If a view references a foreign table, and the foreign table has a
BEFORE INSERT trigger, then it's possible for a tuple inserted or
updated through the view to be changed such that it violates the
view's WITH CHECK OPTION constraint.
Before this commit, postgres_fdw handled this case inconsistently. A
RETURNING clause on the INSERT or UPDATE statement targeting the view
would cause the finally-inserted tuple to be read back, and the WITH
CHECK OPTION violation would throw an error. But without a RETURNING
clause, postgres_fdw would not read the final tuple back, and WITH
CHECK OPTION would not throw an error for the violation (or may throw
an error when there is no real violation). AFTER ROW triggers on the
foreign table had a similar effect as a RETURNING clause on the INSERT
or UPDATE statement.
To fix, this commit retrieves the attributes needed to enforce the
WITH CHECK OPTION constraint along with the attributes needed for the
RETURNING clause (if any) from the remote side. Thus, the WITH CHECK
OPTION constraint is always evaluated against the final tuple after
any triggers on the remote side.
This fix may be considered inconsistent with CHECK constraints
declared on foreign tables, which are not enforced locally at all
(because the constraint is on a remote object). The discussion
concluded that this difference is reasonable, because the WITH CHECK
OPTION is a constraint on the local view (not any remote object);
therefore it only makes sense to enforce its WITH CHECK OPTION
constraint locally.
Author: Etsuro Fujita
Reviewed-by: Arthur Zakirov, Stephen Frost
Discussion: https://www.postgresql.org/message-id/7eb58fab-fd3b-781b-ac33-f7cfec96021f%40lab.ntt.co.jp
When performing pg_rewind, the presence of a read-only file which is not
accessible for writes will cause a failure while processing. This can
cause the control file of the target data folder to be truncated,
causing it to not be reusable with a successive run.
Also, when pg_rewind fails mid-flight, there is likely no way to be able
to recover the target data folder anyway, in which case a new base
backup is the best option. A note is added in the documentation as
well about.
Reported-by: Christian H.
Author: Michael Paquier
Reviewed-by: Andrew Dunstan
Discussion: https://postgr.es/m/20180104200633.17004.16377%40wrigleys.postgresql.org
Prefer to use phrases like "child" instead of "partition" when
describing the legacy inheritance-based partitioning. The word
"partition" now has a fixed meaning for the built-in partitioning, so
keeping it out of the documentation of the old method makes things
clearer.
Author: Justin Pryzby <pryzby@telsasoft.com>
This section once started out small but has now grown quite a bit and
needs a bit of structure.
Rewrite as list, add documentation of EXCLUDING, and improve the
documentation of INCLUDING ALL instead of just listing all the options
again.
per report from Yugo Nagata that EXCLUDING was not documented, that part
reviewed by Daniel Gustafsson, most of the rewrite was by me
This has been visibly a forgotten spot in the first implementation of
wait events for I/O added by 249cf07, and what has been missing is a
fsync call for WAL segments which is a wrapper reacting on the value of
GUC wal_sync_method.
Reported-by: Konstantin Knizhnik
Author: Konstantin Knizhnik
Reviewed-by: Craig Ringer, Michael Paquier
Discussion: https://postgr.es/m/4a243897-0ad8-f471-aa40-242591f2476e@postgrespro.ru
When these programs call pg_catalog.set_config, they need to check for
PGRES_TUPLES_OK instead of PGRES_COMMAND_OK. Fix for
5770172cb0.
Reported-by: Ideriha, Takeshi <ideriha.takeshi@jp.fujitsu.com>
search.cpan.org has been EOL'd, with metacpan.org being the official
replacement to which URLs now redirect. Update links to match the new
URL. Also update links to CPAN to use https as it will redirect from
http.
Author: Daniel Gustafsson
Discussion: https://postgr.es/m/B74C0219-6BA9-46E1-A524-5B9E8CD3BDB3@yesql.se
The backup history file has been no longer necessary for recovery
since the version 9.0. It's now basically just for informational purpose.
But previously the documentations still described that a recovery
requests the backup history file to proceed. The commit fixes this
documentation bug.
Back-patch to all supported versions.
Author: Yugo Nagata
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/20180626174752.0ce505e3.nagata@sraoss.co.jp
Upper limits for vacuum_cleanup_index_scale_factor GUC and reloption
were initially set to 100.0 in 857f9c36. However, after further
discussion, it appears that some users like to disable B-tree cleanup
index scan completely (assuming there are no deleted pages).
vacuum_cleanup_index_scale_factor is used barely to protect against
stalled index statistics. And after detailed consideration it appears
that risk of stalled index statistics is low. And it would be nice to
allow advanced users setting higher values of
vacuum_cleanup_index_scale_factor. So, set upper limit for these
GUC and reloption to DBL_MAX.
