the logic it contained to switch to insertion sort for near-sorted input was
in fact a big loss, because it could fairly easily be fooled into applying
insertion sort to large subfiles that weren't all that well ordered. Remove
that, and instead add a simple check for already-perfectly-sorted input, as
per suggestion from Dann Corbit. This adds at worst O(N*lgN) overhead, and
usually far less, while sometimes allowing a subfile sort to finish in O(N)
time. Preliminary testing says this is an improvement over the basic
Bentley & McIlroy code for many nonrandom inputs, and it costs almost
nothing when the input is random.
> type
Wouldn't it be better to use the UINT64CONST macro? I realize this
file is Windows-only, but we do worry about more than one compiler
on that platform.
Kris Jurka
/dev/tty, but it isn't a device file and doesn't work as expected.
This fixes a known bug where psql does not prompt for a password on some
Win32 systems.
Backpatch to 8.1.X.
Robert Kinberg
it later. This fixes a problem where EXEC_BACKEND didn't have progname
set, causing a segfault if log_min_messages was set below debug2 and our
own snprintf.c was being used.
Also alway strdup() progname.
Backpatch to 8.1.X and 8.0.X.
#define HIGHBIT (0x80)
#define IS_HIGHBIT_SET(ch) ((unsigned char)(ch) & HIGHBIT)
and removed CSIGNBIT and mapped it uses to HIGHBIT. I have also added
uses for IS_HIGHBIT_SET where appropriate. This change is
purely for code clarity.
differ by more than the last directory component. Instead of insisting
that they match up to the last component, accept whatever common prefix
they have, and try to replace the non-matching part of bin_path with
the non-matching part of target_path in the actual executable's path.
In one way this is tighter than the old code, because it insists on
a match to the part of bin_path we want to substitute for, rather than
blindly stripping one directory component from the executable's path.
Per gripe from Martin Pitt and subsequent discussion.
I have the problem, when building by MS-VC6.
An error occurs in the 8.1.0 present source codes.
nmake -f win32.mak
..\..\port\getaddrinfo.c(244) : error C2065: 'WSA_NOT_ENOUGH_MEMORY'
..\..\port\getaddrinfo.c(342) : error C2065: 'WSATYPE_NOT_FOUND'
This is used by winsock2.h. However, Construction of a windows base is
winsock.h.
Then, Since MinGW has special environment, this is right. but, it is not
found in VC6.
Furthermore, in getaddrinfo.c, IPV6-API is used by
LoadLibraryA("ws2_32");
Referring to of dll the external memory generates this violation by VC6
specification.
I considered whether the whole should have been converted into winsock2.
However, Now, DLL of MinGW creation operates wonderfully as it is.
That's right, it has pliability by replacement of simple DLL.
Then, I propose the system using winsock(non IPV6) in construction of
VC6.
Hiroshi Saito
incorrect implementation of argument reordering, arbitrary limit of output
size for sprintf and fprintf, willingness to access more bytes than "%.Ns"
specification allows, wrong formatting of LONGLONG_MIN, various field-padding
bugs and omissions. I believe it now accurately implements a subset of
the Single Unix Spec requirements (remaining unimplemented features are
documented, too). Bruce Momjian and Tom Lane.
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
relocated after installation. We can't trust the installation paths
inserted into Makefile.global by configure, so instead we must get the
paths from pg_config. This requires extending pg_config to support all
the separately-configurable path names, but that was on TODO anyway.
of special case for Windows port. Put a PG_TRY around most of createdb()
to ensure that we remove copied subdirectories on failure, even if the
failure happens while creating the pg_database row. (I think this explains
Oliver Siegmar's recent report.) Having done that, there's no need for
the fragile assumption that copydir() mustn't ereport(ERROR), so simplify
its API. Eliminate the old code that used system("cp ...") to copy
subdirectories, in favor of using copydir() on all platforms. This not
only should allow much better error reporting, but allows us to fsync
the created files before trusting that the copy has succeeded.
The first rule of portability for us is 'thou shalt have no other gods
before c.h', and a whole lot of these files were either not including
c.h at all, or including random system headers beforehand, either of
which sins can mess up largefile support nicely. Once you have
included c.h, there is no need to re-include what it includes, either.
currently does. This is now the default Win32 wal sync method because
we perfer o_datasync to fsync.
Also, change Win32 fsync to a new wal sync method called
fsync_writethrough because that is the behavior of _commit, which is
what is used for fsync on Win32.
Backpatch to 8.0.X.
Document use of macros for pg_printf functions.
Bump major versions of all interfaces to handle movement of get_progname
from libpq to libpgport in 8.0, and probably other libpgport changes in 8.1.
+ # Determine if printf supports %1$ argument selection, e.g. %5$ selects
+ # the fifth argument after the printf print string.
+ # This is not in the C99 standard, but in the Single Unix Specification (SUS).
+ # It is used in our langauge translation strings.
Nicolai Tufar with configure changes by Bruce.
discussion on pgsql-hackers-win32 list. Documentation still needs to
be tweaked --- I'm not sure how to refer to the APPDATA folder in
user documentation.
consistent. On Unix we now always consult getpwuid(); $HOME isn't used
at all. On Windows the code currently consults $USERPROFILE, or $HOME
if that's not defined, but I expect this will change as soon as the win32
hackers come to a consensus. Nothing done yet about changing the file
names used underneath $USERPROFILE.
