Among numerous other oversights, commit 482675987 neglected to fix
pg_dump to dump this new subscription option. Since the new default
is "false" while the previous behavior corresponds to "true", this
would cause legacy subscriptions to silently change behavior during
dump/reload or pg_upgrade. That seems like a bad idea. Even if it
was intended, failing to preserve the option once set in a new
installation is certainly not OK.
While here, reorder associated stanzas in pg_dump to match the
field order in pg_subscription, in hopes of reducing the impression
that all this code was written with the aid of a dartboard.
Back-patch to v16 where this new field was added.
Philip Warner (cosmetic tweaks by me)
Discussion: https://postgr.es/m/20231027042539.01A3A220F0A@thebes.rime.com.au
Add the 'checkunique' argument to bt_index_check() and bt_index_parent_check().
When the flag is specified the procedures will check the unique constraint
violation for unique indexes. Only one heap entry for all equal keys in
the index should be visible (including posting list entries). Report an error
otherwise.
pg_amcheck called with the --checkunique option will do the same check for all
the indexes it checks.
Author: Anastasia Lubennikova <lubennikovaav@gmail.com>
Author: Pavel Borisov <pashkin.elfe@gmail.com>
Author: Maxim Orlov <orlovmg@gmail.com>
Reviewed-by: Mark Dilger <mark.dilger@enterprisedb.com>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Reviewed-by: Peter Geoghegan <pg@bowt.ie>
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Discussion: https://postgr.es/m/CALT9ZEHRn5xAM5boga0qnrCmPV52bScEK2QnQ1HmUZDD301JEg%40mail.gmail.com
Since C99, there can be a trailing comma after the last value in an
enum definition. A lot of new code has been introducing this style on
the fly. Some new patches are now taking an inconsistent approach to
this. Some add the last comma on the fly if they add a new last
value, some are trying to preserve the existing style in each place,
some are even dropping the last comma if there was one. We could
nudge this all in a consistent direction if we just add the trailing
commas everywhere once.
I omitted a few places where there was a fixed "last" value that will
always stay last. I also skipped the header files of libpq and ecpg,
in case people want to use those with older compilers. There were
also a small number of cases where the enum type wasn't used anywhere
(but the enum values were), which ended up confusing pgindent a bit,
so I left those alone.
Discussion: https://www.postgresql.org/message-id/flat/386f8c45-c8ac-4681-8add-e3b0852c1620%40eisentraut.org
While reading information from the old cluster, a list of logical
slots is fetched. At the later part of upgrading, pg_upgrade revisits the
list and restores slots by executing pg_create_logical_replication_slot()
on the new cluster. Migration of logical replication slots is only
supported when the old cluster is version 17.0 or later.
If the old node has invalid slots or slots with unconsumed WAL records,
the pg_upgrade fails. These checks are needed to prevent data loss.
The significant advantage of this commit is that it makes it easy to
continue logical replication even after upgrading the publisher node.
Previously, pg_upgrade allowed copying publications to a new node. With
this patch, adjusting the connection string to the new publisher will
cause the apply worker on the subscriber to connect to the new publisher
automatically. This enables seamless continuation of logical replication,
even after an upgrade.
Author: Hayato Kuroda, Hou Zhijie
Reviewed-by: Peter Smith, Bharath Rupireddy, Dilip Kumar, Vignesh C, Shlok Kyal
Discussion: http://postgr.es/m/TYAPR01MB58664C81887B3AF2EB6B16E3F5939@TYAPR01MB5866.jpnprd01.prod.outlook.com
Discussion: http://postgr.es/m/CAA4eK1+t7xYcfa0rEQw839=b2MzsfvYDPz3xbD+ZqOdP3zpKYg@mail.gmail.com
1) Remove useless entries from "unlike" lists. Runs that are not
listed in "like" don't need to be excluded in "unlike".
2) Ensure there is always a "like" list, even if it is empty. This
makes the test more self-documenting.
3) Use predefined lists such as %full_runs where appropriate, instead
of listing all runs separately.
Also add code that checks 1 and 2 automatically and dies with an error
for violations.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://www.postgresql.org/message-id/flat/1f8cb371-e84e-434e-0367-6b716fb16fa1@eisentraut.org
This commit introduces trigger on login event, allowing to fire some actions
right on the user connection. This can be useful for logging or connection
check purposes as well as for some personalization of environment. Usage
details are described in the documentation included, but shortly usage is
the same as for other triggers: create function returning event_trigger and
then create event trigger on login event.
In order to prevent the connection time overhead when there are no triggers
the commit introduces pg_database.dathasloginevt flag, which indicates database
has active login triggers. This flag is set by CREATE/ALTER EVENT TRIGGER
command, and unset at connection time when no active triggers found.
Author: Konstantin Knizhnik, Mikhail Gribkov
Discussion: https://postgr.es/m/0d46d29f-4558-3af9-9c85-7774e14a7709%40postgrespro.ru
Reviewed-by: Pavel Stehule, Takayuki Tsunakawa, Greg Nancarrow, Ivan Panchenko
Reviewed-by: Daniel Gustafsson, Teodor Sigaev, Robert Haas, Andres Freund
Reviewed-by: Tom Lane, Andrey Sokolov, Zhihong Yu, Sergey Shinderuk
Reviewed-by: Gregory Stark, Nikita Malakhov, Ted Yu
Starting on 2023-08-03, this intermittently terminated a "pgbench -C"
test in CI. It could affect a high-client-count "pgbench" without "-C".
While parallel reindexdb and vacuumdb reach the same problematic check,
sufficient client count and/or connection turnover is less plausible for
them. Given the lack of examples from the buildfarm or from manual
builds, reproducing this must entail rare operating system
configurations. Also correct the associated error message, which was
wrong for non-Windows. Back-patch to v12, where the pgbench check first
appeared. While v11 vacuumdb has the problematic check, reaching it
with typical vacuumdb usage is implausible.
Reviewed by Thomas Munro.
Discussion: https://postgr.es/m/CA+hUKG+JwvTNdcyJTriy9BbtzF1veSRQ=9M_ZKFn9_LqE7Kp7Q@mail.gmail.com
AT TIME ZONE is completed with a list of supported timezones, something
not needed by AT LOCAL.
Author: Dagfinn Ilmari Mannsåker
Reviewed-by: Jim Jones
Discussion: https://postgr.es/m/87jzyzsvgv.fsf@wibble.ilmari.org
The present pg_resetwal code hardcodes the minimum value for -c as 2,
which is FrozenTransactionId, but it's not clear why that is allowed.
After some research, it was probably a mistake in the original patch.
Change it to FirstNormalTransactionId, which matches other xid-related
options in pg_resetwal.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://www.postgresql.org/message-id/flat/d09f0e91-8757-642b-1a92-da9a52f5589a%40eisentraut.org
Back in the 8.3 era we discovered that it was problematic if
libpq.so had encoding ID assignments different from the backend,
which is possible because on some platforms libpq.so might be
of a different major version from the calling programs.
psql should use libpq's assignments, but initdb has to use the
backend's, else it will put wrong values into pg_database.
