if we already have a stronger lock due to the index's table being the
update target table of the query. Same optimization I applied earlier
at the table level. There doesn't seem to be much interest in the more
radical idea of not locking indexes at all, so do what we can ...
generated by bitmap index scans. Along the way, simplify and speed up
the code for counting sequential and index scans; it was both confusing
and inefficient to be taking care of that in the per-tuple loops, IMHO.
initdb forced because of internal changes in pg_stat view definitions.
- full concurrency for insert/update/select/vacuum:
- select and vacuum never locks more than one page simultaneously
- select (gettuple) hasn't any lock across it's calls
- insert never locks more than two page simultaneously:
- during search of leaf to insert it locks only one page
simultaneously
- while walk upward to the root it locked only parent (may be
non-direct parent) and child. One of them X-lock, another may
be S- or X-lock
- 'vacuum full' locks index
- improve gistgetmulti
- simplify XLOG records
Fix bug in index_beginscan_internal: LockRelation may clean
rd_aminfo structure, so move GET_REL_PROCEDURE after LockRelation
nonconsecutive columns of a multicolumn index, as per discussion around
mid-May (pghackers thread "Best way to scan on-disk bitmaps"). This
turns out to require only minimal changes in btree, and so far as I can
see none at all in GiST. btcostestimate did need some work, but its
original assumption that index selectivity == heap selectivity was
quite bogus even before this.
routines in the index's relcache entry, instead of doing a fresh fmgr_info
on every index access. We were already doing this for the index's opclass
support functions; not sure why we didn't think to do it for the AM
functions too. This supersedes the former method of caching (only)
amgettuple in indexscan scan descriptors; it's an improvement because the
function lookup can be amortized across multiple statements instead of
being repeated for each statement. Even though lookup for builtin
functions is pretty cheap, this seems to drop a percent or two off some
simple benchmarks.
in an inconsistent state. (This is only latent because in reality
ExecSeqRestrPos is dead code at the moment ... but someday maybe it won't
be.) Add some comments about what the API for plan node mark/restore
actually is, because it's not immediately obvious.
indexes. Replace all heap_openr and index_openr calls by heap_open
and index_open. Remove runtime lookups of catalog OID numbers in
various places. Remove relcache's support for looking up system
catalogs by name. Bulky but mostly very boring patch ...
access: define new index access method functions 'amgetmulti' that can
fetch multiple TIDs per call. (The functions exist but are totally
untested as yet.) Since I was modifying pg_am anyway, remove the
no-longer-needed 'rel' parameter from amcostestimate functions, and
also remove the vestigial amowner column that was creating useless
work for Alvaro's shared-object-dependencies project.
Initdb forced due to changes in pg_am.
convention for isnull flags. Also, remove the useless InsertIndexResult
return struct from index AM aminsert calls --- there is no reason for
the caller to know where in the index the tuple was inserted, and we
were wasting a palloc cycle per insert to deliver this uninteresting
value (plus nontrivial complexity in some AMs).
I forced initdb because of the change in the signature of the aminsert
routines, even though nothing really looks at those pg_proc entries...
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
http://archives.postgresql.org/pgsql-hackers/2004-10/msg00464.php.
This fix is intended to be permanent: it moves the responsibility for
calling SetBufferCommitInfoNeedsSave() into the tqual.c routines,
eliminating the requirement for callers to test whether t_infomask changed.
Also, tighten validity checking on buffer IDs in bufmgr.c --- several
routines were paranoid about out-of-range shared buffer numbers but not
about out-of-range local ones, which seems a tad pointless.
now are supposed to take some kind of lock on an index whenever you
are going to access the index contents, rather than relying only on a
lock on the parent table.
the next are handled by ReleaseAndReadBuffer rather than separate
ReleaseBuffer and ReadBuffer calls. This cuts the number of acquisitions
of the BufMgrLock by a factor of 2 (possibly more, if an indexscan happens
to pull successive rows from the same heap page). Unfortunately this
doesn't seem enough to get us out of the recently discussed context-switch
storm problem, but it's surely worth doing anyway.
NULL key pointer, indicating that the existing scan key should be reused.
This behavior isn't used yet but will be needed for my planned fix to
the keys_are_unique code.
now knows what to do upon hitting a dead page (in theory anyway, it's
untested...). Add a post-VACUUM-cleanup entry point for index AMs, to
provide a place for dead-page scavenging to happen.
