Lc_collate and lc_ctype have been per-database settings since server version
8.4, but pg_upgrade was still treating them as cluster-wide options. It
fetched the values for the template0 databases in old and new cluster, and
compared them. That's backwards; the encoding and locale of the template0
database doesn't matter, as template0 is guaranteed to contain only ASCII
characters. But if there are any other databases that exist on both clusters
(in particular template1 and postgres databases), their encodings and
locales must be compatible.
Also, make the locale comparison more lenient. If the locale names are not
equal, try to canonicalize both of them by passing them to setlocale(). We
used to do that only when upgrading from 9.1 or below, but it seems like a
good idea even with newer versions. If we change the canonical form of a
locale, this allows pg_upgrade to still work. I'm about to do just that to
fix bug #11431, by mapping a locale name that contains non-ASCII characters
to a pure-ASCII alias of the same locale.
No backpatching, because earlier versions of pg_upgrade still support
upgrading from 8.3 servers. That would be more complicated, so it doesn't
seem worth it, given that we haven't received any complaints about this
from users.
Previously, TOAST tables only required in the new cluster could cause
oid conflicts if they were auto-numbered and a later conflicting oid had
to be assigned.
Backpatch through 9.3
Checksums are set immediately prior to flush out of shared buffers
and checked when pages are read in again. Hint bit setting will
require full page write when block is dirtied, which causes various
infrastructure changes. Extensive comments, docs and README.
WARNING message thrown if checksum fails on non-all zeroes page;
ERROR thrown but can be disabled with ignore_checksum_failure = on.
Feature enabled by an initdb option, since transition from option off
to option on is long and complex and has not yet been implemented.
Default is not to use checksums.
Checksum used is WAL CRC-32 truncated to 16-bits.
Simon Riggs, Jeff Davis, Greg Smith
Wide input and assistance from many community members. Thank you.
libpgcommon is a new static library to allow sharing code among the
various frontend programs and backend; this lets us eliminate duplicate
implementations of common routines. We avoid libpgport, because that's
intended as a place for porting issues; per discussion, it seems better
to keep them separate.
The first use case, and the only implemented by this patch, is pg_malloc
and friends, which many frontend programs were already using.
At the same time, we can use this to provide palloc emulation functions
for the frontend; this way, some palloc-using files in the backend can
also be used by the frontend cleanly. To do this, we change palloc() in
the backend to be a function instead of a macro on top of
MemoryContextAlloc(). This was previously believed to cause loss of
performance, but this implementation has been tweaked by Tom and Andres
so that on modern compilers it provides a slight improvement over the
previous one.
This lets us clean up some places that were already with
localized hacks.
Most of the pg_malloc/palloc changes in this patch were authored by
Andres Freund. Zoltán Böszörményi also independently provided a form of
that. libpgcommon infrastructure was authored by Álvaro.
This patch introduces two additional lock modes for tuples: "SELECT FOR
KEY SHARE" and "SELECT FOR NO KEY UPDATE". These don't block each
other, in contrast with already existing "SELECT FOR SHARE" and "SELECT
FOR UPDATE". UPDATE commands that do not modify the values stored in
the columns that are part of the key of the tuple now grab a SELECT FOR
NO KEY UPDATE lock on the tuple, allowing them to proceed concurrently
with tuple locks of the FOR KEY SHARE variety.
Foreign key triggers now use FOR KEY SHARE instead of FOR SHARE; this
means the concurrency improvement applies to them, which is the whole
point of this patch.
The added tuple lock semantics require some rejiggering of the multixact
module, so that the locking level that each transaction is holding can
be stored alongside its Xid. Also, multixacts now need to persist
across server restarts and crashes, because they can now represent not
only tuple locks, but also tuple updates. This means we need more
careful tracking of lifetime of pg_multixact SLRU files; since they now
persist longer, we require more infrastructure to figure out when they
can be removed. pg_upgrade also needs to be careful to copy
pg_multixact files over from the old server to the new, or at least part
of multixact.c state, depending on the versions of the old and new
servers.
Tuple time qualification rules (HeapTupleSatisfies routines) need to be
careful not to consider tuples with the "is multi" infomask bit set as
being only locked; they might need to look up MultiXact values (i.e.
possibly do pg_multixact I/O) to find out the Xid that updated a tuple,
whereas they previously were assured to only use information readily
available from the tuple header. This is considered acceptable, because
the extra I/O would involve cases that would previously cause some
commands to block waiting for concurrent transactions to finish.
Another important change is the fact that locking tuples that have
previously been updated causes the future versions to be marked as
locked, too; this is essential for correctness of foreign key checks.
This causes additional WAL-logging, also (there was previously a single
WAL record for a locked tuple; now there are as many as updated copies
of the tuple there exist.)
With all this in place, contention related to tuples being checked by
foreign key rules should be much reduced.
As a bonus, the old behavior that a subtransaction grabbing a stronger
tuple lock than the parent (sub)transaction held on a given tuple and
later aborting caused the weaker lock to be lost, has been fixed.