The solution devised in commit 8468146b0 relied on giving initdb
its own copy of encnames.c rather than relying on the functions
exported by libpq. Later, that metamorphosed into ensuring that
libpgcommon got linked before libpq -- which made things OK for
initdb but broke psql. We didn't notice for lack of any changes
in enum pg_enc since then. Commit 06843df4a reversed that, fixing
the latent bug in psql but adding one in initdb. The meson build
infrastructure is also not being sufficiently careful about link
order, and trying to make it so would be equally fragile.
Hence, let's use a new scheme based on giving the libpq-exported
symbols different real names than the same functions exported from
libpgcommon.a or libpgcommon_srv.a. (We could distinguish those
two cases as well, but there seems no need to.) libpq gets the
official names to avoid an ABI break for libpq clients, while the
other cases use #define's to make the real names "xxx_private"
rather than "xxx". By controlling where the #define's are
applied, we can force any particular client program to use one
set or the other of the encnames.c functions.
We cannot back-patch this, since it'd be an ABI break for backend
loadable modules, but there seems little need to. We're just
trying to ensure that the world is safe for hypothetical future
additions to enum pg_enc.
In passing this should fix "duplicate symbol" linker warnings
that we've been seeing on AIX buildfarm members since commit
06843df4a. It's not very clear why that linker is complaining
now, when there were strictly *more* duplicates visible before,
but in any case this should remove the reason for complaint.
Patch by me; thanks to Andres Freund for review.
Discussion: https://postgr.es/m/2385119.1696354473@sss.pgh.pa.us
This seemed inconsistent with the --help output of other tools.
Depending on the values, it can cause ugly formatting. Also, we're
not getting the defaults from libpq, we're just emulating the methods
libpq uses to derive these values, so they might not be 100% correct.
Author: Atsushi Torikoshi <torikoshia@oss.nttdata.com>
Discussion: https://www.postgresql.org/message-id/flat/50ca8ff35a8dd8f9ec89963b503571a7@oss.nttdata.com
Previously, the JSON code didn't have to worry too much about freeing
JsonLexContext, because it was never too long-lived. With new features
being added for SQL/JSON this is no longer the case. Add a routine
that knows how to free this struct and apply that to a few places, to
prevent this from becoming problematic.
At the same time, we change the API of makeJsonLexContextCstringLen to
make it receive a pointer to JsonLexContext for callers that want it to
be stack-allocated; it can also be passed as NULL to get the original
behavior of a palloc'ed one.
This also causes an ABI break due to the addition of flags to
JsonLexContext, so we can't easily backpatch it. AFAICS that's not much
of a problem; apparently some leaks might exist in JSON usage of
text-search, for example via json_to_tsvector, but I haven't seen any
complaints about that.
Per Coverity complaint about datum_to_jsonb_internal().
Discussion: https://postgr.es/m/20230808174110.oq3iymllsv6amkih@alvherre.pgsql
The comment
/* On some platforms, readline is declared as readline(char *) */
is obsolete. The casting away of const can be removed.
The const in the readline() prototype was added in GNU readline 4.2,
released in 2001. BSD libedit has also had const in the prototype
since at least 2001.
(The commit that introduced this comment (187e865174) talked about
FreeBSD 4.8, which didn't have readline compatibility in libedit yet,
so it must have been talking about GNU readline in the base system.
This checks out, but already FreeBSD 5 had an updated GNU readline
with const.)
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/862fc1d4-9a0c-d2b6-5451-ee3dc750bcab%40eisentraut.org
The list form of stat() is an inelegant API as it relies on the position
of the file size in the list returned in result. Like in any other
places of the tree, replace that with a -s switch instead.
Another suggestion from Dagfinn is File::Stat, which we've been already
using for some other fields. It really comes down to a matter of taste
to choose that over -s, and the latter is more used in the tree.
Author: Bertrand Drouvot
Reviewed-by: Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/b2020df7-d0fc-4ea5-b2a9-7efc6d36b2ac@gmail.com
In a selective restore, ACLs for a table should be dumped if the
table is selected to be dumped. However, if the table has both
table-level and column-level ACLs, only the table-level ACL was
restored. This happened because _tocEntryRequired assumed that
an ACL could have only one dependency (the one on its table),
and punted if there was more than one. But since commit ea9125304,
column-level ACLs also depend on the table-level ACL if any, to
ensure correct ordering in parallel restores. To fix, adjust the
logic in _tocEntryRequired to ignore dependencies on ACLs.
I extended a test case in 002_pg_dump.pl so that it purports to
test for this; but in fact the test passes even without the fix.
That's because this bug only manifests during a selective restore,
while the scenarios 002_pg_dump.pl tests include only selective dumps.
Perhaps somebody would like to extend the script so that it can test
scenarios including selective restore, but I'm not touching that.
Euler Taveira and Tom Lane, per report from Kong Man.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/DM4PR11MB73976902DBBA10B1D652F9498B06A@DM4PR11MB7397.namprd11.prod.outlook.com
SetResultVariables() was not getting called when "printing" a result
that failed (see around PrintQueryResult), which would cause some
variables to not be set, like ROW_COUNT, SQLSTATE or ERROR. This can be
confusing as a previous result would be retained.
This state could be reached when failing to process tuples in a few
commands, like \gset when it returns no tuples, or \crosstabview. A
test is added, based on \gset.
This is arguably a bug fix, but no backpatch is done as there is a risk
of breaking scripts that rely on the previous behavior, even if they do
so accidentally.
Reported-by: amutu
Author: Japin Li
Reviewed-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/18134-87126d90cb4dd049@postgresql.org
The comment claimed that pg_resetwal updates the pg_control file if it
is of an old version. This has apparently never been true. Also, in
c3c09be34b, another comment was added elsewhere that this currently
does not happen. So this comment is wrong and redundant and can be
removed.
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Discussion: https://www.postgresql.org/message-id/flat/0f3ab4a1-ae80-56e8-3426-6b4a02507687@eisentraut.org
There was a mismatch between the const qualifiers for
excludeDirContents in src/backend/backup/basebackup.c and
src/bin/pg_rewind/filemap.c, which led to a quick search for similar
cases. We should make excludeDirContents match, but the rest of the
changes seem like a good idea as well.
Author: David Steele <david@pgmasters.net>
Discussion: https://www.postgresql.org/message-id/flat/669a035c-d23d-2f38-7ff0-0cb93e01d610@pgmasters.net
For some reason I used not_like = { pg_dumpall_dbprivs => 1, } in the test
condition of one of the tests added in in c66a7d75e6. That doesn't make sense
for two reasons: 1) not_like isn't a valid test condition 2) the database
should not be dumped in any of the tests. Due to 1), the test achieved its
goal, but clearly the formulation is confusing. Instead use like => {}, with
a comment explaining why.
Reported-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/3ddf79f2-8b7b-a093-11d2-5c739bc64f86@eisentraut.org
Backpatch: 11-, like c66a7d75e6
The --help output stated that schemas were specified using PATTERN
when they in fact aren't pattern matched but are required to be
exact matches. This changes to SCHEMA to make that clear.
Backpatch through v16 where this was introduced.
