In the original coding, setting a single reloption would cause default
values to be used for all the other reloptions. This is a problem
particularly for autovacuum reloptions.
Itagaki Takahiro
script.
To do this, have pg_ctl pass down its parent shell's PID in an environment
variable PG_GRANDPARENT_PID, and teach CreateLockFile() to disregard that PID
as a false match if it finds it in postmaster.pid. This allows us to cope
with one level of postgres-owned shell process even with pg_ctl in the way,
so it's just as safe as starting the postmaster directly. You still have to
be careful about how you write the initscript though.
Adjust the comments in contrib/start-scripts/ to not deprecate use of
pg_ctl. Also, fix the ROTATELOGS option in the OSX script, which was
indulging in exactly the sort of unsafe coding that renders this fix
pointless :-(. A pipe inside the "sudo" will probably result in more
than one postgres-owned process hanging around.
was incorrectly initialized with timeline ID 0. That rendered the WAL page
unrecoverable, making a subsequent archive recovery stop at that point.
ThisTimeLineID needs to be initialized before calling AdvanceXLInsertBuffer().
This fixes bug #5011 reported by James Bardin. Backpatch to 8.4, as the bug
was introduced by the changes to use of bgwriter for writing the
end-of-archive-recovery checkpoint. Patch by Tom Lane.
Update install-sh to that from Autoconf 2.63, plus our Darwin-specific
changes (which I simplified a bit). install-sh is now able to install
multiple files in one run, so we could simplify our makefiles sometime.
install-sh also now has a -d option to create directories, so we don't need
mkinstalldirs anymore.
Use AC_PROG_MKDIR_P in configure.in, so we can use mkdir -p when available
instead of install-sh -d. For consistency with the rest of the world,
the corresponding make variable has been renamed from $(mkinstalldirs) to
$(MKDIR_P).
Instead of sending stdout/stderr to /dev/null after forking away from the
terminal, send them to postmaster.log within the data directory. Since
this opens the door to indefinite logfile bloat, recommend even more
strongly that log output be redirected when using silent_mode.
Move the postmaster's initial calls of load_hba() and load_ident() down
to after we have started the log collector, if we are going to. This
is so that errors reported by them will appear in the "usual" place.
Reclassify silent_mode as a LOGGING_WHERE, not LOGGING_WHEN, parameter,
since it's got absolutely nothing to do with the latter category.
In passing, fix some obsolete references to -S ... this option hasn't
had that switch letter for a long time.
Back-patch to 8.4, since as of 8.4 load_hba() and load_ident() are more
picky (and thus more likely to fail) than they used to be. This entire
change was driven by a complaint about those errors disappearing into
the bit bucket.
This causes problems when the system load is high, per report from Zdenek
Kotala in <1250860954.1239.114.camel@localhost>; instead of calling kill
directly, have the signal handler set a flag which is checked in ServerLoop.
This way, the handler can return before being called again by a subsequent
signal sent from the autovacuum launcher. Also, increase the sleep in the
launcher in this failure path to 1 second.
Backpatch to 8.3, which is when the signalling between autovacuum
launcher/postmaster was introduced.
Also, add a couple of ReleasePostmasterChildSlot calls in error paths; this
part backpatched to 8.4 which is when the child slot stuff was introduced.
"all tuples visible" flag in heap page headers. The flag update *must*
be applied before calling XLogInsert, but heap_update and the tuple
moving routines in VACUUM FULL were ignoring this rule. A crash and
replay could therefore leave the flag incorrectly set, causing rows
to appear visible in seqscans when they should not be. This might explain
recent reports of data corruption from Jeff Ross and others.
In passing, do a bit of editorialization on comments in visibilitymap.c.
or previously truncated in the current (sub)transaction. This is safe since
if the (sub)transaction later rolls back, we'd just discard the rel's current
physical file anyway. This avoids unreasonable growth in the number of
transient files when a relation is repeatedly truncated. Per a performance
gripe a couple weeks ago from Todd Cook.
values before they get passed to the index access method. This avoids
repeated detoastings that will otherwise ensue as the comparison value
is examined by various index support functions. We have seen a couple of
reports of cases where repeated detoastings result in an order-of-magnitude
slowdown, so it seems worth adding a bit of extra logic to prevent this.
I had previously proposed trying to avoid duplicate detoastings in general,
but this fix takes care of what seems the most important case in practice
with very little effort or risk.
Back-patch to 8.4 so that the PostGIS folk won't have to wait a year to
have this fix in a production release. (The issue exists further back,
of course, but the code's diverged enough to make backpatching further a
higher-risk action. Also it appears that the possible gains may be limited
in prior releases because of different handling of lossy operators.)
about it doesn't simplify the grammar at all, and it does invite confusion
among those who only read the SELECT syntax summary and not the full details.
Per gripe from Jaime Casanova.
physical conversion when there are dropped columns in the same places in
the input and output tupdescs. This avoids possible performance loss from
the recent patch to improve dropped-column handling, in some cases where
the old code would have worked.
truncate_identifier won't do anything if the passed-in strlen is already
less than NAMEDATALEN, which it always would be given the strlcpy usage.
This has been broken since the arrays-of-composite-types code went in.
Arguably truncate_identifier is suffering from excessive optimization
and should always process the string, but for the moment I'll take the
more localized patch.
Per bug #4987.
I mistakenly removed it last month, thinking it was no longer needed ---
but it is still needed for dealing with joininfo lists. Fortunately this
bit of brain fade hadn't made it into any released versions yet.
does match some unique index on the referenced table, but that index is
only deferrably unique. We were doing this nicely for the
default-to-primary-key case, but were being lazy for the other case.
Dean Rasheed
To make this work in the base case, pg_database now has a nailed-in-cache
relation descriptor that is initialized using hardwired knowledge in
relcache.c. This means pg_database is added to the set of relations that
need to have a Schema_pg_xxx macro maintained in pg_attribute.h. When this
path is taken, we'll have to do a seqscan of pg_database to find the row
we need.
In the normal case, we are able to do an indexscan to find the database's row
by name. This is made possible by storing a global relcache init file that
describes only the shared catalogs and their indexes (and therefore is usable
by all backends in any database). A new backend loads this cache file,
finds its database OID after an indexscan on pg_database, and then loads
the local relcache init file for that database.
This change should effectively eliminate number of databases as a factor
in backend startup time, even with large numbers of databases. However,
the real reason for doing it is as a first step towards getting rid of
the flat files altogether. There are still several other sub-projects
to be tackled before that can happen.
to access a Relation entry it had just closed. I happened to be testing with
CLOBBER_CACHE_ALWAYS, which made this a guaranteed core dump (at least on
machines where sprintf %s isn't forgiving of a NULL pointer). It's probably
quite unlikely that it would fail in the field, but a bug is a bug. Fix by
moving the relation_close call down past the logging action.
Test coverage support now covers the entire source tree, including
contrib, instead of just src/backend. In a related but independent
development, the commands make coverage and make coverage-html can be run
in any directory.
This turned out to be much easier than feared. Besides a few ad hoc fixes
to pass the make target down the tree, change all affected makefiles to
list their directories in the SUBDIRS variable, changed from variants like
DIRS and WANTED_DIRS. MSVC build fix was attempted as well.
if a smart shutdown is already in progress. Backpatch to 8.3, this was broken
in the patch that introduced "dead-end backends".
Per report by Itagaki Takahiro, patch by Fujii Masao.
by supporting conversions in places that used to demand exact rowtype match.
Since this issue is certain to come up elsewhere (in fact, already has,
in ExecEvalConvertRowtype), factor out the support code into new core
functions for tuple conversion. I chose to put these in a new source
file since heaptuple.c is already overly long.
Heavily revised version of a patch by Pavel Stehule.
fsync() fails, say "file" rather than "relation" when printing the filename.
This makes messages that display block numbers a bit confusing. For example,
in message 'could not read block 150000 of file "base/1234/5678.1"', 150000
is the block number from the beginning of the relation, ie. segment 0, not
150000th block within that segment. Per discussion, users aren't usually
interested in the exact location within the file, so we can live with that.
To ease constructing error messages, add FilePathName(File) function to
return the pathname of a virtual fd.
Both hex format and the traditional "escape" format are automatically
handled on input. The output format is selected by the new GUC variable
bytea_output.
As committed, bytea_output defaults to HEX, which is an *incompatible
change*. We will keep it this way for awhile for testing purposes, but
should consider whether to switch to the more backwards-compatible
default of ESCAPE before 8.5 is released.
Peter Eisentraut
Add family of functions that did not exist earlier,
mainly due to historical omission. Original patch by
Abhijit Menon-Sen, with review and modifications by
Joe Conway. catversion.h bumped.
values being complained of.
In passing, also remove the arbitrary length limitation in the similar
error detail message for foreign key violations.
Itagaki Takahiro
This patch gets us out from under the Unix limitation of two user-defined
signal types. We already had done something similar for signals directed to
the postmaster process; this adds multiplexing for signals directed to
backends and auxiliary processes (so long as they're connected to shared
memory).
As proof of concept, replace the former usage of SIGUSR1 and SIGUSR2
for backends with use of the multiplexing mechanism. There are still some
hard-wired definitions of SIGUSR1 and SIGUSR2 for other process types,
but getting rid of those doesn't seem interesting at the moment.
Fujii Masao
This was foreseen to be a good idea long ago, but nobody had got round
to doing it. The recent patch for deferred unique constraints made
transformConstraintAttrs() ugly enough that I decided it was time.
This change will also greatly simplify parsing of deferred CHECK constraints,
if anyone ever gets around to implementing that.
While at it, add a location field to Constraint, and use that to provide
an error cursor for some of the constraint-related error messages.
include a fractional part in the output for MILLISECOND and SECOND cases,
rather than truncating the source value. This is what the float-timestamp
code has always done, and it was clearly the code author's intent to do
the same for integer timestamps, but he forgot about integer division in C.
The other datatypes supported by EXTRACT() already do this correctly.
Backpatch to 8.4, so that the default (integer) behavior of that branch will
match the default (float) behavior of older branches. Arguably we should
patch further back, but it's possible that applications are expecting the
broken behavior in older branches. 8.4 is new enough that expectations
shouldn't be too settled.
Per report from Greg Stark.
The current implementation fires an AFTER ROW trigger for each tuple that
looks like it might be non-unique according to the index contents at the
time of insertion. This works well as long as there aren't many conflicts,
but won't scale to massive unique-key reassignments. Improving that case
is a TODO item.
Dean Rasheed
we should ignore NULL array entries, not non-NULL ones. This had the
effect of disabling commit_delay, and could have caused a crash in the
rare race condition the patch was intended to fix.
Bug report and diagnosis by Jeff Janes, in bug #4952.
conindid is the index supporting a constraint. We can use this not only for
unique/primary-key constraints, but also foreign-key constraints, which
depend on the unique index that constrains the referenced columns.
tgconstrindid is just copied from the constraint's conindid field, or is
zero for triggers not associated with constraints.
This is mainly intended as infrastructure for upcoming patches, but it has
some virtue in itself, since it exposes a relationship that you formerly
had to grovel in pg_depend to determine. I simplified one information_schema
view accordingly. (There is a pg_dump query that could also use conindid,
but I left it alone because it wasn't clear it'd get any faster.)
The original syntax made it difficult to add options without making them
into reserved words. This change parenthesizes the options to avoid that
problem, and makes provision for an explicit (and perhaps non-Boolean)
value for each option. The original syntax is still supported, but only
for the two original options ANALYZE and VERBOSE.
As a test case, add a COSTS option that can suppress the planner cost
estimates. This may be useful for including EXPLAIN output in the regression
tests, which are otherwise unable to cope with cross-platform variations in
cost estimates.
Robert Haas
This is believed to not change the output at all, with one known exception:
"Subquery Scan foo" becomes "Subquery Scan on foo". (We can fix that if
anyone complains, but it would be a wart, because the old code was clearly
inconsistent.) The main intention is to remove duplicate coding and
provide a cleaner base for subsequent EXPLAIN patching.
Robert Haas
that memory allocated by starting third party DLLs doesn't end up
conflicting with it.
Hopefully this solves the long-time issue with "could not reattach
to shared memory" errors on Win32.
Patch from Tsutomu Yamada and me, based on idea from Trevor Talbot.
a physical tuple in do_tup_output(). A virtual tuple is easier to set up
and also easier for most tuple receivers to process. Per my comment on
Robert Haas' recent patch in this code.
of individually pfree'ing pass-by-reference transition values. This should
be at least as fast as the prior coding, and it has the major advantage of
clearing out any working data an aggregate function may have stored in or
underneath the aggcontext. This avoids memory leakage when an aggregate
such as array_agg() is used in GROUP BY mode. Per report from Chris Spotts.
Back-patch to 8.4. In principle the problem could arise in prior versions,
but since they didn't have array_agg the issue seems not critical.
for the case that the semijoin was implemented within either input by
unique-ifying its RHS before we test to see if it appears to match the current
join situation. The previous coding would select semijoin logic in situations
where we'd already unique-ified the RHS and joined it to some unrelated
relation(s), and then came to join it to the semijoin's LHS. That still gave
the right answer as far as the semijoin itself was concerned, but would lead
to incorrectly examining only an arbitrary one of the matchable rows from the
unrelated relation(s). The cause of this thinko was incorrect unification of
the pre-8.4 logic for IN joins and OUTER joins --- the comparable case for
outer joins can be handled after making the match test, but that's because
there is nothing like the unique-ification escape hatch for outer joins.
Per bug #4934 from Benjamin Reed.
so it doesn't go through BuildTupleFromCStrings. This is more or less a
wash for current uses, but will avoid inefficiency for planned changes to
EXPLAIN.
