currently does. This is now the default Win32 wal sync method because
we perfer o_datasync to fsync.
Also, change Win32 fsync to a new wal sync method called
fsync_writethrough because that is the behavior of _commit, which is
what is used for fsync on Win32.
Backpatch to 8.0.X.
explicit paths, so that the log can be replayed in a data directory
with a different absolute path than the original had. To avoid forcing
initdb in the 8.0 branch, continue to accept the old WAL log record
types; they will never again be generated however, and the code can be
dropped after the next forced initdb. Per report from Oleg Bartunov.
We still need to think about what it really means to WAL-log CREATE
TABLESPACE commands: we more or less have to put the absolute path
into those, but how to replay in a different context??
PageIndexTupleDelete() with a single pass of compactification ---
logic mostly lifted from PageRepairFragmentation. I noticed while
profiling that a VACUUM that's cleaning up a whole lot of deleted
tuples would spend as much as a third of its CPU time in
PageIndexTupleDelete; not too surprising considering the loop method
was roughly O(N^2) in the number of tuples involved.
convention for isnull flags. Also, remove the useless InsertIndexResult
return struct from index AM aminsert calls --- there is no reason for
the caller to know where in the index the tuple was inserted, and we
were wasting a palloc cycle per insert to deliver this uninteresting
value (plus nontrivial complexity in some AMs).
I forced initdb because of the change in the signature of the aminsert
routines, even though nothing really looks at those pg_proc entries...
to write out data that we are about to tell the filesystem to drop.
smgr_internal_unlink already had a DropRelFileNodeBuffers call to
get rid of dead buffers without a write after it's no longer possible
to roll back the deleting transaction. Adding a similar call in
smgrtruncate simplifies callers and makes the overall division of
labor clearer. This patch removes the former behavior that VACUUM
would write all dirty buffers of a relation unconditionally.
grouping_planner() to preprocess_targetlist(), according to a comment
in grouping_planner(). I think the refactoring makes sense, and moves
some extraneous details out of grouping_planner().
of tuples when passing data up through multiple plan nodes. A slot can now
hold either a normal "physical" HeapTuple, or a "virtual" tuple consisting
of Datum/isnull arrays. Upper plan levels can usually just copy the Datum
arrays, avoiding heap_formtuple() and possible subsequent nocachegetattr()
calls to extract the data again. This work extends Atsushi Ogawa's earlier
patch, which provided the key idea of adding Datum arrays to TupleTableSlots.
(I believe however that something like this was foreseen way back in Berkeley
days --- see the old comment on ExecProject.) A test case involving many
levels of join of fairly wide tables (about 80 columns altogether) showed
about 3x overall speedup, though simple queries will probably not be
helped very much.
I have also duplicated some code in heaptuple.c in order to provide versions
of heap_formtuple and friends that use "bool" arrays to indicate null
attributes, instead of the old convention of "char" arrays containing either
'n' or ' '. This provides a better match to the convention used by
ExecEvalExpr. While I have not made a concerted effort to get rid of uses
of the old routines, I think they should be deprecated and eventually removed.
locale is C.
Backpatch to 8.0.X because some operating systems were throwing errors
for such operations, rather than ignoring the locale when it was C.
a tuple are being accessed via ExecEvalVar and the attcacheoff shortcut
isn't usable (due to nulls and/or varlena columns). To do this, cache
Datums extracted from a tuple in the associated TupleTableSlot.
Also some code cleanup in and around the TupleTable handling.
Atsushi Ogawa with some kibitzing by Tom Lane.
whether or not it is a security definer. Changing a function's strictness
is required by SQL2003, and the other capabilities make sense. Also, allow
an optional RESTRICT noise word to be specified, for SQL conformance.
Some trivial regression tests added and the documentation has been
updated.
Document use of macros for pg_printf functions.
Bump major versions of all interfaces to handle movement of get_progname
from libpq to libpgport in 8.0, and probably other libpgport changes in 8.1.
Formerly, if such a clause contained no aggregate functions we mistakenly
treated it as equivalent to WHERE. Per spec it must cause the query to
be treated as a grouped query of a single group, the same as appearance
of aggregate functions would do. Also, the HAVING filter must execute
after aggregate function computation even if it itself contains no
aggregate functions.
before we can invoke fork() -- flush stdio buffers, save and restore the
profiling timer on Linux with LINUX_PROFILE, and handle BeOS stuff. This
patch moves that code into a single function, fork_process(), instead of
duplicating it at the various callsites of fork().