Many new spec files were added for isolation tester framework, to ensure
overall behavior is sane. There's probably room for several more tests.
There were several reviewers of this patch; in particular, Noah Misch
and Andres Freund spent considerable time in it. Original idea for the
patch came from Simon Riggs, after a problem report by Joel Jacobson.
Most code is from me, with contributions from Marti Raudsepp, Alexander
Shulgin, Noah Misch and Andres Freund.
This patch was discussed in several pgsql-hackers threads; the most
important start at the following message-ids:
AANLkTimo9XVcEzfiBR-ut3KVNDkjm2Vxh+t8kAmWjPuv@mail.gmail.com1290721684-sup-3951@alvh.no-ip.org1294953201-sup-2099@alvh.no-ip.org1320343602-sup-2290@alvh.no-ip.org1339690386-sup-8927@alvh.no-ip.org4FE5FF020200002500048A3D@gw.wicourts.gov4FEAB90A0200002500048B7D@gw.wicourts.gov
Because the client encoding might not match the server encoding,
pg_upgrade can't allocate NAMEDATALEN bytes for storage of database,
relation, and namespace identifiers. Instead pg_strdup() the memory and
free it.
Also add C comment in initdb.c about safe NAMEDATALEN usage.
Pg_upgrade displays file names during copy and database names during
dump/restore. Andrew Dunstan identified three bugs:
* long file names were being truncated to 60 _leading_ characters, which
often do not change for long file names
* file names were truncated to 60 characters in log files
* carriage returns were being output to log files
This commit fixes these --- it prints 60 _trailing_ characters to the
status display, and full path names without carriage returns to log
files. It also suppresses status output to the log file unless verbose
mode is used.
--single-transaction to restore each database schema. This yields
performance improvements for databases with many tables. Also, remove
split_old_dump() as it is no longer needed.
existence via open(), rather than collecting a directory listing and
looking up matching relfilenode files with sequential scans of the
array. This speeds up pg_upgrade by 2x for a large number of tables,
e.g. 16k.
Per observation by Ants Aasma.
pg_upgrade produces a platform-specific script to remove the old
directory, but on Windows it has not been making sure that the
paths it writes as arguments for rmdir and del use the backslash
path separator, which will cause these scripts to fail.
The fix is backpatched to Release 9.0.
When starting either an old or new postmaster, force it to place its Unix
socket in the current directory. This makes it even harder for accidental
connections to occur during pg_upgrade, and also works around some
scenarios where the default socket location isn't usable. (For example,
if the default location is something other than "/tmp", it might not exist
during "make check".)
When checking an already-running old postmaster, find out its actual socket
directory location from postmaster.pid, if possible. This dodges problems
with an old postmaster having a configured location different from the
default built into pg_upgrade's libpq. We can't find that out if the old
postmaster is pre-9.1, so also document how to cope with such scenarios
manually.
In support of this, centralize handling of the connection-related command
line options passed to pg_upgrade's subsidiary programs, such as pg_dump.
This should make future changes easier.
Bruce Momjian and Tom Lane
The previous signature made it very easy to pass something other than
the printf-format specifier in the corresponding position, without any
warning from the compiler.
While at it, move some of the escaping, redirecting and quoting
responsibilities from the callers into exec_prog() itself. This makes
the callsites cleaner.
4741e9afb9. This was done by adding an
optional second log file parameter to exec_prog(), and closing and
reopening the log file between system() calls.
Backpatch to 9.2.
Since the scandir() emulation was taken out of pg_upgrade, there's
no longer any need for scandir_file_pattern to exist as a global
variable. Replace it with a local in the one remaining function
that was making use of it.
Error out on out-of-memory, rather than returning -1, which the sole
existing caller wasn't checking for anyway. There doesn't seem to be
any use-case for making the caller check for failure here.
Detect failure return from readdir().
Use a less platform-dependent method of calculating the entrysize.
It's possible, but not yet confirmed, that this explains bug #6733,
in which Mike Wilson reports a pg_upgrade crash that did not occur
in 9.1. (Note that load_directory is effectively new code in 9.2,
at least on platforms that have scandir().)
Fix up comments, avoid uselessly using two counters, reduce the number
of realloc calls to something sane.
The xlogid + segno representation of a particular WAL segment doesn't make
much sense in pg_resetxlog anymore, now that we don't use that anywhere
else. Use the WAL filename instead, since that's a convenient way to name a
particular WAL segment.
I did this partially for pg_resetxlog in the original xlogid/segno -> uint64
patch, but I neglected pg_upgrade and the docs. This should now be more
complete.
default tablespace, but part of a database that is in a user-defined
tablespace. Caused "file not found" error during upgrade.
Per bug report from Ants Aasma.
Backpatch to 9.1 and 9.0.
Bruce Momjian
Heikki Linnakangas
Robert Haas
Peter Eisentraut
Simon Riggs
Alvaro Herrera
Andrew Dunstan
Tom Lane