66c0185a3 adjusted the UNION planner to request that union child queries
produce Paths correctly ordered to implement the UNION by way of
MergeAppend followed by Unique. The code there made a bad assumption
that if the root->parent_root->parse had setOperations set that the
query must be the child subquery of a set operation. That's not true
when it comes to planning a non-inlined CTE which is parented by a set
operation. This causes issues as the CTE's targetlist has no
requirement to match up to the SetOperationStmt's groupClauses
Fix this by adding a new parameter to both subquery_planner() and
grouping_planner() to explicitly pass the SetOperationStmt only when
planning set operation child subqueries.
Thank you to Tom Lane for helping to rationalize the decision on the
best function signature for subquery_planner().
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/242fc7c6-a8aa-2daf-ac4c-0a231e2619c1@gmail.com
Until now, UNION queries have often been suboptimal as the planner has
only ever considered using an Append node and making the results unique
by either using a Hash Aggregate, or by Sorting the entire Append result
and running it through the Unique operator. Both of these methods
always require reading all rows from the union subqueries.
Here we adjust the union planner so that it can request that each subquery
produce results in target list order so that these can be Merge Appended
together and made unique with a Unique node. This can improve performance
significantly as the union child can make use of the likes of btree
indexes and/or Merge Joins to provide the top-level UNION with presorted
input. This is especially good if the top-level UNION contains a LIMIT
node that limits the output rows to a small subset of the unioned rows as
cheap startup plans can be used.
Author: David Rowley
Reviewed-by: Richard Guo, Andy Fan
Discussion: https://postgr.es/m/CAApHDvpb_63XQodmxKUF8vb9M7CxyUyT4sWvEgqeQU-GB7QFoQ@mail.gmail.com
Per buildfarm animal mylodon, the plan for this test was sometimes
swapping the join order for tenk1 and tenk2. Given that add_path() has
no code that would cause this fluctuation when given paths with consistent
costs, this indicates that the costs must be fluctuating in some runs.
The only proven reason I've seen where that could happen was slight
variations in pg_class.relpages for some tables. This was demonstrated to
be true by f03a9ca43 and related discussion. Manually adjusting tenk2's
pg_class.relpages by subtracting just 1 page does cause the plan to change
for this test.
Here we've not gone to the same lengths to prove that's what's going on
in this case. Proving that does not seem worth the time. Let's just
shrink one side of the join so the additional cost of the swapped join
order is sufficiently different that if the relpages estimate is off a few
pages that the planner still shouldn't swap the join order.
Reported-by: Thomas Munro
Author: Andy Fan, David Rowley
Discussion: https://postgr.es/m/CA+hUKGLqC-NobKYfjxNM3Gexv9OJ-Fhvy9bugUcXsZjTqH7W=Q@mail.gmail.com
Most of these tests have been introduced in 6dd8b00807, to check for
behaviors related to hashing and hash plans, and money is a data type
with btree support but no hash functions. These tests are switched to
use varbit instead, to provide the same coverage.
Some other tests historically used money but don't really need it for
what they wanted to test (see rules.sql). Plans and coverage are
unchanged after the modifications done here.
Support for money may be removed a a later point, but this needs more
discussion.
Discussion: https://postgr.es/m/18240-c5da758d7dc1ecf0@postgresql.org
While working on a8a968a82, I failed to consider that
cheapest_startup_path can be NULL when there is no non-parameterized
path in the pathlist. This is well documented in set_cheapest(), I just
failed to notice.
Here we adjust the code to just check if the RelOptInfo has a
cheapest_startup_path set before adding it to the startup_subpaths list.
Reported-by: Richard Guo
Author: Richard Guo
Discussion: https://postgr.es/m/CAMbWs49w3t03V69XhdCuw+GDwivny4uQUxrkVp6Gejaspt0wMQ@mail.gmail.com
6b94e7a6d did this for ordered append paths to allow fast startup
MergeAppends, however, nothing was done for the Append case.
Here we adjust add_paths_to_append_rel() to have it build an AppendPath
containing the cheapest startup paths from each of the child relations
when the append rel has "consider_startup" set.
Author: Andy Fan, David Rowley
Discussion: https://www.postgresql.org/message-id/CAKU4AWrXSkUV=Pt-gRxQT7EbfUeNssprGyNsB=5mJibFZ6S3ww@mail.gmail.com
Examine ParseNamespaceItem flags to detect whether a column name
is unreferenceable for lack of LATERAL, or could be referenced if
a qualified name were used, and give better hints for such cases.