Author: Alexander Korotkov
Reviewed-by: Masahiko Sawada
Discussion: https://postgr.es/m/CAC8Q8tJCb%3DgxhzcV7T6ctx7PY-Ux1oA-AsTJc6cAVNsQiYcCzA%40mail.gmail.com
vacuum_cleanup_index_scale_factor was located in autovacuum group of
GUCs. However, it affects not only autovacuum, but also manually run
VACUUM. It appears that "client connection defaults" group of GUCs
is more appropriate for vacuum_cleanup_index_scale_factor, because
vacuum_*_age options are already located there.
Also, vacuum_cleanup_index_scale_factor was missed in
postgresql.conf.sample. So, add it there with appropriate comment.
Author: Masahiko Sawada with minor editorization by me
Discussion: https://postgr.es/m/CAD21AoArsoXMLKudXSKN679FRzs6oubEchM53bHwn8Tp%3D2boNg%40mail.gmail.com
Pavel Stehule's original patch had support for default namespace, but I
ripped it out before commit -- hence the docs were correct when written,
and I broke them by omission :-(. Remove the offending phrase.
Author: Daniel Gustafsson
Discussion: https://postgr.es/m/1550C5E5-FC70-4493-A226-AA137D831E8D@yesql.se
PostgreSQL 11 introduces compress method for SP-GiST opclasses. That
was mistakenly interpreted as compression support for SP-GiST while
actually that allows lossy representation of leaf keys.
Author: Alexander Korotkov, based on proposal by Darafei Praliaskouski
Discussion: https://postgr.es/m/CAC8Q8tKbYmNdiyWr7hE4GfMY4fbqHKkFziKgrUuWHH6HJQs3og%40mail.gmail.com
Since their introduction, partition trees have been a bit lossy
regarding temporary relations. Inheritance trees respect the following
patterns:
1) a child relation can be temporary if the parent is permanent.
2) a child relation can be temporary if the parent is temporary.
3) a child relation cannot be permanent if the parent is temporary.
4) The use of temporary relations also imply that when both parent and
child need to be from the same sessions.
Partitions share many similar patterns with inheritance, however the
handling of the partition bounds make the situation a bit tricky for
case 1) as the partition code bases a lot of its lookup code upon
PartitionDesc which does not really look after relpersistence. This
causes for example a temporary partition created by session A to be
visible by another session B, preventing this session B to create an
extra partition which overlaps with the temporary one created by A with
a non-intuitive error message. There could be use-cases where mixing
permanent partitioned tables with temporary partitions make sense, but
that would be a new feature. Partitions respect 2), 3) and 4) already.
It is a bit depressing to see those error checks happening in
MergeAttributes() whose purpose is different, but that's left as future
refactoring work.
Back-patch down to 10, which is where partitioning has been introduced,
except that default partitions do not apply there. Documentation also
includes limitations related to the use of temporary tables with
partition trees.
Reported-by: David Rowley
Author: Amit Langote, Michael Paquier
Reviewed-by: Ashutosh Bapat, Amit Langote, Michael Paquier
Discussion: https://postgr.es/m/CAKJS1f94Ojk0og9GMkRHGt8wHTW=ijq5KzJKuoBoqWLwSVwGmw@mail.gmail.com
Postgres has traditionally considered the syntactic forms f(x) and x.f
to be equivalent, allowing tricks such as writing a function and then
using it as though it were a computed-on-demand column. However, our
behavior when both interpretations are feasible left something to be
desired: we always chose the column interpretation. This could lead
to very surprising results, as in a recent bug report from Neil Conway.
It also created a dump-and-reload hazard, since what was a function
call in a dumped view could get interpreted as a column reference
at reload, if a matching column name had been added to the underlying
table since the view was created.
What seems better, in ambiguous situations, is to prefer the choice
matching the syntactic form of the reference. This seems much less
astonishing in general, and it fixes the dump/reload hazard.
Although this could be called a bug fix, there have been few complaints
and there's some small risk of breaking applications that depend on the
old behavior, so no back-patch. It does seem reasonable to slip it
into v11, though.
