At one point in the development of this feature, it was claimed that
allowing negative values would be useful to compensate for timezone
differences between master and slave servers. That was based on a mistaken
assumption that commit timestamps are recorded in local time; but of course
they're in UTC. Nor is a negative apply delay likely to be a sane way of
coping with server clock skew. However, the committed patch still treated
negative delays as doing something, and the timezone misapprehension
survived in the user documentation as well.
If recovery_min_apply_delay were a proper GUC we'd just set the minimum
allowed value to be zero; but for the moment it seems better to treat
negative settings as if they were zero.
In passing do some extra wordsmithing on the parameter's documentation,
including correcting a second misstatement that the parameter affects
processing of Restore Point records.
Issue noted by Michael Paquier, who also provided the code patch; doc
changes by me. Back-patch to 9.4 where the feature was introduced.
XLogFileInit() returns a file descriptor, which needs to be closed. The leak
was short-lived, since the startup process exits shortly afterwards, but it
was clearly a bug, nevertheless.
Per Coverity report.
We used time(null) to set a TimestampTz field, which gave bogus results.
Noticed while looking at pg_xlogdump output.
Backpatch to 9.3 and above, where the fast promotion was introduced.
Two changes:
1. When copying a WAL segment from old timeline to create the first segment
on the new timeline, only copy up to the point where the timeline switch
happens, and zero-fill the rest. This avoids corner cases where we might
think that the copied WAL from the previous timeline belong to the new
timeline.
2. If the timeline switch happens at a segment boundary, don't copy the
whole old segment to the new timeline. It's pointless, because it's 100%
identical to the old segment.
When starting up from a basebackup taken off a standby extra logic has
to be applied to compute the point where the data directory is
consistent. Normal base backups use a WAL record for that purpose, but
that isn't possible on a standby.
That logic had a error check ensuring that the cluster's control file
indicates being in recovery. Unfortunately that check was too strict,
disregarding the fact that the control file could also indicate that
the cluster was shut down while in recovery.
That's possible when the a cluster starting from a basebackup is shut
down before the backup label has been removed. When everything goes
well that's a short window, but when either restore_command or
primary_conninfo isn't configured correctly the window can get much
wider. That's because inbetween reading and unlinking the label we
restore the last checkpoint from WAL which can need additional WAL.
To fix simply also allow starting when the control file indicates
"shutdown in recovery". There's nicer fixes imaginable, but they'd be
more invasive.
Backpatch to 9.2 where support for taking basebackups from standbys
was added.
Rename parameter action_at_recovery_target to
recovery_target_action suggested by Christoph Berg.
Place into recovery.conf suggested by Fujii Masao,
replacing (deprecating) earlier parameters, per
Michael Paquier.
Transactions can now set their commit timestamp directly as they commit,
or an external transaction commit timestamp can be fed from an outside
system using the new function TransactionTreeSetCommitTsData(). This
data is crash-safe, and truncated at Xid freeze point, same as pg_clog.
This module is disabled by default because it causes a performance hit,
but can be enabled in postgresql.conf requiring only a server restart.
A new test in src/test/modules is included.
Catalog version bumped due to the new subdirectory within PGDATA and a
couple of new SQL functions.
Authors: Álvaro Herrera and Petr Jelínek
Reviewed to varying degrees by Michael Paquier, Andres Freund, Robert
Haas, Amit Kapila, Fujii Masao, Jaime Casanova, Simon Riggs, Steven
Singer, Peter Eisentraut
InitXLogInsert() cannot be called in a critical section, because it
allocates memory. But CreateCheckPoint() did that, when called for the
end-of-recovery checkpoint by the startup process.
In the passing, fix the scratch space allocation in InitXLogInsert to go to
the right memory context. Also update the comment at InitXLOGAccess, which
hasn't been totally accurate since hot standby was introduced (in a hot
standby backend, InitXLOGAccess isn't called at backend startup).
Reported by Michael Paquier
Add a new XLOG_FPI_FOR_HINT record type, and use that for full-page images
generated for hint bit updates, when checksums are enabled. The new record
type is replayed exactly the same as XLOG_FPI, but allows them to be tallied
separately e.g. in pg_xlogdump.
Each WAL record now carries information about the modified relation and
block(s) in a standardized format. That makes it easier to write tools that
need that information, like pg_rewind, prefetching the blocks to speed up
recovery, etc.
There's a whole new API for building WAL records, replacing the XLogRecData
chains used previously. The new API consists of XLogRegister* functions,
which are called for each buffer and chunk of data that is added to the
record. The new API also gives more control over when a full-page image is
written, by passing flags to the XLogRegisterBuffer function.
This also simplifies the XLogReadBufferForRedo() calls. The function can dig
the relation and block number from the WAL record, so they no longer need to
be passed as arguments.