Also, don't phrase the message to imply that there's only one
matching column when there is really more than one.
Many of the regression test output changes are not very interesting,
but just reflect reclassifying the "There is a column ... but it
cannot be referenced from this part of the query" messages as DETAIL
rather than HINT. They are details per our style guide, in the sense
of being factual rather than offering advice; and this change provides
room to offer actual HINTs about what to do.
While here, adjust the fuzzy-name-matching code to be a shade less
impenetrable. It was overloading the meanings of FuzzyAttrMatchState
fields way too much IMO, so splitting them into multiple fields seems
to make it clearer. It's not like we need to shave bytes in that
struct.
Per discussion of bug #17233 from Alexander Korolev.
Discussion: https://postgr.es/m/17233-afb9d806aaa64b17@postgresql.org
This reverts commit db0d67db24 and
several follow-on fixes. The idea of making a cost-based choice
of the order of the sorting columns is not fundamentally unsound,
but it requires cost information and data statistics that we don't
really have. For example, relying on procost to distinguish the
relative costs of different sort comparators is pretty pointless
so long as most such comparator functions are labeled with cost 1.0.
Moreover, estimating the number of comparisons done by Quicksort
requires more than just an estimate of the number of distinct values
in the input: you also need some idea of the sizes of the larger
groups, if you want an estimate that's good to better than a factor of
three or so. That's data that's often unknown or not very reliable.
Worse, to arrive at estimates of the number of calls made to the
lower-order-column comparison functions, the code needs to make
estimates of the numbers of distinct values of multiple columns,
which are necessarily even less trustworthy than per-column stats.
Even if all the inputs are perfectly reliable, the cost algorithm
as-implemented cannot offer useful information about how to order
sorting columns beyond the point at which the average group size
is estimated to drop to 1.
Close inspection of the code added by db0d67db2 shows that there
are also multiple small bugs. These could have been fixed, but
there's not much point if we don't trust the estimates to be
accurate in-principle.
Finally, the changes in cost_sort's behavior made for very large
changes (often a factor of 2 or so) in the cost estimates for all
sorting operations, not only those for multi-column GROUP BY.
That naturally changes plan choices in many situations, and there's
precious little evidence to show that the changes are for the better.
Given the above doubts about whether the new estimates are really
trustworthy, it's hard to summon much confidence that these changes
are better on the average.
Since we're hard up against the release deadline for v15, let's
revert these changes for now. We can always try again later.
Note: in v15, I left T_PathKeyInfo in place in nodes.h even though
it's unreferenced. Removing it would be an ABI break, and it seems
a bit late in the release cycle for that.
Discussion: https://postgr.es/m/TYAPR01MB586665EB5FB2C3807E893941F5579@TYAPR01MB5866.jpnprd01.prod.outlook.com
When evaluating a query with a multi-column GROUP BY clause using sort,
the cost may be heavily dependent on the order in which the keys are
compared when building the groups. Grouping does not imply any ordering,
so we're allowed to compare the keys in arbitrary order, and a Hash Agg
leverages this. But for Group Agg, we simply compared keys in the order
as specified in the query. This commit explores alternative ordering of
the keys, trying to find a cheaper one.
In principle, we might generate grouping paths for all permutations of
the keys, and leave the rest to the optimizer. But that might get very
expensive, so we try to pick only a couple interesting orderings based
on both local and global information.
When planning the grouping path, we explore statistics (number of
distinct values, cost of the comparison function) for the keys and
reorder them to minimize comparison costs. Intuitively, it may be better
to perform more expensive comparisons (for complex data types etc.)
last, because maybe the cheaper comparisons will be enough. Similarly,
the higher the cardinality of a key, the lower the probability we’ll
need to compare more keys. The patch generates and costs various
orderings, picking the cheapest ones.
The ordering of group keys may interact with other parts of the query,
some of which may not be known while planning the grouping. E.g. there
may be an explicit ORDER BY clause, or some other ordering-dependent
operation, higher up in the query, and using the same ordering may allow
using either incremental sort or even eliminate the sort entirely.
The patch generates orderings and picks those minimizing the comparison
cost (for various pathkeys), and then adds orderings that might be
useful for operations higher up in the plan (ORDER BY, etc.). Finally,
it always keeps the ordering specified in the query, on the assumption
the user might have additional insights.
