Commit 4d0e994eed added support for partial TOAST decompression, so the
decompression is interrupted after producing the requested prefix. For
prefix and slices near the beginning of the entry, this may saves a lot
of decompression work.
That however only deals with decompression - the whole compressed entry
was still fetched and re-assembled, even though the compression used
only a small fraction of it. This commit improves that by computing how
much compressed data may be needed to decompress the requested prefix,
and then fetches only the necessary part.
We always need to fetch a bit more compressed data than the requested
(uncompressed) prefix, because the prefix may not be compressible at all
and pglz itself adds a bit of overhead. That means this optimization is
most effective when the requested prefix is much smaller than the whole
compressed entry.
Author: Binguo Bao
Reviewed-by: Andrey Borodin, Tomas Vondra, Paul Ramsey
Discussion: https://www.postgresql.org/message-id/flat/CAL-OGkthU9Gs7TZchf5OWaL-Gsi=hXqufTxKv9qpNG73d5na_g@mail.gmail.com
Several buildfarm machines have been complaining about the new module
test_session_hooks to be unstable, like crake and thorntail. The issue
was that the module was trying to log some start and end session
activity for parallel workers, which makes little sense as they don't
support DML, so just prevent this pattern to happen in the module.
This could be reproduced by enforcing force_parallel_mode=regress, which
is the value used by some of the buildfarm members.
Discussion: https://postgr.es/m/20191001045246.GF2781@paquier.xyz
These hooks can be used in loadable modules. A simple test module is
included.
The first attempt was done with cd8ce3a but we lacked handling for
NO_INSTALLCHECK in the MSVC scripts (problem solved afterwards by
431f1599) so the buildfarm got angry. This also fixes a couple of
issues noticed upon review compared to the first attempt, so the code
has slightly changed, resulting in a more simple test module.
Author: Fabrízio de Royes Mello, Yugo Nagata
Reviewed-by: Andrew Dunstan, Michael Paquier, Aleksandr Parfenov
Discussion: https://postgr.es/m/20170720204733.40f2b7eb.nagata@sraoss.co.jp
Discussion: https://postgr.es/m/20190823042602.GB5275@paquier.xyz
When using a client compiled without channel binding support (linking to
OpenSSL 1.0.1 or older) to connect to a server which supports channel
binding (linking to OpenSSL 1.0.2 or newer), libpq would generate a
confusing error message with channel_binding=require for an SSL
connection, where the server sends back SCRAM-SHA-256-PLUS:
"channel binding is required, but server did not offer an authentication
method that supports channel binding."
This is confusing because the server did send a SASL mechanism able to
support channel binding, but libpq was not able to detect that
properly.
The situation can be summarized as followed for the case described in
the previous paragraph for the SASL mechanisms used with the various
modes of channel_binding:
1) Client supports channel binding.
1-1) channel_binding = disable => OK, with SCRAM-SHA-256.
1-2) channel_binding = prefer => OK, with SCRAM-SHA-256-PLUS.
1-3) channel_binding = require => OK, with SCRAM-SHA-256-PLUS.
2) Client does not support channel binding.
2-1) channel_binding = disable => OK, with SCRAM-SHA-256.
2-2) channel_binding = prefer => OK, with SCRAM-SHA-256.
2-3) channel_binding = require => failure with new error message,
instead of the confusing one.
This commit updates case 2-3 to generate a better error message. Note
that the SSL TAP tests are not impacted as it is not possible to test
with mixed versions of OpenSSL for the backend and libpq.
Reported-by: Tom Lane
Author: Michael Paquier
Reviewed-by: Jeff Davis, Tom Lane
Discussion: https://postgr.es/m/24857.1569775891@sss.pgh.pa.us
Adds accounting of memory allocated in a memory context. Compared to
various ad hoc solutions, the main advantage is that the accounting is
transparent and does not require direct control over allocations (this
matters for use cases where the allocations happen in user code, like
for example aggregate states allocated in a transition functions).
To reduce overhead, the accounting happens at the block level (not for
individual chunks) and only the context immediately owning the block is
updated. When inquiring about amount of memory allocated in a context,
we have to recursively walk all children contexts.
This "lazy" accounting works well for cases with relatively small number
of contexts in the relevant subtree and/or with infrequent inquiries.
Author: Jeff Davis
Reivewed-by: Tomas Vondra, Melanie Plageman, Soumyadeep Chakraborty
Discussion: https://www.postgresql.org/message-id/flat/027a129b8525601c6a680d27ce3a7172dab61aab.camel@j-davis.com
That avoids unnecessary work during both interpreted execution, and
JIT compiled expression evaluation. Both benefit from fewer expression
steps needing be processed, and for interpreted execution there now is
a fastpath dedicated to just fetching a value from a virtual
slot. That's e.g. beneficial for hashjoins over nodes that perform
projections, as the hashed columns are currently fetched individually.
Author: Soumyadeep Chakraborty, Andres Freund
Discussion: https://postgr.es/m/CAE-ML+9OKSN71+mHtfMD-L24oDp8dGTfaVjDU6U+j+FNAW5kRQ@mail.gmail.com
This file had a very weird mix of tests that did "set plan_cache_mode =
force_generic_plan" to get a generic plan, and tests that relied on
using five dummy executions of a prepared statement. Converting them
all to rely on plan_cache_mode is more consistent and shaves off a
noticeable fraction of the test script's runtime.
Discussion: https://postgr.es/m/11952.1569536725@sss.pgh.pa.us
When compiling Postgres with OpenSSL 1.0.1 or older versions, SCRAM's
channel binding cannot be supported as X509_get_signature_nid() is
needed, which causes a regression test with channel_binding='require' to
fail as the server cannot publish SCRAM-SHA-256-PLUS as SASL mechanism
over an SSL connection.
Fix the issue by using a method similar to c3d41cc, making the test
result conditional. The test passes if X509_get_signature_nid() is
present, and when missing we test for a connection failure. Testing a
connection failure is more useful than skipping the test as we should
fail the connection if channel binding is required by the client but the
server does not support it.
Reported-by: Tom Lane, Michael Paquier
Author: Michael Paquier
Discussion: https://postgr.es/m/20190927024457.GA8485@paquier.xyz
Discussion: https://postgr.es/m/24857.1569775891@sss.pgh.pa.us
In v11 or before, recovery target settings could not take effect in
crash recovery because they are specified in recovery.conf and
crash recovery always starts without recovery.conf. But commit
2dedf4d9a8 integrated recovery.conf into postgresql.conf and
which unexpectedly allowed recovery target settings to take effect
even in crash recovery. This is definitely not good behavior.
To fix the issue, this commit makes crash recovery always ignore
recovery target settings.
Back-patch to v12.
Author: Peter Eisentraut
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/e445616d-023e-a268-8aa1-67b8b335340c@pgmasters.net
In the course of 5567d12ce0, 356687bd8 and 317ffdfeaa, I changed
BuildTupleHashTable[Ext]'s call to ExecBuildGroupingEqual to not pass
in the parent node, but NULL. Which in turn prevents the tuple
equality comparator from being JIT compiled. While that fixes
bug #15486, it is not actually necessary after all of the above commits,
as we don't re-build the comparator when using the new
BuildTupleHashTableExt() interface (as the content of the hashtable
are reset, but the TupleHashTable itself is not).
Therefore re-allow jit compilation for callers that use
BuildTupleHashTableExt with a separate context for "metadata" and
content.
As in the previous commit, there's ongoing work to make this easier to
test to prevent such regressions in the future, but that
infrastructure is not going to be backpatchable.
The performance impact of not JIT compiling hashtable equality
comparators can be substantial e.g. for aggregation queries that
aggregate a lot of input rows to few output rows (when there are a lot
of output groups, there will be fewer comparisons).
Author: Andres Freund
Discussion: https://postgr.es/m/20190927072053.njf6prdl3vb7y7qb@alap3.anarazel.de
Backpatch: 11, just as 5567d12ce0
For many queries the fact that the tuple descriptor from the lower
node was not taken into account when determining whether the type of a
slot is fixed, lead to tuple deforming for such upper nodes not to be
JIT accelerated.
I broke this in 675af5c01e.
There is ongoing work to enable writing regression tests for related
behavior (including a patch that would have detected this
regression), by optionally showing such details in EXPLAIN. But as it
seems unlikely that that will be suitable for stable branches, just
merge the fix for now.
While it's fairly close to the 12 release window, the fact that 11
continues to perform JITed tuple deforming in these cases, that
there's still cases where we do so in 12, and the fact that the
performance regression can be sizable, weigh in favor of fixing it
now.
Author: Andres Freund
Discussion: https://postgr.es/m/20190927072053.njf6prdl3vb7y7qb@alap3.anarazel.de
Backpatch: 12-, where 675af5c01e was merged.
Windows does not enforce key file permissions checks in libpq, and psql
can produce CRLF line endings on Windows.
Backpatch to Release 12 (CRLF) and Release 11 (permissions check)
Coverity pointed out that it's pretty silly to check for a null pointer
after we've already dereferenced the pointer. To fix, just swap the
order of the two error checks. Oversight in commit d6e612f83.
Some older OpenSSL versions (0.9.8 branch) define TLS*_VERSION macros
but not the corresponding SSL_OP_NO_* macro, which causes the code for
handling ssl_min_protocol_version/ssl_max_protocol_version to fail to
compile. To fix, add more #ifdefs and error handling.
Reported-by: Victor Wagner <vitus@wagner.pp.ru>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/20190924101859.09383b4f%40fafnir.local.vm
This test already knew that, to get stable test output, it had to hide
"loops" counts in EXPLAIN ANALYZE results. But that's not nearly enough:
if we get a smaller number of workers than we planned for, then the
"Workers Launched" number will change, and so will all the rows and loops
counts up to the Gather node. This has resulted in repeated failures in
the buildfarm, so adjust the test to filter out all these counts.
(Really, we wouldn't bother with EXPLAIN ANALYZE at all here, except
that currently the only way to verify that executor-time pruning has
happened is to look for '(never executed)' annotations. Those are
stable and needn't be filtered out.)
Back-patch to v11 where the test was introduced.
Discussion: https://postgr.es/m/11952.1569536725@sss.pgh.pa.us
HEAD supports OpenSSL 0.9.8 and newer versions, and this code likely got
forgotten as its surrounding comments mention an incorrect version
number.
Author: Michael Paquier
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/20190927032311.GB8485@paquier.xyz
For the most part, we leave libpq-controlling environment variables
alone during "make installcheck", reasoning that connecting to the
server the user expects us to connect to may depend on those variables.
But that argument doesn't apply to PGDATABASE, since we always want
to connect to a specific database name within the server. And failing
to unset it causes certain ECPG tests to fail, as various people have
complained of in the past. So let's unset it.
Possibly this should be back-patched, but I'm disinclined to do that
right before 12.0 release. Maybe later.
Discussion: https://postgr.es/m/20180318205548.2akxjqvo7hrk5wbc@alap3.anarazel.de
Discussion: https://postgr.es/m/E1bOum4-0002EA-2y@gemulon.postgresql.org
If we don't do this, the rewind fails if the server wasn't cleanly shut
down, which seems unhelpful serving no purpose.
Also provide a new option --no-ensure-shutdown to suppress this
behavior, for alleged advanced usage that prefers to avoid the crash
recovery.
Authors: Paul Guo, Jimmy Yih, Ashwin Agrawal
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/CAEET0ZEffUkXc48pg2iqARQgGRYDiiVxDu+yYek_bTwJF+q=Uw@mail.gmail.com
For some reason at least gcc-9 warns about the fallthrough, even
though it otherwise recognizes that elog(ERROR, ...) doesn't return.
Author: Andres Freund
We've noted certain EXPLAIN queries on these tables occasionally showing
unexpected plan choices. This seems to happen because VACUUM sometimes
fails to update relpages/reltuples for one of these single-page tables,
due to bgwriter or checkpointer holding a pin on the lone page at just
the wrong time. To ensure those values get set, insert explicit ANALYZE
operations on these tables after we finish populating them. This
doesn't seem to affect any other test cases, so it's a usable fix.
Back-patch to v12. In principle the issue exists further back, but
we have not seen it before v12, so I won't risk back-patching further.
Discussion: https://postgr.es/m/24480.1569518042@sss.pgh.pa.us
This removes the last of the temporary debugging queries added to the
regression tests by commit f03a9ca43. We've pretty much convinced
ourselves that the plan instability we were seeing is due to VACUUM
sometimes failing to update relpages/reltuples for a single-page table,
due to bgwriter or checkpointer holding a pin on that page at just the
wrong time. I'll push a workaround for that separately.
Discussion: https://postgr.es/m/CA+hUKG+0CxrKRWRMf5ymN3gm+BECHna2B-q1w8onKBep4HasUw@mail.gmail.com
The test name and the following test cases suggest the index created
should be hash index, but it forgot to add 'using hash' in the test case.
This in itself won't improve code coverage as there were some other tests
which were covering the corresponding code. However, it is better if the
added tests serve their actual purpose.
Reported-by: Paul A Jungwirth
Author: Paul A Jungwirth
Reviewed-by: Mahendra Singh
Backpatch-through: 9.4
Discussion: https://postgr.es/m/CA+renyV=Us-5XfMC25bNp-uWSj39XgHHmGE9Rh2cQKMegSj52g@mail.gmail.com
The code was enforcing AccessExclusiveLock for all custom relation
options, which is incorrect as the APIs allow a custom lock level to be
set.
While on it, fix a couple of inconsistencies in the tests and the README
of dummy_index_am.
Oversights in commit 773df88.
Discussion: https://postgr.es/m/20190925234152.GA2115@paquier.xyz
LIKE INCLUDING DEFAULTS tried to copy the attrdef expression without
copying the state of the attgenerated column. This is in fact wrong,
because GENERATED and DEFAULT expressions are not the same kind of animal;
one can contain Vars and the other not. We *must* copy attgenerated
when we're copying the attrdef expression. Rearrange the if-tests
so that the expression is copied only when the correct one of
INCLUDING DEFAULTS and INCLUDING GENERATED has been specified.
Per private report from Manuel Rigger.
Tom Lane and Peter Eisentraut
This commit implements jsonpath .datetime() method as it's specified in
SQL/JSON standard. There are no-argument and single-argument versions of
this method. No-argument version selects first of ISO datetime formats
matching input string. Single-argument version accepts template string as
its argument.
Additionally to .datetime() method itself this commit also implements
comparison ability of resulting date and time values. There is some difficulty
because exising jsonb_path_*() functions are immutable, while comparison of
timezoned and non-timezoned types involves current timezone. At first, current
timezone could be changes in session. Moreover, timezones themselves are not
immutable and could be updated. This is why we let existing immutable functions
throw errors on such non-immutable comparison. In the same time this commit
provides jsonb_path_*_tz() functions which are stable and support operations
involving timezones. As new functions are added to the system catalog,
catversion is bumped.
Support of .datetime() method was the only blocker prevents T832 from being
marked as supported. sql_features.txt is updated correspondingly.
Extracted from original patch by Nikita Glukhov, Teodor Sigaev, Oleg Bartunov.
Heavily revised by me. Comments were adjusted by Liudmila Mantrova.
Discussion: https://postgr.es/m/fcc6fc6a-b497-f39a-923d-aa34d0c588e8%402ndQuadrant.com
Discussion: https://postgr.es/m/CAPpHfdsZgYEra_PeCLGNoXOWYx6iU-S3wF8aX0ObQUcZU%2B4XTw%40mail.gmail.com
Author: Alexander Korotkov, Nikita Glukhov, Teodor Sigaev, Oleg Bartunov, Liudmila Mantrova
Reviewed-by: Anastasia Lubennikova, Peter Eisentraut
SQL/JSON standard allows manipulation with datetime values. So, it appears to
be convinient to allow datetime values to be represented in JsonbValue struct.
These datetime values are allowed for temporary representation only. During
serialization datetime values are converted into strings.
SQL/JSON requires writing timestamps with timezone in the same timezone offset
as they were parsed. This is why we allow storage of timezone offset in
JsonbValue struct. For the same reason timezone offset argument is added to
JsonEncodeDateTime() function.
Extracted from original patch by Nikita Glukhov, Teodor Sigaev, Oleg Bartunov.
Revised by me. Comments were adjusted by Liudmila Mantrova.
Discussion: https://postgr.es/m/fcc6fc6a-b497-f39a-923d-aa34d0c588e8%402ndQuadrant.com
Discussion: https://postgr.es/m/CAPpHfdsZgYEra_PeCLGNoXOWYx6iU-S3wF8aX0ObQUcZU%2B4XTw%40mail.gmail.com
Author: Nikita Glukhov, Teodor Sigaev, Oleg Bartunov, Alexander Korotkov, Liudmila Mantrova
Reviewed-by: Anastasia Lubennikova, Peter Eisentraut
Add support of error suppression in some date and time manipulation functions
as it's required for jsonpath .datetime() method support. This commit doesn't
use PG_TRY()/PG_CATCH() in order to implement that. Instead, it provides
internal versions of date and time functions used, which support error
suppression.
Discussion: https://postgr.es/m/CAPpHfdsZgYEra_PeCLGNoXOWYx6iU-S3wF8aX0ObQUcZU%2B4XTw%40mail.gmail.com
Author: Alexander Korotkov, Nikita Glukhov
Reviewed-by: Anastasia Lubennikova, Peter Eisentraut
This commit adds parse_datetime() function, which implements datetime
parsing with extended features demanded by upcoming jsonpath .datetime()
method:
* Dynamic type identification based on template string,
* Support for standard-conforming 'strict' mode,
* Timezone offset is returned as separate value.
