Since 19252e8ec9 we reject Python 2 during build configuration. Now that the
dust on the buildfarm has settled, remove extension variants specific to
Python 2.
Reviewed-By: Peter Eisentraut <peter@eisentraut.org>
Reviewed-By: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20211031184548.g4sxfe47n2kyi55r@alap3.anarazel.de
9e98583 introduced a helper to centralize building their needed state
(tuplestore, tuple descriptors, etc.), checking for any errors. This
commit updates all places of contrib/ that can be switched to use
SetSingleFuncCall() as a drop-in replacement, resulting in the removal
of a lot of boilerplate code in all the modules updated by this commit.
Per analysis, some places remain as they are:
- pg_logdir_ls() in adminpack/ uses historically TYPEFUNC_RECORD as
return type, and I suspect that changing it may cause issues at run-time
with some of its past versions, down to 1.0.
- dblink/ uses a wrapper function doing exactly the work of
SetSingleFuncCall(). Here the switch should be possible, but rather
invasive so it does not seem the extra backpatch maintenance cost.
- tablefunc/, similarly, uses multiple helper functions with portions of
SetSingleFuncCall() spread across the code paths of this module.
Author: Melanie Plageman
Discussion: https://postgr.es/m/CAAKRu_bvDPJoL9mH6eYwvBpPtTGQwbDzfJbCM-OjkSZDu5yTPg@mail.gmail.com
This new function extracts common code from PrepareQuery() and
exec_parse_message(). It is then exactly analogous to the existing
pg_analyze_and_rewrite_fixedparams() and
pg_analyze_and_rewrite_withcb().
To unify these two code paths, this makes PrepareQuery() now subject
to log_parser_stats. Also, both paths now invoke
TRACE_POSTGRESQL_QUERY_REWRITE_START(). PrepareQuery() no longer
checks whether a utility statement was specified. The grammar doesn't
allow that anyway, and exec_parse_message() supports it, so
restricting it doesn't seem necessary.
This also adds QueryEnvironment support to the *varparams functions,
for consistency with its cousins, even though it is not used right
now.
Reviewed-by: Nathan Bossart <bossartn@amazon.com>
Discussion: https://www.postgresql.org/message-id/flat/c67ce276-52b4-0239-dc0e-39875bf81840@enterprisedb.com
Previously, the message for logical replication worker errcontext is
incrementally built, which was not translation friendly. Instead, we use
complete sentences with if-else branches.
We also remove the commit timestamp from the context message since it's
not important information and made the message long.
Author: Masahiko Sawada
Reviewed-by: Takamichi Osumi, and Amit Kapila
Discussion: https://postgr.es/m/CAD21AoBarBf2oTF71ig2g_o=3Z_Dt6_sOpMQma1kFgbnA5OZ_w@mail.gmail.com
Set-returning functions that use the Materialize mode, creating a
tuplestore to include all the tuples returned in a set rather than doing
so in multiple calls, use roughly the same set of steps to prepare
ReturnSetInfo for this job:
- Check if ReturnSetInfo supports returning a tuplestore and if the
materialize mode is enabled.
- Create a tuplestore for all the tuples part of the returned set in the
per-query memory context, stored in ReturnSetInfo->setResult.
- Build a tuple descriptor mostly from get_call_result_type(), then
stored in ReturnSetInfo->setDesc. Note that there are some cases where
the SRF's tuple descriptor has to be the one specified by the function
caller.
This refactoring is done so as there are (well, should be) no behavior
changes in any of the in-core functions refactored, and the centralized
function that checks and sets up the function's ReturnSetInfo can be
controlled with a set of bits32 options. Two of them prove to be
necessary now:
- SRF_SINGLE_USE_EXPECTED to use expectedDesc as tuple descriptor, as
expected by the function's caller.
- SRF_SINGLE_BLESS to validate the tuple descriptor for the SRF.
The same initialization pattern is simplified in 28 places per my
count as of src/backend/, shaving up to ~900 lines of code. These
mostly come from the removal of the per-query initializations and the
sanity checks now grouped in a single location. There are more
locations that could be simplified in contrib/, that are left for a
follow-up cleanup.
fcc2817, 07daca5 and d61a361 have prepared the areas of the code related
to this change, to ease this refactoring.
