Make the primary messages more compact and make the detail messages
uniform. In initdb.c and pg_resetwal.c, use the newish
option_parse_int() to simplify some of the option parsing. For the
backend GUC wal_segment_size, add a GUC check hook to do the
verification instead of coding it in bootstrap.c. This might be
overkill, but that way the check is in the right place and it becomes
more self-documenting.
In passing, make pg_controldata use the logging API for warning
messages.
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Discussion: https://www.postgresql.org/message-id/flat/9939aa8a-d7be-da2c-7715-0a0b5535a1f7@eisentraut.org
There are still some alignment-related failures in the buildfarm,
which might or might not be able to be fixed quickly, but I've also
just realized that it increased the size of many WAL records by 4 bytes
because a block reference contains a RelFileLocator. The effect of that
hasn't been studied or discussed, so revert for now.
RelFileNumbers are now assigned using a separate counter, instead of
being assigned from the OID counter. This counter never wraps around:
if all 2^56 possible RelFileNumbers are used, an internal error
occurs. As the cluster is limited to 2^64 total bytes of WAL, this
limitation should not cause a problem in practice.
If the counter were 64 bits wide rather than 56 bits wide, we would
need to increase the width of the BufferTag, which might adversely
impact buffer lookup performance. Also, this lets us use bigint for
pg_class.relfilenode and other places where these values are exposed
at the SQL level without worrying about overflow.
This should remove the need to keep "tombstone" files around until
the next checkpoint when relations are removed. We do that to keep
RelFileNumbers from being recycled, but now that won't happen
anyway. However, this patch doesn't actually change anything in
this area; it just makes it possible for a future patch to do so.
Dilip Kumar, based on an idea from Andres Freund, who also reviewed
some earlier versions of the patch. Further review and some
wordsmithing by me. Also reviewed at various points by Ashutosh
Sharma, Vignesh C, Amul Sul, Álvaro Herrera, and Tom Lane.
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
Get rid of the separate "FATAL" log level, as it was applied
so inconsistently as to be meaningless. This mostly involves
s/pg_log_fatal/pg_log_error/g.
Create a macro pg_fatal() to handle the common use-case of
pg_log_error() immediately followed by exit(1). Various
modules had already invented either this or equivalent macros;
standardize on pg_fatal() and apply it where possible.
Invent the ability to add "detail" and "hint" messages to a
frontend message, much as we have long had in the backend.
Except where rewording was needed to convert existing coding
to detail/hint style, I have (mostly) resisted the temptation
to change existing message wording.
Patch by me. Design and patch reviewed at various stages by
Robert Haas, Kyotaro Horiguchi, Peter Eisentraut and
Daniel Gustafsson.
Discussion: https://postgr.es/m/1363732.1636496441@sss.pgh.pa.us
The patch needs test cases, reorganization, and cfbot testing.
Technically reverts commits 5c31afc49d..e35b2bad1a (exclusive/inclusive)
and 08db7c63f3..ccbe34139b.
Reported-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/E1ktAAG-0002V2-VB@gemulon.postgresql.org
This adds a key management system that stores (currently) two data
encryption keys of length 128, 192, or 256 bits. The data keys are
AES256 encrypted using a key encryption key, and validated via GCM
cipher mode. A command to obtain the key encryption key must be
specified at initdb time, and will be run at every database server
start. New parameters allow a file descriptor open to the terminal to
be passed. pg_upgrade support has also been added.
Discussion: https://postgr.es/m/CA+fd4k7q5o6Nc_AaX6BcYM9yqTbC6_pnH-6nSD=54Zp6NBQTCQ@mail.gmail.com
Discussion: https://postgr.es/m/20201202213814.GG20285@momjian.us
Author: Masahiko Sawada, me, Stephen Frost
Including Full in variable names duplicates the type information and
leads to overly long names. As FullTransactionId cannot accidentally
be casted to TransactionId that does not seem necessary.
