This feature lets user code inspect and take action on DDL events.
Whenever a ddl_command_end event trigger is installed, DDL actions
executed are saved to a list which can be inspected during execution of
a function attached to ddl_command_end.
The set-returning function pg_event_trigger_ddl_commands can be used to
list actions so captured; it returns data about the type of command
executed, as well as the affected object. This is sufficient for many
uses of this feature. For the cases where it is not, we also provide a
"command" column of a new pseudo-type pg_ddl_command, which is a
pointer to a C structure that can be accessed by C code. The struct
contains all the info necessary to completely inspect and even
reconstruct the executed command.
There is no actual deparse code here; that's expected to come later.
What we have is enough infrastructure that the deparsing can be done in
an external extension. The intention is that we will add some deparsing
code in a later release, as an in-core extension.
A new test module is included. It's probably insufficient as is, but it
should be sufficient as a starting point for a more complete and
future-proof approach.
Authors: Álvaro Herrera, with some help from Andres Freund, Ian Barwick,
Abhijit Menon-Sen.
Reviews by Andres Freund, Robert Haas, Amit Kapila, Michael Paquier,
Craig Ringer, David Steele.
Additional input from Chris Browne, Dimitri Fontaine, Stephen Frost,
Petr Jelínek, Tom Lane, Jim Nasby, Steven Singer, Pavel Stěhule.
Based on original work by Dimitri Fontaine, though I didn't use his
code.
Discussion:
https://www.postgresql.org/message-id/m2txrsdzxa.fsf@2ndQuadrant.frhttps://www.postgresql.org/message-id/20131108153322.GU5809@eldon.alvh.no-ip.orghttps://www.postgresql.org/message-id/20150215044814.GL3391@alvh.no-ip.org
INSERT acquires RowExclusiveLock during normal operation and therefore
it makes sense to allow LOCK TABLE .. ROW EXCLUSIVE MODE to be executed
by users who have INSERT rights on a table (even if they don't have
UPDATE or DELETE).
Not back-patching this as it's a behavior change which, strictly
speaking, loosens security restrictions.
Per discussion with Tom and Robert (circa 2013).
If a row that potentially violates a deferred exclusion constraint is
HOT-updated later in the same transaction, the exclusion constraint would
be reported as violated when the check finally occurs, even if the row(s)
the new row originally conflicted with have since been removed. This
happened because the wrong TID was passed to check_exclusion_constraint(),
causing the live HOT-updated row to be seen as a conflicting row rather
than recognized as the row-under-test.
Per bug #13148 from Evan Martin. It's been broken since exclusion
constraints were invented, so back-patch to all supported branches.
Analysis by Noah Misch shows that the 25% threshold set by commit
53bb309d2d is lower than any other,
similar autovac threshold. While we don't know exactly what value
will be optimal for all users, it is better to err a little on the
high side than on the low side. A higher value increases the risk
that users might exhaust the available space and start seeing errors
before autovacuum can clean things up sufficiently, but a user who
hits that problem can compensate for it by reducing
autovacuum_multixact_freeze_max_age to a value dependent on their
average multixact size. On the flip side, if the emergency cap
imposed by that patch kicks in too early, the user will experience
excessive wraparound scanning and will be unable to mitigate that
problem by configuration. The new value will hopefully reduce the
risk of such bad experiences while still providing enough headroom
to avoid multixact member exhaustion for most users.
Along the way, adjust the documentation to reflect the effects of
commit 04e6d3b877, which taught
autovacuum to run for multixact wraparound even when autovacuum
is configured off.
Commit b69bf30b9b advanced the stop point
at vacuum time, but this has subsequently been shown to be unsafe as a
result of analysis by myself and Thomas Munro and testing by Thomas
Munro. The crux of the problem is that the SLRU deletion logic may
get confused about what to remove if, at exactly the right time during
the checkpoint process, the head of the SLRU crosses what used to be
the tail.
This patch, by me, fixes the problem by advancing the stop point only
following a checkpoint. This has the additional advantage of making
the removal logic work during recovery more like the way it works during
normal running, which is probably good.
At least one of the calls to DetermineSafeOldestOffset which this patch
removes was already dead, because MultiXactAdvanceOldest is called only
during recovery and DetermineSafeOldestOffset was set up to do nothing
during recovery. That, however, is inconsistent with the principle that
recovery and normal running should work similarly, and was confusing to
boot.
Along the way, fix some comments that previous patches in this area
neglected to update. It's not clear to me whether there's any
concrete basis for the decision to use only half of the multixact ID
space, but it's neither necessary nor sufficient to prevent multixact
member wraparound, so the comments should not say otherwise.
Commit b69bf30b9b failed to take into
account the possibility that there might be no multixacts in existence
at all.
Report by Thomas Munro; patch by me.
Commit e7cb7ee145 included some design
decisions that seem pretty questionable to me, and there was quite a lot
of stuff not to like about the documentation and comments. Clean up
as follows:
* Consider foreign joins only between foreign tables on the same server,
rather than between any two foreign tables with the same underlying FDW
handler function. In most if not all cases, the FDW would simply have had
to apply the same-server restriction itself (far more expensively, both for
lack of caching and because it would be repeated for each combination of
input sub-joins), or else risk nasty bugs. Anyone who's really intent on
doing something outside this restriction can always use the
set_join_pathlist_hook.
* Rename fdw_ps_tlist/custom_ps_tlist to fdw_scan_tlist/custom_scan_tlist
to better reflect what they're for, and allow these custom scan tlists
to be used even for base relations.
