locking conflict against concurrent CHECKPOINT that was discussed a few
weeks ago. Also, if not using WAL archiving (which is always true ATM
but won't be if PITR makes it into this release), there's no need to
WAL-log the index build process; it's sufficient to force-fsync the
completed index before commit. This seems to gain about a factor of 2
in my tests, which is consistent with writing half as much data. I did
not try it with WAL on a separate drive though --- probably the gain would
be a lot less in that scenario.
temp tables, and avoid WAL-logging truncations of temp tables. Do issue
fsync on truncated files (not sure this is necessary but it seems like
a good idea).
rather than an error code, and does elog(ERROR) not elog(WARNING)
when it detects a problem. All callers were simply elog(ERROR)'ing on
failure return anyway, and I find it hard to envision a caller that would
not, so we may as well simplify the callers and produce the more useful
error message directly.
explicitly fsync'ing every (non-temp) file we have written since the
last checkpoint. In the vast majority of cases, the burden of the
fsyncs should fall on the bgwriter process not on backends. (To this
end, we assume that an fsync issued by the bgwriter will force out
blocks written to the same file by other processes using other file
descriptors. Anyone have a problem with that?) This makes the world
safe for WIN32, which ain't even got sync(2), and really makes the world
safe for Unixen as well, because sync(2) never had the semantics we need:
it offers no way to wait for the requested I/O to finish.
Along the way, fix a bug I recently introduced in xlog recovery:
file truncation replay failed to clear bufmgr buffers for the dropped
blocks, which could result in 'PANIC: heap_delete_redo: no block'
later on in xlog replay.
than being random pieces of other files. Give bgwriter responsibility
for all checkpoint activity (other than a post-recovery checkpoint);
so this child process absorbs the functionality of the former transient
checkpoint and shutdown subprocesses. While at it, create an actual
include file for postmaster.c, which for some reason never had its own
file before.
about a third, make it work on non-Windows platforms again. (But perhaps
I broke the WIN32 code, since I have no way to test that.) Fold all the
paths that fork postmaster child processes to go through the single
routine SubPostmasterMain, which takes care of resurrecting the state that
would normally be inherited from the postmaster (including GUC variables).
Clean up some places where there's no particularly good reason for the
EXEC and non-EXEC cases to work differently. Take care of one or two
FIXMEs that remained in the code.
(SIGUSR1, which we have not been using recently) instead of piggybacking
on SIGUSR2-driven NOTIFY processing. This has several good results:
the processing needed to drain the sinval queue is a lot less than the
processing needed to answer a NOTIFY; there's less contention since we
don't have a bunch of backends all trying to acquire exclusive lock on
pg_listener; backends that are sitting inside a transaction block can
still drain the queue, whereas NOTIFY processing can't run if there's
an open transaction block. (This last is a fairly serious issue that
I don't think we ever recognized before --- with clients like JDBC that
tend to sit with open transaction blocks, the sinval queue draining
mechanism never really worked as intended, probably resulting in a lot
of useless cache-reset overhead.) This is the last of several proposed
changes in response to Philip Warner's recent report of sinval-induced
performance problems.
costing us lots more to maintain than it was worth. On shared tables
it was of exactly zero benefit because we couldn't trust it to be
up to date. On temp tables it sometimes saved an lseek, but not often
enough to be worth getting excited about. And the real problem was that
we forced an lseek on every relcache flush in order to update the field.
So all in all it seems best to lose the complexity.
of whether we have successfully read data into a buffer; this makes the
error behavior a bit more transparent (IMHO anyway), and also makes it
work correctly for local buffers which don't use Start/TerminateBufferIO.
Collapse three separate functions for writing a shared buffer into one.
This overlaps a bit with cleanups that Neil proposed awhile back, but
seems not to have committed yet.
of VACUUM cases so that VACUUM requests don't affect the ARC state at all,
avoid corner case where BufferSync would uselessly rewrite a buffer that
no longer contains the page that was to be flushed. Make some minor
other cleanups in and around the bufmgr as well, such as moving PinBuffer
and UnpinBuffer into bufmgr.c where they really belong.
* removed a few redundant defines
* get_user_name safe under win32
* rationalized pipe read EOF for win32 (UPDATED PATCH USED)
* changed all backend instances of sleep() to pg_usleep
- except for the SLEEP_ON_ASSERT in assert.c, as it would exceed a
32-bit long [Note to patcher: If a SLEEP_ON_ASSERT of 2000 seconds is
acceptable, please replace with pg_usleep(2000000000L)]
I added a comment to that part of the code:
/*
* It would be nice to use pg_usleep() here, but only does 2000 sec
* or 33 minutes, which seems too short.