Author: Andres Freund
Discussion: https://postgr.es/m/20200724011143.jccsyvsvymuiqfxu@alap3.anarazel.de
Because there is no portable int64/uint64 format specifier and we
can't stick macros like INT64_FORMAT into the middle of a translatable
string, we have been using various workarounds that put the number to
be printed into a string buffer first. Now that we always use our own
sprintf(), we can rely on %lld and %llu to work, so we can use those.
This patch undoes this workaround in a few places where it was
egregiously verbose.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/CAH2-Wz%3DWbNxc5ob5NJ9yqo2RMJ0q4HXDS30GVCobeCvC9A1L9A%40mail.gmail.com
The original placement of this module in src/fe_utils/ is ill-considered,
because several src/common/ modules have dependencies on it, meaning that
libpgcommon and libpgfeutils now have mutual dependencies. That makes it
pointless to have distinct libraries at all. The intended design is that
libpgcommon is lower-level than libpgfeutils, so only dependencies from
the latter to the former are acceptable.
We already have the precedent that fe_memutils and a couple of other
modules in src/common/ are frontend-only, so it's not stretching anything
out of whack to treat logging.c as a frontend-only module in src/common/.
To the extent that such modules help provide a common frontend/backend
environment for the rest of common/ to use, it's a reasonable design.
(logging.c does not yet provide an ereport() emulation, but one can
dream.)
Hence, move these files over, and revert basically all of the build-system
changes made by commit cc8d41511. There are no places that need to grow
new dependencies on libpgcommon, further reinforcing the idea that this
is the right solution.
Discussion: https://postgr.es/m/a912ffff-f6e4-778a-c86a-cf5c47a12933@2ndquadrant.com
This unifies the various ad hoc logging (message printing, error
printing) systems used throughout the command-line programs.
Features:
- Program name is automatically prefixed.
- Message string does not end with newline. This removes a common
source of inconsistencies and omissions.
- Additionally, a final newline is automatically stripped, simplifying
use of PQerrorMessage() etc., another common source of mistakes.
- I converted error message strings to use %m where possible.
- As a result of the above several points, more translatable message
strings can be shared between different components and between
frontends and backend, without gratuitous punctuation or whitespace
differences.
- There is support for setting a "log level". This is not meant to be
user-facing, but can be used internally to implement debug or
verbose modes.
- Lazy argument evaluation, so no significant overhead if logging at
some level is disabled.
- Some color in the messages, similar to gcc and clang. Set
PG_COLOR=auto to try it out. Some colors are predefined, but can be
customized by setting PG_COLORS.
- Common files (common/, fe_utils/, etc.) can handle logging much more
simply by just using one API without worrying too much about the
context of the calling program, requiring callbacks, or having to
pass "progname" around everywhere.
- Some programs called setvbuf() to make sure that stderr is
unbuffered, even on Windows. But not all programs did that. This
is now done centrally.
Soft goals:
- Reduces vertical space use and visual complexity of error reporting
in the source code.
- Encourages more deliberate classification of messages. For example,
in some cases it wasn't clear without analyzing the surrounding code
whether a message was meant as an error or just an info.
- Concepts and terms are vaguely aligned with popular logging
frameworks such as log4j and Python logging.
This is all just about printing stuff out. Nothing affects program
flow (e.g., fatal exits). The uses are just too varied to do that.
Some existing code had wrappers that do some kind of print-and-exit,
and I adapted those.
I tried to keep the output mostly the same, but there is a lot of
historical baggage to unwind and special cases to consider, and I
might not always have succeeded. One significant change is that
pg_rewind used to write all error messages to stdout. That is now
changed to stderr.
Reviewed-by: Donald Dong <xdong@csumb.edu>
Reviewed-by: Arthur Zakirov <a.zakirov@postgrespro.ru>
Discussion: https://www.postgresql.org/message-id/flat/6a609b43-4f57-7348-6480-bd022f924310@2ndquadrant.com
Instead of inferring epoch progress from xids and checkpoints,
introduce a 64 bit FullTransactionId type and use it to track xid
generation. This fixes an unlikely bug where the epoch is reported
incorrectly if the range of active xids wraps around more than once
between checkpoints.
