interpret a column name as an output column alias (targetlist AS name),
ather than a real column name as it ought to. According to the spec,
only ORDER BY should look at output column names. I left in GROUP BY's
willingness to use an output column number ('GROUP BY 2'), even though
this is also contrary to the spec --- again, only ORDER BY is supposed
to accept that. But there is no possible reason to want to GROUP BY
an integer constant, so keeping this old behavior won't break any
SQL-compliant queries. DISTINCT ON will behave the same as GROUP BY.
Change numerology regress test, which depended on the incorrect
behavior.
erroneous expected output for RESET DateStyle: should be ISO now.
Fix run_check.sh so that test postmaster is started with PGDATESTYLE=ISO,
else the horology test won't pass.
variable, instead calling same code in variable.c that is used to parse
SET DATESTYLE. Fix bug: although backend's startup datestyle had been
changed to ISO, 'RESET DATESTYLE' and 'SET DATESTYLE TO DEFAULT' didn't
know about it. For consistency I have made the latter two reset to the
PGDATESTYLE-defined initial value, which may not be the same as the
compiled-in default of ISO.
equivalent now, which should make Windows and Mac clients happier.
Also fix failure to handle SQL comments between segments of a multiline
quoted literal.
appropriate btree three-way comparison routine. Not clear why the
three-way comparison routines were being used in some paths and not
others in btree --- incomplete changes by someone long ago, maybe?
Anyway, this makes for a nice speedup in CREATE INDEX.
selectivity functions and make the r-tree operators use them. The
estimation functions themselves are just stubs, unfortunately, but
perhaps someday someone will make them compute realistic estimates.
Change pg_am so that the optimizer can reliably tell the difference
between ordered and unordered indexes --- before it would think that
an r-tree index can be scanned in '<<' order, which is not right AFAIK.
Repair broken negator links for network_sup and related ops.
Initdb forced. This might be my last initdb force for 7.0 ... hope so
anyway ...
Version: 6.5.3-11
Severity: important
'char' is not a signed type by default on powerpc; therefore a character
can
never be equal to EOF (-1). A patch is attached.
Dan
/--------------------------------\ /--------------------------------\
| Daniel Jacobowitz |__| SCS Class of 2002 |
Implement "date/time grand unification".
Transform datetime and timespan into timestamp and interval.
Deprecate datetime and timespan, though translate to new types in gram.y.
Transform all datetime and timespan catalog entries into new types.
Make "INTERVAL" reserved word allowed as a column identifier in gram.y.
Remove dt.h, dt.c files, and retarget datetime.h, datetime.c as utility
routines for all date/time types.
date.{h,c} now deals with date, time types.
timestamp.{h,c} now deals with timestamp, interval types.
nabstime.{h,c} now deals with abstime, reltime, tinterval types.
Make NUMERIC a known native type for purposes of type coersion. Not tested.
Implement "date/time grand unification".
Transform datetime and timespan into timestamp and interval.
Deprecate datetime and timespan, though translate to new types in gram.y.
Transform all datetime and timespan catalog entries into new types.
Make "INTERVAL" reserved word allowed as a column identifier in gram.y.
Remove dt.h, dt.c files, and retarget datetime.h, datetime.c as utility
routines for all date/time types.
date.{h,c} now deals with date, time types.
timestamp.{h,c} now deals with timestamp, interval types.
nabstime.{h,c} now deals with abstime, reltime, tinterval types.
Make NUMERIC a known native type for purposes of type coersion. Not tested.
Transform datetime and timespan into timestamp and interval.
Deprecate datetime and timespan, though translate to new types in gram.y.
Transform all datetime and timespan catalog entries into new types.
Make "INTERVAL" reserved word allowed as a column identifier in gram.y.
Remove dt.h, dt.c files, and retarget datetime.h, datetime.c as utility
routines for all date/time types.
date.{h,c} now deals with date, time types.
timestamp.{h,c} now deals with timestamp, interval types.
nabstime.{h,c} now deals with abstime, reltime, tinterval types.
Make NUMERIC a known native type for purposes of type coersion. Not tested.
Implement "date/time grand unification".
Transform datetime and timespan into timestamp and interval.
Deprecate datetime and timespan, though translate to new types in gram.y.
Transform all datetime and timespan catalog entries into new types.
Make "INTERVAL" reserved word allowed as a column identifier in gram.y.
Remove dt.h, dt.c files, and retarget datetime.h, datetime.c as utility
routines for all date/time types.
date.{h,c} now deals with date, time types.
timestamp.{h,c} now deals with timestamp, interval types.
nabstime.{h,c} now deals with abstime, reltime, tinterval types.
Make NUMERIC a known native type for purposes of type coersion. Not tested.
accesses versus sequential accesses, a (very crude) estimate of the
effects of caching on random page accesses, and cost to evaluate WHERE-
clause expressions. Export critical parameters for this model as SET
variables. Also, create SET variables for the planner's enable flags
(enable_seqscan, enable_indexscan, etc) so that these can be controlled
more conveniently than via PGOPTIONS.
Planner now estimates both startup cost (cost before retrieving
first tuple) and total cost of each path, so it can optimize queries
with LIMIT on a reasonable basis by interpolating between these costs.
Same facility is a win for EXISTS(...) subqueries and some other cases.