This introduces a new GUC enable_group_by_reordering, so that the
optimization may be disabled if needed.
The original patch was proposed by Teodor Sigaev, and later improved and
reworked by Dmitry Dolgov. Reviews by a number of people, including me,
Andrey Lepikhov, Claudio Freire, Ibrar Ahmed and Zhihong Yu.
Author: Dmitry Dolgov, Teodor Sigaev, Tomas Vondra
Reviewed-by: Tomas Vondra, Andrey Lepikhov, Claudio Freire, Ibrar Ahmed, Zhihong Yu
Discussion: https://postgr.es/m/7c79e6a5-8597-74e8-0671-1c39d124c9d6%40sigaev.ru
Discussion: https://postgr.es/m/CA%2Bq6zcW_4o2NC0zutLkOJPsFt80megSpX_dVRo6GK9PC-Jx_Ag%40mail.gmail.com
Commit 01e658fa74 added hash support for row types. This also added
support for hashing anonymous record types, using the same approach
that the type cache uses for comparison support for record types: It
just reports that it works, but it might fail at run time if a
component type doesn't actually support the operation. We get away
with that for comparison because most types support that. But some
types don't support hashing, so the current state can result in
failures at run time where the planner chooses hashing over sorting,
whereas that previously worked if only sorting was an option.
We do, however, want the record hashing support for path tracking in
recursive unions, and the SEARCH and CYCLE clauses built on that. In
that case, hashing is the only plan option. So enable that, this
commit implements the following approach: The type cache does not
report that hashing is available for the record type. This undoes
that part of 01e658fa74. Instead, callers that require hashing no
matter what can override that result themselves. This patch only
touches the callers to make the aforementioned recursive query cases
work, namely the parse analysis of unions, as well as the hash_array()
function.
Reported-by: Sait Talha Nisanci <sait.nisanci@microsoft.com>
Bug: #17158
Discussion: https://www.postgresql.org/message-id/flat/17158-8a2ba823982537a4%40postgresql.org
Add hash functions for the record type as well as a hash operator
family and operator class for the record type. This enables all the
hash functionality for the record type such as hash-based plans for
UNION/INTERSECT/EXCEPT DISTINCT, recursive queries using UNION
DISTINCT, hash joins, and hash partitioning.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/38eccd35-4e2d-6767-1b3c-dada1eac3124%402ndquadrant.com
- Test hashing of an array of a non-hashable element type.
- Test UNION [DISTINCT] with hash- and sort-based plans. (Previously,
only INTERSECT and EXCEPT where tested there.)
- Test UNION [DISTINCT] with a non-hashable column type. This
currently reverts to a sort-based plan even if enable_hashagg is on.
- Test UNION/INTERSECT/EXCEPT hash- and sort-based plans with arrays
as column types. Also test an array with a non-hashable element
type.
- Test UNION/INTERSECT/EXCEPT similarly with row types as column
types. Currently, this uses only sort-based plans because there is
no hashing support for row types.
- Add a test case that shows that recursive queries using UNION
[DISTINCT] require hashable column types.
- Add a currently failing test that uses UNION DISTINCT in a
cycle-detection use case using row types as column types.
Discussion: https://www.postgresql.org/message-id/flat/38eccd35-4e2d-6767-1b3c-dada1eac3124%402ndquadrant.com
If an inheritance/partitioning parent table is assigned some column
alias names in the query, EXPLAIN mapped those aliases onto the
child tables' columns by physical position, resulting in bogus output
if a child table's columns aren't one-for-one with the parent's.
To fix, make expand_single_inheritance_child() generate a correctly
re-mapped column alias list, rather than just copying the parent
RTE's alias node. (We have to fill the alias field, not just
adjust the eref field, because ruleutils.c will ignore eref in
favor of looking at the real column names.)
This means that child tables will now always have alias fields in
plan rtables, where before they might not have. That results in
a rather substantial set of regression test output changes:
EXPLAIN will now always show child tables with aliases that match
the parent table (usually with "_N" appended for uniqueness).
But that seems like a net positive for understandability, since
the parent alias corresponds to something that actually appeared
in the original query, while the child table names didn't.
(Note that this does not change anything for cases where an explicit
table alias was written in the query for the parent table; it
just makes cases without such aliases behave similarly to that.)
Hence, while we could avoid these subsidiary changes if we made
inherit.c more complicated, we choose not to.