Discussion: https://postgr.es/m/CAOW5sYa3Wp7KozCuzjOdw6PiOYPi6D=VvRybtH2S=2C0SVmRmA@mail.gmail.com
On Windows, it is sometimes important for corresponding malloc() and
free() calls to be made from the same DLL, since some build options can
result in multiple allocators being active at the same time. For that
reason we already provided PQfreemem(). This commit adds a similar
function for freeing string results allocated by the pgtypes library.
Author: Takayuki Tsunakawa
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/0A3221C70F24FB45833433255569204D1F8AD5D6%40G01JPEXMBYT05
Documentation of word_similarity() and strict_word_similarity() functions
contains some vague wordings which could confuse users. This patch makes
those wordings more clear. word_similarity() was introduced in PostgreSQL 9.6,
and corresponding part of documentation needs to be backpatched.
Author: Bruce Momjian, Alexander Korotkov
Discussion: https://postgr.es/m/20180526165648.GB12510%40momjian.us
Backpatch: 9.6, where word_similarity() was introduced
kern.ipc.shm_use_phys is not a sysctl on OpenBSD, and SEMMAP is not
a kernel configuration option. These were probably copy pasteos from
when the documentation had a single paragraph for *BSD.
Author: Daniel Gustafsson <daniel@yesql.se>
OFFSET <x> ROWS FETCH FIRST <y> ROWS ONLY syntax is supposed to accept
<simple value specification>, which includes parameters as well as
literals. When this syntax was added all those years ago, it was done
inconsistently, with <x> and <y> being different subsets of the
standard syntax.
Rectify that by making <x> and <y> accept the same thing, and allowing
either a (signed) numeric literal or a c_expr there, which allows for
parameters, variables, and parenthesized arbitrary expressions.
Per bug #15200 from Lukas Eder.
Backpatch all the way, since this has been broken from the start.
Discussion: https://postgr.es/m/877enz476l.fsf@news-spur.riddles.org.uk
Discussion: http://postgr.es/m/152647780335.27204.16895288237122418685@wrigleys.postgresql.org
An xref to a <para>'s ID isn't very helpful because paras don't have
names. This causes a warning while building PDFs, though for some
reason not while building HTML. The link arguably went to the wrong
place, too.
To fix, introduce a sub-section we can reference.
The "l" (ell) width spec means something in the corresponding scanf usage,
but not here. While modern POSIX says that applying "l" to "f" and other
floating format specs is a no-op, SUSv2 says it's undefined. Buildfarm
experience says that some old compilers emit warnings about it, and at
least one old stdio implementation (mingw's "ANSI" option) actually
produces wrong answers and/or crashes.
Discussion: https://postgr.es/m/21670.1526769114@sss.pgh.pa.us
Discussion: https://postgr.es/m/c085e1da-0d64-1c15-242d-c921f32e0d5c@dunslane.net
The description of the index property backward_scan was incorrect and
misleading; rectify.
Backpatch to 9.6 where the amutils functionality was introduced.
Explain partition pruning more thoroughly, in a section above the one
that explains constraint exclusion, since the new feature is the one
that will be used more extensively from now on. Move some of the
material from the constraint exclusion subsection to the one on
partition pruning, so that we can explain the legacy method by
explaining the differences with the new one instead of repeating it.
Author: David Rowley, Álvaro Herrera
Reviewed-by: Amit Langote, David G. Johnston, Justin Pryzby
Discussion: https://postgr.es/m/CAKJS1f8PECxEi1YQ9nhVtshtfOMHUzAMm_Zp4gGCOCnMPjEKJA@mail.gmail.com
I get "WARNING: nested link may be undefined in output: <xref @linkend =
'pgbench'> nested inside parent element link" from this.
Also remove some trailing whitespace.
- Change vacuum_cleanup_index_scale_factor GUC to PGC_USERSET.
vacuum_cleanup_index_scale_factor GUC was defined as PGC_SIGHUP. But this
GUC affects not only autovacuum. So it might be useful to change it from user
session in order to influence manually runned VACUUM.
- Add missing tab-complete support for vacuum_cleanup_index_scale_factor
reloption.
- Fix condition for B-tree index cleanup.
Zero value of vacuum_cleanup_index_scale_factor means that user wants B-tree
index cleanup to be never skipped.
- Documentation and comment improvements
Authors: Justin Pryzby, Alexander Korotkov, Liudmila Mantrova
Reviewed by: all authors and Robert Haas
Discussion: https://www.postgresql.org/message-id/flat/20180502023025.GD7631%40telsasoft.com
The set of functions that need parallel-safety adjustments isn't the
same in 9.6 as 10, so I shouldn't have blindly back-patched that list.