Robert Haas
not forced out-of-line unless that is necessary to make the row fit on a
page. Previously, they were forced out-of-line if needed to get the row
down to the default target size (1/4th page).
Kevin Grittner
It appears that, for no particularly good reason, pg_listener.h deviates from
the usual convention for declaring attribute number constants. Normally, it's
#define Anum_{catalog-name}_{column-name} {attribute-number}
pg_listener.h, however substitutes a different string that is similar, but not
the same as, the column name. This change fixes that.
Author: Robert Haas <robertmhaas@gmail.com>
by using a lookup table instead of a naive shift-and-count loop. Based on
code originally posted by Sean Eron Anderson at
http://graphics.stanford.edu/%7eseander/bithacks.html.
Greg Stark did the research and benchmarking to show that this is what
we should use. Jeremy Kerr first noticed that this is a hotspot that
could be optimized, though we ended up not using his suggestion of
platform-specific bit-searching code.
reorder a semijoin into or out of the righthand side of another semijoin,
but actually it doesn't work to reorder it into or out of the righthand
side of a left or antijoin, either. Per bug #4906 from Mathieu Fenniak.
This was sloppy thinking on my part. This identity does work:
( A left join B on (Pab) ) semijoin C on (Pac)
==
( A semijoin C on (Pac) ) left join B on (Pab)
but I failed to see that that doesn't mean this does:
( A left join B on (Pab) ) semijoin C on (Pbc)
!=
A left join ( B semijoin C on (Pbc) ) on (Pab)
foo <> false, along with its previous duties of simplifying foo = true
and foo = false. (All of these are equivalent to just foo or NOT foo
as the case may be.) It's not clear how often this is really useful;
but it costs almost nothing to do, and it seems some people think we
should be smart about such cases. Per recent bug report.
sequence, even when the input "tour" doesn't lead directly to such a sequence.
The stack logic that was added in 2004 only supported cases where relations
that had to be joined to each other (due to join order restrictions) were
adjacent in the tour. However, relying on a random search to figure that out
is tremendously inefficient in large join problems, and could even fail
completely (leading to "failed to make a valid plan" errors) if
random_init_pool ran out of patience. It seems better to make the
tour-to-plan transformation a little bit fuzzier so that every tour can form
a legal plan, even though this means that apparently different tours will
sometimes yield the same plan.
In the same vein, get rid of the logic that knew that tours (a,b,c,d,...)
are the same as tours (b,a,c,d,...), and therefore insisted the latter
are invalid. The chance of generating two tours that differ only in
this way isn't that high, and throwing out 50% of possible tours to
avoid such duplication seems more likely to waste valuable genetic-
refinement generations than to do anything useful.
This leaves us with no cases in which geqo_eval will deem a tour invalid,
so get rid of assorted kluges that tried to deal with such cases, in
particular the undocumented assumption that DBL_MAX is an impossible
plan cost.
This is all per testing of Robert Haas' lets-remove-the-collapse-limits
patch. That idea has crashed and burned, at least for now, but we still
got something useful out of it.
It's possible we should back-patch this change, since the "failed to make a
valid plan" error can happen in existing releases; but I'd rather not until
it has gotten more testing.
by unique-ifying the RHS and then inner-joining to some other relation,
that is not grounds for violating the RHS of some other outer join.
Noticed while regression-testing new GEQO code, which will blindly follow
any path that join_is_legal says is legal, and then complain later if that
leads to a dead end.
I'm not certain that this can result in any visible failure in 8.4: the
mistake may always be masked by the fact that subsequent attempts to join
the rest of the RHS of the other join will fail. But I'm not certain it
can't, either, and it's definitely not operating as intended. So back-patch.
The added regression test depends on the new no-failures-allowed logic
that I'm about to commit in GEQO, so no point back-patching that.
memory leakage in error recovery. We were calling FreeExprContext, and
therefore invoking ExprContextCallback callbacks, in both normal and error
exits from subtransactions. However this isn't very safe, as shown in
recent trouble report from Frank van Vugt, in which releasing a tupledesc
refcount failed. It's also unnecessary, since the resources that callbacks
might wish to release should be cleaned up by other error recovery mechanisms
(ie the resource owners). We only really want FreeExprContext to release
memory attached to the exprcontext in the error-exit case. So, add a bool
parameter to FreeExprContext to tell it not to call the callbacks.
A more general solution would be to pass the isCommit bool parameter on to
the callbacks, so they could do only safe things during error exit. But
that would make the patch significantly more invasive and possibly break
third-party code that registers ExprContextCallback callbacks. We might want
to do that later in HEAD, but for now I'll just do what seems reasonable to
back-patch.
that the sanity checking I added to create_mergejoin_plan() in 8.3 was a
few bricks shy of a load: the mergeclauses could reference pathkeys in a
noncanonical order such as x,y,x, not only cases like x,x,y which is all
that the code had allowed for. The odd cases only turn up when using
redundant clauses in an outer join condition, which is why no one had
noticed before.
random number seed each time. This is how it used to work years ago, but
we got rid of the seed reset because it was resetting the main random()
sequence and thus having undesirable effects on the rest of the system.
To fix, establish a private random number state for each execution of
geqo(), and initialize the state using the new GUC variable geqo_seed.
People who want to experiment with different random searches can do so
by changing geqo_seed, but you'll always get the same plan for the same
value of geqo_seed (if holding all other planner inputs constant, of course).
The new state is kept in PlannerInfo by adding a "void *" field reserved
for use by join_search hooks. Most of the rather bulky code changes in
this commit are just arranging to pass PlannerInfo around to all the GEQO
functions (many of which formerly didn't receive it).
Andres Freund, with some editorialization by Tom
This alters various incidental uses of C++ key words to use other similar
identifiers, so that a C++ compiler won't choke outright. You still
(probably) need extern "C" { }; around the inclusion of backend headers.
based on a patch by Kurt Harriman <harriman@acm.org>
Also add a script cpluspluscheck to check for C++ compatibility in the
future. As of right now, this passes without error for me.
Changes:
Pass in the keyword lookup array instead of having it be hardwired.
(This incidentally allows elimination of some duplicate coding in ecpg.)
Re-order the token declarations in gram.y so that non-keyword tokens have
numbers that won't change when keywords are added or removed.
Add ".." and ":=" to the set of tokens recognized by scan.l. (Since these
combinations are nowhere legal in core SQL, this does not change anything
except the precise wording of the error you get when you write this.)
RevalidateCachedPlan. This is to avoid a "SPI_ERROR_CONNECT" failure when
the planner calls a SPI-using function and we are already inside one.
The alternative fix is to expect callers of RevalidateCachedPlan to do this,
which seems likely to result in additional hard-to-detect bugs of omission.
Per reports from Frank van Vugt and Marek Lewczuk.
Back-patch to 8.3. It's much harder to trigger the bug in 8.3, due to a
smaller set of cases in which plans can be invalidated, but it could happen.
(I think perhaps only a SI reset event could make 8.3 fail here, but that's
certainly within the realm of possibility.)
size_t arguments, the emitted scanner actually prototypes them with
type yy_size_t, which is sometimes not the same thing depending on
flex version and platform. Easiest fix seems to be to use yy_size_t.
Per buildfarm results.
of features added to flex and bison since this code was originally written.
This change doesn't in itself offer any new capability, but it's needed
infrastructure for planned improvements in plpgsql.
Another feature now available in flex is the ability to make it use palloc
instead of malloc, so do that to avoid possible memory leaks. (We should
at some point change the other lexers likewise, but this commit doesn't
touch them.)
distinction between the external API (parser.h) and declarations that only
need to be visible within the raw parser code (gramparse.h, which now is only
included by parser.c, gram.y, scan.l, and keywords.c). This is in preparation
for the upcoming change to a reentrant lexer, which will require referencing
YYSTYPE in the declarations of base_yylex and filtered_base_yylex, hence
gram.h will have to be included by gramparse.h. We don't want any more files
than absolutely necessary to depend on gram.h, so some cleanup is called for.
RelOptInfo targetlist. It used to be that the only possibility other than
a Var was a RowExpr representing a whole-row child Var, but as of 8.4's
expanded ability to flatten appendrel members, we can get arbitrary expressions
in there. Use the expression's type info and get_typavgwidth() to produce
an at-least-marginally-sane result. Note that get_typavgwidth()'s fallback
estimate (32 bytes) is the same as what was here before, so there will be
no behavioral change for RowExprs. Noted while looking at recent gripe
about constant quals pushed down to FunctionScan appendrel members ...
not only were we failing to recognize the constant qual, we were getting
the width estimate wrong :-(
LC_CTYPE settings to children via BackendParameters. Per discussion,
the postmaster is now just using system defaults anyway, so we might as
well save a few cycles during backend startup.
Otherwise, the LC_CTYPE/COLLATE setting gets reverted when using plperl, which
leads to incorrect query results and index corruption.
This was accidentally broken in the per-database locale patch in 8.4. Pointed
out by Andrew Gierth.
For character types with typmod, character_octet_length columns in the
information schema now show the maximum character length times the
maximum length of a character in the server encoding, instead of some
huge value as before.
timestamp_trunc, timestamptz_trunc, and interval_trunc(). This change
only affects the float-datetime case; the integer-datetime case already
behaved like truncation instead of rounding. Per gripe from Mario Splivalo.
This is a pre-existing issue but I'm choosing not to backpatch, because
it's such a corner case and there have not been prior complaints. The
issue is largely moot anyway given the trend towards integer datetimes.
substituting a child rel's output expressions into the appendrel's restriction
clauses yields a pseudoconstant restriction. We might be able to skip scanning
that child rel entirely (if we get constant FALSE), or generate a one-time
filter. 8.3 more or less accidentally generated plans that weren't completely
stupid in these cases, but that was only because an extra recursive level of
subquery_planner() always occurred and allowed const-simplification to happen.
8.4's ability to pull up appendrel members with non-Var outputs exposes the
fact that we need to work harder here. Per gripe from Sergey Burladyan.
parentheses around the <query expression body> that follows a WITH clause, eg
with cte(foo) as ( values(0) ) ((select foo from cte));
This seems to be just an oversight/thinko in gram.y. Noted while
experimenting with bug #4902.
the "cteParam" as a proxy for the possibility that the underlying CTE plan
depends on outer-level variables or Params, but that doesn't work very well
because it sometimes causes calling subqueries to be treated as SubPlans when
they could be InitPlans. This is inefficient and also causes the outright
failure exhibited in bug #4902. Instead, leave the cteParam out of it and
copy the underlying CTE plan's extParams directly. Per bug #4902 from
Marko Tiikkaja.
archive recovery. Invent a separate state variable and inquiry function
for XLogInsertAllowed() to clarify some tests and make the management of
writing the end-of-recovery checkpoint less klugy. Fix several places
that were incorrectly testing InRecovery when they should be looking at
RecoveryInProgress or XLogInsertAllowed (because they will now be executed
in the bgwriter not startup process). Clarify handling of bad LSNs passed
to XLogFlush during recovery. Use a spinlock for setting/testing
SharedRecoveryInProgress. Improve quite a lot of comments.
Heikki and Tom
during it:
When bgwriter is active, the startup process can't perform mdsync() correctly
because it won't see the fsync requests accumulated in bgwriter's private
pendingOpsTable. Therefore make bgwriter responsible for the end-of-recovery
checkpoint as well, when it's active.
When bgwriter is active (= archive recovery), the startup process must not
accumulate fsync requests to its own pendingOpsTable, since bgwriter won't
see them there when it performs restartpoints. Make startup process drop its
pendingOpsTable when bgwriter is launched to avoid that.
Update minimum recovery point one last time when leaving archive recovery.
It won't be updated by the end-of-recovery checkpoint because XLogFlush()
sees us as out of recovery already.
This fixes bug #4879 reported by Fujii Masao.
acting like runs inside WAL recovery, but it doesn't. I must've copy-pasted
this from a redo-function in the relation forks patch. Noticed by Tom Lane
while he was looking through callers of smgrdounlink().
a number of other geometric operators also depend on. It miscalculated the
slope of the perpendicular to the given line segment anytime that slope was
other than 0, infinite, or +/-1. In some cases the error would be masked
because the true closest point on the line segment was one of its endpoints
rather than the intersection point, but in other cases it could give an
arbitrarily bad answer. Per bug #4872 from Nick Roosevelt.
Bug goes clear back to Berkeley days, so patch all supported branches.
Make a couple of cosmetic adjustments while at it.
of the 256KB limit originally enforced by a patch committed 2008-11-06.
Per recent test results, the smaller size resulted in an undesirable decrease
in bulk data loading speed, due to COPY processing frequently getting blocked
for WAL flushing. This area might need more tweaking later, but this setting
seems to be good enough for 8.4.
even when not in FM mode. This improves compatibility with Oracle and with
our pre-8.4 behavior, as per bug #4862.
Brendan Jurd
Add a couple of regression test cases for this. In passing, get rid of the
labeling of the individual test cases; doesn't seem to be good for anything
except causing extra work when inserting a test...
Tom Lane
ArrayBuildState, per trouble report from Merlin Moncure. By adopting
this fix, we are essentially deciding that aggregate final-functions
should not modify their inputs ever. Adjust documentation and comments
to match that conclusion.
types in CREATE TRIGGER. While at it, clean up the amazingly tedious and
inextensible way that the trigger event type list was handled. Per report
from Greg Sabino Mullane.
aggregated tuple of a run. Per report from Laurenz Albe. This is a new
bug in 8.4, but only because prior versions rejected SRFs in an Agg plan
node altogether.
function returning setof record. This used to work, more or less
accidentally, but I had broken it while extending the code to allow
materialize-mode functions to be called in select lists. Add a regression
test case so it doesn't get broken again. Per gripe from Greg Davidson.
rsinfo->expectedDesc == NULL in deflist_to_tuplestore(), but that doesn't
look very safe to me. Noted in passing while studying problem report
from Greg Davidson.
node starts from the same place as the first scan did. This avoids surprising
behavior of scrollable and WITH HOLD cursors, as seen in Mark Kirkwood's bug
report of yesterday.