The only user-visible effect of this commit is to correct the epoch
used by txid_current() and txid_status(), also visible with
pg_controldata, in those rare circumstances. It also creates some
basic infrastructure so that later patches can use 64 bit
transaction IDs in more places.
The new type is a struct that we pass by value, as a form of strong
typedef. This prevents the sort of accidental confusion between
TransactionId and FullTransactionId that would be possible if we
were to use a plain old uint64.
Author: Thomas Munro
Reported-by: Amit Kapila
Reviewed-by: Andres Freund, Tom Lane, Heikki Linnakangas
Discussion: https://postgr.es/m/CAA4eK1%2BMv%2Bmb0HFfWM9Srtc6MVe160WFurXV68iAFMcagRZ0dQ%40mail.gmail.com
Since its introduction, max_wal_senders is counted as part of
max_connections when it comes to define how many connection slots can be
used for replication connections with a WAL sender context. This can
lead to confusion for some users, as it could be possible to block a
base backup or replication from happening because other backend sessions
are already taken for other purposes by an application, and
superuser-only connection slots are not a correct solution to handle
that case.
This commit makes max_wal_senders independent of max_connections for its
handling of PGPROC entries in ProcGlobal, meaning that connection slots
for WAL senders are handled using their own free queue, like autovacuum
workers and bgworkers.
One compatibility issue that this change creates is that a standby now
requires to have a value of max_wal_senders at least equal to its
primary. So, if a standby created enforces the value of
max_wal_senders to be lower than that, then this could break failovers.
Normally this should not be an issue though, as any settings of a
standby are inherited from its primary as postgresql.conf gets normally
copied as part of a base backup, so parameters would be consistent.
Author: Alexander Kukushkin
Reviewed-by: Kyotaro Horiguchi, Petr Jelínek, Masahiko Sawada, Oleksii
Kliukin
Discussion: https://postgr.es/m/CAFh8B=nBzHQeYAu0b8fjK-AF1X4+_p6GRtwG+cCgs6Vci2uRuQ@mail.gmail.com
Commit c0d0e54084 replaced the ones in the documentation, but missed out
on the ones in the code. Replace those as well, but unlike c0d0e54084,
don't backpatch the code changes to avoid breaking translations.
We were running out of good single-letter options for some upcoming
pg_resetwal functionality, so add long options to create more
possibilities. Add to pg_controldata as well for symmetry.
based on patch by Bossart, Nathan <bossartn@amazon.com>
If the control file is corrupted and specifies the WAL segment size
to be 0 bytes, calculating the latest checkpoint's REDO WAL file
will fail with a division-by-zero error. Show it as "???" instead.
Also reword the warning message a bit and send it to stdout, like the
other pre-existing warning messages.
Add some tests for dealing with a corrupted pg_control file.
Author: Nathan Bossart <bossartn@amazon.com>, tests by me
Previously server reserved WAL for last two checkpoints,
which used too much disk space for small servers.
Bumps PG_CONTROL_VERSION
Author: Simon Riggs <simon@2ndQuadrant.com>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
For performance reasons a larger segment size than the default 16MB
can be useful. A larger segment size has two main benefits: Firstly,
in setups using archiving, it makes it easier to write scripts that
can keep up with higher amounts of WAL, secondly, the WAL has to be
written and synced to disk less frequently.
But at the same time large segment size are disadvantageous for
smaller databases. So far the segment size had to be configured at
compile time, often making it unrealistic to choose one fitting to a
particularly load. Therefore change it to a initdb time setting.
This includes a breaking changes to the xlogreader.h API, which now
requires the current segment size to be configured. For that and
similar reasons a number of binaries had to be taught how to recognize
the current segment size.