Adjust as needed. Also, provide examples of the commands to issue.
There shouldn't be a line break between two adjacent tags, because that
will appear as whitespace in the output. (The rendering engine might in
turn collapse that whitespace away, so it might not actually make a
difference, but it's more correct this way.)
Mark Dilger pointed out that the bootstrap parser does not allow
any of its keywords to appear as column values unless they're quoted,
and proposed dealing with that by quoting such values in genbki.pl.
Looking closer, though, we also have that problem with respect to table,
column, and type names appearing in the .bki file: the parser would fail
if any of those matched any of its keywords. While so far there have
been no conflicts (that I've heard of), this seems like a booby trap
waiting to catch somebody. Rather than clutter genbki.pl with enough
quoting logic to handle all that, let's make the bootstrap parser grow
up a little bit and treat its keywords as unreserved.
Experimentation shows that it's fairly easy to do so with the exception
of _null_, which I don't have a big problem with keeping as a reserved
word. The only change needed is that we can't have the "close" command
take an optional table name: it has to either require or forbid the
table name to avoid shift/reduce conflicts. genbki.pl has historically
always included the table name, so I took that option.
The implementation has bootscanner.l passing forward the string value
of each keyword, in case bootparse.y needs that. This avoids needing to
know the precise spelling of each keyword in bootparse.y, which is good
because that's not always obvious from the token name.
Discussion: https://postgr.es/m/3024FC91-DB6D-4732-B31C-DF772DF039A0@gmail.com
Use the same code we already applied in duplicate_oids and unused_oids
to let this script find Catalog.pm without help. This removes the need
to supply a -I switch in most cases.
Also, mark the script executable, again to follow the precedent of
duplicate_oids and unused_oids. Now you can just do
"./reformat_dat_file.pl pg_proc.dat"
if you want to reformat only one or a few .dat files rather than all.
It'd be possible to remove the -I switches in the Makefile's convenience
targets, but I chose to leave them: they don't hurt anything, and it's
possible that in weird VPATH situations they might be of value.
Identify pg_replication_origin as a shared catalog in catalogs.sgml,
using the same boilerplate wording used for most other shared catalogs
(and tweak another place where someone had randomly deviated from
that boilerplate).
Make an example in mmgr/README more consistent with surrounding text.
Update an obsolete cross-reference in a comment in storage/block.h.
Zhuo Ql
Discussion: https://postgr.es/m/44296255.1819230.1524889719001@mail.yahoo.com
In the wake of commit 5602265f7, we were doing duplicate-OID detection
quite inefficiently, by invoking duplicate_oids which does all the same
parsing of catalog headers and .dat files as genbki.pl does. That adds
under half a second on modern machines, but quite a bit more on slow
buildfarm critters, so it seems worth avoiding. Let's just extend
genbki.pl a little so it can also detect duplicate OIDs, and remove
the duplicate_oids call from the build process.
(This also means that duplicate OID detection will happen during
Windows builds, which AFAICS it didn't before.)
This makes the use-case for duplicate_oids a bit dubious, but it's
possible that people will still want to run that check without doing
a whole build run, so let's keep that script.
In passing, move down genbki.pl's creation of its temp output files
so that it doesn't happen until after we've done parsing and validation
of the input. This avoids leaving a lot of clutter around after a
failure.
John Naylor and Tom Lane
Discussion: https://postgr.es/m/37D774E4-FE1F-437E-B3D2-593F314B7505@postgrespro.ru
When bt_index_parent_check() is called with the heapallindexed option,
allocate a second Bloom filter to fingerprint block numbers that appear
in the downlinks of internal pages. Use Bloom filter probes when
walking the B-Tree to detect missing downlinks. This can detect subtle
problems with page deletion/VACUUM, such as corruption caused by the bug
just fixed in commit 6db4b499.
The downlink Bloom filter is bound in size by work_mem. Its optimal
size is typically far smaller than that of the regular heapallindexed
Bloom filter, especially when the index has high fan-out.
Author: Peter Geoghegan
Reviewer: Teodor Sigaev
Discussion: https://postgr.es/m/CAH2-WznUzY4fWTjm1tBB3JpVz8cCfz7k_qVp5BhuPyhivmWJFg@mail.gmail.com
This controls both plan-time and execution-time new-style partition
pruning. While finer-grain control is possible (maybe using an enum GUC
instead of boolean), there doesn't seem to be much need for that.