Extracted from original patch by Nikita Glukhov, Teodor Sigaev, Oleg Bartunov.
Revised by me.
Discussion: https://postgr.es/m/fcc6fc6a-b497-f39a-923d-aa34d0c588e8%402ndQuadrant.com
Discussion: https://postgr.es/m/CAPpHfdsZgYEra_PeCLGNoXOWYx6iU-S3wF8aX0ObQUcZU%2B4XTw%40mail.gmail.com
Author: Nikita Glukhov, Teodor Sigaev, Oleg Bartunov, Alexander Korotkov
Reviewed-by: Anastasia Lubennikova, Peter Eisentraut
SQL Standard 2016 defines rules for handling separators in datetime template
strings, which are different to to_date()/to_timestamp() rules. Standard
allows only small set of separators and requires strict matching for them.
Standard applies to jsonpath .datetime() method and CAST (... FORMAT ...) SQL
clause. We're not going to change handling of separators in existing
to_date()/to_timestamp() functions, because their current behavior is familiar
for users. Standard behavior now available by special flag, which will be used
in upcoming .datetime() jsonpath method.
Discussion: https://postgr.es/m/CAPpHfdsZgYEra_PeCLGNoXOWYx6iU-S3wF8aX0ObQUcZU%2B4XTw%40mail.gmail.com
Author: Alexander Korotkov
All our current in core relation options of type string (not many,
admittedly) behave in reality like enums. But after seeing an
implementation for enum reloptions, it's clear that strings are messier,
so introduce the new reloption type. Switch all string options to be
enums instead.
Fortunately we have a recently introduced test module for reloptions, so
we don't lose coverage of string reloptions, which may still be used by
third-party modules.
Authors: Nikolay Shaplov, Álvaro Herrera
Reviewed-by: Nikita Glukhov, Aleksandr Parfenov
Discussion: https://postgr.es/m/43332102.S2V5pIjXRx@x200m
Several buildfarm members (crake, loach and spurfowl) are complaining
about two queries looking up at pg_class.reloptions which trigger the
validation routines for string reloptions with default values. This
commit limits the routines to be triggered only when building an index
with all custom options set in CREATE INDEX, which is sufficient for the
coverage.
Introduced by 640c198.
This includes more tests dedicated to relation options, bringing the
coverage of this code close to 100%, and the module can be used for
other purposes, like a base template for an index AM implementation.
Author: Nikolay Sharplov, Michael Paquier
Reviewed-by: Álvaro Herrera, Dent John
Discussion: https://postgr.es/m/17071942.m9zZutALE6@x200m
Relation options can define a lock mode other than AccessExclusiveMode
since 47167b7, but modules defining custom relation options did not
really have a way to enforce that. Correct that by extending the
current API set so as modules can define a custom lock mode.
Author: Michael Paquier
Reviewed-by: Kuntal Ghosh
Discussion: https://postgr.es/m/20190920013831.GD1844@paquier.xyz
In-core relation options can use a custom lock mode since 47167b7, that
has lowered the lock available for some autovacuum parameters. However
it forgot to consider custom relation options. This causes failures
with ALTER TABLE SET when changing a custom relation option, as its lock
is not defined. The existing APIs to define a custom reloption does not
allow to define a custom lock mode, so enforce its initialization to
AccessExclusiveMode which should be safe enough in all cases. An
upcoming patch will extend the existing APIs to allow a custom lock mode
to be defined.
The problem can be reproduced with bloom indexes, so add a test there.
Reported-by: Nikolay Sharplov
Analyzed-by: Thomas Munro, Michael Paquier
Author: Michael Paquier
Reviewed-by: Kuntal Ghosh
Discussion: https://postgr.es/m/20190920013831.GD1844@paquier.xyz
Backpatch-through: 9.6
The state-tracking of WAL reading in various places was pretty messy,
mostly because the ancient physical-replication WAL reading code wasn't
using the XLogReader abstraction. This led to some untidy code. Make
it prettier by creating two additional supporting structs,
WALSegmentContext and WALOpenSegment which keep track of WAL-reading
state. This makes code cleaner, as well as supports more future
cleanup.
Author: Antonin Houska
Reviewed-by: Álvaro Herrera and (older versions) Robert Haas
Discussion: https://postgr.es/m/14984.1554998742@spoje.net
Fix an oversight in commit 7266d0997: as it stood, the code failed
when a function-in-FROM returns composite and can be simplified
to a composite constant.
For the moment, just test for composite result and abandon pullup
if we see one. To make it actually work, we'd have to decompose
the composite constant into per-column constants; which is surely
do-able, but I'm not convinced it's worth the code space.
Per report from Raúl Marín Rodríguez.
Discussion: https://postgr.es/m/CAM6_UM4isP+buRA5sWodO_MUEgutms-KDfnkwGmryc5DGj9XuQ@mail.gmail.com
When a relation is truncated, shared_buffers needs to be scanned
so that any buffers for the relation forks are invalidated in it.
Previously, shared_buffers was scanned for each relation forks, i.e.,
MAIN, FSM and VM, when VACUUM truncated off any empty pages
at the end of relation or TRUNCATE truncated the relation in place.
Since shared_buffers needed to be scanned multiple times,
it could take a long time to finish those commands especially
when shared_buffers was large.
This commit changes the logic so that shared_buffers is scanned only
one time for those three relation forks.
Author: Kirk Jamison
Reviewed-by: Masahiko Sawada, Thomas Munro, Alvaro Herrera, Takayuki Tsunakawa and Fujii Masao
Discussion: https://postgr.es/m/D09B13F772D2274BB348A310EE3027C64E2067@g01jpexmbkw24
If the bitstring length is not a multiple of 8, we'd shift the
rightmost bits into the pad space, which must be zeroes --- bit_cmp,
for one, depends on that. This'd lead to the result failing to
compare equal to what it should compare equal to, as reported in
bug #16013 from Daryl Waycott.
This is, if memory serves, not the first such bug in the bitstring
functions. In hopes of making it the last one, do a bit more work
than minimally necessary to fix the bug:
* Add assertion checks to bit_out() and varbit_out() to complain if
they are given incorrectly-padded input. This will improve the
odds that manual testing of any new patch finds problems.
* Encapsulate the padding-related logic in macros to make it
easier to use.
Also, remove unnecessary padding logic from bit_or() and bitxor().
Somebody had already noted that we need not re-pad the result of
bit_and() since the inputs are required to be the same length,
but failed to extrapolate that to the other two.
Also, move a comment block that once was near the head of varbit.c
(but people kept putting other stuff in front of it), to put it in
the header block.
Note for the release notes: if anyone has inconsistent data as a
result of saving the output of bitshiftright() in a table, it's
possible to fix it with something like
UPDATE mytab SET bitcol = ~(~bitcol) WHERE bitcol != ~(~bitcol);
This has been broken since day one, so back-patch to all supported
branches.
Discussion: https://postgr.es/m/16013-c2765b6996aacae9@postgresql.org
The code used the destination slot's natts where it intended to
use the source slot's natts. Adding an Assert shows that there
is no case in "make check-world" where these counts are different,
so maybe this is a harmless bug, but it's still a bug.
Takayuki Tsunakawa
Discussion: https://postgr.es/m/0A3221C70F24FB45833433255569204D1FD34C0E@G01JPEXMBYT05
Move the responsibility for advancing the NOTIFY queue tail pointer
from the listener(s) to the notification sender, and only have the
sender do it once every few queue pages, rather than after every batch
of notifications as at present. This reduces the number of times we
execute asyncQueueAdvanceTail, and reduces contention when there are
multiple listeners (since that function requires exclusive lock).
This change relies on the observation that we don't really need the tail
pointer to be exactly up-to-date. It's certainly not necessary to
attempt to release disk space more often than once per SLRU segment.
The only other usage of the tail pointer is that an incoming listener,
if it's the only listener in its database, will need to scan the queue
forward from the tail; but that's surely a less performance-critical
path than routine sending and receiving of notifies. We compromise by
advancing the tail pointer after every 4 pages of output, so that it
shouldn't get more than a few pages behind.
Also, when sending signals to other backends after adding notify
message(s) to the queue, recognize that only backends in our own
database are going to care about those messages, so only such
backends really need to be awakened promptly. Backends in other
databases should get kicked if they're well behind on reading the
queue, else they'll hold back the global tail pointer; but wakening
them for every single message is pointless. This change can
substantially reduce signal traffic if listeners are spread among
many databases. It won't help for the common case of only a single
active database, but the extra check costs very little.
Martijn van Oosterhout, with some adjustments by me
Discussion: https://postgr.es/m/CADWG95vtRBFDdrx1JdT1_9nhOFw48KaeTev6F_LtDQAFVpSPhA@mail.gmail.com
Discussion: https://postgr.es/m/CADWG95uFj8rLM52Er80JnhRsTbb_AqPP1ANHS8XQRGbqLrU+jA@mail.gmail.com
Since we introduced the idea of leakproof functions, texteq and textne
were marked leakproof but their sibling text comparison functions were
not. This inconsistency seemed justified because texteq/textne just
relied on memcmp() and so could easily be seen to be leakproof, while
the other comparison functions are far more complex and indeed can
throw input-dependent errors.
However, that argument crashed and burned with the addition of
nondeterministic collations, because now texteq/textne may invoke
the exact same varstr_cmp() infrastructure as the rest. It makes no
sense whatever to give them different leakproofness markings.
After a certain amount of angst we've concluded that it's all right
to consider varstr_cmp() to be leakproof, mostly because the other
choice would be disastrous for performance of many queries where
leakproofness matters. The input-dependent errors should only be
reachable for corrupt input data, or so we hope anyway; certainly,
if they are reachable in practice, we've got problems with requirements
as basic as maintaining a btree index on a text column.
Hence, run around to all the SQL functions that derive from varstr_cmp()
and mark them leakproof. This should result in a useful gain in
flexibility/performance for queries in which non-leakproofness degrades
the efficiency of the query plan.
Back-patch to v12 where nondeterministic collations were added.
While this isn't an essential bug fix given the determination
that varstr_cmp() is leakproof, we might as well apply it now that
we've been forced into a post-beta4 catversion bump.
Discussion: https://postgr.es/m/31481.1568303470@sss.pgh.pa.us
text_pattern_ops and its siblings can't be used with nondeterministic
collations, because they use the text_eq operator which will not behave
as bitwise equality if applied with a nondeterministic collation. The
initial implementation of that restriction was to insert a run-time test
in the related comparison functions, but that is inefficient, may throw
misleading errors, and will throw errors in some cases that would work.
It seems sufficient to just prevent the combination during CREATE INDEX,
so do that instead.
Lacking any better way to identify the opclasses involved, we need to
hard-wire tests for them, which requires hand-assigned values for their
OIDs, which forces a catversion bump because they previously had OIDs
that would be assigned automatically. That's slightly annoying in the
v12 branch, but fortunately we're not at rc1 yet, so just do it.
Back-patch to v12 where nondeterministic collations were added.
In passing, run make reformat-dat-files, which found some unrelated
whitespace issues (slightly different ones in HEAD and v12).
Peter Eisentraut, with small corrections by me
Discussion: https://postgr.es/m/22566.1568675619@sss.pgh.pa.us
DST law changes in Fiji and Norfolk Island. Historical corrections
for Alberta, Austria, Belgium, British Columbia, Cambodia, Hong Kong,
Indiana (Perry County), Kaliningrad, Kentucky, Michigan, Norfolk
Island, South Korea, and Turkey.
The new function stashes its output value in a JsonbValue that can be
passed in by the caller, which enables some of them to pass
stack-allocated structs -- saving palloc cycles. It also allows some
callers that know they are handling a jsonb object to use this new jsonb
object-specific API, instead of going through generic container
findJsonbValueFromContainer.
Author: Nikita Glukhov
Discussion: https://postgr.es/m/7c417f90-f95f-247e-ba63-d95e39c0ad14@postgrespro.ru
Instead of creating an iterator object at each step down the JSONB
object/array, we can just just examine its object/array flags, which is
faster. Also, use the recently introduced JsonbValueAsText instead of
open-coding the same thing, for code simplicity.
Author: Nikita Glukhov
Discussion: https://postgr.es/m/7c417f90-f95f-247e-ba63-d95e39c0ad14@postgrespro.ru
jsonb_object_field_text and jsonb_array_element_text both contained
identical copies of this code, so extract that into new routine
JsonbValueAsText. This can also be used in other places, to measurable
performance benefit: the jsonb_each() and jsonb_array_elements()
functions can use it for outputting text forms instead of their less
efficient current implementation (because we no longer need to build
intermediate a jsonb representation of each value).
Author: Nikita Glukhov
Discussion: https://postgr.es/m/7c417f90-f95f-247e-ba63-d95e39c0ad14@postgrespro.ru
Although the SQL/JSON tech report makes reference to ECMAScript which
allows both single- and double-quoted strings, all the rest of the
report speaks only of double-quoted string literals in jsonpaths.
That's more compatible with JSON itself; moreover single-quoted strings
are hard to use inside a jsonpath that is itself a single-quoted SQL
literal. So guess that the intent is to allow only double-quoted
literals, and remove lexer support for single-quoted literals.
It'll be less painful to add this again later if we're wrong, than to
remove a shipped feature.
Also, adjust the lexer so that unrecognized backslash sequences are
treated as just meaning the escaped character, not as errors. This
change has much better support in the standards, as JSON, JavaScript
and ECMAScript all make it plain that that's what's supposed to
happen.
Back-patch to v12.
Discussion: https://postgr.es/m/CAPpHfdvDci4iqNF9fhRkTqhe-5_8HmzeLt56drH%2B_Rv2rNRqfg@mail.gmail.com
This reverts commit bd7c95f0c1,
along with assorted follow-on fixes. There are some questions
about the definition and implementation of that statement, and
we don't have time to resolve them before v13 release. Rather
than ship the feature and then have backwards-compatibility
concerns constraining any redesign, let's remove it for now
and try again later.
Discussion: https://postgr.es/m/TY2PR01MB2443EC8286995378AEB7D9F8F5B10@TY2PR01MB2443.jpnprd01.prod.outlook.com
f5f084fc3e has removed test because of its instability. This commit provides
alternative test with determined ordering using extra ORDER BY expression.
Backpatch-through: 12
6cae9d2c10 introduced test for NULL values in KNN SP-GiST. This test relies on
undetermined ordering showing different results on various platforms. This
commit removes that test. Will be replaced with better test later.
Discussion: https://postgr.es/m/6d51305e1159241cabee132f7efc7eff%40xs4all.nl
Backpatch-through: 12
This commit improves subject in two ways:
* It removes ugliness of 02f90879e7, which stores distance values and null
flags in two separate arrays after GISTSearchItem struct. Instead we pack
both distance value and null flag in IndexOrderByDistance struct. Alignment
overhead should be negligible, because we typically deal with at most few
"col op const" expressions in ORDER BY clause.
* It fixes handling of "col op NULL" expression in KNN-SP-GiST. Now, these
expression are not passed to support functions, which can't deal with them.
Instead, NULL result is implicitly assumed. It future we may decide to
teach support functions to deal with NULL arguments, but current solution is
bugfix suitable for backpatch.
Reported-by: Nikita Glukhov
Discussion: https://postgr.es/m/826f57ee-afc7-8977-c44c-6111d18b02ec%40postgrespro.ru
Author: Nikita Glukhov
Reviewed-by: Alexander Korotkov
Backpatch-through: 9.4
Make the error messages around GSSAPI encryption a bit clearer. Tweak
some messages to avoid plural problems.
Also make a code change for clarity. Using "conf" for "confidential"
is quite confusing. Using "conf_state" is perhaps not much better but
that's what the GSSAPI documentation uses, so there is at least some
hope of understanding it.
The sample output assumes non-standard-conforming interpretation of
backslashes in input literals, so the actual output didn't match.
Noticed while perusing another patch that touches this file.
Evidently this code is seldom checked, so I'm not going to bother
backpatching this fix.
The SQL spec defers to XQuery to define what the option flags are
for LIKE_REGEX patterns. XQuery says that:
* 's' allows the dot character to match newlines, which by
default it will not;
* 'm' allows ^ and $ to match at newlines, not only at the
start/end of the whole string.
Thus, these are *not* inverses as they are for the similarly-named
POSIX options, and neither one corresponds to the POSIX 'n' option.
Fortunately, Spencer's library does expose these two behaviors as
separately twiddlable flags, so we just have to fix the mapping from
JSP flag bits to REG flag bits. I also chose to rename the symbol
for 's' to DOTALL, to make it clearer that it's not the inverse
of MLINE.
Also, XQuery says that if the 'q' flag "is used together with the m, s,
or x flag, that flag has no effect". I read this as saying that 'q'
overrides the other flags; whoever wrote our code seems to have read
it backwards.
Lastly, while XQuery's 'x' flag is related to what Spencer's code
does for REG_EXPANDED, it's not the same or a subset. It seems best
to treat XQuery's 'x' as unimplemented for now. Maybe later we can
expand our regex code to offer 'x'-style parsing as a separate option.
While at it, refactor the jsonpath code so that (a) there's only
one copy of the flag transformation logic not two, and (b) the
processing of flags is independent of the order in which the flags
are written.
We need some documentation updates to go with this, but I'll
tackle that separately.
Back-patch to v12 where this code originated.
Discussion: https://postgr.es/m/CAPpHfdvDci4iqNF9fhRkTqhe-5_8HmzeLt56drH%2B_Rv2rNRqfg@mail.gmail.com
Reference: https://www.w3.org/TR/2017/REC-xpath-functions-31-20170321/#flags
SQL Standard 2016 defines SSSSS format pattern for seconds past midnight in
jsonpath .datetime() method and CAST (... FORMAT ...) SQL clause. In our
datetime parsing engine we currently support it with SSSS name.
