Due to b67aaf21e8 / CREATE EXTENSION ... CASCADE the test output
contains the extension name in yet another place. Since that's variable
depending on the python version...
Add yet another name mangling stanza to regress-python3-mangle.mk.
Author: Petr Jelinek
On reflection, the submitted patch didn't really work to prevent the
request size from exceeding MaxAllocSize, because of the fact that we'd
happily round nbuckets up to the next power of 2 after we'd limited it to
max_pointers. The simplest way to enforce the limit correctly is to
round max_pointers down to a power of 2 when it isn't one already.
(Note that the constraint to INT_MAX / 2, if it were doing anything useful
at all, is properly applied after that.)
Limit the size of the hashtable pointer array to not more than
MaxAllocSize, per reports from Kouhei Kaigai and others of "invalid memory
alloc request size" failures. There was discussion of allowing the array
to get larger than that by using the "huge" palloc API, but so far no proof
that that is actually a good idea, and at this point in the 9.5 cycle major
changes from old behavior don't seem like the way to go.
Fix a rather serious secondary bug in the new code, which was that it
didn't ensure nbuckets remained a power of 2 when recomputing it for the
multiple-batch case.
Clean up sloppy division of labor between ExecHashIncreaseNumBuckets and
its sole call site.
Null path elements and, where the object is an array, invalid integer
elements now cause an error.
Incorrect behaviour noted by Thom Brown, patch from Dmitry Dolgov.
Backpatch to 9.5 where jsonb_set was introduced
Specifically, make its effect independent from the row_security GUC, and
make it affect permission checks pertinent to views the BYPASSRLS role
owns. The row_security GUC thereby ceases to change successful-query
behavior; it can only make a query fail with an error. Back-patch to
9.5, where BYPASSRLS was introduced.
Without CASCADE, if an extension has an unfullfilled dependency on
another extension, CREATE EXTENSION ERRORs out with "required extension
... is not installed". That is annoying, especially when that dependency
is an implementation detail of the extension, rather than something the
extension's user can make sense of.
In addition to CASCADE this also includes a small set of regression
tests around CREATE EXTENSION.
Author: Petr Jelinek, editorialized by Michael Paquier, Andres Freund
Reviewed-By: Michael Paquier, Andres Freund, Jeff Janes
Discussion: 557E0520.3040800@2ndquadrant.com
The existing hint talked about "may only contain letters", but the
actual requirement is more strict: only lower case letters are allowed.
Reported-By: Rushabh Lathia
Author: Rushabh Lathia
Discussion: AGPqQf2x50qcwbYOBKzb4x75sO_V3g81ZsA8+Ji9iN5t_khFhQ@mail.gmail.com
Backpatch: 9.4-, where replication slots were added
Four related issues:
1) attnos/varnos/resnos for EXCLUDED were out of sync when a column
after one dropped in the underlying relation was referenced.
2) References to whole-row variables (i.e. EXCLUDED.*) lead to errors.
3) It was possible to reference system columns in the EXCLUDED pseudo
relations, even though they would not have valid contents.
4) References to EXCLUDED were rewritten by the RLS machinery, as
EXCLUDED was treated as if it were the underlying relation.
To fix the first two issues, generate the excluded targetlist with
dropped columns in mind and add an entry for whole row
variables. Instead of unconditionally adding a wholerow entry we could
pull up the expression if needed, but doing it unconditionally seems
simpler. The wholerow entry is only really needed for ruleutils/EXPLAIN
support anyway.
The remaining two issues are addressed by changing the EXCLUDED RTE to
have relkind = composite. That fits with EXCLUDED not actually being a
real relation, and allows to treat it differently in the relevant
places. scanRTEForColumn now skips looking up system columns when the
RTE has a composite relkind; fireRIRrules() already had a corresponding
check, thereby preventing RLS expansion on EXCLUDED.
Also add tests for these issues, and improve a few comments around
excluded handling in setrefs.c.
Reported-By: Peter Geoghegan, Geoff Winkless
Author: Andres Freund, Amit Langote, Peter Geoghegan
Discussion: CAEzk6fdzJ3xYQZGbcuYM2rBd2BuDkUksmK=mY9UYYDugg_GgZg@mail.gmail.com,
CAM3SWZS+CauzbiCEcg-GdE6K6ycHE_Bz6Ksszy8AoixcMHOmsA@mail.gmail.com
Backpatch: 9.5, where ON CONFLICT was introduced
DST law changes in Cayman Islands, Fiji, Moldova, Morocco, Norfolk Island,
North Korea, Turkey, Uruguay. New zone America/Fort_Nelson for Canadian
Northern Rockies.