This patch doesn't address the EXEC_BACKEND case; there is room for
further cleanup there.
number of palloc calls. This has a salutory impact on plpgsql operations
with record variables (which create and destroy tupdescs constantly)
and probably helps a bit in some other cases too.
on-the-fly, and thereby avoid blowing out memory when the planner has
underestimated the hash table size. Hash join will now obey the
work_mem limit with some faithfulness. Per my recent proposal
(hash aggregate part isn't done yet though).
the freelist, plus per-buffer spinlocks that protect access to individual
shared buffer headers. This requires abandoning a global freelist (since
the freelist is a global contention point), which shoots down ARC and 2Q
as well as plain LRU management. Adopt a clock sweep algorithm instead.
Preliminary results show substantial improvement in multi-backend situations.
in favor of looking at the flat file copy of pg_database during backend
startup. This should finally eliminate the various corner cases in which
backend startup fails unexpectedly because it isn't able to distinguish
live and dead tuples in pg_database. Simplify locking on pg_database
to be similar to the rules used with pg_shadow and pg_group, and eliminate
FlushRelationBuffers operations that were used only to reduce the odds
of failure of GetRawDatabaseInfo.
initdb forced due to addition of a trigger to pg_database.
the AMI_OVERRIDE flag. The fact that TransactionLogFetch treats
BootstrapTransactionId as always committed is sufficient to make
bootstrap work, and getting rid of extra tests in heavily used code
paths seems like a win. The files produced by initdb are demonstrably
the same after this change.
in GetNewTransactionId(). Since the limit value has to be computed
before we run any real transactions, this requires adding code to database
startup to scan pg_database and determine the oldest datfrozenxid.
This can conveniently be combined with the first stage of an attack on
the problem that the 'flat file' copies of pg_shadow and pg_group are
not properly updated during WAL recovery. The code I've added to
startup resides in a new file src/backend/utils/init/flatfiles.c, and
it is responsible for rewriting the flat files as well as initializing
the XID wraparound limit value. This will eventually allow us to get
rid of GetRawDatabaseInfo too, but we'll need an initdb so we can add
a trigger to pg_database.
tests. Contributed by Koju Iijima, review from Neil Conway, Gavin Sherry
and Tom Lane.
Also, fix error in description of WITH CHECK OPTION clause in the CREATE
VIEW reference page: it should be "CASCADED", not "CASCADE".
look at the actual aggregate transition datatypes and the actual overhead
needed by nodeAgg.c, instead of using pessimistic round numbers.
Per a discussion with Michael Tiemann.
command. This is useful because we can allow truncation of tables
referenced by foreign keys, so long as the referencing table is
truncated in the same command.
Alvaro Herrera
(1) Keep a pin on the scan's current buffer and mark buffer. This
avoids the need to do a ReadBuffer() for each tuple produced by the
scan. Since ReadBuffer() is expensive, this is a significant win.
(2) Convert a ReleaseBuffer(); ReadBuffer() pair into
ReleaseAndReadBuffer(). Surely not a huge win, but it saves a lock
acquire/release...
(3) Remove a bunch of duplicated code in rtget.c; make rtnext() handle
both the "initial result" and "subsequent result" cases.
(4) Add support for index tuple killing
(5) Remove rtscancache(): it is dead code, for the same reason that
gistscancache() is dead code (an index scan ought not be invoked with
NoMovementScanDirection).
The end result is about a 10% improvement in rtree index scan perf,
according to contrib/rtree_gist/bench.
so that we can get the size of a shared inval message back down to what it
was in 7.4 (and simplify the logic too). Phase 2 of fixing the
'SMgrRelation hashtable corrupted' problem.
is the minimum required fix. I want to look next at taking advantage of
it by simplifying the message semantics in the shared inval message queue,
but that part can be held over for 8.1 if it turns out too ugly.
consistent. On Unix we now always consult getpwuid(); $HOME isn't used
at all. On Windows the code currently consults $USERPROFILE, or $HOME
if that's not defined, but I expect this will change as soon as the win32
hackers come to a consensus. Nothing done yet about changing the file
names used underneath $USERPROFILE.
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
to shared memory as soon as possible, ie, right after read_backend_variables.
The effective difference from the original code is that this happens
before instead of after read_nondefault_variables(), which loads GUC
information and is apparently capable of expanding the backend's memory
allocation more than you'd think it should. This should fix the
failure-to-attach-to-shared-memory reports we've been seeing on Windows.
Also clean up a few bits of unnecessarily grotty EXEC_BACKEND code.