This new parameter controls partition pruning for all queries:
trivially, SELECT queries that affect partitioned tables are naturally
under its control since they are using the new technology. However,
while UPDATE/DELETE queries do not use the new code, we make the new GUC
control their behavior also (stealing control from
constraint_exclusion), because it is more natural, and it leads to a
more natural transition to the future in which those queries will also
use the new pruning code.
Constraint exclusion still controls pruning for regular inheritance
situations (those not involving partitioned tables).
Author: David Rowley
Review: Amit Langote, Ashutosh Bapat, Justin Pryzby, David G. Johnston
Discussion: https://postgr.es/m/CAKJS1f_0HwsxJG9m+nzU+CizxSdGtfe6iF_ykPYBiYft302DCw@mail.gmail.com
Previously, you could partition by a boolean column as long as you
spelled the bound values as string literals, for instance FOR VALUES
IN ('t'). The trouble with this is that ruleutils.c printed that as
FOR VALUES IN (TRUE), which is reasonable syntax but wasn't accepted by
the grammar. That results in dump-and-reload failures for such cases.
Apply a minimal fix that just causes TRUE and FALSE to be converted to
strings 'true' and 'false'. This is pretty grotty, but it's too late for
a more principled fix in v11 (to say nothing of v10). We should revisit
the whole issue of how partition bound values are parsed for v12.
Amit Langote
Discussion: https://postgr.es/m/e05c5162-1103-7e37-d1ab-6de3e0afaf70@lab.ntt.co.jp
Change things around so that proper quoting of values interpolated into
the BKI data by initdb is the responsibility of initdb, not something
we half-heartedly handle by putting double quotes into the raw BKI data.
(Note: experimentation shows that it still doesn't work to put a double
quote into the initial superuser username, but that's the fault of
inadequate quoting while interpolating the name into SQL scripts;
the BKI aspect of it works fine now.)
Having done that, we can remove the special-case handling of values
that look like "something" from genbki.pl, and instead teach it to
escape double --- and single --- quotes properly. This removes the
nowhere-documented need to treat those specially in the BKI source
data; whatever you write will be passed through unchanged into the
inserted data value, modulo Perl's rules about single-quoted strings.
Add documentation explaining the (pre-existing) handling of backslashes
in the BKI data.
Per an earlier discussion with John Naylor.
Discussion: https://postgr.es/m/CAJVSVGUNao=-Q2-vAN3PYcdF5tnL5JAHwGwzZGuYHtq+Mk_9ng@mail.gmail.com
They were accidentally excluded when reverting the backend online
checksum functionality, and since they weren't built the incorrect
reference to a removed section also did not trigger a problem.
Author: Christoph Berg
Make it clear that a cluster has to be shut down cleanly before
pg_verify_checksum can be run against it.
Author: Michael Paquier
Review: Daniel Gustafsson
This option makes no sense when the cluster checksum state cannot be
changed, and should have been removed in the revert.
Author: Daniel Gustafsson
Review: Michael Paquier
This reverts commits d204ef6377,
83454e3c2b and a few more commits thereafter
(complete list at the end) related to MERGE feature.
While the feature was fully functional, with sufficient test coverage and
necessary documentation, it was felt that some parts of the executor and
parse-analyzer can use a different design and it wasn't possible to do that in
the available time. So it was decided to revert the patch for PG11 and retry
again in the future.
Thanks again to all reviewers and bug reporters.
List of commits reverted, in reverse chronological order:
f1464c5380 Improve parse representation for MERGE
ddb4158579 MERGE syntax diagram correction
530e69e59b Allow cpluspluscheck to pass by renaming variable
01b88b4df5 MERGE minor errata
3af7b2b0d4 MERGE fix variable warning in non-assert builds
a5d86181ec MERGE INSERT allows only one VALUES clause
4b2d44031f MERGE post-commit review
4923550c20 Tab completion for MERGE
aa3faa3c7a WITH support in MERGE
83454e3c2b New files for MERGE
d204ef6377 MERGE SQL Command following SQL:2016
Author: Pavan Deolasee
Reviewed-by: Michael Paquier
In particular, the requirement to have SELECT privilege for the initial
table copy was previously not documented.
Author: Shinoda, Noriyoshi <noriyoshi.shinoda@hpe.com>
Commit 372728b0d created some problems for usages like building a
subdirectory without having first done "make all" at the top level,
or for proceeding directly to "make install" without "make all".