Redesign pathkey representation to achieve a major speedup in planning
(I saw as much as 5X on a 10-way join); also minor changes in planner
to reduce memory consumption by recycling discarded Path nodes and
not constructing unnecessary lists.
Minor cleanups to display more-plausible costs in some cases in
EXPLAIN output.
Initdb forced by change in interface to index cost estimation
functions.
SELECT a FROM t1 tx (a);
Allow join syntax, including queries like
SELECT * FROM t1 NATURAL JOIN t2;
Update RTE structure to hold column aliases in an Attr structure.
Add "SESSION_USER" as SQL92 keyword; equivalent to CURRENT_USER for now.
Implement column aliases (aka correlation names) and more join syntax.
Fix up indenting and tabbing.
where else to mail it. I am the maintainer of unixODBC, and we have a
set of code in our project that started life as the Postgres windows
ODBC driver, which has been ported back to unix. Anyway I have just
fixed a memory leak in the driver, and I cant see any mention of the fix
being done in the main Postgres code, so I thougth I would let you know.
Its in the statement.c module, after the COMMIT statement has been
executed in SC_Execute, the code was
Nick Gorham
this is an old patch which I have already submitted and never seen
in the sources. It corrects the datatype oids used in some iterator
functions. This bug has been reported to me by many other people.
contrib-datetime.patch
some code contributed by Reiner Dassing <dassing@wettzell.ifag.de>
contrib-makefiles.patch
fixes all my contrib makefiles which don't work with some compilers,
as reported to me by another user.
contrib-miscutil.patch
an old patch for one of my old contribs.
contrib-string.patch
a small change to the c-like text output functions. Now the '{'
is escaped only at the beginning of the string to distinguish it
from arrays, and the '}' is no more escaped.
elog-lineno.patch
adds the current lineno of CopyFrom to elog messages. This is very
useful when you load a 1 million tuples table from an external file
and there is a bad value somehere. Currently you get an error message
but you can't know where is the bad data. The patch uses a variable
which was declared static in copy.c. The variable is now exported
and initialized to 0. It is always cleared at the end of the copy
or at the first elog message or when the copy is canceled.
I know this is very ugly but I can't find any better way of knowing
where the copy fails and I have this problem quite often.
plperl-makefile.patch
fixes a typo in a makefile, but the error must be elsewhere because
it is a file generated automatically. Please have a look.
tprintf-timestamp.patch
restores the original 2-digit year format, assuming that the two
century digits don't carry much information and that '000202' is
easier to read than 20000202. Being only a log file it shouldn't
break anything.
Please apply the patches before the next scheduled code freeze.
I also noticed that some of the contribs don't compile correcly. Should we
ask people to fix their code or rename their makefiles so that they are
ignored by the top makefile?
--
Massimo Dal Zotto
a switch statement that has an empty default label. A label of a
switch statement must be followed by a statement (or a label which
is followed by a statement (or a label which ...)).
3. Files include stringinfo.h failed to compile. The macro,
'appendStringInfoCharMacro' is implemented with a '?:' operation
that returns a void expression for the true part and a char expresion
for the false part. Both the true and false parts of the '?:' oper-
ator must return the same type.
Billy G. Allie
am including a patch to get it compile.
changes to psql:
- added less as default pager when compiling on Cygwin
- need to declare "filename_completion_function" because it is not exported
from readline -> added to include/port/win.h
changes to pg_id:
- include of <getopt.h>
- add .exe when installing
I think there is a problem with calling the regress tests on WinNT - it
should be called with PORTNAME not HOST as the parameter to regress.sh or
the check when to add "-h localhost" to psql has to be changed. Now it is
checked against the PORTNAME.
The results of the regress tests were OK with expected failures ;-)
Daniel Horak
and initdb crashs (I set pglib path to PG 6.5.3 directory instead to
7.0 and initdb take this BKI old templates ... (initdb not check
BKI version and BKI files not has any version comments (TODO?))
This patch add to the initdb --show option which show setting of all
initdb's values. It spare developers time if in setting is bug.
Karel
----------------------------------------------------------------------
Karel Zak <zakkr@zf.jcu.cz> http://home.zf.jcu.cz/~zakkr/
The PostgreSQL's to_char() is very compatible with Oracle's to_char
now. I hope that to_char's 3000 rows of source is without bugs, but
will good if anyone test it, for me it works very well :-)
Karel
----------------------------------------------------------------------
Karel Zak <zakkr@zf.jcu.cz> http://home.zf.jcu.cz/~zakkr/
fields in JoinPaths --- turns out that we do need that after all :-(.
Also, rearrange planner so that only one RelOptInfo is created for a
particular set of joined base relations, no matter how many different
subsets of relations it can be created from. This saves memory and
processing time compared to the old method of making a bunch of RelOptInfos
and then removing the duplicates. Clean up the jointree iteration logic;
not sure if it's better, but I sure find it more readable and plausible
now, particularly for the case of 'bushy plans'.
regression tests so I prepared a set of expected
files to make things look OK.
There's also a file to account for minor variations
in the geopmetry output and a resultmap patch to
pull them all together.
With these changes PostgreSQL, from CVS, builds and
regression tests (runcheck) cleanly.
