This commit makes pg_stat_statements support new GUC
pg_stat_statements.track_planning. If this option is enabled,
pg_stat_statements tracks the planning statistics of the statements,
e.g., the number of times the statement was planned, the total time
spent planning the statement, etc. This feature is useful to check
the statements that it takes a long time to plan. Previously since
pg_stat_statements tracked only the execution statistics, we could
not use that for the purpose.
The planning and execution statistics are stored at the end of
each phase separately. So there are not always one-to-one relationship
between them. For example, if the statement is successfully planned
but fails in the execution phase, only its planning statistics are stored.
This may cause the users to be able to see different pg_stat_statements
results from the previous version. To avoid this,
pg_stat_statements.track_planning needs to be disabled.
This commit bumps the version of pg_stat_statements to 1.8
since it changes the definition of pg_stat_statements function.
Author: Julien Rouhaud, Pascal Legrand, Thomas Munro, Fujii Masao
Reviewed-by: Sergei Kornilov, Tomas Vondra, Yoshikazu Imai, Haribabu Kommi, Tom Lane
Discussion: https://postgr.es/m/CAHGQGwFx_=DO-Gu-MfPW3VQ4qC7TfVdH2zHmvZfrGv6fQ3D-Tw@mail.gmail.com
Discussion: https://postgr.es/m/CAEepm=0e59Y_6Q_YXYCTHZkqOc6H2pJ54C_Xe=VFu50Aqqp_sA@mail.gmail.com
Discussion: https://postgr.es/m/DB6PR0301MB21352F6210E3B11934B0DCC790B00@DB6PR0301MB2135.eurprd03.prod.outlook.com
There's a number of SLRU caches used to access important data like clog,
commit timestamps, multixact, asynchronous notifications, etc. Until now
we had no easy way to monitor these shared caches, compute hit ratios,
number of reads/writes etc.
This commit extends the statistics collector to track this information
for a predefined list of SLRUs, and also introduces a new system view
pg_stat_slru displaying the data.
The list of built-in SLRUs is fixed, but additional SLRUs may be defined
in extensions. Unfortunately, there's no suitable registry of SLRUs, so
this patch simply defines a fixed list of SLRUs with entries for the
built-in ones and one entry for all additional SLRUs. Extensions adding
their own SLRU are fairly rare, so this seems acceptable.
This patch only allows monitoring of SLRUs, not tuning. The SLRU sizes
are still fixed (hard-coded in the code) and it's not entirely clear
which of the SLRUs might need a GUC to tune size. In a way, allowing us
to determine that is one of the goals of this patch.
Bump catversion as the patch introduces new functions and system view.
Author: Tomas Vondra
Reviewed-by: Alvaro Herrera
Discussion: https://www.postgresql.org/message-id/flat/20200119143707.gyinppnigokesjok@development
Quite a few matching operators such as JSONB's @> used "contsel" and
"contjoinsel" as their selectivity estimators. That was a bad idea,
because (a) contsel is only a stub, yielding a fixed default estimate,
and (b) that default is 0.001, meaning we estimate these operators as
five times more selective than equality, which is surely pretty silly.
There's a good model for improving this in ltree's ltreeparentsel():
for any "var OP constant" query, we can try applying the operator
to all of the column's MCV and histogram values, taking the latter
as being a random sample of the non-MCV values. That code is
actually 100% generic, except for the question of exactly what
default selectivity ought to be plugged in when we don't have stats.
Hence, migrate the guts of ltreeparentsel() into the core code, provide
wrappers "matchingsel" and "matchingjoinsel" with a more-appropriate
default estimate, and use those for the non-geometric operators that
formerly used contsel (mostly JSONB containment operators and tsquery
matching).
Also apply this code to some match-like operators in hstore, ltree, and
pg_trgm, including the former users of ltreeparentsel as well as ones
that improperly used contsel. Since commit 911e70207 just created new
versions of those extensions that we haven't released yet, we can sneak
this change into those new versions instead of having to create an
additional generation of update scripts.
Patch by me, reviewed by Alexey Bashtanov
Discussion: https://postgr.es/m/12237.1582833074@sss.pgh.pa.us
The previously listed total of 179 does not appear to be correct for
SQL:2016 anymore. (Previous SQL versions had slightly different
feature sets, so it's plausible that it was once correct.) The
currently correct count is the number of rows in the respective tables
in appendix F in SQL parts 2 and 11, minus 2 features that are listed
twice. Thus the correct count is currently 177. This also matches
the number of Core entries the built documentation currently shows, so
it's internally consistent.