Author: Kuwamura Masaki <kuwamura@db.is.i.nagoya-u.ac.jp>
Discussion: https://postgr.es/m/CAMyC8qp9mXPQd5D6s6CJxvmignsbTqGZwDDB6VYJOn1A8WG38w@mail.gmail.com
Backpatch-through: 16
When specifying multiple schemas to exclude with -N parameters, none
of the schemas are actually excluded (a single -N worked as expected).
This fixes the catalog query to handle multiple exclusions and adds a
test for this case.
Backpatch to v16 where this was introduced.
Author: Nathan Bossart <nathandbossart@gmail.com>
Author: Kuwamura Masaki <kuwamura@db.is.i.nagoya-u.ac.jp>
Reported-by: Kuwamura Masaki <kuwamura@db.is.i.nagoya-u.ac.jp>
Discussion: https://postgr.es/m/CAMyC8qp9mXPQd5D6s6CJxvmignsbTqGZwDDB6VYJOn1A8WG38w@mail.gmail.com
Backpatch-through: 16
Commit cda6a8d01d removed a few datatypes, but didn't update
pg_upgrade --check to throw error if these types are used. So the users
find that pg_upgrade --check tells them that everything is fine, only to
fail when the real upgrade is attempted.
Reviewed-by: Tristan Partin <tristan@neon.tech>
Reviewed-by: Suraj Kharage <suraj.kharage@enterprisedb.com>
Discussion: https://postgr.es/m/202309201654.ng4ksea25mti@alvherre.pgsql
As physical replication work at the cluster level and not database
level, any dbname in the connection string is ignored. Proxies and
middleware used in connecting to the cluster might however need to
know the dbname in order to make the correct routing decision for
the connection.
With this the startup packet will include the dbname parameter.
Author: Jelte Fennema-Nio <me@jeltef.nl>
Reviewed-by: Tristen Raab <tristen.raab@highgo.ca>
Reviewed-by: Jim Jones <jim.jones@uni-muenster.de>
Discussion: https://postgr.es/m/CAGECzQTw-dZkVT_RELRzfWRzY714-VaTjoBATYfZq93R8C-auA@mail.gmail.com
ae78cae3b added the --buffer-usage-limit to vacuumdb to allow it to
include the BUFFER_USAGE_LIMIT option in the VACUUM command.
Unfortunately, that commit forgot to adjust the code so the option was
added to the ANALYZE command when the -Z command line argument was
specified.
There were no issues with the -z command as that option just adds
ANALYZE to the VACUUM command.
In passing adjust the code to escape the --buffer-usage-limit option
before passing it to the server. It seems nothing beyond a confusing
error message could become this lack of escaping as VACUUM cannot be
specified in a multi-command string.
Reported-by: Ryoga Yoshida
Author: Ryoga Yoshida, David Rowley
Discussion: https://postgr.es/m/08930c0b541700a5264e5fbf3a685f5a%40oss.nttdata.com
Backpatch-through: 16, where ae78cae3b was introduced.
Thanks to commit 5af0263afd, binaryheap is available to frontend
code. This commit replaces the open-coded heap implementation in
pg_dump_sort.c with a binaryheap, saving a few lines of code.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/3612876.1689443232%40sss.pgh.pa.us
If any of these commands fail during editing or pre-processing, the
command stored in the query buffer would remain around without being
executed immediately as PSQL_CMD_ERROR is returned as status. The next
command provided by the user would run it, likely causing failures as
this could include silently some of the contents generated automatically
for views or functions.
The problems would be different depending on the psql meta-command used:
- For \ev and \ef, some errors can happen in a predictable way while
doing an object lookup or while creating an object command. A failure
while editing is equally problematic, but the class of failures
happening in the code path of do_edit() are unlikely. The query reset
is kept in exec_command_ef_ev() as a query may be unchanged.
- For \e, error can happen while editing.
In both cases, the query buffer is reset on error for an incorrect file
number provided, whose value check is done before filling up the query
buffer.
This is a slight change of behavior compared to the past for some of the
predictable error patterns for \ev and \ef, so for now I have made the
choice to not backpatch this commit (argument particularly available for
v11 that's going to be EOL'd soon). Perhaps this could be revisited
later depending on the feedback of this new behavior.
Author: Ryoga Yoshida, Michael Paquier
Reviewed-by: Aleksander Alekseev, Kyotaro Horiguchi
Discussion: https://postgr.es/m/01419622d84ef093fd4fe585520bf03c@oss.nttdata.com
Presently, parallel restores spend a lot of time sorting this list
so that we pick the largest items first. With many tables, this
sorting can become a significant bottleneck. There are a couple of
reports from the field about this, and it is easy to reproduce.
This commit improves the performance of parallel pg_restore with
many tables by converting its ready_list to a priority queue, i.e.,
a binary heap. We will first try to run the highest priority item,
but if it cannot be chosen due to the lock heuristic, we'll do a
sequential scan through the heap nodes until we find one that is
runnable. This means that we might end up picking an item with a
much lower priority. However, we expect that we will typically be
able to pick one of the first few items, which should usually have
a relatively high priority.
Suggested-by: Tom Lane
Tested-by: Pierre Ducroquet
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/3612876.1689443232%40sss.pgh.pa.us
It was reported as misaligned by Kyotaro, but it also needed to be
turned into a single translatable phrase (like the one for \g is), as
reported by Yugo.
This is a new issue (commit f347ec76e2), so no backpatch is needed.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Yugo NAGATA <nagata@sraoss.co.jp>
Discussion: https://postgr.es/m/20230907.142956.2038600444404289870.horikyota.ntt@gmail.com
The majority of all filenames are quoted in user facing error and
log messages, but a few were still printed without quotes. While
these filenames do not risk causing any ambiguity as their format
is strict, quote them anyways to be consistent across all logs.
Also concatenate a message to keep it one line to make it easier
to grep for in the code.
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/080EEABE-6645-4A46-AB20-6285ADAC44FE@yesql.se
Previously, the test relied on a trick with a shell to retrieve the PID
of the psql session to be stopped with SIGINT, that was skipped on
Windows. This commit changes the test to use IPC::Run::signal()
instead, which still does not work on Windows, but for a different
reason: SIGINT would stop the test before finishing.
This should allow the test to run on non-Windows platforms where PPID is
not supported (like NetBSD), spreading it a bit more across the
buildfarm. And the logic of the test is simpler.
It is the first time in the tree that IPC::Run::signal() is used, so, as
a matter of safety (or just call that as me having cold feet), no
backpatch is done, at least for now.
Author: Yugo NAGATA
Reviewed-by: Fabien Coelho
Discussion: https://postgr.es/m/20230810125935.22c2922ea5250ba79358965b@sraoss.co.jp
This changes 020_cancel.pl so as the test is entirely skipped on
Windows. This test was already doing nothing under WIN32, except
initializing and starting a node without using it so this shaves a few
test cycles.
Author: Yugo NAGATA
Reviewed-by: Fabien Coelho
Discussion: https://postgr.es/m/20230810125935.22c2922ea5250ba79358965b@sraoss.co.jp
Backpatch-through: 15
pgbouncer can cause PQbackendPID() to return negative values due to it
filling be_pid with random bytes (even these days pid_max can only be
set up to 2^22 on 64b machines on Linux, for example, so this cannot
happen with normal PID numbers). When this happens, pg_basebackup may
generate a temporary slot name that may not be accepted by the parser,
leading to spurious failures, like:
pg_basebackup: error: could not send replication command
ERROR: replication slot name "pg_basebackup_-1201966863" contains
invalid character
This commit fixes that problem by formatting the result from
PQbackendPID() as an unsigned integer when creating the temporary
replication slot name, so as the invalid character is gone and the
command can be parsed.