Keith Parks.
nonoverlap_sets() and is_subset() to list.c, where they should have lived
to begin with, and rename to nonoverlap_setsi and is_subseti since they
only work on integer lists.
extracting from an AND subclause just those opclauses that are relevant
for a particular index. For example, we can now consider using an index
on x to process WHERE (x = 1 AND y = 2) OR (x = 2 AND y = 4) OR ...
it seems more suitable for the naming convention in libpq.
New function PQsetClientEncoding added. It makes possible to change
the client encoding on the fly without setting PGCLIENTENCODING.
Added constraint dumping capability to pg_dump (also from Stephan)
Fixed DROP TABLE -> RelationBuildTriggers: 2 record(s) not found for rel
error.
Fixed little error in gram.y I made the last days.
Jan
the cache context, it didn't bother to free the tuple that
CatalogIndexFetchTuple had allocated in the transaction context.
Do enough cache lookups in the same xact, and you start to notice...
syscache and relcache flushes). Relcache entry rebuild now preserves
original tupledesc, rewrite rules, and triggers if possible, so that pointers
to these things remain valid --- if these things change while relcache entry
has positive refcount, we elog(ERROR) to avoid later crash. Arrange for
xact-local rels to be rebuilt when an SI inval message is seen for them,
so that they are updated by CommandCounterIncrement the same as regular rels.
(This is useful because of Hiroshi's recent changes to process our own SI
messages at CommandCounterIncrement time.) This allows simplification of
some routines that previously hacked around the lack of an automatic update.
catcache now keeps its own copy of tupledesc for its relation, rather than
depending on the relcache's copy; this avoids needing to reinitialize catcache
during a cache flush, which saves some cycles and eliminates nasty circularity
problems that occur if a cache flush happens while trying to initialize a
catcache.
Eliminate a number of permanent memory leaks that used to happen during
catcache or relcache flush; not least of which was that catcache never
freed any cached tuples! (Rule parsetree storage is still leaked, however;
will fix that separately.)
Nothing done yet about code that uses tuples retrieved by SearchSysCache
for longer than is safe.
we *always* rebuild, rather than deleting, an invalidated relcache entry
that has positive refcount. Otherwise an SI cache overrun leads to
dangling Relation pointers all over the place!
Initdb help correction
Changed end/abort to commit/rollback and changed related notices
Commented out way old printing functions in libpq
Fixed a typo in alter table / alter column
3 new files and two patches for the plperl subdir.
These changes add the ability for plperl functions
to call 'elog'. It also sets up the frame work to
allow me to add access to the SPI functions.
--
Mark Hollomon
2-Oct-98 or TODO.detail/cnfify) to decide whether we want to reduce
WHERE clause to CNF form, DNF form, or neither. This is a HUGE win.
The heuristic conditions could probably still use a little tweaking to
make sure we don't pick CNF when DNF would be better, or vice versa,
but the risk of exponential explosion in cnfify() is gone. I was able
to run ten-thousand-AND-subclause queries through the planner in a
reasonable amount of time.
SELECT DISTINCT ON (expr [, expr ...]) targetlist ...
and there is a check to make sure that the user didn't specify an ORDER BY
that's incompatible with the DISTINCT operation.
Reimplement nodeUnique and nodeGroup to use the proper datatype-specific
equality function for each column being compared --- they used to do
bitwise comparisons or convert the data to text strings and strcmp().
(To add insult to injury, they'd look up the conversion functions once
for each tuple...) Parse/plan representation of DISTINCT is now a list
of SortClause nodes.
initdb forced by querytree change...
family functions. Contain:
conversion from a datetype to formatted text:
to_char( datetime, text)
to_char( timestamp, text)
to_char( int4, text)
to_char( int8, text)
to_char( float4, text)
to_char( float8, text)
to_char( numeric, text)
vice versa:
to_date ( text, text)
to_datetime ( text, text)
to_timestamp ( text, text)
to_number ( text, text) (convert to numeric)
PostgreSQL to_char is very compatible with Oracle's to_char(), but not
total exactly (now). Small differentions are in number formating. It will
fix in next to_char() version.
! If will this patch aplly to the main tree, must be delete the current
to_char version in contrib (directory "dateformat" and note in contrib's
README), this patch not erase it (sorry Bruce).
The patch patching files:
doc/src/sgml/func.sgml
^^^^^^^^
Hmm, I'm not sure if my English... :( Check it anyone (volunteer)?
Thomas, it is right? SGML is not my primary lang and compile
the current PG docs tree is very happy job (hard variables setting in
docs/sgml/Makefile --> HSTYLE= /home/users/t/thomas/.... :-)
What add any definition to global configure.in and set Makefiles in docs
tree via ./configure?
src/backend/utils/adt/Makefile
src/backend/utils/adt/formatting.c
src/include/catalog/pg_proc.h
src/include/utils/formatting.h
Karel Zak <zakkr@zf.jcu.cz> http://home.zf.jcu.cz/~zakkr/
(ie, WHERE x > lowbound AND x < highbound). It's not very bright yet
but it does something useful. Also, rename intltsel/intgtsel to
scalarltsel/scalargtsel to reflect usage better. Extend convert_to_scalar
to do something a little bit useful with string data types. Still need
to make it do something with date/time datatypes, but I'll wait for
Thomas's datetime unification dust to settle first. Eventually the
routine ought not have any type-specific knowledge at all; it ought to
be calling a type-dependent routine found via a pg_type column; but
that's a task for another day.
an attribute of a tuple previously fetched with SearchSysCacheTuple.