Old versions of opclass parameters patch supported ability to specify DEFAULT
as the opclass name in CREATE INDEX command. This ability was removed in the
final version, but 911e702077 still mentions that in the documentation.
pg_rewind needs to copy from the source cluster to the target cluster a
set of relation blocks changed from the previous checkpoint where WAL
forked up to the end of WAL on the target. Building this list of
relation blocks requires a range of WAL segments that may not be present
anymore on the target's pg_wal, causing pg_rewind to fail. It is
possible to work around this issue by copying manually the WAL segments
needed but this may lead to some extra and actually useless work.
This commit introduces a new option allowing pg_rewind to use a
restore_command while doing the rewind by grabbing the parameter value
of restore_command from the target cluster configuration. This allows
the rewind operation to be more reliable, so as only the WAL segments
needed by the rewind are restored from the archives.
In order to be able to do that, a new routine is added to src/common/ to
allow frontend tools to restore files from archives using an
already-built restore command. This version is more simple than the
backend equivalent as there is no need to handle the non-recovery case.
Author: Alexey Kondratov
Reviewed-by: Andrey Borodin, Andres Freund, Alvaro Herrera, Alexander
Korotkov, Michael Paquier
Discussion: https://postgr.es/m/a3acff50-5a0d-9a2c-b3b2-ee36168955c1@postgrespro.ru
The existing implementation of the ltree ~ lquery match operator is
sufficiently complex and undocumented that it's hard to tell exactly
what it does. But one thing it clearly gets wrong is the combination
of NOT symbols (!) and '*' symbols. A pattern such as '*.!foo.*'
should, by any ordinary understanding of regular expression behavior,
match any ltree that has at least one label that's not "foo". As best
we can tell by experimentation, what it's actually matching is any
ltree in which *no* label is "foo". That's surprising, and not at all
what the documentation says.
Now, that's arguably a useful behavior, so if we rewrite to fix the
bug we should provide some other way to get it. To do so, add the
ability to attach lquery quantifiers to non-'*' items as well as '*'s.
Then the pattern '!foo{,}' expresses "any ltree in which no label is
foo". For backwards compatibility, the default quantifier for non-'*'
items has to be "{1}", although the default for '*' items is '{,}'.
I wouldn't have done it like that in a green field, but it's not
totally horrible.
Armed with that, rewrite checkCond() from scratch. Treating '*' and
non-'*' items alike makes it simpler, not more complicated, so that
the function actually gets a lot shorter than it was.
Filip Rembiałkowski, Tom Lane, Nikita Glukhov, per a very
ancient bug report from M. Palm
Discussion: https://postgr.es/m/CAP_rww=waX2Oo6q+MbMSiZ9ktdj6eaJj0cQzNu=Ry2cCDij5fw@mail.gmail.com
The original implementation disallowed using OVERRIDING USER VALUE on
identity columns defined as GENERATED ALWAYS, which is not per
standard. So allow that now.
Expand documentation and tests around this.
Author: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Vik Fearing <vik@postgresfriends.org>
Discussion: https://www.postgresql.org/message-id/flat/CAEZATCVrh2ufCwmzzM%3Dk_OfuLhTTPBJCdFkimst2kry4oHepuQ%40mail.gmail.com
PostgreSQL provides set of template index access methods, where opclasses have
much freedom in the semantics of indexing. These index AMs are GiST, GIN,
SP-GiST and BRIN. There opclasses define representation of keys, operations on
them and supported search strategies. So, it's natural that opclasses may be
faced some tradeoffs, which require user-side decision. This commit implements
opclass parameters allowing users to set some values, which tell opclass how to
index the particular dataset.
This commit doesn't introduce new storage in system catalog. Instead it uses
pg_attribute.attoptions, which is used for table column storage options but
unused for index attributes.
In order to evade changing signature of each opclass support function, we
implement unified way to pass options to opclass support functions. Options
are set to fn_expr as the constant bytea expression. It's possible due to the
fact that opclass support functions are executed outside of expressions, so
fn_expr is unused for them.
