Since LISTEN is (still) disallowed, UNLISTEN must be a no-op in a
hot-standby session, and so there's no harm in allowing it. This
change allows client code to not worry about whether it's connected
to a primary or standby server when performing session-state-reset
type activities. (Note that DISCARD ALL, which includes UNLISTEN,
was already allowed, making it inconsistent to reject UNLISTEN.)
Per discussion, back-patch to all supported versions.
Shay Rojansky, reviewed by Mi Tar
Discussion: https://postgr.es/m/CADT4RqCf2gA_TJtPAjnGzkC3ZiexfBZiLmA-mV66e4UyuVv8bA@mail.gmail.com
The pgbench regression test supposed that srandom() with a specific value
would result in deterministic output from random(), as required by POSIX.
It emerges however that OpenBSD is too smart to be constrained by mere
standards, so their random() emits nondeterministic output anyway.
While a workaround does exist, what seems like a better fix is to stop
relying on the platform's srandom()/random() altogether, so that what
you get from --random-seed=N is not merely deterministic but platform
independent. Hence, use a separate pg_jrand48() random sequence in
place of random().
Also adjust the regression test case that's supposed to detect
nondeterminism so that it's more likely to detect it; the original
choice of random_zipfian parameter tended to produce the same output
all the time even if the underlying behavior wasn't deterministic.
In passing, improve pgbench's docs about random_zipfian().
Back-patch to v11 where this code was introduced.
Fabien Coelho and Tom Lane
Discussion: https://postgr.es/m/4615.1547792324@sss.pgh.pa.us
Attempting to use a temporary table within a two-phase transaction is
forbidden for ages. However, there have been uncovered grounds for
a couple of other object types and commands which work on temporary
objects with two-phase commit. In short, trying to create, lock or drop
an object on a temporary schema should not be authorized within a
two-phase transaction, as it would cause its state to create
dependencies with other sessions, causing all sorts of side effects with
the existing session or other sessions spawned later on trying to use
the same temporary schema name.
Regression tests are added to cover all the grounds found, the original
report mentioned function creation, but monitoring closer there are many
other patterns with LOCK, DROP or CREATE EXTENSION which are involved.
One of the symptoms resulting in combining both is that the session
which used the temporary schema is not able to shut down completely,
waiting for being able to drop the temporary schema, something that it
cannot complete because of the two-phase transaction involved with
temporary objects. In this case the client is able to disconnect but
the session remains alive on the backend-side, potentially blocking
connection backend slots from being used. Other problems reported could
also involve server crashes.
This is back-patched down to v10, which is where 9b013dc has introduced
MyXactFlags, something that this patch relies on.
Reported-by: Alexey Bashtanov
Author: Michael Paquier
Reviewed-by: Masahiko Sawada
Discussion: https://postgr.es/m/5d910e2e-0db8-ec06-dd5f-baec420513c3@imap.cc
Backpatch-through: 10
These have been found while cross-checking for the use of unique words
in the documentation, and a wait event was not getting generated in a way
consistent to what the documentation provided.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/9b5a3a85-899a-ae62-dbab-1e7943aa5ab1@gmail.com
Since approximately PostgreSQL 10, it is no longer required that
environment variables at installation time such as PERL, PYTHON, TCLSH
be "full path names", so change that phrasing in the installation
instructions. (The exact time of change appears to differ for PERL
and the others, but it works consistently in PostgreSQL 10.)
Also while we're here document the defaults for PERL and PYTHON, but
since the search list for TCLSH is so long, let's leave that out so we
don't need to maintain a copy of that list in the installation
instructions.
For a long time, plpgsql has allowed trigger functions to parse
references to OLD and NEW even if the current trigger event type didn't
assign a value to one or the other variable; but actually executing such
a reference would fail. The v11 changes to use "expanded records" for
DTYPE_REC variables changed the behavior so that the unassigned variable
now reads as a null composite value. While this behavioral change was
more or less unintentional, it seems that leaving it like this is better
than adding code and complexity to be bug-compatible with the old way.
The change doesn't break any code that worked before, and it eliminates
a gotcha that often required extra code to work around.
Hence, update the docs to say that these variables are "null" not
"unassigned" when not relevant to the event type. And add a regression
test covering the behavior, so that we'll notice if we ever break it
again.
Per report from Kristjan Tammekivi.
Discussion: https://postgr.es/m/CAABK7uL-uC9ZxKBXzo_68pKt7cECfNRv+c35CXZpjq6jCAzYYA@mail.gmail.com
runtime.sgml said that you couldn't change SysV IPC parameters on OpenBSD
except by rebuilding the kernel. That's definitely wrong in OpenBSD 6.x,
and excavation in their man pages says it changed in OpenBSD 3.3.
Update NetBSD and OpenBSD sections to recommend adjustment of the SEMMNI
and SEMMNS settings, which are painfully small by default on those
platforms. (The discussion thread contemplated recommending that
people select POSIX semaphores instead, but the performance consequences
of that aren't really clear, so I'll refrain.)