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
executable file isn't itself a symlink. We still need to run the
algorithm so that any directory symlinks in the path to the
executable are replaced by a true path. Noticed this on seeing
pg_config give me a completely wrong answer for --pkglibdir when
I called it through a symlink to the installation bindir.
actual executable location. This allows people to continue to use
setups where, eg, postmaster is symlinked from a convenient place.
Per gripe from Josh Berkus.
everywhere not just some places, get rid of . and .. when joining path
sections together. This should eliminate most of the ugly paths like
/foo/bar/./baz that we've been generating.
"make pgxs install by default". It is up to the committers to chose.
(1) there is only one "install" target. no more "install-all-headers".
it simplifies/changes several makefiles.
(2) the documentation reflects the change.
(3) a minor fix on pgxs to use a nicer patch without a double slash.
Fabien Coelho
pickup license clarification (3-clause BSD is now used). Add license
terms to memcmp.c (also from NetBSD), which previously had none.
Finally, pickup an upstream fix to crypt.c (const-ify some arrays).
Fix TablespaceCreateDbspace() to be able to create a dummy directory
in place of a dropped tablespace's symlink. This eliminates the open
problem of a PANIC during WAL replay when a replayed action attempts
to touch a file in a since-deleted tablespace. It also makes for a
significant improvement in the usability of PITR replay.
> > The patch adds missing the "libpgport.a" file to the installation under
> > "install-all-headers". It is needed by some contribs. I install the
> > library in "pkglibdir", but I was wondering whether it should be "libdir"?
Please find attached a small patch against current CVS head that fixes
pgport library installation so that it goes to libdir instead of
pkglibdir. It works for me.
Fabien Coelho
>
> The patch adds missing the "libpgport.a" file to the installation under
> "install-all-headers". It is needed by some contribs. I install the
> library in "pkglibdir", but I was wondering whether it should be "libdir"?
> I was wondering also whether it would make sense to have a "libpgport.so"?
>
> It fixes various macros which are used by contrib makefiles, especially
> libpq_*dir and LDFLAGS when used under PGXS. It seems to me that they are
> needed to
>
> It adds the ability to test and use PGXS with contribs, with "make
> USE_PGXS=1". Without the macro, this is exactly as before, there should be
> no difference, esp. wrt the vpath feature that seemed broken by previous
> submission. So it should not harm anybody, and it is useful at least to me.
>
> It fixes some inconsistencies in various contrib makefiles
> (useless override, ":=" instead of "=").
Fabien COELHO
and doesn't process forward slashes in the same way as external
commands. Quoting the first argument to COPY does not convert forward
to backward slashes, but COPY does properly process quoted forward
slashes in the second argument.
Win32 COPY works with quoted forward slashes in the first argument only if the
current directory is the same as the directory of the first argument.
of '.' or '..'. Extend canonicalize_path() to trim off trailing occurrences
of these things, and use it to fix up paths where needed (which I think is
only after places where we trim the last path component, but maybe some
others will turn up). Fixes Josh's complaint that './initdb' does not
work.
CurrentMemoryContext is DLLIMPORT on Win32. Work around that by
creating stubs in the backend for palloc/pstrdup.
Also fix pg_dumpall to do proper quoting on Win32.
Also a quick but half-baked attempt to make trim_trailing_separator
do the right thing with path consisting only of '/' --- still needs
work for Windows I think.
call fails when it does. (As it is now, there is no way to figure out
the point of error). Shouldn't be a problem since it's most defintily
not a performance-critical path (only called on pgstat startup ATM).
This should help us debug the pipe error message that's on the win32
status page (which I myself have never been able to reproduce, and thus
haven't figured out a better way to debug yet)
Magnus Hagander
extensive change then what was suggested. I found the file path.c that
contained a lot of "Unix/Windows" agnostic functions so I added a function
there instead and removed the PATHSEP declaration in exec.c altogether. All
to keep things from scattering all over the code.
I also took the liberty of changing the name of the functions
"first_path_sep" and "last_path_sep". Where I come from (and I'm apparently
not alone given the former macro name PATHSEP), they should be called
"first_dir_sep" and "last_dir_sep". The new function I introduced, that
actually finds path separators, is now the "first_path_sep". The patch
contains changes on all affected places of course.
I also changed the documentation on dynamic_library_path to reflect the
chagnes.
Thomas Hallgren
environment variable processing to libpq.
The patch also adds code to our client apps so we set the environment
variable directly based on our binary location, unless it is already
set. This will allow our applications to emit proper locale messages
that are generated in libpq.
several different module Makefiles with it. Also, do any adjustment
of installation paths during configure, rather than every time Makefile.global
is read.
and should do now that we control our own destiny for timezone handling,
but this commit gets the bulk of the picayune diffs in place.
Magnus Hagander and Tom Lane.
timezone code and other places.
Remove elog() calls from find_my_exec; do fprintf(stderr) instead. We
can then remove the exec.c handling in the makefile because it doesn't
have to be built to suppress elog calls.
Bruce Momjian
Tom Lane
Alvaro Herrera
Peter Eisentraut
Neil Conway
PostgreSQL Daemon