Author: Jelte Fennema
Reviewed-by: Daniel Gustafsson, Nishant Sharma
Discussion: https://postgr.es/m/CAGECzQQOGvYfp8ziF4fWQ_o8s2K7ppaoWBQnTmdakn3s-4Z=5g@mail.gmail.com
Backpatch-through: 11
This commit allows specifying a --sync-method in several frontend
utilities that must synchronize many files to disk (initdb,
pg_basebackup, pg_checksums, pg_dump, pg_rewind, and pg_upgrade).
On Linux, users can specify "syncfs" to synchronize the relevant
file systems instead of calling fsync() for every single file. In
many cases, using syncfs() is much faster.
As with recovery_init_sync_method, this new option comes with some
caveats. The descriptions of these caveats have been moved to a
new appendix section in the documentation.
Co-authored-by: Justin Pryzby
Reviewed-by: Michael Paquier, Thomas Munro, Robert Haas, Justin Pryzby
Discussion: https://postgr.es/m/20210930004340.GM831%40telsasoft.com
This commit adds support for using syncfs() in fsync_pgdata() and
fsync_dir_recurse() (which have been renamed to sync_pgdata() and
sync_dir_recurse()). Like recovery_init_sync_method,
sync_pgdata() calls syncfs() for the data directory, each
tablespace, and pg_wal (if it is a symlink). For now, all of the
frontend utilities that use these support functions are hard-coded
to use fsync(), but a follow-up commit will allow specifying
syncfs().
Co-authored-by: Justin Pryzby
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/20210930004340.GM831%40telsasoft.com
Presently, frontend code that needs to use these macros must either
include storage/fd.h, which declares several frontend-unsafe
functions, or duplicate the macros. This commit moves these macros
to common/file_utils.h, which is safe for both frontend and backend
code. Consequently, we can also remove the duplicated macros in
pg_checksums and stop including storage/fd.h in pg_rewind.
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/ZOP5qoUualu5xl2Z%40paquier.xyz
Previously when client was aborted due to some error during
benchmarking, other clients continued their run until certain number
of transactions specified -t was reached or the time specified by -T
was expired. At the end, the results are printed with caution: "Run
was aborted; the above results are incomplete" shows.
New option "--exit-on-abort" allows pgbench to exit immediately in
this case so that users could quickly fix the cause of the failure and
try again another round of benchmarking.
Author: Yugo Nagata
Reviewed-by: Fabien COELHO, Tatsuo Ishii
Discussion: https://postgr.es/m/flat/20230804130325.df32e60879c38c92bca64207%40sraoss.co.jp
When running a repeat query with \watch in psql, it can be
helpful to be able to stop the watch process when the query
no longer returns the expected amount of rows. An example
would be to watch for the presence of a certain event in
pg_stat_activity and stopping when the event is no longer
present, or to watch an index creation and stop when the
index is created.
This adds a min_rows=MIN parameter to \watch which can be
set to a non-negative integer, and the watch query will
stop executing when it returns less than MIN rows.
Author: Greg Sabino Mullane <htamfids@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/CAKAnmmKStATuddYxP71L+p0DHtp9Rvjze3XRoy0Dyw67VQ45UA@mail.gmail.com
While there are numerous instances of using "power of 2" in the code,
translated user-facing messages use "power of two". Fix two instances
which used "power of 2" instead.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20230829.175615.682972421946735863.horikyota.ntt@gmail.com
Make the primary messages more compact and make the detail messages
uniform. In initdb.c and pg_resetwal.c, use the newish
option_parse_int() to simplify some of the option parsing. For the
backend GUC wal_segment_size, add a GUC check hook to do the
verification instead of coding it in bootstrap.c. This might be
overkill, but that way the check is in the right place and it becomes
more self-documenting.
In passing, make pg_controldata use the logging API for warning
messages.
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Discussion: https://www.postgresql.org/message-id/flat/9939aa8a-d7be-da2c-7715-0a0b5535a1f7@eisentraut.org
We now create contype='n' pg_constraint rows for not-null constraints.
We propagate these constraints to other tables during operations such as
adding inheritance relationships, creating and attaching partitions and
creating tables LIKE other tables. We also spawn not-null constraints
for inheritance child tables when their parents have primary keys.
These related constraints mostly follow the well-known rules of
conislocal and coninhcount that we have for CHECK constraints, with some
adaptations: for example, as opposed to CHECK constraints, we don't
match not-null ones by name when descending a hierarchy to alter it,
instead matching by column name that they apply to. This means we don't
require the constraint names to be identical across a hierarchy.
For now, we omit them for system catalogs. Maybe this is worth
reconsidering. We don't support NOT VALID nor DEFERRABLE clauses
either; these can be added as separate features later (this patch is
already large and complicated enough.)
psql shows these constraints in \d+.
pg_dump requires some ad-hoc hacks, particularly when dumping a primary
key. We now create one "throwaway" not-null constraint for each column
in the PK together with the CREATE TABLE command, and once the PK is
created, all those throwaway constraints are removed. This avoids
having to check each tuple for nullness when the dump restores the
primary key creation.
pg_upgrading from an older release requires a somewhat brittle procedure
to create a constraint state that matches what would be created if the
database were being created fresh in Postgres 17. I have tested all the
scenarios I could think of, and it works correctly as far as I can tell,
but I could have neglected weird cases.
This patch has been very long in the making. The first patch was
written by Bernd Helmle in 2010 to add a new pg_constraint.contype value
('n'), which I (Álvaro) then hijacked in 2011 and 2012, until that one
was killed by the realization that we ought to use contype='c' instead:
manufactured CHECK constraints. However, later SQL standard
development, as well as nonobvious emergent properties of that design
(mostly, failure to distinguish them from "normal" CHECK constraints as
well as the performance implication of having to test the CHECK
expression) led us to reconsider this choice, so now the current
implementation uses contype='n' again. During Postgres 16 this had
already been introduced by commit e056c557ae, but there were some
problems mainly with the pg_upgrade procedure that couldn't be fixed in
reasonable time, so it was reverted.
In 2016 Vitaly Burovoy also worked on this feature[1] but found no
consensus for his proposed approach, which was claimed to be closer to
the letter of the standard, requiring an additional pg_attribute column
to track the OID of the not-null constraint for that column.
[1] https://postgr.es/m/CAKOSWNkN6HSyatuys8xZxzRCR-KL1OkHS5-b9qd9bf1Rad3PLA@mail.gmail.com
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Author: Bernd Helmle <mailings@oopsware.de>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Commit 7b378237aa added a status message to pg_upgrade that is 60
characters wide. Since the MESSAGE_WIDTH macro is currently set to
60, there is no space between this new status message and the "ok"
or "failed" indicator appended when the step completes. To fix
this problem, this commit increases the value of MESSAGE_WIDTH to
62.