Remove pointless discussion of SEMMNU and SEMMAP from the FreeBSD
section. Minor other wordsmithing.
Discussion: https://postgr.es/m/27582.1546928073@sss.pgh.pa.us
"$user" in a search_path string is replaced by CURRENT_USER not
SESSION_USER. (It actually was SESSION_USER in the initial implementation,
but we changed it shortly later, and evidently forgot to fix the docs to
match.)
Noted by antonov@stdpr.ru
Discussion: https://postgr.es/m/159151fb45d490c8d31ea9707e9ba99d@stdpr.ru
The source code comments documented this, but the user-facing docs, not
so much. Add a section to Appendix B that discusses it.
In passing, improve a couple other things in Appendix B --- notably,
a long-obsolete claim that time zone abbreviations are looked up in
a fixed table.
Per bug #15527 from Michael Davidson.
Discussion: https://postgr.es/m/15527-f1be0b4dc99ebbe7@postgresql.org
The documentation of CREATE/ALTER ROLE has been missing two things
related to PASSWORD:
- The password value provided needs to be quoted, some places of the
documentation marked the field with quotes, but not others, which led to
confusion.
- PASSWORD NULL was not provided consistently, with ENCRYPTED being not
compatible with it.
Reported-by: Steven Winfield
Author: Michael Paquier
Reviewed-by: David G. Johnston
Discussion: https://postgr.es/m/154282901979.1316.7418475422120496802@wrigleys.postgresql.org
Documenting INCLUDE in the section about unique indexes is confusing,
as complained of by Emilio Platzer. Furthermore, it entirely failed
to explain why you might want to use the feature. The section about
index-only scans is really the right place; it already talked about
making such things the hard way. Rewrite that text to describe INCLUDE
as the normal way to make a covering index.
Also, move that section up a couple of places, as it now seems more
important than some of the stuff we had before it. It still has to
be after expression and partial indexes, since otherwise some of it
would involve forward references.
Discussion: https://postgr.es/m/154031939560.30897.14677735588262722042@wrigleys.postgresql.org
The documentation claimed that an enum type requires "one or more"
labels, but since 1fd9883ff4, zero labels are also allowed.
Reported-by: Lukas Eder <lukas.eder@gmail.com>
Bug: #15356
This didn't actually work: COPY would fail to flush the right files, and
instead would try to flush a non-existing file, causing the whole
transaction to fail.
Cope by raising an error as soon as the command is sent instead, to
avoid a nasty later surprise. Of course, it would be much better to
make it work, but we don't have a patch for that yet, and we don't know
if we'll want to backpatch one when we do.
Reported-by: Tomas Vondra
Author: David Rowley
Reviewed-by: Amit Langote, Steve Singer, Tomas Vondra
On some operating systems, it doesn't make sense to retry fsync(),
because dirty data cached by the kernel may have been dropped on
write-back failure. In that case the only remaining copy of the
data is in the WAL. A subsequent fsync() could appear to succeed,
but not have flushed the data. That means that a future checkpoint
could apparently complete successfully but have lost data.
Therefore, violently prevent any future checkpoint attempts by
panicking on the first fsync() failure. Note that we already
did the same for WAL data; this change extends that behavior to
non-temporary data files.
Provide a GUC data_sync_retry to control this new behavior, for
users of operating systems that don't eject dirty data, and possibly
forensic/testing uses. If it is set to on and the write-back error
was transient, a later checkpoint might genuinely succeed (on a
system that does not throw away buffers on failure); if the error is
permanent, later checkpoints will continue to fail. The GUC defaults
to off, meaning that we panic.
Back-patch to all supported releases.
There is still a narrow window for error-loss on some operating
systems: if the file is closed and later reopened and a write-back
error occurs in the intervening time, but the inode has the bad
luck to be evicted due to memory pressure before we reopen, we could
miss the error. A later patch will address that with a scheme
for keeping files with dirty data open at all times, but we judge
that to be too complicated to back-patch.
Author: Craig Ringer, with some adjustments by Thomas Munro
Reported-by: Craig Ringer
Reviewed-by: Robert Haas, Thomas Munro, Andres Freund
Discussion: https://postgr.es/m/20180427222842.in2e4mibx45zdth5%40alap3.anarazel.de
This hasn't been correct since 9.3 added "latex-longtable".
I left the phraseology "Unique abbreviations are allowed" alone.
It's correct as far as it goes, and we are studiously refraining
from specifying exactly what happens if you give a non-unique
abbreviation. (The answer in the back branches is "you get a
backwards-compatible choice", and the answer in HEAD will shortly
be "you get an error", but there seems no need to mention such
details here.)
Daniel Vérité
Discussion: https://postgr.es/m/cb7e1caf-3ea6-450d-af28-f524903a030c@manitou-mail.org
This commit fixes a set of issues with ON COMMIT actions when used on
partitioned tables and tables with inheritance children:
- Applying ON COMMIT DROP on a partitioned table with partitions or on a
table with inheritance children caused a failure at commit time, with
complains about the children being already dropped as all relations are
dropped one at the same time.