Some of the functions in regex compilation and execution recurse, and
therefore could in principle be driven to stack overflow. The Tcl crew
has seen this happen in practice in duptraverse(), though their fix was
to put in a hard-wired limit on the number of recursive levels, which is
not too appetizing --- fortunately, we have enough infrastructure to check
the actually available stack. Greg Stark has also seen it in other places
while fuzz testing on a machine with limited stack space. Let's put guards
in to prevent crashes in all these places.
Since the regex code would leak memory if we simply threw elog(ERROR),
we have to introduce an API that checks for stack depth without throwing
such an error. Fortunately that's not difficult.
In cfindloop(), if the initial call to shortest() reports that a
zero-length match is possible at the current search start point, but then
it is unable to construct any actual match to that, it'll just loop around
with the same start point, and thus make no progress. We need to force the
start point to be advanced. This is safe because the loop over "begin"
points has already tried and failed to match starting at "close", so there
is surely no need to try that again.
This bug was introduced in commit e2bd904955,
wherein we allowed continued searching after we'd run out of match
possibilities, but evidently failed to think hard enough about exactly
where we needed to search next.
Because of the way this code works, such a match failure is only possible
in the presence of backrefs --- otherwise, shortest()'s judgment that a
match is possible should always be correct. That probably explains how
come the bug has escaped detection for several years.
The actual fix is a one-liner, but I took the trouble to add/improve some
comments related to the loop logic.
After fixing that, the submitted test case "()*\1" didn't loop anymore.
But it reported failure, though it seems like it ought to match a
zero-length string; both Tcl and Perl think it does. That seems to be from
overenthusiastic optimization on my part when I rewrote the iteration match
logic in commit 173e29aa5deefd9e71c183583ba37805c8102a72: we can't just
"declare victory" for a zero-length match without bothering to set match
data for capturing parens inside the iterator node.
Per fuzz testing by Greg Stark. The first part of this is a bug in all
supported branches, and the second part is a bug since 9.2 where the
iteration rewrite happened.
Commit 9662143f0c added infrastructure to
allow regular-expression operations to be terminated early in the event
of SIGINT etc. However, fuzz testing by Greg Stark disclosed that there
are still cases where regex compilation could run for a long time without
noticing a cancel request. Specifically, the fixempties() phase never
adds new states, only new arcs, so it doesn't hit the cancel check I'd put
in newstate(). Add one to newarc() as well to cover that.
Some experimentation of my own found that regex execution could also run
for a long time despite a pending cancel. We'd put a high-level cancel
check into cdissect(), but there was none inside the core text-matching
routines longest() and shortest(). Ordinarily those inner loops are very
very fast ... but in the presence of lookahead constraints, not so much.
As a compromise, stick a cancel check into the stateset cache-miss
function, which is enough to guarantee a cancel check at least once per
lookahead constraint test.
Making this work required more attention to error handling throughout the
regex executor. Henry Spencer had apparently originally intended longest()
and shortest() to be incapable of incurring errors while running, so
neither they nor their subroutines had well-defined error reporting
behaviors. However, that was already broken by the lookahead constraint
feature, since lacon() can surely suffer an out-of-memory failure ---
which, in the code as it stood, might never be reported to the user at all,
but just silently be treated as a non-match of the lookahead constraint.
Normalize all that by inserting explicit error tests as needed. I took the
opportunity to add some more comments to the code, too.
Back-patch to all supported branches, like the previous patch.
It's not terribly hard to devise regular expressions that take large
amounts of time and/or memory to process. Recent testing by Greg Stark has
also shown that machines with small stack limits can be driven to stack
overflow by suitably crafted regexps. While we intend to fix these things
as much as possible, it's probably impossible to eliminate slow-execution
cases altogether. In any case we don't want to treat such things as
security issues. The history of that code should already discourage
prudent DBAs from allowing execution of regexp patterns coming from
possibly-hostile sources, but it seems like a good idea to warn about the
hazard explicitly.
Currently, similar_escape() allows access to enough of the underlying
regexp behavior that the warning has to apply to SIMILAR TO as well.
We might be able to make it safer if we tightened things up to allow only
SQL-mandated capabilities in SIMILAR TO; but that would be a subtly
non-backwards-compatible change, so it requires discussion and probably
could not be back-patched.
Per discussion among pgsql-security list.