It's not entirely clear whether a rescan should be forced to drop out of the
syncscan mode, but for the moment I left the code behaving the same on that
point. Any change there would only be a performance and not a correctness
issue, anyway.
Back-patch to 8.3, since the unstable behavior was created by the syncscan
patch.
eg Japan. Report and fix by Itagaki Takahiro. Also fix CASHDEBUG printout
format for branches with 64-bit money type, and some minor comment cleanup.
Back-patch to 7.4, because it's broken all the way back.
In particular, always show 0 for the date type instead of null, and show
6 (the default) for time, timestamp, and interval without a declared
precision. This is now in fuller conformance with the SQL standard.
Also clarify the documentation about this.
discovered and analyzed by Konstantin Izmailov and Tom Lane
more consistent with other cases, by having an unlabeled integer field
be treated as a number of minutes or seconds respectively. These cases
are outside the spec (which insists on full "dd hh:mm" or "dd hh:mm:ss"
input respectively), so it's not much help to us in deciding what to do.
But with this change, it's uniformly the case that an unlabeled integer
will be considered as being a number of the interval's rightmost field.
The change also takes us back to the 8.3 behavior of throwing error
for certain ambiguous inputs such as INTERVAL '1 2' DAY TO MINUTE.
Per recent discussion.
Sergey Burladyan, there are at least some dank corners of libxml2 that
assume this behavior, even though their published documentation suggests
they shouldn't.
This is only really a live problem in 8.3, but the code is still there
for possible debugging use in HEAD, so patch both branches.
"array_agg_finalfn(null)". We should modify pg_proc entries to prevent this
query from being accepted, but let's just make the function itself secure too.
Per my note of today.
behavior in cases where we don't know the heap tuple count accurately; in
particular partial vacuum, but this also makes the API a bit more useful
for ANALYZE. This patch adds "estimated_count" flags to both structs so
that an approximate count can be flagged as such, and adjusts the logic
so that approximate counts are not used for updating pg_class.reltuples.
This fixes my previous complaint that VACUUM was putting ridiculous values
into pg_class.reltuples for indexes. The actual impact of that bug is
limited, because the planner only pays attention to reltuples for an index
if the index is partial; which probably explains why beta testers hadn't
noticed a degradation in plan quality from it. But it needs to be fixed.
The whole thing is a bit messy and should be redesigned in future, because
reltuples now has the potential to drift quite far away from reality when
a long period elapses with no non-partial vacuums. But this is as good as
it's going to get for 8.4.
is supposed to remove duplicate heap TIDs, we have to be sure to reduce the
tuple size and posting-item count accordingly in addItemPointersToTuple().
Failing to do so resulted in the effective injection of garbage TIDs into the
index contents, ie, whatever happened to be in the memory palloc'd for the
new tuple. I'm not sure that this fully explains the index corruption
reported by Tatsuo Ishii, but the test case I'm using no longer fails.
by extending the ereport() API to cater for pluralization directly. This
is better than the original method of calling ngettext outside the elog.c
code because (1) it avoids double translation, which wastes cycles and in
the worst case could give a wrong result; and (2) it avoids having to use
a different coding method in PL code than in the core backend. The
client-side uses of ngettext are not touched since neither of these concerns
is very pressing in the client environment. Per my proposal of yesterday.
symbolic links with the -l option, and as Fujii Masao pointed out we ended up
overwriting files in the archive directory before this patch. Patch by
Aidan Van Dyk, Fujii Masao and me.
Backpatch to 8.3, where pg_standby was introduced.
grounds that they don't fit into the specified interval qualifier (typmod).
This behavior, while of long standing, is clearly wrong per spec --- for
example the value INTERVAL '999' SECOND means 999 seconds and should not be
reduced to less than 60 seconds.
In some cases there could be grounds to raise an error if higher-order field
values are not given as zero; for example '1 year 1 month'::INTERVAL MONTH
should arguably be taken as an error rather than equivalent to 13 months.
However our internal representation doesn't allow us to do that in a fashion
that would consistently reject all and only the cases that a strict reading
of the spec would suggest. Also, seeing that for example INTERVAL '13' MONTH
will print out as '1 year 1 mon', we have to be careful not to create a
situation where valid data will fail to dump and reload. The present patch
therefore takes the attitude of not throwing an error in any such case.
We might want to revisit that in future but it would take more redesign
than seems prudent in late beta.
Per a complaint from Sebastien Flaesch and subsequent discussion. While
at other times we might have just postponed such an issue to the next
development cycle, 8.4 already has changed the parsing of interval literals
quite a bit in an effort to accept all spec-compliant cases correctly.
This seems like a change that should be part of that rather than coming
along later.
YEAR, DECADE, CENTURY, or MILLENIUM fields, just as it always has done for
other types of fields. The previous behavior seems to have been a hack to
avoid defining bit-positions for all these field types in DTK_M() masks,
rather than something that was really considered to be desired behavior.
But there is room in the masks for these, and we really need to tighten up
at least the behavior of DAY and YEAR fields to avoid unexpected behavior
associated with the 8.4 changes to interpret ambiguous fields based on the
interval qualifier (typmod) value. Per my example and proposed patch.
queries frequently took no lock at all on individual indexes. That's not
true any more, but we still need lock on the parent table to make it safe
to use cached lists of index OIDs.
throwing an error as 8.4 had been doing. The error interfered with porting
old database definitions (particularly for pg_migrator) without really buying
any safety. Per bug #4817 and subsequent discussion.
an expression that's not supposed to contain variables. Per discussion
with Gevik Babakhani, this eliminates the need for an ugly kluge (namely,
specifying some unrelated relation name). Remove one such kluge from
pg_dump.
of time values that would not be accepted via textual input.
Per gripe from Andrew McNamara.
This is potentially a back-patchable bug fix, but for the moment it doesn't
seem sufficiently high impact to justify doing that.
this case is worth a special code path, but a special code path that gets
the boundary condition wrong is definitely no good. Per bug #4821 from
Andrew Gierth.
In passing, clean up some minor code formatting issues (excess parentheses
and blank lines in odd places).
Back-patch to 8.3, where the bug was introduced.
there's no analyzable attributes or indexes. We also used to report 0 live
and dead tuples for such tables, which messed with autovacuum threshold
calculations.
This fixes bug #4812 reported by George Su. Backpatch back to 8.1.
copies?) to ensure they really don't run proc_exit/shmem_exit callbacks,
as was intended. I broke this behavior recently by installing atexit
callbacks without thinking about the one case where we truly don't want
to run those callback functions. Noted in an example from Dave Page.
is run at the end of archive recovery, providing a chance to do external
cleanup. Modify pg_standby so that it no longer removes the trigger file,
that is to be done using the recovery_end_command now.
Provide a "smart" failover mode in pg_standby, where we don't fail over
immediately, but only after recovering all unapplied WAL from the archive.
That gives you zero data loss assuming all WAL was archived before
failover, which is what most users of pg_standby actually want.
recovery_end_command by Simon Riggs, pg_standby changes by Fujii Masao and
myself.
that aren't RELKIND_RELATION or RELKIND_VIEW, and to disallow attaching rules
to system relations unless allowSystemTableMods is on. This is to make the
behavior of CREATE RULE more like CREATE TRIGGER, which disallows the
comparable cases. Per discussion of bug #4808.
redirecting libxml's allocations into a Postgres context. Instead, just let
it use malloc directly, and add PG_TRY blocks as needed to be sure we release
libxml data structures in error recovery code paths. This is ugly but seems
much more likely to play nicely with third-party uses of libxml, as seen in
recent trouble reports about using Perl XML facilities in pl/perl and bug
#4774 about contrib/xml2.
I left the code for allocation redirection in place, but it's only
built/used if you #define USE_LIBXMLCONTEXT. This is because I found it
useful to corral libxml's allocations in a palloc context when hunting
for libxml memory leaks, and we're surely going to have more of those
in the future with this type of approach. But we don't want it turned on
in a normal build because it breaks exactly what we need to fix.
I have not re-indented most of the code sections that are now wrapped
by PG_TRY(); that's for ease of review. pg_indent will fix it.
This is a pre-existing bug in 8.3, but I don't dare back-patch this change
until it's gotten a reasonable amount of field testing.
xml_parse, all arising from the same sloppy usage of parse_xml_decl.
The original coding had that function returning its output string
parameters in the libxml context, which is long-lived, and all but one
of its callers neglected to free the strings afterwards. The easiest
and most bulletproof fix is to return the strings in the local palloc
context instead, since that's short-lived. This was only costing a
dozen or two bytes per function call, but that adds up fast if the
function is called repeatedly ...
Noted while poking at the more general problem of what to do with our
libxml memory allocation hooks. Back-patch to 8.3, which has the
identical coding.
errors when tables are concurrently dropped. To do this we must take lock
on each relation before we check its privileges. The old code was trying
to do that the other way around, which is a bit pointless when there are lots
of other commands that lock relations before checking privileges. I did keep
it checking each relation's privilege before locking the next relation, which
is a detail that ALTER TABLE isn't too picky about.
ability to lock relations as they scan pg_inherits, and to ignore any
relations that have disappeared by the time we get lock on them. This
makes uses of these functions safe against concurrent DROP operations
on child tables: we will effectively ignore any just-dropped child,
rather than possibly throwing an error as in recent bug report from
Thomas Johansson (and similar past complaints). The behavior should
not change otherwise, since the code was acquiring those same locks
anyway, just a little bit later.
An exception is LockTableCommand(), which is still behaving unsafely;
but that seems to require some more discussion before we change it.
find_inheritance_children() and find_all_inheritors(). I got annoyed that
these are buried inside the planner but mostly used elsewhere. So, create
a new file catalog/pg_inherits.c and put them there, along with a couple
of other functions that search pg_inherits.
The code that modifies pg_inherits is (still) in tablecmds.c --- it's
kind of entangled with unrelated code that modifies pg_depend and other
stuff, so pulling it out seemed like a bigger change than I wanted to make
right now. But this file provides a natural home for it if anyone ever
gets around to that.
This commit just moves code around; it doesn't change anything, except
I succumbed to the temptation to make a couple of trivial optimizations
in typeInheritsFrom().
of AND/OR clause branches that predtest.c would attempt to deal with. As
noted in bug #4721, that change disabled proof attempts for sizes of problems
that people are actually expecting it to work for. The original complaint
it was trying to solve was O(N^2) behavior for long IN-lists, so let's try
applying the limit to just ScalarArrayOpExprs rather than everything.
Another case of "foolish consistency" I fear.
Back-patch to 8.2, same as the previous patch was.
predicate_refuted_by: if either top-level input is a single-element list,
reduce it to its lone member before proceeding. This avoids
a useless level of AND-recursion within the recursive proof routines.
It's worth doing because, for example, if the clause is a 100-element
list and the predicate is a 1-element list then we'd otherwise strip
the predicate's list structure 100 times as we iterate through the clause.
It's only needed at top level because there won't be any trivial ANDs below
that --- this situation is an artifact of the decision to represent even
single-item conditions as Lists in the "implicit AND" format, and that format
is only used at the top level of any predicate or restriction condition.
joins a bit better, ie, understand the differing cost functions for matched
and unmatched outer tuples. There is more that could be done in cost_hashjoin
but this already helps a great deal. Per discussions with Robert Haas.
a toast table to be built, even if the sum-of-column-widths calculation
indicates one isn't needed. This is needed by pg_migrator because if the
old table has a toast table, we have to migrate over the toast table since
it might contain some live data, even though subsequent column drops could
mean that no recently-added rows could require toasting.
restrictions specified for semijoins in optimizer/README, to wit that
you can't reassociate outer joins into or out of the RHS of a semijoin.
Per report from Heikki.
you can end up with an unrecoverable backup if you start a new base backup
right after finishing archive recovery. In that scenario, the redo pointer of
the checkpoint that pg_start_backup() writes points to the XLOG segment where
the timeline-changing end-of-archive-recovery checkpoint is. The beginning
of that segment contains pages with the old timeline ID, and we don't accept
that in recovery unless we find a history file covering the old timeline ID.
If you omit pg_xlog from the base backup and clear the archive directory
before starting the backup, there will be no such history file available.
The bug is present in all versions since PITR was introduced in 8.0, but I'm
back-patching only back to 8.2. Earlier versions didn't have XLOG switch
records, making this fix unfeasible. Given the lack of reports until now,
it doesn't seem worthwhile to spend more effort to fix 8.0 and 8.1.
Per report and suggestion by Mikael Krantz
can be pushed to the top of the join tree, we update both the relids and
qualscope variables to keep them in sync. This prevents a possible later
failure of an Assert clause, and affects nothing else since qualscope isn't
used later except for that Assert. At the moment the Assert shouldn't be
reachable when we've pushed the qual up; but this is cheap insurance, and
it's more sensible anyway in terms of the overall logic of the routine.
Per analysis of a bug report from Stefan Huehner.
I'm not back-patching this since it's just future-proofing; but if anyone
gets tempted to change check_outerjoin_delay again in the back branches,
this might be needed.
must be used for the new database, except when copying from template0.
This is the same rule that we now enforce for locale settings, and it has
the same motivation: databases other than template0 might contain data that
would be invalid according to a different setting. This represents another
step in a continuing process of locking down ways in which encoding violations
could occur inside the backend. Per discussion of a few days ago.