For the convenience of redo routines, XLogReader now disects each WAL record
after reading it, copying the main data part and the per-block data into
MAXALIGNed buffers. The data chunks are not aligned within the WAL record,
but the redo routines can assume that the pointers returned by XLogRecGet*
functions are. Redo routines are now passed the XLogReaderState, which
contains the record in the already-disected format, instead of the plain
XLogRecord.
The new record format also makes the fixed size XLogRecord header smaller,
by removing the xl_len field. The length of the "main data" portion is now
stored at the end of the WAL record, and there's a separate header after
XLogRecord for it. The alignment padding at the end of XLogRecord is also
removed. This compansates for the fact that the new format would otherwise
be more bulky than the old format.
Reviewed by Andres Freund, Amit Kapila, Michael Paquier, Alvaro Herrera,
Fujii Masao.
Unlogged relations are reset at the end of crash recovery as they're
only synced to disk during a proper shutdown. Unfortunately that and
later steps can fail, e.g. due to running out of space. This reset
was, up to now performed after marking the database as having finished
crash recovery successfully. As out of space errors trigger a crash
restart that could lead to the situation that not all unlogged
relations are reset.
Once that happend usage of unlogged relations could yield errors like
"could not open file "...": No such file or directory". Luckily
clusters that show the problem can be fixed by performing a immediate
shutdown, and starting the database again.
To fix, just call ResetUnloggedRelations(UNLOGGED_RELATION_INIT)
earlier, before marking the database as having successfully recovered.
Discussion: 20140912112246.GA4984@alap3.anarazel.de
Backpatch to 9.1 where unlogged tables were introduced.
Abhijit Menon-Sen and Andres Freund
Now that the backup blocks are appended to the WAL record in xloginsert.c,
XLogInsert doesn't see them anymore and cannot remove them from the version
reconstructed for xlog_outdesc. This makes running with wal_debug=on more
expensive, as we now make (unnecessary) temporary copies of the backup
blocks, but it doesn't seem worth convoluting the code to keep that
optimization.
Reported by Alvaro Herrera.
xlog.c is huge, this makes it a little bit smaller, which is nice. Functions
related to putting together the WAL record are in xloginsert.c, and the
lower level stuff for managing WAL buffers and such are in xlog.c.
Also move the definition of XLogRecord to a separate header file. This
causes churn in the #includes of all the files that write WAL records, and
redo routines, but it avoids pulling in xlog.h into most places.
Reviewed by Michael Paquier, Alvaro Herrera, Andres Freund and Amit Kapila.
The old algorithm was found to not be the usual CRC-32 algorithm, used by
Ethernet et al. We were using a non-reflected lookup table with code meant
for a reflected lookup table. That's a strange combination that AFAICS does
not correspond to any bit-wise CRC calculation, which makes it difficult to
reason about its properties. Although it has worked well in practice, seems
safer to use a well-known algorithm.
Since we're changing the algorithm anyway, we might as well choose a
different polynomial. The Castagnoli polynomial has better error-correcting
properties than the traditional CRC-32 polynomial, even if we had
implemented it correctly. Another reason for picking that is that some new
CPUs have hardware support for calculating CRC-32C, but not CRC-32, let
alone our strange variant of it. This patch doesn't add any support for such
hardware, but a future patch could now do that.
The old algorithm is kept around for tsquery and pg_trgm, which use the
values in indexes that need to remain compatible so that pg_upgrade works.
While we're at it, share the old lookup table for CRC-32 calculation
between hstore, ltree and core. They all use the same table, so might as
well.
Previously the archive recovery always created .ready file for
the last WAL file of the old timeline at the end of recovery even when
it's restored from the archive and has .done file. That is, there was
the case where the WAL file had both .ready and .done files.
This caused the already-archived WAL file to be archived again.
This commit prevents the archive recovery from creating .ready file
for the last WAL file if it has .done file, in order to prevent it from
being archived again.
This bug was added when cascading replication feature was introduced,
i.e., the commit 5286105800.
So, back-patch to 9.2, where cascading replication was added.
Reviewed by Michael Paquier
The duplication originated in cdd46c765, where restartpoints were
introduced.
In LogCheckpointStart's case the duplication actually lead to the
compiler's format string checking not to be effective because the
format string wasn't constant.
Arguably these messages shouldn't be elog(), but ereport() style
messages. That'd even allow to translate the messages... But as
there's more mistakes of that kind in surrounding code, it seems
better to change that separately.
Commit 7dbb606938 added a new CHECKPOINT_FLUSH_ALL flag. As that
commit needed to be backpatched I didn't change the numeric values of
the existing flags as that could lead to nastly problems if any
external code issued checkpoints. That's not a concern on master, so
renumber them there.
Also add a comment about CHECKPOINT_FLUSH_ALL above
CreateCheckPoint().
CREATE DATABASE and ALTER DATABASE .. SET TABLESPACE copy the source
database directory on the filesystem level. To ensure the on disk
state is consistent they block out users of the affected database and
force a checkpoint to flush out all data to disk. Unfortunately, up to
now, that checkpoint didn't flush out dirty buffers from unlogged
relations.