- Applying ON COMMIT DELETE on a partition relying on a partitioned
table which uses ON COMMIT DROP would cause the partition truncation to
fail as the parent is removed first.
The solution to the first problem is to handle the removal of all the
dependencies in one go instead of dropping relations one-by-one, based
on a suggestion from Álvaro Herrera. So instead all the relation OIDs
to remove are gathered and then processed in one round of multiple
deletions.
The solution to the second problem is to reorder the actions, with
truncation happening first and relation drop done after. Even if it
means that a partition could be first truncated, then immediately
dropped if its partitioned table is dropped, this has the merit to keep
the code simple as there is no need to do existence checks on the
relations to drop.
Contrary to a manual TRUNCATE on a partitioned table, ON COMMIT DELETE
does not cascade to its partitions. The ON COMMIT action defined on
each partition gets the priority.
Author: Michael Paquier
Reviewed-by: Amit Langote, Álvaro Herrera, Robert Haas
Discussion: https://postgr.es/m/68f17907-ec98-1192-f99f-8011400517f5@lab.ntt.co.jp
Backpatch-through: 10
Previously it was possible to set client_min_messages to FATAL or PANIC,
which had the effect of suppressing transmission of regular ERROR messages
to the client. Perhaps that seemed like a useful option in the past, but
the trouble with it is that it breaks guarantees that are explicitly made
in our FE/BE protocol spec about how a query cycle can end. While libpq
and psql manage to cope with the omission, that's mostly because they
are not very bright; client libraries that have more semantic knowledge
are likely to get confused. Notably, pgODBC doesn't behave very sanely.
Let's fix this by getting rid of the ability to set client_min_messages
above ERROR.
In HEAD, just remove the FATAL and PANIC options from the set of allowed
enum values for client_min_messages. (This change also affects
trace_recovery_messages, but that's OK since these aren't useful values
for that variable either.)
In the back branches, there was concern that rejecting these values might
break applications that are explicitly setting things that way. I'm
pretty skeptical of that argument, but accommodate it by accepting these
values and then internally setting the variable to ERROR anyway.
In all branches, this allows a couple of tiny simplifications in the
logic in elog.c, so do that.
Also respond to the point that was made that client_min_messages has
exactly nothing to do with the server's logging behavior, and therefore
does not belong in the "When To Log" subsection of the documentation.
The "Statement Behavior" subsection is a better match, so move it there.
Jonah Harris and Tom Lane
Discussion: https://postgr.es/m/7809.1541521180@sss.pgh.pa.us
Discussion: https://postgr.es/m/15479-ef0f4cc2fd995ca2@postgresql.org
The code added by commit c203d6cf8 causes a crash in at least one case,
where a potentially-optimizable expression index has a storage type
different from the input data type. A cursory code review turned up
numerous other problems that seem impractical to fix on short notice.
Andres argued for revert of that patch some time ago, and if additional
senior committers had been paying attention, that's likely what would
have happened, but we were not :-(
At this point we can't just revert, at least not in v11, because that would
mean an ABI break for code touching relcache entries. And we should not
remove the (also buggy) support for the recheck_on_update index reloption,
since it might already be used in some databases in the field. So this
patch just does the as-little-invasive-as-possible measure of disabling
the feature as though recheck_on_update were forced off for all indexes.
I also removed the related regression tests (which would otherwise fail)
and the user-facing documentation of the reloption.
We should undertake a more thorough code cleanup if the patch can't be
fixed, but not under the extreme time pressure of being already overdue
for 11.1 release.
Per report from Ondřej Bouda and subsequent private discussion among
pgsql-release.
Discussion: https://postgr.es/m/20181106185255.776mstcyehnc63ty@alvherre.pgsql
I removed the item about the pg_stat_statements change from
release-11.sgml, as part of a sweep to delete items already committed
in 11.0; but actually we'd best keep it to ensure that people who've
pg_upgraded their databases will take the requisite action. Also make
said action more visible by making it into its own para. Noted by
Jonathan Katz.
exec_stmt_call() tried to extract information out of a CALL statement's
argument list without using expand_function_arguments(), apparently in
the hope of saving a few nanoseconds by not processing defaulted
arguments. It got that quite wrong though, leading to crashes with
named arguments, as well as failure to enforce writability of the
argument for a defaulted INOUT parameter. Fix and simplify the logic
by using expand_function_arguments() before examining the list.
Also, move the argument-examination to just after producing the CALL
command's plan, before invoking the called procedure. This ensures
that we'll track possible changes in the procedure's argument list
correctly, and avoids a hazard of the plan cache being flushed while
the procedure executes.
Also fix assorted falsehoods and omissions in associated documentation.
Per bug #15477 from Alexey Stepanov.
Patch by me, with some help from Pavel Stehule. Back-patch to v11.
Discussion: https://postgr.es/m/15477-86075b1d1d319e0a@postgresql.org
Discussion: https://postgr.es/m/CAFj8pRA6UsujpTs9Sdwmk-R6yQykPx46wgjj+YZ7zxm4onrDyw@mail.gmail.com