*/
sleep(1000000);
Claudio Natoli
in s_lock.c were not updated, and still refers to select. Made my grep
hit the wrong files, so I figured a simple patch was in order.. (other
refs in the same comment block was changed..)
Magnus Hagander
* Changes incorrect CYGWIN defines to __CYGWIN__
* Some localtime returns NULL checks (when unchecked cause SEGVs under
Win32
regression tests)
* Rationalized CreateSharedMemoryAndSemaphores and
AttachSharedMemoryAndSemaphores (Bruce, I finally remembered to do it);
requires attention.
Claudio Natoli
and FreeDir routines modeled on the existing AllocateFile/FreeFile.
Like the latter, these routines will avoid failing on EMFILE/ENFILE
conditions whenever possible, and will prevent leakage of directory
descriptors if an elog() occurs while one is open.
Also, reduce PANIC to ERROR in MoveOfflineLogs() --- this is not
critical code and there is no reason to force a DB restart on failure.
All per recent trouble report from Olivier Hubaut.
number of openable files and the number already opened. This eliminates
depending on sysconf(_SC_OPEN_MAX), and allows much saner behavior on
platforms where open-file slots are used up by semaphores.
applied, deadlock detection and statement_timeout now works.
The file timer.c goes into src/backend/port/win32/.
The patch also removes two lines of "printf debugging" accidentally left
in pqsignal.h, in the console control handler.
Magnus Hagander
for already empty buffers because their buffer tag was not cleard out
when the buffers have been invalidated before.
Also removed the misnamed BM_FREE bufhdr flag and replaced the checks,
which effectively ask if the buffer is unpinned, with checks against the
refcount field.
Jan
wit: Add a header record to each WAL segment file so that it can be reliably
identified. Avoid splitting WAL records across segment files (this is not
strictly necessary, but makes it simpler to incorporate the header records).
Make WAL entries for file creation, deletion, and truncation (as foreseen but
never implemented by Vadim). Also, add support for making XLOG_SEG_SIZE
configurable at compile time, similarly to BLCKSZ. Fix a couple bugs I
introduced in WAL replay during recent smgr API changes. initdb is forced
due to changes in pg_control contents.
subroutine in src/port/pgsleep.c. Remove platform dependencies from
miscadmin.h and put them in port.h where they belong. Extend recent
vacuum cost-based-delay patch to apply to VACUUM FULL, ANALYZE, and
non-btree index vacuuming.
By the way, where is the documentation for the cost-based-delay patch?
the relcache, and so the notion of 'blind write' is gone. This should
improve efficiency in bgwriter and background checkpoint processes.
Internal restructuring in md.c to remove the not-very-useful array of
MdfdVec objects --- might as well just use pointers.
Also remove the long-dead 'persistent main memory' storage manager (mm.c),
since it seems quite unlikely to ever get resurrected.
Natoli and Bruce Momjian (and some cosmetic fixes from Neil Conway).
Changes:
- remove duplicate signal definitions from pqsignal.h
- replace pqkill() with kill() and redefine kill() in Win32
- use ereport() in place of fprintf() in some error handling in
pqsignal.c
- export pg_queue_signal() and make use of it where necessary
- add a console control handler for Ctrl-C and similar handling
on Win32
- do WaitForSingleObjectEx() in CHECK_FOR_INTERRUPTS() on Win32;
query cancelling should now work on Win32
- various other fixes and cleanups
against the latest shapshot. It also includes the replacement of kill()
with pqkill() and sigsetmask() with pqsigsetmask().
Passes all tests fine on my linux machine once applied. Still doesn't
link completely on Win32 - there are a few things still required. But
much closer than before.
At Bruce's request, I'm goint to write up a README file about the method
of signals delivery chosen and why the others were rejected (basically a
summary of the mailinglist discussions). I'll finish that up once/if the
patch is accepted.
Magnus Hagander
PostmasterPid variable, which gets set (early) in PostmasterMain
getppid would not be the postmaster?
[fork/exec] Implements processCancelRequest by keeping an array of
pid/cancel_key structs in shared mem
[fork/exec] Moves AttachSharedMemoryAndSemaphores call for backends into
SubPostmasterMain
[win32] Implements reaper/waitpid by keeping an arrays of children
pids,handles in postmaster local mem
- this item is largely untested, for reasons which should be
obvious, but appears sound
[win32/all] Added extern for pgpipe in Win32 case, and changed the second
pipe call (which seems to have been missed earlier) to pgpipe
[win32] #define'd ftruncate to chsize in the Win32 case
[win32] PG_USLEEP for Win32 has a misplaced paren. Fixed.