* Change make_foreignscan() API to include passing the fdw_scan_tlist
value, since the FDW is required to set that. Backwards compatibility
doesn't seem like an adequate reason to expect FDWs to set it in some
ad-hoc extra step, and anyway existing FDWs can just pass NIL.
* Change the API of path-generating subroutines of add_paths_to_joinrel,
and in particular that of GetForeignJoinPaths and set_join_pathlist_hook,
so that various less-used parameters are passed in a struct rather than
as separate parameter-list entries. The objective here is to reduce the
probability that future additions to those parameter lists will result in
source-level API breaks for users of these hooks. It's possible that this
is even a small win for the core code, since most CPU architectures can't
pass more than half a dozen parameters efficiently anyway. I kept root,
joinrel, outerrel, innerrel, and jointype as separate parameters to reduce
code churn in joinpath.c --- in particular, putting jointype into the
struct would have been problematic because of the subroutines' habit of
changing their local copies of that variable.
* Avoid ad-hocery in ExecAssignScanProjectionInfo. It was probably all
right for it to know about IndexOnlyScan, but if the list is to grow
we should refactor the knowledge out to the callers.
* Restore nodeForeignscan.c's previous use of the relcache to avoid
extra GetFdwRoutine lookups for base-relation scans.
* Lots of cleanup of documentation and missed comments. Re-order some
code additions into more logical places.
The new type has the scope of whole the database cluster so it doesn't
behave the same as the existing OID alias types which have database
scope,
concerning object dependency. To avoid confusion constants of the new
type are prohibited from appearing where dependencies are made involving
it.
Also, add a note to the docs about possible MVCC violation and
optimization issues, which are general over the all reg* types.
Kyotaro Horiguchi
The head_p and tail_p pointers passed to ParseConfigFp() are actually
input/output parameters, not strictly output paramaters. This updates
the function comment to reflect that.
Per discussion with Tom.
The default behavior for GSS and SSPI authentication methods has long
been to strip the realm off of the principal, however, this is not a
secure approach in multi-realm environments and the use-case for the
parameter at all has been superseded by the regex-based mapping support
available in pg_ident.conf.
Change the default for include_realm to be '1', meaning that we do
NOT remove the realm from the principal by default. Any installations
which depend on the existing behavior will need to update their
configurations (ideally by leaving include_realm set to 1 and adding a
mapping in pg_ident.conf, but alternatively by explicitly setting
include_realm=0 prior to upgrading). Note that the mapping capability
exists in all currently supported versions of PostgreSQL and so this
change can be done today. Barring that, existing users can update their
configurations today to explicitly set include_realm=0 to ensure that
the prior behavior is maintained when they upgrade.
This needs to be noted in the release notes.
Per discussion with Magnus and Peter.
This updates pg_stat_get_activity() to build a tuplestore for its
results instead of using the old-style multiple-call method. This
simplifies the function, though that wasn't the primary motivation for
the change, which is that we may turn it into a helper function which
can filter the results (or not) much more easily.
The function and view added here provide a way to look at all settings
in postgresql.conf, any #include'd files, and postgresql.auto.conf
(which is what backs the ALTER SYSTEM command).
The information returned includes the configuration file name, line
number in that file, sequence number indicating when the parameter is
loaded (useful to see if it is later masked by another definition of the
same parameter), parameter name, and what it is set to at that point.
This information is updated on reload of the server.
This is unfiltered, privileged, information and therefore access is
restricted to superusers through the GRANT system.
Author: Sawada Masahiko, various improvements by me.
Reviewers: David Steele
The first is a pretty simple bug where a relcache entry is used after
the relation is closed. In this particular situation it does not appear
to have bad consequences unless compiled with RELCACHE_FORCE_RELEASE.
The second is that infer_arbiter_indexes() skipped indexes that aren't
yet valid according to indcheckxmin. That's not required here, because
uniqueness checks don't care about visibility according to an older
snapshot. While thats not really a bug, it makes things undesirably
non-deterministic. There is some hope that this explains a test failure
on buildfarm member jaguarundi.
Discussion: 9096.1431102730@sss.pgh.pa.us
Previously, we would archive the possible-incomplete WAL segment with its
normal filename, but that causes trouble if the server owning that timeline
is still running, and tries to archive the same segment later. It's not nice
for the standby to trip up the master's archival like that. And it's pretty
confusing, anyway, to have an incomplete segment in the archive that's
indistinguishable from a normal, complete segment.
To avoid such confusion, add a .partial suffix to the file. Or to be more
precise, make a copy of the old segment under the .partial suffix, and
archive that instead of the original file. pg_receivexlog also uses the
.partial suffix for the same purpose, to tell apart incompletely streamed
files from complete ones.
There is no automatic mechanism to use the .partial files at recovery, so
they will go unused, unless the administrator manually copies to them to
the pg_xlog directory (and removes the .partial suffix). Recovery won't
normally need the WAL - when recovering to the new timeline, it will find
the same WAL on the first segment on the new timeline instead - but it
nevertheless feels better to archive the file with the .partial suffix, for
debugging purposes if nothing else.
The logic introduced in commit b69bf30b9b
and repaired in commits 669c7d20e6 and
7be47c56af helps to ensure that we don't
overwrite old multixact member information while it is still needed,
but a user who creates many large multixacts can still exhaust the
member space (and thus start getting errors) while autovacuum stands
idly by.
To fix this, progressively ramp down the effective value (but not the
actual contents) of autovacuum_multixact_freeze_max_age as member space
utilization increases. This makes autovacuum more aggressive and also
reduces the threshold for a manual VACUUM to perform a full-table scan.