Discussion: https://postgr.es/m/12424.1575168015@sss.pgh.pa.us
create_merge_append_plan failed to honor the CP_EXACT_TLIST flag:
it would generate the expected targetlist but then it felt free to
add resjunk sort targets to it. This demonstrably leads to assertion
failures in v11 and HEAD, and it's probably just accidental that we
don't see the same in older branches. I've not looked into whether
there would be any real-world consequences in non-assert builds.
In HEAD, create_append_plan has sprouted the same problem, so fix
that too (although we do not have any test cases that seem able to
reach that bug). This is an oversight in commit 3fc6e2d7f which
invented the CP_EXACT_TLIST flag, so back-patch to 9.6 where that
came in.
convert_subquery_pathkeys would create pathkeys for subquery output
values if they match any EquivalenceClass known in the outer query
and are available in the subquery's syntactic targetlist. However,
the second part of that condition is wrong, because such values might
not appear in the subquery relation's reltarget list, which would
mean that they couldn't be accessed above the level of the subquery
scan. We must check that they appear in the reltarget list, instead.
This can lead to dropping knowledge about the subquery's sort
ordering, but I believe it's okay, because any sort key that the
outer query actually has any interest in would appear in the
reltarget list.
This second issue is of very long standing, but right now there's no
evidence that it causes observable problems before 9.6, so I refrained
from back-patching further than that. We can revisit that choice if
somebody finds a way to make it cause problems in older branches.
(Developing useful test cases for these issues is really problematic;
fixing convert_subquery_pathkeys removes the only known way to exhibit
the create_merge_append_plan bug, and neither of the test cases added
by this patch causes a problem in all branches, even when considering
the issues separately.)
The second issue explains bug #15795 from Suresh Kumar R ("could not
find pathkey item to sort" with nested DISTINCT queries). I stumbled
across the first issue while investigating that.
Discussion: https://postgr.es/m/15795-fadb56c8e44ee73c@postgresql.org
If there's only one child relation, the Append or MergeAppend isn't
doing anything useful, and can be elided. It does have a purpose
during planning though, which is to serve as a buffer between parent
and child Var numbering. Therefore we keep it all the way through
to setrefs.c, and get rid of it only after fixing references in the
plan level(s) above it. This works largely the same as setrefs.c's
ancient hack to get rid of no-op SubqueryScan nodes, and can even
share some code with that.
Note the change to make setrefs.c use apply_tlist_labeling rather than
ad-hoc code. This has the effect of propagating the child's resjunk
and ressortgroupref labels, which formerly weren't propagated when
removing a SubqueryScan. Doing that is demonstrably necessary for
the [Merge]Append cases, and seems harmless for SubqueryScan, if only
because trivial_subqueryscan is afraid to collapse cases where the
resjunk marking differs. (I suspect that restriction could now be
removed, though it's unclear that it'd make any new matches possible,
since the outer query can't have references to a child resjunk column.)
David Rowley, reviewed by Alvaro Herrera and Tomas Vondra
Discussion: https://postgr.es/m/CAKJS1f_7u8ATyJ1JGTMHFoKDvZdeF-iEBhs+sM_SXowOr9cArg@mail.gmail.com
Since 9.4, we've allowed the syntax "select union select" and variants
of that. However, the planner wasn't expecting a no-column set operation
and ended up treating the set operation as if it were UNION ALL.
Turns out it's trivial to fix in v10 and later; we just need to be careful
about not generating a Sort node with no sort keys. However, since a weird
corner case like this is never going to be exercised by developers, we'd
better have thorough regression tests if we want to consider it supported.
Per report from Victor Yegorov.
Discussion: https://postgr.es/m/CAGnEbojGJrRSOgJwNGM7JSJZpVAf8xXcVPbVrGdhbVEHZ-BUMw@mail.gmail.com
Perusal of the code coverage report shows that the existing regression
test cases for INTERSECT and EXCEPT seemingly all prefer the SETOP_HASHED
implementation. Add some test cases in which we force use of the
SETOP_SORTED mode.
As reported by Sean Johnston in bug #14614, since 9.6 the planner can fail
due to trying to look up the referent of a Var with varno 0. This happens
because we generate such Vars in generate_append_tlist, for lack of any
better way to describe the output of a SetOp node. In typical situations
nothing really cares about that, but given nested set-operation queries
we will call estimate_num_groups on the output of the subquery, and that
wants to know what a Var actually refers to. That logic used to look at
subquery->targetList, but in commit 3fc6e2d7f I'd switched it to look at
subroot->processed_tlist, ie the actual output of the subquery plan not the
parser's idea of the result. It seemed like a good idea at the time :-(.
