to track the number of LWLock acquisitions and the number of times we
block waiting for an LWLock, on a per-process basis. After having needed
this twice in the past few months, seems like it should go into CVS.
update no-longer-existing pages to fall through as no-ops, but make a note
of each page number referenced by such records. If we don't see a later
XLOG entry dropping the table or truncating away the page, complain at
the end of XLOG replay. Since this fixes the known failure mode for
full_page_writes = off, revert my previous band-aid patch that disabled
that GUC variable.
If a process abandons a wait in LockBufferForCleanup (in practice,
only happens if someone cancels a VACUUM) just before someone else
sends it a signal indicating the buffer is available, it was possible
for the wakeup to remain in the process' semaphore, causing misbehavior
next time the process waited for an lmgr lock. Rather than try to
prevent the race condition directly, it seems best to make the lock
manager robust against leftover wakeups, by having it repeat waiting
on the semaphore if the lock has not actually been granted or denied
yet.
misleadingly-named WriteBuffer routine, and instead require routines that
change buffer pages to call MarkBufferDirty (which does exactly what it says).
We also require that they do so before calling XLogInsert; this takes care of
the synchronization requirement documented in SyncOneBuffer. Note that
because bufmgr takes the buffer content lock (in shared mode) while writing
out any buffer, it doesn't matter whether MarkBufferDirty is executed before
the buffer content change is complete, so long as the content change is
completed before releasing exclusive lock on the buffer. So it's OK to set
the dirtybit before we fill in the LSN.
This eliminates the former kluge of needing to set the dirtybit in LockBuffer.
Aside from making the code more transparent, we can also add some new
debugging assertions, in particular that the caller of MarkBufferDirty must
hold the buffer content lock, not merely a pin.
startup or recovery process. Since such a process isn't a real backend,
pgstat.c gets confused. This accounts for recent reports of strange
"invalid server process ID -1" log messages during crash recovery.
There isn't any point in attempting to make the report, since we'll discard
stats in such scenarios anyhow.
This commit doesn't make much functional change, but it does eliminate some
duplicated code --- for instance, PageIsNew tests are now done inside
XLogReadBuffer rather than by each caller.
The GIST xlog code still needs a lot of love, but I'll worry about that
separately.
when an error occurs during xlog replay. Also, replace the former risky
'write into a fixed-size buffer with no overflow detection' API for XLOG
record description routines; use an expansible StringInfo instead. (The
latter accounts for most of the patch bulk.)
Qingqing Zhou
checkpoint in the bgwriter. This forestalls overflow of the fsync request
queue, which is not fatal but causes considerable performance degradation
when it occurs (because backends then have to do their own fsyncs). Per
patch from Itagaki Takahiro, modified a little bit by me.
files: avoid creating stats hashtable entries for tables that aren't being
touched except by vacuum/analyze, ensure that entries for dropped tables are
removed promptly, and tweak the data layout to avoid storing useless struct
padding. Also improve the performance of pgstat_vacuum_tabstat(), and make
sure that autovacuum invokes it exactly once per autovac cycle rather than
multiple times or not at all. This should cure recent complaints about 8.1
showing much higher stats I/O volume than was seen in 8.0. It'd still be a
good idea to revisit the design with an eye to not re-writing the entire
stats dataset every half second ... but that would be too much to backpatch,
I fear.
transaction as aborted. Since we only call XactLockTableWait on XIDs
that we believe to be currently running, the odds of this code ever
actually firing are minimal. It's certainly unnecessary, since a
transaction that's not either running or committed will be presumed
aborted anyway. What's more, it's not hard to imagine scenarios where
this could result in corrupting pg_clog: for instance, if a bogus XID
somehow got passed to XactLockTableWait. I think the code probably
dates from the ancient era when we didn't have TransactionIdIsInProgress;
back then it may have been necessary, but now I think it's a waste of
cycles and potentially dangerous. Per discussion with Qingqing Zhou
and Karsten Hilbert.
the relation but it finds a pre-existing valid buffer. The buffer does not
correspond to any page known to the kernel, so we *must* do smgrextend to
ensure that the space becomes allocated. The 7.x branches all do this
correctly, but the corner case got lost somewhere during 8.0 bufmgr rewrites.