Suggested-by: Bharath Rupireddy
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/CALj2ACVVvk1cYLtWVxHv%3DZ1Ubq%3DUES9fhKbUU4c9k4W%2BfEDnbw%40mail.gmail.com
Backpatch-through: 16
The new_cluster parameter in check_for_new_tablespace_dir was
shadowing the globally defined new_cluster variable, causing
compiler warnings when running with -Wshadow. The function is
only applicable to the new cluster, so remove the parameter
rather than rename to match check_new_cluster_is_empty which
also only applies to the new cluster.
Author: Peter Smith <peter.b.smith@fujitsu.com>
Discussion: https://postgr.es/m/CAHut+PvS_PHLntWy1yTgXv0O1tWm4iVcKBQFzpoQRDsm2Ce_Fg@mail.gmail.com
In-place tablespaces would be dumped with the path produced by
pg_tablespace_location(), which is in this case a relative path built as
pg_tblspc/OID, but this would fail to restore as such tablespaces need
to use an empty string as location. In order to detect if an in-place
tablespace is used, this commit checks if the path returned is relative
and adapts the dump contents in consequence.
Like the other changes related to in-place tablespaces, no backpatch is
done as these are only intended for development purposes. Rui Zhao has
fixed the code, while the test is from me.
Author: Rui Zhao, Michael Paquier
Discussion: https://postgr.es/m/80c80b4a-b87b-456f-bd46-1ae326601d79.xiyuan.zr@alibaba-inc.com
If we define ZLIB_CONST before including zlib.h, zlib augments some
interfaces with const decorations. By doing that we can keep our own
interfaces cleaner and can remove some unconstify calls.
ZLIB_CONST was introduced in zlib 1.2.5.2 (17 Dec 2011). When
compiling with older zlib releases, you might now get compiler
warnings about discarding qualifiers.
CentOS 6 has zlib 1.2.3, but in 8e278b6576, we removed support for the
OpenSSL release in CentOS 6, so it seems ok to de-support the zlib
release in CentOS 6 as well.
Reviewed-by: Tristan Partin <tristan@neon.tech>
Discussion: https://www.postgresql.org/message-id/flat/33462926-bb1e-7cc9-8d92-d86318e8ed1d%40eisentraut.org
libpq_source.c would consider any result returned by
pg_tablespace_location() as a symlink, resulting in run-time errors like
that:
pg_rewind: error: file "pg_tblspc/NN" is of different type in source and target
In-place tablespaces are directories located in pg_tblspc/, returned as
relative paths instead of absolute paths, so rely on that to make the
difference with a normal tablespace and an in-place one. If the path is
relative, the tablespace is handled as a directory. If the path is
absolute, consider it as a symlink.
In-place tablespaces are only intended for development purposes, so like
363e8f9 no backpatch is done. A test is added in pg_rewind with an
in-place tablespace and some data in it.
Author: Rui Zhao, Michael Paquier
Discussion: https://postgr.es/m/2b79d2a8-b2d5-4bd7-a15b-31e485100980.xiyuan.zr@alibaba-inc.com
Commits 83dec5a712 and ff402ae11b taught vacuumdb to reuse
passwords instead of prompting repeatedly. However, the docs still
warn about repeated prompts, and this improvement was not applied
to clusterdb and reindexdb. This commit allows clusterdb and
reindexdb to reuse passwords just like vacuumdb does, and it
expunges the aforementioned warnings from the docs.
Reviewed-by: Gurjeet Singh, Zhang Mingli
Discussion: https://postgr.es/m/20230628045741.GA1813397%40nathanxps13
psql's --echo-hidden, --log-file, and --single-step options
generate extra lines to clearly separate queries from other output.
Presently, these extra lines are not valid SQL comments, which
makes them a hazard for anyone trying to copy/paste the decorated
queries into a client or query editor. This commit replaces the
starting and ending asterisks in these extra lines with forward
slashes so that they are valid SQL comments that can be copy/pasted
without incident.
Author: Kirk Wolak
Reviewed-by: Pavel Stehule, Laurenz Albe, Tom Lane, Alvaro Herrera, Andrey Borodin
Discussion: https://postgr.es/m/CACLU5mTFJRJYtbvmZ26txGgmXWQo0hkGhH2o3hEquUPmSbGtBw%40mail.gmail.com
This commit switches the client-side data generation from INSERT queries
to COPY for the two tables pgbench_branches and pgbench_tellers.
pgbench_accounts was already using COPY.
COPY is a better interface for bulk loading or high latency connections
(this point can be countered with the option for server-side data
generation, still client-side is the default), and measurements have
proved that using it for these two other tables can lead to improvements
during initialization. I did not notice slowdowns at large scale
numbers on a local setup, either, most of the work happening for the
accounts table.
Previously COPY was only used for the pgbench_accounts table because the
amount of data was much larger than the two other tables. The code is
refactored so as all three tables use the same code path to execute the
COPY queries, with a callback to build data rows.
Author: Tristan Partin
Discussion: https://postgr.es/m/CSTU5P82ONZ1.19XFUGHMXHBRY@c3po
The tables created by pgbench rely on a few assumptions for TPC-B, where
the "filler" attribute is used to comply with this benchmark's rules as
well as pgbencn historical behavior. The data generated for each table
uses this filler in a different way:
- pgbench_accounts uses it as a blank-padded empty string.
- pgbench_tellers and pgbench_branches use it as a NULL value.
There were no checks done about the consistency of the data initialized,
and this has showed up while discussing a patch that changes the logic
in charge of the client-side data generation (pgbench documents all that
already in its comments). This commit adds some checks on the data
generated for both the server-side and client-side logic.
Reviewed-by: Tristan Partin
Discussion: https://postgr.es/m/ZLik4oKnqRmVCM3t@paquier.xyz
When the cluster failed the pg_controldata check for clean shut
down we only reported that it did so, not why. The state of the
cluster can be important information when diagnosing the failed
upgrade attempt, so instead include it in the error message.
Discussion: https://postgr.es/m/E0D5EA16-A085-4753-8DDC-C7055048B439@yesql.se
When pg_recvlogical needs to abort on a signal like SIGINT/SIGTERM, it
is expected to exit cleanly as the code documents. However, the code
forgot to clean up the state of the connection before leaving. This
would cause the tool to emit messages like "unexpected termination of
replication stream" error, which is meant for really unexpected
termination or a crash.
The code is refactored to apply the same termination abort operations for
signals, end LSN and keepalive cases, registering a "reason" for the
termination with a message printed under --verbose adapted to the reason
used.
This is arguably a bug, but this has been this way since the tool exists
and the signal termination can now become slower depending on the change
being decoded when the signal is received.
Reported-by: Andres Freund
Author: Bharath Rupireddy
Reviewed-by: Andres Freund, Kyotaro Horiguchi, Cary Huang, Michael
Paquier
Discussion: https://postgr.es/m/20221019213953.htdtzikf4f45ywil@awork3.anarazel.de
With the addition of INHERIT and SET options for role grants,
the historical display of role memberships in \du/\dg is woefully
inadequate. Besides those options, there are pre-existing
shortcomings that you can't see the ADMIN option nor the grantor.
To fix this, remove the "Member of" column from \du/\dg altogether
(making that output usefully narrower), and invent a new meta-command
"\drg" that is specifically for displaying role memberships. It
shows one row for each role granted to the selected role(s), with
the grant options and grantor.