This patch leaves unsolved the problem of ensuring that emergency
autovacuums are triggered even when autovacuum=off. We'll need to fix
that via a separate patch.
Thomas Munro and Robert Haas
The newly added ON CONFLICT clause allows to specify an alternative to
raising a unique or exclusion constraint violation error when inserting.
ON CONFLICT refers to constraints that can either be specified using a
inference clause (by specifying the columns of a unique constraint) or
by naming a unique or exclusion constraint. DO NOTHING avoids the
constraint violation, without touching the pre-existing row. DO UPDATE
SET ... [WHERE ...] updates the pre-existing tuple, and has access to
both the tuple proposed for insertion and the existing tuple; the
optional WHERE clause can be used to prevent an update from being
executed. The UPDATE SET and WHERE clauses have access to the tuple
proposed for insertion using the "magic" EXCLUDED alias, and to the
pre-existing tuple using the table name or its alias.
This feature is often referred to as upsert.
This is implemented using a new infrastructure called "speculative
insertion". It is an optimistic variant of regular insertion that first
does a pre-check for existing tuples and then attempts an insert. If a
violating tuple was inserted concurrently, the speculatively inserted
tuple is deleted and a new attempt is made. If the pre-check finds a
matching tuple the alternative DO NOTHING or DO UPDATE action is taken.
If the insertion succeeds without detecting a conflict, the tuple is
deemed inserted.
To handle the possible ambiguity between the excluded alias and a table
named excluded, and for convenience with long relation names, INSERT
INTO now can alias its target table.
Bumps catversion as stored rules change.
Author: Peter Geoghegan, with significant contributions from Heikki
Linnakangas and Andres Freund. Testing infrastructure by Jeff Janes.
Reviewed-By: Heikki Linnakangas, Andres Freund, Robert Haas, Simon Riggs,
Dean Rasheed, Stephen Frost and many others.
Previously, relation range table entries used a single Bitmapset field
representing which columns required either UPDATE or INSERT privileges,
despite the fact that INSERT and UPDATE privileges are separately
cataloged, and may be independently held. As statements so far required
either insert or update privileges but never both, that was
sufficient. The required permission could be inferred from the top level
statement run.
The upcoming INSERT ... ON CONFLICT UPDATE feature needs to
independently check for both privileges in one statement though, so that
is not sufficient anymore.
Bumps catversion as stored rules change.
Author: Peter Geoghegan
Reviewed-By: Andres Freund
The minmax opclass was using the wrong support functions when
cross-datatypes queries were run. Instead of trying to fix the
pg_amproc definitions (which apparently is not possible), use the
already correct pg_amop entries instead. This requires jumping through
more hoops (read: extra syscache lookups) to obtain the underlying
functions to execute, but it is necessary for correctness.
Author: Emre Hasegeli, tweaked by Álvaro
Review: Andreas Karlsson
Also change BrinOpcInfo to record each stored type's typecache entry
instead of just the OID. Turns out that the full type cache is
necessary in brin_deform_tuple: the original code used the indexed
type's byval and typlen properties to extract the stored tuple, which is
correct in Minmax; but in other implementations that want to store
something different, that's wrong. The realization that this is a bug
comes from Emre also, but I did not use his patch.
I also adopted Emre's regression test code (with smallish changes),
which is more complete.
The old formula didn't have enough parentheses, so it would do the wrong
thing, and it used / rather than % to find a remainder. The effect of
these oversights is that the stop point chosen by the logic introduced in
commit b69bf30b9b might be rather
meaningless.
Thomas Munro, reviewed by Kevin Grittner, with a whitespace tweak by me.
This commit adds the following functions:
box(point) -> box
bound_box(box, box) -> box
inet_same_family(inet, inet) -> bool
inet_merge(inet, inet) -> cidr
range_merge(anyrange, anyrange) -> anyrange
The first of these is also used to implement a new assignment cast from
point to box.
These functions are the first part of a base to implement an "inclusion"
operator class for BRIN, for multidimensional data types.
Author: Emre Hasegeli
Reviewed by: Andreas Karlsson
pg_win32_is_junction() was a typo for pgwin32_is_junction(). open()
was used not only in a two-argument form, which breaks on Windows,
but also where BasicOpenFile() should have been used.
Per reports from Andrew Dunstan and David Rowley.
This makes the executor code more consistent. It also removes
an apparently superfluous NULL test in nodeGroup.c.
Qingqing Zhou, reviewed by Tom Lane, and further revised by me.
Otherwise, if there's another crash, some writes from after the first
crash might make it to disk while writes from before the crash fail
to make it to disk. This could lead to data corruption.
Back-patch to all supported versions.
Abhijit Menon-Sen, reviewed by Andres Freund and slightly revised
by me.
The first bug is not releasing a tupdesc when doing an early return out
of the function. The second bug is a logic error in choosing when to do
an early return if given an empty jsonb object.
Bug reports from Pavel Stehule and Tom Lane respectively.
Backpatch to 9.4 where these were introduced.
Commit ef3f9e642d suppressed one cause of warnings here, but
recent clang on OS X is still unhappy because we're passing a "long"
to abs(). The fact that tm_gmtoff is declared as long is no doubt a
hangover from days when int might be only 16 bits; but Postgres has
never been able to run on such machines, so we can just cast it to int
with no worries. For consistency, also cast to int in the other
uses of tm_gmtoff in this stanza.
Note: this code is still broken on machines that don't follow C99
integer-division-truncates-towards-zero rules. Given the lack of
complaints about it, I don't feel a large desire to complicate things
enough to cope with the pre-C99 rules.