[win32] DLLIMPORT handling for MingW case
Claudio Natoli
done by the background writer between writing dirty blocks and
napping.
none (default) no action
sync bgwriter calls smgrsync() causing a sync(2)
A global sync() is only good on dedicated database servers, so
more flush methods should be added in the future.
Jan
pointer type when it is not necessary to do so.
For future reference, casting NULL to a pointer type is only necessary
when (a) invoking a function AND either (b) the function has no prototype
OR (c) the function is a varargs function.
- Update comment in IsReservedName() to the present day
- Improve some variable & function names in commands/vacuum.c. I
was planning to rewrite this to avoid lappend(), but since I
still intend to do the list rewrite, there's no need for that.
- Update some smgr comments which seemed to imply that we still
forced all dirty pages to disk at commit-time.
- Replace some #ifdef DIAGNOSTIC code with assertions.
- Make the distinction between OS-level file descriptors and
virtual file descriptors a little clearer in a few comments
- Other minor comment improvements in the smgr code
call. You'd think this would cause some problems, but because of the
way hash_create is coded, the only side-effect was creation of a useless
memory context for the hashtable.
instruction in the s_lock() wait loop, and use test before test-and-set
in TAS() macro to avoid unnecessary bus traffic. Patch from Manfred
Spraul, reworked a bit by Tom.
that were broken, try to make layout of s_lock.h entries consistent,
use HAVE_SPINLOCKS in preference to HAS_TEST_AND_SET everywhere outside
s_lock.h itself.
commit, but I am adding it now so it is in CVS.]
The patch basically is a slight rearrangement of the code to allow
fork/exec on Unix, with the ultimate goal of doing CreateProcess on
Win32. The changes are:
o Write out postmaster global variables and per-backend
variables to be read by the exec'ed backend
o Mark some static variables as global when exec is used so
then can be dumped from postmaster.c, marked NON_EXEC_STATIC
o Remove value passing with -p now that we have per-backend
file
o Move some pointer storage out of shared memory for easier
dumping.
o Modified pgsql_temp directory cleanup to handle per-database
directories and the backend exec directory under datadir.
Claudio Natoli
some concurrent changes Jan was making to the bufmgr. Here's an
updated version of the patch -- it should apply cleanly to CVS
HEAD and passes the regression tests.
This patch makes the following changes:
- remove the UnlockAndReleaseBuffer() and UnlockAndWriteBuffer()
macros, and replace uses of them with calls to the appropriate
functions.
- remove a bunch of #ifdef BMTRACE code: it is ugly & broken
(i.e. it doesn't compile)
- make BufferReplace() return a bool, not an int
- cleanup some logic in bufmgr.c; should be functionality
equivalent to the previous code, just cleaner now
- remove the BM_PRIVATE flag as it is unused
- improve a few comments, etc.
method control structure, or a table of control structures.
. Use type LOCKMASK where an int is not a counter.
. Get rid of INVALID_TABLEID, use INVALID_LOCKMETHOD instead.
. Use INVALID_LOCKMETHOD instead of (LOCKMETHOD) NULL, because
LOCKMETHOD is not a pointer.
. Define and use macro LockMethodIsValid.
. Rename LOCKMETHOD to LOCKMETHODID.
. Remove global variable LongTermTableId in lmgr.c, because it is
never used.
. Make LockTableId static in lmgr.c, because it is used nowhere else.
Why not remove it and use DEFAULT_LOCKMETHOD?
. Rename the lock method control structure from LOCKMETHODTABLE to
LockMethodData. Introduce a pointer type named LockMethod.
. Remove elog(FATAL) after InitLockTable() call in
CreateSharedMemoryAndSemaphores(), because if something goes wrong,
there is elog(FATAL) in LockMethodTableInit(), and if this doesn't
help, an elog(ERROR) in InitLockTable() is promoted to FATAL.
. Make InitLockTable() void, because its only caller does not use its
return value any more.
. Rename variables in lock.c to avoid statements like
LockMethodTable[NumLockMethods] = lockMethodTable;
lockMethodTable = LockMethodTable[lockmethod];
. Change LOCKMETHODID type to uint16 to fit into struct LOCKTAG.
. Remove static variables BITS_OFF and BITS_ON from lock.c, because
I agree to this doubt:
* XXX is a fetch from a static array really faster than a shift?
. Define and use macros LOCKBIT_ON/OFF.