We would not normally back-patch such a feature addition post
feature freeze, but in this case the change is mainly driven by
v16 changes in the server, so it seems appropriate to include it
in v16.
Pavel Luzanov, with bikeshedding and review from a lot of people,
but particularly David Johnston
Discussion: https://postgr.es/m/b9be2d0e-a9bc-0a30-492f-a4f68e4f7740@postgrespro.ru
By default, pg_archivecleanup does not remove backup history files.
These are just few bytes useful for debugging purposes, still keeping
them around can bloat an archive path history files mixed with the WAL
segments if the path has a long history.
This patch adds a new option to control if backup history files are
removed, depending on the oldest segment name to keep around.
While on it, the TAP tests are refactored so as these are now able to
handle lists of files. Each file has a flag to track if it should still
exist or not depending on the oldest segment defined with the command
run.
Author: Atsushi Torikoshi
Reviewed-by: Kyotaro Horiguchi, Fujii Masao, Michael Paquier
Discussion: https://postgr.es/m/d660ef741ce3d82f3b4283f1cafd576c@oss.nttdata.com
This commit refactors a bit the main loop of pg_archivecleanup that
handles the removal of old segments, reducing by one its level of
indentation. This will help an incoming patch that adds a new option
related to the segment filtering logic.
Author: Atsushi Torikoshi
Reviewed-by: Kyotaro Horiguchi, Fujii Masao, Michael Paquier
Discussion: https://postgr.es/m/d660ef741ce3d82f3b4283f1cafd576c@oss.nttdata.com
Now that the in-tree getopt_long() moves non-options to the end of
argv (see commit 411b720343), we can remove pg_ctl's workaround for
getopt_long() implementations that don't reorder argv.
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/20230713034903.GA991765%40nathanxps13
The "fsync" level already flushes drive write caches on Windows (as does
"fdatasync"), so it only confuses matters to have an apparently higher
level that isn't actually different at all.
That leaves "fsync_writethrough" only for macOS, where it actually does
something different.
Reviewed-by: Magnus Hagander <magnus@hagander.net>
Discussion: https://postgr.es/m/CA%2BhUKGJ2CG2SouPv2mca2WCTOJxYumvBARRcKPraFMB6GSEMcA%40mail.gmail.com
Until now, when DROP DATABASE got interrupted in the wrong moment, the removal
of the pg_database row would also roll back, even though some irreversible
steps have already been taken. E.g. DropDatabaseBuffers() might have thrown
out dirty buffers, or files could have been unlinked. But we continued to
allow connections to such a corrupted database.
To fix this, mark databases invalid with an in-place update, just before
starting to perform irreversible steps. As we can't add a new column in the
back branches, we use pg_database.datconnlimit = -2 for this purpose.
An invalid database cannot be connected to anymore, but can still be
dropped.
Unfortunately we can't easily add output to psql's \l to indicate that some
database is invalid, it doesn't fit in any of the existing columns.
Add tests verifying that a interrupted DROP DATABASE is handled correctly in
the backend and in various tools.
Reported-by: Evgeny Morozov <postgresql3@realityexists.net>
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20230509004637.cgvmfwrbht7xm7p6@awork3.anarazel.de
Discussion: https://postgr.es/m/20230314174521.74jl6ffqsee5mtug@awork3.anarazel.de
Backpatch: 11-, bug present in all supported versions
Unlike the other implementations of getopt_long() I could find, the
in-tree implementation does not reorder non-options to the end of
argv. Instead, it returns -1 as soon as the first non-option is
found, even if there are other options listed afterwards. By
moving non-options to the end of argv, getopt_long() can parse all
specified options and return -1 when only non-options remain.
This quirk is periodically missed by hackers (e.g., 869aa40a27,
ffd398021c, and d9ddc50baf). This commit introduces the
aforementioned non-option reordering behavior to the in-tree
getopt_long() implementation.
Special thanks to Noah Misch for his help verifying behavior on
AIX.
Reviewed-by: Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/20230609232257.GA121461%40nathanxps13
All supported computers have either POSIX or Windows threads, and we no
longer have any automated testing of --disable-thread-safety. We define
a vestigial ENABLE_THREAD_SAFETY macro to 1 in ecpg_config.h in case it
is useful, but we no longer test it anywhere in PostgreSQL code, and
associated dead code paths are removed.
The Meson and perl-based Windows build scripts never had an equivalent
build option.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/CA%2BhUKGLtmexrpMtxBRLCVePqV_dtWG-ZsEbyPrYc%2BNBB2TkNsw%40mail.gmail.com
As coded, the row data strings generated for pgbench_accounts' COPY in
the client-side data generation were always assigning 0 for one of its
attributes. This simplifies a bit an upcoming patch to switch
client-side data generation of pgbench to use COPY for the teller and
branch tables, rather than individual INSERTs.
Author: Tristan Partin
Discussion: https://postgr.es/m/CSTU5P82ONZ1.19XFUGHMXHBRY@c3po
Historically this module dealt with thread-safety of system interfaces,
but now all that's left is wrapper code for user name and home directory
lookup. Arguably the Windows variants of this logic could be moved in
here too, to justify its presence under port. For now, just tidy up
some obsolete references to multi-threading, and give the file a
meaningful name.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/CA%2BhUKGLtmexrpMtxBRLCVePqV_dtWG-ZsEbyPrYc%2BNBB2TkNsw%40mail.gmail.com
Commit e213de8e78 fixed a problem with path lengths to a tempdir on
Windows, but caused problems on at least some Unix systems where the
system tempdir is on a different file system. To work around this, only
used the system temdir for the destination of pg_replslot on Windows,
and otherwise restore the old behaviour.
Backpatch to relase 14 like the previous patch.
Problem exposed by a myriad of buildfarm animals.
The symlink to a longer location tripped up some Windows limit on
buildfarm animal fairywren when running with meson, which uses slightly
longer paths.
Backpatch to release 14 to keep the script in sync. Before that the
script skipped all symlink related tests on Windows.
On Windows, it's sometimes difficult to create a file with a path longer
than 255 chars, and if it can be created it might not be seen by the
archiver. This can be triggered by the test for tar backups with
filenames greater than 100 bytes. So we skip that test if the path would
exceed 255.
Backpatch to all live branches.
Reviewed by Daniel Gustafsson
Discussion: https://postgr.es/m/666ac55b-3400-fb2c-2cea-0281bf36a53c@dunslane.net
This commit comes as a continuation of the discussion that has led to
d522b05, as \v was handled inconsistently when parsing array values or
anything going through the parsers, and changing a parser behavior in
stable branches is a scary thing to do. The parsing of array values now
uses the more central scanner_isspace() and array_isspace() is removed.
As pointing out by Peter Eisentraut, fix a confusing reference to
horizontal space in the parsers with the term "horiz_space". \f was
included in this set since 3cfdd8f from 2000, but it is not horizontal.
"horiz_space" is renamed to "non_newline_space", to refer to all
whitespace characters except newlines.
The changes impact the parsers for the backend, psql, seg, cube, ecpg
and replication commands. Note that JSON should not escape \v, as per
RFC 7159, so these are not touched.