As a band-aid fix, change it back.
Really we ought to have an honest way of naming the outputs of SetOp steps,
which suggests that it'd be a good idea for the parser to emit an RTE
corresponding to each one. But that's a task for another day, and it
certainly wouldn't yield a back-patchable fix.
Report: https://postgr.es/m/20170407115808.25934.51866@wrigleys.postgresql.org
I'd somehow talked myself into believing that set_append_rel_size
doesn't need to worry about getting back an AND clause when it applies
eval_const_expressions to the result of adjust_appendrel_attrs (that is,
transposing the appendrel parent's restriction clauses for one child).
But that is nonsense, and Andreas Seltenreich's fuzz tester soon
turned up a counterexample. Put back the make_ands_implicit step
that was there before, and add a regression test covering the case.
Report: https://postgr.es/m/878tq6vja6.fsf@ansel.ydns.eu
Evaluation of set returning functions (SRFs_ in the targetlist (like SELECT
generate_series(1,5)) so far was done in the expression evaluation (i.e.
ExecEvalExpr()) and projection (i.e. ExecProject/ExecTargetList) code.
This meant that most executor nodes performing projection, and most
expression evaluation functions, had to deal with the possibility that an
evaluated expression could return a set of return values.
That's bad because it leads to repeated code in a lot of places. It also,
and that's my (Andres's) motivation, made it a lot harder to implement a
more efficient way of doing expression evaluation.
To fix this, introduce a new executor node (ProjectSet) that can evaluate
targetlists containing one or more SRFs. To avoid the complexity of the old
way of handling nested expressions returning sets (e.g. having to pass up
ExprDoneCond, and dealing with arguments to functions returning sets etc.),
those SRFs can only be at the top level of the node's targetlist. The
planner makes sure (via split_pathtarget_at_srfs()) that SRF evaluation is
only necessary in ProjectSet nodes and that SRFs are only present at the
top level of the node's targetlist. If there are nested SRFs the planner
creates multiple stacked ProjectSet nodes. The ProjectSet nodes always get
input from an underlying node.
We also discussed and prototyped evaluating targetlist SRFs using ROWS
FROM(), but that turned out to be more complicated than we'd hoped.
While moving SRF evaluation to ProjectSet would allow to retain the old
"least common multiple" behavior when multiple SRFs are present in one
targetlist (i.e. continue returning rows until all SRFs are at the end of
their input at the same time), we decided to instead only return rows till
all SRFs are exhausted, returning NULL for already exhausted ones. We
deemed the previous behavior to be too confusing, unexpected and actually
not particularly useful.
As a side effect, the previously prohibited case of multiple set returning
arguments to a function, is now allowed. Not because it's particularly
desirable, but because it ends up working and there seems to be no argument
for adding code to prohibit it.
Currently the behavior for COALESCE and CASE containing SRFs has changed,
returning multiple rows from the expression, even when the SRF containing
"arm" of the expression is not evaluated. That's because the SRFs are
evaluated in a separate ProjectSet node. As that's quite confusing, we're
likely to instead prohibit SRFs in those places. But that's still being
discussed, and the code would reside in places not touched here, so that's
a task for later.
There's a lot of, now superfluous, code dealing with set return expressions
around. But as the changes to get rid of those are verbose largely boring,
it seems better for readability to keep the cleanup as a separate commit.
Author: Tom Lane and Andres Freund
Discussion: https://postgr.es/m/20160822214023.aaxz5l4igypowyri@alap3.anarazel.de
Upcoming changes to the hash table code used, among others, for grouping
and set operations will change the output order for a few queries. To
make it less likely that actual bugs are hidden between regression test
ordering changes, and to make the tests robust against platform
dependant ordering, add ORDER BYs guaranteeing the output order.
As it's possible that some of the changes expose platform dependant
ordering, push this earlier, to let the buildfarm shake out potentially
unstable results.