This avoids a lot of redundant cache lookups, particularly in selfuncs.c.
Also, remove SearchSysCacheStruct, which was unused and grotty.
pghackers discussion of 5-Jan-2000. The amopselect and amopnpages
estimators are gone, and in their place is a per-AM amcostestimate
procedure (linked to from pg_am, not pg_amop).
have the rl_completion_append_character variable. The tab completion
behavior doesn't seem to be quite perfect in that situation, but it's
better than failing to build at all...
does not end with a newline. I don't think this explains the recent
complaints, since this bug existed in 6.5 (and probably long before).
But might as well fix it now that I see it.
fact the same, so I suggest they could be the same file say
geometry-positive-zeros.out, as the main difference seems to be not printing
eg. (0,-0). In src/test/regress/expected, I propose
rm int2-i386-netbsd.out int4-i386-netbsd.out
mv geometry-hppa1.1.out geometry-positive-zeros.out
rm geometry-hppa2.0.out geometry-i386-netbsd.out
and the following patch to resultmap. I have only tested the netbsd results
on i386, but think that in all probability the differences will be the same
for other ports. If it turns out not to be the case, at least we might find
out.
Patrick Welche
Attached is a small fix for a stupid mistake I made in comment.c
- an attempt to drop a non-existent comment would dump core :-(.
Sometimes, I'm as sharp as a marble.
Sorry,
Mike Mascari
compiler warnings caused by lack of extern declarations in extern.h.
I believe the remaining gcc warnings here would go away if the ecpg
grammar could be tweaked so it doesn't use REJECT ...
that kept me from making perl secure.
Attached is uuencoded tarball to add PL/perl
to postgresql.
Things I know don't work.
-- triggers
-- SPI
The README file has a _VERY_ short tutorial.
Mark Hollomon
allows casts without specific length requirements to continue to work
as they did before; that is, x::char will not truncate the value of x,
whereas x::char(1) will. Likewise for NUMERIC precision/scale.
The column length defaults of char(1) and numeric(30,6) are now inserted
in analyze.c's processing of CREATE TABLE.
from a constraint condition does not violate the constraint (cf. discussion
on pghackers 12/9/99). Implemented by adding a parameter to ExecQual,
specifying whether to return TRUE or FALSE when the qual result is
really NULL in three-valued boolean logic. Currently, ExecRelCheck is
the only caller that asks for TRUE, but if we find any other places that
have the wrong response to NULL, it'll be easy to fix them.
Here is a patch to bring both libpq and psql to a state where it compiles on
win32 (native) again. A lot of things have changed, and I have not been able
to keep up with them all, so it has been broken for quite a while.
After this patch, at least it compiles. It also talks "basic talk" to the
server, but I have not yet tested all things. Sending queries, and using
e.g. \d or \dt works fine. The rest will have to be tested further.
It also bumps the version on libpq.dll to 7.0.
Everything should be enclosed in #ifdef WIN32, unless I have missed
something. Except for one or maybe two places where I have moved a #include
that should not be used on win32 from the "global area" into a "#ifndef
WIN32 area".
//Magnus
Attached is a patch which patches cleanly against the Sunday afternoon
snapshot. It modifies pg_dump to dump COMMENT ON statements for
user-definable descriptions. In addition, it also modifies comment.c so
that the operator behavior is as Peter E. would like: a comment on an
operator is applied to the underlying function.
Thanks,
Mike Mascari
is considerably more robust and accurate than it used to be.
Also, get rid of numeric's private allocation freelist, which is no longer
a win since Jan rewrote palloc.
SQL cast constructs can be performed during expression transformation
instead of during parsing. This allows constructs like x::numeric(9,2)
and x::int2::float8 to behave as one would expect.
read is reused for successive attributes, instead of being deleted and
recreated from scratch for each value read in. This reduces palloc/pfree
overhead a lot. COPY IN still seems to be noticeably slower than it was
in 6.5 --- we need to figure out why. This change takes care of the only
major performance loss I can see in copy.c itself, so the performance
problem is at a lower level somewhere.
by creating a race condition. It wasn't waiting for select() to say
write-ready immediately after connect, which meant that you might get
an unhelpful 'broken pipe' error message if connect failed, rather than
the intended error message.
CommandCounterIncrement to make new relation visible before trying to
parse/deparse the expressions. Also, eliminate unnecessary
setheapoverride calls in AddNewAttributeTuples.
oidvector/int2vector. pg_dump code was assuming that it would see
exactly FUNC_MAX_ARGS integers in the string returned by the backend.
That's no longer true. (Perhaps that change wasn't such a good idea
after all --- will it break any other applications??)
functions, which would lead to trouble with datatypes that paid attention
to the typelem or typmod parameters to these functions. In particular,
incorrect code in pg_aggregate.c explains the platform-specific failures
that have been reported in NUMERIC avg().
- Prevent permissions on indexes
- Instituted --enable-multibyte option and tweaked the MB build process where necessary
- initdb prompts for superuser password
* Let unprivileged users change their own passwords.
* The password is now an Sconst in the parser, which better reflects its text datatype and also
forces users to quote them.