Manfred Koizar
Ward's report that it can still happen in RC2 forces me to realize that
this is not a can't-happen condition after all, and that the compaction
code had better cope rather than panicking.
large objects. Dump all these in pg_dump; also add code to pg_dump
user-defined conversions. Make psql's large object code rely on
the backend for inserting/deleting LOB comments, instead of trying to
hack pg_description directly. Documentation and regression tests added.
Christopher Kings-Lynne, code reviewed by Tom
This first part of the background writer does no syncing at all.
It's only purpose is to keep the LRU heads clean so that regular
backends seldom to never have to call write().
Jan
pghackers proposal of 8-Nov. All the existing cross-type comparison
operators (int2/int4/int8 and float4/float8) have appropriate support.
The original proposal of storing the right-hand-side datatype as part of
the primary key for pg_amop and pg_amproc got modified a bit in the event;
it is easier to store zero as the 'default' case and only store a nonzero
when the operator is actually cross-type. Along the way, remove the
long-since-defunct bigbox_ops operator class.
Remove the 'strategy map' code, which was a large amount of mechanism
that no longer had any use except reverse-mapping from procedure OID to
strategy number. Passing the strategy number to the index AM in the
first place is simpler and faster.
This is a preliminary step in planned support for cross-datatype index
operations. I'm committing it now since the ScanKeyEntryInitialize()
API change touches quite a lot of files, and I want to commit those
changes before the tree drifts under me.
memory say 'out of shared memory'; some were doing that and some just
said 'out of memory'. Also add a HINT about increasing max_locks_per_transaction
where relevant, per suggestion from Sean Chittenden. (The former change
does not break the strings freeze; the latter does, but I think it's
worth doing anyway.)
discussion on pgsql-hackers: in READ COMMITTED mode we just have to force
a QuerySnapshot update in the trigger, but in SERIALIZABLE mode we have
to run the scan under a current snapshot and then complain if any rows
would be updated/deleted that are not visible in the transaction snapshot.
now able to cope with assigning new relfilenode values to nailed-in-cache
indexes, so they can be reindexed using the fully crash-safe method. This
leaves only shared system indexes as special cases. Remove the 'index
deactivation' code, since it provides no useful protection in the shared-
index case. Require reindexing of shared indexes to be done in standalone
mode, but remove other restrictions on REINDEX. -P (IgnoreSystemIndexes)
now prevents using indexes for lookups, but does not disable index updates.
It is therefore safe to allow from PGOPTIONS. Upshot: reindexing system catalogs
can be done without a standalone backend for all cases except
shared catalogs.
not just MAXALIGN boundaries. This makes a noticeable difference in
the speed of transfers to and from kernel space, at least on recent
Pentiums, and might help other CPUs too. We should look at making
this happen for local buffers and buffile.c too. Patch from Manfred Spraul.
pghackers. This fixes the problem recently reported by Markus KrÌutner
(hash bucket split corrupts the state of scans being done concurrently),
and I believe it also fixes all the known problems with deadlocks in
hash index operations. Hash indexes are still not really ready for prime
time (since they aren't WAL-logged), but this is a step forward.
index pages: when _bt_getbuf asks the FSM for a free index page, it is
possible (and, in some cases, even moderately likely) that the answer
will be the same page that _bt_split is trying to split. _bt_getbuf
already knew that the returned page might not be free, but it wasn't
prepared for the possibility that even trying to lock the page could
be problematic. Fix by doing a conditional rather than unconditional
grab of the page lock.
free'd for every transaction or statement, respectively. This patch
puts these data structures into static memory, thus saving a few CPU
cycles and two malloc calls per transaction or (in isolation level
READ COMMITTED) per query.
Manfred Koizar
least-recently-used strategy from clog.c into slru.c. It doesn't
change any visible behaviour and passes all regression tests plus a
TruncateCLOG test done manually.
Apart from refactoring I made a little change to SlruRecentlyUsed,
formerly ClogRecentlyUsed: It now skips incrementing lru_counts, if
slotno is already the LRU slot, thus saving a few CPU cycles. To make
this work, lru_counts are initialised to 1 in SimpleLruInit.
SimpleLru will be used by pg_subtrans (part of the nested transactions
project), so the main purpose of this patch is to avoid future code
duplication.
Manfred Koizar
Win32 port is now called 'win32' rather than 'win'
add -lwsock32 on Win32
make gethostname() be only used when kerberos4 is enabled
use /port/getopt.c
new /port/opendir.c routines
disable GUC unix_socket_group on Win32
convert some keywords.c symbols to KEYWORD_P to prevent conflict
create new FCNTL_NONBLOCK macro to turn off socket blocking
create new /include/port.h file that has /port prototypes, move
out of c.h
new /include/port/win32_include dir to hold missing include files
work around ERROR being defined in Win32 includes
detected during buffer dump to be labeled with the buffer location.