That bug means there could be leftover dirty buffers in either the
template database, or the database in its old location. Leading to
problems when accessing relations in an inconsistent state; and to
possible problems during shutdown in the SET TABLESPACE case because
buffers belonging files that don't exist anymore are flushed.
This was reported in bug #10675 by Maxim Boguk.
Fix by Pavan Deolasee, modified somewhat by me. Reviewed by MauMau and
Fujii Masao.
Backpatch to 9.1 where unlogged tables were introduced.
I left the GUC in place for the beta period, so that people could experiment
with different values. No-one's come up with any data that a different value
would be better under some circumstances, so rather than try to document to
users what the GUC, let's just hard-code the current value, 8.
As noted in http://bugs.debian.org/763098 there is a conflict between
postgres' definition of CACHE_LINE_SIZE and the definition by various
*bsd platforms. It's debatable who has the right to define such a
name, but postgres' use was only introduced in 375d8526f2 (9.4), so
it seems like a good idea to rename it.
Discussion: 20140930195756.GC27407@msg.df7cb.de
Per complaint of Christoph Berg in the above email, although he's not
the original bug reporter.
Backpatch to 9.4 where the define was introduced.
For the reason outlined in df4077cda2 also remove volatile qualifiers
from xlog.c. Some of these uses of volatile have been added after
noticing problems back when spinlocks didn't imply compiler
barriers. So they are a good test - in fact removing the volatiles
breaks when done without the barriers in spinlocks present.
Several uses of volatile remain where they are explicitly used to
access shared memory without locks. These locations are ok with
slightly out of date data, but removing the volatile might lead to the
variables never being reread from memory. These uses could also be
replaced by barriers, but that's a separate change of doubtful value.
There are four weaknesses in728f152e07f998d2cb4fe5f24ec8da2c3bda98f2:
* append_init() in heapdesc.c was ugly and required that rm_identify
return values are only valid till the next call. Instead just add a
couple more switch() cases for the INIT_PAGE cases. Now the returned
value will always be valid.
* a couple rm_identify() callbacks missed masking xl_info with
~XLR_INFO_MASK.
* pg_xlogdump didn't map a NULL rm_identify to UNKNOWN or a similar
string.
* append_init() was called when id=NULL - which should never actually
happen. But it's better to be careful.
This is primarily useful for the upcoming pg_xlogdump --stats feature,
but also allows to remove some duplicated code in the rmgr_desc
routines.
Due to the separation and harmonization, the output of dipsplayed
records changes somewhat. But since this isn't enduser oriented
content that's ok.
It's potentially desirable to further change pg_xlogdump's display of
records. It previously wasn't possible to show the record type
separately from the description forcing it to be in the last
column. But that's better done in a separate commit.
Author: Abhijit Menon-Sen, slightly editorialized by me
Reviewed-By: Álvaro Herrera, Andres Freund, and Heikki Linnakangas
Discussion: 20140604104716.GA3989@toroid.org
log_newpage is used by many indexams, in addition to heap, but for
historical reasons it's always been part of the heapam rmgr. Starting with
9.3, we have another WAL record type for logging an image of a page,
XLOG_FPI. Simplify things by moving log_newpage and log_newpage_buffer to
xlog.c, and switch to using the XLOG_FPI record type.
Bump the WAL version number because the code to replay the old HEAP_NEWPAGE
records is removed.
There were several oversights in recovery code where COMMIT/ABORT PREPARED
records were ignored:
* pg_last_xact_replay_timestamp() (wasn't updated for 2PC commits)
* recovery_min_apply_delay (2PC commits were applied immediately)
* recovery_target_xid (recovery would not stop if the XID used 2PC)
The first of those was reported by Sergiy Zuban in bug #11032, analyzed by
Tom Lane and Andres Freund. The bug was always there, but was masked before
commit d19bd29f07, because COMMIT PREPARED
always created an extra regular transaction that was WAL-logged.
Backpatch to all supported versions (older versions didn't have all the
features and therefore didn't have all of the above bugs).
Nothing in the checkpointer calls InitXLOGAccess(), so WALInsertLocks
never got initialized there. Without EXEC_BACKEND, it works anyway
because the correct value is inherited from the postmaster, but
with EXEC_BACKEND we've got a problem. The problem appears to have
been introduced by commit 68a2e52bba.
To fix, move the relevant initialization steps from InitXLOGAccess()
to XLOGShmemInit(), making this more parallel to what we do
elsewhere.
Amit Kapila
The assertion failed if WAL_DEBUG or LWLOCK_STATS was enabled; fix that by
using separate memory contexts for the allocations made within those code
blocks.
This patch introduces a mechanism for marking any memory context as allowed
in a critical section. Previously ErrorContext was exempt as a special case.
Instead of a blanket exception of the checkpointer process, only exempt the
memory context used for the pending ops hash table.