In passing, fix pre-existing breakage of mbregress.sh, and fix up a couple
of ereport() calls in dbcommands.c that failed to specify sqlstate codes.
will still be performed if something in a backend process calls exit()
directly, instead of going through proc_exit() as we prefer. This is a second
response to the issue that we might load third-party code that doesn't know it
should not call exit(). Such a call will now cause a reasonably graceful
backend shutdown, if possible. (Of course, if the reason for the exit() call
is out-of-memory or some such, we might not be able to recover, but at least
we will try.)
a backend has done exit(0) or exit(1) without having disengaged itself
from shared memory. We are at risk for this whenever third-party code is
loaded into a backend, since such code might not know it's supposed to go
through proc_exit() instead. Also, it is reported that under Windows
there are ways to externally kill a process that cause the status code
returned to the postmaster to be indistinguishable from a voluntary exit
(thank you, Microsoft). If this does happen then the system is probably
hosed --- for instance, the dead session might still be holding locks.
So the best recovery method is to treat this like a backend crash.
The dead man switch is armed for a particular child process when it
acquires a regular PGPROC, and disarmed when the PGPROC is released;
these should be the first and last touches of shared memory resources
in a backend, or close enough anyway. This choice means there is no
coverage for auxiliary processes, but I doubt we need that, since they
shouldn't be executing any user-provided code anyway.
This patch also improves the management of the EXEC_BACKEND
ShmemBackendArray array a bit, by reducing search costs.
Although this problem is of long standing, the lack of field complaints
seems to mean it's not critical enough to risk back-patching; at least
not till we get some more testing of this mechanism.
points where we step right or left to the next page. This should ensure
reasonable response time to a query cancel request during an unsuccessful
index scan, as seen in recent gripe from Marc Cousin. It's a bit trickier
than it might seem at first glance, because CHECK_FOR_INTERRUPTS() is a no-op
if executed while holding a buffer lock. So we have to do it just at the
point where we've dropped one page lock and not yet acquired the next.
Remove CHECK_FOR_INTERRUPTS calls at the top level of btgetbitmap and
hashgetbitmap, since they're pointless given the added checks.
I think that GIST is okay already --- at least, there's a CHECK_FOR_INTERRUPTS
at a plausible-looking place in gistnext(). I don't claim to know GIN well
enough to try to poke it for this, if indeed it has a problem at all.
This is a pre-existing issue, but in view of the lack of prior complaints
I'm not going to risk back-patching.
ANALYZE's total sample. The original coding is at risk of overflow for
statistics targets exceeding about 2675; this was not a problem before
8.4 but it is now. Per bug #4793 from Dennis Noordsij.
it fails because the shared memory segment already exists. This
means it can take up to 10 seconds before it reports the error
if it *does* exist, but hopefully it will make the system capable
of restarting even when the server is under high load.
to make sure that the error code is reset, as a precaution in
case the API doesn't properly reset it on success. This could
be necessary, since we check the error value even if the function
doesn't fail for specific success cases.
error message if the installation directory layout is messed up (or at least,
something more useful than the behavior exhibited in bug #4787). During
postmaster startup, check that get_pkglib_path resolves as a readable
directory; and if ParseTzFile() fails to open the expected timezone
abbreviation file, check the possibility that the directory is missing rather
than just the specified file. In case of either failure, issue a hint
suggesting that the installation is broken. These two checks cover the lib/
and share/ trees of a full installation, which should take care of most
scenarios where a sysadmin decides to get cute.
part that rounds up to exactly 1.0 second. The previous coding rejected input
like "00:12:57.9999999999999999999999999999", with the exact number of nines
needed to cause failure varying depending on float-timestamp option and
possibly on platform. Obviously this should round up to the next integral
second, if we don't have enough precision to distinguish the value from that.
Per bug #4789 from Robert Kruus.
In passing, fix a missed check for fractional seconds in one copy of the
"is it greater than 24:00:00" code.
Broken all the way back, so patch all the way back.
PlaceHolderVar nodes in join quals appearing in or below the lowest
outer join that could null the subquery being pulled up. This improves
the planner's ability to recognize constant join quals, and probably
helps with detection of common sort keys (equivalence classes) as well.
aggregate function. By definition, such a sub-SELECT cannot reference any
variables of query levels between itself and the aggregate's semantic level
(else the aggregate would've been assigned to that lower level instead).
So the correct, most efficient implementation is to treat the sub-SELECT as
being a sub-select of that outer query level, not the level the aggregate
syntactically appears in. Not doing so also confuses the heck out of our
parameter-passing logic, as illustrated in bug report from Daniel Grace.
Fortunately, we were already copying the whole Aggref expression up to the
outer query level, so all that's needed is to delay SS_process_sublinks
processing of the sub-SELECT until control returns to the outer level.
This has been broken since we introduced spec-compliant treatment of
outer aggregates in 7.4; so patch all the way back.
any negative or positive number, not just -1 or 1. Fix comment on
varstr_cmp and citext test case accordingly.
As pointed out by Zdenek Kotala, and buildfarm member gothic moth.
documentation warnings against setting it nonzero unless active use of
prepared transactions is intended and a suitable transaction manager has been
installed. This should help to prevent the type of scenario we've seen
several times now where a prepared transaction is forgotten and eventually
causes severe maintenance problems (or even anti-wraparound shutdown).
The only real reason we had the default be nonzero in the first place was to
support regression testing of the feature. To still be able to do that,
tweak pg_regress to force a nonzero value during "make check". Since we
cannot force a nonzero value in "make installcheck", add a variant regression
test "expected" file that shows the results that will be obtained when
max_prepared_transactions is zero.
Also, extend the HINT messages for transaction wraparound warnings to mention
the possibility that old prepared transactions are causing the problem.
All per today's discussion.
using the system functions all the time. (These files are now just copies
of the osf.* files.) The homebrew functions were not getting used anyway
on AIX versions that have dlopen(), that is 4.3 and up, so they are not
needed on any AIX that is even remotely supported by the vendor anymore.
We'd have probably left them here anyway, except some questions were
raised about the copyright.
fact that this is breaking the MSVC build, it's probably not really a good
idea to expand the dependencies of gram.h any further than the core parser;
for instance the value of SCONST might depend on which bison version you'd
built with. Better to expose an additional call point in parser.c, so
move what I had put into pl_funcs.c into parser.c. Also PGDLLIMPORT'ify
the reference to standard_conforming_strings, per buildfarm results.
Stefan Kaltenbrunner. The most reasonable behavior (at least for the near
term) seems to be to ignore the PlaceHolderVar and examine its argument
instead. In support of this, change the API of pull_var_clause() to allow
callers to request recursion into PlaceHolderVars. Currently
estimate_num_groups() is the only customer for that behavior, but where
there's one there may be others.
constants through full joins, as in
select * from tenk1 a full join tenk1 b using (unique1)
where unique1 = 42;
which should generate a fairly cheap plan where we apply the constraint
unique1 = 42 in each relation scan. This had been broken by my patch of
2008-06-27, which is now reverted in favor of a more invasive but hopefully
less incorrect approach. That patch was meant to prevent incorrect extraction
of OR'd indexclauses from OR conditions above an outer join. To do that
correctly we need more information than the outerjoin_delay flag can provide,
so add a nullable_relids field to RestrictInfo that records exactly which
relations are nulled by outer joins that are underneath a particular qual
clause. A side benefit is that we can make the test in create_or_index_quals
more specific: it is now smart enough to extract an OR'd indexclause into the
outer side of an outer join, even though it must not do so in the inner side.
The old coding couldn't distinguish these cases so it could not do either.
select u&42 from table-with-a-u-column;
Also fix missing SET_YYLLOC() in the {dolqfailed} production that I suppose
this was based on. The latter is a pre-existing bug, but the only effect
is to misplace the error cursor by one token, so probably not worth
backpatching.
how this ought to behave for multi-dimensional arrays. Per discussion,
not having it at all seems better than having it with what might prove
to be the wrong behavior. We can always add it later when we have consensus
on the correct behavior.
already did that on Windows, but it's needed on other platforms too when
LC_CTYPE=C. With other locales, we enforce (or trust) that the codeset of
the locale matches the server encoding so we don't need to bind it
explicitly. It should do no harm in that case either, but I don't have
full faith in the PG encoding -> OS codeset mapping table yet. Per recent
discussion on pgsql-hackers.
the checkpoint in immediate or lazy mode. This is to address complaints
that pg_start_backup() takes a long time even when there's no need to minimize
its I/O consumption.
alias for array_length(v,1). The efficiency gain here is doubtless
negligible --- what I'm interested in is making sure that if we have
second thoughts about the definition, we will not have to force a
post-beta initdb to change the implementation.
of discovery, rather than reverse order. This doesn't matter functionally
(I suppose the previous coding dates from the time when lcons was markedly
cheaper than lappend). However now that EXPLAIN is labeling subplans with
IDs that are based on order of creation, this may help produce a slightly
less surprising printout.
are individually labeled, rather than just grouped under an "InitPlan"
or "SubPlan" heading. This in turn makes it possible for decompilation of
a subplan reference to usefully identify which subplan it's referencing.
I also made InitPlans identify which parameter symbol(s) they compute,
so that references to those parameters elsewhere in the plan tree can
be connected to the initplan that will be executed. Per a gripe from
Robert Haas about EXPLAIN output of a WITH query being inadequate,
plus some longstanding pet peeves of my own.
are using our own ports of getopt or getopt_long, those will define
the variable for themselves; and if not, we don't need these, because
we never touch the variable anyway.
of adding optional namespace and action fields to DefElem. Having three
node types that do essentially the same thing bloats the code and leads
to errors of confusion, such as in yesterday's bug report from Khee Chin.
when we are waiting for old snapshots to go away during a concurrent index
build. In particular, this rule lets us avoid waiting for
idle-in-transaction sessions.
This logic could be improved further if we had some way to wake up when
the session we are currently waiting for goes idle-in-transaction. However
that would be a significantly more complex/invasive patch, so it'll have to
wait for some other day.
Simon Riggs, with some improvements by Tom.
interval_eq() considers equal. I'm not sure how that fundamental requirement
escaped us through multiple revisions of this hash function, but there it is;
it's been wrong since interval_hash was first written for PG 7.1.
Per bug #4748 from Roman Kononov.
Backpatch to all supported releases.
This patch changes the contents of hash indexes for interval columns. That's
no particular problem for PG 8.4, since we've broken on-disk compatibility
of hash indexes already; but it will require a migration warning note in
the next minor releases of all existing branches: "if you have any hash
indexes on columns of type interval, REINDEX them after updating".
To implement this without almost duplicating the reloption table, treat
relopt_kind as a bitmask instead of an integer value. This decreases the
range of allowed values, but it's not clear that there's need for that much
values anyway.
This patch also makes heap_reloptions explicitly a no-op for relation kinds
other than heap and TOAST tables.
Patch by ITAGAKI Takahiro with minor edits from me. (In particular I removed
the bit about adding relation kind to an error message, which I intend to
commit separately.)
try to protect an already-existing buffer from being evicted. This was
left as an open issue when the posix_fadvise patch was committed. I'm
not sure there's any evidence to justify more work in this area, but we
should have some record about it in the source code.
for simple Var targetlist entries all the time, even when there are other
entries that are not simple Vars. Also, ensure that we prefetch attributes
(with slot_getsomeattrs) for all Vars in the targetlist, even those buried
within expressions. In combination these changes seem to significantly
reduce the runtime for cases where tlists are mostly but not exclusively
Vars. Per my proposal of yesterday.
conversion functions. This allows transaction rollback to revert to a
previous client_encoding setting without doing fresh catalog lookups.
I believe that this explains and fixes the recent report of "failed to commit
client_encoding" failures.
This bug is present in 8.3.x, but it doesn't seem prudent to back-patch
the fix, at least not till it's had some time for field testing in HEAD.
In passing, remove SetDefaultClientEncoding(), which was used nowhere.
we failed to assign, even in "can't happen" cases. Motivated by wondering
what's going on in a recent trouble report where "failed to commit" did
happen.
temp relations; this is no more expensive than before, now that we have
pg_class.relistemp. Insert tests into bufmgr.c to prevent attempting
to fetch pages from nonlocal temp relations. This provides a low-level
defense against bugs-of-omission allowing temp pages to be loaded into shared
buffers, as in the contrib/pgstattuple problem reported by Stuart Bishop.
While at it, tweak a bunch of places to use new relcache tests (instead of
expensive probes into pg_namespace) to detect local or nonlocal temp tables.
relations (including a temp table's indexes and toast table/index), and
false for normal relations. For ease of checking, this commit just adds
the column and fills it correctly --- revising the relation access machinery
to use it will come separately.
at the same instant as a new backend is spawned. Since CountActiveBackends()
doesn't hold ProcArrayLock, it needs to be prepared for the case that a
pointer at the end of the proc array is still NULL even though numProcs says
it should be valid, since it doesn't hold ProcArrayLock. Backpatch to 8.1.
8.0 and earlier had this right, but it was broken in the split of PGPROC and
sinval shared memory arrays.
Per report and proposal by Marko Kreen.
TupleTableSlots. We have functions for retrieving a minimal tuple from a slot
after storing a regular tuple in it, or vice versa; but these were implemented
by converting the internal storage from one format to the other. The problem
with that is it invalidates any pass-by-reference Datums that were already
fetched from the slot, since they'll be pointing into the just-freed version
of the tuple. The known problem cases involve fetching both a whole-row
variable and a pass-by-reference value from a slot that is fed from a
tuplestore or tuplesort object. The added regression tests illustrate some
simple cases, but there may be other failure scenarios traceable to the same
bug. Note that the added tests probably only fail on unpatched code if it's
built with --enable-cassert; otherwise the bug leads to fetching from freed
memory, which will not have been overwritten without additional conditions.