Author: Melanie Plageman, Michael Paquier
Reviewed-by: Álvaro Herrera, Justin Pryzby
Discussion: https://postgr.es/m/CAAKRu_azyd1Z3W_r7Ou4sorTjRCs+PxeHw1CWJeXKofkE6TuZg@mail.gmail.com
Slow hosts may avoid load-induced, spurious failures by setting
environment variable PG_TEST_TIMEOUT_DEFAULT to some number of seconds
greater than 180. Developers may see faster failures by setting that
environment variable to some lesser number of seconds. In tests, write
$PostgreSQL::Test::Utils::timeout_default wherever the convention has
been to write 180. This change raises the default for some briefer
timeouts. Back-patch to v10 (all supported versions).
Discussion: https://postgr.es/m/20220218052842.GA3627003@rfd.leadboat.com
pg_regress reported "Unix socket" as the default location whenever
HAVE_UNIX_SOCKETS is defined. However, that's not been accurate
on Windows since 8f3ec75de. Update this logic to match what libpq
actually does now.
This is just cosmetic, but still it's potentially misleading.
Back-patch to v13 where 8f3ec75de came in.
Discussion: https://postgr.es/m/3894060.1646415641@sss.pgh.pa.us
There are three parallel ways to call parse/analyze: with fixed
parameters, with variable parameters, and by supplying your own parser
callback. Some of the involved functions were confusingly named and
made this API structure more confusing. This patch renames some
functions to make this clearer:
parse_analyze() -> parse_analyze_fixedparams()
pg_analyze_and_rewrite() -> pg_analyze_and_rewrite_fixedparams()
(Otherwise one might think this variant doesn't accept parameters, but
in fact all three ways accept parameters.)
pg_analyze_and_rewrite_params() -> pg_analyze_and_rewrite_withcb()
(Before, and also when considering pg_analyze_and_rewrite(), one might
think this is the only way to pass parameters. Moreover, the parser
callback doesn't necessarily need to parse only parameters, it's just
one of the things it could do.)
parse_fixed_parameters() -> setup_parse_fixed_parameters()
parse_variable_parameters() -> setup_parse_variable_parameters()
(These functions don't actually do any parsing, they just set up
callbacks to use during parsing later.)
This patch also adds some const decorations to the fixed-parameters
API, so the distinction from the variable-parameters API is more
clear.
Reviewed-by: Nathan Bossart <bossartn@amazon.com>
Discussion: https://www.postgresql.org/message-id/flat/c67ce276-52b4-0239-dc0e-39875bf81840@enterprisedb.com
Commit 52e4f0cd47 didn't add tests for pg_dump support, so add a few tests
for it. Additionally, verify that catalogs are updated after few
ALTER PUBLICATION commands that modify row filters by using \d.
Reported-by: Tomas Vondra
Author: Shi yu, based on initial by Tomas Vondra
Reviewed-by: Euler Taveira and Amit Kapila
Discussion: https://postgr.es/m/6bdbd7fc-e81a-9a77-d963-24adeb95f29e@enterprisedb.com
This code seems to have been written on the assumption that
"unsigned long" is 32 bits; or at any rate it ignored the
possibility of conversion overflow. Rewrite, borrowing some
logic from oidin().
Discussion: https://postgr.es/m/3441768.1646343914@sss.pgh.pa.us
There's no visible point in casting the result of a comparison to
bool, because it already is that, at least on C99 compilers.
I see no point in these assertions that a pointer we're about to
dereference isn't null, either. If it is, the resulting SIGSEGV
will notify us of the problem just fine.
Noted while reviewing Zhihong Yu's patch. This is basically
cosmetic, so no need for back-patch.
Discussion: https://postgr.es/m/CALNJ-vT9r0DSsAOw9OXVJFxLENoVS_68kJ5x0p44atoYH+H4dg@mail.gmail.com
This macro cast the result to BlockNumber after shifting, not before,
which is the wrong thing. Per the C spec, the uint16 fields would
promote to int not unsigned int, so that (for 32-bit int) the shift
potentially shifts a nonzero bit into the sign position. I doubt
there are any production systems where this would actually end with
the wrong answer, but it is undefined behavior per the C spec, and
clang's -fsanitize=undefined option reputedly warns about it on some
platforms. (I can't reproduce that right now, but the code is
undeniably wrong per spec.) It's easy to fix by casting to
BlockNumber (uint32) in the proper places.