This commit comes with some examples of opclass options usage. We parametrize
signature length in GiST. That applies to multiple opclasses: tsvector_ops,
gist__intbig_ops, gist_ltree_ops, gist__ltree_ops, gist_trgm_ops and
gist_hstore_ops. Also we parametrize maximum number of integer ranges for
gist__int_ops. However, the main future usage of this feature is expected
to be json, where users would be able to specify which way to index particular
json parts.
Catversion is bumped.
Discussion: https://postgr.es/m/d22c3a18-31c7-1879-fc11-4c1ce2f5e5af%40postgrespro.ru
Author: Nikita Glukhov, revised by me
Reviwed-by: Nikolay Shaplov, Robert Haas, Tom Lane, Tomas Vondra, Alvaro Herrera
When certain parameters are changed on a physical replication primary,
this is communicated to standbys using the XLOG_PARAMETER_CHANGE WAL
record. The standby then checks whether its own settings are at least
as big as the ones on the primary. If not, the standby shuts down
with a fatal error.
The correspondence of settings between primary and standby is required
because those settings influence certain shared memory sizings that
are required for processing WAL records that the primary might send.
For example, if the primary sends a prepared transaction, the standby
must have had max_prepared_transaction set appropriately or it won't
be able to process those WAL records.
However, fatally shutting down the standby immediately upon receipt of
the parameter change record might be a bit of an overreaction. The
resources related to those settings are not required immediately at
that point, and might never be required if the activity on the primary
does not exhaust all those resources. If we just let the standby roll
on with recovery, it will eventually produce an appropriate error when
those resources are used.
So this patch relaxes this a bit. Upon receipt of
XLOG_PARAMETER_CHANGE, we still check the settings but only issue a
warning and set a global flag if there is a problem. Then when we
actually hit the resource issue and the flag was set, we issue another
warning message with relevant information. At that point we pause
recovery, so a hot standby remains usable. We also repeat the last
warning message once a minute so it is harder to miss or ignore.
Reviewed-by: Sergei Kornilov <sk@zsrv.org>
Reviewed-by: Masahiko Sawada <masahiko.sawada@2ndquadrant.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/4ad69a4c-cc9b-0dfe-0352-8b1b0cd36c7b@2ndquadrant.com
The documentation says that the max length is 255 bytes, but
code inspection says it's actually 255 characters; and relevant
lengths are stored as uint16 so that that works.
These uint16 fields could be overflowed by excessively long input,
producing strange results. Complain for invalid input.
Likewise check for out-of-range values of the repeat counts in lquery.
(We don't try too hard on that one, notably not bothering to detect
if atoi's result has overflowed.)
Also detect length overflow in ltree_concat.
In passing, be more consistent about whether "syntax error" messages
include the type name. Also, clarify the documentation about what
the size limit is.
This has been broken for a long time, so back-patch to all supported
branches.
Nikita Glukhov, reviewed by Benjie Gillam and Tomas Vondra
Discussion: https://postgr.es/m/CAP_rww=waX2Oo6q+MbMSiZ9ktdj6eaJj0cQzNu=Ry2cCDij5fw@mail.gmail.com
Traditionally autovacuum has only ever invoked a worker based on the
estimated number of dead tuples in a table and for anti-wraparound
purposes. For the latter, with certain classes of tables such as
insert-only tables, anti-wraparound vacuums could be the first vacuum that
the table ever receives. This could often lead to autovacuum workers being
busy for extended periods of time due to having to potentially freeze
every page in the table. This could be particularly bad for very large
tables. New clusters, or recently pg_restored clusters could suffer even
more as many large tables may have the same relfrozenxid, which could
result in large numbers of tables requiring an anti-wraparound vacuum all
at once.
Here we aim to reduce the work required by anti-wraparound and aggressive
vacuums in general, by triggering autovacuum when the table has received
enough INSERTs. This is controlled by adding two new GUCs and reloptions;
autovacuum_vacuum_insert_threshold and
autovacuum_vacuum_insert_scale_factor. These work exactly the same as the
existing scale factor and threshold controls, only base themselves off the
number of inserts since the last vacuum, rather than the number of dead
tuples. New controls were added rather than reusing the existing
controls, to allow these new vacuums to be tuned independently and perhaps
even completely disabled altogether, which can be done by setting
autovacuum_vacuum_insert_threshold to -1.