This commit adds SSSSS as an alias for SSSS. Alias is added in favor of
upcoming jsonpath .datetime() method. But it's also supported in to_date()/
to_timestamp() as positive side effect.
Discussion: https://postgr.es/m/CAPpHfdsZgYEra_PeCLGNoXOWYx6iU-S3wF8aX0ObQUcZU%2B4XTw%40mail.gmail.com
Author: Nikita Glukhov, Alexander Korotkov
Reviewed-by: Anastasia Lubennikova, Peter Eisentraut
SQL Standard 2016 defines FF1-FF9 format patters for fractions of seconds in
jsonpath .datetime() method and CAST (... FORMAT ...) SQL clause. Parsing
engine of upcoming .datetime() method will be shared with to_date()/
to_timestamp().
This patch implements FF1-FF6 format patterns for upcoming jsonpath .datetime()
method. to_date()/to_timestamp() functions will also get support of this
format patterns as positive side effect. FF7-FF9 are not supported due to
lack of precision in our internal timestamp representation.
Extracted from original patch by Nikita Glukhov, Teodor Sigaev, Oleg Bartunov.
Heavily revised by me.
Discussion: https://postgr.es/m/fcc6fc6a-b497-f39a-923d-aa34d0c588e8%402ndQuadrant.com
Discussion: https://postgr.es/m/CAPpHfdsZgYEra_PeCLGNoXOWYx6iU-S3wF8aX0ObQUcZU%2B4XTw%40mail.gmail.com
Author: Nikita Glukhov, Teodor Sigaev, Oleg Bartunov, Alexander Korotkov
Reviewed-by: Anastasia Lubennikova, Peter Eisentraut
Commit d7f8d26d9 added new tests to the stats_ext regression test that
included creating a view in the public schema, without realising that
the stats_ext test runs in the same parallel group as the rules test,
which makes doing that unsafe.
This led to intermittent failures of the rules test on the buildfarm,
although I wasn't able to reproduce that locally. Fix by creating the
view in a different schema.
Tomas Vondra and Dean Rasheed, report and diagnosis by Thomas Munro.
Discussion: https://postgr.es/m/CA+hUKGKX9hFZrYA7rQzAMRE07L4hziCc-nO_b3taJpiuKyLLxg@mail.gmail.com
This reverts commit e7ff59686e. It
defined pg_atomic_fetch_add_u32_impl() without defining
pg_atomic_compare_exchange_u32_impl(), which is incompatible with
src/include/port/atomics/fallback.h. Per buildfarm member prairiedog.
Discussion: https://postgr.es/m/7517.1568470247@sss.pgh.pa.us
PostgreSQL has been unusable when built with xlc 13 and newer, which are
incompatible with our use of __fetch_and_add(). Back-patch to 9.5,
which introduced pg_atomic_fetch_add_u32().
Reviewed by Tom Lane.
Discussion: https://postgr.es/m/20190831071157.GA3251746@rfd.leadboat.com
Most WAL records are ignored in early SnapBuild snapshot build phases.
But it's critical to process some of them, so that later messages have
the correct transaction state after the snapshot is completely built; in
particular, XLOG_XACT_ASSIGNMENT messages are critical in order for
sub-transactions to be correctly assigned to their parent transactions,
or at least one assert misbehaves, as reported by Ildar Musin.
Diagnosed-by: Masahiko Sawada
Author: Masahiko Sawada
Discussion: https://postgr.es/m/CAONYFtOv+Er1p3WAuwUsy1zsCFrSYvpHLhapC_fMD-zNaRWxYg@mail.gmail.com
Lack of parens in the definitions could cause a statement using these
macros to have unexpected semantics. In current code no bug is
apparent, but best to fix the definitions to avoid problems down the
line.
Reported-by: Tom Lane
Discussion: https://postgr.es/m/19795.1568400476@sss.pgh.pa.us
The progress state was being clobbered once the first index completed
being rebuilt, causing the final phases of the operation not show
anything in the progress view. This was inadvertently broken in
03f9e5cba0, which added progress tracking for REINDEX.
(The reason this bugfix is this small is that I had already noticed this
problem when writing monitoring for CREATE INDEX, and had already worked
around it, as can be seen in discussion starting at
https://postgr.es/m/20190329150218.GA25010@alvherre.pgsql Fixing the
problem is just a matter of fixing one place touched by the REINDEX
monitoring.)
Reported by: Álvaro Herrera
Author: Álvaro Herrera
Discussion: https://postgr.es/m/20190801184333.GA21369@alvherre.pgsql
Include newitemoff in rmgr desc output for nbtree page split records.
In passing, correct an obsolete comment that claimed that newitemoff is
only logged for _L variant nbtree page split WAL records.
Both issues were oversights in commit 2c03216d83, which revamped the
WAL format.
Author: Peter Geoghegan
Backpatch: 9.5-, where the WAL format was revamped.
Since WITH CHECK OPTION was introduced, ExecInitModifyTable has
initialized WCO expressions with the wrong plan node as parent -- that is,
it passed its input subplan not the ModifyTable node itself. Up to now
we thought this was harmless, but bug #16006 from Vinay Banakar shows it's
not: if the input node is a SubqueryScan then ExecInitWholeRowVar can get
confused into doing the wrong thing. (The fact that ExecInitWholeRowVar
contains such logic is certainly a horrid kluge that doesn't deserve to
live, but figuring out another way to do that is a task for some other day.)
Andres had already noticed the wrong-parent mistake and fixed it in commit
148e632c0, but not being aware of any user-visible consequences, he quite
reasonably didn't back-patch. This patch is simply a back-patch of
148e632c0, plus addition of a test case based on bug #16006. I also added
the test case to v12/HEAD, even though the bug is already fixed there.
Back-patch to all supported branches. 9.4 lacks RLS policies so the
new test case doesn't work there, but I'm pretty sure a test could be
devised based on using a whole-row Var in a plain WITH CHECK OPTION
condition. (I lack the cycles to do so myself, though.)
Andres Freund and Tom Lane
Discussion: https://postgr.es/m/16006-99290d2e4642cbd5@postgresql.org
Discussion: https://postgr.es/m/20181205225213.hiwa3kgoxeybqcqv@alap3.anarazel.de
This adds tests to cover more code paths to ignore backslash commands in
false branches when using \if|\elif|\else, and improves the coverage of
\elif.
Author: Fabien Coelho
Discussion: https://postgr.es/m/alpine.DEB.2.21.1908281618520.28828@lancre
This is a second try at what commit 57431a911 tried to do, namely,
launch the syslogger before we open postmaster sockets so that our
messages about the sockets end up in the syslogger files. That
commit fell foul of a bunch of subtle issues caused by trying to
launch a postmaster child process before creating shared memory.
Rather than messing with that interaction, let's postpone opening
the sockets till after we launch the syslogger.
This would not have been terribly safe before commit 7de19fbc0,
because we relied on socket opening to detect whether any competing
postmasters were using the same port number. But now that we choose
IPC keys without regard to the port number, there's no interaction
to worry about.
Also delay creation of the external PID file (if requested) till after
the sockets are open, since external code could plausibly be relying
on that ordering of events. And postpone most of the work of
RemovePgTempFiles() so that that potentially-slow processing still
happens after we make the external PID file. We have to be a bit
careful about that last though: as noted in the discussion subsequent to
bug #15804, EXEC_BACKEND builds still have to clear the parameter-file
temp dir before launching the syslogger.
Patch by me; thanks to Michael Paquier for review/testing.
Discussion: https://postgr.es/m/15804-3721117bf40fb654@postgresql.org
Procedures are supported since v11 and \dfp can be used since this
version, but it was not mentioned as a supported option in the
description of describeFunctions() which handles \df in psql.
Extracted from a larger patch.
Author: Fabien Coelho
Discussion: https://postgr.es/m/alpine.DEB.2.21.1908281618520.28828@lancre
Depending on the system used, t/*.pl may not be expanded into a list of
tests which can be consumed by prove when attempting to run TAP tests on
a given path. Fix that by using glob() directly in the script, to make
sure that a complete list of tests is provided. This has not proved to
be an issue with MSVC as the list was properly expanded, but it is on
Linux with perl's system().
This is extracted from a larger patch.
Author: Tom Lane
Discussion: https://postgr.es/m/6628.1567958876@sss.pgh.pa.us
Backpatch-through: 9.4
When building statistics, we need to decide how many rows to sample and
how accurate the resulting statistics should be. Until now, it was not
possible to explicitly define statistics target for extended statistics
objects, the value was always computed from the per-attribute targets
with a fallback to the system-wide default statistics target.
That's a bit inconvenient, as it ties together the statistics target set
for per-column and extended statistics. In some cases it may be useful
to require larger sample / higher accuracy for extended statics (or the
other way around), but with this approach that's not possible.
So this commit introduces a new command, allowing to specify statistics
target for individual extended statistics objects, overriding the value
derived from per-attribute targets (and the system default).
ALTER STATISTICS stat_name SET STATISTICS target_value;
When determining statistics target for an extended statistics object we
first look at this explicitly set value. When this value is -1, we fall
back to the old formula, looking at the per-attribute targets first and
then the system default. This means the behavior is backwards compatible
with older PostgreSQL releases.
Author: Tomas Vondra
Discussion: https://postgr.es/m/20190618213357.vli3i23vpkset2xd@development
Reviewed-by: Kirk Jamison, Dean Rasheed
Up to now, async.c scanned its whole array of per-backend state
whenever it needed to find listening backends. That's expensive
if MaxBackends is large, so extend the data structure with list
links that thread the active entries together.
A downside of this change is that asyncQueueUnregister (unregister
a listening backend at backend exit) now requires exclusive not shared
lock, and it can take awhile if there are many other listening
backends. We could improve the latter issue by using a doubly- not
singly-linked list, but it's probably not worth the storage space;
typical usage patterns for LISTEN/NOTIFY have fairly long-lived
listeners.
In return for that, Exec_ListenPreCommit (initially register a
listening backend), SignalBackends, and asyncQueueAdvanceTail
get significantly faster when MaxBackends is much larger than
the number of listening backends. If most of the potential
backend slots are listening, we don't win, but that's a case
where the actual interprocess-signal overhead is going to swamp
these considerations anyway.
Martijn van Oosterhout, hacked a bit more by me
Discussion: https://postgr.es/m/CADWG95vtRBFDdrx1JdT1_9nhOFw48KaeTev6F_LtDQAFVpSPhA@mail.gmail.com
There was some duplicate code to run SHOW transaction_read_only to
determine whether the server is read-write or read-only. Reduce it by
adding another state to the state machine.
Author: Hari Babu Kommi
Reviewed-by: Takayuki Tsunakawa, Álvaro Herrera
Discussion: https://postgr.es/m/CAJrrPGe_qgdbbN+yBgEVpd+YLHXXjTruzk6RmTMhqrFig+32ag@mail.gmail.com
Assert that _bt_binsrch() binary searches with scantid set in insertion
scankey cannot be performed on leaf pages. Leaf-level binary searches
where scantid is set must use _bt_binsrch_insert() instead.
_bt_binsrch_insert() is likely to have additional responsibilities in
the future, such as searching within GIN-style posting lists using
scantid. It seems like a good idea to tighten things up now.
Don't just assume that the next port is free; it might not be, or
if we're really unlucky it might even be out of the TCP range.
Do it honestly with two get_free_port() calls instead.
This is surely a pretty low-probability problem, but I think it
explains a buildfarm failure seen today, so let's fix it.
Back-patch to v11 where this script was added.
Discussion: https://postgr.es/m/25124.1568052346@sss.pgh.pa.us
Modern versions of msys2 have changed the treatment of "cmd /c" so that
the runtime will try to convert the switch to a native file path. This
patch adds a setting to inhibit that behaviour.
Discussion: https://postgr.es/m/3227042f-cfcc-745a-57dd-fb8c471f8ddf@2ndQuadrant.com
Backpatch to all live branches.
In ad0bda5d24 I changed the EvalPlanQual machinery to store
substitution tuples in slot, instead of using plain HeapTuples. The
main motivation for that was that using HeapTuples will be inefficient
for future tableams. But it turns out that that conversion was buggy
for non-locking rowmarks - the wrong tuple descriptor was used to
create the slot.
As a secondary issue 5db6df0c0 changed ExecLockRows() to begin EPQ
earlier, to allow to fetch the locked rows directly into the EPQ
slots, instead of having to copy tuples around. Unfortunately, as Tom
complained, that forces some expensive initialization to happen
earlier.
As a third issue, the test coverage for EPQ was clearly insufficient.
Fixing the first issue is unfortunately not trivial: Non-locked row
marks were fetched at the start of EPQ, and we don't have the type
information for the rowmarks available at that point. While we could
change that, it's not easy. It might be worthwhile to change that at
some point, but to fix this bug, it seems better to delay fetching
non-locking rowmarks when they're actually needed, rather than
eagerly. They're referenced at most once, and in cases where EPQ
fails, might never be referenced. Fetching them when needed also
increases locality a bit.
To be able to fetch rowmarks during execution, rather than
initialization, we need to be able to access the active EPQState, as
that contains necessary data. To do so move EPQ related data from
EState to EPQState, and, only for EStates creates as part of EPQ,
reference the associated EPQState from EState.
To fix the second issue, change EPQ initialization to allow use of
EvalPlanQualSlot() to be used before EvalPlanQualBegin() (but
obviously still requiring EvalPlanQualInit() to have been done).
As these changes made struct EState harder to understand, e.g. by
adding multiple EStates, significantly reorder the members, and add a
lot more comments.
Also add a few more EPQ tests, including one that fails for the first
issue above. More is needed.
Reported-By: yi huang
Author: Andres Freund
Reviewed-By: Tom Lane
Discussion:
https://postgr.es/m/CAHU7rYZo_C4ULsAx_LAj8az9zqgrD8WDd4hTegDTMM1LMqrBsg@mail.gmail.comhttps://postgr.es/m/24530.1562686693@sss.pgh.pa.us
Backpatch: 12-, where the EPQ changes were introduced
f2e40380 introduces support of non-key attributes in GiST indexes. Then if
get_index_column_opclass() is asked by gistproperty() to get an opclass of
non-key column, it returns garbage past oidvector value. This commit fixes
that by making get_index_column_opclass() return InvalidOid in this case.
Discussion: https://postgr.es/m/20190902231948.GA5343%40alvherre.pgsql
Author: Nikita Glukhov, Alexander Korotkov
Backpatch-through: 12
Some of these are quite old, but that doesn't make them not bugs.
We'd rather report a failure via elog than SIGSEGV.
While at it, uniformly spell the error check as !RelationIsValid(rel)
rather than a bare rel == NULL test. The machine code is the same
but it seems better to be consistent.
Coverity complained about this today, not sure why, because the
mistake is in fact old.
In order to implement NULL LAST semantic GiST previously assumed distance to
the NULL value to be Inf. However, our distance functions can return Inf and
NaN for non-null values. In such cases, NULL LAST semantic appears to be
broken. This commit fixes that by introducing separate array of null flags for
distances.
Backpatch to all supported versions.
Discussion: https://postgr.es/m/CAPpHfdsNvNdA0DBS%2BwMpFrgwT6C3-q50sFVGLSiuWnV3FqOJuQ%40mail.gmail.com
Author: Alexander Korotkov
Backpatch-through: 9.4
Previously plain float comparison was used in GiST pairing heap. Such
comparison doesn't provide proper ordering for value sets containing Inf and Nan
values. This commit fixes that by usage of float8_cmp_internal(). Note, there
is remaining problem with NULL distances, which are represented as Inf in
pairing heap. It would be fixes in subsequent commit.
Backpatch to all supported versions.
Reported-by: Andrey Borodin
Discussion: https://postgr.es/m/CAPpHfdsNvNdA0DBS%2BwMpFrgwT6C3-q50sFVGLSiuWnV3FqOJuQ%40mail.gmail.com
Author: Alexander Korotkov
Reviewed-by: Heikki Linnakangas
Backpatch-through: 9.4
When using COMMIT AND CHAIN or ROLLBACK AND CHAIN not in an explicit
transaction block, the previous implementation would leave a
transaction block active in the ROLLBACK case but not the COMMIT case.
To fix for now, error out when using these commands not in an explicit
transaction block. This restriction could be lifted if a sensible
definition and implementation is found.
Bug: #15977
Author: fn ln <emuser20140816@gmail.com>
Reviewed-by: Fabien COELHO <coelho@cri.ensmp.fr>
Commit 6f6b99d13 stuck an INFO message into the fast path for
checking partition constraints, for no very good reason except
that it made it easy for the regression tests to verify that
that path was taken. Assorted later patches did likewise,
increasing the unsuppressable-chatter level from ALTER TABLE
even more. This isn't good for the user experience, so let's
drop these messages down to DEBUG1 where they belong. So as
not to have a loss of test coverage, create a TAP test that
runs the relevant queries with client_min_messages = DEBUG1
and greps for the expected messages.
This testing method is a bit brute-force --- in particular,
it duplicates the execution of a fair amount of the core
create_table and alter_table tests. We experimented with
other solutions, but running any significant amount of
standard testing with client_min_messages = DEBUG1 seems
to have a lot of output-stability pitfalls, cf commits
bbb96c370 and 5655565c0. Possibly at some point we'll look
into whether we can reduce the amount of test duplication.
Backpatch into v12, because some of these messages are new
in v12 and we don't really want to ship it that way.