Fix by allowing a slot to contain both formats simultaneously; which turns out
not to complicate the logic much at all, if anything it seems less contorted
than before.
Back-patch to 8.2, where minimal tuples were introduced.
mode while callers hold pointers to in-memory tuples. I reported this for
the case of nodeWindowAgg's primary scan tuple, but inspection of the code
shows that all of the calls in nodeWindowAgg and nodeCtescan are at risk.
For the moment, fix it with a rather brute-force approach of copying
whenever one of the at-risk callers requests a tuple. Later we might
think of some sort of reference-count approach to reduce tuple copying.
In the backend, I changed only a handful of exemplary or important-looking
instances to make use of the plural support; there is probably more work
there. For the rest of the source, this should cover all relevant cases.
"physical tlist" optimization on the outer relation (ie, force a projection
step to occur in its scan). This avoids storing useless column values when
the outer relation's tuples are written to temporary batch files.
Modified version of a patch by Michael Henderson and Ramon Lawrence.
method to pass extra data to the consistent() and comparePartial() methods.
This is the core infrastructure needed to support the soon-to-appear
contrib/btree_gin module. The APIs are still upward compatible with the
definitions used in 8.3 and before, although *not* with the previous 8.4devel
function definitions.
catversion bump for changes in pg_proc entries (although these are just
cosmetic, since GIN doesn't actually look at the function signature before
calling it...)
Teodor Sigaev and Oleg Bartunov
them from degrading badly when the input is sorted or nearly so. In this
scenario the tree is unbalanced to the point of becoming a mere linked list,
so insertions become O(N^2). The easiest and most safely back-patchable
solution is to stop growing the tree sooner, ie limit the growth of N. We
might later consider a rebalancing tree algorithm, but it's not clear that
the benefit would be worth the cost and complexity. Per report from Sergey
Burladyan and an earlier complaint from Heikki.
Back-patch to 8.2; older versions didn't have GIN indexes.
multiple index entries in a holding area before adding them to the main index
structure. This helps because bulk insert is (usually) significantly faster
than retail insert for GIN.
This patch also removes GIN support for amgettuple-style index scans. The
API defined for amgettuple is difficult to support with fastupdate, and
the previously committed partial-match feature didn't really work with
it either. We might eventually figure a way to put back amgettuple
support, but it won't happen for 8.4.
catversion bumped because of change in GIN's pg_am entry, and because
the format of GIN indexes changed on-disk (there's a metapage now,
and possibly a pending list).
Teodor Sigaev
probes --- the BUFFER_READ_DONE probe provides the same information and more
besides. Expand the LOCK_WAIT_START/DONE probe arguments so that there's
actually some chance of telling what is being waited for. Update and
clean up the documentation.
DTrace probes, so that ordinary reads can be distinguished from relation
extension operations. Move buffer_read_start probe to before the
smgrnblocks() call that's needed in the isExtend case, since really that step
should be charged as part of the time needed for the extension operation.
(This makes it slightly harder to match the read_start with the associated
read_done, since now you can't match them on blockNumber, but it should still
be possible since isExtend operations on the same relation can never be
interleaved.) Per recent discussion.
In passing, add the page identity (forkNum/blockNum) to the parameters of the
buffer_flush_start/buffer_flush_done probes, which were unaccountably lacking
the info.
noise words for the last twelve years, for compatibility with Berkeley-era
output formatting of the special INVALID values for those datatypes.
Considering that the datatypes themselves have been deprecated for awhile,
this is taking backwards compatibility a little far. Per gripe from Josh
Berkus.
distribution, by creating a special fast path for the (first few) most common
values of the outer relation. Tuples having hashvalues matching the MCVs
are effectively forced to be in the first batch, so that we never write
them out to the batch temp files.
Bryce Cutt and Ramon Lawrence, with some editorialization by me.
the cause of the "could not write to log file: Bad file descriptor"
errors reported at
http://archives.postgresql.org//pgsql-general/2008-06/msg00193.php
Backpatch to 8.3, the race condition was introduced by the CSV logging
patch.
Analysis and patch by Gurjeet Singh.
to date, as per bug #4702 and subsequent discussion. In particular, make it
work for years specified using AD/BC or CC fields, and fix the test for "no
year specified" so that it doesn't trigger inappropriately for 1 BC (which it
was doing even in code paths that had nothing to do with to_timestamp). I
also did some minor code beautification in the non-ISO-day-number code path.
This area has been busted all along, but because the code has been rewritten
repeatedly, it would be considerable trouble to back-patch. It's such a
corner case that it doesn't seem worth the effort.
make it include the time for the possible smgropen() call, but that
results in a null pointer dereference :-(.
An alternative solution would be to fetch the buffer tag instead of
looking at *reln, but I'll just put it back as it was for the moment.
BTW, this indicates that DTrace probes evaluate their arguments even
when nominally inactive. What was that about "zero cost", again?
format codes are misapplied to a numeric argument. (The code still produces
a pretty bogus error message in such cases, but I'll settle for stopping the
crash for now.) Per bug #4700 from Sergey Burladyan.
Problem exists in all supported branches, so patch all the way back.
In HEAD, also clean up some ugly coding in the nearby cache management
code.
some bufmgr probes, take out redundant and memory-leak-inducing path arguments
to smgr__md__read__done and smgr__md__write__done, fix bogus attempt to
recalculate space used in sort__done, clean up formatting in places where
I'm not sure pgindent will do a nice job by itself.
are not an alphabetic character although they are not word-breakers too.
So, treat them as part of word.
Per off-list discussion with Dibyendra Hyoju <dibyendra@gmail.com> and
and Bal Krishna Bal <balkrishna7bal@gmail.com> about Nepali language and
Devanagari alphabet.
exact-match pattern (no wildcard) can be index-optimized in some cases where a
prefix-match pattern cannot; specifically, since the required index clause is
simple equality, it works for regular text/varchar indexes even when the
locale is not C. I'm not sure how often this case really comes up, but since
it requires hardly any additional work to handle it, we might as well get it
right. Motivated by a discussion on the JDBC list.
for consistency with the (relatively) recent addition of typmod to SubLink.
An example of why it's a good idea is to be seen in the recent "failed to
locate grouping columns" bug, which wouldn't have happened if a SubPlan
exposed the same typmod info as the SubLink it was derived from.
This could be back-patched, since it doesn't affect any on-disk data format,
but for the moment it doesn't seem necessary to do so.
by the planning process. This prevents the "failed to locate grouping columns"
error recently reported by Dickson Guedes. That happens because planning
replaces SubLinks by SubPlans in the subquery's targetlist, and exprTypmod()
is smarter about the former than the latter, causing the apparent type of
the subquery's output columns to change. This seems to be a deficiency we
should fix in exprTypmod(), but that will be a much more invasive patch
with possible side-effects elsewhere, so I'll do that only in HEAD.
Back-patch to 8.3. Arguably the lack of a copying step is broken/dangerous
all the way back, but in the absence of known problems I'll refrain from
making the older branches pay the extra cost. (The reason this particular
symptom didn't appear before is that exprTypmod() wasn't smart about SubLinks
either, until 8.3.)
kwlist.h, to avoid having to link the backend object file into other programs
like pg_dump. We can now simply symlink a single source file from the backend
(kwlookup.c, containing the shared routine ScanKeywordLookup) and compile it
locally, which is a lot cleaner.
amgettuple or only implement amgetbitmap, instead of the former assumption
that every AM supports both APIs. Extracted with minor editorialization
from Teodor's fast-GIN-insert patch; whatever becomes of that, this seems
like a simple and reasonable generalization of the index AM interface spec.
attribute numbering. Also, a parent whole-row reference should not require
select privilege on child columns that aren't inherited from the parent.
Problem diagnosed by KaiGai Kohei, though this isn't exactly his patch.
fail to provide the function itself. Not sure how we escaped testing anything
later than 7.3 on such cases, but they still exist, as per André Volpato's
report about AIX 5.3.
composite, enum and array types, as those are surely not binary-compatible
with anything else because of the embedded OIDs.
Inspired by bug report by Oleg Serov.
recovery: if background writer or pgstat process dies during recovery (or
any other child process, but those two are the only ones running), send
SIGQUIT to the startup process using correct pid.
encoding conversion of any elog/ereport message being sent to the frontend.
This generalizes a patch that I put in last October, which suppressed
translation of only specific messages known to be associated with recursive
can't-translate-the-message behavior. As shown in bug #4680, we need a more
general answer in order to have some hope of coping with broken encoding
conversion setups. This approach seems a good deal less klugy anyway.
Patch in all supported branches.
- pg_wchar and wchar_t could have different size, so char2wchar
doesn't call pg_mb2wchar_with_len to prevent out-of-bound
memory bug
- make char2wchar/wchar2char symmetric, now they should not be
called with C-locale because mbstowcs/wcstombs oftenly doesn't
work correct with C-locale.
- Text parser uses pg_mb2wchar_with_len directly in case of
C-locale and multibyte encoding
Per bug report by Hiroshi Inoue <inoue@tpf.co.jp> and
following discussion.
Backpatch up to 8.2 when multybyte support was implemented in tsearch.
fail on zero-length inputs. This isn't an issue in normal use because the
conversion infrastructure skips calling the converters for empty strings.
However a problem was created by yesterday's patch to check whether the
right conversion function is supplied in CREATE CONVERSION. The most
future-proof fix seems to be to make the converters safe for this corner case.
input lists before we grovel through the lists. This doesn't save much,
but testing shows that the case of both inputs NIL is common enough that
it saves something. And this is used enough to be a hotspot.
to 100ms (from 1000). This still seems to be comfortably larger than the
useful range of the parameter, and it should help discourage people from
picking uselessly large values. Tweak the documentation to recommend small
values, too. Per discussion of a couple weeks ago.
the ON clause of an outer join. Doing so is semantically correct but results
in de-optimizing queries that were structured to take advantage of the sublink
style of execution, as seen in recent complaint from Kevin Grittner. Since
the user can get the other behavior by reorganizing his query, having the
flattening happen automatically is just a convenience, and that doesn't
justify breaking existing applications. Eventually it would be nice to
re-enable this, but that seems to require a significantly different approach
to outer joins in the executor.
function for the specified source and destination encodings. We do that by
calling the function with an empty string. If it can't perform the requested
conversion, it will throw an error.
Backport to 7.4 - 8.3. Per bug report #4680 by Denis Afonin.
to be syntactically part of a semijoin clause. For example given
WHERE EXISTS(SELECT ... WHERE upper.var = lower.var AND some-condition)
where some-condition is just a restriction on the lower relation, we can
use unique-ification on lower.var after having applied some-condition within
the scan on lower.
looks for a CaseTestExpr to figure out what the parser did, but it failed to
consider the possibility that an implicit coercion might be inserted above
the CaseTestExpr. This could result in an Assert failure in some cases
(but correct results if Asserts weren't enabled), or an "unexpected CASE WHEN
clause" error in other cases. Per report from Alan Li.
Back-patch to 8.1; problem doesn't exist before that because CASE was
implemented differently.
making pull_up_sublinks() construct a full-blown JoinExpr tree representation
of IN/EXISTS SubLinks that it is able to convert to semi or anti joins.
This makes pull_up_sublinks() a shade more complex, but the gain in semantic
clarity is worth it. I still have more to do in this area to address the
previously-discussed problems, but this commit in itself fixes at least one
bug in HEAD, as shown by added regression test case.
wrappers (similar to procedural languages). This way we don't need to retain
the nearly empty libraries, and we are more free in how to implement the
wrapper API in the future.
TABLE: if the command is executed by someone other than the table owner (eg,
a superuser) and the table has a toast table, the toast table's pg_type row
ends up with the wrong typowner, ie, the command issuer not the table owner.
This is quite harmless for most purposes, since no interesting permissions
checks consult the pg_type row. However, it could lead to unexpected failures
if one later tries to drop the role that issued the command (in 8.1 or 8.2),
or strange warnings from pg_dump afterwards (in 8.3 and up, which will allow
the DROP ROLE because we don't create a "redundant" owner dependency for table
rowtypes). Problem identified by Cott Lang.
Back-patch to 8.1. The problem is actually far older --- the CLUSTER variant
can be demonstrated in 7.0 --- but it's mostly cosmetic before 8.1 because we
didn't track ownership dependencies before 8.1. Also, fixing it before 8.1
would require changing the call signature of heap_create_with_catalog(), which
seems to carry a nontrivial risk of breaking add-on modules.
IS NULL condition is rendered redundant by detection of an antijoin.
If we know that a join is an antijoin, then *any* Var coming out of its
righthand side must be NULL, not only the joining column(s). Also,
it's still gonna be null after being passed up through higher joins,
whether they're outer joins or not. I was misled by a faulty analogy
to reduce_outer_joins() in the original coding. But consider
select * from a left join b on a.x = b.y where b.y is null and b.z is null;
The first IS NULL condition justifies deciding that the join is an antijoin
(if the = is strict) and then the second one is just plain redundant.
unary minus operators. We weren't attempting to prevent minus zero anywhere
else; in view of our gradual trend to make the float datatypes more IEEE
standard compliant, we should allow minus zero here rather than disallow it
elsewhere.
We don't, however, expect that all platforms will produce minus zero, so
we need to adjust the one affected regression test to allow both results.
Per discussion of bug #4660.
(In passing, clean up a couple other minor infelicities in float.c.)
its usual buffer cleaning duties during archive recovery, and it's responsible
for performing restartpoints.