(rd_att) field of a nailed-in-cache relcache entry. This fixes the bug
reported by Alvaro 8-Dec-2004; I believe it probably also explains
Grant Finnemore's report of 10-Sep-2004.
In an unrelated change in the same file, put back 7.4's response to
failure to rename() the relcache init file, ie, unlink the useless
temp file. I did not put back the warning message, since there might
actually be some reason not to have that.
of an inheritance child table is binary-compatible with the rowtype of
its parent, invent an expression node type that does the conversion
correctly. Fixes the new bug exhibited by Kris Shannon as well as a
lot of old bugs that would only show up when using multiple inheritance
or after altering the parent table.
a relation's number of blocks, rather than the possibly-obsolete value
in pg_class.relpages. Scale the value in pg_class.reltuples correspondingly
to arrive at a hopefully more accurate number of rows. When pg_class
contains 0/0, estimate a tuple width from the column datatypes and divide
that into current file size to estimate number of rows. This improved
methodology allows us to jettison the ancient hacks that put bogus default
values into pg_class when a table is first created. Also, per a suggestion
from Simon, make VACUUM (but not VACUUM FULL or ANALYZE) adjust the value
it puts into pg_class.reltuples to try to represent the mean tuple density
instead of the minimal density that actually prevails just after VACUUM.
These changes alter the plans selected for certain regression tests, so
update the expected files accordingly. (I removed join_1.out because
it's not clear if it still applies; we can add back any variant versions
as they are shown to be needed.)
to be processed by GUC before InitPostgres, because any required lookup
of the encoding conversion function has to be done during InitializeClientEncoding.
So, I broke this last week by moving GUC processing to after InitPostgres :-(.
What we can do as a compromise is process non-SUSET variables during
command line scanning (the same as before), and postpone the processing
of only SUSET variables. None of the SUSET variables need to be set
before InitPostgres.
even uglier than it was already :-(. Also, on Windows only, use temporary
shared memory segments instead of ordinary files to pass over critical
variable values from postmaster to child processes. Magnus Hagander
We don't really want to start a new SPI connection, just keep using the old
one; otherwise we have memory management problems as illustrated by
John Kennedy's bug report of today. This requires a bit of a hack to
ensure the SPI stack state is properly restored, but then again what we
were doing before was a hack too, strictly speaking. Add a regression
test to cover this case.
plain SUSET instead. Also delay processing of options received in
client connection request until after we know if the user is a superuser,
so that SUSET values can be set that way by legitimate superusers.
Per recent discussion.
shared memory segment ID. If we can't access the existing shmem segment,
it must not be relevant to our data directory. If we can access it,
then attach to it and check for an actual match to the data directory.
This should avoid some cases of failure-to-restart-after-boot without
introducing any significant risk of failing to detect a still-running
old backend.
estimates when combining the estimates for a range query. As pointed out
by Miquel van Smoorenburg, the existing check for an impossible combined
result would quite possibly fail to detect one default and one non-default
input. It seems better to use the default range query estimate in such
cases. To do so, add a check for an estimate of exactly DEFAULT_INEQ_SEL.
This is a bit ugly because it introduces additional coupling between
clauselist_selectivity and scalarltsel/scalargtsel, but it's not like
there wasn't plenty already...
actual executable location. This allows people to continue to use
setups where, eg, postmaster is symlinked from a convenient place.
Per gripe from Josh Berkus.
type-and-length coercion function, make sure that the coercion function
is told the correct typmod. Fixes Kris Jurka's example of a domain
over bit(N).
everywhere not just some places, get rid of . and .. when joining path
sections together. This should eliminate most of the ugly paths like
/foo/bar/./baz that we've been generating.
clause implicitly whenever one is not given explicitly. Remove concept
of a schema having an associated tablespace, and simplify the rules for
selecting a default tablespace for a table or index. It's now just
(a) explicit TABLESPACE clause; (b) default_tablespace if that's not an
empty string; (c) database's default. This will allow pg_dump to use
SET commands instead of tablespace clauses to determine object locations
(but I didn't actually make it do so). All per recent discussions.
use it, as per my proposal of yesterday. This gives us a means of
determining the zone offset to impute to an unlabeled timestamp that
is both efficient and reliable, unlike all our previous tries involving
mktime() and localtime(). The behavior for invalid or ambiguous times
at a DST transition is fixed to be really and truly "assume standard
time", fixing a bug that has come and gone repeatedly but was back
again in 7.4. (There is some ongoing discussion about whether we should
raise an error instead, but for the moment I'll make it do what it was
previously intended to do.)
of HeapTupleSatisfiesItself() to trigger a hint-bit update on the tuple:
if the row was updated or deleted by a subtransaction of my own transaction
that was later rolled back. This cannot occur in pre-8.0 of course, so
the hint-bit patch applied a couple weeks ago is OK for existing releases.