It's been wrong for ages, so back-patch to all supported branches.
Report and patch by Zhihong Yu (cosmetic tweaking by me)
Discussion: https://postgr.es/m/CALNJ-vT9r0DSsAOw9OXVJFxLENoVS_68kJ5x0p44atoYH+H4dg@mail.gmail.com
Most of these are cases where we could call memcpy() or other libc
functions with a NULL pointer and a zero count, which is forbidden
by POSIX even though every production version of libc allows it.
We've fixed such things before in a piecemeal way, but apparently
never made an effort to try to get them all. I don't claim that
this patch does so either, but it gets every failure I observe in
check-world, using clang 12.0.1 on current RHEL8.
numeric.c has a different issue that the sanitizer doesn't like:
"ln(-1.0)" will compute log10(0) and then try to assign the
resulting -Inf to an integer variable. We don't actually use the
result in such a case, so there's no live bug.
Back-patch to all supported branches, with the idea that we might
start running a buildfarm member that tests this case. This includes
back-patching c1132aae3 (Check the size in COPY_POINTER_FIELD),
which previously silenced some of these issues in copyfuncs.c.
Discussion: https://postgr.es/m/CALNJ-vT9r0DSsAOw9OXVJFxLENoVS_68kJ5x0p44atoYH+H4dg@mail.gmail.com
This function has been incorrectly marked as a set-returning function
with prorows (estimated number of rows) set to 1 since its creation in
7117685, that introduced non-exclusive backups. There is no need for
that as the function is designed to return only one tuple.
This commit fixes the catalog definition of pg_stop_backup_v2() so as it
is not marked as proretset anymore, with prorows set to 0. This
simplifies its internals by removing one tuplestore (used for one single
record anyway) and by removing all the checks related to a set-returning
function.
Issue found during my quest to simplify some of the logic used in
in-core system functions.
Bump catalog version.
Reviewed-by: Aleksander Alekseev, Kyotaro Horiguchi
Discussion: https://postgr.es/m/Yh8guT78f1Ercfzw@paquier.xyz
The checks currently done at the startup of pg_upgrade on PGHOST and
PGHOSTADDR to avoid any attempts to access to an external cluster fail
setting those parameters to Windows paths or even temporary paths
prefixed by an '@', as it only considers as a valid path strings
beginning with a slash.
As mentioned by Andres, is_unixsock_path() is designed to detect such
cases, so, like any other code paths dealing with the same problem (psql
and libpq), use it rather than assuming that all valid paths are
prefixed with just a slash.
This issue has been found while testing the TAP tests of pg_upgrade
through the CI on Windows. This is a bug, but nobody has complained
about it since pg_upgrade exists so no backpatch is done, at least for
now.
Analyzed-by: Andres Freund, Michael Paquier
Discussion: https://postgr.es/m/YeYj4DU5qY/rtKXT@paquier.xyz
pg_rewind generates and executes internally up to two commands to work
on the target cluster, depending on the options given by its caller:
- postgres -C to retrieve the value of restore_command, when using
-c/--restore-target-wal.
- postgres --single to enforce recovery once and get the target cluster
in a clean shutdown state.
Both commands have been applying incorrect quoting rules, which could
lead to failures when for example using a target data directory with
unexpected characters like CRLFs. Those commands are now generated with
PQExpBuffer, making use of string_utils.h to quote those commands as
they should. We may extend those commands in the future with more
options, so this makes any upcoming additions easier.
This is arguably a bug fix, but nobody has complained about the existing
code being a problem either, so no backpatch is done.
Extracted from a larger patch by the same author.
Author: Gunnar "Nick" Bluth
Discussion: https://postgr.es/m/7c59265d-ac50-b0aa-ca1e-65e8bd27642a@pro-open.de
It was decided (refer to the Discussion link below) that the stats
collector is not an appropriate place to store the error information of
subscription workers.
This patch changes the pg_stat_subscription_workers view (introduced by
commit 8d74fc96db) so that it stores only statistics counters:
apply_error_count and sync_error_count, and has one entry for
each subscription. The removed error information such as error-XID and
the error message would be stored in another way in the future which is
more reliable and persistent.