This requires some changes in postmaster. When the startup process has done
all the initialization and is ready to start WAL redo, it signals the
postmaster to launch the background writer. The postmaster is signaled again
when the point in recovery is reached where we know that the database is in
consistent state. Postmaster isn't interested in that at the moment, but
that's the point where we could let other backends in to perform read-only
queries. The postmaster is signaled third time when the recovery has ended,
so that postmaster knows that it's safe to start accepting connections.
The startup process now traps SIGTERM, and performs a "clean" shutdown. If
you do a fast shutdown during recovery, a shutdown restartpoint is performed,
like a shutdown checkpoint, and postmaster kills the processes cleanly. You
still have to continue the recovery at next startup, though.
Currently, the background writer is only launched during archive recovery.
We could launch it during crash recovery as well, but it seems better to keep
that codepath as simple as possible, for the sake of robustness. And it
couldn't do any restartpoints during crash recovery anyway, so it wouldn't be
that useful.
log_restartpoints is gone. Use log_checkpoints instead. This is yet to be
documented.
This whole operation is a pre-requisite for Hot Standby, but has some value of
its own whether the hot standby patch makes 8.4 or not.
Simon Riggs, with lots of modifications by me.
unique for a particular query, if the index predicate is satisfied. This
requires a bit of reordering of operations so that we check the predicates
before doing any selectivity estimates, but shouldn't really cause any
noticeable slowdown. Per a comment from Michal Politowski.
replace the old recursive-SQL-function implementation of _pg_keysequal()
with use of the built-in array containment operators, and change
table_constraints' UNION to UNION ALL. Per discussion with Octavio Alvarez.
initdb not forced since this doesn't affect results, but you'd need to
initdb or reload the information_schema to see the new definitions.
any LISTEN command. This is more important than it used to be because
DISCARD ALL invokes UNLISTEN. Connection-pooled applications making heavy
use of DISCARD ALL were seeing significant contention for pg_listener,
as reported by Matteo Beccati. It seems unlikely that clients using LISTEN
would use pooled connections, so this simple tweak seems sufficient,
especially since the pg_listener implementation is slated to go away soon
anyway.
Back-patch to 8.3, where DISCARD ALL was introduced.
get rid of the OID column. This eliminates the problem discovered by Heikki
back in November that 8.4's suppression of "unnecessary" junk filtering in
INSERT/SELECT could lead to an Assert failure, or storing of oids into a table
that shouldn't have them if Asserts are off. While that particular problem
could have been solved in other ways, it seems likely to be just a forerunner
of things to come if we continue to allow tables to contain rows that disagree
with the pg_class.relhasoids setting. It's better to make this operation slow
than to sacrifice performance or risk bugs in more common code paths.
Also, add ALTER TABLE SET WITH OIDS to rewrite the table to add oids.
This was a bit more controversial, but in view of the very small amount of
extra code needed given the current ALTER TABLE infrastructure, it seems best
to eliminate the asymmetry in features.
per-table overrides of parameters.
This removes a whole class of problems related to misusing the catalog,
and perhaps more importantly, gives us pg_dump support for the parameters.
Based on a patch by Euler Taveira de Oliveira, heavily reworked by me.
from the source table. This could never happen anyway before 8.4 because
the executor invariably applied a "junk filter" to rows due to be inserted;
but now that we skip doing that when it's not necessary, the case can occur.
Problem noted 2008-11-27 by KaiGai Kohei, though I misunderstood what he
was on about at the time (the opacity of the patch he proposed didn't help).
keys when considering a semi or anti join. This requires estimating the
selectivity of the merge qual as though it were a regular inner join condition.
To allow caching both that and the real outer-join-aware selectivity, split
RestrictInfo.this_selec into two fields.
This fixes one of the problems reported by Kevin Grittner.
has_column_privilege and has_any_column_privilege SQL functions; fix the
information_schema views that are supposed to pay attention to column
privileges; adjust pg_stats to show stats for any column you have select
privilege on; and fix COPY to allow copying a subset of columns if the user
has suitable per-column privileges for all the columns.
To improve efficiency of some of the information_schema views, extend the
has_xxx_privilege functions to allow inquiring about the OR of a set of
privileges in just one call. This is just exposing capability that already
existed in the underlying aclcheck routines.
In passing, make the information_schema views report the owner's own
privileges as being grantable, since Postgres assumes this even when the grant
option bit is not set in the ACL. This is a longstanding oversight.
Also, make the new has_xxx_privilege functions for foreign data objects follow
the same coding conventions used by the older ones.
Stephen Frost and Tom Lane
the cheapest-total inner path as a new candidate while truncating the
sort key list, if it already matched the full sort key list. This is
too much of a corner case to be worth back-patching, since it's unusual
for the cheapest total path to be sorted, and anyway no real harm is
done (except in JOIN_SEMI/ANTI cases where cost_mergejoin is a bit
broken at the moment). But it wasn't behaving as intended, so fix it.
Noted while examining a test case from Kevin Grittner. This error doesn't
explain his issue, but it does explain why "set enable_seqscan = off"
seemed to reproduce it for me.
qualifier, and add support for this in pg_dump.
This allows TOAST tables to have user-defined fillfactor, and will also
enable us to move the autovacuum parameters to reloptions without taking
away the possibility of setting values for TOAST tables.
It's missing in older versions too, but it doesn't seem worth
back-porting. All negative are just harmlessly treated as "no limit", and
tightening the check might even brake an application that relies on it.
encoding conversion functions. These are not can't-happen cases because
it's possible to create a conversion with the wrong conversion function
for the specified encoding pair. That would lead to an Assert crash in
an Assert-enabled build, or incorrect conversion otherwise, neither of
which is desirable. This would be a DOS issue if production databases
were customarily built with asserts enabled, but fortunately that's not so.
Per an observation by Heikki.
Back-patch to all supported branches.
to the documented API value. The previous code got it right as
it's implemented, but accepted too much/too little compared to
the API documentation.
Per comment from Zdenek Kotala.
refactor the relcache code that used to do that. This allows other callers
(particularly autovacuum) to do the same without necessarily having to open
and lock a table.
pages were marked as clean as well. The idea is to avoid defeating OS
readahead by skipping a page here and there, and also makes it less likely
that we miss an opportunity to advance relfrozenxid, for the sake of only
a few skipped pages.
case that the command is rewritten into another type of command. The old
behavior to return the command tag of the last executed command was
pretty surprising. In PL/pgSQL, for example, it meant that if a command
was rewritten to a utility statement, FOUND wasn't set at all.
Also, if linked against other versions than the default MSVCRT library
(for example the MSVC build which links against MSVCRT80), also update
the cache in the default MSVCRT at the same time.
This should fix the issues with setting LC_MESSAGES on the MSVC build.
Original patch from Hiroshi Inoue and Hiroshi Saito, much rewritten
by me.
be used instead of the normal exclusive lock, and make WAL redo functions
responsible for calling RestoreBkpBlocks(). They know better what kind of a
lock they need.
At the moment, this just moves things around with no functional change, but
makes the hot standby patch that's under review cleaner.
CREATE/ALTER/DROP USER MAPPING are now allowed either by the server owner or
by a user with USAGE privileges for his own user name. This is more or less
what the SQL standard wants anyway (plus "implementation-defined")
Hide information_schema.user_mapping_options.option_value, unless the current
user is the one associated with the user mapping, or is the server owner and
the mapping is for PUBLIC, or is a superuser. This is to protect passwords.
Also, fix a bug in information_schema._pg_foreign_servers, which hid servers
using wrappers where the current user did not have privileges on the wrapper.
The correct behavior is to hide servers where the current user has no
privileges on the server.
fillRelOptions routine that stores the parsed values in the struct using a
table-based approach. Per Tom suggestion. Also remove the "continue"
in HANDLE_*_RELOPTION macros, which were useless and in spirit they were
assuming too much of how the macros were going to be used. (Note that these
macros are now unused, but the intention is to introduce some usage in a
future autovacuum patch, which is why they weren't completely removed.)
Also, do not call the string validation routine when not validating. It seems
less error-prone this way, per commentary on the amoptions SGML docs.
the same page we are nanoseconds away from reading for real. There should be
something left to do on the current page before we consider issuing a prefetch.
business with inheritance recursion: ALTER INDEX, ALTER SEQUENCE, ALTER
TRIGGER, ALTER VIEW. They would just silently ignore the ONLY.
ALTER TABLE has mixed behavior and cannot be dealt with this way because
of the resulting shift/reduce conflicts.
GUC variable effective_io_concurrency controls how many concurrent block
prefetch requests will be issued.
(The best way to handle this for plain index scans is still under debate,
so that part is not applied yet --- tgl)
Greg Stark
we can get some buildfarm feedback about whether that function is still
problematic. (Note that the planned async-preread patch will not really
prove anything one way or the other in buildfarm testing, since it will
be inactive with default GUC settings.)
bitmap. This is extracted from Greg Stark's posix_fadvise patch; it seems
worth committing separately, since it's potentially useful independently of
posix_fadvise.
that are set up for execution with ExecPrepareExpr rather than going through
the full planner process. By introducing an explicit notion of "expression
planning", this patch also lays a bit of groundwork for maybe someday
allowing sub-selects in standalone expressions.
the default. This setting enables constraint exclusion checks only for
appendrel members (ie, inheritance children and UNION ALL arms), which are
the cases in which constraint exclusion is most likely to be useful. Avoiding
the overhead for simple queries that are unlikely to benefit should bring
the cost down to the point where this is a reasonable default setting.
Per today's discussion.
OutputFunctionCall, and friends. This allows SPI-using functions to invoke
datatype I/O without concern for the possibility that a SPI-using function
will be called (which could be either the I/O function itself, or a function
used in a domain check constraint). It's a tad ugly, but not nearly as ugly
as what'd be needed to make this work via retail insertion of push/pop
operations in all the PLs.
This reverts my patch of 2007-01-30 that inserted some retail SPI_push/pop
calls into plpgsql; that approach only fixed plpgsql, and not any other PLs.
But the other PLs have the issue too, as illustrated by a recent gripe from
Christian Schröder.
Back-patch to 8.2, which is as far back as this solution will work. It's
also as far back as we need to worry about the domain-constraint case, since
earlier versions did not attempt to check domain constraints within datatype
input. I'm not aware of any old I/O functions that use SPI themselves, so
this should be sufficient for a back-patch.
not include postgres.h nor anything else it doesn't directly need. Add
#includes to calling files as needed to compensate. Per my proposal of
yesterday.
This should be noted as a source code change in the 8.4 release notes,
since it's likely to require changes in add-on modules.
to pass the full username@realm string to the authentication instead of
just the username. This makes it possible to use pg_ident.conf to authenticate
users from multiple realms as different database users.
consistent. Currently, in csvlog, vxid of an auxiliary process isn't
displayed. On the other hand, in stderr/syslog, invalid vxid (-1/0) of
that is displayed.
Fujii Masao
particular this allows EmitWarningsOnPlaceholders messages to show up in the
postmaster log by default. Update elog.h comment to make it clearer what INFO
is for, and fix one example in the SGML docs that was misusing it. Per my
gripe of yesterday.
If the table was smaller than REL_TRUNCATE_FRACTION (= 16) pages, we always
tried to acquire AccessExclusiveLock on it even if there was no empty pages
at the end.
Report by Simon Riggs. Back-patch all the way to 7.4.
default expressions to a function call, eval_const_expressions must recurse on
those expressions. Else they don't get simplified, and in particular we fail
to insert additional default arguments if any functions needing defaults are
in there. Per report from Rushabh Lathia.
a more complete framework for writing custom option processing routines
by user-defined access methods.
Catalog version bumped due to the general API changes, which are going to
affect user-defined "amoptions" routines.
except the caller can specify the encoding to work in; this will be needed
for pg_stat_statements. In passing, do some marginal efficiency hacking
and clean up some comments. Also, prevent the single-byte-encoding code
path from fetching one byte past the stated length of the string (this
last is a bug that might need to be back-patched at some point).
when loaded via shared_preload_libraries. Needed for support of
pg_stat_statements, or pretty much anything else that wants a GUC to
control size of a shared memory allocation.
initialization, to give loadable modules a reasonable place to perform
creation of any shared memory areas they need. This is the logical conclusion
of our previous creation of RequestAddinShmemSpace() and RequestAddinLWLocks().
We don't need an explicit shmem_shutdown_hook, because the existing
on_shmem_exit and on_proc_exit mechanisms serve that need.
Also, adjust SubPostmasterMain so that libraries that got loaded into the
postmaster will be loaded into all child processes, not only regular backends.
This improves consistency with the non-EXEC_BACKEND behavior, and might be
necessary for functionality for some types of add-ons.
practically free given prior 8.4 changes in plancache and portal management,
and it makes it a lot easier for ExecutorStart/Run/End hooks to get at the
query text. Extracted from Itagaki Takahiro's pg_stat_statements patch,
with minor editorialization.
and change auto_explain's custom GUC variables to be named auto_explain.xxx
not just explain.xxx. Per discussion in connection with the
pg_stat_statements patch, it seems like a good idea to have the convention
that custom variable classes are named the same as their defining module.
Committing separately since this should happen regardless of what happens
with pg_stat_statements itself.
is available during datatype input in Bind message processing. I put the
PopActiveSnapshot() or equivalent just before PortalDefineQuery, which is
an unsafe spot for it (in 8.3 and later) because we are carrying a plancache
refcount that hasn't yet been assigned to the portal. Any error thrown there
would result in leaking the refcount. It's not exactly likely that
PopActiveSnapshot would throw an elog, perhaps, but it could happen.
Reorder the code and add another comment warning not to do that.
so that user-defined window functions are possible. For the moment you'll
have to write them in C, for lack of any interface to the WindowObject API
in the available PLs, but it's better than no support at all.