Author: Beena Emerson, editorialized by Andres Freund
Reviewed-By: Andres Freund, David Steele, Kuntal Ghosh, Michael
Paquier, Peter Eisentraut, Robert Hass, Tushar Ahuja
Discussion: https://postgr.es/m/CAOG9ApEAcQ--1ieKbhFzXSQPw_YLmepaa4hNdnY5+ZULpt81Mw@mail.gmail.com
This introduces a new generic SASL authentication method, similar to the
GSS and SSPI methods. The server first tells the client which SASL
authentication mechanism to use, and then the mechanism-specific SASL
messages are exchanged in AuthenticationSASLcontinue and PasswordMessage
messages. Only SCRAM-SHA-256 is supported at the moment, but this allows
adding more SASL mechanisms in the future, without changing the overall
protocol.
Support for channel binding, aka SCRAM-SHA-256-PLUS is left for later.
The SASLPrep algorithm, for pre-processing the password, is not yet
implemented. That could cause trouble, if you use a password with
non-ASCII characters, and a client library that does implement SASLprep.
That will hopefully be added later.
Authorization identities, as specified in the SCRAM-SHA-256 specification,
are ignored. SET SESSION AUTHORIZATION provides more or less the same
functionality, anyway.
If a user doesn't exist, perform a "mock" authentication, by constructing
an authentic-looking challenge on the fly. The challenge is derived from
a new system-wide random value, "mock authentication nonce", which is
created at initdb, and stored in the control file. We go through these
motions, in order to not give away the information on whether the user
exists, to unauthenticated users.
Bumps PG_CONTROL_VERSION, because of the new field in control file.
Patch by Michael Paquier and Heikki Linnakangas, reviewed at different
stages by Robert Haas, Stephen Frost, David Steele, Aleksander Alekseev,
and many others.
Discussion: https://www.postgresql.org/message-id/CAB7nPqRbR3GmFYdedCAhzukfKrgBLTLtMvENOmPrVWREsZkF8g%40mail.gmail.com
Discussion: https://www.postgresql.org/message-id/CAB7nPqSMXU35g%3DW9X74HVeQp0uvgJxvYOuA4A-A3M%2B0wfEBv-w%40mail.gmail.com
Discussion: https://www.postgresql.org/message-id/55192AFE.6080106@iki.fi
We don't need it any more.
pg_controldata continues to report that date/time type storage is
"64-bit integers", but that's now a hard-wired behavior not something
it sees in the data. This avoids breaking pg_upgrade, and perhaps other
utilities that inspect pg_control this way. Ditto for pg_resetwal.
I chose to remove the "bigint_timestamps" output column of
pg_control_init(), though, as that function hasn't been around long
and probably doesn't have ossified users.
Discussion: https://postgr.es/m/26788.1487455319@sss.pgh.pa.us
The previous patch broke this by returning NULL for a failed CRC check,
which pg_controldata would then try to read. Fix by returning the
result of the CRC check in a separate argument.
Michael Paquier and myself
pg_ctl used to determine whether a server was in standby mode by looking
for a recovery.conf file. With this change, it instead looks into
pg_control, which is potentially more accurate. There are also
occasional discussions about removing recovery.conf, so this removes one
dependency.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
The distinction between "archive" and "hot_standby" existed only because
at the time "hot_standby" was added, there was some uncertainty about
stability. This is now a long time ago. We would like to move forward
with simplifying the replication configuration, but this distinction is
in the way, because a primary server cannot tell (without asking a
standby or predicting the future) which one of these would be the
appropriate level.
Pick a new name for the combined setting to make it clearer that it
covers all (non-logical) backup and replication uses. The old values
are still accepted but are converted internally.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: David Steele <david@pgmasters.net>
Add four new SQL accessible functions: pg_control_system(),
pg_control_checkpoint(), pg_control_recovery(), and pg_control_init()
which expose a subset of the control file data.