After removing these error details, there is no longer any relation
information, so the subscription statistics are now a cluster-wide
statistics.
The patch also changes the view name to pg_stat_subscription_stats since
the word "worker" is an implementation detail that we use one worker for
one tablesync and one apply.
Author: Masahiko Sawada, based on suggestions by Andres Freund
Reviewed-by: Peter Smith, Haiying Tang, Takamichi Osumi, Amit Kapila
Discussion: https://postgr.es/m/20220125063131.4cmvsxbz2tdg6g65@alap3.anarazel.de
justify_interval, justify_hours, and justify_days didn't check for
overflow when promoting hours to days or days to months; but that's
possible when the upper field's value is already large. Detect and
report any such overflow.
Also, we can avoid unnecessary overflow in some cases in justify_interval
by pre-justifying the days field. (Thanks to Nathan Bossart for this
idea.)
Joe Koshakow
Discussion: https://postgr.es/m/CAAvxfHeNqsJ2xYFbPUf_8nNQUiJqkag04NW6aBQQ0dbZsxfWHA@mail.gmail.com
This change makes libpq apply the same private-key-file ownership
and permissions checks that we have used in the backend since commit
9a83564c5. Namely, that the private key can be owned by either the
current user or root (with different file permissions allowed in the
two cases). This allows system-wide management of key files, which
is just as sensible on the client side as the server, particularly
when the client is itself some application daemon.
Sync the comments about this between libpq and the backend, too.
David Steele
Discussion: https://postgr.es/m/f4b7bc55-97ac-9e69-7398-335e212f7743@pgmasters.net
This is pretty queasy-making on general principles, and the more so
once you notice that CommitTransactionCommand() is actually stomping
on the values saved by _SPI_commit(). It's okay as long as the
active values didn't change during HoldPinnedPortals(); but that's
a larger assumption than I think we want to make, especially since
the fix is so simple.
Discussion: https://postgr.es/m/1533956.1645731245@sss.pgh.pa.us
SPI_commit previously left it up to the caller to recover from any error
occurring during commit. Since that's complicated and requires use of
low-level xact.c facilities, it's not too surprising that no caller got
it right. Let's move the responsibility for cleanup into spi.c. Doing
that requires redefining SPI_commit as starting a new transaction, so
that it becomes equivalent to SPI_commit_and_chain except that you get
default transaction characteristics instead of preserving the prior
transaction's characteristics. We can make this pretty transparent
API-wise by redefining SPI_start_transaction() as a no-op. Callers
that expect to do something in between might be surprised, but
available evidence is that no callers do so.
Having made that API redefinition, we can fix this mess by having
SPI_commit[_and_chain] trap errors and start a new, clean transaction
before re-throwing the error. Likewise for SPI_rollback[_and_chain].
Some cleanup is also needed in AtEOXact_SPI, which was nowhere near
smart enough to deal with SPI contexts nested inside a committing
context.
While plperl and pltcl need no changes beyond removing their now-useless
SPI_start_transaction() calls, plpython needs some more work because it
hadn't gotten the memo about catching commit/rollback errors in the
first place. Such an error resulted in longjmp'ing out of the Python
interpreter, which leaks Python stack entries at present and is reported
to crash Python 3.11 altogether. Add the missing logic to catch such
errors and convert them into Python exceptions.
We are probably going to have to back-patch this once Python 3.11 ships,
but it's a sufficiently basic change that I'm a bit nervous about doing
so immediately. Let's let it bake awhile in HEAD first.
Peter Eisentraut and Tom Lane
Discussion: https://postgr.es/m/3375ffd8-d71c-2565-e348-a597d6e739e3@enterprisedb.com
Discussion: https://postgr.es/m/17416-ed8fe5d7213d6c25@postgresql.org
Since commit ffa2e4670, libpq resets conn->errorMessage only when
starting a new query. However, the later introduction of pipelining
requires a further refinement: the "start of query" isn't necessarily
when it's submitted to PQsendQueryStart. If we clear at that point
then we risk dropping text for an error that the application has not
noticed yet. Instead, when queuing a query while a previous query is
still in flight, leave errorMessage alone; reset it when we begin
to process the next query in pqPipelineProcessQueue.
Perhaps this should be back-patched to v14 where ffa2e4670 came in.
However I'm uncertain about whether it interacts with 618c16707.