Sergei Kornilov
Discussion: https://postgr.es/m/81911511895540@web58j.yandex.ru
Discussion: https://postgr.es/m/4859321552643736@myt5-02b80404fd9e.qloud-c.yandex.net
As a result of some long-ago quick hacks, the SIMILAR TO operator
and the corresponding flavor of substring() interpreted "ESCAPE NULL"
as selecting the default escape character '\'. This is both
surprising and not per spec: the standard is clear that these
functions should return NULL for NULL input.
Additionally, because of inconsistency of the strictness markings
of 3-argument substring() and similar_escape(), the planner could not
inline the SQL definition of substring(), resulting in a substantial
performance penalty compared to the underlying POSIX substring()
function.
The simplest fix for this would be to change the strictness marking
of similar_escape(), but if we do that we risk breaking existing views
that depend on that function. Hence, leave similar_escape() as-is
as a compatibility function, and instead invent a new function
similar_to_escape() that comes in two strict variants.
There are a couple of other behaviors in this area that are also
not per spec, but they are documented and seem generally at least
as sane as the spec's definition, so leave them alone. But improve
the documentation to describe them fully.
Patch by me; thanks to Álvaro Herrera and Andrew Gierth for review
and discussion.
Discussion: https://postgr.es/m/14047.1557708214@sss.pgh.pa.us
The test for SysV support currently involves looking for the perl
modules IPC::SharedMem and IPC::SysV. However, the perl on msys2 has
these modules but the tests fail. Therefore, force skipping the tests on
Windows platforms unconditionally.
Discussion: https://postgr.es/m/176e86ba-1a46-9d8c-5ae4-9865a463b411@2ndQuadrant.com
This moves much of the non-heap-specific logic from toast_delete and
toast_insert_or_update into a helper functions accessible via a new
header, toast_helper.h. Using the functions in this module, a table
AM can implement creation and deletion of TOAST table rows with
much less code duplication than was possible heretofore. Some
table AMs won't want to use the TOAST logic at all, but for those
that do this will make that easier.
Patch by me, reviewed and tested by Prabhat Sabu, Thomas Munro,
Andres Freund, and Álvaro Herrera.
Discussion: http://postgr.es/m/CA+TgmoZv-=2iWM4jcw5ZhJeL18HF96+W1yJeYrnGMYdkFFnEpQ@mail.gmail.com
The old code didn't differentiate between a read error and a
concurrent truncation. fread reports both of these by returning 0;
you have to use feof() or ferror() to distinguish between them,
which this code did not do.
It might be a better idea to use read() rather than fread() here,
so that we can display a less-generic error message, but I'm not
sure that would qualify as a back-patchable bug fix, so just do
this much for now.
Jeevan Chalke, reviewed by Jeevan Ladhe and by me.
Discussion: http://postgr.es/m/CA+TgmobG4ywMzL5oQq2a8YKp8x2p3p1LOMMcGqpS7aekT9+ETA@mail.gmail.com
Previously even if postmaster died and WaitLatch() woke up with that event
while pg_promote() was waiting for the standby promotion to finish,
pg_promote() did nothing special and kept waiting until timeout occurred.
This could cause a busy loop.
This patch make pg_promote() return false immediately when postmaster
dies, to avoid such a busy loop.
Back-patch to v12 where pg_promote() was added.
Author: Fujii Masao
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CAHGQGwEs9ROgSp+QF+YdDU+xP8W=CY1k-_Ov-d_Z3JY+to3eXA@mail.gmail.com
This approach provides a much tighter binding between a data directory
and the associated SysV shared memory block (and SysV or named-POSIX
semaphores, if we're using those). Key collisions are still possible,
but only between data directories stored on different filesystems,
so the situation should be negligible in practice. More importantly,
restarting the postmaster with a different port number no longer
risks failing to identify a relevant shared memory block, even when
postmaster.pid has been removed. A standalone backend is likewise
much more certain to detect conflicting leftover backends.
(In the longer term, we might now think about deprecating the port as
a cluster-wide value, so that one postmaster could support sockets
with varying port numbers. But that's for another day.)
The hazards fixed here apply only on Unix systems; our Windows code
paths already use identifiers derived from the data directory path
name rather than the port.
src/test/recovery/t/017_shm.pl, which intends to test key-collision
cases, has been substantially rewritten since it can no longer use
two postmasters with identical port numbers to trigger the case.
Instead, use Perl's IPC::SharedMem module to create a conflicting
shmem segment directly. The test script will be skipped if that
module is not available. (This means that some older buildfarm
members won't run it, but I don't think that that results in any
meaningful coverage loss.)
Patch by me; thanks to Noah Misch and Peter Eisentraut for discussion
and review.
Discussion: https://postgr.es/m/16908.1557521200@sss.pgh.pa.us
detoast.c/h contain functions required to detoast a datum, partially
or completely, plus a few other utility functions for examining the
size of toasted datums.
toast_internals.c/h contain functions that are used internally to the
TOAST subsystem but which (mostly) do not need to be accessed from
outside.
heaptoast.c/h contains code that is intrinsically specific to the
heap AM, either because it operates on HeapTuples or is based on the
layout of a heap page.
detoast.c and toast_internals.c are placed in
src/backend/access/common rather than src/backend/access/heap. At
present, both files still have dependencies on the heap, but that will
be improved in a future commit.
Patch by me, reviewed and tested by Prabhat Sabu, Thomas Munro,
Andres Freund, and Álvaro Herrera.
Discussion: http://postgr.es/m/CA+TgmoZv-=2iWM4jcw5ZhJeL18HF96+W1yJeYrnGMYdkFFnEpQ@mail.gmail.com
Use the explicit_bzero() function in places where it is important that
security information such as passwords is cleared from memory. There
might be other places where it could be useful; this is just an
initial collection.
For platforms that don't have explicit_bzero(), provide various
fallback implementations. (explicit_bzero() itself isn't standard,
but as Linux/glibc, FreeBSD, and OpenBSD have it, it's the most common
spelling, so it makes sense to make that the invocation point.)
Discussion: https://www.postgresql.org/message-id/flat/42d26bde-5d5b-c90d-87ae-6cab875f73be%402ndquadrant.com
The logic ending progress reporting for a backend entry introduced by
b6fb647 causes callers of pgstat_progress_end_command() to do some extra
work when track_activities is enabled as the process fields are reset in
the backend entry even if no command were started for reporting.
This resets the fields only if a command is registered for progress
reporting, and only if track_activities is enabled.
Author: Masahiho Sawada
Discussion: https://postgr.es/m/CAD21AoCry_vJ0E-m5oxJXGL3pnos-xYGCzF95rK5Bbi3Uf-rpA@mail.gmail.com
Backpatch-through: 9.6
Since the addition of fsync requests in bc34223 to make base backup data
consistent on disk once pg_basebackup finishes, each tablespace tar file
is individually flushed once completed, with an additional flush of the
parent directory when the base backup finishes. While holding a
connection to the server, a fsync request taking a long time may cause a
failure of the base backup, which is annoying for any integration. A
recent example of breakage can involve tcp_user_timeout, but
wal_sender_timeout can cause similar problems.
While reviewing the code, there was a second issue causing too many
fsync requests to be done for the same WAL data. As recursive fsyncs
are done at the end of the backup for both the plain and tar formats
from the base target directory where everything is written, it is fine
to disable fsyncs when fetching or streaming WAL.
Reported-by: Ryohei Takahashi
Author: Michael Paquier
Reviewed-by: Ryohei Takahashi
Discussion: https://postgr.es/m/OSBPR01MB4550DAE2F8C9502894A45AAB82BE0@OSBPR01MB4550.jpnprd01.prod.outlook.com
Backpatch-through: 10
This function is only used by xlogreader.c itself, so there's no need to
export it. It was introduced by commit 3b02ea4f07 with the apparent
intention that it could be used externally, but I couldn't find any
external code calling it.
I (Álvaro) couldn't resist the urge to sort nearby function prototypes
properly while at it.
Author: Antonin Houska
Discussion: https://postgr.es/m/14984.1554998742@spoje.net
The message was included as a parameter when this function was added in
dcb2bda9b7, but I don't think it has ever served any useful purpose.
Let's stop spreading it pointlessly.
Reviewed by Amit Langote and Peter Eisentraut.
Discussion: https://postgr.es/m/20190806224728.GA17233@alvherre.pgsql
Clarify in the help output and documentation that -n, -t etc. take a
"pattern" rather than a "schema" or "table" etc. This was especially
confusing now that the new pg_dumpall --exclude-database option was
documented with "pattern" and the others not, even though they all
behave the same.
Discussion: https://www.postgresql.org/message-id/flat/b85f3fa1-b350-38d1-1893-4f7911bd7310%402ndquadrant.com
Document that the tablespace sizes are in units of kilobytes. Make
the pg_basebackup source code a bit clearer about this, too.
Reviewed-by: Magnus Hagander <magnus@hagander.net>
The leak happens in str_tolower, str_toupper and str_initcap, which are
used in several places including their equivalent SQL-level functions,
and can only be triggered when using an ICU-provided collation when
converting the input string.
b615920 fixed a similar leak. Backpatch down 10 where ICU collations
have been introduced.
Author: Konstantin Knizhnik
Discussion: https://postgr.es/m/94c0ad0a-cbc2-e4a3-7829-2bdeaf9146db@postgrespro.ru
Backpatch-through: 10
In what seems like a fit of misplaced optimization,
ExtractReplicaIdentity() accessed the relation's replica-identity
index without taking any lock on it. Usually, the surrounding query
already holds some lock so this is safe enough ... but in the case
of a previously-planned delete, there might be no existing lock.
Given a suitable test case, this is exposed in v12 and HEAD by an
assertion added by commit b04aeb0a0.
The whole thing's rather poorly thought out anyway; rather than
looking directly at the index, we should use the index-attributes
bitmap that's held by the parent table's relcache entry, as the
caller functions do. This is more consistent and likely a bit
faster, since it avoids a cache lookup. Hence, change to doing it
that way.
While at it, rather than blithely assuming that the identity
columns are non-null (with catastrophic results if that's wrong),
add assertion checks that they aren't null. Possibly those should
be actual test-and-elog, but I'll leave it like this for now.
In principle, this is a bug that's been there since this code was
introduced (in 9.4). In practice, the risk seems quite low, since
we do have a lock on the index's parent table, so concurrent
changes to the index's catalog entries seem unlikely. Given the
precedent that commit 9c703c169 wasn't back-patched, I won't risk
back-patching this further than v12.
Per report from Hadi Moshayedi.
Discussion: https://postgr.es/m/CAK=1=Wrek44Ese1V7LjKiQS-Nd-5LgLi_5_CskGbpggKEf3tKQ@mail.gmail.com
After an unexpected connection loss and successful reconnection,
psql neglected to resynchronize its internal state about the server,
such as server version. Ordinarily we'd be reconnecting to the same
server and so this isn't really necessary, but there are scenarios
where we do need to update --- one example is where we have a list
of possible connection targets and they're not all alike.
Define "resynchronize" as including connection_warnings(), so that
this case acts the same as \connect. This seems useful; for example,
if the server version did change, the user might wish to know that.
An attuned user might also notice that the new connection isn't
SSL-encrypted, for example, though this approach isn't especially
in-your-face about such changes. Although this part is a behavioral
change, it only affects interactive sessions, so it should not break
any applications.
Also, in do_connect, make sure that we desynchronize correctly when
abandoning an old connection in non-interactive mode.
These problems evidently are the result of people patching only one
of the two places where psql deals with connection changes, so insert
some cross-referencing comments in hopes of forestalling future bugs
of the same ilk.
Lastly, in Windows builds, issue codepage mismatch warnings only at
startup, not during reconnections. psql's codepage can't change
during a reconnect, so complaining about it again seems like useless
noise.
Peter Billen and Tom Lane. Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAMTXbE8e6U=EBQfNSe01Ej17CBStGiudMAGSOPaw-ALxM-5jXg@mail.gmail.com
Similarly to the signed versions added in 4d6ad31, this adds a set of
inline functions for overflow checks with unsigned integers, including
uint16, uint32 and uint64. This relies on compiler built-in overflow
checks by default if available. The behavior of unsigned integers is
well-defined so the fallback implementations checks are simple for
additions and subtractions. Multiplications avoid division-based checks
which are expensive if possible, still this can happen for uint64 if
128-bit integers are not available.
While on it, the code in common/int.h is reorganized to avoid too many
duplicated comments. The new macros will be used in a follow-up patch.
All thanks to Andres Freund for the input provided.
Author: Fabien Coelho, Michael Paquier
Discussion: https://postgr.es/m/20190830073423.GB2354@paquier.xyz
The comment describing the string format was a lie. Make it agree with
reality, add/improve some other comments, fix coding style for loops with
empty bodies. Also add an Assert that we counted parameters correctly,
because the spread-out logic for that looks pretty fragile.
No actual bugs fixed here, so no need to back-patch.
Discussion: https://postgr.es/m/848B1649C8A6274AA527C4472CA11EDD5FC70CBE@G01JPEXMBYT02
The comment did not match what the code actually did for integers with
the 43rd bit set. You get an integer like that, if you have a posting
list with two adjacent TIDs that are more than 2^31 blocks apart.
According to the comment, we would store that in 6 bytes, with no
continuation bit on the 6th byte, but in reality, the code encodes it
using 7 bytes, with a continuation bit on the 6th byte as normal.
The decoding routine also handled these 7-byte integers correctly, except
for an overflow check that assumed that one integer needs at most 6 bytes.
Fix the overflow check, and fix the comment to match what the code
actually does. Also fix the comment that claimed that there are 17 unused
bits in the 64-bit representation of an item pointer. In reality, there
are 64-32-11=21.
Fitting any item pointer into max 6 bytes was an important property when
this was written, because in the old pre-9.4 format, item pointers were
stored as plain arrays, with 6 bytes for every item pointer. The maximum
of 6 bytes per integer in the new format guaranteed that we could convert
any page from the old format to the new format after upgrade, so that the
new format was never larger than the old format. But we hardly need to
worry about that anymore, and running into that problem during upgrade,
where an item pointer is expanded from 6 to 7 bytes such that the data
doesn't fit on a page anymore, is implausible in practice anyway.
Backpatch to all supported versions.
This also includes a little test module to test these large distances
between item pointers, without requiring a 16 TB table. It is not
backpatched, I'm including it more for the benefit of future development
of new posting list formats.
Discussion: https://www.postgresql.org/message-id/33bfc20a-5c86-f50c-f5a5-58e9925d05ff%40iki.fi
Reviewed-by: Masahiko Sawada, Alexander Korotkov
RelationAllowsEarlyPruning() performed a catalog scan, but is used
in two contexts where that was a bad idea:
1. In heap_page_prune_opt(), which runs very frequently in some large
scans. This caused major performance problems in a field report
that was easy to reproduce.
2. In TestForOldSnapshot(), which runs while we hold a buffer content
lock. It's not clear if this was guaranteed to be free of buffer
deadlock risk.
The check was introduced in commit 2cc41acd8 and defended against a
real problem: 9.6's hash indexes have no page LSN and so we can't
allow early pruning (ie the snapshot-too-old feature). We can remove
the check from all later releases though: hash indexes are now logged,
and there is no way to create UNLOGGED indexes on regular logged
tables.
If a future release allows such a combination, it might need to put
a similar check in place, but it'll need some more thought.
Back-patch to 10.
Author: Thomas Munro
Reviewed-by: Tom Lane, who spotted the second problem
Discussion: https://postgr.es/m/CA%2BhUKGKT8oTkp5jw_U4p0S-7UG9zsvtw_M47Y285bER6a2gD%2Bg%40mail.gmail.com
Discussion: https://postgr.es/m/CAA4eK1%2BWy%2BN4eE5zPm765h68LrkWc3Biu_8rzzi%2BOYX4j%2BiHRw%40mail.gmail.com
check_float4_val() checks after underflow and overflow of values
converted from float8 to float4, but there has never been any regression
tests for that. This brings the coverage of float.h to 100%.
Author: Movead Li
Discussion: https://postgr.es/m/20190822174636998766188@highgo.ca
In this case, the transfer uses a libpq connection, which is subject to
the timeout parameters set at system level, and this can make the rewind
operation suddenly canceled which is not good for automation. One
workaround to such issues would be to use PGOPTIONS to enforce the
wanted timeout parameters, but that's annoying, and for example pg_dump,
which can run potentially long-running queries disables all types of
timeouts.
lock_timeout and statement_timeout are the ones which can cause problems
now. Note that pg_rewind does not use transactions, so disabling
idle_in_transaction_session_timeout is optional, but it feels safer to
do so for the future.
This is back-patched down to 9.5. idle_in_transaction_session_timeout
is only present since 9.6.
Author: Alexander Kukushkin
Discussion: https://postgr.es/m/CAFh8B=krcVXksxiwVQh1SoY+ziJ-JC=6FcuoBL3yce_40Es5_g@mail.gmail.com
Backpatch-through: 9.5
Commit a4327296d taught pg_regress proper to do this, but
missed the opportunity to do likewise in the isolationtester
and ecpg variants of pg_regress. Seems like this might be
helpful for tracking down issues exposed by those tests.
Turns out that returning "unrecognized signal" is confusing.
Make it explicit that the platform lacks any support for signal names.
(At least of the machines in the buildfarm, only HPUX lacks it.)
Back-patch to v12 where we invented this function.
Discussion: https://postgr.es/m/3067.1566870481@sss.pgh.pa.us
Commit efada2b8e9, which made the nbtree page deletion algorithm more
robust, removed the concept of a half-dead internal page. Remove a
comment about half dead parent pages that was overlooked.
An empty file name or subdirectory name leads join_path_components() to
just produce the parent directory name, which leads to weird failures or
recursive inclusions. Let's throw a specific error for that. It takes
only slightly more code to detect all-blank names, so do so.