Discussion: <20160727004333.r3e2k2y6fvk2ntup@alap3.anarazel.de>
The previous coding in get_const_expr() tried to avoid quoting integer,
float, and numeric literals if at all possible. While that looks nice,
it means that dumped expressions might re-parse to something that's
semantically equivalent but not the exact same parsetree; for example
a FLOAT8 constant would re-parse as a NUMERIC constant with a cast to
FLOAT8. Though the result would be the same after constant-folding,
this is problematic in certain contexts. In particular, Jeff Davis
pointed out that this could cause unexpected failures in ALTER INHERIT
operations because of child tables having not-exactly-equivalent CHECK
expressions. Therefore, favor correctness over legibility and dump
such constants in quotes except in the limited cases where they'll
be interpreted as the same type even without any casting.
This results in assorted small changes in the regression test outputs,
and will affect display of user-defined views and rules similarly.
The odds of that causing problems in the field seem non-negligible;
given the lack of previous complaints, it seems best not to change
this in the back branches.
Commit a87c729153 already fixed the bug this
is checking for, but the regression test case it added didn't cover this
scenario. Since we managed to miss the fact that there was a bug at all,
it seems like a good idea to propagate the extra test case forward to HEAD.
The original coding of EquivalenceClasses didn't foresee that appendrel
child relations might themselves be appendrels; but this is possible for
example when a UNION ALL subquery scans a table with inheritance children.
The oversight led to failure to optimize ordering-related issues very well
for the grandchild tables. After some false starts involving explicitly
flattening the appendrel representation, we found that this could be fixed
easily by removing a few implicit assumptions about appendrel parent rels
not being children themselves.
Kyotaro Horiguchi and Tom Lane, reviewed by Noah Misch
My tweak of these error messages in commit c359a1b082 contained the
thinko that a query would always have rowMarks set for a query
containing a locking clause. Not so: when declaring a cursor, for
instance, rowMarks isn't set at the point we're checking, so we'd be
dereferencing a NULL pointer.
The fix is to pass the lock strength to the function raising the error,
instead of trying to reverse-engineer it. The result not only is more
robust, but it also seems cleaner overall.
Per report from Robert Haas.
The code in set_append_rel_pathlist() for building parameterized paths
for append relations (inheritance and UNION ALL combinations) supposed
that the cheapest regular path for a child relation would still be cheapest
when reparameterized. Which might not be the case, particularly if the
added join conditions are expensive to compute, as in a recent example from
Jeff Janes. Fix it to compare child path costs *after* reparameterizing.
We can short-circuit that if the cheapest pre-existing path is already
parameterized correctly, which seems likely to be true often enough to be
worth checking for.
Back-patch to 9.2 where parameterized paths were introduced.
The planner is aware that it mustn't push down upper-level quals into
subqueries if the quals reference subquery output columns that contain
set-returning functions or volatile functions, or are non-DISTINCT outputs
of a DISTINCT ON subquery. However, it missed making this check when
there were one or more levels of UNION or INTERSECT above the dangerous
expression. This could lead to "set-valued function called in context that
cannot accept a set" errors, as seen in bug #8213 from Eric Soroos, or to
silently wrong answers in the other cases.
To fix, refactor the checks so that we make the column-is-unsafe checks
during subquery_is_pushdown_safe(), which already has to recursively
inspect all arms of a set-operation tree. This makes
qual_is_pushdown_safe() considerably simpler, at the cost that we will
spend some cycles checking output columns that possibly aren't referenced
in any upper qual. But the cases where this code gets executed at all
are already nontrivial queries, so it's unlikely anybody will notice any
slowdown of planning.
This has been broken since commit 05f916e6ad,
which makes the bug over ten years old. A bit surprising nobody noticed it
before now.
The planner sometimes inserts Result nodes to perform column projections
(ie, arbitrary scalar calculations) above plan nodes that lack projection
logic of their own. However, we did that even if the lower plan node was
in fact producing the required column set already; which is a pretty common
case given the popularity of "SELECT * FROM ...". Measurements show that
the useless plan node adds non-negligible overhead, especially when there
are many columns in the result. So add a check to avoid inserting a Result
node unless there's something useful for it to do.
There are a couple of remaining places where unnecessary Result nodes
could get inserted, but they are (a) much less performance-critical,
and (b) coded in such a way that it's hard to avoid inserting a Result,
because the desired tlist is changed on-the-fly in subsequent logic.
We'll leave those alone for now.
Kyotaro Horiguchi; reviewed and further hacked on by Amit Kapila and
Tom Lane.