Along the way move the code to read and validate the control file to
src/common, where it can be shared by the new backend functions
and the original pg_controldata frontend program.
Patch by me, significant input, testing, and review by Michael Paquier.
NextXID has been rendered in the form of a pg_lsn even though it
really is not. This can cause confusion, so change the format from
%u/%u to %u:%u, per discussion on hackers.
Complaint by me, patch by me and Bruce, reviewed by Michael Paquier
and Alvaro. Applied to HEAD only.
Author: Joe Conway, Bruce Momjian
Reviewed-by: Michael Paquier, Alvaro Herrera
Backpatch-through: master
The variables newestCommitTs and oldestCommitTs sound as if they are
timestamps, but in fact they are the transaction Ids that correspond
to the newest and oldest timestamps rather than the actual timestamps.
Rename these variables to reflect that they are actually xids: to wit
newestCommitTsXid and oldestCommitTsXid respectively. Also modify
related code in a similar fashion, particularly the user facing output
emitted by pg_controldata and pg_resetxlog.
Complaint and patch by me, review by Tom Lane and Alvaro Herrera.
Backpatch to 9.5 where these variables were first introduced.
Previously pg_controldata didn't report newestCommitTs and this was
an oversight in commit 73c986a.
Also this patch changes pg_resetxlog so that it uses the same sentences
as pg_controldata does, regarding oldestCommitTs and newestCommitTs,
for the sake of consistency.
Back-patch to 9.5 where track_commit_timestamp was added.
Euler Taveira
Until 9.4, pg_controldata output was all aligned. At some point
during 9.5 development, a new item was added, namely
"Current track_commit_timestamp setting:" which is two characters
too long to be aligned with the rest of the output. Fix this by
removing the noise word "Current" and adding the requisite number
of padding spaces. Since the six preceding items are also similar
in nature, remove "Current" and pad those as well in order to
maintain overall consistency. Backpatch to 9.5 where new offending
item was added.
Now that we use CRC-32C in WAL and the control file, the "traditional" and
"legacy" CRC-32 variants are not used in any frontend programs anymore.
Move the code for those back from src/common to src/backend/utils/hash.
Also move the slicing-by-8 implementation (back) to src/port. This is in
preparation for next patch that will add another implementation that uses
Intel SSE 4.2 instructions to calculate CRC-32C, where available.
Transactions can now set their commit timestamp directly as they commit,
or an external transaction commit timestamp can be fed from an outside
system using the new function TransactionTreeSetCommitTsData(). This
data is crash-safe, and truncated at Xid freeze point, same as pg_clog.
This module is disabled by default because it causes a performance hit,
but can be enabled in postgresql.conf requiring only a server restart.
A new test in src/test/modules is included.
Catalog version bumped due to the new subdirectory within PGDATA and a
couple of new SQL functions.
Authors: Álvaro Herrera and Petr Jelínek
Reviewed to varying degrees by Michael Paquier, Andres Freund, Robert
Haas, Amit Kapila, Fujii Masao, Jaime Casanova, Simon Riggs, Steven
Singer, Peter Eisentraut
The old algorithm was found to not be the usual CRC-32 algorithm, used by
Ethernet et al. We were using a non-reflected lookup table with code meant
for a reflected lookup table. That's a strange combination that AFAICS does
not correspond to any bit-wise CRC calculation, which makes it difficult to
reason about its properties. Although it has worked well in practice, seems
safer to use a well-known algorithm.
Since we're changing the algorithm anyway, we might as well choose a
different polynomial. The Castagnoli polynomial has better error-correcting
properties than the traditional CRC-32 polynomial, even if we had
implemented it correctly. Another reason for picking that is that some new
CPUs have hardware support for calculating CRC-32C, but not CRC-32, let
alone our strange variant of it. This patch doesn't add any support for such
hardware, but a future patch could now do that.
The old algorithm is kept around for tsquery and pg_trgm, which use the
values in indexes that need to remain compatible so that pg_upgrade works.