Also, detect direct recursion, ie a file calling itself. As coded
this will also detect recursion via "include_dir '.'", which is
perhaps more likely than explicitly including the file itself.
Detecting indirect recursion would require API changes for guc-file.l
functions, which seems not worth it since extensions might call them.
The nesting depth limit will catch such cases eventually, just not
with such an on-point error message.
In passing, adjust the example usages in postgresql.conf.sample
to perhaps eliminate the problem at the source: there's no reason
for the examples to suggest that an empty value is valid.
Per a trouble report from Brent Bates. Back-patch to 9.5; the
issue is old, but the code in 9.4 is enough different that the
patch doesn't apply easily, and it doesn't seem worth the trouble
to fix there.
Ian Barwick and Tom Lane
Discussion: https://postgr.es/m/8c8bcbca-3bd9-dc6e-8986-04a5abdef142@2ndquadrant.com
FD_SETSIZE needs to be declared before winsock2.h, or it is possible to
run into buffer overflow issues when using --jobs. This is similar to
pgbench's solution done in a23c641.
This has been introduced by 71d84ef, and older versions have been using
the default value of FD_SETSIZE, defined at 64.
Per buildfarm member jacana, but this impacts all Windows animals
running the TAP tests. I have reproduced the failure locally to check
the patch.
Author: Michael Paquier
Reviewed-by: Andrew Dunstan
Discussion: https://postgr.es/m/20190826054000.GE7005@paquier.xyz
Backpatch-through: 9.5
If a test case tried to set an invalid value of synchronous_standby_names,
the test script didn't detect that, which seems like a bad idea.
Noticed while testing a proposed patch that broke some of these
test cases.
A report from Alvaro Herrera shows that if we're in PM_STARTUP
state, and we spawn a dead_end child to reject some incoming
connection request, and that child dies with an unexpected exit
code, the postmaster does not respond well. We correctly send
SIGQUIT to the startup process, but then:
* if the startup process exits with nonzero exit code, as expected,
we thought that that indicated a crash and aborted startup.
* if the startup process exits with zero exit code, which is possible
due to the inherent race condition, we'd advance to PM_RUN state
which is fine --- but the code forgot that AbortStartTime would be
nonzero in this situation. We'd either die on the Asserts saying
that it was zero, or perhaps misbehave later on. (A quick look
suggests that the only misbehavior might be busy-waiting due to
DetermineSleepTime doing the wrong thing.)
To fix the first point, adjust the state-machine logic to recognize
that a nonzero exit code is expected after sending SIGQUIT, and have
it transition to a state where we can restart the startup process.
To fix the second point, change the Asserts to clear the variable
rather than just claiming it should be clear already.
Perhaps we could improve this further by not treating a crash of
a dead_end child as a reason for panic'ing the database. However,
since those child processes are connected to shared memory, that
seems a bit risky. There are few good reasons for a dead_end child
to report failure anyway (the cause of this in Alvaro's report is
quite unclear). On balance, therefore, a minimal fix seems best.
This is an oversight in commit 45811be94. While that was back-patched,
I'm hesitant to back-patch this change. The lack of reasons for a
dead_end child to fail suggests that the case should be very rare in
the field, which squares with the lack of reports; so it seems like
this might not be worth the risk of introducing new issues. In any
case we can let it bake awhile in HEAD before considering a back-patch.
Discussion: https://postgr.es/m/20190615160950.GA31378@alvherre.pgsql
Previously 'uname -r' on Msys2 reported a kernele release starting with
2. The latest version starts with 3. In commit 1638623f we specifically
looked for one starting with 2. This is now changed to look for any
digit between 2 and 9.
backpatch to release 10.
On msys2, 'uname -s' reports a string starting MSYS instead on MINGW
as happens on msys1. Treat these both the same way. This reverts
608a710195 in favor of a more general solution.
Backpatch to all live branches.
When trying to use a high number of jobs, vacuumdb (and more recently
reindexdb) has only checked for a maximum number of jobs used, causing
confusing failures when running out of file descriptors when the jobs
open connections to Postgres. This commit changes the error handling so
as we do not check anymore for a maximum number of allowed jobs when
parsing the option value with FD_SETSIZE, but check instead if a file
descriptor is within the supported range when opening the connections
for the jobs so as this is detected at the earliest time possible.
Also, improve the error message to give a hint about the number of jobs
recommended, using a wording given by the reviewers of the patch.
Reported-by: Andres Freund
Author: Michael Paquier
Reviewed-by: Andres Freund, Álvaro Herrera, Tom Lane
Discussion: https://postgr.es/m/20190818001858.ho3ev4z57fqhs7a5@alap3.anarazel.de
Backpatch-through: 9.5
POSIX permits getopt() to advance optind beyond argc when the last
argv entry is an option that requires an argument and hasn't got one.
It seems that no major platforms actually do that, but musl does,
so that something like "psql -f" would crash with that libc.
Add a check that optind is in range before trying to look at the
possibly-bogus option.
Report and fix by Quentin Rameau. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/20190825100617.GA6087@fifth.space
We were setting extra_float_digits = 0 to avoid platform-dependent
output in this test, but that's still able to expose platform-specific
roundoff behavior in some new test cases added by commit a3d284485,
as reported by Peter Eisentraut. Reduce it to -1 to hide that.
(Over in geometry.sql, we're using -3, which is an ancient decision
dating to 337f73b1b. I wonder whether that's overkill now. But
there's probably little value in trying to change it.)
Back-patch to v12 where a3d284485 came in; there's no evidence that
we have any platform-dependent issues here before that.
Discussion: https://postgr.es/m/15551268-e224-aa46-084a-124b64095ee3@2ndquadrant.com
Bleeding-edge LLVM has stopped supplying replacements for various
C++14 library features, for people on older C++ versions. Since we're
not ready to require C++14 yet, just use plain old new instead of
make_unique. As revealed by buildfarm animal seawasp.
Back-patch to 11.
Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/CA%2BhUKGJWG7unNqmkxg7nC5o3o-0p2XP6co4r%3D9epqYMm8UY4Mw%40mail.gmail.com
The Postgres approach to coupling locks during an ascent of the tree is
slightly different to the approach taken by Lehman and Yao. Add a new
paragraph to the "Differences to the Lehman & Yao algorithm" section of
the nbtree README that explains the similarities and differences.
This is useful for developers to find out if an isolation spec is
over-engineered or if it needs more work by warning at the end of a
test run if a step is not used, generating a failure with extra diffs.
While on it, clean up all the specs which include steps not used in any
permutations to simplify them.
Author: Michael Paquier
Reviewed-by: Asim Praveen, Melanie Plageman
Discussion: https://postgr.es/m/20190819080820.GG18166@paquier.xyz
The original purpose of the dry-run mode is to be able to print all the
possible permutations from a spec file, but it has become less useful
since isolation tests has improved regarding deadlock detection as one
step not wanted by the author could block indefinitely now (originally
the step blocked would have been detected rather quickly). Per
discussion, let's remove it.
Author: Michael Paquier
Reviewed-by: Asim Praveen, Melanie Plageman
Discussion: https://postgr.es/m/20190819080820.GG18166@paquier.xyz
Adjust the struct comment that describes how page splits use their
descent stack to cascade up the tree from the leaf level.
In passing, fix up some unrelated nbtree comments that had typos or were
obsolete.
In early development patches, "replication origins" were called "identifiers";
almost everything was renamed, but these references to the old terminology
went unnoticed.
Reported-by: Craig Ringer
Using pg_pltemplate as test data was probably not very forward-looking,
considering we've had many discussions around removing that catalog
altogether. Use a nearby temp table instead, to make these two test
scripts more self-contained. This is a better test case anyway, since
it exercises the scenario where the entries in the anyarray column
actually vary in type intra-query.
FD_SETSIZE is included in sys/select.h per POSIX, and this header
inclusion has been moved to scripts_parallel.c as of 5f38403 without
moving the variable, causing a compilation failure on recent versions of
OpenBSD (6.6 was the version used in the report).
In order to take care of the failure, move FD_SETSIZE directly to
scripts_parallel.c with a wrapper controlling the maximum number of
parallel slots supported, based on a suggestion by Andres Freund.
While on it, reduce the maximum number to be less than FD_SETSIZE,
leaving some room for stdin, stdout and such as they consume some file
descriptors.
The buildfarm did not complain about that, as it happens to only be
an issue on recent versions of OpenBSD and there is no coverage in this
area. 51c3e9f fixed a similar set of issues.
Bug: #15964
Reported-by: Sean Farrell
Discussion: https://postgr.es/m/15964-c1753bdfed722e04@postgresql.org
If the record argument is NULL and has no declared type more concrete
than RECORD, we can't extract useful information about the desired
rowtype from it. In this case, see if we're in FROM with an AS clause,
and if so extract the needed rowtype info from AS.
It worked like this before v11, but commit 37a795a60 removed the
behavior, reasoning that it was undocumented, inefficient, and utterly
not self-consistent. If you want to take type info from an AS clause,
you should be using the json_to_record() family of functions not the
json_populate_record() family. Also, it was already the case that
the "populate" functions would fail for a null-valued RECORD input
(with an unfriendly "record type has not been registered" error)
when there wasn't an AS clause at hand, and it wasn't obvious that
that behavior wasn't OK when there was one. However, it emerges
that some people were depending on this to work, and indeed the
rather off-point error message you got if you left off AS encouraged
slapping on AS without switching to the json_to_record() family.
Hence, put back the fallback behavior of looking for AS. While at it,
improve the run-time error you get when there's no place to obtain type
info; we can do a lot better than "record type has not been registered".
(We can't, unfortunately, easily improve the parse-time error message
that leads people down this path in the first place.)
While at it, I refactored the code a bit to avoid duplicating the
same logic in several different places.
Per bug #15940 from Jaroslav Sivy. Back-patch to v11 where the
current coding came in. (The pre-v11 deficiencies in this area
aren't regressions, so we'll leave those branches alone.)
Patch by me, based on preliminary analysis by Dmitry Dolgov.
Discussion: https://postgr.es/m/15940-2ab76dc58ffb85b6@postgresql.org
We already had "cpluspluscheck", which served the dual purposes of
verifying that headers compile standalone and that they compile as C++.
However, C++ compilers don't have the exact same set of error conditions
as C compilers, so this doesn't really prove that a header will compile
standalone as C.
Hence, add a second script that's largely similar but runs the C
compiler not C++.
Also add a bit more documentation than the none-at-all we had before.
Discussion: https://postgr.es/m/14803.1566175851@sss.pgh.pa.us
IANA tzcode release 2019b adds an option that tells zic not to emit
the old 32-bit section of the timezone files, and to skip some other
space-wasting hacks needed for compatibility with old timezone client
libraries. Since we only expect our own code to use the timezone data
we install, and our code is up-to-date with 2019b, there's no apparent
reason not to generate the smallest possible files.
Unfortunately, while the individual zone files do get significantly
smaller in many cases, they were not that big to begin with; which
means that no real space savings ensues on filesystems that don't
optimize small files. (For instance, on ext4 with 4K block size,
"du" says the installed timezone tree is the same size as before.)
Still, it seems worth making the change, if only because this is
presumably the wave of the future. At the very least, we'll save
some cycles while reading a zone file.
But given the marginal value and the fact that this is a new code
path, it doesn't seem worth the risk of back-patching this change
into stable branches. Hence, unlike most of our timezone-related
changes, apply to HEAD only.
Discussion: https://postgr.es/m/24998.1563403327@sss.pgh.pa.us
Prefix inet_net_ntop and sibling routines with "pg_" to ensure that
they aren't mistaken for C-library functions. This fixes warnings
from cpluspluscheck on some platforms, and should help reduce reader
confusion everywhere, since our functions aren't exactly interchangeable
with the library versions (they may have different ideas about address
family codes).
This shouldn't be fixing any actual bugs, unless somebody's linker
is misbehaving, so no need to back-patch.
Discussion: https://postgr.es/m/20518.1559494394@sss.pgh.pa.us
Remove use of "register" keyword in hashfn.c. It's obsolescent
according to recent C++ compilers, and no modern C compiler pays
much attention to it either.
Also fix one cosmetic warning about signed vs unsigned comparison.
Discussion: https://postgr.es/m/20518.1559494394@sss.pgh.pa.us
This has to have <time.h>, or the references to "struct tm" don't
mean what they should.
We have some other recently-introduced issues of the same ilk,
but this one seems old. No backpatch though, as it's only a
latent problem for most purposes.
If a table inherits from multiple unrelated parents, we must disallow
changing the type of a column inherited from multiple such parents, else
it would be out of step with the other parents. However, it's possible
for the column to ultimately be inherited from just one common ancestor,
in which case a change starting from that ancestor should still be
allowed. (I would not be excited about preserving that option, were
it not that we have regression test cases exercising it already ...)
It's slightly annoying that this patch looks different from the logic
with the same end goal in renameatt(), and more annoying that it
requires an extra syscache lookup to make the test. However, the
recursion logic is quite different in the two functions, and a
back-patched bug fix is no place to be trying to unify them.
Per report from Manuel Rigger. Back-patch to 9.5. The bug exists in
9.4 too (and doubtless much further back); but the way the recursion
is done in 9.4 is a good bit different, so that substantial refactoring
would be needed to fix it in 9.4. I'm disinclined to do that, or risk
introducing new bugs, for a bug that has escaped notice for this long.
Discussion: https://postgr.es/m/CA+u7OA4qogDv9rz1HAb-ADxttXYPqQdUdPY_yd4kCzywNxRQXA@mail.gmail.com
This test failed fairly reproducibly on some CLOBBER_CACHE_ALWAYS
buildfarm animals. The cause seems to be that if a parallel worker
is slow enough to reach its lock wait, it may not be released by
the first deadlock check run, and then later deadlock checks might
decide to unblock the d2 session instead of the d1 session, leaving
us in an undetected deadlock state (since the isolationtester client
is waiting for d1 to complete first).
Fix by introducing an additional lock wait at the end of the d2a1
step, ensuring that the deadlock checker will recognize that d1
has to be unblocked before d2a1 completes.
Also reduce max_parallel_workers_per_gather to 3 in this test. With the
default max_worker_processes value, we were only getting one parallel
worker for the d2a1 step, which is not the case I hoped to test. We
should get 3 for d1a2 and 2 for d2a1, as the code stands; and maybe 3
for d2a1 if somebody figures out why the last parallel worker slot isn't
free already.
Discussion: https://postgr.es/m/22195.1566077308@sss.pgh.pa.us
If an assertion expression contained a macro, the failed assertion
message would print the expanded macro, which is usually unhelpful and
confusing. Restructure the Assert macros to not expand any macros
when constructing the failure message.
This also fixes that the existing output for Assert et al. shows
the *inverted* condition, which is also confusing and not how
assertions usually work.
Discussion: https://www.postgresql.org/message-id/flat/6c68efe3-117a-dcc1-73d4-18ba1ec532e2%402ndquadrant.com
For most uses of acl.h the details of how "Acl" internally looks like
are irrelevant. It might make sense to move a lot of the
implementation details into a separate header at a later point.
The main motivation of this change is to avoid including fmgr.h (via
array.h, which needs it for exposed structs) in a lot of files that
otherwise don't need it. A subsequent commit will remove the fmgr.h
include from a lot of files.
Directly include utils/array.h and utils/expandeddatum.h from the
files that need them, but previously included them indirectly, via
acl.h.
Author: Andres Freund
Discussion: https://postgr.es/m/20190803193733.g3l3x3o42uv4qj7l@alap3.anarazel.de
This is a variant of the problem fixed in commit 25b692568, which
unfortunately we failed to detect at the time. If an update trigger
returns the "old" tuple, as it's entitled to do, then a subsequent
iteration of the loop in ExecBRUpdateTriggers would have "oldtuple"
equal to "trigtuple" and would fail to notice that it shouldn't
free that.
In addition to fixing the code, extend the test case added by
25b692568 so that it covers multiple-trigger-iterations cases.
This problem does not manifest in v12/HEAD, as a result of the
relevant code having been largely rewritten for slotification.
However, include the test case into v12/HEAD anyway, since this
is clearly an area that someone could break again in future.
Per report from Piotr Gabriel Kosinski. Back-patch into all
supported branches, since the bug seems quite old.
Diagnosis and code fix by Thomas Munro, test case by me.
Discussion: https://postgr.es/m/CAFMLSdP0rd7LqC3j-H6Fh51FYSt5A10DDh-3=W4PPc4LLUQ8YQ@mail.gmail.com
Commit 4b93f5799 rearranged things in plpgsql to make it cope better with
composite types changing underneath it intra-session. However, I failed to
consider the case of a composite type being dropped and recreated entirely.
In my defense, the previous coding didn't consider that possibility at all
either --- but it would accidentally work so long as you didn't change the
type's field list, because the built-at-compile-time list of component
variables would then still match the type's new definition. The new
coding, however, occasionally tries to re-look-up the type by OID, and
then fails to find the dropped type.
To fix this, we need to save the TypeName struct, and then redo the type
OID lookup from that. Of course that's expensive, so we don't want to do
it every time we need the type OID. This can be fixed in the same way that
4b93f5799 dealt with changes to composite types' definitions: keep an eye
on the type's typcache entry to see if its tupledesc has been invalidated.
(Perhaps, at some point, this mechanism should be generalized so it can
work for non-composite types too; but for now, plpgsql only tries to
cope with intra-session redefinitions of composites.)