In the absence of user complaints, leave v14 alone.
Discussion: https://postgr.es/m/1421785.1645723238@sss.pgh.pa.us
Formerly div_var() had "fast path" short division code that was
significantly faster when the divisor was just one base-NBASE digit,
but otherwise used long division.
This commit adds a new function div_var_int() that divides by an
arbitrary 32-bit integer, using the fast short division algorithm, and
updates both div_var() and div_var_fast() to use it for one and two
digit divisors. In the case of div_var(), this is slightly faster in
the one-digit case, because it avoids some digit array copying, and is
much faster in the two-digit case where it replaces long division. For
div_var_fast(), it is much faster in both cases because the main
div_var_fast() algorithm is optimised for larger inputs.
Additionally, optimise exp() and ln() by using div_var_int(), allowing
a NumericVar to be replaced by an int in a couple of places, most
notably in the Taylor series code. This produces a significant speedup
of exp(), ln() and the numeric_big regression test.
Dean Rasheed, reviewed by Tom Lane.
Discussion: https://postgr.es/m/CAEZATCVwsBi-ND-t82Cuuh1=8ee6jdOpzsmGN+CUZB6yjLg9jw@mail.gmail.com
In the standard numeric division algorithm, the inner loop multiplies
the divisor by the next quotient digit and subtracts that from the
working dividend. As suggested by the original code comment, the
separate "carry" and "borrow" variables (from the multiplication and
subtraction steps respectively) can be folded together into a single
variable. Doing so significantly improves performance, as well as
simplifying the code.
Dean Rasheed, reviewed by Tom Lane.
Discussion: https://postgr.es/m/CAEZATCVwsBi-ND-t82Cuuh1=8ee6jdOpzsmGN+CUZB6yjLg9jw@mail.gmail.com
This loop is basically the same as the inner loop of mul_var(), which
was auto-vectorized in commit 8870917623, but the compiler will only
consider auto-vectorizing the div_var_fast() loop if the assignment
target div[qi + i] is replaced by div_qi[i], where div_qi = &div[qi].
Additionally, since the compiler doesn't know that qdigit is
guaranteed to fit in a 16-bit NumericDigit, cast it to NumericDigit
before multiplying to make the resulting auto-vectorized code more
efficient (avoiding unnecessary multiplication of the high 16 bits).
While at it, per suggestion from Tom Lane, change var1digit in
mul_var() to be a NumericDigit rather than an int for the same
reason. This actually makes no difference with modern gcc, but it
might help other compilers generate more efficient assembly.
Dean Rasheed, reviewed by Tom Lane.
Discussion: https://postgr.es/m/CAEZATCVwsBi-ND-t82Cuuh1=8ee6jdOpzsmGN+CUZB6yjLg9jw@mail.gmail.com
The old form of the test needed a bunch of custom infrastructure. These days
tap tests provide the necessary infrastructure to do better.
We discussed whether to move this test to src/test/modules, alongside
libpq_pipeline, but concluded that the opposite direction would be
better. libpq_pipeline will be moved at a later date, once the buildfarm and
msvc build infrastructure is ready for it.
The invocation of the tap test will be added in the next commit. It involves
just enough buildsystem changes to be worth commiting separately. Can't happen
the other way round because prove errors out when invoked without tests.
Discussion: https://postgr.es/m/20220223203031.ezrd73ohvjgfksow@alap3.anarazel.de
See also afdeff1052. Failures after that commit provided a few more hints,
but not yet enough to understand what's going on.
In 019_replslot_limit.pl shut down nodes with fast instead of immediate mode
if we observe the failure mode. That should tell us whether the failures we're
observing are just a timing issue under high load. PGCTLTIMEOUT should prevent
buildfarm animals from hanging endlessly.
Also adds a bit more logging to replication slot drop and ShutdownPostgres().
Discussion: https://postgr.es/m/20220225192941.hqnvefgdzaro6gzg@alap3.anarazel.de
Perl can be convinced to execute user-defined code during compilation
of a plperl function (or at least a plperlu function). That's not
such a big problem as long as the activity is confined within the
Perl interpreter, and it's not clear we could do anything about that
anyway. However, if such code tries to use plperl's SPI functions,
we have a bigger problem. In the first place, those functions are
likely to crash because current_call_data->prodesc isn't set up yet.
