Choose names that fit into the conventions for wait event names
(particularly, that multi-word names are in the style MultiWordName)
and hopefully convey more information to non-hacker users than the
previous names did.
Also rename SerializablePredicateLockListLock to
SerializablePredicateListLock; the old name was long enough to cause
table formatting problems, plus the double occurrence of "Lock" seems
confusing/error-prone.
Also change a couple of particularly opaque LWLock field names.
Discussion: https://postgr.es/m/28683.1589405363@sss.pgh.pa.us
This is numbered take 7, and addresses a set of issues around:
- Fixes for typos and incorrect reference names.
- Removal of unneeded comments.
- Removal of unreferenced functions and structures.
- Fixes regarding variable name consistency.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/10bfd4ac-3e7c-40ab-2b2e-355ed15495e8@gmail.com
Previously, the SERIALIZABLE isolation level prevented parallel query
from being used. Allow the two features to be used together by
sharing the leader's SERIALIZABLEXACT with parallel workers.
An extra per-SERIALIZABLEXACT LWLock is introduced to make it safe to
share, and new logic is introduced to coordinate the early release
of the SERIALIZABLEXACT required for the SXACT_FLAG_RO_SAFE
optimization, as follows:
The first backend to observe the SXACT_FLAG_RO_SAFE flag (set by
some other transaction) will 'partially release' the SERIALIZABLEXACT,
meaning that the conflicts and locks it holds are released, but the
SERIALIZABLEXACT itself will remain active because other backends
might still have a pointer to it.
Whenever any backend notices the SXACT_FLAG_RO_SAFE flag, it clears
its own MySerializableXact variable and frees local resources so that
it can skip SSI checks for the rest of the transaction. In the
special case of the leader process, it transfers the SERIALIZABLEXACT
to a new variable SavedSerializableXact, so that it can be completely
released at the end of the transaction after all workers have exited.
Remove the serializable_okay flag added to CreateParallelContext() by
commit 9da0cc35, because it's now redundant.
Author: Thomas Munro
Reviewed-by: Haribabu Kommi, Robert Haas, Masahiko Sawada, Kevin Grittner
Discussion: https://postgr.es/m/CAEepm=0gXGYhtrVDWOTHS8SQQy_=S9xo+8oCxGLWZAOoeJ=yzQ@mail.gmail.com
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Commit 4deb41381 modified isolationtester's query to see whether a
session is blocked to also check for waits occurring in GetSafeSnapshot.
However, it did that in a way that enormously increased the query's
runtime under CLOBBER_CACHE_ALWAYS, causing the buildfarm members
that use that to run about four times slower than before, and in some
cases fail entirely. To fix, push the entire logic into a dedicated
backend function. This should actually reduce the CLOBBER_CACHE_ALWAYS
runtime from what it was previously, though I've not checked that.
In passing, expose a SQL function to check for safe-snapshot blockage,
comparable to pg_blocking_pids. This is more or less free given the
infrastructure built to solve the other problem, so we might as well.
Thomas Munro
Discussion: https://postgr.es/m/20170407165749.pstcakbc637opkax@alap3.anarazel.de
In 83ff1618 we defined integer limits iff they're not provided by the
system. That turns out not to be the greatest idea because there's
different ways some datatypes can be represented. E.g. on OSX PG's 64bit
datatype will be a 'long int', but OSX unconditionally uses 'long
long'. That disparity then can lead to warnings, e.g. around printf
formats.
One way to fix that would be to back int64 using stdint.h's
int64_t. While a good idea it's not that easy to implement. We would
e.g. need to include stdint.h in our external headers, which we don't
today. Also computing the correct int64 printf formats in that case is
nontrivial.
Instead simply prefix the integer limits with PG_ and define them
unconditionally. I've adjusted all the references to them in code, but
not the ones in comments; the latter seems unnecessary to me.
Discussion: 20150331141423.GK4878@alap3.anarazel.de
Several submitted and even committed patches have run into the problem
that C89, our baseline, does not provide minimum/maximum values for
various integer datatypes. C99's stdint.h does, but we can't rely on
it.
Several parts of the code defined limits locally, so instead centralize
the definitions to c.h.
This patch also changes the more obvious usages of literal limit values;
there's more places that could be changed, but it's less clear whether
it's beneficial to change those.
Author: Andrew Gierth
Discussion: 87619tc5wc.fsf@news-spur.riddles.org.uk
If a tuple was frozen while its predicate locks mattered,
read-write dependencies could be missed, resulting in failure to
detect conflicts which could lead to anomalies in committed
serializable transactions.
This field was added to the tag when we still thought that it was
necessary to carry locks forward to a new version of an updated
row. That was later proven to be unnecessary, which allowed
simplification of the code, but elimination of xmin from the tag
was missed at the time.
Per report and analysis by Heikki Linnakangas.
Backpatch to 9.1.
transactions might not match the order the work done in those transactions
become visible to others. The logic in SSI, however, assumed that it does.
Fix that by having two sequence numbers for each serializable transaction,
one taken before a transaction becomes visible to others, and one after it.
This is easier than trying to make the the transition totally atomic, which
would require holding ProcArrayLock and SerializableXactHashLock at the same
time. By using prepareSeqNo instead of commitSeqNo in a few places where
commit sequence numbers are compared, we can make those comparisons err on
the safe side when we don't know for sure which committed first.