There was some debate about the best syntax for this. I ended up choosing
the "it's an attribute" position --- the other approach will inevitably be
more work, and the likely market for user-defined window functions is
probably too small to justify it.
patch. This includes the ability to force the frame to cover the whole
partition, and the ability to make the frame end exactly on the current row
rather than its last ORDER BY peer. Supporting any more of the full SQL
frame-clause syntax will require nontrivial hacking on the window aggregate
code, so it'll have to wait for 8.5 or beyond.
field needs to be included in equalRuleLocks() comparisons, else updates
will fail to propagate into relcache entries when they have positive
reference count (ie someone is using the relcache entry).
Per report from Alex Hunsaker.
upcoming window-functions patch. First, tuplestore_trim is now an
exported function that must be explicitly invoked by callers at
appropriate times, rather than something that tuplestore tries to do
behind the scenes. Second, a read pointer that is marked as allowing
backward scan no longer prevents truncation. This means that a read pointer
marked as having BACKWARD but not REWIND capability can only safely read
backwards as far as the oldest other read pointer. (The expected use pattern
for this involves having another read pointer that serves as the truncation
fencepost.)
This doesn't do any remote or external things yet, but it gives modules
like plproxy and dblink a standardized and future-proof system for
managing their connection information.
Martin Pihlak and Peter Eisentraut
explicit cast to show the intended array type, we forgot to teach ruleutils.c
to print out such constructs properly. Found by noting bogus output from
recent changes in polymorphism regression test.
materialize-mode set results. Since it now uses the ReturnSetInfo node
to hold internal state, we need to be sure to set up the node even when
the immediately called function doesn't return set (but does have a set-valued
argument). Per report from Anupama Aherrao.
skipped. We could update relpages anyway, but it seems better to only
update it together with reltuples, because we use the reltuples/relpages
ratio in the planner. Also don't update n_live_tuples in pgstat.
ANALYZE in VACUUM ANALYZE now needs to update pg_class, if the
VACUUM-phase didn't do so. Added some boolean-passing to let analyze_rel
know if it should update pg_class or not.
I also moved the relcache invalidation (to update rd_targblock) from
vac_update_relstats to where RelationTruncate is called, because
vac_update_relstats is not called for partial vacuums anymore. It's more
obvious to send the invalidation close to the truncation that requires it.
Per report by Ned T. Crigler.
includes a few new ones.
- Fixed compilation errors on OS X for probes that use typedefs
- Fixed a number of probes to pass ForkNumber per the relation forks
patch
- The new probes are those that were taken out from the previous
submitted patch and required simple fixes. Will submit the other probes
that may require more discussion in a separate patch.
Robert Lor
the other major heapam.c functions. The only known consequence of this
omission is that UPDATE RETURNING failed to return the correct value for
"tableoid", as per report from KaiGai Kohei.
Back-patch to 8.2. Arguably it's wrong all the way back; but without
evidence of visible breakage before RETURNING was added, I'll desist from
patching the older branches.
to return NULL, instead of erroring out, if the target object is specified by
OID and we can't find that OID in the catalogs. Since these functions operate
internally on SnapshotNow rules, there is a race condition when using them
in user queries: the query's MVCC snapshot might "see" a catalog row that's
already committed dead, leading to a failure when the inquiry function is
applied. Returning NULL should generally provide more convenient behavior.
This issue has been complained of before, and in particular we are now seeing
it in the regression tests due to another recent patch.
to 10, to compensate for the recent change in default statistics target.
The original number was pulled out of the air anyway :-(, but it was picked
in the context of the old default, so holding the default size of the
MCELEM array constant seems the best thing. Per discussion.
pg_database_encoding_max_length() predicts the maximum character length
returned by wchar2char(). Per Hiroshi Inoue, MB_CUR_MAX isn't usable on
Windows because we allow encoding = UTF8 when the locale says differently;
and getting rid of it seems a good idea on general principles because it
narrows our dependence on libc's locale API just a little bit more.
Also install a check for overflow of the buffer size computation.
actual argument type of ANYARRAY to match an argument declared ANYARRAY,
so long as ANYELEMENT etc aren't used. I had overlooked the fact that this
is a possible case while fixing bug #3852; but it is possible because
pg_statistic contains columns declared ANYARRAY. Per gripe from Corey Horton.
when they are invoked by the parser. We had been setting up a snapshot at
plan time but really it needs to be done earlier, before parse analysis.
Per report from Dmitry Koterov.
Also fix two related problems discovered while poking at this one:
exec_bind_message called datatype input functions without establishing a
snapshot, and SET CONSTRAINTS IMMEDIATE could call trigger functions without
establishing a snapshot.
Backpatch to 8.2. The underlying problem goes much further back, but it is
masked in 8.1 and before because we didn't attempt to invoke domain check
constraints within datatype input. It would only be exposed if a C-language
datatype input function used the snapshot; which evidently none do, or we'd
have heard complaints sooner. Since this code has changed a lot over time,
a back-patch is hardly risk-free, and so I'm disinclined to patch further
than absolutely necessary.
vacuuming (it's not), say "database-wide VACUUM" instead of "full-database
VACUUM" in the relevant hint messages. Also, document the permissions needed
to do this. Per today's discussion.
right child if it doesn't need to. This saves some miniscule number
of cycles, but the ulterior motive is to avoid an optimization bug
known to exist in SCO's C compiler (and perhaps others?)
replication patch needs a signal, but we've already used SIGUSR1 and
SIGUSR2 in normal backends. This patch allows reusing SIGUSR1 for that,
and for other purposes too if the need arises.
where no function stats entries exist. Partial response to Pavel's
observation that small VACUUM operations are noticeably slower in CVS HEAD
than 8.3.
form a join and that case doesn't have anything to join to. (We could
probably make it work if we didn't pull up the subquery, but it seems to
me that the case isn't worth extra code.) Per report from Greg Stark.
appendix on key words. catdesc was originally intended as computer-readable,
but since we ended up adding catcode, we can have more elaborate descriptions.
non-writable large objects need to have their snapshots registered on the
transaction resowner, not the current portal's, because it must persist until
the large object is closed (which the portal does not). Also, ensure that the
serializable snapshot is recorded by the transaction resource owner too, even
when a subtransaction has changed the current resource owner before
serializable is taken.
Per bug reports from Pavan Deolasee.
the visibility map patch that because autovacuum always sets
VacuumStmt->freeze_min_age, visibility map was never used for autovacuum,
only for manually launched vacuums. This patch introduces a new scan_all
field to VacuumStmt, indicating explicitly whether the visibility map
should be used, or the whole relation should be scanned, to advance
relfrozenxid. Anti-wraparound vacuums still need to scan all pages.
it's connection. This is required for applications that unload
the libpq library (such as PHP) in which case we'd otherwise
have pointers to these functions when they no longer exist.
This needs a bit more testing before we can consider a backpatch,
so not doing that yet.
In passing, remove unused functions in backend/libpq.
Bruce Momjian and Magnus Hagander, per report and analysis
by Russell Smith.
heap page, where a set bit indicates that all tuples on the page are
visible to all transactions, and the page therefore doesn't need
vacuuming. It is stored in a new relation fork.
Lazy vacuum uses the visibility map to skip pages that don't need
vacuuming. Vacuum is also responsible for setting the bits in the map.
In the future, this can hopefully be used to implement index-only-scans,
but we can't currently guarantee that the visibility map is always 100%
up-to-date.
In addition to the visibility map, there's a new PD_ALL_VISIBLE flag on
each heap page, also indicating that all tuples on the page are visible to
all transactions. It's important that this flag is kept up-to-date. It
is also used to skip visibility tests in sequential scans, which gives a
small performance gain on seqscans.
outer join clauses. Given, say,
... from a left join b on a.a1 = b.b1 where a.a1 = 42;
we'll deduce a clause b.b1 = 42 and then mark the original join clause
redundant (we can't remove it completely for reasons I don't feel like
squeezing into this log entry). However the original implementation of
that wasn't bulletproof, because clause_selectivity() wouldn't honor
this_selec if given nonzero varRelid --- which in practice meant that
it worked as desired *except* when considering index scan quals. Which
resulted in bogus underestimation of the size of the indexscan result for
an inner indexscan in an outer join, and consequently a possibly bad
choice of indexscan vs. bitmap scan. Fix by introducing an explicit test
into clause_selectivity(). Also, to make sure we don't trigger that test
in corner cases, change the convention to be that this_selec > 1, not
this_selec = 1, means it's been marked redundant. Per trouble report from
Scara Maccai.
Back-patch to 8.2, where the problem was introduced.
is treated like a non-digit separator. This fixes the inconsistency in
examples like:
to_timestamp('2008-01-2', 'YYYY-MM-DD') -- didn't work
and
to_timestamp('2008-1-02', 'YYYY-MM-DD') -- did work
toasted values, since those could get dropped once the cursor's transaction
is over. Per bug #4553 from Andrew Gierth.
Back-patch as far as 8.1. The bug actually exists back to 7.4 when holdable
cursors were introduced, but this patch won't work before 8.1 without
significant adjustments. Given the lack of field complaints, it doesn't seem
worth the work (and risk of introducing new bugs) to try to make a patch for
the older branches.
that a Portal is a useful and sufficient additional argument for
CreateDestReceiver --- it just isn't, in most cases. Instead formalize
the approach of passing any needed parameters to the receiver separately.
One unexpected benefit of this change is that we can declare typedef Portal
in a less surprising location.
This patch is just code rearrangement and doesn't change any functionality.
I'll tackle the HOLD-cursor-vs-toast problem in a follow-on patch.
the basic representational details (typlen, typalign, typbyval, typstorage)
to be copied from an existing type rather than listed explicitly in the
CREATE TYPE command. The immediate reason for this is to provide a simple
solution for add-on modules that want to define types represented as int8,
float4, or float8: as of 8.4 the appropriate PASSEDBYVALUE setting is
platform-specific and so it's hard for a SQL script to know what to do.
This patch fixes the contrib/isn breakage reported by Rushabh Lathia.
This was a thinko introduced in a patch from last February; it results
in memory leakage if an SRF is shut down before the actual end of query,
because subsequent code will be running in a longer-lived context than
it's expecting to be.
RHS that can't be unique-ified --- join_is_legal has to check that before
deciding to build a join, else we'll have an unimplementable joinrel.
Per report from Greg Stark.
DestReceiver created during postquel_start needs to be destroyed during
postquel_end. In a moment of brain fade I had assumed this would be taken
care of by FreeQueryDesc, but it's not (and shouldn't be).
by hand. As an added bonus, the new code is smaller and more understandable,
and the ugly loops are gone.
This had been discussed all along but never implemented. It became clear that
it really needed to be fixed after a bug report by Pavan Deolasee.
the bgwriter immediately. This covers the case where the bgwriter is still
starting up, as seen in a recent buildfarm failure. In future it might also
assist with clean recovery after a bgwriter termination and restart ---
right now the postmaster treats early bgwriter exit as a system crash,
but that might not always be so.
though it is an inner rather than outer join type. This essentially means
that we don't bother to separate "pushed down" qual conditions from actual
join quals at a semijoin plan node; which is okay because the restrictions of
SQL syntax make it impossible to have a pushed-down qual that references the
inner side of a semijoin. This allows noticeably better optimization of
IN/EXISTS cases than we had before, since the equivalence-class machinery can
now use those quals. Also fix a couple of other mistakes that had essentially
disabled the ability to unique-ify the inner relation and then join it to just
a subset of the left-hand relations. An example case using the regression
database is
select * from tenk1 a, tenk1 b
where (a.unique1,b.unique2) in (select unique1,unique2 from tenk1 c);
which is planned reasonably well by 8.3 and earlier but had been forcing a
cartesian join of a/b in CVS HEAD.
as LIKE. I oversimplified this code when removing support for plan-time
determination of index operator lossiness back in April --- I had thought
create_bitmap_subplan could stop returning two separate lists of qual
conditions, but it still must so that we can treat special operators
correctly in create_bitmap_scan_plan. Per report from Rushabh Lathia.
truncations in FSM code, call FreeSpaceMapTruncateRel from smgr_redo. To
make that cleaner from modularity point of view, move the WAL-logging one
level up to RelationTruncate, and move RelationTruncate and all the
related WAL-logging to new src/backend/catalog/storage.c file. Introduce
new RelationCreateStorage and RelationDropStorage functions that are used
instead of calling smgrcreate/smgrscheduleunlink directly. Move the
pending rel deletion stuff from smgrcreate/smgrscheduleunlink to the new
functions. This leaves smgr.c as a thin wrapper around md.c; all the
transactional stuff is now in storage.c.
This will make it easier to add new forks with similar truncation logic,
like the visibility map.
* Refactor explain.c slightly to export a convenient-to-use subroutine
for printing EXPLAIN results.
* Provide hooks for plugins to get control at ExecutorStart and ExecutorEnd
as well as ExecutorRun.
* Add some minimal support for tracking the total runtime of ExecutorRun.
This code won't actually do anything unless a plugin prods it to.
* Change the API of the DefineCustomXXXVariable functions to allow nonzero
"flags" to be specified for a custom GUC variable. While at it, also make
the "bootstrap" default value for custom GUCs be explicitly specified as a
parameter to these functions. This is to eliminate confusion over where the
default comes from, as has been expressed in the past by some users of the
custom-variable facility.
* Refactor GUC code a bit to ensure that a custom variable gets initialized to
something valid (like its default value) even if the placeholder value was
invalid.
locate the target row, if the cursor was declared with FOR UPDATE or FOR
SHARE. This approach is more flexible and reliable than digging through the
plan tree; for instance it can cope with join cursors. But we still provide
the old code for use with non-FOR-UPDATE cursors. Per gripe from Robert Haas.
return the tableoid as well as the ctid for any FOR UPDATE targets that
have child tables. All child tables are listed in the ExecRowMark list,
but the executor just skips the ones that didn't produce the current row.