(My fault no doubt :-( ... I think I assumed that such a buffer must be
not-BM_VALID, which is not so.)
an LWLock instead of a spinlock. This hardly matters on Unix machines
but should improve startup performance on Windows (or any port using
EXEC_BACKEND). Per previous discussion.
in favor of having just one set of macros that don't do HOLD/RESUME_INTERRUPTS
(hence, these correspond to the old SpinLockAcquire_NoHoldoff case).
Given our coding rules for spinlock use, there is no reason to allow
CHECK_FOR_INTERRUPTS to be done while holding a spinlock, and also there
is no situation where ImmediateInterruptOK will be true while holding a
spinlock. Therefore doing HOLD/RESUME_INTERRUPTS while taking/releasing a
spinlock is just a waste of cycles. Qingqing Zhou and Tom Lane.
file. The original code probed the PGPROC array separately for each PID,
which was not good for large numbers of backends: not only is the runtime
O(N^2) but most of it is spent holding ProcArrayLock. Instead, take the
lock just once and copy the active PIDs into an array, then use qsort
and bsearch so that the lookup time is more like O(N log N).
reduce contention for the former single LockMgrLock. Per my recent
proposal. I set it up for 16 partitions, but on a pgbench test this
gives only a marginal further improvement over 4 partitions --- we need
to test more scenarios to choose the number of partitions.
the data defining the semantics of a lock method (ie, conflict resolution
table and ancillary data, which is all constant) and the hash tables
storing the current state. The only thing we give up by this is the
ability to use separate hashtables for different lock methods, but there
is no need for that anyway. Put some extra fields into the LockMethod
definition structs to clean up some other uglinesses, like hard-wired
tests for DEFAULT_LOCKMETHOD and USER_LOCKMETHOD. This commit doesn't
do anything about the performance issues we were discussing, but it clears
away some of the underbrush that's in the way of fixing that.
SLRU area. The number of slots is still a compile-time constant (someday
we might want to change that), but at least it's a different constant for
each SLRU area. Increase number of subtrans buffers to 32 based on
experimentation with a heavily subtrans-bashing test case, and increase
number of multixact member buffers to 16, since it's obviously silly for
it not to be at least twice the number of multixact offset buffers.
if we already have a stronger lock due to the index's table being the
update target table of the query. Same optimization I applied earlier
at the table level. There doesn't seem to be much interest in the more
radical idea of not locking indexes at all, so do what we can ...
Also add a retry for Unixen returning EINTR, which hasn't been reported
as an issue but at least theoretically could be. Patch by Qingqing Zhou,
some minor adjustments by me.
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
that was added to localbuf.c in 8.1; therefore, applying it to a temp table
left corrupt lookup state in memory. The only case where this had a
significant chance of causing problems was an ON COMMIT DELETE ROWS temp
table; the other possible paths left bogus state that was unlikely to
be used again. Per report from Csaba Nagy.
to assume that the string pointer passed to set_ps_display is good forever.
There's no need to anyway since ps_status.c itself saves the string, and
we already had an API (get_ps_display) to return it.
I believe this explains Jim Nasby's report of intermittent crashes in
elog.c when %i format code is in use in log_line_prefix.
While at it, repair a previously unnoticed problem: on some platforms such as
Darwin, the string returned by get_ps_display was blank-padded to the maximum
length, meaning that lock.c's attempt to append " waiting" to it never worked.
advance its usage_count. This includes writes of dirty buffers triggered
by bgwriter, checkpoint, or FlushRelationBuffers, as well as various
corner cases that really ought not count as accesses to the page.
Should make for some marginal improvement in the quality of our decisions
about when to recycle buffers. Per suggestion from ITAGAKI Takahiro.
pointers, to ensure that compilers won't rearrange accesses to occur
while we're not holding the buffer header spinlock. It's probably
not necessary to mark volatile in every single place in bufmgr.c,
but better safe than sorry. Per trouble report from Kevin Grittner.
whether we seem to be running in a uniprocessor or multiprocessor.
The adjustment rules could probably still use further tweaking, but
I'm convinced this should be a win overall.
bytes. This shouldn't make any difference on x86 machines, where the size
happened to be 16 bytes anyway, but on 64-bit machines and machines with
slock_t int or wider, it will speed array indexing and hopefully reduce
SMP cache contention effects. Per recent experimentation.
to 'Size' (that is, size_t), and install overflow detection checks in it.
This allows us to remove the former arbitrary restrictions on NBuffers
etc. It won't make any difference in a 32-bit machine, but in a 64-bit
machine you could theoretically have terabytes of shared buffers.