While we're at it, share the old lookup table for CRC-32 calculation
between hstore, ltree and core. They all use the same table, so might as
well.
It was confusing that to other commands, like initdb and postgres, you would
pass the data directory with "-D datadir", but pg_controldata and
pg_resetxlog would take just plain path, without the "-D". With this patch,
pg_controldata and pg_resetxlog also accept "-D datadir".
Abhijit Menon-Sen, with minor kibitzing by me
It's critical that the backend's idea of LOBLKSIZE match the way data has
actually been divided up in pg_largeobject. While we don't provide any
direct way to adjust that value, doing so is a one-line source code change
and various people have expressed interest recently in changing it. So,
just as with TOAST_MAX_CHUNK_SIZE, it seems prudent to record the value in
pg_control and cross-check that the backend's compiled-in setting matches
the on-disk data.
Also tweak the code in inv_api.c so that fetches from pg_largeobject
explicitly verify that the length of the data field is not more than
LOBLKSIZE. Formerly we just had Asserts() for that, which is no protection
at all in production builds. In some of the call sites an overlength data
value would translate directly to a security-relevant stack clobber, so it
seems worth one extra runtime comparison to be sure.
In the back branches, we can't change the contents of pg_control; but we
can still make the extra checks in inv_api.c, which will offer some amount
of protection against running with the wrong value of LOBLKSIZE.
WAL records of hint bit updates is useful to tools that want to examine
which pages have been modified. In particular, this is required to make
the pg_rewind tool safe (without checksums).
This can also be used to test how much extra WAL-logging would occur if
you enabled checksums, without actually enabling them (which you can't
currently do without re-initdb'ing).
Sawada Masahiko, docs by Samrat Revagade. Reviewed by Dilip Kumar, with
further changes by me.
When wal_level=logical, we'll log columns from the old tuple as
configured by the REPLICA IDENTITY facility added in commit
07cacba983. This makes it possible
a properly-configured logical replication solution to correctly
follow table updates even if they change the chosen key columns,
or, with REPLICA IDENTITY FULL, even if the table has no key at
all. Note that updates which do not modify the replica identity
column won't log anything extra, making the choice of a good key
(i.e. one that will rarely be changed) important to performance
when wal_level=logical is configured.
Each insert, update, or delete to a catalog table will also log
the CMIN and/or CMAX values of stamped by the current transaction.
This is necessary because logical decoding will require access to
historical snapshots of the catalog in order to decode some data
types, and the CMIN/CMAX values that we may need in order to judge
row visibility may have been overwritten by the time we need them.
Andres Freund, reviewed in various versions by myself, Heikki
Linnakangas, KONDO Mitsumasa, and many others.
In 9.3, there's no particular limit on the number of bgworkers;
instead, we just count up the number that are actually registered,
and use that to set MaxBackends. However, that approach causes
problems for Hot Standby, which needs both MaxBackends and the
size of the lock table to be the same on the standby as on the
master, yet it may not be desirable to run the same bgworkers in
both places. 9.3 handles that by failing to notice the problem,
which will probably work fine in nearly all cases anyway, but is
not theoretically sound.
A further problem with simply counting the number of registered
workers is that new workers can't be registered without a
postmaster restart. This is inconvenient for administrators,
since bouncing the postmaster causes an interruption of service.
Moreover, there are a number of applications for background
processes where, by necessity, the background process must be
started on the fly (e.g. parallel query). While this patch
doesn't actually make it possible to register new background
workers after startup time, it's a necessary prerequisite.
Patch by me. Review by Michael Paquier.
Peter Eisentraut
Robert Haas
Tom Lane
Bruce Momjian
Andres Freund
Amit Kapila
Michael Paquier
Thomas Munro
Magnus Hagander
Peter Eisentraut
Simon Riggs
Heikki Linnakangas
Joe Conway
Fujii Masao
Alvaro Herrera