Curiously, this longstanding restriction doesn't seem to have been documented
anywhere; so no doc changes.
if the user is superuser. This makes available to extension modules the same
sort of trick being practiced by array_agg(). The reason for the superuser
restriction is that you could crash the system by connecting up an
incompatible pair of internal-using functions as an aggregate. It shouldn't
interfere with any legitimate use, since you'd have to be superuser to create
the internal-using transition and final functions anyway.
returns VOID. This is the last of the easy fixes I recommended in
11870.1218838360@sss.pgh.pa.us --- the others got done awhile ago but
I forgot about this one.
heap_form_tuple. Since this removes the last remaining caller of
heap_addheader, remove it.
Extracted from the column privileges patch from Stephen Frost, with further
code cleanups by me.
anyelement. This lacks the WITH ORDINALITY option, as well as the multiple
input arrays option added in the most recent SQL specs. But it's still a
pretty useful subset of the spec's functionality, and it is enough to
allow obsoleting contrib/intagg.
for inserting tuples in increasing TID order. It's not clear whether this
fully explains Ivan Sergio Borgonovo's complaint, but simple testing
confirms that a scan that doesn't start at block 0 can slow GIN build by
a factor of three or four.
Backpatch to 8.3. Sync scan didn't exist before that.
- FloatOnly: only used by NumericOnly, instead put the FloatOnly production into NumericOnly
- IntegerOnly: only used by NumericOnly and one ALTER TABLE rule, replacement SignedIconst is already used in several other places
operator. The result depends only on the two input operators and the proof
direction (imply or refute), so it's easy to cache. This provides a very
large savings in cases such as Sergey Konoplev's long NOT-IN-list example,
where predtest spends all its time repeatedly figuring out that the same pair
of operators cannot be used to prove anything. (But of course the O(N^2)
behavior still catches up with you eventually.) I'm not convinced it buys
a whole lot when constraint_exclusion isn't turned on, but it's not a lot
of added code so we might as well cache all the time.
AND, OR, or equivalent clauses: if there are too many (more than 100) just
exit without proving anything. This ensures that we don't spend O(N^2) time
trying (and most likely failing) to prove anything about very long IN lists
and similar cases.
Also, install a couple of CHECK_FOR_INTERRUPTS calls to ensure that a long
proof attempt can be interrupted.
Per gripe from Sergey Konoplev.
Back-patch the whole patch to 8.2 and just the CHECK_FOR_INTERRUPTS addition
to 8.1. (The rest of the patch doesn't apply cleanly, and since 8.1 doesn't
show the complained-of behavior anyway, it doesn't seem necessary to work
hard on it.)
function as a special case.
This version still has the suspicious behavior of returning null for an
empty array (rather than zero), but this may need a wholesale revision of
empty array behavior, currently under discussion.
Jim Nasby, Robert Haas, Peter Eisentraut
in "postgres_verbose" intervalstyle, and the equally arbitrary decision to
show at least two fractional-seconds digits in most other datetime display
styles. This results in some minor changes in the expected regression test
outputs.
Also, coalesce a lot of repetitive code in datetime.c into subroutines,
for clarity and ease of maintenance. In particular this roughly halves
the number of #ifdef HAVE_INT64_TIMESTAMP segments.
Ron Mayer, with some additional kibitzing from Tom Lane
translated_vars list get updated when pulling up an appendrel member. It's
not clear that this really matters at present, since relatively little gets
done with the outputs of an appendrel child relation; but it probably will
come back to bite us sometime if we leave them with the wrong values.
we extended the appendrel mechanism to support UNION ALL optimization. The
reason nobody noticed was that we are not actually using attr_needed data for
appendrel children; hence it seems more reasonable to rip it out than fix it.
Back-patch to 8.2 because an Assert failure is possible in corner cases.
Per examination of an example from Jim Nasby.
In HEAD, also get rid of AppendRelInfo.col_mappings, which is quite inadequate
to represent UNION ALL situations; depend entirely on translated_vars instead.
"base/11517/3767_fsm", instead of symbolic names like "1663/11517/3767/1",
per Alvaro's suggestion. I didn't change the messages in the higher-level
index, heap and FSM routines, though, where the fork is implicit.
specifically, we can input either the "format with designators" or the
"alternative format", and we can output the former when IntervalStyle is set
to iso_8601.
Ron Mayer
the length of a UTF8 character with pg_mblen (wrong if DB encoding isn't
UTF8), and the latter was blithely assuming that a static buffer would somehow
revert to all zeroes for each use.
("there might be triggers") rather than an exact count. This is necessary
catalog infrastructure for the upcoming patch to reduce the strength of
locking needed for trigger addition/removal. Split out and committed
separately for ease of reviewing/testing.
In passing, also get rid of the unused pg_class columns relukeys, relfkeys,
and relrefs, which haven't been maintained in many years and now have no
chance of ever being maintained (because of wishing to avoid locking).
Simon Riggs
from DateStyle, and create a new interval style that produces output matching
the SQL standard (at least for interval values that fall within the standard's
restrictions). IntervalStyle is also used to resolve the conflict between the
standard and traditional Postgres rules for interpreting negative interval
input.
Ron Mayer
(but not locked, as that would risk deadlocks). Also, make it work in a small
ring of buffers to avoid having bulk inserts trash the whole buffer arena.
Robert Haas, after an idea of Simon Riggs'.
data type. This patch takes the approach of allowing an optional hyphen after
each group of four hex digits.
Author: Robert Haas <robertmhaas@gmail.com>
from COMMITTED to SUBCOMMITTED during recovery. This wasn't previously
possible, but it is now due to the recent changes on clog commit protocol for
subtransactions.
Simon Riggs
upon requests from backends, rather than on a fixed 500msec cycle. (There's
still throttling logic to ensure it writes no more often than once per
500msec, though.) This should result in a significant reduction in stats file
write traffic in typical scenarios where the stats are demanded only
infrequently.
This approach also means that the former difficulty with changing
stats_temp_directory on-the-fly has gone away, so remove the caution about
that as well as the thrashing we did to minimize the trouble window.
In passing, also fix pgstat_report_stat() so that we will send a stats
message if we have function call stats but not table stats to report;
this fixes a bug in the recent patch to support function-call stats.
Martin Pihlak
allowed different processes to have different addresses for the shmem segment
in quite a long time, but there were still a few places left that used the
old coding convention. Clean them up to reduce confusion and improve the
compiler's ability to detect pointer type mismatches.
Kris Jurka
and heap_deformtuple in favor of the newer functions heap_form_tuple et al
(which do the same things but use bool control flags instead of arbitrary
char values). Eliminate the former duplicate coding of these functions,
reducing the deprecated functions to mere wrappers around the newer ones.
We can't get rid of them entirely because add-on modules probably still
contain many instances of the old coding style.
Kris Jurka
it just return void instead of sometimes returning a TupleTableSlot. SQL
functions don't need that anymore, and noplace else does either. Eliminating
the return value also means one less hassle for the ExecutorRun hook functions
that will be supported beginning in 8.4.
on non-full-page-image WAL records, and quite arbitrarily, only if there's
less than 20% free space on the page after the insert/update (not on HOT
updates, though). The 20% cutoff should avoid most of the overhead, when
replaying a bulk insertion, for example, while ensuring that pages that
are full are marked as full in the FSM.
This is mostly to avoid the nasty worst case scenario, where you replay
from a PITR archive, and the FSM information in the base backup is really
out of date. If there was a lot of pages that the outdated FSM claims to
have free space, but don't actually have any, the first unlucky inserter
after the recovery would traverse through all those pages, just to find
out that they're full. We didn't have this problem with the old FSM
implementation, because we simply threw the FSM information away on a
non-clean shutdown.
RETURNING clause, not just a SELECT as formerly.
A side effect of this patch is that when a set-returning SQL function is used
in a FROM clause, performance is improved because the output is collected into
a tuplestore within the function, rather than using the less efficient
value-per-call mechanism.
functions into one ReadBufferExtended function, that takes the strategy
and mode as argument. There's three modes, RBM_NORMAL which is the default
used by plain ReadBuffer(), RBM_ZERO, which replaces ZeroOrReadBuffer, and
a new mode RBM_ZERO_ON_ERROR, which allows callers to read corrupt pages
without throwing an error. The FSM needs the new mode to recover from
corrupt pages, which could happend if we crash after extending an FSM file,
and the new page is "torn".
Add fork number to some error messages in bufmgr.c, that still lacked it.
in the Global\ namespace, because it caused permission errors on
a lot of platforms.
We need to come up with something better for 8.4, but for now
revert to the pre-8.3.4 behaviour.
This basically takes some build system code that was previously labeled
"Solaris" and ties it to the compiler rather than the operating system.
Author: Julius Stroffek <Julius.Stroffek@Sun.COM>
backwards scan could actually happen. In particular, pass a flag to
materialize-mode SRFs that tells them whether they need to require random
access. In passing, also suppress unneeded backward-scan overhead for a
Portal's holdStore tuplestore. Per my proposal about reducing I/O costs for
tuplestores.
via a tuplestore instead of value-per-call. Refactor a few things to reduce
ensuing code duplication with nodeFunctionscan.c. This represents the
reasonably noncontroversial part of my proposed patch to switch SQL functions
over to returning tuplestores. For the moment, SQL functions still do things
the old way. However, this change enables PL SRFs to be called in targetlists
(observe changes in plperl regression results).
didn't actually work, because nodeRecursiveunion.c creates the underlying
tuplestore with backward scan disabled; which is a decision that we shouldn't
reverse because of performance cost. We could imagine adding signaling from
WorkTableScan to RecursiveUnion about whether backward scan is needed ...
but in practice it'd be a waste of effort, because there simply isn't any
current or plausible future scenario where WorkTableScan would be called on
to scan backward. So just dike out the code that claims to support it.
written to temp files by tuplesort.c and tuplestore.c. This saves 2 bytes per
row for 32-bit machines, and 6 bytes per row for 64-bit machines, which seems
worth the slight additional uglification of the tuple read/write routines.
recursion when we are unable to convert a localized error message to the
client's encoding. We've been over this ground before, but as reported by
Ibrar Ahmed, it still didn't work in the case of conversion failures for
the conversion-failure message itself :-(. Fix by installing a "circuit
breaker" that disables attempts to localize this message once we get into
recursion trouble.
Patch all supported branches, because it is in fact broken in all of them;
though I had to add some missing translations to the older branches in
order to expose the failure in the particular test case I was using.
treat Var and non-Var IN-list items differently. Only non-Var items are
candidates to go into an ANY(ARRAY) construct --- we put all Vars as separate
OR conditions on the grounds that that leaves more scope for optimization.
Per suggestion from Robert Haas.
into an OR of equality comparisons, rather than x = ANY(ARRAY[...]), when there
are Vars in the right-hand side. This avoids a performance regression compared
to pre-8.2 releases, in cases where the OR form can be optimized into scans
of multiple indexes. Limit the possible downside by preferring this form only
when the list isn't very long (I set the cutoff at 32 elements, which is a
bit arbitrary but in the right ballpark). Per discussion with Jim Nasby.
In passing, also make it try the OR form if it cannot select a common type
for the array elements; we've seen a complaint or two about how the OR form
worked for such cases and ARRAY doesn't.
recent proposal. In typical cases, we now need 12 bytes per insert or delete
event and 16 bytes per update event; previously we needed 40 bytes per
event on 32-bit hardware and 80 bytes per event on 64-bit hardware. Even
in the worst case usage pattern with a large number of distinct triggers being
fired in one query, usage is at most 32 bytes per event. It seems to be a
bit faster than the old code as well, due to reduction of palloc overhead.
This commit doesn't address the TODO item of allowing the event list to spill
to disk; rather it's trying to stave off the need for that. However, it
probably makes that task a bit easier by reducing the data structure's
dependency on pointers. It would now be practical to dump an event list to
disk by "chunks" instead of individual events.
of copy/paste:d emails. Much of the contents had already been migrated
into the main documentation, some was out of date and some just plain
wrong.
Keep the "protocol-flowchart" which can still be useful.
in their targetlists had better reset ps_TupFromTlist during ReScan calls.
There's no need to back-patch here since nodeAgg and nodeGroup didn't
even pretend to support SRFs in prior releases.
* make LDAP use this instead of the hacky previous method to specify
the DN to bind as
* make all auth options behave the same when they are not compiled
into the server
* rename "ident maps" to "user name maps", and support them for all
auth methods that provide an external username
This makes a backwards incompatible change in the format of pg_hba.conf
for the ident, PAM and LDAP authentication methods.
inputs is unique or nearly so), make eqjoinsel() clamp the ndistinct estimates
to be not more than the estimated number of rows coming from the input
relations. This allows the estimate to change in response to the selectivity
of restriction conditions on the inputs.
This is a pretty narrow patch and maybe we should be more aggressive about
similarly clamping ndistinct in other cases; but I'm worried about
double-counting the effects of the restriction conditions. However, it seems
to help for the case exhibited by Grzegorz Jaskiewicz (antijoin against a
small subset of a relation), so let's try this for awhile.
until vars are distributed to rels during query_planner() startup. We don't
really need it before that, and not building it early has some advantages.
First, we don't need to put it through the various preprocessing steps, which
saves some cycles and eliminates the need for a number of routines to support
PlaceHolderInfo nodes at all. Second, this means one less unused plan for any
sub-SELECT appearing in a placeholder's expression, since we don't build
placeholder_list until after sublink expansion is complete.