In the second place, because it isn't set up, we lack critical info
such as whether the function is supposed to be read-only. And in
the third place, this path allows code execution during function
validation, which is strongly discouraged because of the potential
for security exploits. Hence, reject execution of the SPI functions
until compilation is finished.
While here, add check_spi_usage_allowed() calls to various functions
that hadn't gotten the memo about checking that. I think that perhaps
plperl_sv_to_literal may have been intentionally omitted on the grounds
that it was safe at the time; but if so, the addition of transforms
functionality changed that. The others are more recently added and
seem to be flat-out oversights.
Per report from Mark Murawski. Back-patch to all supported branches.
Discussion: https://postgr.es/m/9acdf918-7fff-4f40-f750-2ffa84f083d2@intellasoft.net
When opening a WAL file smaller than XLOG_BLCKSZ (e.g. 0 bytes long) while
determining the wal_segment_size, pg_waldump checked errno, despite errno not
being set by the short read. Resulting in a bogus error message.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220214.181847.775024684568733277.horikyota.ntt@gmail.com
Backpatch: 11-, the bug was introducedin fc49e24fa
Commit 49c9d9fc unified VACUUM VERBOSE and autovacuum logging. It
neglected to remove an old vacrel field that was only used by the old
VACUUM VERBOSE, so remove it now.
The previous num_tuples approach doesn't seem to have any real advantage
over the approach VACUUM VERBOSE takes now (also the approach used by
the autovacuum logging code), which is to show new_rel_tuples.
new_rel_tuples is the possibly-estimated total number of tuples left in
the table, whereas num_tuples meant the number of tuples encountered
during the VACUUM operation, after pruning, without regard for tuples
from pages skipped via the visibility map.
In passing, reorder a related vacrel field for consistency.
The buffer argument hasn't been used since the function was first added
by commit bbb6e559c4. The sibling heap_prepare_freeze_tuple function
doesn't have such an argument either. Remove it.
realloc() will return NULL on a failed reallocation, so the destination
pointer must be inspected to avoid null pointer dereference. Further,
assigning the return value to the source pointer leak the allocation in
the case of reallocation failure. Fix by using pg_realloc instead which
has full error handling.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/9FC7E603-9246-4C62-B466-A39CFAF454AE@yesql.se
If a checkpoint happens during sorted GiST index build, and the system
crashes after the checkpoint and after the index build has finished,
the data written to the index before the checkpoint started could be
lost. The checkpoint won't fsync it, and it won't be replayed at crash
recovery either. Fix by calling smgrimmedsync() after the index build,
just like in B-tree index build.
Backpatch to v14 where the sorted GiST index build was introduced.
Reported-by: Melanie Plageman
Discussion: https://www.postgresql.org/message-id/CAAKRu_ZJJynimxKj5xYBSziL62-iEtPE+fx-B=JzR=jUtP92mw@mail.gmail.com
This makes more consistent the SRF-related checks in the area of
PL/pgSQL, PL/Perl, PL/Tcl, pageinspect and some of the JSON worker
functions, making it easier to grep for the same error patterns through
the code, reducing a bit the translation work.
It is worth noting that each_worker_jsonb()/each_worker() in jsonfuncs.c
and pageinspect's brin_page_items() were doing a check on expectedDesc
that is not required as they fetch their tuple descriptor directly from
get_call_result_type(). This looks like a set of copy-paste errors that
have spread over the years.
This commit is a continuation of the changes begun in 07daca5, for any
remaining code paths on sight. Like fcc2817, this makes the code more
consistent, easing the integration of a larger patch that will refactor
the way tuplestores are created and checked in a good portion of the
set-returning functions present in core.
I have worked my way through the changes of this patch by myself, and
Ranier has proposed the same changes in a different thread in parallel,
though there were some inconsistencies related in expectedDesc in what
was proposed by him.
Author: Michael Paquier, Ranier Vilela
Discussion: https://postgr.es/m/CAAKRu_azyd1Z3W_r7Ou4sorTjRCs+PxeHw1CWJeXKofkE6TuZg@mail.gmail.com
Discussion: https://postgr.es/m/CAEudQApm=AFuJjEHLBjBcJbxcw4pBMwg2sHwXyCXYcbBOj3hpg@mail.gmail.com