* If your password is NULL you won't be written to the password file, meaning you can't connect
until you have a password set up (if you use password authentication).
* When you drop a user that owns a database you get an error. The database is not gone.
in libpq --- mostly, poor response to error conditions. You now actually
get to see the postmaster's 'The Data Base System is starting up' message,
which you didn't before. I suspect the SSL code is still broken though.
choke on relation or attribute names containing spaces, quotes, or other
special characters. This fixes a TODO item. It also forces initdb,
since stored rule strings change.
errors. VACUUM normally compacts the table back-to-front, and stops
as soon as it gets to a page that it has moved some tuples onto.
(This logic doesn't make for a complete packing of the table, but it
should be pretty close.) But the way it was checking whether it had
got to a page with some moved-in tuples was to look at whether the
current page was the same as the last page of the list of pages that
have enough free space to be move-in targets. And there was other
code that would remove pages from that list once they got full.
There was a kluge that prevented the last list entry from being
removed, but it didn't get the job done. Fixed by keeping a separate
variable that contains the largest block number into which a tuple
has been moved. There's no longer any need to protect the last element
of the fraged_pages list.
Also, fix NOTICE messages to describe elapsed user/system CPU time
correctly.
Instead of hard-wiring one result file per platform, there is a map file
'resultmap' that says which one to use --- a lot like template/.similar.
I have only created entries in resultmap for my own platform (HPUX) so
far; feel free to add lines for other platforms.
which is broken in some weird way that I don't understand. I think it
may be exposing a bug in the new psql --- for one thing, I get different
results when I run psql by hand than the regress script gets. What
the heck???
quote_postgres(...) in ecpglib.c.
The code in CVS reads:
quote_postgres(char *arg, int lineno)
{
char *res = (char *) ecpg_alloc(2 * strlen(arg) + 3, lineno);
int i,
ri = 0;
if (!res)
return (res);
res[ri++] = '\'';
for (i = 0, ri=0; arg[i]; i++, ri++)
{
switch (arg[i])
{
case '\'':
res[ri++] = '\'';
break;
case '\\':
res[ri++] = '\\';
break;
default:
;
}
The problem here is that ri is reset to 0, thus overwriting the initial
quote.
Stephen Birch
if presented an uninitialized (all zeroes) page. The system no longer
crashes hard if an all-zeroes page is present in a relation. There seem
to be some boundary conditions where a page will be appended to a relation
and zeroed, but its page header is never initialized; until we can track
down and fix all of those, robustness seems like a good idea.
Also, clean up some obsolete and downright wrong comments.
1) datetime_pl_span() added the seconds field before adding the months
field. This lead to erroneous results for e.g.
select datetime '1999-11-30' + timespan '1 mon - 1 sec';
Reverse the order of operations to add months first.
2) tm2timespan() did all intermediate math as integer, converting to double
at the very end. This resulted in hidden overflows when given very large
integer days, hours, etc. For example,
select '74565 days'::timespan;
produced the wrong result. Change code to ensure that doubles are used
for intermediate calculations.
Thanks to Olivier PRENANT <ohp@pyrenet.fr> and
Tulassay Zsolt <zsolt@tek.bke.hu> for problem reports and to Tom Lane for
accurate analyses.
during InitProcessingMode and the CurrentTransactionState was neither
TRANS_DEFAULT nor TRANS_DISABLED. Unfortunately, after someone's recent
change to start the transaction manager earlier in startup than it used
to be started, that caused an abort() and consequent database system
reset on quite harmless errors (such as rejecting an invalid user name!).
As far as I can see, the test on CurrentTransactionState was completely
useless anyway, so I've removed it.
relcache entry no longer leaks a small amount of memory. index_endscan
now releases all the memory acquired by index_beginscan, so callers of it
should NOT pfree the scan descriptor anymore.
I finally got around to schlepping through pg_dump, to finish what I started
about three months (or more) ago. Attached is a gzipped diff file to apply
in the bin/pg_dump directory. This should remove all string length
dependencies, except one, which I'm working on. It has been through some
rudimentary unit testing, but that's about it, so if any of you would give
it a more strenuous run-through, I'd be grateful for the feedback.
Cheers...
Ansley, Michael
SELECT null::text;
SELECT int4fac(null);
work as expected now. In some cases a NULL must be surrounded by
parentheses:
SELECT 2 + null; fails
SELECT 2 + (null); OK
This is a grammatical ambiguity that seems difficult to avoid. Other
than that, NULLs seem to behave about like you'd expect. The internal
implementation is that NULL constants are typed as UNKNOWN (like
untyped string constants) until the parser can deduce the right type.
Locate path of postmaster in a portable way (stolen from initdb)
Add postmaster.opts.default.sample which should be copied into
$PGLIB in the installtion process. Also, it will be installed into
$PGDATA while initdb is running.
a ".pgc " extension. The second patch fixes a coredump when there is
more than one input file (in that case, cur and types were not set to
NULL before processing the second f ile)
The patch below modifies the accepted grammar of ecpg to accept
FETCH [direction] [amount] cursor name
i.e. the IN|FROM clause becomes optional (as in Oracle and Informix).