I'm slightly hesitant to back-patch this into v11, because it changes
the contents of struct PLpgSQL_type as well as the signature of
plpgsql_build_datatype(), so in principle it could break code that is
poking into the innards of plpgsql. However, the only popular extension
of that ilk is pldebugger, and it doesn't seem to be affected. Since
this is a regression for people who were relying on the old behavior,
it seems worth taking the small risk of causing compatibility issues.
Per bug #15913 from Daniel Fiori. Back-patch to v11 where 4b93f5799
came in.
Discussion: https://postgr.es/m/15913-a7e112e16dedcffc@postgresql.org
Previously, async.c got rid of duplicate notifications by scanning
the list of pending events to compare each one to the proposed new
event. This works okay for very small numbers of distinct events,
but degrades as O(N^2) for many events. We can improve matters by
using a hash table to probe for duplicates. So as not to add a
lot of overhead for the simple cases that the code did handle well
before, create the hash table only once a (sub)transaction has
queued more than 16 distinct notify events.
A downside is that we now have to do per-event work to propagate
a successful subtransaction's notify events up to its parent.
(But this isn't significant unless the subtransaction had many
events, in which case the O(N^2) behavior would have been in
play already, so we still come out ahead.)
We can make some lemonade out of this lemon, though: since we must
examine each event anyway, it's now possible to de-duplicate events
fully, rather than skipping that for events merged up from
subtransactions. Hence, remove the old weasel wording in notify.sgml
about whether de-duplication happens or not, and adjust the test
case in async-notify.spec that exhibited the old behavior.
While at it, rearrange the definition of struct Notification to make
it more compact and require just one palloc per event, rather than
two or three. This saves space when there are a lot of events,
in fact more than enough to buy back the space needed for the hash
table.
Patch by me, based on discussions around a different patch
submitted by Filip Rembiałkowski.
Discussion: https://postgr.es/m/17822.1564186806@sss.pgh.pa.us
ALTER SYSTEM itself normally won't make duplicate entries (although
up till this patch, it was possible to confuse it by writing case
variants of a GUC's name). However, if some external tool has appended
entries to the file, that could result in duplicate entries for a single
GUC name. In such a situation, ALTER SYSTEM did exactly the wrong thing,
because it replaced or removed only the first matching entry, leaving
the later one(s) still there and hence still determining the active value.
This patch fixes that by making ALTER SYSTEM sweep through the file and
remove all matching entries, then (if not ALTER SYSTEM RESET) append the
new setting to the end. This means entries will be in order of last
setting rather than first setting, but that shouldn't hurt anything.
Also, make the comparisons case-insensitive so that the right things
happen if you do, say, ALTER SYSTEM SET "TimeZone" = 'whatever'.
This has been broken since ALTER SYSTEM was invented, so back-patch
to all supported branches.
Ian Barwick, with minor mods by me
Discussion: https://postgr.es/m/aed6cc9f-98f3-2693-ac81-52bb0052307e@2ndquadrant.com
The initial value of the nbtree stack downlink block number field
recorded during an initial descent of the tree wasn't actually used.
Both _bt_getstackbuf() callers overwrote the value with their own value.
Remove the block number field from the stack struct, and add a child
block number argument to _bt_getstackbuf() in its place. This makes the
overall design of _bt_getstackbuf() clearer.
Author: Peter Geoghegan
Reviewed-By: Anastasia Lubennikova
Discussion: https://postgr.es/m/CAH2-Wzmx+UbXt2YNOUCZ-a04VdXU=S=OHuAuD7Z8uQq-PXTYUg@mail.gmail.com
This is a fix similar to 2d7d67cc, where slight plan alteration can
cause a random failure of this regression test because of an incorect
tuple ordering, except that this one involves lookups of pg_type.
Similarly to the other case, add ORDER BY clauses to ensure the output
order.
The failure has been seen at least once on buildfarm member skink.
Reported-by: Thomas Munro
Discussion: https://postgr.es/m/CA+hUKGLjR9ZBvhXcr9b-NSBHPw9aRgbjyzGE+kqLsT4vwX+nkQ@mail.gmail.com
Backpatch-through: 12
Commit d2086b08b0 removed almost all cases where nbtree must release a
read buffer lock and acquire a write buffer lock instead, so remaining
cases in which that's still necessary are not notable enough to appear
in the nbtree README.
More importantly, holding on to a buffer pin in cases where nbtree must
trade a read lock for a write lock is very unlikely to save any I/O.
This seems to have been a long overlooked throwback to a time when
nbtree cared about write-ordering dependencies, and performed
synchronous buffer writes. It hasn't worked that way in many years.
Commit 07b39083c inserted an unconditional reference to pg_opfamily,
which of course fails on servers predating that catalog. Fortunately,
the case it's trying to solve can't occur on such old servers (AFAIK).
Hence, just skip the additional code when the source predates 8.3.
Per bug #15955 from sly. Back-patch to all supported branches,
like the previous patch.
Discussion: https://postgr.es/m/15955-1daa2e676e903d87@postgresql.org
Use the PageIndexTupleOverwrite() bufpage.c routine within nbtree
instead of deleting a tuple and re-inserting its replacement. This
makes the intent of affected code slightly clearer. It also makes
CREATE INDEX slightly faster, since there is no longer a need to shift
every leaf page's line pointer array back and forth during index builds.
Author: Peter Geoghegan, Anastasia Lubennikova
Reviewed-By: Anastasia Lubennikova
Discussion: https://postgr.es/m/CAH2-Wz=Zk=B9+Vwm376WuO7YTjFc2SSskifQm4Nme3RRRPtOSQ@mail.gmail.com
We only need to invoke constraint exclusion on partitioned tables when
they are a partition, and they themselves contain a default partition;
it's not necessary otherwise, and it's expensive, so avoid it. Also, we
were trying once for each clause separately, but we can do it for all
the clauses at once.
While at it, centralize setting of RelOptInfo->partition_qual instead of
computing it in slightly different ways in different places.
Per complaints from Simon Riggs about 4e85642d935e; reviewed by Yuzuko
Hosoya, Kyotaro Horiguchi.
Author: Amit Langote. I (Álvaro) again mangled the patch somewhat.
Discussion: https://postgr.es/m/CANP8+j+tMCY=nEcQeqQam85=uopLBtX-2vHiLD2bbp7iQQUKpA@mail.gmail.com
This test case could fail because of an incorrect result ordering when
looking up at pg_class entries. This commit adds an ORDER BY to the
culprit query. The cause of the failure was likely caused by a plan
switch. By default, the planner would likely choose an index-only scan
or an index scan, but even a small change in the startup cost could have
caused a bitmap heap scan to be chosen, causing the failure.
While on it, switch some filtering quals to a regular expression as per
an idea of Tom Lane. As previously shaped, the quals would have
selected any relations whose name begins with "temp". And that could
cause failures if another test running in parallel began to use similar
relation names.
Per report from buildfarm member anole, though the failure was very
rare. This test has been introduced by 319a810, so backpatch down to
v10.
Discussion: https://postgr.es/m/20190807132422.GC15695@paquier.xyz
Backpatch-through: 10
As coded, the ICU-collation path in pattern_char_isalpha() failed
to consider regular ASCII letters to be case-varying. This led to
like_fixed_prefix treating too much of an ILIKE pattern as being a
fixed prefix, so that indexscans derived from an ILIKE clause might
miss entries that they should find.
Per bug #15892 from James Inform. This is an oversight in the original
ICU patch (commit eccfef81e), so back-patch to v10 where that came in.
Discussion: https://postgr.es/m/15892-e5d2bea3e8a04a1b@postgresql.org
Now that list_nth is O(1), there's no good reason to maintain a
separate array of RTE pointers rather than indexing into
estate->es_range_table. Deleting the array doesn't save all that
much either; but just on cleanliness grounds, it's better not to
have duplicate representations of the identical information.
Discussion: https://postgr.es/m/14960.1565384592@sss.pgh.pa.us
In the wake of commit 1cff1b95a, the result of list_concat no longer
shares the ListCells of the second input. Therefore, we can replace
"list_concat(x, list_copy(y))" with just "list_concat(x, y)".
To improve call sites that were list_copy'ing the first argument,
or both arguments, invent "list_concat_copy()" which produces a new
list sharing no ListCells with either input. (This is a bit faster
than "list_concat(list_copy(x), y)" because it makes the result list
the right size to start with.)
In call sites that were not list_copy'ing the second argument, the new
semantics mean that we are usually leaking the second List's storage,
since typically there is no remaining pointer to it. We considered
inventing another list_copy variant that would list_free the second
input, but concluded that for most call sites it isn't worth worrying
about, given the relative compactness of the new List representation.
(Note that in cases where such leakage would happen, the old code
already leaked the second List's header; so we're only discussing
the size of the leak not whether there is one. I did adjust two or
three places that had been troubling to free that header so that
they manually free the whole second List.)
Patch by me; thanks to David Rowley for review.
Discussion: https://postgr.es/m/11587.1550975080@sss.pgh.pa.us
This reverts much of commit f03a9ca436,
but leaves the relpages/reltuples probe in select_parallel.sql.
The pg_stat_all_tables probes are unstable enough to be annoying,
and it no longer seems likely that they will teach us anything more
about the underlying problem. I'd still like some more confirmation
though that the observed plan instability is caused by VACUUM leaving
relpages/reltuples as zero for one of these tables.
Discussion: https://postgr.es/m/CA+hUKG+0CxrKRWRMf5ymN3gm+BECHna2B-q1w8onKBep4HasUw@mail.gmail.com
We have implemented jsonpath string comparison using default database locale.
However, standard requires us to compare Unicode codepoints. This commit
implements that, but for performance reasons we still use per-byte comparison
for "==" operator. Thus, for consistency other comparison operators do per-byte
comparison if Unicode codepoints appear to be equal.
In some edge cases, when same Unicode codepoints have different binary
representations in database encoding, we diverge standard to achieve better
performance of "==" operator. In future to implement strict standard
conformance, we can do normalization of input JSON strings.
Original patch was written by Nikita Glukhov, rewritten by me.
Reported-by: Markus Winand
Discussion: https://postgr.es/m/8B7FA3B4-328D-43D7-95A8-37B8891B8C78%40winand.at
Author: Nikita Glukhov, Alexander Korotkov
Backpatch-through: 12
This failed with either "tuple already updated by self" or "duplicate
key value violates unique constraint", depending on whether the table
had previously been analyzed or not. The reason is that ANALYZE tried
to insert or update the same pg_statistic rows twice, and there was no
CommandCounterIncrement between. So add one. The same case works fine
outside a transaction block, because then there's a whole transaction
boundary between, as a consequence of the way VACUUM works.
This issue has been latent all along, but the problem was unreachable
before commit 11d8d72c2 added the ability to specify multiple tables
in ANALYZE. We could, perhaps, alternatively fix it by adding code to
de-duplicate the list of VacuumRelations --- but that would add a
lot of overhead to work around dumb commands, so it's not attractive.
Per bug #15946 from Yaroslav Schekin. Back-patch to v11.
(Note: in v11 I also back-patched the test added by commit 23224563d;
otherwise the problem doesn't manifest in the test I added, because
"vactst" is empty when the tests for multiple ANALYZE targets are
reached. That seems like not a very good thing anyway, so I did this
rather than rethinking the choice of test case.)
Discussion: https://postgr.es/m/15946-5c7570a2884a26cf@postgresql.org
Rename the "tupindex" field from tuplesort.c's SortTuple struct to
"srctape", since it can only ever be used to store a source/input tape
number when merging external sort runs. This has been the case since
commit 8b304b8b72, which removed replacement selection sort from
tuplesort.c.
Merge setup_append_rel_array into setup_simple_rel_arrays. There's no
particularly good reason to keep them separate, and it's inconsistent
with the lack of separation in expand_planner_arrays. The only apparent
benefit was that the fast path for trivial queries in query_planner()
doesn't need to set up the append_rel_array; but all we're saving there
is an if-test and NULL assignment, which surely ought to be negligible.
Also improve some obsolete comments.
Discussion: https://postgr.es/m/17220.1565301350@sss.pgh.pa.us
b654714 has reworked the way trailing CR/LF characters are removed from
strings. This commit introduces a new routine in common/string.c and
refactors the code so as the logic is in a single place, mostly.
Author: Michael Paquier
Reviewed-by: Bruce Momjian
Discussion: https://postgr.es/m/20190801031820.GF29334@paquier.xyz
READTUP() routines do not and cannot use the resettable "tuplecontext"
memory context, since it is deleted when merging begins. Update an
obsolete comment that claimed otherwise. This was an oversight in
commit e94568ecc1.
In passing, fix an unrelated tuplesort typo.
I left PG_CMD_PUTS around even though it could be handled by
PG_CMD_PRINTF since PG_CMD_PUTS is sometimes called with non-literal
arguments, and so that would create a potential problem if such a
string contained percent signs.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
We were applying constraint exclusion on the partition constraint when
generating pruning steps for a clause, but only for the rather
restricted situation of them being boolean OR operators; however it is
possible to have differently shaped clauses that also benefit from
constraint exclusion. This applies particularly to the default
partition since their constraints are in essence a long list of OR'ed
subclauses ... but it applies to other cases too. So in certain cases
we're scanning partitions that we don't need to.
Remove the specialized code in OR clauses, and add a generally
applicable test of the clause refuting the partition constraint; mark
the whole pruning operation as contradictory if it hits.
This has the unwanted side-effect of testing some (most? all?)
constraints more than once if constraint_exclusion=on. That seems
unavoidable as far as I can tell without some additional work, but
that's not the recommended setting for that parameter anyway.
However, because this imposes additional processing cost for all
queries using partitioned tables, I decided not to backpatch this
change.
Author: Amit Langote, Yuzuko Hosoya, Álvaro Herrera
Reviewers: Shawn Wang, Thibaut Madeleine, Yoshikazu Imai, Kyotaro
Horiguchi; they were also uncredited reviewers for commit 489247b0e6.
Discussion: https://postgr.es/m/9bb31dfe-b0d0-53f3-3ea6-e64b811424cf@lab.ntt.co.jp
In serializable mode, heap_hot_search_buffer() incorrectly acquired a
predicate lock on the root tuple, not the returned tuple that satisfied
the visibility checks. As explained in README-SSI, the predicate lock does
not need to be copied or extended to other tuple versions, but for that to
work, the correct, visible, tuple version must be locked in the first
place.
The original SSI commit had this bug in it, but it was fixed back in 2013,
in commit 81fbbfe335. But unfortunately, it was reintroduced a few months
later in commit b89e151054. Wising up from that, add a regression test
to cover this, so that it doesn't get reintroduced again. Also, move the
code that sets 't_self', so that it happens at the same time that the
other HeapTuple fields are set, to make it more clear that all the code in
the loop operate on the "current" tuple in the chain, not the root tuple.
Bug spotted by Andres Freund, analysis and original fix by Thomas Munro,
test case and some additional changes to the fix by Heikki Linnakangas.
Backpatch to all supported versions (9.4).
Discussion: https://www.postgresql.org/message-id/20190731210630.nqhszuktygwftjty%40alap3.anarazel.de
When parsing a timetz string with a dynamic timezone abbreviation or a
timezone not specified, it was possible to generate incorrect timestamps
based on a date which uses some non-initialized variables if the input
string did not specify fully a date to parse. This is already checked
when a full timezone spec is included in the input string, but the two
other cases mentioned above missed the same checks.
This gets fixed by generating an error as this input is invalid, or in
short when a date is not fully specified.
Valgrind was complaining about this problem.
Bug: #15910
Author: Alexander Lakhin
Discussion: https://postgr.es/m/15910-2eba5106b9aa0c61@postgresql.org
Backpatch-through: 9.4
As of now, logical decoding of a multi-insert has been scanning all
xl_multi_insert_tuple entries only if XLH_INSERT_CONTAINS_NEW_TUPLE was
getting set in the record. This is not an issue on HEAD as multi-insert
records are not used for system catalogs, but the logical decoding logic
includes all the code necessary to handle that properly, except that the
code missed to iterate correctly over all xl_multi_insert_tuple entries
when the flag is not set. Hence, when trying to use multi-insert for
system catalogs, an assertion would be triggered.
An upcoming patch is going to make use of multi-insert for system
catalogs, and this fixes the logic to make sure that all entries are
scanned correctly without softening the existing assertions.
Reported-by: Daniel Gustafsson
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/CBFFD532-C033-49EB-9A5A-F67EAEE9EB0B@yesql.se
src/test/kerberos and src/test/ldap try to run private authentication
servers, which of course might fail. The logs from these servers
were being dropped into the tmp_check/ subdirectory, but they should
be put in tmp_check/log/, because the buildfarm will only capture
log files in that subdirectory. Without the log output there's
little hope of diagnosing buildfarm failures related to these servers.
Backpatch to v11 where these test suites were added.
Discussion: https://postgr.es/m/16017.1565047605@sss.pgh.pa.us
Commit a6417078 established a new project policy around OID assignment:
new patches are encouraged to choose a random OID in the 8000..9999
range when a manually-assigned OID is required (if multiple OIDs are
required, a consecutive block of OIDs starting from the random point
should be used). Catalog entries added by committed patches that use
OIDs from this "unstable" range are renumbered after feature freeze.
This practice minimizes OID collisions among concurrently-developed
patches.
Show a specific random OID suggestion when the unused_oids script is
run. This makes it easy for patch authors to use a random OID from the
unstable range, per the new policy.
Author: Julien Rouhaud, Peter Geoghegan
Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/CAH2-WzkkRs2ScmuBQ7xWi7xzp7fC1B3w0Nt8X+n4rBw5k+Z=zA@mail.gmail.com
Commit bf6c614a2 rearranged the lookup of the comparison operators
needed in a hashed subplan, and in so doing, broke the cross-type
case: it caused the original LHS-vs-RHS operator to be used to compare
hash table entries too (which of course are all of the RHS type).