For example, if a page LSN is clobbered, we now produce something like
ERROR: XLogFlush: request 2C000000/8468EC8 is not satisfied --- flushed only
to 0/8468EF0
CONTEXT: writing block 0 of relation 428946/566240
whereas before there was no convenient way to find out which page had
been trashed.
harmless on signed-char machines but would lead to core dump in the
deadlock detection code if char is unsigned. Amazingly, this bug has
been here since 7.1 and yet wasn't reported till now. Thanks to Robert
Bruccoleri for providing the opportunity to track it down.
page when it's read in, per pghackers discussion around 17-Feb. Add a
GUC variable zero_damaged_pages that causes the response to be a WARNING
followed by zeroing the page, rather than the normal ERROR; this is per
Hiroshi's suggestion that there needs to be a way to get at the data
in the rest of the table.
(materialization into a tuple store) discussed on pgsql-hackers earlier.
I've updated the documentation and the regression tests.
Notes on the implementation:
- I needed to change the tuple store API slightly -- it assumes that it
won't be used to hold data across transaction boundaries, so the temp
files that it uses for on-disk storage are automatically reclaimed at
end-of-transaction. I added a flag to tuplestore_begin_heap() to control
this behavior. Is changing the tuple store API in this fashion OK?
- in order to store executor results in a tuple store, I added a new
CommandDest. This works well for the most part, with one exception: the
current DestFunction API doesn't provide enough information to allow the
Executor to store results into an arbitrary tuple store (where the
particular tuple store to use is chosen by the call site of
ExecutorRun). To workaround this, I've temporarily hacked up a solution
that works, but is not ideal: since the receiveTuple DestFunction is
passed the portal name, we can use that to lookup the Portal data
structure for the cursor and then use that to get at the tuple store the
Portal is using. This unnecessarily ties the Portal code with the
tupleReceiver code, but it works...
The proper fix for this is probably to change the DestFunction API --
Tom suggested passing the full QueryDesc to the receiveTuple function.
In that case, callers of ExecutorRun could "subclass" QueryDesc to add
any additional fields that their particular CommandDest needed to get
access to. This approach would work, but I'd like to think about it for
a little bit longer before deciding which route to go. In the mean time,
the code works fine, so I don't think a fix is urgent.
- (semi-related) I added a NO SCROLL keyword to DECLARE CURSOR, and
adjusted the behavior of SCROLL in accordance with the discussion on
-hackers.
- (unrelated) Cleaned up some SGML markup in sql.sgml, copy.sgml
Neil Conway
at database shutdown, and then load it again at database startup. This
preserves our hard-won knowledge of free space across restarts (given
an orderly shutdown, that is).
Adjustable threshold is gone in favor of keeping track of total requested
page storage and doling out proportional fractions to each relation
(with a minimum amount per relation, and some quantization of the results
to avoid thrashing with small changes in page counts). Provide special-
case code for indexes so as not to waste space storing useless page
free space counts. Restructure internal data storage to be a flat array
instead of list-of-chunks; this may cost a little more work in data
copying when reorganizing, but allows binary search to be used during
lookup_fsm_page_entry().
RelOid_pg_class, and transaction locks XactLockTableId. RelId is renamed
to objId.
- LockObject() and UnlockObject() functions created, and their use
sprinkled throughout the code to do descent locking for domains and
types. They accept lock modes AccessShare and AccessExclusive, as we
only really need a 'read' and 'write' lock at the moment. Most locking
cases are held until the end of the transaction.
This fixes the cases Tom mentioned earlier in regards to locking with
Domains. If the patch is good, I'll work on cleaning up issues with
other database objects that have this problem (most of them).
Rod Taylor
longer works -- IncrHeapAccessStat() didn't actually *do* anything
anymore, so no reason to keep it around AFAICS. I also fixed a
grammatical error in a comment.
Neil Conway
previously determined not to be the last segment of a relation.
This reduces the expected cost to one seek, rather than one seek per
segment. We can get away with this because truncation of a relation
will cause a relcache flush and so the md.c file descriptor will be
closed; when it is re-opened we will re-determine the last segment.
database access outside a transaction; revert bogus performance improvement
in SIBackendInit(); improve comments; add documentation (this part courtesy
Neil Conway).
>
> ... he is now about to write an inlined version that can go into
> s_lock.h . I'll send the new patch later on...
