, the COMMENT code will still accept
the old syntax --- but only if the target rulename is unique across
the whole database.
qualified operator names directly, for example CREATE OPERATOR myschema.+
( ... ). To qualify an operator name in an expression you need to write
OPERATOR(myschema.+) (thanks to Peter for suggesting an escape hatch).
I also took advantage of having to reformat pg_operator to fix something
that'd been bugging me for a while: mergejoinable operators should have
explicit links to the associated cross-data-type comparison operators,
rather than hardwiring an assumption that they are named < and >.
objects to be privilege-checked. Some change in their APIs would be
necessary no matter what in the schema environment, and simply getting
rid of the name-based interface entirely seems like the best way.
the parsetree representation. As yet we don't *do* anything with schema
names, just drop 'em on the floor; but you can enter schema-compatible
command syntax, and there's even a primitive CREATE SCHEMA command.
No doc updates yet, except to note that you can now extract a field
from a function-returning-row's result with (foo(...)).fieldname.
o Change all current CVS messages of NOTICE to WARNING. We were going
to do this just before 7.3 beta but it has to be done now, as you will
see below.
o Change current INFO messages that should be controlled by
client_min_messages to NOTICE.
o Force remaining INFO messages, like from EXPLAIN, VACUUM VERBOSE, etc.
to always go to the client.
o Remove INFO from the client_min_messages options and add NOTICE.
Seems we do need three non-ERROR elog levels to handle the various
behaviors we need for these messages.
Regression passed.
recreated since the start of our transaction, our first reference to it
errored out because we'd try to reuse our old relcache entry for it.
Do this by accepting SI inval messages just before relcache search in
heap_openr, so that dead relcache entries will be flushed before we
search. Also, break heap_open/openr into two pairs of routines,
relation_open(r) and heap_open(r). The relation_open routines make
no tests on relkind and so can be used to open anything that has a
pg_class entry. The heap_open routines are wrappers that add a relkind
test to preserve their established behavior. Use the relation_open
routines in several places that had various kluge solutions for opening
rels that might be either heap or index rels.
Also, remove the old 'heap stats' code that's been superseded by Jan's
stats collector, and clean up some inconsistencies in error reporting
between the different types of ALTER TABLE.
'aggname (aggtype)'. The old syntax 'aggname aggtype' is still accepted
for backwards compatibility. Fix pg_dump, which was actually broken for
most cases of user-defined aggregates. Clean up error messages associated
with these commands.
(WAL logging for this is not done yet, however.) Clean up a number of really
crufty things that are no longer needed now that DROP behaves nicely. Make
temp table mapper do the right things when drop or rename affecting a temp
table is rolled back. Also, remove "relation modified while in use" error
check, in favor of locking tables at first reference and holding that lock
throughout the statement.
as well allow DROP multiple INDEX, RULE, TYPE as well. Add missing
CommandCounterIncrement to DROP loop, which could cause trouble otherwise
with multiple DROP of items affecting same catalog entries. Try to
bring a little consistency to various error messages using 'does not exist',
'nonexistent', etc --- I standardized on 'does not exist' since that's
what the vast majority of the existing uses seem to be.
This patch forces the use of 'DROP VIEW' to destroy views.
It also changes the syntax of DROP VIEW to
DROP VIEW v1, v2, ...
to match the syntax of DROP TABLE.
Some error messages were changed so this patch also includes changes to the
appropriate expected/*.out files.
Doc changes for 'DROP TABLE" and 'DROP VIEW' are included.
--
Mark Hollomon
(Don't forget that an alias is required.) Views reimplemented as expanding
to subselect-in-FROM. Grouping, aggregates, DISTINCT in views actually
work now (he says optimistically). No UNION support in subselects/views
yet, but I have some ideas about that. Rule-related permissions checking
moved out of rewriter and into executor.
INITDB REQUIRED!
There's now only one transition value and transition function.
NULL handling in aggregates is a lot cleaner. Also, use Numeric
accumulators instead of integer accumulators for sum/avg on integer
datatypes --- this avoids overflow at the cost of being a little slower.
Implement VARIANCE() and STDDEV() aggregates in the standard backend.
Also, enable new LIKE selectivity estimators by default. Unrelated
change, but as long as I had to force initdb anyway...
Implement TIME WITH TIME ZONE type (timetz internal type).
Remap length() for character strings to CHAR_LENGTH() for SQL92
and to remove the ambiguity with geometric length() functions.
Keep length() for character strings for backward compatibility.
Shrink stored views by removing internal column name list from visible rte.
Implement min(), max() for time and timetz data types.
Implement conversion of TIME to INTERVAL.
Implement abs(), mod(), fac() for the int8 data type.
Rename some math functions to generic names:
round(), sqrt(), cbrt(), pow(), etc.
Rename NUMERIC power() function to pow().
Fix int2 factorial to calculate result in int4.
Enhance the Oracle compatibility function translate() to work with string
arguments (from Edwin Ramirez).
Modify pg_proc system table to remove OID holes.
Initdb help correction
Changed end/abort to commit/rollback and changed related notices
Commented out way old printing functions in libpq
Fixed a typo in alter table / alter column
SELECT DISTINCT ON (expr [, expr ...]) targetlist ...
and there is a check to make sure that the user didn't specify an ORDER BY
that's incompatible with the DISTINCT operation.
Reimplement nodeUnique and nodeGroup to use the proper datatype-specific
equality function for each column being compared --- they used to do
bitwise comparisons or convert the data to text strings and strcmp().
(To add insult to injury, they'd look up the conversion functions once
for each tuple...) Parse/plan representation of DISTINCT is now a list
of SortClause nodes.
initdb forced by querytree change...
Tom Lane
Andres Freund
Peter Eisentraut
Bruce Momjian
Robert Haas
Neil Conway
Thomas G. Lockhart