But for 8.0 it seems we had better fix things so that RI_FKey_check can
pass the correct buffer number to HeapTupleSatisfiesItself. Accordingly,
add fields to the TriggerData struct to carry the buffer ID(s) for the
old and new tuple(s). There are other possible solutions but this one
seems cleanest; it will allow other AFTER-trigger functions to safely
do tqual.c calls if they want to. Put new fields at end of struct so
that there is no API breakage.
examinable by non-superusers, and use it to protect the recently-added
GUC variables for data directory and config files. For now I have only
flagged those variables that could be used to deduce something about
the server's filesystem layout, but possibly we should also mark vars
related to logging settings and other admin-only information?
at the top level of the column's old default expression before adding
an implicit coercion to the new column type. This seems to satisfy the
principle of least surprise, as per discussion of bug #1290.
to make life cushy for the JDBC driver. Centralize the decision-making
that affects this by inventing a get_type_func_class() function, rather
than adding special cases in half a dozen places.
specifies a new default tablespace and the template database already has
some tables in that tablespace. There isn't any way to solve this fully
without modifying the clone database's pg_class contents, so for now the
best we can do is issue a better error message.
just stick a list-link into struct PGnotify instead. Result is a smaller
faster and more robust library (mainly because we reduce the number of
malloc's and free's involved in notify processing), plus less pollution
of application link-symbol namespace.
pins at end of transaction, and reduce AtEOXact_Buffers to an Assert
cross-check that this was done correctly. When not USE_ASSERT_CHECKING,
AtEOXact_Buffers is a complete no-op. This gets rid of an O(NBuffers)
bottleneck during transaction commit/abort, which recent testing has shown
becomes significant above a few tens of thousands of shared buffers.
(if any) currently waited for by LockBufferForCleanup(), which is all
that we were using it for anymore. Saves some space and eliminates
proportional-to-NBuffers slowdown in UnlockBuffers().
http://archives.postgresql.org/pgsql-hackers/2004-10/msg00464.php.
This fix is intended to be permanent: it moves the responsibility for
calling SetBufferCommitInfoNeedsSave() into the tqual.c routines,
eliminating the requirement for callers to test whether t_infomask changed.
Also, tighten validity checking on buffer IDs in bufmgr.c --- several
routines were paranoid about out-of-range shared buffer numbers but not
about out-of-range local ones, which seems a tad pointless.
for scanning one term of an OR clause if the index's predicate is implied
by that same OR clause term (possibly in conjunction with top-level WHERE
clauses). Per recent example from Dawid Kuroczko,
http://archives.postgresql.org/pgsql-performance/2004-10/msg00095.php
Also, fix a very long-standing bug in index predicate testing, namely the
bizarre ordering of decomposition of predicate and restriction clauses.
AFAICS the correct way is to break down the predicate all the way, and
then for each component term see if you can prove it from the entire
restriction set. The original coding had a purely-implementation-artifact
distinction between ANDing at the top level and ANDing below that, and
proceeded to get the decomposition order wrong everywhere below the top
level, with the result that even slightly complicated AND/OR predicates
could not be proven. For instance, given
create index foop on foo(f2) where f1=42 or f1=1
or (f1 = 11 and f2 = 55);
the old code would fail to match this index to the query
select * from foo where f1 = 11 and f2 = 55;
when it obviously ought to match.
parent table's tablespace, as per gripe from Michael Kleiser. Choose
a more plausible column order for this view and pg_tables. Update
documentation of these views, which was missed in original patch.
The vars are renamed to data_directory, config_file, hba_file, and
ident_file, and are guaranteed to be set to accurate absolute paths
during postmaster startup.
This commit does not yet do anything about hiding path values from
non-superusers.
Refactor code into something reasonably understandable, cause
use of the feature to not fail in standalone backends or in
EXEC_BACKEND case, fix sloppy guc.c table entries, make the
documentation minimally usable.
columns. The returned tuple needs to have appropriate NULL columns
inserted so that it actually matches the declared rowtype. It seemed
convenient to use a JunkFilter for this, so I made some cleanups and
simplifications in the JunkFilter code to allow it to support this
additional functionality. (That in turn exposed a latent bug in
nodeAppend.c, which is that it was returning a tuple slot whose
descriptor didn't match its data.) Also, move check_sql_fn_retval
out of pg_proc.c and into functions.c, where it seems to more naturally
belong.