OK, here it comes:
An inlined version of tas(), that works for both, powerpc and
powerpc64. The patch is against 7.3b5 and passes the test suite on
both architectures.
Reinhard Max
between signal handler and enable/disable code, avoid accumulation of
timing error due to trying to maintain remaining-time instead of
absolute-end-time, disable timeout before commit not after.
ProcKill instead, where we still have a PGPROC with which to wait on
LWLocks. This fixes 'can't wait without a PROC structure' failures
occasionally seen during backend shutdown (I'm surprised they weren't
more frequent, actually). Add an Assert() to LWLockAcquire to help
catch any similar mistakes in future. Fix failure to update MyProcPid
for standalone backends and pgstat processes.
already fixed by You. However there were a few left and attached patch
should fix the rest of them.
I used StringInfo only in 2 places and both of them are inside debug
ifdefs. Only performance penalty will come from using strlen() like all
the other code does.
I also modified some of the already patched parts by changing
snprintf(buf, 2 * BUFSIZE, ... style lines to
snprintf(buf, sizeof(buf), ... where buf is an array.
Jukka Holappa
(overlaying low byte of page size) and add HEAP_HASOID bit to t_infomask,
per earlier discussion. Simplify scheme for overlaying fields in tuple
header (no need for cmax to live in more than one place). Don't try to
clear infomask status bits in tqual.c --- not safe to do it there. Don't
try to force output table of a SELECT INTO to have OIDs, either. Get rid
of unnecessarily complex three-state scheme for TupleDesc.tdhasoids, which
has already caused one recent failure. Improve documentation.
available (else there's no way to interpret the list links). Change
pg_locks view to show transaction ID locks separately from ordinary
relation locks. Avoid showing N duplicate rows when the same lock is
held multiple times (seems unlikely that users care about exact hold
count). Improve documentation.
connections by the superuser only.
This patch replaces the last patch I sent a couple of days ago.
It closes a connection that has not been authorised by a superuser if it would
leave less than the GUC variable ReservedBackends
(superuser_reserved_connections in postgres.conf) backend process slots free
in the SISeg. This differs to the first patch which only reserved the last
ReservedBackends slots in the procState array. This has made the free slot
test more expensive due to the use of a lock.
After thinking about a comment on the first patch I've also made it a fatal
error if the number of reserved slots is not less than the maximum number of
connections.
Nigel J. Andrews
copying into a fixed-size buffer (in this case, a buffer of
NAMEDATALEN bytes). AFAICT nothing to worry about here, but worth
fixing anyway...
Neil Conway
width types and varlena types, since with the introduction of CSTRING as
a more-or-less-real type, these concepts aren't identical. I've tried to
use varlena consistently to denote datatypes with typlen = -1, ie, they
have a length word and are potentially TOASTable; while the term variable
width covers both varlena and cstring (and, perhaps, someday other types
with other rules for computing the actual width). No code changes in this
commit except for renaming a couple macros.
This patch is an updated version of the lock listing patch. I've made
the following changes:
- write documentation
- wrap the SRF in a view called 'pg_locks': all user-level
access should be done through this view
- re-diff against latest CVS
One thing I chose not to do is adapt the SRF to use the anonymous
composite type code from Joe Conway. I'll probably do that eventually,
but I'm not really convinced it's a significantly cleaner way to
bootstrap SRF builtins than the method this patch uses (of course, it
has other uses...)
Neil Conway
> There's no longer a separate call to heap_storage_create in that routine
> --- the right place to make the test is now in the storage_create
> boolean parameter being passed to heap_create. A simple change, but
> it passeth patch's understanding ...
Thanks.
Attached is a patch against cvs tip as of 8:30 PM PST or so. Turned out
that even after fixing the failed hunks, there was a new spot in
bufmgr.c which needed to be fixed (related to temp relations;
RelationUpdateNumberOfBlocks). But thankfully the regression test code
caught it :-)
Joe Conway
offset past the last-used-item-plus-one, since that would result in
leaving uninitialized holes in the item pointer array. AFAICT the only
place that was depending on this was btree index build, which was being
cavalier about when to fill in the P_HIKEY pointer; easily fixed.
Also a small performance improvement: shuffle itemid's by means of
memmove, not a one-at-a-time loop.
The local buffer manager is no longer used for newly-created relations
(unless they are TEMP); a new non-TEMP relation goes through the shared
bufmgr and thus will participate normally in checkpoints. But TEMP relations
use the local buffer manager throughout their lifespan. Also, operations
in TEMP relations are not logged in WAL, thus improving performance.