When altering the deferredness state of a foreign key constraint, we
correctly updated the catalogs and then invalidated the relcache state for
the target relation ... but that's not the only relation with relevant
triggers. Must invalidate the other table as well, or the state change
fails to take effect promptly for operations triggered on the other table.
Per bug #13224 from Christian Ullrich.
In passing, reorganize regression test case for this feature so that it
isn't randomly injected into the middle of an unrelated test sequence.
Oversight in commit f177cbfe67. Back-patch
to 9.4 where the faulty code was added.
coerce_type() has local variables named targetTypeId, baseTypeId, and
targetType. targetType has been the Type structure for baseTypeId, so
rename it to baseType.
Tom Lane pointed out that this wasn't done, and asked whether that was
intentional. Subsequent discussion was in favor of making the change,
so here we go.
Foreign data wrappers can use this capability for so-called "join
pushdown"; that is, instead of executing two separate foreign scans
and then joining the results locally, they can generate a path which
performs the join on the remote server and then is scanned locally.
This commit does not extend postgres_fdw to take advantage of this
capability; it just provides the infrastructure.
Custom scan providers can use this in a similar way. Previously,
it was only possible for a custom scan provider to scan a single
relation. Now, it can scan an entire join tree, provided of course
that it knows how to produce the same results that the join would
have produced if executed normally.
KaiGai Kohei, reviewed by Shigeru Hanada, Ashutosh Bapat, and me.
ParseCommitRecord() accessed xl_xact_origin directly. But the chunks in
the commit record's data only have 4 byte alignment, whereas
xl_xact_origin's members require 8 byte alignment on some
platforms. Update comments to make not of that and copy the record to
stack local storage before reading.
With help from Stefan Kaltenbrunner in pinning down the buildfarm and
verifying the fix.
In commit 31eae6028e, some documents were not updated to show the new
capability; fix that. Also, the error message you get when CURRENT_USER
and SESSION_USER are used in a context that doesn't accept them could be
clearer about it being a problem only in those contexts; so add the
word "here".
Author: Kyotaro HORIGUCHI
His patch submission also included changes to GRANT/REVOKE, but those
seemed more controversial, so I left them out. We can reconsider these
changes later.
This does four basic things. First, it provides convenience routines
to coordinate the startup and shutdown of parallel workers. Second,
it synchronizes various pieces of state (e.g. GUCs, combo CID
mappings, transaction snapshot) from the parallel group leader to the
worker processes. Third, it prohibits various operations that would
result in unsafe changes to that state while parallelism is active.
Finally, it propagates events that would result in an ErrorResponse,
NoticeResponse, or NotifyResponse message being sent to the client
from the parallel workers back to the master, from which they can then
be sent on to the client.
Robert Haas, Amit Kapila, Noah Misch, Rushabh Lathia, Jeevan Chalke.
Suggestions and review from Andres Freund, Heikki Linnakangas, Noah
Misch, Simon Riggs, Euler Taveira, and Jim Nasby.
We need to create the pg_multixact/offsets file deleted by pg_upgrade
much earlier than we originally were: it was in TrimMultiXact(), which
runs after we exit recovery, but it actually needs to run earlier than
the first call to SetMultiXactIdLimit (before recovery), because that
routine already wants to read the first offset segment.
Per pg_upgrade trouble report from Jeff Janes.
While at it, silence a compiler warning about a pointless assert that an
unsigned variable was being tested non-negative. This was a signed
constant in Thomas Munro's patch which I changed to unsigned before
commit. Pointed out by Andres Freund.
When this code was written, catalog scans were normally performed using
SnapshotNow, making special handling necessary here. Now, however, all
catalog scans use MVCC snapshots, so we can change these cases to look
more like what we do for catalog scans elsewhere in the code.
Per discussion with Tom Lane and a reminder from Bruce Momjian.
When implementing a replication solution ontop of logical decoding, two
related problems exist:
* How to safely keep track of replication progress
* How to change replication behavior, based on the origin of a row;
e.g. to avoid loops in bi-directional replication setups
The solution to these problems, as implemented here, consist out of
three parts:
1) 'replication origins', which identify nodes in a replication setup.
2) 'replication progress tracking', which remembers, for each
replication origin, how far replay has progressed in a efficient and
crash safe manner.
3) The ability to filter out changes performed on the behest of a
replication origin during logical decoding; this allows complex
replication topologies. E.g. by filtering all replayed changes out.
Most of this could also be implemented in "userspace", e.g. by inserting
additional rows contain origin information, but that ends up being much
less efficient and more complicated. We don't want to require various
replication solutions to reimplement logic for this independently. The
infrastructure is intended to be generic enough to be reusable.
This infrastructure also replaces the 'nodeid' infrastructure of commit
timestamps. It is intended to provide all the former capabilities,
except that there's only 2^16 different origins; but now they integrate
with logical decoding. Additionally more functionality is accessible via
SQL. Since the commit timestamp infrastructure has also been introduced
in 9.5 (commit 73c986add) changing the API is not a problem.
For now the number of origins for which the replication progress can be
tracked simultaneously is determined by the max_replication_slots
GUC. That GUC is not a perfect match to configure this, but there
doesn't seem to be sufficient reason to introduce a separate new one.
Bumps both catversion and wal page magic.
Author: Andres Freund, with contributions from Petr Jelinek and Craig Ringer
Reviewed-By: Heikki Linnakangas, Petr Jelinek, Robert Haas, Steve Singer
Discussion: 20150216002155.GI15326@awork2.anarazel.de,
20140923182422.GA15776@alap3.anarazel.de,
20131114172632.GE7522@alap2.anarazel.de
I thought I'd gone through all of these before, but a fresh review found
this one too. (Perhaps it would be better to just delete this test and
let the failure occur later, but for the moment I'll preserve the logic.)