Instead of truncating pg_multixact at vacuum time, do it only at
checkpoint time. The reason for doing it this way is twofold: first, we
want it to delete only segments that we're certain will not be required
if there's a crash immediately after the removal; and second, we want to
do it relatively often so that older files are not left behind if
there's an untimely crash.
Per my proposal in
http://www.postgresql.org/message-id/20140626044519.GJ7340@eldon.alvh.no-ip.org
we now execute the truncation in the checkpointer process rather than as
part of vacuum. Vacuum is in only charge of maintaining in shared
memory the value to which it's possible to truncate the files; that
value is stored as part of checkpoints also, and so upon recovery we can
reuse the same value to re-execute truncate and reset the
oldest-value-still-safe-to-use to one known to remain after truncation.
Per bug reported by Jeff Janes in the course of his tests involving
bug #8673.
While at it, update some comments that hadn't been updated since
multixacts were changed.
Backpatch to 9.3, where persistency of pg_multixact files was
introduced by commit 0ac5ad5134.
Change the order of checks in similar functions to be the same; remove
a parameter that's not needed anymore; rename a memory context and
expand a couple of comments.
Per review comments from Amit Kapila
It's critical that the backend's idea of LOBLKSIZE match the way data has
actually been divided up in pg_largeobject. While we don't provide any
direct way to adjust that value, doing so is a one-line source code change
and various people have expressed interest recently in changing it. So,
just as with TOAST_MAX_CHUNK_SIZE, it seems prudent to record the value in
pg_control and cross-check that the backend's compiled-in setting matches
the on-disk data.
Also tweak the code in inv_api.c so that fetches from pg_largeobject
explicitly verify that the length of the data field is not more than
LOBLKSIZE. Formerly we just had Asserts() for that, which is no protection
at all in production builds. In some of the call sites an overlength data
value would translate directly to a security-relevant stack clobber, so it
seems worth one extra runtime comparison to be sure.
In the back branches, we can't change the contents of pg_control; but we
can still make the extra checks in inv_api.c, which will offer some amount
of protection against running with the wrong value of LOBLKSIZE.
Previously there's been a mix between 'slotname' and 'slot_name'. It's
not nice to be unneccessarily inconsistent in a new feature. As a post
beta1 initdb now is required in the wake of eeca4cd35e, fix the
inconsistencies.
Most the changes won't affect usage of replication slots because the
majority of changes is around function parameter names. The prominent
exception to that is that the recovery.conf parameter
'primary_slotname' is now named 'primary_slot_name'.
Per discussion, this seems like a more consistent choice of name.
Fabrízio de Royes Mello, after a suggestion by Peter Eisentraut;
some additional documentation wordsmithing by me
As noted some time ago, the original coding had a typo ("|" for "^")
that made the result less unique than intended. Even the intended
behavior is obsolete since it was based on wanting to produce a
usable value even if we didn't have int64 arithmetic --- a limitation
we stopped supporting years ago. Instead, let's redefine the system
identifier as tv_sec in the upper 32 bits (same as before), tv_usec
in the next 20 bits, and the low 12 bits of getpid() in the remaining
bits. This is still hardly guaranteed-universally-unique, but it's
noticeably better than before. Per my proposal at
<29019.1374535940@sss.pgh.pa.us>
I mixed up BLCKSZ and XLOG_BLCKSZ when I changed the way the buffer is
allocated a couple of weeks ago. With the default settings, they are both
8k, but they can be changed at compile-time.
GetVirtualXIDsDelayingChkpt calls palloc, which isn't safe in a critical
section. I thought I covered this case with the exemption for the
checkpointer, but CreateCheckPoint is also called from the startup process.
If you compile with WAL_DEBUG and enable it with wal_debug=on, we used to
only pass the first XLogRecData entry to the rm_desc routine. I think the
original assumprion was that the first XLogRecData entry contains all the
necessary information for the rm_desc routine, but that's a pretty shaky
assumption. At least standby_redo didn't get the memo.
To fix, piece together all the data in a temporary buffer, and pass that to
the rm_desc routine.
It's been like this forever, but the patch didn't apply cleanly to
back-branches. Probably wouldn't be hard to fix the conflicts, but it's
not worth the trouble.
The special feature the XLogInsert slots had over regular LWLocks is the
insertingAt value that was updated atomically with releasing backends
waiting on it. Add new functions to the LWLock API to do that, and replace
the slots with LWLocks. This reduces the amount of duplicated code.
(There's still some duplication, but at least it's all in lwlock.c now.)
Reviewed by Andres Freund.
It is no longer used, none of the resource managers have multi-record
actions that would make it unsafe to perform a restartpoint.
Also don't allow rm_cleanup to write WAL records, it's also no longer
required. Move the call to rm_cleanup routines to make it more symmetric
with rm_startup.
When a row is updated, and the new tuple version is put on the same page as
the old one, only WAL-log the part of the new tuple that's not identical to
the old. This saves significantly on the amount of WAL that needs to be
written, in the common case that most fields are not modified.