(How efficiently we could manage 'em remains to be seen.) Similarly,
num_temp_buffers, work_mem, and maintenance_work_mem can be set above
2Gb on a 64-bit machine. Original patch from Koichi Suzuki, additional
work by moi.
computation. On modern machines this is as fast if not faster, and we
don't have to clog the CPU's L2 cache with a tens-of-KB pointer array.
If we ever decide to adopt a more dynamic allocation method for shared
buffers, we'll probably have to revert this patch, but in the meantime
we might as well save a few bytes and nanoseconds. Per Qingqing Zhou.
whenever we generate a new OID. This prevents occasional duplicate-OID
errors that can otherwise occur once the OID counter has wrapped around.
Duplicate relfilenode values are also checked for when creating new
physical files. Per my recent proposal.
exit, instead of trying to take shortcuts. Introduce some additional
shutdown callback routines to eliminate kluges like having ProcKill
be responsible for shutting down the buffer manager. Ensure that the
order of operations during shutdown is predictable and what you would
expect given the module layering.
max_files_per_process. Going further than that is just a waste of
cycles, and it seems that current Cygwin does not cope gracefully
with deliberately running the system out of FDs. Per Andrew Dunstan.
doesn't block the bgwriter from making progress writing out other buffers.
This was a hard problem in the context of the ARC/2Q design, but it's
trivial in the context of clock sweep ... just advance the sweep counter
before we try to write not after.
chdir into PGDATA and subsequently use relative paths instead of absolute
paths to access all files under PGDATA. This seems to give a small
performance improvement, and it should make the system more robust
against naive DBAs doing things like moving a database directory that
has a live postmaster in it. Per recent discussion.
(a/k/a SELECT INTO). Instead, flush and fsync the whole relation before
committing. We do still need the WAL log when PITR is active, however.
Simon Riggs and Tom Lane.
includes error checking and an appropriate ereport(ERROR) message.
This gets rid of rather tedious and error-prone manipulation of errno,
as well as a Windows-specific bug workaround, at more than a dozen
call sites. After an idea in a recent patch by Heikki Linnakangas.
it is sufficient to track whether a backend holds a lock or not, and
store information about transaction vs. session locks only in the
inside-the-backend LocalLockTable. Since there can now be but one
PROCLOCK per lock per backend, LockCountMyLocks() is no longer needed,
thus eliminating some O(N^2) behavior when a backend holds many locks.
Also simplify the LockAcquire/LockRelease API by passing just a
'sessionLock' boolean instead of a transaction ID. The previous API
was designed with the idea that per-transaction lock holding would be
important for subtransactions, but now that we have subtransactions we
know that this is unwanted. While at it, add an 'isTempObject' parameter
to LockAcquire to indicate whether the lock is being taken on a temp
table. This is not used just yet, but will be needed shortly for
two-phase commit.
a descriptor that uses the current transaction snapshot, rather than
SnapshotNow as it did before (and still does if INV_WRITE is set).
This means pg_dump will now dump a consistent snapshot of large object
contents, as it never could do before. Also, add a lo_create() function
that is similar to lo_creat() but allows the desired OID of the large
object to be specified. This will simplify pg_restore considerably
(but I'll fix that in a separate commit).
up have the standard layout with unused space between pd_lower and pd_upper.
When this is set, XLogInsert will omit the unused space without bothering
to scan it to see if it's zero. That saves time in XLogInsert, and also
allows reversion of my earlier patch to make PageRepairFragmentation et al
explicitly re-zero freed space. Per suggestion by Heikki Linnakangas.
Instead of a separate CRC on each backup block, include backup blocks
in their parent WAL record's CRC; this is important to ensure that the
backup block really goes with the WAL record, ie there was not a page
tear right at the start of the backup block. Implement a simple form
of compression of backup blocks: drop any run of zeroes starting at
pd_lower, so as not to store the unused 'hole' that commonly exists in
PG heap and index pages. Tweak PageRepairFragmentation and related
routines to ensure they keep the unused space zeroed, so that the above
compression method remains effective. All per recent discussions.
are now reported via elog, eliminating the need to test the result code
at most call sites. Make it possible for the caller to distinguish a
freshly acquired lock from one already held in the current transaction.