The only reasonably clean way to fix this seems to be to force the
submake-generated-headers rule to fire in *any* "make all" or "make
install" command anywhere in the tree. To avoid lots of redundant work,
as well as parallel make jobs possibly clobbering each others' output, we
still need to be sure that the rule fires only once in a recursive build.
For that, adopt the same MAKELEVEL hack previously used for "temp-install".
But try to document it a bit better.
The submake-errcodes mechanism previously used in src/port/ and src/common/
is subsumed by this, so we can get rid of those special cases. It was
inadequate for src/common/ anyway after the aforesaid commit, and it always
risked parallel attempts to build errcodes.h.
Discussion: https://postgr.es/m/E1f5FAB-0006LU-MB@gemulon.postgresql.org
In its original form, reformat_dat_file.pl smashed consecutive blank
lines to a single blank line, which was helpful for mopping up excess
whitespace during the bootstrap data format conversion. But going
forward, there seems little reason to do that; if developers want to
put in multiple blank lines, let 'em. This makes it conform to the
documentation I (tgl) wrote, too.
In passing, clean up some sloppy markup choices in bki.sgml.
John Naylor
Discussion: https://postgr.es/m/28827.1523039259@sss.pgh.pa.us
This reverts the backend sides of commit 1fde38beaa.
I have, at least for now, left the pg_verify_checksums tool in place, as
this tool can be very valuable without the rest of the patch as well,
and since it's a read-only tool that only runs when the cluster is down
it should be a lot safer.
Historically, the initial catalog data to be installed during bootstrap
has been written in DATA() lines in the catalog header files. This had
lots of disadvantages: the format was badly underdocumented, it was
very difficult to edit the data in any mechanized way, and due to the
lack of any abstraction the data was verbose, hard to read/understand,
and easy to get wrong.
Hence, move this data into separate ".dat" files and represent it in a way
that can easily be read and rewritten by Perl scripts. The new format is
essentially "key => value" for each column; while it's a bit repetitive,
explicit labeling of each value makes the data far more readable and less
error-prone. Provide a way to abbreviate entries by omitting field values
that match a specified default value for their column. This allows removal
of a large amount of repetitive boilerplate and also lowers the barrier to
adding new columns.
Also teach genbki.pl how to translate symbolic OID references into
numeric OIDs for more cases than just "regproc"-like pg_proc references.
It can now do that for regprocedure-like references (thus solving the
problem that regproc is ambiguous for overloaded functions), operators,
types, opfamilies, opclasses, and access methods. Use this to turn
nearly all OID cross-references in the initial data into symbolic form.
This represents a very large step forward in readability and error
resistance of the initial catalog data. It should also reduce the
difficulty of renumbering OID assignments in uncommitted patches.
Also, solve the longstanding problem that frontend code that would like to
use OID macros and other information from the catalog headers often had
difficulty with backend-only code in the headers. To do this, arrange for
all generated macros, plus such other declarations as we deem fit, to be
placed in "derived" header files that are safe for frontend inclusion.
(Once clients migrate to using these pg_*_d.h headers, it will be possible
to get rid of the pg_*_fn.h headers, which only exist to quarantine code
away from clients. That is left for follow-on patches, however.)
The now-automatically-generated macros include the Anum_xxx and Natts_xxx
constants that we used to have to update by hand when adding or removing
catalog columns.
Replace the former manual method of generating OID macros for pg_type
entries with an automatic method, ensuring that all built-in types have
OID macros. (But note that this patch does not change the way that
OID macros for pg_proc entries are built and used. It's not clear that
making that match the other catalogs would be worth extra code churn.)
Add SGML documentation explaining what the new data format is and how to
work with it.
Despite being a very large change in the catalog headers, there is no
catversion bump here, because postgres.bki and related output files
haven't changed at all.
John Naylor, based on ideas from various people; review and minor
additional coding by me; previous review by Alvaro Herrera
Discussion: https://postgr.es/m/CAJVSVGWO48JbbwXkJz_yBFyGYW-M9YWxnPdxJBUosDC9ou_F0Q@mail.gmail.com
This rectifies an oversight in commit 8224de4f4, by adding a new
property 'can_include' for pg_indexam_has_property, and adjusting the
results of pg_index_column_has_property to give more appropriate
results for INCLUDEd columns.
Allow the cluster to be optionally init'd with read access for the
group.
This means a relatively non-privileged user can perform a backup of the
cluster without requiring write privileges, which enhances security.
The mode of PGDATA is used to determine whether group permissions are
enabled for directory and file creates. This method was chosen as it's
simple and works well for the various utilities that write into PGDATA.