The case that this was rejecting is like
CREATE FOREIGN TABLE ft (f1 int ...) ...;
CREATE TABLE c1 (UNIQUE(f1)) INHERITS(ft);
This is necessary in view of the changes to allow foreign tables to be
full members of inheritance hierarchies, but I (tgl) unaccountably missed
it in commit cb1ca4d800.
Noted by Amit Langote, patch by Etsuro Fujita
Multixact member files are subject to early wraparound overflow and
removal: if the average multixact size is above a certain threshold (see
note below) the protections against offset overflow are not enough:
during multixact truncation at checkpoint time, some
pg_multixact/members files would be removed because the server considers
them to be old and not needed anymore. This leads to loss of files that
are critical to interpret existing tuples's Xmax values.
To protect against this, since we don't have enough info in pg_control
and we can't modify it in old branches, we maintain shared memory state
about the oldest value that we need to keep; we use this during new
multixact creation to abort if an old still-needed file would get
overwritten. This value is kept up to date by checkpoints, which makes
it not completely accurate but should be good enough. We start emitting
warnings sometime earlier, so that the eventual multixact-shutdown
doesn't take DBAs completely by surprise (more precisely: once 20
members SLRU segments are remaining before shutdown.)
On troublesome average multixact size: The threshold size depends on the
multixact freeze parameters. The oldest age is related to the greater of
multixact_freeze_table_age and multixact_freeze_min_age: anything
older than that should be removed promptly by autovacuum. If autovacuum
is keeping up with multixact freezing, the troublesome multixact average
size is
(2^32-1) / Max(freeze table age, freeze min age)
or around 28 members per multixact. Having an average multixact size
larger than that will eventually cause new multixact data to overwrite
the data area for older multixacts. (If autovacuum is not able to keep
up, or there are errors in vacuuming, the actual maximum is
multixact_freeeze_max_age instead, at which point multixact generation
is stopped completely. The default value for this limit is 400 million,
which means that the multixact size that would cause trouble is about 10
members).
Initial bug report by Timothy Garnett, bug #12990
Backpatch to 9.3, where the problem was introduced.
Authors: Álvaro Herrera, Thomas Munro
Reviews: Thomas Munro, Amit Kapila, Robert Haas, Kevin Grittner
Some operating systems, including the reporter's windows, return EBADFD
or similar when fsync() is invoked on a O_RDONLY file descriptor.
Unfortunately RestoreSlotFromDisk() does exactly that; which causes
failures after restarts in at least some scenarios.
If you hit the bug the error message will be something like
ERROR: could not fsync file "pg_replslot/$name/state": Bad file descriptor
Simply use O_RDWR instead of O_RDONLY when opening the relevant file
descriptor to fix the bug. Unfortunately I have no way of verifying the
fix, but we've seen similar problems in the past.
This bug goes back to 9.4 where slots were introduced. Backpatch
accordingly.
Reported-By: Patrice Drolet
Bug: #13143:
Discussion: 20150424101006.2556.60897@wrigleys.postgresql.org
The original security barrier view implementation, on which RLS is
built, prevented all non-leakproof functions from being pushed down to
below the view, even when the function was not receiving any data from
the view. This optimization improves on that situation by, instead of
checking strictly for non-leakproof functions, it checks for Vars being
passed to non-leakproof functions and allows functions which do not
accept arguments or whose arguments are not from the current query level
(eg: constants can be particularly useful) to be pushed down.
As discussed, this does mean that a function which is pushed down might
gain some idea that there are rows meeting a certain criteria based on
the number of times the function is called, but this isn't a
particularly new issue and the documentation in rules.sgml already
addressed similar covert-channel risks. That documentation is updated
to reflect that non-leakproof functions may be pushed down now, if
they meet the above-described criteria.
Author: Dean Rasheed, with a bit of rework to make things clearer,
along with comment and documentation updates from me.
Since both forms are arguably legal I wasn't sure about changing
this. But then Tom argued for 'therefore'...
Author: Dmitriy Olshevskiy
Discussion: 34789.1430067832@sss.pgh.pa.us
This provides a mechanism for specifying conversions between SQL data
types and procedural languages. As examples, there are transforms
for hstore and ltree for PL/Perl and PL/Python.
reviews by Pavel Stěhule and Andres Freund
pg_dump has historically assumed that default_with_oids affects only plain
tables and not other relkinds. Conceivably we could make it apply to some
newly invented relkind if we did so from the get-go, but changing the
behavior for existing object types will break existing dump scripts.
Add code comments warning about this interaction.
Also, make sure that default_with_oids doesn't cause parse_utilcmd.c to
think that CREATE FOREIGN TABLE will create an OID column. I think this is
only a latent bug right now, since we don't allow UNIQUE/PKEY constraints
in CREATE FOREIGN TABLE, but it's better to be consistent and future-proof.
An outer join appearing within the RHS of an antijoin can't commute with
the antijoin, but somehow I missed teaching make_outerjoininfo() about
that. In Teodor Sigaev's recent trouble report, this manifests as a
"could not find RelOptInfo for given relids" error within eqjoinsel();
but I think silently wrong query results are possible too, if the planner
misorders the joins and doesn't happen to trigger any internal consistency
checks. It's broken as far back as we had antijoins, so back-patch to all
supported branches.