Use that capability to avoid redundant AcceptInvalidationMessages() calls
in LockRelation().
spotted by Qingqing Zhou. The HASH_ENTER action now automatically
fails with elog(ERROR) on out-of-memory --- which incidentally lets
us eliminate duplicate error checks in quite a bunch of places. If
you really need the old return-NULL-on-out-of-memory behavior, you
can ask for HASH_ENTER_NULL. But there is now an Assert in that path
checking that you aren't hoping to get that behavior in a palloc-based
hash table.
Along the way, remove the old HASH_FIND_SAVE/HASH_REMOVE_SAVED actions,
which were not being used anywhere anymore, and were surely too ugly
and unsafe to want to see revived again.
Also, remove the rather useless return value of LockReleaseAll. Change
response to detection of corruption in the shared lock tables to PANIC,
since that is the only way of cleaning up fully.
Originally an idea of Heikki Linnakangas, variously hacked on by
Alvaro Herrera and Tom Lane.
communication structure, and make it its own module with its own lock.
This should reduce contention at least a little, and it definitely makes
the code seem cleaner. Per my recent proposal.
memset() or MemSet() to a char *. For one, memset()'s first argument is
a void *, and further void * can be implicitly coerced to/from any other
pointer type.
is contention for a tuple-level lock. This solves the problem of a
would-be exclusive locker being starved out by an indefinite succession
of share-lockers. Per recent discussion with Alvaro.
Essentially, we shoehorn in a lockable-object-type field by taking
a byte away from the lockmethodid, which can surely fit in one byte
instead of two. This allows less artificial definitions of all the
other fields of LOCKTAG; we can get rid of the special pg_xactlock
pseudo-relation, and also support locks on individual tuples and
general database objects (including shared objects). None of those
possibilities are actually exploited just yet, however.
I removed pg_xactlock from pg_class, but did not force initdb for
that change. At this point, relkind 's' (SPECIAL) is unused and
could be removed entirely.
to eliminate unnecessary deadlocks. This commit adds SELECT ... FOR SHARE
paralleling SELECT ... FOR UPDATE. The implementation uses a new SLRU
data structure (managed much like pg_subtrans) to represent multiple-
transaction-ID sets. When more than one transaction is holding a shared
lock on a particular row, we create a MultiXactId representing that set
of transactions and store its ID in the row's XMAX. This scheme allows
an effectively unlimited number of row locks, just as we did before,
while not costing any extra overhead except when a shared lock actually
has to be shared. Still TODO: use the regular lock manager to control
the grant order when multiple backends are waiting for a row lock.
Alvaro Herrera and Tom Lane.
indexes. Replace all heap_openr and index_openr calls by heap_open
and index_open. Remove runtime lookups of catalog OID numbers in
various places. Remove relcache's support for looking up system
catalogs by name. Bulky but mostly very boring patch ...
avoid encroaching on the 'user' range of OIDs by allowing automatic
OID assignment to use values below 16k until we reach normal operation.
initdb not forced since this doesn't make any incompatible change;
however a lot of stuff will have different OIDs after your next initdb.
PageIndexTupleDelete() with a single pass of compactification ---
logic mostly lifted from PageRepairFragmentation. I noticed while
profiling that a VACUUM that's cleaning up a whole lot of deleted
tuples would spend as much as a third of its CPU time in
PageIndexTupleDelete; not too surprising considering the loop method
was roughly O(N^2) in the number of tuples involved.
to write out data that we are about to tell the filesystem to drop.
smgr_internal_unlink already had a DropRelFileNodeBuffers call to
get rid of dead buffers without a write after it's no longer possible
to roll back the deleting transaction. Adding a similar call in
smgrtruncate simplifies callers and makes the overall division of
labor clearer. This patch removes the former behavior that VACUUM
would write all dirty buffers of a relation unconditionally.
the freelist, plus per-buffer spinlocks that protect access to individual
shared buffer headers. This requires abandoning a global freelist (since
the freelist is a global contention point), which shoots down ARC and 2Q
as well as plain LRU management. Adopt a clock sweep algorithm instead.
Preliminary results show substantial improvement in multi-backend situations.
no held locks. This maintains the invariant that proclocks are present
only for procs that are holding or awaiting a lock; when this is not
true, LockRelease will fail. Per report from Stephen Clouse.
Tom Lane
Bruce Momjian
Peter Eisentraut
Neil Conway
Tatsuo Ishii