* Links with -leay32 and -lssleay32 instead of crypto and ssl. On win32,
"crypto and ssl" is only used for static linking.
* Initializes SSL in the backend and not just in the postmaster. We
cannot pass the SSL context from the postmaster through the parameter
file, because it contains function pointers.
* Split one error check in be-secure.c. Previously we could not tell
which of three calls actually failed. The previous code also returned
incorrect error messages if SSL_accept() failed - that function needs to
use SSL_get_error() on the return value, can't just use the error queue.
* Since the win32 implementation uses non-blocking sockets "behind the
scenes" in order to deliver signals correctly, implements a version of
SSL_accept() that can handle this. Also, add a wait function in case
SSL_read or SSL_write() needs more data.
Magnus Hagander
"make pgxs install by default". It is up to the committers to chose.
(1) there is only one "install" target. no more "install-all-headers".
it simplifies/changes several makefiles.
(2) the documentation reflects the change.
(3) a minor fix on pgxs to use a nicer patch without a double slash.
Fabien Coelho
from Sebastian Böck. The fix involves being more consistent about
when rangetable entries are copied or modified. Someday we really
need to fix this stuff to not scribble on its input data structures
in the first place...
to unreserved keyword, use ereport not elog, assign a separate error code
for 'could not obtain lock' so that applications will be able to detect
that case cleanly.
now are supposed to take some kind of lock on an index whenever you
are going to access the index contents, rather than relying only on a
lock on the parent table.
(1) Replace while loop with the new forboth() construct in
parser/analyze.c
(2) Replace lcons() with lappend() in SearchCatCacheList(). Since these
now have the same performance, there is no reason to prefer lcons() in
this case, and using lappend() leads to cleaner code.
(3) Improve the name of the second parameter to for_each_cell()
Given that PostgreSQL will output a message complaining about it's
absence if you're using SSL mode, I feel it's important that it gets a
mention in the documentation at some point.
Dominic Mitchell
pg_subtrans --- what we need is the oldest xmin of any snapshot in use
in the current top transaction. Introduce a new variable TransactionXmin
to play this role. Fixes intermittent regression failure reported by
Neil Conway.
as per recent discussions. Invent SubTransactionIds that are managed like
CommandIds (ie, counter is reset at start of each top transaction), and
use these instead of TransactionIds to keep track of subtransaction status
in those modules that need it. This means that a subtransaction does not
need an XID unless it actually inserts/modifies rows in the database.
Accordingly, don't assign it an XID nor take a lock on the XID until it
tries to do that. This saves a lot of overhead for subtransactions that
are only used for error recovery (eg plpgsql exceptions). Also, arrange
to release a subtransaction's XID lock as soon as the subtransaction
exits, in both the commit and abort cases. This avoids holding many
unique locks after a long series of subtransactions. The price is some
additional overhead in XactLockTableWait, but that seems acceptable.
Finally, restructure the state machine in xact.c to have a more orthogonal
set of states for subtransactions.
mode see a fresh snapshot for each command in the function, rather than
using the latest interactive command's snapshot. Also, suppress fresh
snapshots as well as CommandCounterIncrement inside STABLE and IMMUTABLE
functions, instead using the snapshot taken for the most closely nested
regular query. (This behavior is only sane for read-only functions, so
the patch also enforces that such functions contain only SELECT commands.)
As per my proposal of 6-Sep-2004; I note that I floated essentially the
same proposal on 19-Jun-2002, but that discussion tailed off without any
action. Since 8.0 seems like the right place to be taking possibly
nontrivial backwards compatibility hits, let's get it done now.
((Snapshot) NULL) can no longer be confused with a valid snapshot,
as per my recent suggestion. Define a macro InvalidSnapshot for 0.
Use InvalidSnapshot instead of SnapshotAny as the do-nothing special
case for heap_update and heap_delete crosschecks; this seems a little
cleaner even though the behavior is really the same.
rather than when returning to the idle loop. This makes no particular
difference for interactively-issued queries, but it makes a big difference
for queries issued within functions: trigger execution now occurs before
the calling function is allowed to proceed. This responds to numerous
complaints about nonintuitive behavior of foreign key checking, such as
http://archives.postgresql.org/pgsql-bugs/2004-09/msg00020.php, and
appears to be required by the SQL99 spec.
Also take the opportunity to simplify the data structures used for the
pending-trigger list, rename them for more clarity, and squeeze out a
bit of space.