Since it's no longer necessary to fsync relations as they move out of the
local buffers into shared buffers, quite a lot of smgr.c/md.c/fd.c code
is no longer needed and has been removed: there's no concept of a dirty
relation anymore in md.c/fd.c, and we never fsync anything but WAL.
Still TODO: improve local buffer management algorithms so that it would
be reasonable to increase NLocBuffer.
hardwired lists of index names for each catalog, use the relcache's
mechanism for caching lists of OIDs of indexes of any table. This
reduces the common case of updating system catalog indexes to a single
line, makes it much easier to add a new system index (in fact, you
can now do so on-the-fly if you want to), and as a nice side benefit
improves performance a little. Per recent pghackers discussion.
all places, where pd_linp is accessed. Also introduce new macros
SizeOfPageHeaderData and BTMaxItemSize. This is just source code
cosmetic, no behaviour changed.
Manfred Koizar
lines of code into internal routines (drop_relfilenode_buffers,
release_buffer) and by hiding unused routines (PrintBufferDescs,
PrintPinnedBufs) behind #ifdef NOT_USED. Remove AbortBufferIO()
declaration from bufmgr.c (already declared in bufmgr.h)
Manfred Koizar
> Changes to avoid collisions with WIN32 & MFC names...
> 1. Renamed:
> a. PROC => PGPROC
> b. GetUserName() => GetUserNameFromId()
> c. GetCurrentTime() => GetCurrentDateTime()
> d. IGNORE => IGNORE_DTF in include/utils/datetime.h & utils/adt/datetim
>
> 2. Added _P to some lex/yacc tokens:
> CONST, CHAR, DELETE, FLOAT, GROUP, IN, OUT
Jan
transaction, so as to avoid returning them out of the index AM. Saves
repeated heap_fetch operations on frequently-updated rows. Also detect
queries on unique keys (equality to all columns of a unique index), and
don't bother continuing scan once we have found first match.
Killing is implemented in the btree and hash AMs, but not yet in rtree
or gist, because there isn't an equally convenient place to do it in
those AMs (the outer amgetnext routine can't do it without re-pinning
the index page).
Did some small cleanup on APIs of HeapTupleSatisfies, heap_fetch, and
index_insert to make this a little easier.
in snapshots, per my proposal of a few days ago. Also, tweak heapam.c
routines (heap_insert, heap_update, heap_delete, heap_mark4update) to
be passed the command ID to use, instead of doing GetCurrentCommandID.
For catalog updates they'll still get passed current command ID, but
for updates generated from the main executor they'll get passed the
command ID saved in the snapshot the query is using. This should fix
some corner cases associated with functions and triggers that advance
current command ID while an outer query is still in progress.
yesterday's proposal to pghackers. Also remove unnecessary parameters
to heap_beginscan, heap_rescan. I modified pg_proc.h to reflect the
new numbers of parameters for the AM interface routines, but did not
force an initdb because nothing actually looks at those fields.
As proof of concept, provide an alternate implementation based on POSIX
semaphores. Also push the SysV shared-memory implementation into a
separate file so that it can be replaced conveniently.
was in the thread "make BufferGetBlockNumber() a macro". Tom
objected to the original patch, so I prepared a new one which
doesn't change BufferGetBlockNumber() into a macro, it just
cleans up some comments and fixes an assertion. The patch
is attached.
Neil Conway
for Solaris on SPARC. Scott Brunza (sbrunza@sonalysts.com) gets
credit for identifying the issue, making the change, and doing
the regression tests.
Earlier testing on 7.2rc2 and 7.2 showed performance gains of
1% to 10% on pgbench, osdb-pg, and some locally developed apps.
Solaris Intimate Shared Memory is described in "SOLARIS INTERNALS
Core Kernel Components" by Jim Mauro and Richard McDougall,
Copyright 2001 Sun Microsystem, Inc. ISBN 0-13-022496-0
P.J. "Josh" Rovero
The patch enables the mips2 ISA for the ll/sc operations, and then restores
it when done. The kernel/libc emulation code will take over on CPUs without
ll/sc, and on CPUs with it, it'll use the operations provided by the CPU.
Combined with the earlier fix (removing -mips2), postgresql builds again on
mips and mipsel. The patch is against 7.2-7.
Oliver Elphick
o Change all current CVS messages of NOTICE to WARNING. We were going
to do this just before 7.3 beta but it has to be done now, as you will
see below.
o Change current INFO messages that should be controlled by
client_min_messages to NOTICE.
o Force remaining INFO messages, like from EXPLAIN, VACUUM VERBOSE, etc.
to always go to the client.
o Remove INFO from the client_min_messages options and add NOTICE.