This leads to C functions being passed a Datum that is not of the
type they expect, with the usual hazards of crashes and unauthorized
server memory disclosure.
For the set of hashable cross-type operators present in v11 core
Postgres, this bug is nearly harmless on 64-bit machines, which
may explain why it escaped earlier detection. But it is a live
security hazard on 32-bit machines; and of course there may be
extensions that add more hashable cross-type operators, which
would increase the risk.
Reported by Andreas Seltenreich. Back-patch to v11 where the
problem came in.
Security: CVE-2019-10209
Commit aa27977fe2 introduced this
restriction for pg_temp.function_name(arg); do likewise for types
created in temporary schemas. Programs that this breaks should add
"pg_temp." schema qualification or switch to arg::type_name syntax.
Back-patch to 9.4 (all supported versions).
Reviewed by Tom Lane. Reported by Tom Lane.
Security: CVE-2019-10208
Those data types use parsing and/or calculation wrapper routines which
can generate some generic error messages in the event of a failure. The
caller of these routines can also pass a pointer variable settable by
the routine to track if an error has happened, letting the caller decide
what to do in the event of an error and what error message to generate.
Those routines have been slacking the initialization of the tracking
flag, which can be confusing when reading the code, so add some
safeguards against calls of these parsing routines which could lead to a
dubious result.
The LSN parsing gains an assertion to make sure that the tracking flag
is set, while numeric and float paths initialize the flag to a saner
state.
Author: Jeevan Ladhe
Reviewed-by: Álvaro Herrera, Michael Paquier
Discussion: https://postgr.es/m/CAOgcT0NOM9oR0Hag_3VpyW0uF3iCU=BDUFSPfk9JrWXRcWQHqw@mail.gmail.com
This reverts commit 88bdbd3f74.
As committed, statement sampling used the existing duration threshold
(log_min_duration_statement) when decide which statements to sample.
The issue is that even the longest statements are subject to sampling,
and so may not end up logged. An improvement was proposed, introducing
a second duration threshold, but it would not be backwards compatible.
So we've decided to revert this feature - the separate threshold should
be part of the feature itself.
Discussion: https://postgr.es/m/CAFj8pRDS8tQ3Wviw9%3DAvODyUciPSrGeMhJi_WPE%2BEB8%2B4gLL-Q%40mail.gmail.com
This reverts commit 9dc1225855.
As committed, statement sampling used the existing duration threshold
(log_min_duration_statement) when decide which statements to sample.
The issue is that even the longest statements are subject to sampling,
and so may not end up logged. An improvement was proposed, introducing
a second duration threshold, but it would not be backwards compatible.
So we've decided to revert this feature - the separate threshold should
be part of the feature itself.
Discussion: https://postgr.es/m/CAFj8pRDS8tQ3Wviw9%3DAvODyUciPSrGeMhJi_WPE%2BEB8%2B4gLL-Q%40mail.gmail.com
src/test/kerberos and src/test/ldap need to run a private authentication
server of the relevant type, for which they need a free TCP port.
They were just picking a random port number in 48K-64K, which works
except when something's already using the particular port. Notably,
the probability of failure rises dramatically if one simply runs those
tests in a tight loop, because each test cycle leaves behind a bunch of
high ports that are transiently in TIME_WAIT state.
To fix, split out the code that PostgresNode.pm already had for
identifying a free TCP port number, so that it can be invoked to choose
a port for the KDC or LDAP server. This isn't 100% bulletproof, since
conceivably something else on the machine could grab the port between
the time we check and the time we actually start the server. But that's
a pretty short window, so in practice this should be good enough.
Back-patch to v11 where these test suites were added.
Patch by me, reviewed by Andrew Dunstan.
Discussion: https://postgr.es/m/3397.1564872168@sss.pgh.pa.us
When querying a partitioned table containing a default partition, we
were wrongly deciding to include it in the scan too early in the
process, failing to exclude it in some cases. If we reinterpret the
PruneStepResult.scan_default flag slightly, we can do a better job at
detecting that it can be excluded. The change is that we avoid setting
the flag for that pruning step unless the step absolutely requires the
default partition to be scanned (in contrast with the previous
arrangement, which was to set it unless the step was able to prune it).
So get_matching_partitions() must explicitly check the partition that
each returned bound value corresponds to in order to determine whether
the default one needs to be included, rather than relying on the flag
from the final step result.
Author: Yuzuko Hosoya <hosoya.yuzuko@lab.ntt.co.jp>
Reviewed-by: Amit Langote <Langote_Amit_f8@lab.ntt.co.jp>
Discussion: https://postgr.es/m/00e601d4ca86$932b8bc0$b982a340$@lab.ntt.co.jp
This portion of the code got forgotten in 7cce159 which has introduced a
new routine to build this node, and this finishes the unification of the
places where IndexInfo is initialized.
Author: Michael Paquier
Discussion: https://postgr.es/m/20190801041322.GA3435@paquier.xyz
In 5f32b29c18 I changed the creation of HashState.hashkeys to
actually use HashState as the parent (instead of HashJoinState, which
was incorrect, as they were executed below HashState), to fix the
problem of hashkeys expressions otherwise relying on slot types
appropriate for HashJoinState, rather than HashState as would be
correct. That reliance was only introduced in 12, which is why it
previously worked to use HashJoinState as the parent (although I'd be
unsurprised if there were problematic cases).
Unfortunately that's not a sufficient solution, because before this
commit, the to-be-hashed expressions referenced inner/outer as
appropriate for the HashJoin, not Hash. That didn't have obvious bad
consequences, because the slots containing the tuples were put into
ecxt_innertuple when hashing a tuple for HashState (even though Hash
doesn't have an inner plan).
There are less common cases where this can cause visible problems
however (rather than just confusion when inspecting such executor
trees). E.g. "ERROR: bogus varno: 65000", when explaining queries
containing a HashJoin where the subsidiary Hash node's hash keys
reference a subplan. While normally hashkeys aren't displayed by
EXPLAIN, if one of those expressions references a subplan, that
subplan may be printed as part of the Hash node - which then failed
because an inner plan was referenced, and Hash doesn't have that.
It seems quite possible that there's other broken cases, too.
Fix the problem by properly splitting the expression for the HashJoin
and Hash nodes at plan time, and have them reference the proper
subsidiary node. While other workarounds are possible, fixing this
correctly seems easy enough. It was a pretty ugly hack to have
ExecInitHashJoin put the expression into the already initialized
HashState, in the first place.
I decided to not just split inner/outer hashkeys inside
make_hashjoin(), but also to separate out hashoperators and
hashcollations at plan time. Otherwise we would have ended up having
two very similar loops, one at plan time and the other during executor
startup. The work seems to more appropriately belong to plan time,
anyway.
Reported-By: Nikita Glukhov, Alexander Korotkov
Author: Andres Freund
Reviewed-By: Tom Lane, in an earlier version
Discussion: https://postgr.es/m/CAPpHfdvGVegF_TKKRiBrSmatJL2dR9uwFCuR+teQ_8tEXU8mxg@mail.gmail.com
Backpatch: 12-
Add _lookup_hash and _insert_hash functions for callers that have
already calculated the hash value of the key.
The immediate use case is for hash algorithms that write to disk in
partitions. The hash value can be calculated once, used to perform a
lookup, used to select the partition, then written to the partition
along with the tuple. When the tuple is read back, the hash value does
not need to be recalculated.
Author: Jeff Davis
Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/48abe675e1330f0c264ab2fe0d4ff23eb244f9ef.camel%40j-davis.com
This allows simplification of the plan tree in some common usage
patterns: we can get rid of a join to the function RTE.
In principle we could pull up any immutable expression, but restricting
it to Consts avoids the risk that multiple evaluations of the expression
might cost more than we can save. (Possibly this could be improved in
future --- but we've more or less promised people that putting a function
in FROM guarantees single evaluation, so we'd have to tread carefully.)
To do this, we need to rearrange when eval_const_expressions()
happens for expressions in function RTEs. I moved it to
inline_set_returning_functions(), which already has to iterate over
every function RTE, and in consequence renamed that function to
preprocess_function_rtes(). A useful consequence is that
inline_set_returning_function() no longer has to do this for itself,
simplifying that code.
In passing, break out pull_up_simple_subquery's code that knows where
everything that needs pullup_replace_vars() processing is, so that
the new pull_up_constant_function() routine can share it. We'd
gotten away with one-and-a-half copies of that code so far, since
pull_up_simple_values() could assume that a lot of cases didn't apply
to it --- but I don't think pull_up_constant_function() can make any
simplifying assumptions. Might as well make pull_up_simple_values()
use it too.
(Possibly this refactoring should go further: maybe we could share
some of the code to fill in the pullup_replace_vars_context struct?
For now, I left it that the callers fill that completely.)
Note: the one existing test case that this patch changes has to be
changed because inlining its function RTEs would destroy the point
of the test, namely to check join order.
Alexander Kuzmenkov and Aleksandr Parfenov, reviewed by
Antonin Houska and Anastasia Lubennikova, and whacked around
some more by me
Discussion: https://postgr.es/m/402356c32eeb93d4fed01f66d6c7fe2d@postgrespro.ru
Add sort support for inet, including support for abbreviated keys.
Testing has shown that this reduces the time taken to sort medium to
large inet/cidr inputs by ~50-60% in realistic cases.
Author: Brandur Leach
Reviewed-By: Peter Geoghegan, Edmund Horner
Discussion: https://postgr.es/m/CABR_9B-PQ8o2MZNJ88wo6r-NxW2EFG70M96Wmcgf99G6HUQ3sw@mail.gmail.com
Commit a1c1af2a1 added logic in the deadlock checker to handle lock
grouping, but it was very poorly tested, as evidenced by the bug
fixed in 3420851a2. Add a test case that exercises that a bit better
(and catches the bug --- if you revert 3420851a2, this will hang).
Since it's pretty hard to get parallel workers to take exclusive
regular locks that their parents don't already have, this test operates
by creating a deadlock among advisory locks taken in parallel workers.
To make that happen, we must override the parallel-safety labeling of
the advisory-lock functions, which we do by putting them in mislabeled,
non-inlinable wrapper functions.
We also have to remove the redundant PreventAdvisoryLocksInParallelMode
checks in lockfuncs.c. That seems fine though; if some user accidentally
does what this test is intentionally doing, not much harm will ensue.
(If there are any remaining bugs that are reachable that way, they're
probably reachable in other ways too.)
Discussion: https://postgr.es/m/3243.1564437314@sss.pgh.pa.us
There seems no good reason not to allow a parallel leader to execute
these functions. (The workers still can't, though. Although the code
would work, any such lock would go away at worker exit, which is not
the documented behavior of advisory locks.)
Discussion: https://postgr.es/m/11847.1564496844@sss.pgh.pa.us
Since pg_dump doesn't treat the member operators and functions of operator
classes/families (that is, the pg_amop and pg_amproc entries, not the
underlying operators/functions) as separate dumpable objects, it missed
their dependency information. I think this was safe when the code was
designed, because the default object sorting rule emits operators and
functions before opclasses, and there were no dependency types that could
mess that up. However, the introduction of range types in 9.2 broke it:
now a type can have a dependency on an opclass, allowing dependency rules
to push the opclass before the type and hence before custom operators.
Lacking any information showing that it shouldn't do so, pg_dump emitted
the objects in the wrong order.
Fix by teaching getDependencies() to translate pg_depend entries for
pg_amop/amproc rows to look like dependencies for their parent opfamily.
I added a regression test for this in HEAD/v12, but not further back;
life is too short to fight with 002_pg_dump.pl.
Per bug #15934 from Tom Gottfried. Back-patch to all supported branches.
Discussion: https://postgr.es/m/15934-58b8c8ab7a09ea15@postgresql.org
The tests collate.icu.utf8 and collate.linux.utf8 were previously only
run when explicitly selected via EXTRA_TESTS. They require a UTF8
database, because the error messages in the expected files refer to
that, and they use some non-ASCII characters in the tests. Since
users can select any locale and encoding for the regression test run,
it was not possible to include these tests automatically.
To fix, use psql's \if facility to check various prerequisites such as
platform and the server encoding and quit the tests at the very
beginning if the configuration is not adequate. We then need to
maintain alternative expected files for these tests, but they are very
tiny and never need to change after this.
These two tests are now run automatically as part of the regression
tests.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/052295c2-a2e1-9a21-bd36-8fbff8686cf3%402ndquadrant.com
These were introduced by pgindent due to fixe to broken
indentation (c.f. 8255c7a5ee). Previously the mis-indentation of
function prototypes was creatively used to reduce indentation in a few
places.
As that formatting only exists in master and REL_12_STABLE, it seems
better to fix it in both, rather than having some odd indentation in
v12 that somebody might copy for future patches or such.
Author: Andres Freund
Discussion: https://postgr.es/m/20190728013754.jwcbe5nfyt3533vx@alap3.anarazel.de
Backpatch: 12-
The rd_amcache allows an index AM to cache arbitrary information in a
relcache entry. This commit moves the cleanup of rd_amcache so that it
can also be used by table AMs. Nothing takes advantage of that yet, but
I'm sure it'll come handy for anyone writing new table AMs.
Backpatch to v12, where table AM interface was introduced.
Reviewed-by: Julien Rouhaud
This has been wrong ever since pg_rewind was added. The if-branch just
above this, where we print the same error with an extra message supplied
by XLogReadRecord() got this right, but the variable name was wrong in the
else-branch. As a consequence, the error printed the WAL position as
0/0 if there was an error reading a WAL file.
Backpatch to 9.5, where pg_rewind was added.
When performing ANALYZE on inheritance trees, we collect two samples for
each relation - one for the relation alone, and one for the inheritance
subtree (relation and its child relations). And then we build statistics
on each sample, so for each relation we get two sets of statistics.
For regular (per-column) statistics this works fine, because the catalog
includes a flag differentiating statistics built from those two samples.
But we don't have such flag in the extended statistics catalogs, and we
ended up updating the same row twice, triggering this error:
ERROR: tuple already updated by self
The simplest solution is to disable extended statistics on inheritance
trees, which is what this commit is doing. In the future we may need to
do something similar to per-column statistics, but that requires adding a
flag to the catalog - and that's not backpatchable. Moreover, the current
selectivity estimation code only works with individual relations, so
building statistics on inheritance trees would be pointless anyway.
Author: Tomas Vondra
Backpatch-to: 10-
Discussion: https://postgr.es/m/20190618231233.GA27470@telsasoft.com
Reported-by: Justin Pryzby
When building a list of relations for a parallel processing of a schema
or a database (or just a single-entry list for the non-parallel case
with the database name), the list is allocated and built on-the-fly for
each database processed, leaking after one database-level reindex is
done. This accumulates leaks when processing all databases, and could
become a visible issue with thousands of relations.
This is fixed by introducing a new routine in simple_list.c to free all
the elements in a simple list made of strings or OIDs. The header of
the list may be using a variable declaration or an allocated pointer,
so we don't have a routine to free this part to keep the interface
simple.
Per report from coverity for an issue introduced by 5ab892c, and
valgrind complains about the leak as well. The idea to introduce a new
routine in simple_list.c is from Tom Lane.
Author: Michael Paquier
Reviewed-by: Tom Lane
A "break" statement erroneously left behind by commit a1c1af2a1
caused TopoSort to do the wrong thing if a lock's wait list
contained multiple members of the same locking group.
Because parallel workers don't normally need any locks not already
taken by their leader, this is very hard --- maybe impossible ---
to hit in production. Still, if it did happen, the queries involved
in an otherwise-resolvable deadlock would block until canceled.
In addition to removing the bogus "break", add an Assert showing
that the conflicting uses of the beforeConstraints[] array (for both
counts and flags) don't overlap, and add some commentary explaining
why not; because it's not obvious without explanation, IMHO.
Original report and patch from Rui Hai Jiang; additional assert
and commentary by me. Back-patch to 9.6 where the bug came in.
Discussion: https://postgr.es/m/CAEri+mLd3bpHLyW+a9pSe1y=aEkeuJpwBSwvo-+m4n7-ceRmXw@mail.gmail.com
When copying the definition of an index rebuilt concurrently for the new
entry, the index information was taken directly from the old index using
the relation cache. In this case, predicates and expressions have
some post-processing to prepare things for the planner, which loses some
information including the collations added in any of them.
This inconsistency can cause issues when attempting for example a table
rewrite, and makes the new indexes rebuilt concurrently inconsistent
with the old entries.
In order to fix the problem, fetch expressions and predicates directly
from the catalog of the old entry, and fill in IndexInfo for the new
index with that. This makes the process more consistent with
DefineIndex(), and the code is refactored with the addition of a routine
to create an IndexInfo node.
Reported-by: Manuel Rigger
Author: Michael Paquier
Discussion: https://postgr.es/m/CA+u7OA5Hp0ra235F3czPom_FyAd-3+XwSJmX95r1+sRPOJc9VQ@mail.gmail.com
Backpatch-through: 12
Early previews of LLVM 9 reveal that our Min() macro causes compiler
errors in LLVM headers reached by the #include directives in
llvmjit_inline.cpp. Let's just undefine it. Per buildfarm animal
seawasp. Back-patch to 11.
Reviewed-by: Fabien Coelho, Tom Lane
Discussion: https://postgr.es/m/20190606173216.GA6306%40alvherre.pgsql
We had no actual end-to-end test of NOTIFY message delivery. In the
core async.sql regression test, testing this is problematic because psql
traditionally prints the PID of the sending backend, making the output
unstable. We also have an isolation test script, but it likewise
failed to prove that delivery worked, because isolationtester.c had
no provisions for detecting/reporting NOTIFY messages.