Amit Kapila, with a lot of back and forth with me, Robert Haas, and others.
CheckRequiredParameterValues() should perform the checks if archive recovery
was requested, even if we are going to perform crash recovery first.
Reported by Kyotaro HORIGUCHI. Backpatch to 9.2, like the crash-then-archive
recovery mode.
When entering crash recovery followed by archive recovery, and the latest
checkpoint is a shutdown checkpoint, and there are no more WAL records to
replay before transitioning from crash to archive recovery, we would not
immediately allow read-only connections in hot standby mode even if we
could. That's because when starting from a shutdown checkpoint, we set
lastReplayedEndRecPtr incorrectly to the record before the checkpoint
record, instead of the checkpoint record itself. We don't run the redo
routine of the shutdown checkpoint record, but starting recovery from it
goes through the same motions, so it should be considered as replayed.
Reported by Kyotaro HORIGUCHI. All versions with hot standby are affected,
so backpatch to 9.0.
This feature, building on previous commits, allows the write-ahead log
stream to be decoded into a series of logical changes; that is,
inserts, updates, and deletes and the transactions which contain them.
It is capable of handling decoding even across changes to the schema
of the effected tables. The output format is controlled by a
so-called "output plugin"; an example is included. To make use of
this in a real replication system, the output plugin will need to be
modified to produce output in the format appropriate to that system,
and to perform filtering.
Currently, information can be extracted from the logical decoding
system only via SQL; future commits will add the ability to stream
changes via walsender.
Andres Freund, with review and other contributions from many other
people, including Álvaro Herrera, Abhijit Menon-Sen, Peter Gheogegan,
Kevin Grittner, Robert Haas, Heikki Linnakangas, Fujii Masao, Abhijit
Menon-Sen, Michael Paquier, Simon Riggs, Craig Ringer, and Steve
Singer.
Commit abf5c5c9a4 added a bogus while-
statement after the for(;;)-loop. It went unnoticed in testing, because
it was dead code.
Report by KONDO Mitsumasa. Backpatch to 9.3. The commit that introduced
this was also applied to 9.2, but not the bogus while-loop part, because
the code in 9.2 looks quite different.
Coverity identified a number of places in which it couldn't prove that a
string being copied into a fixed-size buffer would fit. We believe that
most, perhaps all of these are in fact safe, or are copying data that is
coming from a trusted source so that any overrun is not really a security
issue. Nonetheless it seems prudent to forestall any risk by using
strlcpy() and similar functions.
Fixes by Peter Eisentraut and Jozef Mlich based on Coverity reports.
In addition, fix a potential null-pointer-dereference crash in
contrib/chkpass. The crypt(3) function is defined to return NULL on
failure, but chkpass.c didn't check for that before using the result.
The main practical case in which this could be an issue is if libc is
configured to refuse to execute unapproved hashing algorithms (e.g.,
"FIPS mode"). This ideally should've been a separate commit, but
since it touches code adjacent to one of the buffer overrun changes,
I included it in this commit to avoid last-minute merge issues.
This issue was reported by Honza Horak.
Security: CVE-2014-0065 for buffer overruns, CVE-2014-0066 for crypt()
If there is a WAL segment with same ID but different TLI present in both
the WAL archive and pg_xlog, prefer the one with higher TLI. Before this
patch, the archive was polled first, for all expected TLIs, and only if no
file was found was pg_xlog scanned. This was a change in behavior from 9.3,
which first scanned archive and pg_xlog for the highest TLI, then archive
and pg_xlog for the next highest TLI and so forth. This patch reverts the
behavior back to what it was in 9.2.
The reason for this is that if for example you try to do archive recovery
to timeline 2, which branched off timeline 1, but the WAL for timeline 2 is
not archived yet, we would replay past the timeline switch point on
timeline 1 using the archived files, before even looking timeline 2's files
in pg_xlog
Report and patch by Kyotaro Horiguchi. Backpatch to 9.3 where the behavior
was changed.
WakeupWaiters() is supposed to wake up all LW_WAIT_UNTIL_FREE waiters of
the slot, but the loop incorrectly also woke up the first LW_EXCLUSIVE
waiter, if there was no LW_WAIT_UNTIL_FREE waiters in the queue.
Noted by Andres Freund. This code is new in 9.4, so no backpatching.
Replication slots are a crash-safe data structure which can be created
on either a master or a standby to prevent premature removal of
write-ahead log segments needed by a standby, as well as (with
hot_standby_feedback=on) pruning of tuples whose removal would cause
replication conflicts. Slots have some advantages over existing
techniques, as explained in the documentation.
In a few places, we refer to the type of replication slots introduced
by this patch as "physical" slots, because forthcoming patches for
logical decoding will also have slots, but with somewhat different
properties.
Andres Freund and Robert Haas
This allows ending recovery as a consistent state has been reached. Without
this, there was no easy way to e.g restore an online backup, without
replaying any extra WAL after the backup ended.