The RLS capability is built on top of the WITH CHECK OPTION
system which was added for auto-updatable views, however, unlike
WCOs on views (which are mandated by the SQL spec to not fire until
after all other constraints and checks are done), it makes much more
sense for RLS checks to happen earlier than constraint and uniqueness
checks.
This patch reworks the structure which holds the WCOs a bit to be
explicitly either VIEW or RLS checks and the RLS-related checks are
done prior to the constraint and uniqueness checks. This also allows
better error reporting as we are now reporting when a violation is due
to a WITH CHECK OPTION and when it's due to an RLS policy violation,
which was independently noted by Craig Ringer as being confusing.
The documentation is also updated to include a paragraph about when RLS
WITH CHECK handling is performed, as there have been a number of
questions regarding that and the documentation was previously silent on
the matter.
Author: Dean Rasheed, with some kabitzing and comment changes by me.
The cross-reference to set_append_rel_pathlist() was obsoleted by
commit e2fa76d80b, which split what
had been set_rel_pathlist() and child routines into two sets of
functions. But I (tgl) evidently missed updating this comment.
Back-patch to 9.2 to avoid unnecessary divergence among branches.
Amit Langote
In get_row_security_policies(), we need to make a copy of the relation
name when building the WithCheckOptions structure, since
RelationGetRelationName just returns a pointer into the local Relation
structure. The relation name in the WCO structure is only used for
error reporting.
Pointed out by Robert and Christian Ullrich, who noted that the
buildfarm members with -DCLOBBER_CACHE_ALWAYS were failing.
When the startup process recovers transactions by scanning pg_twophase
directory, it should clear MyLockedGxact after it's done processing each
transaction. Like we do during normal operation, at PREPARE TRANSACTION.
Otherwise, if the startup process exits due to an error, it will try to
clear the locking_backend field of the last recovered transaction. That's
usually harmless, but if the error happens in MarkAsPreparing, while
holding TwoPhaseStateLock, the shmem-exit hook will try to acquire
TwoPhaseStateLock again, and deadlock with itself.
This fixes bug #13128 reported by Grant McAlister. The bug was introduced
by commit bb38fb0d, so backpatch to all supported versions like that
commit.
Commit a2e35b53c3 neglected to update the type OID to use further
down in DefineType when TypeShellMake was changed to return
ObjectAddress instead of OID (it got it right in DefineRange, however.)
This resulted in an internal error message being issued when looking up
I/O functions.
Author: Michael Paquier
Also add Asserts() to a couple of other places to ensure that the type
OID being used is as expected.
In prepend_row_security_policies(), defaultDeny was always true, so if
there were any hook policies, the RLS policies on the table would just
get discarded. Fixed to start off with defaultDeny as false and then
properly set later if we detect that only the default deny policy exists
for the internal policies.
The infinite recursion detection in fireRIRrules() didn't properly
manage the activeRIRs list in the case of WCOs, so it would incorrectly
report infinite recusion if the same relation with RLS appeared more
than once in the rtable, for example "UPDATE t ... FROM t ...".
Further, the RLS expansion code in fireRIRrules() was handling RLS in
the main loop through the rtable, which lead to RTEs being visited twice
if they contained sublink subqueries, which
prepend_row_security_policies() attempted to handle by exiting early if
the RTE already had securityQuals. That doesn't work, however, since
if the query involved a security barrier view on top of a table with
RLS, the RTE would already have securityQuals (from the view) by the
time fireRIRrules() was invoked, and so the table's RLS policies would
be ignored. This is fixed in fireRIRrules() by handling RLS in a
separate loop at the end, after dealing with any other sublink
subqueries, thus ensuring that each RTE is only visited once for RLS
expansion.
The inheritance planner code didn't correctly handle non-target
relations with RLS, which would get turned into subqueries during
planning. Thus an update of the form "UPDATE t1 ... FROM t2 ..." where
t1 has inheritance and t2 has RLS quals would fail. Fix by making sure
to copy in and update the securityQuals when they exist for non-target
relations.
process_policies() was adding WCOs to non-target relations, which is
unnecessary, and could lead to a lot of wasted time in the rewriter and
the planner. Fix by only adding WCO policies when working on the result
relation. Also in process_policies, we should be copying the USING
policies to the WITH CHECK policies on a per-policy basis, fix by moving
the copying up into the per-policy loop.
Lastly, as noted by Dean, we were simply adding policies returned by the
hook provided to the list of quals being AND'd, meaning that they would
actually restrict records returned and there was no option to have
internal policies and hook-based policies work together permissively (as
all internal policies currently work). Instead, explicitly add support
for both permissive and restrictive policies by having a hook for each
and combining the results appropriately. To ensure this is all done
correctly, add a new test module (test_rls_hooks) to test the various
combinations of internal, permissive, and restrictive hook policies.
Largely from Dean Rasheed (thanks!):
CAEZATCVmFUfUOwwhnBTcgi6AquyjQ0-1fyKd0T3xBWJvn+xsFA@mail.gmail.com
Author: Dean Rasheed, though I added the new hooks and test module.
As noted by Etsuro Fujita [1] and Dean Rasheed[2],
cb1ca4d800 changed ExecBuildAuxRowMark()
to always look for the tableoid in the target list, but didn't also
change preprocess_targetlist() to always include the tableoid. This
resulted in errors with soon-to-be-added RLS with inheritance tests,
and errors when using inheritance with foreign tables.
Authors: Etsuro Fujita and Dean Rasheed (independently)
Minor word-smithing on the comments by me.