Hence, add such provisions to isolationtester.c, and extend
async-notify.spec to include direct tests of basic NOTIFY functionality.
I also added tests showing that NOTIFY de-duplicates messages normally,
but not across subtransaction boundaries. (That's the historical
behavior since we introduced subtransactions, though perhaps we ought
to change it.)
Patch by me, with suggestions/review by Andres Freund.
Discussion: https://postgr.es/m/31304.1564246011@sss.pgh.pa.us
If a test sends a notice just before blocking, it's possible on
slow machines for isolationtester to detect the blocked state before
it's consumed the notice. (For this to happen, the notice would have
to arrive after isolationtester has waited for data for 10ms, so on
fast/lightly-loaded machines it's hard to reproduce the failure.)
But, if we have seen the backend as blocked, it's certainly already
sent any notices it's going to send. Therefore, one more round of
PQconsumeInput and PQisBusy should be enough to collect and process
any such notices.
This appears to explain the instability noted in commit ebd499282, so undo
the hack therein to not print notices from insert-conflict-specconflict.
Patch by me, diagnosis by Andres Freund.
Discussion: https://postgr.es/m/14616.1564251339@sss.pgh.pa.us
For its entire existence, isolationtester.c has forced client_min_messages
to WARNING, but that seems like a very poor choice of test design. It
should be up to individual test scripts to manage whether they emit notices
and to ensure that the results are stable. (There were no NOTICE messages
in the original set of isolation tests, so this was certainly dead code
when committed, but perhaps it was needed at some earlier point.)
It's possible that the original motivation was due to platform-dependent
variations in the timing of stdout vs. stderr output. That should be
moot since commits 73bcb76b7/6eda3e9c2, but just in case, adjust
isotesterNoticeProcessor to print to stdout not stderr. (stderr seems
like the wrong thing anyway: it should be for error printouts not expected
test output.)
Testing shows that the notices in insert-conflict-specconflict are indeed
a bit timing-unstable on very slow machines, so hide them; maybe we can
improve that later. Also, make the notices in plpgsql-toast a bit less
verbose than the original code would've had them.
Discussion: https://postgr.es/m/14616.1564251339@sss.pgh.pa.us
When doing a schema-level or a database-level operation, a list of
relations to build is created which gets processed in parallel using
multiple connections, based on the recent refactoring for parallel slots
in src/bin/scripts/. System catalogs are processed first in a
serialized fashion to prevent deadlocks, followed by the rest done in
parallel.
This new option is not compatible with --system as reindexing system
catalogs in parallel can lead to deadlocks, and with --index as there is
no conflict handling for indexes rebuilt in parallel depending in the
same relation.
Author: Julien Rouhaud
Reviewed-by: Sergei Kornilov, Michael Paquier
Discussion: https://postgr.es/m/CAOBaU_YrnH_Jqo46NhaJ7uRBiWWEcS40VNRQxgFbqYo9kApUsg@mail.gmail.com
Make the directory where the pg_upgrade binary resides the default for
new bindir, as running the pg_upgrade binary from where the new
cluster is installed is a very common scenario. Setting this as the
defauly bindir for the new cluster will remove the need to provide it
explicitly via -B in many cases.
To support directories being missing from option parsing, extend the
directory check with a missingOk mode where the path must be filled at
a later point before being used. Also move the exec_path check to
earlier in setup to make sure we know the new cluster bindir when we
scan for required executables.
This removes the exec_path from the OSInfo struct as it is not used
anywhere.
Author: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/9328.1552952117@sss.pgh.pa.us
pg_timezone_names() tries to avoid showing the "Factory" zone in
the view, mainly because that has traditionally had a very long
"abbreviation" such as "Local time zone must be set--see zic manual page",
so that showing it messes up psql's formatting of the whole view.
Since tzdb version 2016g, IANA instead uses the abbreviation "-00",
which is sane enough that there's no reason to discriminate against it.
On the other hand, it emerges that FreeBSD and possibly other packagers
are so wedded to backwards compatibility that they hack the IANA data
to keep the old spelling --- and not just that old spelling, but even
older spellings that IANA used back in the stone age. This caused the
filter logic to fail to suppress "Factory" at all on such platforms,
though the formatting problem is definitely real in that case.
To solve both problems, get rid of the hard-wired assumption about
exactly what Factory's abbreviation is, and instead reject abbreviations
exceeding 31 characters. This will allow Factory to appear in the view
if and only if it's using the modern abbreviation.
In passing, simplify the code we add to zic.c to support "zic -P"
to remove its now-obsolete hacks to not print the Factory zone's
abbreviation. Unlike pg_timezone_names(), there's no reason for
that code to support old/nonstandard timezone data.
Since we generally prefer to keep timezone-related behavior the
same in all branches, and since this is arguably a bug fix,
back-patch to all supported branches.
Discussion: https://postgr.es/m/3961.1564086915@sss.pgh.pa.us
Some platforms create a file named "localtime" in the system
timezone directory, making it a copy or link to the active time
zone file. If Postgres is built with --with-system-tzdata, initdb
will see that file as an exact match to localtime(3)'s behavior,
and it may decide that "localtime" is the most preferred spelling of
the active zone. That's a very bad choice though, because it's
neither informative, nor portable, nor stable if someone changes
the system timezone setting. Extend the preference logic added by
commit e3846a00c so that we will prefer any other zone file that
matches localtime's behavior over "localtime".
On the same logic, also discriminate against "posixrules", which
is another not-really-a-zone file that is often present in the
timezone directory. (Since we install "posixrules" but not
"localtime", this change can affect the behavior of Postgres
with or without --with-system-tzdata.)
Note that this change doesn't prevent anyone from choosing these
pseudo-zones if they really want to (i.e., by setting TZ for initdb,
or modifying the timezone GUC later on). It just prevents initdb
from preferring these zone names when there are multiple matches to
localtime's behavior.
Since we generally prefer to keep timezone-related behavior the
same in all branches, and since this is arguably a bug fix,
back-patch to all supported branches.
Discussion: https://postgr.es/m/CADT4RqCCnj6FKLisvT8tTPfTP4azPhhDFJqDF1JfBbOH5w4oyQ@mail.gmail.com
Discussion: https://postgr.es/m/27991.1560984458@sss.pgh.pa.us
Money values exceeding about 18 digits (depending on lc_monetary)
could be inaccurately converted to numeric, due to select_div_scale()
deciding it didn't need to compute any fractional digits. Force
its hand by setting the dscale of one division input to equal the
number of fractional digits we need.
In passing, rearrange the logic to not do useless work in locales
where money values are considered integral.
Per bug #15925 from Slawomir Chodnicki. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/15925-da9953e2674bb5c8@postgresql.org
After starting slapd, wait until it can accept a connection before
beginning the real test work. This avoids occasional test failures.
Back-patch to 11, where the LDAP tests arrived.
Author: Thomas Munro
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/20190719033013.GI1859%40paquier.xyz
Since 15d8f8312 we assert that - and since 7ef04e4d2c, 4da597edf1
rely on - the slot type for an expression's
ecxt_{outer,inner,scan}tuple not changing, unless explicitly flagged
as such. That allows to either skip deforming (for a virtual tuple
slot) or optimize the code for JIT accelerated deforming
appropriately (for other known slot types).
This assumption was sometimes violated for grouping sets, when
nodeAgg.c internally uses tuplesorts, and the child node doesn't
return a TTSOpsMinimalTuple type slot. Detect that case, and flag that
the outer slot might not be "fixed".
It's probably worthwhile to optimize this further in the future, and
more granularly determine whether the slot is fixed. As we already
instantiate per-phase transition and equal expressions, we could
cheaply set the slot type appropriately for each phase. But that's a
separate change from this bugfix.
This commit does include a very minor optimization by avoiding to
create a slot for handling tuplesorts, if no such sorts are
performed. Previously we created that slot unnecessarily in the common
case of computing all grouping sets via hashing. The code looked too
confusing without that, as the conditions for needing a sort slot and
flagging that the slot type isn't fixed, are the same.
Reported-By: Ashutosh Sharma
Author: Andres Freund
Discussion: https://postgr.es/m/CAE9k0PmNaMD2oHTEAhRyxnxpaDaYkuBYkLa1dpOpn=RS0iS2AQ@mail.gmail.com
Backpatch: 12-, where the bug was introduced in 15d8f8312
libpq failed to ignore Windows-style newlines in connection service files.
This normally wasn't a problem on Windows itself, because fgets() would
convert \r\n to just \n. But if libpq were running inside a program that
changes the default fopen mode to binary, it would see the \r's and think
they were data. In any case, it's project policy to ignore \r in text
files unconditionally, because people sometimes try to use files with
DOS-style newlines on Unix machines, where the C library won't hide that
from us.
Hence, adjust parseServiceFile() to ignore \r as well as \n at the end of
the line. In HEAD, go a little further and make it ignore all trailing
whitespace, to match what it's always done with leading whitespace.
In HEAD, also run around and fix up everyplace where we have
newline-chomping code to make all those places look consistent and
uniformly drop \r. It is not clear whether any of those changes are
fixing live bugs. Most of the non-cosmetic changes are in places that
are reading popen output, and the jury is still out as to whether popen
on Windows can return \r\n. (The Windows-specific code in pipe_read_line
seems to think so, but our lack of support for this elsewhere suggests
maybe it's not a problem in practice.) Hence, I desisted from applying
those changes to back branches, except in run_ssl_passphrase_command()
which is new enough and little-tested enough that we'd probably not have
heard about any problems there.
Tom Lane and Michael Paquier, per bug #15827 from Jorge Gustavo Rocha.
Back-patch the parseServiceFile() change to all supported branches,
and the run_ssl_passphrase_command() change to v11 where that was added.
Discussion: https://postgr.es/m/15827-e6ba53a3a7ed543c@postgresql.org
After 277cb78983 ON CONFLICT ... SET ... RETURNING failed with
ERROR: virtual tuple table slot does not have system attributes
when taking the update path, as the slot used to insert into the
table (and then process RETURNING) was defined to be a virtual slot in
that commit. Virtual slots don't support system columns except for
tableoid and ctid, as the other system columns are AM dependent.
Fix that by using a slot of the table's type. Add tests for system
column accesses in ON CONFLICT ... RETURNING.
Reported-By: Roby, bisected to the relevant commit by Jeff Janes
Author: Andres Freund
Discussion: https://postgr.es/m/73436355-6432-49B1-92ED-1FE4F7E7E100@finefun.com.au
Backpatch: 12-, where the bug was introduced in 277cb78983
describeOneTableDetails issued a partition-constraint-fetching query
for every table, even ones it knows perfectly well are not partitions.
To add insult to injury, it then proceeded to leak the empty PGresult
if the table wasn't a partition. Doing that a lot of times might
amount to a meaningful leak, so this seems like a back-patchable bug.
Fix that, and also fix a related PGresult leak in the partition-parent
case (though that leak would occur only if we got no row, which is
unexpected).
Minor code beautification too, to make this code look more like the
pre-existing code around it.
Back-patch the whole change into v12. However, the fact that we already
know whether the table is a partition dates only to commit 1af25ca0c;
back-patching the relevant changes from that is probably more churn
than is justified in released branches. Hence, in v11 and v10, just
do the minimum to fix the PGresult leaks.
Noted while messing around with adjacent code for yesterday's \d
improvements.
Otherwise, after a deleted page gets even older, it becomes unrecyclable
again. B-tree has the same problem, and has had since time immemorial,
but let's at least fix this in GiST, where this is new.
Backpatch to v12, where GiST page deletion was introduced.
Reviewed-by: Andrey Borodin
Discussion: https://www.postgresql.org/message-id/835A15A5-F1B4-4446-A711-BF48357EB602%40yandex-team.ru
The explicit check in gistScanPage() isn't currently really necessary, as
a deleted page is always empty, so the loop would fall through without
doing anything, anyway. But it's a marginal optimization, and it gives a
nice place to attach a comment to explain how it works.
Backpatch to v12, where GiST page deletion was introduced.
Reviewed-by: Andrey Borodin
Discussion: https://www.postgresql.org/message-id/835A15A5-F1B4-4446-A711-BF48357EB602%40yandex-team.ru
Windows hosts do not normally come with expr, so instead of using that
to test the \setshell command, use echo instead, which is fairly
universally available.
Backpatch to release 11, where this came in.
Problem found by me, patch by Fabien Coelho.
Slow buildfarm machines have run into issues with this TAP test caused
by a race condition related to the startup of a set of standbys, where
it is possible to finish with an unexpected order in the WAL sender
array of the primary.
This closes the race condition by making sure that any standby started
is registered into the WAL sender array of the primary before starting
the next one based on lookups of pg_stat_replication.
Backpatch down to 9.6 where the test has been introduced.
Author: Michael Paquier
Reviewed-by: Álvaro Herrera, Noah Misch
Discussion: https://postgr.es/m/20190617055145.GB18917@paquier.xyz
Backpatch-through: 9.6
If the user creates a deferred constraint in a partition, and in a
transaction they cause the constraint's trigger execution to be deferred
until commit time *and* drop the constraint, then when commit time comes
the queued trigger will fail to run because the trigger object will have
been dropped.
This is explained because when a constraint gets dropped in a
partitioned table, the recursion to drop the ones in partitions is done
by the dependency mechanism, not by ALTER TABLE traversing the recursion
tree as in all other cases. In the non-partitioned case, this problem
is avoided by checking that the table is not "in use" by alter-table;
other alter-table subcommands that recurse to partitions do that check
for each partition. But the dependency mechanism doesn't have a way to
do that. Fix the problem by applying the same check to all partitions
during ALTER TABLE's "prep" phase, which correctly raises the necessary
error.
Reported-by: Rajkumar Raghuwanshi <rajkumar.raghuwanshi@enterprisedb.com>
Discussion: https://postgr.es/m/CAKcux6nZiO9-eEpr1ZD84bT1mBoVmeZkfont8iSpcmYrjhGWgA@mail.gmail.com
Include partitioning information much as we do for partitioned tables.
(However, \d+ doesn't show the partition bounds, because those are
not stored for indexes.)
In passing, fix a couple of queries to look less messy in -E output.
Also, add some tests for \d on tables with nondefault tablespaces.
(Somebody previously added a rather silly number of tests for \d
on partitioned indexes, yet completely neglected other cases.)
Justin Pryzby, reviewed by Fabien Coelho
Discussion: https://postgr.es/m/20190422154902.GH14223@telsasoft.com
Add the name of the owning table to the footers for a TOAST table.
Also, show all the same footers as for a regular table (in practice,
this adds the index and perhaps the tablespace and access method).
Justin Pryzby, reviewed by Fabien Coelho
Discussion: https://postgr.es/m/20190422154902.GH14223@telsasoft.com
The logic in ATExecDropColumn that rejects dropping partition key
columns is quite an inadequate defense, because it doesn't execute
in cases where a column needs to be dropped due to cascade from
something that only the column, not the whole partitioned table,
depends on. That leaves us with a badly broken partitioned table;
even an attempt to load its relcache entry will fail.
We really need to have explicit pg_depend entries that show that the
column can't be dropped without dropping the whole table. Hence,
add those entries. In v12 and HEAD, bump catversion to ensure that
partitioned tables will have such entries. We can't do that in
released branches of course, so in v10 and v11 this patch affords
protection only to partitioned tables created after the patch is
installed. Given the lack of field complaints (this bug was found
by fuzz-testing not by end users), that's probably good enough.
In passing, fix ATExecDropColumn and ATPrepAlterColumnType
messages to be more specific about which partition key column
they're complaining about.
Per report from Manuel Rigger. Back-patch to v10 where partitioned
tables were added.
Discussion: https://postgr.es/m/CA+u7OA4JKCPFrdrAbOs7XBiCyD61XJxeNav4LefkSmBLQ-Vobg@mail.gmail.com
Discussion: https://postgr.es/m/31920.1562526703@sss.pgh.pa.us
Change the defaults for the pg_hba.conf generated by initdb to "peer"
for local (if supported, else "md5") and "md5" for host.
(Changing from "md5" to SCRAM is left as a separate exercise.)
"peer" is currently not supported on AIX, HP-UX, and Windows. Users
on those operating systems will now either have to provide a password
to initdb or choose a different authentication method when running
initdb.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/bec17f0a-ddb1-8b95-5e69-368d9d0a3390%40postgresql.org
When we already know the length that we're going to append, then it
makes sense to use appendBinaryStringInfo instead of
appendStringInfoString so that the append can be performed with a simple
memcpy() using a known length rather than having to first perform a
strlen() call to obtain the length.
Discussion: https://postgr.es/m/CAKJS1f8+FRAM1s5+mAa3isajeEoAaicJ=4e0WzrH3tAusbbiMQ@mail.gmail.com
Some code could get confused when certain catalog state involving both
identity and serial sequences was present, perhaps during an attempt
to upgrade the latter to the former. Specifically, dropping the
default of a serial column maintains the ownership of the sequence by
the column, and so it would then be possible to afterwards make the
column an identity column that would now own two sequences. This
causes the code that looks up the identity sequence to error out,
making the new identity column inoperable until the ownership of the
previous sequence is released.
To fix this, make the identity sequence lookup only consider sequences
with the appropriate dependency type for an identity sequence, so it
only ever finds one (unless something else is broken). In the above
example, the old serial sequence would then be ignored. Reorganize
the various owned-sequence-lookup functions a bit to make this
clearer.
Reported-by: Laurenz Albe <laurenz.albe@cybertec.at>
Discussion: https://www.postgresql.org/message-id/flat/470c54fc8590be4de0f41b0d295fd6390d5e8a6c.camel@cybertec.at