This removes the incompatibility mentioned in section "Porting From
Other RDBMS Packages" p169, PostgreSQL Programmer's Guide. The grammar
is modified in such a way as to avoid shift/reduce conflicts. It does
not accept the statement "EXEC SQL FETCH;" anymore, as the old grammar
did (this seems to be a bug of the old grammar anyway).
This patch cleans up the handling of space characters in the scanner;
some patte rns require \n to be in {space}, some do not. A second fix is
the handling of cpp continuati on lines; the old pattern did not match
these. The parser is patched to fix an off-by-one error in the #line
directives. The pa rser is also enhanced to report the correct location
of errors in declarations in the "E XEC SQL DECLARE SECTION". Finally,
some right recursions in the parser were replaced by left-recursions.
This patch adds preprocessor directives to ecpg; in particular
EXEC SQL IFDEF, EXEC SQL IFNDEF, EXEC SQL ELSE, EXEC SQL ELIF and EXEC SQL ENDIF
"EXEC SQL IFDEF" is used with defines made with "EXEC SQL DEFINE" and
defines, specified on the command line with -D. Defines, specified on
the command line are persistent across multiple input files. Defines can
be nested up to a maximum level of 128 (see patch). There is a fair
amount of error checking to make sure directives are matched properly. I
need preprocessor directives for porting code, that is written for an
Informix database, to a PostgreSQL database, while maintaining
compatibility with the original code. I decided not to extend the
already large ecpg grammar. Everything is done in the scanner by adding
some states, e.g. to skip all input except newlines and directives. The
preprocessor commands are compatible with Informix. Oracle uses a cpp
replacement.
Rene Hogendoorn
with DEC C.
DEC C doesn't handle double values greater than DBL_MAX, but some
PostgreSQL geo functions assign greater than DBL_MAX values to some vars
in some special cases - that couses SIGFPE. I dunno if that is the only place
to fix to work well with DEC C.
Kirill Nosov.
rather than returning a NaN for bogus input to pow(). Namely, HPUX 10.20.
I think this is sufficient evidence for what I thought all along, which
is that the float.c code *must* look at errno whether finite() exists or
not.
> > for them to actually set out and do it. Many new users are
> > of the not-so-knowledgable variety, and shell scripting isn't
> > something they want to undertake.
>
> Can someone modify the vacuumdb shell script to do that?
i tried it... it seems to work
neko@kredit.sth.sz
initdb. No more obscure dependencies on environment variables or paths.
It
now finds the templates and the right postgres itself (with cmd line
options as fallback). It also no longer depends on $USER (su safe), and
doesn't advertise that --username allows you to install the db as a
different user, since that doesn't work anyway. Also, recovery and
cleanup
on all errors. Consistent options, clearer documentation.
Please take a look at this and adopt it if you feel it's safe enough. I
have simulated all the stupid circumstances I could think of, but you
never know with shell scripts.
Oh yeah, you can give the postgres user a default password now.
--
Peter Eisentraut Sernanders väg 10:115
I sending promised patch with:
* getopt_long() - for pg_dump (portable)
* and "Usage: " changes in scripts in src/bin/
- this changes are cosmetic only, not change any
feature ...etc.
All PostgreSQL routines (scripts) support now long options and
help's output is alike for all scripts and all support -? or --help.
Karel
Karel Zak <zakkr@zf.jcu.cz> http://home.zf.jcu.cz/~zakkr/
>go about this. That will risk breaking existing applications that use
>those names as column names.
>
>It should actually almost work to write sq.nextval as things stand,
>because Postgres has for a long time considered table.function and
>function(table) to be interchangeable notations for certain kinds of
>functions. nextval doesn't seem to be one of that kind of function,
>at the moment. I'd suggest leaving the grammar as it was, and taking a
>look at ParseFuncOrColumn in parse_func.c to see if you can't persuade
>it to accept the sequence functions in that style.
OK, good point. I tried to implement it somewhere else and ended up
extending transformAttr. Attached you'll find the patch.
Jeroen van Vianen
didn't have time for documentation yet, but I'll write some. There are
still some things to work out what happens when you alter or drop users,
but the group stuff in and by itself is done.
--
Peter Eisentraut Sernanders väg 10:115
equality. The lobits macro is wrong and extracts the wrong set of
bits out of the structure.
To exhibit the problem:
select '000000:000000'::macaddr = '000000:110000'::macaddr ;
?column?
--------
t
(1 row)
Daniel Boyd
triggered
> function now returns the right datatype.
Oops, I got crossed up with Jan's improvements. Ignore this.
--
Peter Eisentraut Sernanders väg 10:115
peter_e@gmx.net 75262 Uppsala
anywhere from zero to two TODO items.
* Allow flag to control COPY input/output of NULLs
I got this:
COPY table .... [ WITH NULL AS 'string' ]
which does what you'd expect. The default is \N, otherwise you can use
empty strings, etc. On Copy In this acts like a filter: every data item
that looks like 'string' becomes a NULL. Pretty straightforward.
This also seems to be related to
* Make postgres user have a password by default
If I recall this discussion correctly, the problem was actually that the
default password for the postgres (or any) user is in fact "\N", because
of the way copy is used. With this change, the file pg_pwd is copied out
with nulls as empty strings, so if someone doesn't have a password, the
password is just '', which one would expect from a new account. I don't
think anyone really wants a hard-coded default password.