We make no attempt to skip index cleanup operations on these vacuums as
they may trigger for an insert-mostly table which continually doesn't have
enough dead tuples to trigger an autovacuum for the purpose of removing
those dead tuples. If we were to skip cleaning the indexes in this case,
then it is possible for the index(es) to become bloated over time.
There are additional benefits to triggering autovacuums based on inserts,
as tables which never contain enough dead tuples to trigger an autovacuum
are now more likely to receive a vacuum, which can mark more of the table
as "allvisible" and encourage the query planner to make use of Index Only
Scans.
Currently, we still obey vacuum_freeze_min_age when triggering these new
autovacuums based on INSERTs. For large insert-only tables, it may be
beneficial to lower the table's autovacuum_freeze_min_age so that tuples
are eligible to be frozen sooner. Here we've opted not to zero that for
these types of vacuums, since the table may just be insert-mostly and we
may otherwise freeze tuples that are still destined to be updated or
removed in the near future.
There was some debate to what exactly the new scale factor and threshold
should default to. For now, these are set to 0.2 and 1000, respectively.
There may be some motivation to adjust these before the release.
Author: Laurenz Albe, Darafei Praliaskouski
Reviewed-by: Alvaro Herrera, Masahiko Sawada, Chris Travers, Andres Freund, Justin Pryzby
Discussion: https://postgr.es/m/CAC8Q8t%2Bj36G_bLF%3D%2B0iMo6jGNWnLnWb1tujXuJr-%2Bx8ZCCTqoQ%40mail.gmail.com
The parameters primary_conninfo, primary_slot_name and
wal_receiver_create_temp_slot can now be changed with a simple "reload"
signal, no longer requiring a server restart. This is achieved by
signalling the walreceiver process to terminate and having it start
again with the new values.
Thanks to Andres Freund, Kyotaro Horiguchi, Fujii Masao for discussion.
Author: Sergei Kornilov <sk@zsrv.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/19513901543181143@sas1-19a94364928d.qloud-c.yandex.net
Commit 3297308278 gave walreceiver the ability to create and use a
temporary replication slot, and made it controllable by a GUC (enabled
by default) that can be changed with SIGHUP. That's useful but has two
problems: one, it's possible to cause the origin server to fill its disk
if the slot doesn't advance in time; and also there's a disconnect
between state passed down via the startup process and GUCs that
walreceiver reads directly.
We handle the first problem by setting the option to disabled by
default. If the user enables it, its on their head to make sure that
disk doesn't fill up.
We handle the second problem by passing the flag via startup rather than
having walreceiver acquire it directly, and making it PGC_POSTMASTER
(which ensures a walreceiver always has the fresh value). A future
commit can relax this (to PGC_SIGHUP again) by having the startup
process signal walreceiver to shutdown whenever the value changes.
Author: Sergei Kornilov <sk@zsrv.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20200122055510.GH174860@paquier.xyz
The new command-line switch --include-foreign-data=PATTERN lets the user
specify foreign servers from which to dump foreign table data. This can
be refined by further inclusion/exclusion switches, so that the user has
full control over which tables to dump.
A limitation is that this doesn't work in combination with parallel
dumps, for implementation reasons. This might be lifted in the future,
but requires shuffling some code around.
Author: Luis Carril <luis.carril@swarm64.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Surafel Temesgen <surafel3000@gmail.com>
Reviewed-by: vignesh C <vignesh21@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@2ndQuadrant.com>
Discussion: https://postgr.es/m/LEJPR01MB0185483C0079D2F651B16231E7FC0@LEJPR01MB0185.DEUPRD01.PROD.OUTLOOK.DE
Now that we require C99, we can depend on __VA_ARGS__ to work, and
revising ereport() to use it has several significant benefits:
* The extra parentheses around the auxiliary function calls are now
optional. Aside from being a bit less ugly, this removes a common
gotcha for new contributors, because in some cases the compiler errors
you got from forgetting them were unintelligible.
* The auxiliary function calls are now evaluated as a comma expression
list rather than as extra arguments to errfinish(). This means that
compilers can be expected to warn about no-op expressions in the list,
allowing detection of several other common mistakes such as forgetting
to add errmsg(...) when converting an elog() call to ereport().
* Unlike the situation with extra function arguments, comma expressions
are guaranteed to be evaluated left-to-right, so this removes platform
dependency in the order of the auxiliary function calls. While that
dependency hasn't caused us big problems in the past, this change does
allow dropping some rather shaky assumptions around errcontext() domain
handling.