[1] 552CF0B6.8010006@lab.ntt.co.jp
[2] CAEZATCVmFUfUOwwhnBTcgi6AquyjQ0-1fyKd0T3xBWJvn+xsFA@mail.gmail.com
Right now it is visible whether a replication slot is active in any
session, but not in which. Adding the active_in column, containing the
pid of the backend having acquired the slot, makes it much easier to
associate pg_replication_slots entries with the corresponding
pg_stat_replication/pg_stat_activity row.
This should have been done from the start, but I (Andres) dropped the
ball there somehow.
Author: Craig Ringer, revised by me Discussion:
CAMsr+YFKgZca5_7_ouaMWxA5PneJC9LNViPzpDHusaPhU9pA7g@mail.gmail.com
The USING policies were not being checked for differences as the same
policy was being passed in to both sides of the equal(). This could
result in backends not realizing that a policy had been changed, if
none of the other attributes had been changed.
Fix by passing to equal() the policy1 and policy2 using quals for
comparison.
No need to back-patch as this is not yet released. Noticed while
testing changes to RLS proposed by Dean Rasheed.
Logical decoding set SnapshotData's regd_count field to avoid the
snapshot manager from prematurely freeing snapshots that are generated
by the decoding system. That was always an abuse of the field, as it was
never supposed to be used outside the snapshot manager. Commit 94028691
made snapshot manager's tracking of the snapshots smarter, and that scheme
fell apart. The snapshot manager got confused and hit the assertion, when
a snapshot that was marked with regd_count==1 was not found in the heap,
where the snapshot manager tracks registered the snapshots.
To fix, don't abuse the regd_count field like that. Logical decoding still
abuses the active_count field for similar purposes, but that's currently
harmless.
The assertion failure was first reported by Michael Paquier
After the WAL format changes, the calculation of the size of a checkpoint
record became incorrect. Instead of trying to fix the math, check that the
previous record, i.e. the xl_prev value that we'd write for the next
record, matches the last checkpoint's redo pointer. That way it's not
dependent on the size of the checkpoint record at all.
The old logic was actually slightly wrong all along: if the previous
checkpoint record crossed a page boundary, the page headers threw off the
record size calculation, and the checkpoint was not skipped. The new
checkpoint would not cross a page boundary, so this only resulted in at
most one extra checkpoint after the system became idle. The new logic fixes
that. (It's not worth fixing in backbranches).
However, it makes some sense to try to keep the latest checkpoint contained
fully in a page, or at least in a single WAL segment, just on general
robustness grounds. If something goes awfully wrong, it's more likely that
you can recover the latest WAL segment, than the last two WAL segments. So
I added an extra check that the checkpoint is not skipped if the previous
checkpoint crossed a WAL segment.
Reported by Jeff Janes.
Previously, these functions were created in a schema "binary_upgrade",
which was deleted after pg_upgrade was finished. Because we don't want
to keep that schema around permanently, move them to pg_catalog but
rename them with a binary_upgrade_... prefix.
The provided functions are only small wrappers around global variables
that were added specifically for pg_upgrade use, so keeping the module
separate does not create any modularity.
The functions still check that they are only called in binary upgrade
mode, so it is not possible to call these during normal operation.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
SLRU_SEGMENTS_PER_PAGE -> SLRU_PAGES_PER_SEGMENT
I introduced this ancient typo in subtrans.c and later propagated it to
multixact.c. I fixed the latter in f741300c, but only back to 9.3;
backpatch to all supported branches for consistency.
Now that we use CRC-32C in WAL and the control file, the "traditional" and
"legacy" CRC-32 variants are not used in any frontend programs anymore.
Move the code for those back from src/common to src/backend/utils/hash.
Also move the slicing-by-8 implementation (back) to src/port. This is in
preparation for next patch that will add another implementation that uses
Intel SSE 4.2 instructions to calculate CRC-32C, where available.
After a timeline switch, we would leave behind recycled WAL segments that
are in the future, but on the old timeline. After promotion, and after they
become old enough to be recycled again, we would notice that they don't have
a .ready or .done file, create a .ready file for them, and archive them.
That's bogus, because the files contain garbage, recycled from an older
timeline (or prealloced as zeros). We shouldn't archive such files.
This could happen when we're following a timeline switch during replay, or
when we switch to new timeline at end-of-recovery.
To fix, whenever we switch to a new timeline, scan the data directory for
WAL segments on the old timeline, but with a higher segment number, and
remove them. Those don't belong to our timeline history, and are most
likely bogus recycled or preallocated files. They could also be valid files
that we streamed from the primary ahead of time, but in any case, they're
not needed to recover to the new timeline.
This view shows information about all connections, such as if the
connection is using SSL, which cipher is used, and which client
certificate (if any) is used.
Reviews by Alex Shulgin, Heikki Linnakangas, Andres Freund & Michael Paquier
Locking and updating the same tuple repeatedly led to some strange
multixacts being created which had several subtransactions of the same
parent transaction holding locks of the same strength. However,
once a subxact of the current transaction holds a lock of a given
strength, it's not necessary to acquire the same lock again. This made
some coding patterns much slower than required.
The fix is twofold. First we change HeapTupleSatisfiesUpdate to return
HeapTupleBeingUpdated for the case where the current transaction is
already a single-xid locker for the given tuple; it used to return
HeapTupleMayBeUpdated for that case. The new logic is simpler, and the
change to pgrowlocks is a testament to that: previously we needed to
check for the single-xid locker separately in a very ugly way. That
test is simpler now.
As fallout from the HTSU change, some of its callers need to be amended
so that tuple-locked-by-own-transaction is taken into account in the
BeingUpdated case rather than the MayBeUpdated case. For many of them
there is no difference; but heap_delete() and heap_update now check
explicitely and do not grab tuple lock in that case.