Peter Eisentraut Sernanders väg 10:115
* Document/trigger/rule so changes to pg_shadow recreate pg_pwd
I did it with a trigger and it seems to work like a charm. The function
that already updates the file for create and alter user has been made a
built-in "SQL" function and a trigger is created at initdb time.
Comments around the pg_pwd updating function seem to be worried about
this
routine being called concurrently, but I really don't see a reason to
worry about this. Verify for yourself. I guess we never had a system
trigger before, so treat this with care, and feel free to adjust the
nomenclature as well.
--
Peter Eisentraut Sernanders väg 10:115
at all, and because of shell quoting rules this can't be fixed, so I put
in error messages to that end.
Also, calling create or drop database in a transaction block is not so
good either, because the file system mysteriously refuses to roll back rm
calls on transaction aborts. :) So I put in checks to see if a transaction
is in progress and signal an error.
Also I put the whole call in a transaction of its own to be able to roll
back changes to pg_database in case the file system operations fail.
The alternative location issues I posted recently were untouched, awaiting
the outcome of that discussion. Other than that, this should be much more
fool-proof now.
The docs I cleaned up as well.
Peter Eisentraut Sernanders väg 10:115
yet, but at least we can give a better error message:
regression=> select count(distinct f1) from int4_tbl;
ERROR: aggregate(DISTINCT ...) is not implemented yet
instead of 'parser: parse error at or near distinct'.
I was able to crash postgres 6.5.3 when I did an 'alter user' command.
After I started a debugger I found the problem in the timezone handling
of
datetime (my Linux box lost its timezone information, that's how the
problem occurred).
Only 7 bytes are reserved for the timezone, without checking for
boundaries.
Attached is a patch that fixes this problem and emits a NOTICE if a
timezone is encountered that is longer than MAXTZLEN bytes, like this:
Jeroen van Vianen
against the sources from one hour ago and contain all the portable and
up
to date stuff.
A few other CVS "householding" things you might want to take care of:
* Remove the src/bin/cleardbdir directory
* Remove the file src/bin/psql/sql_help.h from the repository, as it is
a derived file and is build by the release_prep.
Peter Eisentraut
(which are palloc'd) instead of DLLists (which are malloc'd). Not very
significant, since this routine seldom has anything useful to do, but
a leak is a leak...
them into the scripts dir. I also added a --list option to show already
installed languages.
This whole moving and renaming totally confused CVS and my checked out
copy got completely fried last night. When you apply the source patch,
please make sure that all the directories src/bin/{create|destroy}* as
well as vacuumdb, cleardbdir are gone and that all the scripts (7) are
in
scripts/.
Meanwhile I am still puzzled about what happened with the docs patch.
Because I don't know what you got now, the second attachment contains
the
files
ref/allfiles.sgml
ref/commands.sgml
ref/createlang.sgml
ref/droplang.sgml
doc/src/sgml/Makefile
Peter Eisentraut Sernanders väg 10:115
parameter in some flavor of Unix, but Linux, HPUX, and SunOS all say
it's int. For now I'm just going to make it int so that I can compile.
If the other way is actually necessary on some Unix somewhere, I guess
we will need a configure test...
This one should work much better than the one I sent in previously. The
functionality is the same, but the patch was missing one file resulting
in
the compilation failing. The docs also received a minor fix.
Peter Eisentraut Sernanders väg 10:115
PQconnectStart
PQconnectPoll
PQresetStart
PQresetPoll
PQsetenvStart
PQsetenvPoll
PQsetenvAbort
and brings into the published interface
PQsetenv.
The first four are asynchronous analogues of PQconnectdb and PQreset -
they allow an application to connect to the DB without blocking on
remote I/O.
The PQsetenv functions perform an environment negotiation with the
server.
Internal to libpq, pqReadReady and pqWriteReady have been made available
across the library (they were previously static functions inside
fe-misc.c). A lot of internal rearrangement has been necessary to
support these changes.
The API documentation has been updated also.
Caveats:
o The Windows code does not default to using non-blocking sockets,
since I have no documentation: Define WIN32_NON_BLOCKING_CONNECTIONS to
do that.
o The SSL code still blocks.
Ewan Mellor.
You have CommLog and Debug enabled
You encounter in error in any operation (SQLConnect/SQLExec).
Previously, the extra logging didn't check for NULL pointers
when trying to print some of the strings- the socket error
message could frequently be NULL by design (if there was no socket
error)
and Solaris does not handle NULLS passed to things like printf
("%s\n",string);
gracefully.
This basically duplicates the functionality found in Linux where passing
a null pointer
to printf prints "(NULL)". No very elegant, but the logging is for debug
only anyway.
Dirk Niggemann
table owner in order to vacuum a table. This is mainly to prevent
denial-of-service attacks via repeated vacuums. Allow VACUUM to gather
statistics about system relations, except for pg_statistic itself ---
not clear that it's worth the trouble to make that case work cleanly.
Cope with possible tuple size overflow in pg_statistic tuples; I'm
surprised we never realized that could happen. Hold a couple of locks
a little longer to try to prevent deadlocks between concurrent VACUUMs.
There still seem to be some problems in that last area though :-(
expressions were written without spaces between operators and operands.