Also, fix oversight that broke btpo_prev links in temporary indexes.
initdb forced due to additions in pg_am.
the index AM when we know we are fetching a unique row. However, this
logic did not consider the possibility that it would be asked to fetch
backwards. Also fix mark/restore to work correctly in this scenario.
transaction, so as to avoid returning them out of the index AM. Saves
repeated heap_fetch operations on frequently-updated rows. Also detect
queries on unique keys (equality to all columns of a unique index), and
don't bother continuing scan once we have found first match.
Killing is implemented in the btree and hash AMs, but not yet in rtree
or gist, because there isn't an equally convenient place to do it in
those AMs (the outer amgetnext routine can't do it without re-pinning
the index page).
Did some small cleanup on APIs of HeapTupleSatisfies, heap_fetch, and
index_insert to make this a little easier.
yesterday's proposal to pghackers. Also remove unnecessary parameters
to heap_beginscan, heap_rescan. I modified pg_proc.h to reflect the
new numbers of parameters for the AM interface routines, but did not
force an initdb because nothing actually looks at those fields.
an 'opclass owner' column in pg_opclass. Nothing is done with it at
present, but since there are plans to invent a CREATE OPERATOR CLASS
command soon, we'll probably want DROP OPERATOR CLASS too, which
suggests that a notion of ownership would be a good idea.
in schemas other than the system namespace; however, there's no search
path yet, and not all operations work yet on tables outside the system
namespace.
recreated since the start of our transaction, our first reference to it
errored out because we'd try to reuse our old relcache entry for it.
Do this by accepting SI inval messages just before relcache search in
heap_openr, so that dead relcache entries will be flushed before we
search. Also, break heap_open/openr into two pairs of routines,
relation_open(r) and heap_open(r). The relation_open routines make
no tests on relkind and so can be used to open anything that has a
pg_class entry. The heap_open routines are wrappers that add a relkind
test to preserve their established behavior. Use the relation_open
routines in several places that had various kluge solutions for opening
rels that might be either heap or index rels.
Also, remove the old 'heap stats' code that's been superseded by Jan's
stats collector, and clean up some inconsistencies in error reporting
between the different types of ALTER TABLE.
lookup info in the relcache for index access method support functions.
This makes a huge difference for dynamically loaded support functions,
and should save a few cycles even for built-in ones. Also tweak dfmgr.c
so that load_external_function is called only once, not twice, when
doing fmgr_info for a dynamically loaded function. All per performance
gripe from Teodor Sigaev, 5-Oct-01.
per previous discussion on pghackers. Most of the duplicate code in
different AMs' ambuild routines has been moved out to a common routine
in index.c; this means that all index types now do the right things about
inserting recently-dead tuples, etc. (I also removed support for EXTEND
INDEX in the ambuild routines, since that's about to go away anyway, and
it cluttered the code a lot.) The retail indextuple deletion routines have
been replaced by a "bulk delete" routine in which the indexscan is inside
the access method. I haven't pushed this change as far as it should go yet,
but it should allow considerable simplification of the internal bookkeeping
for deletions. Also, add flag columns to pg_am to eliminate various
hardcoded tests on AM OIDs, and remove unused pg_am columns.
Fix rtree and gist index types to not attempt to store NULLs; before this,
gist usually crashed, while rtree managed not to crash but computed wacko
bounding boxes for NULL entries (which might have had something to do with
the performance problems we've heard about occasionally).
Add AtEOXact routines to hash, rtree, and gist, all of which have static
state that needs to be reset after an error. We discovered this need long
ago for btree, but missed the other guys.
Oh, one more thing: concurrent VACUUM is now the default.
report on old-style functions invoked by RI triggers. We had a number of
other places that were being sloppy about which memory context FmgrInfo
subsidiary data will be allocated in. Turns out none of them actually
cause a problem in 7.1, but this is for arcane reasons such as the fact
that old-style triggers aren't supported anyway. To avoid getting burnt
later, I've restructured the trigger support so that we don't keep trigger
FmgrInfo structs in relcache memory. Some other related cleanups too:
it's not really necessary to call fmgr_info at all while setting up
the index support info in relcache entries, because those ScanKeyEntry
structs are never used to invoke the functions. This should speed up
relcache initialization a tiny bit.
pass-by-ref data types --- eg, an index on lower(textfield) --- no longer
leak memory during index creation or update. Clean up a lot of redundant
code ... did you know that copy, vacuum, truncate, reindex, extend index,
and bootstrap each basically duplicated the main executor's logic for
extracting information about an index and preparing index entries?