There's no intention to make wholesale changes of existing ereport
calls, but as proof-of-concept this patch removes the extra parens
from a couple of calls in postgres.c.
While new code can be written either way, code intended to be
back-patched will need to use extra parens for awhile yet. It seems
worth back-patching this change into v12, so as to reduce the window
where we have to be careful about that by one year. Hence, this patch
is careful to preserve ABI compatibility; a followup HEAD-only patch
will make some additional simplifications.
Andres Freund and Tom Lane
Discussion: https://postgr.es/m/CA+fd4k6N8EjNvZpM8nme+y+05mz-SM8Z_BgkixzkA34R+ej0Kw@mail.gmail.com
Previously if a promotion was triggered while recovery was paused,
the paused state continued. Also recovery could be paused by executing
pg_wal_replay_pause() even while a promotion was ongoing. That is,
recovery pause had higher priority over a standby promotion.
But this behavior was not desirable because most users basically wanted
the recovery to complete as soon as possible and the server to become
the master when they requested a promotion.
This commit changes recovery so that it prefers a promotion over
recovery pause. That is, if a promotion is triggered while recovery
is paused, the paused state ends and a promotion continues. Also
this commit makes recovery pause functions like pg_wal_replay_pause()
throw an error if they are executed while a promotion is ongoing.
Internally, this commit adds new internal function PromoteIsTriggered()
that returns true if a promotion is triggered. Since the name of
this function and the existing function IsPromoteTriggered() are
confusingly similar, the commit changes the name of IsPromoteTriggered()
to IsPromoteSignaled, as more appropriate name.
Author: Fujii Masao
Reviewed-by: Atsushi Torikoshi, Sergei Kornilov
Discussion: https://postgr.es/m/00c194b2-dbbb-2e8a-5b39-13f14048ef0a@oss.nttdata.com
This commit introduces new wait events BackupWaitWalArchive and
RecoveryPause. The former is reported while waiting for the WAL files
required for the backup to be successfully archived. The latter is
reported while waiting for recovery in pause state to be resumed.
Author: Fujii Masao
Reviewed-by: Michael Paquier, Atsushi Torikoshi, Robert Haas
Discussion: https://postgr.es/m/f0651f8c-9c96-9f29-0ff9-80414a15308a@oss.nttdata.com
Previously 0 was reported in pg_stat_progress_basebackup.total_backup
if the total backup size was not estimated. Per discussion, our consensus
is that NULL is better choise as the value in total_backup in that case.
So this commit makes pg_stat_progress_basebackup view report NULL
in total_backup column if the estimation is disabled.
Bump catversion.
Author: Fujii Masao
Reviewed-by: Amit Langote, Magnus Hagander, Alvaro Herrera
Discussion: https://postgr.es/m/CABUevExnhOD89zBDuPvfAAh243RzNpwCPEWNLtMYpKHMB8gbAQ@mail.gmail.com
src/port/getopt_long.c failed on such an argument, always seeing it
as an unrecognized switch. This is unhelpful; better is to treat such
an item as a non-switch argument. That behavior is what we find in
GNU's getopt_long(); it's what src/port/getopt.c does; and it is
required by POSIX for getopt(), which getopt_long() ought to be
generally a superset of. Moreover, it's expected by ecpg, which
intends an argument of "-" to mean "read from stdin". So fix it.
Also add some documentation about ecpg's behavior in this area, since
that was miserably underdocumented. I had to reverse-engineer it
from the code.
Per bug #16304 from James Gray. Back-patch to all supported branches,
since this has been broken forever.
Discussion: https://postgr.es/m/16304-c662b00a1322db7f@postgresql.org
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Back-patch to 9.5 (all supported versions). This introduces a new WAL
record type, XLOG_GIST_ASSIGN_LSN, without bumping XLOG_PAGE_MAGIC. As
always, update standby systems before master systems. This changes
sizeof(RelationData) and sizeof(IndexStmt), breaking binary
compatibility for affected extensions. (The most recent commit to
affect the same class of extensions was
089e4d405d0f3b94c74a2c6a54357a84a681754b.)
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
This patch adds the pseudo-types anycompatible, anycompatiblearray,
anycompatiblenonarray, and anycompatiblerange. They work much like
anyelement, anyarray, anynonarray, and anyrange respectively, except
that the actual input values need not match precisely in type.