Per analysis by Kevin Grittner and Dan Ports, but this approach to fix it
is different from the original patch.
MARKED_FOR_DEATH flags into one. We still need the ROLLED_BACK flag to
mark transactions that are in the process of being rolled back. To be
precise, ROLLED_BACK now means that a transaction has already been
discounted from the count of transactions with the oldest xmin, but not
yet removed from the list of active transactions.
Dan Ports
the marked-for-death flag. It was only set for a fleeting moment while a
transaction was being cleaned up at rollback. All the places that checked
for the rolled-back flag should also check the marked-for-death flag, as
both flags mean that the transaction will roll back. I also renamed the
marked-for-death into "doomed", which is a lot shorter name.
Even if a flag is modified only by the backend owning the transaction, it's
not safe to modify it without a lock. Another backend might be setting or
clearing a different flag in the flags field concurrently, and that
operation might be lost because setting or clearing a bit in a word is not
atomic.
Make did-write flag a simple backend-private boolean variable, because it
was only set or tested in the owning backend (except when committing a
prepared transaction, but it's not worthwhile to optimize for the case of a
read-only prepared transaction). This also eliminates the need to add
locking where that flag is set.
Also, set the did-write flag when doing DDL operations like DROP TABLE or
TRUNCATE -- that was missed earlier.
Truncating or dropping a table is treated like deletion of all tuples, and
check for conflicts accordingly. If a table is clustered or rewritten by
ALTER TABLE, all predicate locks on the heap are promoted to relation-level
locks, because the tuple or page ids of any existing tuples will change and
won't be valid after rewriting the table. Arguably ALTER TABLE should be
treated like a mass-UPDATE of every row, but if you e.g change the datatype
of a column, you could also argue that it's just a change to the physical
layout, not a logical change. Reindexing promotes all locks on the index to
relation-level lock on the heap.
Kevin Grittner, with a lot of cosmetic changes by me.
Change the way UPDATEs are handled. Instead of maintaining a chain of
tuple-level locks in shared memory, copy any existing locks on the old
tuple to the new tuple at UPDATE. Any existing page-level lock needs to
be duplicated too, as a lock on the new tuple. That was neglected
previously.
Store xmin on tuple-level predicate locks, to distinguish a lock on an old
already-recycled tuple from a new tuple at the same physical location.
Failure to distinguish them caused loops in the tuple-lock chains, as
reported by YAMAMOTO Takashi. Although we don't use the chain representation
of UPDATEs anymore, it seems like a good idea to store the xmin to avoid
some false positives if no other reason.
CheckSingleTargetForConflictsIn now correctly handles the case where a lock
that's being held is not reflected in the local lock table. That happens
if another backend acquires a lock on our behalf due to an UPDATE or a page
split.
PredicateLockPageCombine now retains locks for the page that is being
removed, rather than removing them. This prevents a potentially dangerous
false-positive inconsistency where the local lock table believes that a lock
is held, but it is actually not.
Dan Ports and Kevin Grittner
Until now, our Serializable mode has in fact been what's called Snapshot
Isolation, which allows some anomalies that could not occur in any
serialized ordering of the transactions. This patch fixes that using a
method called Serializable Snapshot Isolation, based on research papers by
Michael J. Cahill (see README-SSI for full references). In Serializable
Snapshot Isolation, transactions run like they do in Snapshot Isolation,
but a predicate lock manager observes the reads and writes performed and
aborts transactions if it detects that an anomaly might occur. This method
produces some false positives, ie. it sometimes aborts transactions even
though there is no anomaly.
To track reads we implement predicate locking, see storage/lmgr/predicate.c.
Whenever a tuple is read, a predicate lock is acquired on the tuple. Shared
memory is finite, so when a transaction takes many tuple-level locks on a
page, the locks are promoted to a single page-level lock, and further to a
single relation level lock if necessary. To lock key values with no matching
tuple, a sequential scan always takes a relation-level lock, and an index
scan acquires a page-level lock that covers the search key, whether or not
there are any matching keys at the moment.
A predicate lock doesn't conflict with any regular locks or with another
predicate locks in the normal sense. They're only used by the predicate lock
manager to detect the danger of anomalies. Only serializable transactions
participate in predicate locking, so there should be no extra overhead for
for other transactions.
Predicate locks can't be released at commit, but must be remembered until
all the transactions that overlapped with it have completed. That means that
we need to remember an unbounded amount of predicate locks, so we apply a
lossy but conservative method of tracking locks for committed transactions.
If we run short of shared memory, we overflow to a new "pg_serial" SLRU
pool.
We don't currently allow Serializable transactions in Hot Standby mode.
That would be hard, because even read-only transactions can cause anomalies
that wouldn't otherwise occur.
Serializable isolation mode now means the new fully serializable level.
Repeatable Read gives you the old Snapshot Isolation level that we have
always had.
Kevin Grittner and Dan Ports, reviewed by Jeff Davis, Heikki Linnakangas and
Anssi Kääriäinen
Bruce Momjian
Tom Lane
Michael Paquier
Thomas Munro
Andres Freund
Kevin Grittner
Heikki Linnakangas