MauMau and me.
Since C99, it's been standard for printf and friends to accept a "z" size
modifier, meaning "whatever size size_t has". Up to now we've generally
dealt with printing size_t values by explicitly casting them to unsigned
long and using the "l" modifier; but this is really the wrong thing on
platforms where pointers are wider than longs (such as Win64). So let's
start using "z" instead. To ensure we can do that on all platforms, teach
src/port/snprintf.c to understand "z", and add a configure test to force
use of that implementation when the platform's version doesn't handle "z".
Having done that, modify a bunch of places that were using the
unsigned-long hack to use "z" instead. This patch doesn't pretend to have
gotten everyplace that could benefit, but it catches many of them. I made
an effort in particular to ensure that all uses of the same error message
text were updated together, so as not to increase the number of
translatable strings.
It's possible that this change will result in format-string warnings from
pre-C99 compilers. We might have to reconsider if there are any popular
compilers that will warn about this; but let's start by seeing what the
buildfarm thinks.
Andres Freund, with a little additional work by me
In ordinary operation, VACUUM must be careful to take a cleanup lock on
each leaf page of a btree index; this ensures that no indexscans could
still be "in flight" to heap tuples due to be deleted. (Because of
possible index-tuple motion due to concurrent page splits, it's not enough
to lock only the pages we're deleting index tuples from.) In Hot Standby,
the WAL replay process must likewise lock every leaf page. There were
several bugs in the code for that:
* The replay scan might come across unused, all-zero pages in the index.
While btree_xlog_vacuum itself did the right thing (ie, nothing) with
such pages, xlogutils.c supposed that such pages must be corrupt and
would throw an error. This accounts for various reports of replication
failures with "PANIC: WAL contains references to invalid pages". To
fix, add a ReadBufferMode value that instructs XLogReadBufferExtended
not to complain when we're doing this.
* btree_xlog_vacuum performed the extra locking if standbyState ==
STANDBY_SNAPSHOT_READY, but that's not the correct test: we won't open up
for hot standby queries until the database has reached consistency, and
we don't want to do the extra locking till then either, for fear of reading
corrupted pages (which bufmgr.c would complain about). Fix by exporting a
new function from xlog.c that will report whether we're actually in hot
standby replay mode.
* To ensure full coverage of the index in the replay scan, btvacuumscan
would emit a dummy WAL record for the last page of the index, if no
vacuuming work had been done on that page. However, if the last page
of the index is all-zero, that would result in corruption of said page,
since the functions called on it weren't prepared to handle that case.
There's no need to lock any such pages, so change the logic to target
the last normal leaf page instead.
The first two of these bugs were diagnosed by Andres Freund, the other one
by me. Fixes based on ideas from Heikki Linnakangas and myself.
This has been wrong since Hot Standby was introduced, so back-patch to 9.0.
Makes the replay loop slightly more readable, by separating the concerns of
whether to stop and whether to delay, and how to extract the timestamp from
a record.
This has the user-visible change that the timestamp of the last applied
record is now updated after actually applying it. Before, it was updated
just before applying it. That meant that pg_last_xact_replay_timestamp()
could return the timestamp of a commit record that is in process of being
replayed, but not yet applied. Normally the difference is small, but if
min_recovery_apply_delay is set, there could be a significant delay between
reading a record and applying it.
Another behavioral change is that if you recover to a restore point, we stop
after the restore point record, not before it. It makes no difference as far
as running queries on the server is concerned, as applying a restore point
record changes nothing, but if examine the timeline history you will see
that the new timeline branched off just after the restore point record, not
before it. One practical consequence is that if you do PITR to the new
timeline, and set recovery target to the same named restore point again, it
will find and stop recovery at the same restore point. Conceptually, I think
it makes more sense to consider the restore point as part of the new
timeline's history than not.
In principle, setting the last-replayed timestamp before actually applying
the record was a bug all along, but it doesn't seem worth the risk to
backpatch, since min_recovery_apply_delay was only added in 9.4.
If pause_at_recovery_target is set, recovery pauses *before* applying the
target record, even if recovery_target_inclusive is set. If you then
continue with pg_xlog_replay_resume(), it will apply the target record
before ending recovery. In other words, if you log in while it's paused
and verify that the database looks OK, ending recovery changes its state
again, possibly destroying data that you were tring to salvage with PITR.
Backpatch to 9.1, this has been broken since pause_at_recovery_target was
added.
The docs say that only one of recovery_target_xid, recovery_target_time, or
recovery_target_name can be specified. But the code actually did something
different, so that a name overrode time, and xid overrode both time and name.
Now the target specified last takes effect, whether it's an xid, time or
name.
With this patch, we still accept multiple recovery_target settings, even
though docs say that only one can be specified. It's a general property of
the recovery.conf file parser that you if you specify the same option twice,
the last one takes effect, like with postgresql.conf.