Changing the mode of PGDATA manually will not automatically change the
mode of all the files contained therein. If the user would like to
enable group access on an existing cluster then changing the mode of all
the existing files will be required. Note that pg_upgrade will
automatically change the mode of all migrated files if the new cluster
is init'd with the -g option.
Tests are included for the backend and all the utilities which operate
on the PG data directory to ensure that the correct mode is set based on
the data directory permissions.
Author: David Steele <david@pgmasters.net>
Reviewed-By: Michael Paquier, with discussion amongst many others.
Discussion: https://postgr.es/m/ad346fe6-b23e-59f1-ecb7-0e08390ad629%40pgmasters.net
Existing partition pruning is only able to work at plan time, for query
quals that appear in the parsed query. This is good but limiting, as
there can be parameters that appear later that can be usefully used to
further prune partitions.
This commit adds support for pruning subnodes of Append which cannot
possibly contain any matching tuples, during execution, by evaluating
Params to determine the minimum set of subnodes that can possibly match.
We support more than just simple Params in WHERE clauses. Support
additionally includes:
1. Parameterized Nested Loop Joins: The parameter from the outer side of the
join can be used to determine the minimum set of inner side partitions to
scan.
2. Initplans: Once an initplan has been executed we can then determine which
partitions match the value from the initplan.
Partition pruning is performed in two ways. When Params external to the plan
are found to match the partition key we attempt to prune away unneeded Append
subplans during the initialization of the executor. This allows us to bypass
the initialization of non-matching subplans meaning they won't appear in the
EXPLAIN or EXPLAIN ANALYZE output.
For parameters whose value is only known during the actual execution
then the pruning of these subplans must wait. Subplans which are
eliminated during this stage of pruning are still visible in the EXPLAIN
output. In order to determine if pruning has actually taken place, the
EXPLAIN ANALYZE must be viewed. If a certain Append subplan was never
executed due to the elimination of the partition then the execution
timing area will state "(never executed)". Whereas, if, for example in
the case of parameterized nested loops, the number of loops stated in
the EXPLAIN ANALYZE output for certain subplans may appear lower than
others due to the subplan having been scanned fewer times. This is due
to the list of matching subnodes having to be evaluated whenever a
parameter which was found to match the partition key changes.
This commit required some additional infrastructure that permits the
building of a data structure which is able to perform the translation of
the matching partition IDs, as returned by get_matching_partitions, into
the list index of a subpaths list, as exist in node types such as
Append, MergeAppend and ModifyTable. This allows us to translate a list
of clauses into a Bitmapset of all the subpath indexes which must be
included to satisfy the clause list.
Author: David Rowley, based on an earlier effort by Beena Emerson
Reviewers: Amit Langote, Robert Haas, Amul Sul, Rajkumar Raghuwanshi,
Jesper Pedersen
Discussion: https://postgr.es/m/CAOG9ApE16ac-_VVZVvv0gePSgkg_BwYEV1NBqZFqDR2bBE0X0A@mail.gmail.com
This patch introduces INCLUDE clause to index definition. This clause
specifies a list of columns which will be included as a non-key part in
the index. The INCLUDE columns exist solely to allow more queries to
benefit from index-only scans. Also, such columns don't need to have
appropriate operator classes. Expressions are not supported as INCLUDE
columns since they cannot be used in index-only scans.
Index access methods supporting INCLUDE are indicated by amcaninclude flag
in IndexAmRoutine. For now, only B-tree indexes support INCLUDE clause.
In B-tree indexes INCLUDE columns are truncated from pivot index tuples
(tuples located in non-leaf pages and high keys). Therefore, B-tree indexes
now might have variable number of attributes. This patch also provides
generic facility to support that: pivot tuples contain number of their
attributes in t_tid.ip_posid. Free 13th bit of t_info is used for indicating
that. This facility will simplify further support of index suffix truncation.
The changes of above are backward-compatible, pg_upgrade doesn't need special
handling of B-tree indexes for that.
Bump catalog version
Author: Anastasia Lubennikova with contribition by Alexander Korotkov and me
Reviewed by: Peter Geoghegan, Tomas Vondra, Antonin Houska, Jeff Janes,
David Rowley, Alexander Korotkov
Discussion: https://www.postgresql.org/message-id/flat/56168952.4010101@postgrespro.ru
Jsonb has a complex nature so there isn't best-for-everything way to convert it
to tsvector for full text search. Current to_tsvector(json(b)) suggests to
convert only string values, but it's possible to index keys, numerics and even
booleans value. To solve that json(b)_to_tsvector has a second required
argument contained a list of desired types of json fields. Second argument is
a jsonb scalar or array right now with possibility to add new options in a
future.