The "floatrange" example is a bit too simple because float8mi can be
used without any additional type conversion. Add an example that does
have to account for that, and do some minor other wordsmithing.
The output of a typical pg_rewind run contained a mix of capitalized and
not-capitalized and punctuated and not-punctuated phrases for no
apparent reason. Make that consistent. Also fix some problems in other
messages.
This case seems to have been overlooked when unvalidated check constraints
were introduced, in 9.2. The code would attempt to dump such constraints
over again for each child table, even though adding them to the parent
table is sufficient.
In 9.2 and 9.3, also fix contrib/pg_upgrade/Makefile so that the "make
clean" target fully cleans up after a failed test. This evidently got
dealt with at some point in 9.4, but it wasn't back-patched. I ran into
it while testing this fix ...
Per bug #13656 from Ingmar Brouns.
Module initialization was still not completely correct after commit
6b61955135, per crash report from Takashi Ohnishi. To fix, instead of
trying to monkey around with the value of the GUC setting directly, add
a separate boolean flag that enables the feature on a standby, but only
for the startup (recovery) process, when it sees that its master server
has the feature enabled.
Discussion: http://www.postgresql.org/message-id/ca44c6c7f9314868bdc521aea4f77cbf@MP-MSGSS-MBX004.msg.nttdata.co.jp
Also change the deactivation routine to delete all segment files rather
than leaving the last one around. (This doesn't need separate
WAL-logging, because on recovery we execute the same deactivation
routine anyway.)
In passing, clean up the code structure somewhat, particularly so that
xlog.c doesn't know so much about when to activate/deactivate the
feature.
Thanks to Fujii Masao for testing and Petr Jelínek for off-list discussion.
Back-patch to 9.5, where commit_ts was introduced.
Previously "GRANT * ON * TO " was tab-completed to add an extra "TO",
rather than with a list of roles. This is the bug that commit 2f88807
introduced unexpectedly. This commit fixes that incorrect tab-completion.
Thomas Munro, reviewed by Jeff Janes.
Previously it was documented that the details on HeapTupleHeaderData
struct could be found in htup.h. This is not correct because it's now
defined in htup_details.h.
Back-patch to 9.3 where the definition of HeapTupleHeaderData struct
was moved from htup.h to htup_details.h.
Michael Paquier
If some existing listener is far behind, incoming new listener sessions
would start from that session's read pointer and then need to advance over
many already-committed notification messages, which they have no interest
in. This was expensive in itself and also thrashed the pg_notify SLRU
buffers a lot more than necessary. We can improve matters considerably
in typical scenarios, without much added cost, by starting from the
furthest-ahead read pointer, not the furthest-behind one. We do have to
consider only sessions in our own database when doing this, which requires
an extra field in the data structure, but that's a pretty small cost.
Back-patch to 9.0 where the current LISTEN/NOTIFY logic was introduced.
Matt Newell, slightly adjusted by me
A Gather executor node runs any number of copies of a plan in an equal
number of workers and merges all of the results into a single tuple
stream. It can also run the plan itself, if the workers are
unavailable or haven't started up yet. It is intended to work with
the Partial Seq Scan node which will be added in future commits.
It could also be used to implement parallel query of a different sort
by itself, without help from Partial Seq Scan, if the single_copy mode
is used. In that mode, a worker executes the plan, and the parallel
leader does not, merely collecting the worker's results. So, a Gather
node could be inserted into a plan to split the execution of that plan
across two processes. Nested Gather nodes aren't currently supported,
but we might want to add support for that in the future.
There's nothing in the planner to actually generate Gather nodes yet,
so it's not quite time to break out the champagne. But we're getting
close.
Amit Kapila. Some designs suggestions were provided by me, and I also
reviewed the patch. Single-copy mode, documentation, and other minor
changes also by me.
If a transaction or subtransaction creates a ParallelContext but ends
without calling InitializeParallelDSM, the previous code would
seg fault. Fix that.
When considering which policies should be included, rather than look at
individual bits of the query (eg: if a RETURNING clause exists, or if a
WHERE clause exists which is referencing the table, or if it's a
FOR SHARE/UPDATE query), consider any case where we've determined
the user needs SELECT rights on the relation while doing an UPDATE or
DELETE to be a case where we apply SELECT policies, and any case where
we've deteremind that the user needs UPDATE rights on the relation while
doing a SELECT to be a case where we apply UPDATE policies.