This patch implements the standard syntax of LATERAL attached to a
sub-SELECT in FROM, and also allows LATERAL attached to a function in FROM,
since set-returning function calls are expected to be one of the principal
use-cases.
The main change here is a rewrite of the mechanism for keeping track of
which relations are visible for column references while the FROM clause is
being scanned. The parser "namespace" lists are no longer lists of bare
RTEs, but are lists of ParseNamespaceItem structs, which carry an RTE
pointer as well as some visibility-controlling flags. Aside from
supporting LATERAL correctly, this lets us get rid of the ancient hacks
that required rechecking subqueries and JOIN/ON and function-in-FROM
expressions for invalid references after they were initially parsed.
Invalid column references are now always correctly detected on sight.
In passing, remove assorted parser error checks that are now dead code by
virtue of our having gotten rid of add_missing_from, as well as some
comments that are obsolete for the same reason. (It was mainly
add_missing_from that caused so much fudging here in the first place.)
The planner support for this feature is very minimal, and will be improved
in future patches. It works well enough for testing purposes, though.
catversion bump forced due to new field in RangeTblEntry.
In commit 57664ed25e I tried to fix a bug
reported by Teodor Sigaev by making non-simple-Var output columns distinct
(by wrapping their expressions with dummy PlaceHolderVar nodes). This did
not work too well. Commit b28ffd0fcc fixed
some ensuing problems with matching to child indexes, but per a recent
report from Claus Stadler, constraint exclusion of UNION ALL subqueries was
still broken, because constant-simplification didn't handle the injected
PlaceHolderVars well either. On reflection, the original patch was quite
misguided: there is no reason to expect that EquivalenceClass child members
will be distinct. So instead of trying to make them so, we should ensure
that we can cope with the situation when they're not.
Accordingly, this patch reverts the code changes in the above-mentioned
commits (though the regression test cases they added stay). Instead, I've
added assorted defenses to make sure that duplicate EC child members don't
cause any problems. Teodor's original problem ("MergeAppend child's
targetlist doesn't match MergeAppend") is addressed more directly by
revising prepare_sort_from_pathkeys to let the parent MergeAppend's sort
list guide creation of each child's sort list.
In passing, get rid of add_sort_column; as far as I can tell, testing for
duplicate sort keys at this stage is dead code. Certainly it doesn't
trigger often enough to be worth expending cycles on in ordinary queries.
And keeping the test would've greatly complicated the new logic in
prepare_sort_from_pathkeys, because comparing pathkey list entries against
a previous output array requires that we not skip any entries in the list.
Back-patch to 9.1, like the previous patches. The only known issue in
this area that wasn't caused by the ill-advised previous patches was the
MergeAppend planning failure, which of course is not relevant before 9.1.
It's possible that we need some of the new defenses against duplicate child
EC entries in older branches, but until there's some clear evidence of that
I'm going to refrain from back-patching further.
In commit 57664ed25e, I made the planner
wrap non-simple-variable outputs of appendrel children (IOW, child SELECTs
of UNION ALL subqueries) inside PlaceHolderVars, in order to solve some
issues with EquivalenceClass processing. However, this means that any
upper-level WHERE clauses mentioning such outputs will now contain
PlaceHolderVars after they're pushed down into the appendrel child,
and that prevents indxpath.c from recognizing that they could be matched
to index expressions. To fix, add explicit stripping of PlaceHolderVars
from index operands, same as we have long done for RelabelType nodes.
Add a regression test covering both this and the plain-UNION case (which
is a totally different code path, but should also be able to do it).
Per bug #6416 from Matteo Beccati. Back-patch to 9.1, same as the
previous change.
presented with an UNKNOWN-type Var, which can happen in cases where an
unknown literal appeared in a subquery. While many such cases will fail
later on anyway in the planner, there are some cases where the planner is
able to flatten the query and replace the Var by the constant before it has
to coerce the union column to the final type. I had added this check in 8.4
to provide earlier/better error detection, but it causes a regression for
some cases that worked OK before. Fix by not making the check if the input
node is UNKNOWN type and not a Const or Param. If it isn't going to work,
it will fail anyway at plan time, with the only real loss being inability to
provide an error cursor. Per gripe from Britt Piehler.
In passing, rename a couple of variables to remove confusion from an
inner scope masking the same variable names in an outer scope.
This completes my project of improving usage of hashing for duplicate
elimination (aggregate functions with DISTINCT remain undone, but that's
for some other day).