Bump catalog version
Author: Dmitry Dolgov with some editorization by me
Reviewed by: Teodor Sigaev
Discussion: https://www.postgresql.org/message-id/CA+q6zcXJQbS1b4kJ_HeAOoOc=unfnOrUEL=KGgE32QKDww7d8g@mail.gmail.com
Update the built-in logical replication system to make use of the
previously added logical decoding for TRUNCATE support. Add the
required truncate callback to pgoutput and a new logical replication
protocol message.
Publications get a new attribute to determine whether to replicate
truncate actions. When updating a publication via pg_dump from an older
version, this is not set, thus preserving the previous behavior.
Author: Simon Riggs <simon@2ndquadrant.com>
Author: Marco Nenciarini <marco.nenciarini@2ndquadrant.it>
Author: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Add a new WAL record type for TRUNCATE, which is only used when
wal_level >= logical. (For physical replication, TRUNCATE is already
replicated via SMGR records.) Add new callback for logical decoding
output plugins to receive TRUNCATE actions.
Author: Simon Riggs <simon@2ndquadrant.com>
Author: Marco Nenciarini <marco.nenciarini@2ndquadrant.it>
Author: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Also enable this for postgres_fdw.
Etsuro Fujita, based on an earlier patch by Amit Langote. The larger
patch series of which this is a part has been reviewed by Amit
Langote, David Fetter, Maksim Milyutin, Álvaro Herrera, Stephen Frost,
and me. Minor documentation changes to the final version by me.
Discussion: http://postgr.es/m/29906a26-da12-8c86-4fb9-d8f88442f2b9@lab.ntt.co.jp
This provides a newer version of adminpack which works with the newly
added default roles to support GRANT'ing to non-superusers access to
read and write files, along with related functions (unlinking files,
getting file length, renaming/removing files, scanning the log file
directory) which are supported through adminpack.
Note that new versions of the functions are required because an
environment might have an updated version of the library but still have
the old adminpack 1.0 catalog definitions (where EXECUTE is GRANT'd to
PUBLIC for the functions).
This patch also removes the long-deprecated alternative names for
functions that adminpack used to include and which are now included in
the backend, in adminpack v1.1. Applications using the deprecated names
should be updated to use the backend functions instead. Existing
installations which continue to use adminpack v1.0 should continue to
function until/unless adminpack is upgraded.
Reviewed-By: Michael Paquier
Discussion: https://postgr.es/m/20171231191939.GR2416%40tamriel.snowman.net
This patch adds new default roles named 'pg_read_server_files',
'pg_write_server_files', 'pg_execute_server_program' which
allow an administrator to GRANT to a non-superuser role the ability to
access server-side files or run programs through PostgreSQL (as the user
the database is running as). Having one of these roles allows a
non-superuser to use server-side COPY to read, write, or with a program,
and to use file_fdw (if installed by a superuser and GRANT'd USAGE on
it) to read from files or run a program.
The existing misc file functions are also changed to allow a user with
the 'pg_read_server_files' default role to read any files on the
filesystem, matching the privileges given to that role through COPY and
file_fdw from above.
Reviewed-By: Michael Paquier
Discussion: https://postgr.es/m/20171231191939.GR2416%40tamriel.snowman.net
This makes it possible to turn checksums on in a live cluster, without
the previous need for dump/reload or logical replication (and to turn it
off).
Enabling checkusm starts a background process in the form of a
launcher/worker combination that goes through the entire database and
recalculates checksums on each and every page. Only when all pages have
been checksummed are they fully enabled in the cluster. Any failure of
the process will revert to checksums off and the process has to be
started.
This adds a new WAL record that indicates the state of checksums, so
the process works across replicated clusters.
Authors: Magnus Hagander and Daniel Gustafsson
Review: Tomas Vondra, Michael Banck, Heikki Linnakangas, Andrey Borodin
Error-tolerant conversion function with web-like syntax for search query,
it simplifies constraining search engine with close to habitual interface for
users.
Bump catalog version
Authors: Victor Drobny, Dmitry Ivanov with editorization by me
Reviewed by: Aleksander Alekseev, Tomas Vondra, Thomas Munro, Aleksandr Parfenov
Discussion: https://www.postgresql.org/message-id/flat/fe931111ff7e9ad79196486ada79e268@postgrespro.ru