When starting WAL replay from an online checkpoint, the last replayed WAL
record variable was initialized using the checkpoint record's location, even
though the records between the REDO location and the checkpoint record had
not been replayed yet. That was noted as "slightly confusing" but harmless
in the comment, but in some cases, it fooled CheckRecoveryConsistency to
incorrectly conclude that we had already reached a consistent state
immediately at the beginning of WAL replay. That caused the system to accept
read-only connections in hot standby mode too early, and also PANICs with
message "WAL contains references to invalid pages".
Fix by initializing the variables to the REDO location instead.
In 9.2 and above, change CheckRecoveryConsistency() to use
lastReplayedEndRecPtr variable when checking if backup end location has
been reached. It was inconsistently using EndRecPtr for that check, but
lastReplayedEndRecPtr when checking min recovery point. It made no
difference before this patch, because in all the places where
CheckRecoveryConsistency was called the two variables were the same, but
it was always an accident waiting to happen, and would have been wrong
after this patch anyway.
Report and analysis by Tomonari Katsumata, bug #8686. Backpatch to 9.0,
where hot standby was introduced.
And the same for do_pg_stop_backup. The code in do_pg_* is not allowed
to access the catalogs. For manual base backups, the permissions
check can be handled in the calling function, and for streaming
base backups only users with the required permissions can get past
the authentication step in the first place.
Reported by Antonin Houska, diagnosed by Andres Freund
WAL records of hint bit updates is useful to tools that want to examine
which pages have been modified. In particular, this is required to make
the pg_rewind tool safe (without checksums).
This can also be used to test how much extra WAL-logging would occur if
you enabled checksums, without actually enabling them (which you can't
currently do without re-initdb'ing).
Sawada Masahiko, docs by Samrat Revagade. Reviewed by Dilip Kumar, with
further changes by me.
Set min_recovery_apply_delay to force a delay in recovery apply for commit and
restore point WAL records. Other records are replayed immediately. Delay is
measured between WAL record time and local standby time.
Robert Haas, Fabrízio de Royes Mello and Simon Riggs
Detailed review by Mitsumasa Kondo
When wal_level=logical, we'll log columns from the old tuple as
configured by the REPLICA IDENTITY facility added in commit
07cacba983. This makes it possible
a properly-configured logical replication solution to correctly
follow table updates even if they change the chosen key columns,
or, with REPLICA IDENTITY FULL, even if the table has no key at
all. Note that updates which do not modify the replica identity
column won't log anything extra, making the choice of a good key
(i.e. one that will rarely be changed) important to performance
when wal_level=logical is configured.
Each insert, update, or delete to a catalog table will also log
the CMIN and/or CMAX values of stamped by the current transaction.
This is necessary because logical decoding will require access to
historical snapshots of the catalog in order to decode some data
types, and the CMIN/CMAX values that we may need in order to judge
row visibility may have been overwritten by the time we need them.
Andres Freund, reviewed in various versions by myself, Heikki
Linnakangas, KONDO Mitsumasa, and many others.
Commit 9dc842f08 of 8.2 era prevented MultiXact truncation during crash
recovery, because there was no guarantee that enough state had been
setup, and because it wasn't deemed to be a good idea to remove data
during crash recovery anyway. Since then, due to Hot-Standby, streaming
replication and PITR, the amount of time a cluster can spend doing crash
recovery has increased significantly, to the point that a cluster may
even never come out of it. This has made not truncating the content of
pg_multixact/ not defensible anymore.
To fix, take care to setup enough state for multixact truncation before
crash recovery starts (easy since checkpoints contain the required
information), and move the current end-of-recovery actions to a new
TrimMultiXact() function, analogous to TrimCLOG().
At some later point, this should probably done similarly to the way
clog.c is doing it, which is to just WAL log truncations, but we can't
do that for the back branches.
Back-patch to 9.0. 8.4 also has the problem, but since there's no hot
standby there, it's much less pressing. In 9.2 and earlier, this patch
is simpler than in newer branches, because multixact access during
recovery isn't required. Add appropriate checks to make sure that's not
happening.
Andres Freund
RecoveryIsInProgress() can be called very frequently. During normal
operation, it just checks a backend-local variable and returns quickly,
but during hot standby, it checks a spinlock-protected shared variable.
Those spinlock acquisitions can become a point of contention on a busy
hot standby system.
Replace the spinlock acquisition with a memory barrier.
Per discussion with Andres Freund, Ants Aasma and Merlin Moncure.
The TYPEALIGN macro, and the related ones like MAXALIGN, don't work with
values larger than intptr_t, because TYPEALIGN casts the argument to
intptr_t to do the arithmetic. That's not a problem when dealing with
pointers or lengths or offsets related to pointers, but the XLogInsert
scaling patch added a call to MAXALIGN with an XLogRecPtr argument.
To fix, add wider variants of the macros, called TYPEALIGN64 and MAXALIGN64,
which are just like the existing variants but work with uint64 instead of
intptr_t.