Reviewed-by: Peter Eisentraut, Tom Lane
Discussion: https://postgr.es/m/ZJKcjNwWHHvw9ksQ@paquier.xyz
Several commands internally assemble command lines to call other
commands. This includes initdb, pg_dumpall, and pg_regress. (Also
pg_ctl, but that is different enough that I didn't consider it here.)
This has all evolved a bit organically, with fixed-size buffers, and
various optional command-line arguments being injected with
confusing-looking code, and the spacing between options handled in
inconsistent ways. Clean all this up a bit to look clearer and be
more easily extensible with new arguments and options. We start each
command with printfPQExpBuffer(), and then append arguments as
necessary with appendPQExpBuffer(). Also standardize on using
initPQExpBuffer() over createPQExpBuffer() where possible. pg_regress
uses StringInfo instead of PQExpBuffer, but many of the same ideas
apply.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://www.postgresql.org/message-id/flat/16d0beac-a141-e5d3-60e9-323da75f49bf@eisentraut.org
Creation of a file with a very long name can create problems on Windows
due to its file path limits. Work around that by creating the file via a
symlink with a shorter name.
Error displayed by buildfarm animal fairywren.o
Backpatch to all live branches
This patch is a preliminary refactoring for an upcoming patch aimed at
adding new options to this tool, and using long options for these is
more user-friendly. The existing short options gain long flavors, as
of:
* -d/--debug
* -n/--dry-run
* -x/--strip-extension
Author: Atsushi Torikoshi
Reviewed-by: Fujii Masao, Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/d660ef741ce3d82f3b4283f1cafd576c@oss.nttdata.com
The following patterns are added for CREATE SCHEMA:
- AUTHORIZATION, without a schema name or after a schema name.
- Possible list of owner roles after AUTHORIZATION.
- CREATE and GRANT within the supported set of commands.
- Correct object types supported in an embedded CREATE SCHEMA command.
While on it, this commit adjusts the completion done after CREATE
UNLOGGED:
- Addition of SEQUENCE.
- Avoid suggesting MATERIALIZED VIEW in CREATE TABLE.
Author: Dagfinn Ilmari Mannsåker
Reviewed-by: Suraj Khamkar, Michael Paquier
Discussion: https://postgr.es/m/8735snihmz.fsf@wibble.ilmari.org
Not including the timeline IDs to the file names generated by pg_waldump
for the individual blocks saved could cause some of these files to be
overwritten when scanning segments across multiple timelines. Having
this information is also as much useful as the LSNs, to be able to know
from exactly which WAL segment a block is comes from.
While on it, this fixes a few comments in the tests, where the format of
the file was not described as matching with the reality.
Reported-by: Fujii Masao
Reviewed-by: Kyotaro Horiguchi, David Christensen
Discussion: https://postgr.es/m/ZJp921+nITFnvBVS@paquier.xyz
Run pgindent and pgperltidy. It seems we're still some ways
away from all committers doing this automatically. Now that
we have a buildfarm animal that will whine about poorly-indented
code, we'll try to keep the tree more tidy.
Discussion: https://postgr.es/m/3156045.1687208823@sss.pgh.pa.us
For CREATE DATABASE, make LOCALE parameter apply regardless of the
provider used. Also affects initdb and createdb --locale arguments.
Previously, LOCALE (and --locale) only affected the database default
collation when using the libc provider.
Discussion: https://postgr.es/m/1a63084d-221e-4075-619e-6b3e590f673e@enterprisedb.com
Reviewed-by: Peter Eisentraut
While executing maintenance operations (ANALYZE, CLUSTER, REFRESH
MATERIALIZED VIEW, REINDEX, or VACUUM), set search_path to
'pg_catalog, pg_temp' to prevent inconsistent behavior.
Functions that are used for functional indexes, in index expressions,
or in materialized views and depend on a different search path must be
declared with CREATE FUNCTION ... SET search_path='...'.
This change addresses a security risk introduced in commit 60684dd834,
where a role with MAINTAIN privileges on a table may be able to
escalate privileges to the table owner. That commit is not yet part of
any release, so no need to backpatch.
Discussion: https://postgr.es/m/e44327179e5c9015c8dda67351c04da552066017.camel%40j-davis.com
Reviewed-by: Greg Stark
Reviewed-by: Nathan Bossart
A new-style SQL function can contain a parse-time dependency
on a unique index, much as views and matviews can (such cases
arise from GROUP BY and ON CONFLICT clauses, for example).
To dump and restore such a function successfully, pg_dump must
postpone the function until after the unique index is created,
which will happen in the post-data part of the dump. Therefore
we have to remove the normal constraint that functions are
dumped in pre-data. Add code similar to the existing logic
that handles this for matviews. I added test cases for both
as well, since code coverage tests showed that we weren't
testing the matview logic.
Per report from Sami Imseih. Back-patch to v14 where
new-style SQL functions came in.
Discussion: https://postgr.es/m/2C1933AB-C2F8-499B-9D18-4AC1882256A0@amazon.com
Two places in pg_dump_sort.c were using pg_log_info() to add
more details to a message printed with pg_log_warning().
This is bad, because at default verbosity level we would
print the warning line but not the details. One should use
pg_log_warning_detail() or pg_log_warning_hint() instead.
Commit 9a374b77f got rid of most such abuses, but unaccountably
missed these.
Noted while studying a bug report from Sami Imseih.
Back-patch to v15 where 9a374b77f came in. (Prior versions
don't have the missing-details misbehavior, for reasons
I didn't bother to track down.)
Discussion: https://postgr.es/m/2C1933AB-C2F8-499B-9D18-4AC1882256A0@amazon.com
2dcd1578c4 left the --role option undocumented, which is
inconsistent with other deprecated options such as pg_dump's
--blobs and --no-blobs. This change adds --role back to
createuser's documentation and usage output and marks it as
deprecated.
Suggested-by: Peter Eisentraut
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/0e85c9e7-4804-1cdb-5a4a-c72c328f9ad8%40enterprisedb.com
This change renames --admin to --with-admin, --role to --member-of,
and --member to --with-member. Many people found the previous
names to be confusing. The --admin and --member options are new in
v16, but --role has been there for a while, so that one has been
kept (but left undocumented) for backward compatibility.
Suggested-by: Peter Eisentraut
Reviewed-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/ZFvVZvQDliIWmOwg%40momjian.us
Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/20230428092545.qfb3y5wcu4cm75ur@alvherre.pgsql
Fixes memory error in cases where the length of the language name
returned by uloc_getLanguage() is exactly ULOC_LANG_CAPACITY, in which
case the status is set to U_STRING_NOT_TERMINATED_WARNING.
Also check in call sites for other ICU functions that are expected to
return a C string to be safe (no bug is known at these other call
sites).
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/2098874d-c111-41e4-9063-30bcf135226b@gmail.com
LZ4File_write() did not advance the input pointer on subsequent invocations of
LZ4F_compressUpdate(). As a result the generated compressed output would be a
compressed version of the same input chunk.
Tests failed to catch this error because the data would comfortably fit
within the default buffer size, as a single chunk. Tests have been added
to provide adequate coverage of multi-chunk compression.