Seems we do need three non-ERROR elog levels to handle the various
behaviors we need for these messages.
Regression passed.
now just below FATAL in server_min_messages. Added more text to
highlight ordering difference between it and client_min_messages.
---------------------------------------------------------------------------
REALLYFATAL => PANIC
STOP => PANIC
New INFO level the prints to client by default
New LOG level the prints to server log by default
Cause VACUUM information to print only to the client
NOTICE => INFO where purely information messages are sent
DEBUG => LOG for purely server status messages
DEBUG removed, kept as backward compatible
DEBUG5, DEBUG4, DEBUG3, DEBUG2, DEBUG1 added
DebugLvl removed in favor of new DEBUG[1-5] symbols
New server_min_messages GUC parameter with values:
DEBUG[5-1], INFO, NOTICE, ERROR, LOG, FATAL, PANIC
New client_min_messages GUC parameter with values:
DEBUG[5-1], LOG, INFO, NOTICE, ERROR, FATAL, PANIC
Server startup now logged with LOG instead of DEBUG
Remove debug_level GUC parameter
elog() numbers now start at 10
Add test to print error message if older elog() values are passed to elog()
Bootstrap mode now has a -d that requires an argument, like postmaster
removes any empty chunks, the chunk previously added won't be there
anymore, so it's possible there is zero free space in the rel's page list
afterwards. Must loop back and rerun the part that adds a chunk to
the list.
to prevent spreading of corruption when page header pointers are bad.
Merge PageZero into PageInit, since it was never used separately, and
remove separate memset calls used at most other PageInit call points.
Remove IndexPageCleanup, which wasn't used at all.
granted the lock when awakened; the signal now only means that the lock
is potentially available. The waiting process must retry its attempt
to get the lock when it gets to run. This allows the lock releasing
process to re-acquire the lock later in its timeslice. Since LWLocks
are usually held for short periods, it is possible for a process to
acquire and release the same lock many times in a timeslice. The old
spinlock-based implementation of these locks allowed for that; but the
original coding of LWLock would force a process swap for each acquisition
if there was any contention. Although this approach reopens the door to
process starvation (a waiter might repeatedly fail to get the lock),
the odds of that being a big problem seem low, and the performance cost
of the previous approach is considerable.
'volatile' pointers to access those structures, so that optimizing
compilers will not decide to move the structure accesses outside of the
spinlock-acquire-to-spinlock-release sequence. There are no known bugs
in these uses at present, but based on bad experience with lwlock.c,
it seems prudent to ensure that we protect these other uses too.
Per pghackers discussion around 12-Dec. (Note: it should not be
necessary to worry about structures protected by LWLocks, since the
LWLock acquire and release operations are not inline macros.)
should be accounted for in the PROC_SEM_MAP_ENTRIES() macro. Otherwise
the ports that rely on this macro to size data structures are broken.
Mea culpa.
so that only one signal number is used not three. Flags in shared
memory tell the reason(s) for the current signal. This method is
extensible to handle more signal reasons without chewing up even more
signal numbers, but the immediate reason is to keep pg_pwd reloads
separate from SIGHUP processing in the postmaster.
Also clean up some problems in the postmaster with delayed response to
checkpoint status changes --- basically, it wouldn't schedule a checkpoint
if it wasn't getting connection requests on a regular basis.
never overwrite adjacent pages with copied data, even if page header
and/or item pointers are already corrupt. Change inspired by trouble
report from Alvaro Herrera.
readability. Bizarre '(long *) TRUE' return convention is gone,
in favor of just raising an error internally in dynahash.c when
we detect hashtable corruption. HashTableWalk is gone, in favor
of using hash_seq_search directly, since it had no hope of working
with non-LONGALIGNable datatypes. Simplify some other code that was
made undesirably grotty by promixity to HashTableWalk.
portability issues). Caller-visible data structures are now allocated
on MAXALIGN boundaries, allowing safe use of datatypes wider than 'long'.
Rejigger hash_create API so that caller specifies size of key and
total size of entry, not size of key and size of rest of entry.
This simplifies life considerably since each number is just a sizeof(),
and padding issues etc. are taken care of automatically.
upper limit on what we will believe from sysconf(_SC_OPEN_MAX). The
default value is 1000, so that under ordinary conditions it won't
affect the behavior. But on platforms where the kernel promises far
more than it can deliver, this can be used to prevent running out of
file descriptors. See numerous past discussions, eg, pgsql-hackers
around 23-Dec-2000.