As with the previous patches, this means we can INTERSECT/EXCEPT on datatypes
that can hash but not sort, and it means that INTERSECT/EXCEPT without ORDER
BY are no longer certain to produce sorted output.
but seem like a separate patch since most of the remaining work is on the
executor side.) I took the opportunity to push selection of the grouping
operators for set operations into the parser where it belongs. Otherwise this
is just a small exercise in making prepunion.c consider both alternatives.
As with the recent DISTINCT patch, this means we can UNION on datatypes that
can hash but not sort, and it means that UNION without ORDER BY is no longer
certain to produce sorted output.
during parse analysis, not only errors detected in the flex/bison stages.
This is per my earlier proposal. This commit includes all the basic
infrastructure, but locations are only tracked and reported for errors
involving column references, function calls, and operators. More could
be done later but this seems like a good set to start with. I've also
moved the ReportSyntaxErrorPosition logic out of psql and into libpq,
which should make it available to more people --- even within psql this
is an improvement because warnings weren't handled by ReportSyntaxErrorPosition.
blanks, in hopes of reducing the surprise factor for newbies. Remove
redundant operators for VARCHAR (it depends wholly on TEXT operations now).
Clean up resolution of ambiguous operators/functions to avoid surprising
choices for domains: domains are treated as equivalent to their base types
and binary-coercibility is no longer considered a preference item when
choosing among multiple operators/functions. IsBinaryCoercible now correctly
reflects the notion that you need *only* relabel the type to get from type
A to type B: that is, a domain is binary-coercible to its base type, but
not vice versa. Various marginal cleanup, including merging the essentially
duplicate resolution code in parse_func.c and parse_oper.c. Improve opr_sanity
regression test to understand about binary compatibility (using pg_cast),
and fix a couple of small errors in the catalogs revealed thereby.
Restructure "special operator" handling to fetch operators via index opclasses
rather than hardwiring assumptions about names (cleans up the pattern_ops
stuff a little).
to be flexible about assignment casts without introducing ambiguity in
operator/function resolution. Introduce a well-defined promotion hierarchy
for numeric datatypes (int2->int4->int8->numeric->float4->float8).
Change make_const to initially label numeric literals as int4, int8, or
numeric (never float8 anymore).
Explicitly mark Func and RelabelType nodes to indicate whether they came
from a function call, explicit cast, or implicit cast; use this to do
reverse-listing more accurately and without so many heuristics.
Explicit casts to char, varchar, bit, varbit will truncate or pad without
raising an error (the pre-7.2 behavior), while assigning to a column without
any explicit cast will still raise an error for wrong-length data like 7.3.
This more nearly follows the SQL spec than 7.2 behavior (we should be
reporting a 'completion condition' in the explicit-cast cases, but we have
no mechanism for that, so just do silent truncation).
Fix some problems with enforcement of typmod for array elements;
it didn't work at all in 'UPDATE ... SET array[n] = foo', for example.
Provide a generalized array_length_coerce() function to replace the
specialized per-array-type functions that used to be needed (and were
missing for NUMERIC as well as all the datetime types).
Add missing conversions int8<->float4, text<->numeric, oid<->int8.
initdb forced.
the parsetree representation. As yet we don't *do* anything with schema
names, just drop 'em on the floor; but you can enter schema-compatible
command syntax, and there's even a primitive CREATE SCHEMA command.
No doc updates yet, except to note that you can now extract a field
from a function-returning-row's result with (foo(...)).fieldname.
SQL92 semantics, including support for ALL option. All three can be used
in subqueries and views. DISTINCT and ORDER BY work now in views, too.
This rewrite fixes many problems with cross-datatype UNIONs and INSERT/SELECT
where the SELECT yields different datatypes than the INSERT needs. I did
that by making UNION subqueries and SELECT in INSERT be treated like
subselects-in-FROM, thereby allowing an extra level of targetlist where the
datatype conversions can be inserted safely.
INITDB NEEDED!
Add additional tests in strings for conversions of the "name" data type.
Test SQL92 string functions such as SUBSTRING() and POSITION().
Fix geometry tests to reflect code fixed by Gautam.
Update error messages.
David Rowley
Michael Paquier
Tom Lane
Tomas Vondra
Peter Eisentraut
Andres Freund
Alvaro Herrera
Robert Haas
Peter Eisentraut
Thomas G. Lockhart