WriteDataToArchiveLZ4() which is also using LZ4F_compressUpdate() did
not suffer from this omission.
Author: Georgios Kokolatos <gkokolatos@pm.me>
Reported-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/ZFhCyn4Gm2eu60rB%40paquier.xyz
LZ4Stream_gets did not null-terminate its output buffer. The callers expected
the buffer to be null-terminated and passed it around to functions such as
sscanf with unintended consequences.
Author: Georgios Kokolatos <gkokolatos@pm.me>
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/94ae9bca-5ebb-1e68-bb7b-4f32e89fefbe@gmail.com
Using a test function before a possible skip_all is incorrect. If the
skip_all is called, the test output will become incorrect and the test
file will fail.
a4f23f9b3c introduced a new test before skip_all. After discussion,
this doesn't really need to be a test. Instead, we just bail out if
the condition is not satisfied.
Discussion: https://www.postgresql.org/message-id/af5567a1-aea6-fbdb-7e4b-d1e23a43c43b@enterprisedb.com
Don't use PSQL_WATCH_PAGER when stdin/stdout are not a terminal.
This corresponds to the restrictions on when other commands will
use [PSQL_]PAGER. There isn't a lot of sense in trying to use a
pager in non-interactive cases, and doing so allows an environment
setting to break our tests.
Also, ignore PSQL_WATCH_PAGER if it is set but empty or all-blank,
for the same reasons we ignore such settings of [PSQL_]PAGER (see
commit 18f8f784c).
No documentation change is really needed, since there is nothing
suggesting that these constraints on [PSQL_]PAGER didn't already
apply to PSQL_WATCH_PAGER too. But I rearranged the text
a little to make it read more naturally (IMHO anyway).
Per report from Pavel Stehule. Back-patch to v15 where
PSQL_WATCH_PAGER was introduced.
Discussion: https://postgr.es/m/CAFj8pRDTwFzmEWdA-gdAcUh0ZnxUioSfTMre71WyB_wNJy-8gw@mail.gmail.com
Since the behavior of the UNICODE collation can change with new
ICU/Unicode versions, we need to apply the versioning mechanism to it.
We do this with an UPDATE command in initdb; this is similar to how we
put the collation version into pg_database already.
Reported-by: Daniel Verite <daniel@manitou-mail.org>
Discussion: https://www.postgresql.org/message-id/49417853-7bdd-4b23-a4e9-04c7aff33821@manitou-mail.org
The <source>_traverse_files functions take a callback for processing
files, but both the local and libpq source implementations called the
function directly without using the callback argument. While there is
no bug right now as the function called is the same as the callback,
fix by calling the callback to reduce the risk of subtle bugs in the
future.
Author: Junwang Zhao <zhjwpku@gmail.com>
Reviewed-by: Richard Guo <guofenglinux@gmail.com>
Discussion: https://postgr.es/m/CAEG8a3Jdwgh+PZr2zh1=t8apA4Yz8tKq+uubPqoCt14nvWKHEw@mail.gmail.com
As written, pg_dump would call twice parse_compress_specification() for
the custom and directory formats to build a compression specification if
no compression option is defined, as these formats should be compressed
by default when compiled with zlib, or use no compression without zlib.
This made the code logic quite confusing, and the first compression
specification built would be incorrect before being overwritten by the
second one.
Rather than creating two compression specifications, this commit changes
a bit the order of the checks for the compression options so as
compression_algorithm_str is now set to a correct value for the custom
and format directory when no compression option is defined. This makes
the code easier to understand, as parse_compress_specification() is now
called once for all the format, with or without user-specified
compression methods. One comment was also confusing for the non-zlib
case, so remove it while on it.
This code has been introduced in 5e73a60 when adding support for
compression specifications in pg_dump.
Per discussion with Justin Pryzby and Georgios Kokolatos.
Discussion: https://postgr.es/m/20230225050214.GH1653@telsasoft.com
Commit ce6b672e44 changed dumping GRANT commands to ensure that
grantors already have an ADMIN OPTION on the role for which it
is granting permissions. Looping over the grants per role has a
stop condition on dumping the grant statements, but accidentally
missed updating the variable for the conditional check.
Author: Andreas Scherbaum <ads@pgug.de>
Co-authored-by: Artur Zakirov <zaartur@gmail.com>
Discussion: https://postgr.es/m/de44299d-cd31-b41f-2c2a-161fa5e586a5@pgug.de
vacuum_defer_cleanup_age was introduced before hot_standby_feedback and
replication slots existed. It is hard to use reasonably - commonly it will
either be set too low (not preventing recovery conflicts, while still causing
some bloat), or too high (causing a lot of bloat). The alternatives do not
have that issue.
That on its own might not be sufficient reason to remove
vacuum_defer_cleanup_age, but it also complicates computation of xid
horizons. See e.g. the bug fixed in be504a3e97. It also is untested.
This commit removes TransactionIdRetreatSafely(), as there are no users
anymore. There might be potential future users, hence noting that here.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20230317230930.nhsgk3qfk7f4axls@awork3.anarazel.de
Commit c6f2f01611 purported to make
this work, but problems remained. In a plain-format backup, the
files from an in-place tablespace got included in the tar file for
the main tablespace, which is wrong but it's not clear that it
has any user-visible consequences. In a tar-format backup, the
TABLESPACE_MAP option is used, and so we never iterated over
pg_tblspc and thus never backed up the in-place tablespaces
anywhere at all.
To fix this, reverse the changes in that commit, so that when we scan
pg_tblspc during a backup, we create tablespaceinfo objects even for
in-place tablespaces. We set the field that would normally contain the
absolute pathname to the relative path pg_tblspc/${TSOID}, and that's
good enough to make basebackup.c happy without any further changes.
However, pg_basebackup needs a couple of adjustments to make it work.
First, it needs to understand that a relative path for a tablespace
means it's an in-place tablespace. Second, it needs to tolerate the
situation where restoring the main tablespace tries to create
pg_tblspc or a subdirectory and finds that it already exists, because
we restore user-defined tablespaces before the main tablespace.
Since in-place tablespaces are only intended for use in development
and testing, no back-patch.
Patch by me, reviewed by Thomas Munro and Michael Paquier.
Discussion: http://postgr.es/m/CA+TgmobwvbEp+fLq2PykMYzizcvuNv0a7gPMJtxOTMOuuRLMHg@mail.gmail.com
This fixes many spelling mistakes in comments, but a few references to
invalid parameter names, function names and option names too in comments
and also some in string constants
Also, fix an #undef that was undefining the incorrect definition
Author: Alexander Lakhin
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/d5f68d19-c0fc-91a9-118d-7c6a5a3f5fad@gmail.com
We have two existing conventions for long options: either alphabetical
among short options, or all long options after all the short options.
But the convention apparently used here, next to a functionally
related option, is not one of them.
Bruce Momjian
Tom Lane
Alexander Korotkov
Amit Kapila
Peter Eisentraut
Nathan Bossart
Michael Paquier
Noah Misch
Alvaro Herrera
Heikki Linnakangas
Andres Freund
Daniel Gustafsson
David Rowley
Tatsuo Ishii
Jeff Davis
Robert Haas
Thomas Munro
Andrew Dunstan
Masahiko Sawada
Tomas Vondra