Problem was that something like "if new.f1=new.f2 then" would be translated
to "if $1=$2 then", and the Postgres lexer would tokenize that the wrong
way. Fix is to emit spaces around $paramno constructs to ensure they are
seen as separate tokens.
parallel --- and, not incidentally, removing a common reason for needing
manual cleanup by the DB admin after a crash. Remove initial global
delete of pg_statistics rows in VACUUM ANALYZE; this was not only bad
for performance of other backends that had to run without stats for a
while, but it was fundamentally broken because it was done outside any
transaction. Surprising we didn't see more consequences of that.
Detect attempt to run VACUUM inside a transaction block. Check for
query cancel request before starting vacuum of each table. Clean up
vacuum's private portal storage if vacuum is aborted.
By dropping stats rows here, we eliminate the need for VACUUM to do a
wholesale remove of stats rows. Before, pg_statistics was wiped clean
at the start of VACUUM, ensuring poor planning results for any backends
running in parallel until VACUUM got around to rebuilding the stats for
the relations they are accessing.
rate
it's better than what used to be there.
* Does proper SQL "host variable" substitution as pointed out by Andreas
Zeugwetter (thanks): select * from :foo; Also some changes in how ':'
and ';' are treated (escape with \ to send to backend). This does
_not_
affect the '::' cast operator, but perhaps others that contain : or ;
(but there are none right now).
* To show description with a <something> listing, append '?' to command
name, e.g., \df?. This seemed to be the convenient and logical
solution.
Or append a '+' to see more useless information, e.g., \df+.
* Fixed fflush()'ing bug pointed out by Jan during the regression test
discussion.
* Added LastOid variable. This ought to take care of TODO item "Add a
function to return the last inserted oid, for use in psql scripts"
(under CLIENTS)
E.g.,
insert into foo values(...);
insert into bar values(..., :LastOid);
\echo $LastOid
* \d command shows constraints, rules, and triggers defined on the table
(in addition to indices)
* Various fixes, optimizations, corrections
* Documentation update as well
Note: This now requires snprintf(), which, if necessary, is taken from
src/backend/port. This is certainly a little weird, but it should
suffice
until a source tree cleanup is done.
Enjoy.
--
Peter Eisentraut Sernanders väg 10:115
Make all system indexes unique.
Make all cache loads use system indexes.
Rename *rel to *relid in inheritance tables.
Rename cache names to be clearer.
for the case of errors in backend startup, and proc_exit's method for
coping with errors during proc_exit was *completely* busted. Fixed per
discussions on pghackers around 11/6/99.
it wants to release. This leads to a race condition: does the backend
that's trying to flush the buffer do so before the one that's deleting the
relation does so? Usually no problem, I expect, but on occasion this could
lead to hard-to-reproduce complaints from md.c, especially mdblindwrt.
returns a list of RelOptInfos, eliminating the need for static state
in index_info. That static state was a direct cause of coredumps; if
anything decided to elog(ERROR) partway through an index_info search of
pg_index, the next query would try to close a scan pointer that was
pointing at no-longer-valid memory. Another example of the reasons to
avoid static state variables...
of the index it wants to destroy. This ensures that no other backend is
actively scanning or updating that index. Getting exclusive access on
the index alone is NOT sufficient, because the executor is rather
cavalier about getting locks on indexes --- see ExecOpenIndices().
It might be better to grab index locks in the executor, but I'm not
sure the extra lockmanager traffic is really worth it just to make
index_destroy cleaner.
(whoever thought world-writable files were a good default????). Modify
the pg_pwd code so that pg_pwd is created with 600 permissions. Modify
initdb so that permissions on a pre-existing PGDATA directory are not
blindly accepted: if the dir is already there, it does chmod go-rwx
to be sure that the permissions are OK and the dir actually is owned
by postgres.
inval.c thought it could safely use the catcache to look up the OIDs of
system relations. Not good, considering that inval.c could be called
during catcache loading, if a shared-inval message arrives. Rip out the
lookup logic and instead use the known OIDs from pg_class.h.
table defaults or rules: translate them to a function call so that
parse_coerce doesn't reduce them to a date or time constant immediately.
Also, eliminate a lot of redundancy in the expression grammar by
defining a new nonterminal com_expr, which contains all the productions
that can be shared by a_expr and b_expr.
Warn_restart has been set by the backend main loop. This means that
elog(ERROR) or elog(FATAL) in the postmaster or during backend startup
now have well-defined behavior: proc_exit() rather than coredump.
In the case of elog() inside the postmaster, I think that proc_exit()
is probably not enough --- don't we want our child backends to be
forced to quit too? But I don't understand Vadim's recent changes in
this area, so I'll leave it to him to look over and tweak if needed.
subselects can only appear on the righthand side of a binary operator.
That's still true for quantified predicates like x = ANY (SELECT ...),
but a subselect that delivers a single result can now appear anywhere
in an expression. This is implemented by changing EXPR_SUBLINK sublinks
to represent just the (SELECT ...) expression, without any 'left hand
side' or combining operator --- so they're now more like EXISTS_SUBLINK.
To handle the case of '(x, y, z) = (SELECT ...)', I added a new sublink
type MULTIEXPR_SUBLINK, which acts just like EXPR_SUBLINK used to.
But the grammar will only generate one for a multiple-left-hand-side
row expression.