Functional indexes should be a little faster now too, due to removal
of repeated function lookups.
CREATE INDEX 'opt_type' clause is deimplemented by these changes,
but I haven't removed it from the parser yet (need to merge with
Thomas' latest change set first).
key call sites are changed, but most called functions are still oldstyle.
An exception is that the PL managers are updated (so, for example, NULL
handling now behaves as expected in plperl and plpgsql functions).
NOTE initdb is forced due to added column in pg_proc.
pghackers discussion of 5-Jan-2000. The amopselect and amopnpages
estimators are gone, and in their place is a per-AM amcostestimate
procedure (linked to from pg_am, not pg_amop).
relcache entry no longer leaks a small amount of memory. index_endscan
now releases all the memory acquired by index_beginscan, so callers of it
should NOT pfree the scan descriptor anymore.
additional argument specifying the kind of lock to acquire/release (or
'NoLock' to do no lock processing). Ensure that all relations are locked
with some appropriate lock level before being examined --- this ensures
that relevant shared-inval messages have been processed and should prevent
problems caused by concurrent VACUUM. Fix several bugs having to do with
mismatched increment/decrement of relation ref count and mismatched
heap_open/close (which amounts to the same thing). A bogus ref count on
a relation doesn't matter much *unless* a SI Inval message happens to
arrive at the wrong time, which is probably why we got away with this
sloppiness for so long. Repair missing grab of AccessExclusiveLock in
DROP TABLE, ALTER/RENAME TABLE, etc, as noted by Hiroshi.
Recommend 'make clean all' after pulling this update; I modified the
Relation struct layout slightly.
Will post further discussion to pghackers list shortly.
for against a just updated CVS tree. It contains
Partial new rewrite system that handles subselects, view
aggregate columns, insert into select from view, updates
with set col = view-value and select rules restriction to
view definition.
Updates for rule/view backparsing utility functions to
handle subselects correct.
New system views pg_tables and pg_indexes (where you can
see the complete index definition in the latter one).
Enabling array references on query parameters.
Bugfix for functional index.
Little changes to system views pg_rules and pg_views.
The rule system isn't a release-stopper any longer.
But another stopper is that I don't know if the latest
changes to PL/pgSQL (not already in CVS) made it compile on
AIX. Still wait for some response from Dave.
Jan
no longer returns buffer pointer, can be gotten from scan;
descriptor; bootstrap can create multi-key indexes;
pg_procname index now is multi-key index; oidint2, oidint4, oidname
are gone (must be removed from regression tests); use System Cache
rather than sequential scan in many places; heap_modifytuple no
longer takes buffer parameter; remove unused buffer parameter in
a few other functions; oid8 is not index-able; remove some use of
single-character variable names; cleanup Buffer variables usage
and scan descriptor looping; cleaned up allocation and freeing of
tuples; 18k lines of diff;
As an example I sent a bug-report on 26 Nov to tell that the fix included
below is necessary to compile pg95-current on Ultrix with Digital's
standard C compiler c89. In fact I think that this fix is needed
for any C compiler sticking very close the standard, see my discussion
in the original bug report.
Erik Bertelsen
Changes:
* Unique index capability works using the syntax 'create unique
index'.
* Duplicate OID's in the system tables are removed. I put
little scripts called 'duplicate_oids' and 'find_oid' in
include/catalog that help to find and remove duplicate OID's.
I also moved 'unused_oids' from backend/catalog to
include/catalog, since it has to be in the same directory
as the include files in order to work.
* The backend tries converting the name of a function or aggregate
to all lowercase if the original name given doesn't work (mostly
for compatibility with ODBC).
* You can 'SELECT NULL' to your heart's content.
* I put my _bt_updateitem fix in instead, which uses
_bt_insertonpg so that even if the new key is so big that
the page has to be split, everything still works.
* All literal references to system catalog OID's have been
replaced with references to define'd constants from the catalog
header files.
* I added a couple of node copy functions. I think this was a
preliminary attempt to get rules to work.
Tom Lane
Bruce Momjian
Teodor Sigaev
PostgreSQL Daemon
Peter Eisentraut
Jan Wieck
Vadim B. Mikheev
Marc G. Fournier