Instead, if we can find a common supertype (using the same rules
as for UNION/CASE type resolution), then the parser automatically
promotes the input values to that type. For example,
"myfunc(anycompatible, anycompatible)" can match a call with one
integer and one bigint argument, with the integer automatically
promoted to bigint. With anyelement in the definition, the user
would have had to cast the integer explicitly.
The new types also provide a second, independent set of type variables
for function matching; thus with "myfunc(anyelement, anyelement,
anycompatible) returns anycompatible" the first two arguments are
constrained to be the same type, but the third can be some other
type, and the result has the type of the third argument. The need
for more than one set of type variables was foreseen back when we
first invented the polymorphic types, but we never did anything
about it.
Pavel Stehule, revised a bit by me
Discussion: https://postgr.es/m/CAFj8pRDna7VqNi8gR+Tt2Ktmz0cq5G93guc3Sbn_NVPLdXAkqA@mail.gmail.com
This commit changes pg_basebackup so that it specifies PROGRESS option in
BASE_BACKUP replication command whether --progress is specified or not.
This causes the server to estimate the total backup size and report it in
pg_stat_progress_basebackup.backup_total, by default. This is reasonable
default because the time required for the estimation would not be so large
in most cases.
Also this commit adds new option --no-estimate-size to pg_basebackup.
This option prevents the server from the estimation, and so is useful to
avoid such estimation time if it's too long.
Author: Fujii Masao
Reviewed-by: Magnus Hagander, Amit Langote
Discussion: https://postgr.es/m/CABUevEyDPPSjP7KRvfTXPdqOdY5aWNkqsB5aAXs3bco5ZwtGHg@mail.gmail.com
This commit renames RecoveryWalAll and RecoveryWalStream wait events to
RecoveryWalStream and RecoveryRetrieveRetryInterval, respectively,
in order to make the names and what they are more consistent. For example,
previously RecoveryWalAll was reported as a wait event while the recovery
was waiting for WAL from a stream, and which was confusing because the name
was very different from the situation where the wait actually could happen.
The names of macro variables for those wait events also are renamed
accordingly.
This commit also changes the category of RecoveryRetrieveRetryInterval to
Timeout from Activity because the wait event is reported while waiting based
on wal_retrieve_retry_interval.
Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Atsushi Torikoshi
Discussion: https://postgr.es/m/124997ee-096a-5d09-d8da-2c7a57d0816e@oss.nttdata.com
While performing hash aggregation, track memory usage when adding new
groups to a hash table. If the memory usage exceeds work_mem, enter
"spill mode".
In spill mode, new groups are not created in the hash table(s), but
existing groups continue to be advanced if input tuples match. Tuples
that would cause a new group to be created are instead spilled to a
logical tape to be processed later.
The tuples are spilled in a partitioned fashion. When all tuples from
the outer plan are processed (either by advancing the group or
spilling the tuple), finalize and emit the groups from the hash
table. Then, create new batches of work from the spilled partitions,
and select one of the saved batches and process it (possibly spilling
recursively).
Author: Jeff Davis
Reviewed-by: Tomas Vondra, Adam Lee, Justin Pryzby, Taylor Vesely, Melanie Plageman
Discussion: https://postgr.es/m/507ac540ec7c20136364b5272acbcd4574aa76ef.camel@j-davis.com
Commit d06215d03b added a new attribute to pg_statistic_ext catalog, but
failed to add it to document it properly.
Reported-by: Noriyoshi Shinoda <noriyoshi.shinoda@hpe.com>
This commit corrects the descriptions of RecoveryWalAll and RecoveryWalStream
wait events in the documentation.
Back-patch to v10 where those wait events were added.
Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Atsushi Torikoshi
Discussion: https://postgr.es/m/124997ee-096a-5d09-d8da-2c7a57d0816e@oss.nttdata.com
Add missing index entries, add missing information on pg_upgrade man
page, order things alphabetical instead of (apparently) in the order
they were implemented, reduce repetitiveness a bit.
Fujii Masao
Tomas Vondra
Tom Lane
Peter Eisentraut
Alexander Korotkov
Michael Paquier
Bruce Momjian
Magnus Hagander
David Rowley
Alvaro Herrera
Andres Freund
Noah Misch
Jeff Davis