The HTSU change also means that routine MultiXactHasRunningRemoteMembers
introduced in commit 11ac4c73cb is no longer necessary and can be
removed; the case that used to require it is now handled naturally as
result of the changes to heap_delete and heap_update.
The second part of the fix to the performance issue is to adjust
heap_lock_tuple to avoid the slowness:
1. Previously we checked for the case that our own transaction already
held a strong enough lock and returned MayBeUpdated, but only in the
multixact case. Now we do it for the plain Xid case as well, which
saves having to LockTuple.
2. If the current transaction is the only locker of the tuple (but with
a lock not as strong as what we need; otherwise it would have been
caught in the check mentioned above), we can skip sleeping on the
multixact, and instead go straight to create an updated multixact with
the additional lock strength.
3. Most importantly, make sure that both the single-xid-locker case and
the multixact-locker case optimization are applied always. We do this
by checking both in a single place, rather than them appearing in two
separate portions of the routine -- something that is made possible by
the HeapTupleSatisfiesUpdate API change. Previously we would only check
for the single-xid case when HTSU returned MayBeUpdated, and only
checked for the multixact case when HTSU returned BeingUpdated. This
was at odds with what HTSU actually returned in one case: if our own
transaction was locker in a multixact, it returned MayBeUpdated, so the
optimization never applied. This is what led to the large multixacts in
the first place.
Per bug report #8470 by Oskari Saarenmaa.
FORCE option has been marked "obsolete" since very old version 7.4
but existed for backwards compatibility. Per discussion on pgsql-hackers,
we concluded that it's no longer worth keeping supporting the option.
When certain event-trigger-only functions are called when not in the
wrong context, they were reporting the "feature not supported" SQLSTATE,
which is somewhat misleading. Create a new custom error code for such
uses instead.
Not backpatched since it may be seen as an undesirable behavioral
change.
Author: Michael Paquier
Discussion: https://www.postgresql.org/message-id/CAB7nPqQ-5NAkHQHh_NOm7FPep37NCiLKwPoJ2Yxb8TDoGgbYYA@mail.gmail.com
It was previously possible to have the launcher re-execute its main loop
before shutting down if some other signal was received or an error
occurred after getting SIGTERM, as reported by Qingqing Zhou.
While investigating, Tom Lane further noticed that if autovacuum had
been disabled in the config file, it would misbehave by trying to start
a new worker instead of bailing out immediately -- it would consider
itself as invoked in emergency mode.
Fix both problems by checking the shutdown flag in a few more places.
These problems have existed since autovacuum was introduced, so
backpatch all the way back.
This is consistent with what the new numeric suppor for abbreviated keys
now does, and seems much more convenient than having a separate compiler
define to control this debug output.
Peter Geoghegan
Commit a2e35b53 should have removed the variable declaration in the
inner block, but didn't. As a result, the returned address might end up
not being what was intended.
It now also reports temporary objects dropped that are local to the
backend. Previously we weren't reporting any temp objects because it
was deemed unnecessary; but as it turns out, it is necessary if we want
to keep close track of DDL command execution inside one session. Temp
objects are reported as living in schema pg_temp, which works because
such a schema-qualification always refers to the temp objects of the
current session.
This was already fixed in 0d906798f, but I failed to update the
array-formatted case. This is not backpatched, since this only affects
the code path introduced by commit a676201490.
Reduce lock levels to ShareRowExclusive for the following SQL
CREATE TRIGGER (but not DROP or ALTER)
ALTER TABLE ENABLE TRIGGER
ALTER TABLE DISABLE TRIGGER
ALTER TABLE … ADD CONSTRAINT FOREIGN KEY
Original work by Simon Riggs, extracted and refreshed by Andreas Karlsson
New test cases added by Andreas Karlsson
Reviewed by Noah Misch, Andres Freund, Michael Paquier and Simon Riggs
Previously we would re-use input subexpressions in all expression trees
attached to a Join plan node. However, if it's an outer join and the
subexpression appears in the nullable-side input, this is potentially
incorrect for apparently-matching subexpressions that came from above
the outer join (ie, targetlist and qpqual expressions), because the
executor will treat the subexpression value as NULL when maybe it should
not be.
The case is fairly hard to hit because (a) you need a non-strict
subexpression (else NULL is correct), and (b) we don't usually compute
expressions in the outputs of non-toplevel plan nodes. But we might do
so if the expressions are sort keys for a mergejoin, for example.
Probably in the long run we should make a more explicit distinction between
Vars appearing above and below an outer join, but that will be a major
planner redesign and not at all back-patchable. For the moment, just hack
set_join_references so that it will not match any non-Var expressions
coming from nullable inputs to expressions that came from above the join.
(This is somewhat overkill, in that a strict expression could still be
matched, but it doesn't seem worth the effort to check that.)
Per report from Qingqing Zhou. The added regression test case is based
on his example.
This has been broken for a very long time, so back-patch to all active
branches.
When committing abd94bcac4, I tried to make
it decide what kind of abbreviation to use based only on SIZEOF_DATUM,
without regard to USE_FLOAT8_BYVAL. That attempt was a few bricks short
of a load, so try to fix it, and add a comment explaining what we're
about.
Patch by me; review (but not a full endorsement) by Andrew Gierth.
Peter Eisentraut
Alvaro Herrera
Stephen Frost
Tom Lane
Robert Haas
Andrew Dunstan
Andres Freund
Heikki Linnakangas
Magnus Hagander
Noah Misch
Bruce Momjian
Fujii Masao
Simon Riggs