This simplifies the logic and addresses concerns that a user could use
UPDATE or DELETE with a WHERE clauses to determine if rows exist, or
they could use SELECT .. FOR UPDATE to lock rows which they are not
actually allowed to modify through UPDATE policies.
Use list_append_unique() to avoid adding the same quals multiple times,
as, on balance, the cost of checking when adding the quals will almost
always be cheaper than keeping them and doing busywork for each tuple
during execution.
Back-patch to 9.5 where RLS was added.
We seem to have lost a line somewhere along the way in the comment block
that discusses async.c's locks, because it suddenly refers to "both locks"
without previously having mentioned more than one. Add a sentence to make
that read more sanely. Also, refer to the "pos of the slowest backend"
not the "tail of the slowest backend", since we have no per-backend value
called "tail".
The tolerance (larger than actual tps number) increases as the number
of threads decreases. The bug has been there since the thread support
was introduced in 9.0. Because back patching introduces incompatible
behavior changes regarding the tps number, the fix is committed to
master and 9.5 stable branches only.
Problem spotted by me and fix proposed by Fabien COELHO. Note that his
original patch included more than fixes (a code re-factoring) which is
not related to the problem and I omitted the part.
There are three main changes here:
1. No longer cause a start failure in a standby if the feature is
disabled in postgresql.conf but enabled in the master. This reverts one
part of commit 4f3924d9cd43; what we keep is the ability of the standby
to activate/deactivate the module (which includes creating and removing
segments as appropriate) during replay of such actions in the master.
2. Replay WAL records affecting commitTS even if the feature is
disabled. This means the standby will always have the same state as the
master after replay.
3. Have COMMIT PREPARE record the transaction commit time as well. We
were previously only applying it in the normal transaction commit path.
Author: Petr Jelínek
Discussion: http://www.postgresql.org/message-id/CAHGQGwHereDzzzmfxEBYcVQu3oZv6vZcgu1TPeERWbDc+gQ06g@mail.gmail.com
Discussion: http://www.postgresql.org/message-id/CAHGQGwFuzfO4JscM9LCAmCDCxp_MfLvN4QdB+xWsS-FijbjTYQ@mail.gmail.com
Additionally, I cleaned up nearby code related to replication origins,
which I found a bit hard to follow, and fixed a couple of typos.
Backpatch to 9.5, where this code was introduced.
Per bug reports from Fujii Masao and subsequent discussion.
We were passing error message texts to croak() verbatim, which turns out
not to work if the text contains non-ASCII characters; Perl mangles their
encoding, as reported in bug #13638 from Michal Leinweber. To fix, convert
the text into a UTF8-encoded SV first.
It's hard to test this without risking failures in different database
encodings; but we can follow the lead of plpython, which is already
assuming that no-break space (U+00A0) has an equivalent in all encodings
we care about running the regression tests in (cf commit 2dfa15de5).
Back-patch to 9.1. The code is quite different in 9.0, and anyway it seems
too risky to put something like this into 9.0's final minor release.
Alex Hunsaker, with suggestions from Tim Bunce and Tom Lane
This code provides infrastructure for a parallel leader to start up
parallel workers to execute subtrees of the plan tree being executed
in the master. User-supplied parameters from ParamListInfo are passed
down, but PARAM_EXEC parameters are not. Various other constructs,
such as initplans, subplans, and CTEs, are also not currently shared.
Nevertheless, there's enough here to support a basic implementation of
parallel query, and we can lift some of the current restrictions as
needed.
Amit Kapila and Robert Haas
Thom Brown reported that SSL connections didn't seem to work on Windows in
9.5. Asif Naeem figured out that the cause was my_sock_read() looking at
"errno" when it needs to look at "SOCK_ERRNO". This mistake was introduced
in commit 680513ab79, which cloned the
backend's custom SSL BIO code into libpq, and didn't translate the errno
handling properly. Moreover, it introduced unnecessary errno save/restore
logic, which was particularly confusing because it was incomplete; and it
failed to check for all three of EINTR, EAGAIN, and EWOULDBLOCK in
my_sock_write. (That might not be necessary; but since we're copying
well-tested backend code that does do that, it seems prudent to copy it
faithfully.)
To make sure that pg_dump/pg_restore function properly with RLS
policies, arrange to have a few of them left around at the end of the
regression tests.
Back-patch to 9.5 where RLS was added.
Andres Freund
Tom Lane
Andrew Dunstan
Peter Eisentraut
Noah Misch
Robert Haas
Alvaro Herrera
Fujii Masao
Stephen Frost
Tatsuo Ishii