Report and patch by David Rowley, analysis by Andres Freund.
This reverts commit 269e780822
and commit 5b571bb8c8.
Unfortunately, the initial patch had insufficient performance testing,
and resulted in a regression.
Per report by Thom Brown.
Performance testing shows that if the insertpos_lck spinlock and the fields
that it protects are on the same cache line with other variables that are
frequently accessed, the false sharing can hurt performance a lot. Keep
them apart by adding some padding.
This keeps the usual trigger file name unchanged from 9.2, avoiding nasty
issues if you use a pre-9.3 pg_ctl binary with a 9.3 server or vice versa.
The fallback behavior of creating a full checkpoint before starting up is now
triggered by a file called "fallback_promote". That can be useful for
debugging purposes, but we don't expect any users to have to resort to that
and we might want to remove that in the future, which is why the fallback
mechanism is undocumented.
Initialization of the first XLOG buffer at end-of-recovery was broken for
the case that the last read WAL record ended at a page boundary. Instead of
trying to copy the last full xlog page to the buffer cache in that case,
just set shared state so that the next page is initialized when the first
WAL record after startup is inserted. (that's what we did in earlier
version, too)
To make the shared state required for that case less surprising, replace the
XLogCtl->curridx variable, which was the index of the latest initialized
buffer, with an XLogRecPtr of how far the buffers have been initialized.
That also allows us to get rid of the XLogRecEndPtrToBufIdx macro.
While we're at it, make a similar change for XLogCtl->Write.curridx, getting
rid of that variable and calculating the next buffer to write from
XLogCtl->LogwrtResult instead.
Was broken by my xloginsert scaling patch. XLogCtl global variable needs
to be initialized in each process, as it's not inherited by fork() on
Windows.
This patch replaces WALInsertLock with a number of WAL insertion slots,
allowing multiple backends to insert WAL records to the WAL buffers
concurrently. This is particularly useful for parallel loading large amounts
of data on a system with many CPUs.
This has one user-visible change: switching to a new WAL segment with
pg_switch_xlog() now fills the remaining unused portion of the segment with
zeros. This potentially adds some overhead, but it has been a very common
practice by DBA's to clear the "tail" of the segment with an external
pg_clearxlogtail utility anyway, to make the WAL files compress better.
With this patch, it's no longer necessary to do that.
This patch adds a new GUC, xloginsert_slots, to tune the number of WAL
insertion slots. Performance testing suggests that the default, 8, works
pretty well for all kinds of worklods, but I left the GUC in place to allow
others with different hardware to test that easily. We might want to remove
that before release.
Reviewed by Andres Freund.
On some platforms, posix_fallocate() is available but may still return
EINVAL if the underlying filesystem does not support it. So, in case
of an error, fall through to the alternate implementation that just
writes zeros.
Per buildfarm failure and analysis by Tom Lane.
This function is more efficient than actually writing out zeroes to
the new file, per microbenchmarks by Jon Nelson. Also, it may reduce
the likelihood of WAL file fragmentation.
Jon Nelson, with review by Andres Freund, Greg Smith and me.
In 9.3, there's no particular limit on the number of bgworkers;
instead, we just count up the number that are actually registered,
and use that to set MaxBackends. However, that approach causes
problems for Hot Standby, which needs both MaxBackends and the
size of the lock table to be the same on the standby as on the
master, yet it may not be desirable to run the same bgworkers in
both places. 9.3 handles that by failing to notice the problem,
which will probably work fine in nearly all cases anyway, but is
not theoretically sound.
A further problem with simply counting the number of registered
workers is that new workers can't be registered without a
postmaster restart. This is inconvenient for administrators,
since bouncing the postmaster causes an interruption of service.
Moreover, there are a number of applications for background
processes where, by necessity, the background process must be
started on the fly (e.g. parallel query). While this patch
doesn't actually make it possible to register new background
workers after startup time, it's a necessary prerequisite.
Patch by me. Review by Michael Paquier.
We don't normally bother retrying when the number of bytes written by
write() is short of what was requested. It is generally assumed that a
write() to disk doesn't return short, unless you run out of disk space.
While writing the WAL, however, it seems prudent to try a bit harder,
because a failure leads to PANIC. The write() is also much larger than most
write()s in the backend (up to wal_buffers), so there's more room for
surprises.
Also retry on EINTR. All signals used in the backend are flagged SA_RESTART
nowadays, so it shouldn't happen, but better to be defensive.
In some cases with higher numbers of subtransactions
it was possible for us to incorrectly initialize
subtrans leading to complaints of missing pages.
Bug report by Sergey Konoplev
Analysis and fix by Andres Freund
MarkBufferDirtyHint() writes WAL, and should know if it's got a
standard buffer or not. Currently, the only callers where buffer_std
is false are related to the FSM.
In passing, rename XLOG_HINT to XLOG_FPI, which is more descriptive.
Back-patch to 9.3.
