Add another edge-case value to "point_tbl", and add a test for
the line(point, point) function.
Some of the behaviors exposed here are wrong, but the idea of
committing this separately is to memorialize what we were getting,
and to allow easier inspection of the behavior changes caused by
upcoming patches.
Kyotaro Horiguchi (line() test added by me)
Discussion: https://postgr.es/m/CAGf+fX70rWFOk5cd00uMfa__0yP+vtQg5ck7c2Onb-Yczp0URA@mail.gmail.com
As per discussion with Peter Eisentraunt, the SQL standard specifies
that any tuple insertion done as part of CREATE TABLE AS happens without
any extra ACL check, so it makes little sense to keep a check for INSERT
privileges when using WITH DATA. Materialized views are not part of the
standard, but similarly, this check can be confusing as this refers to
an access check on a table created within the same command as the one
that would insert data into this table.
This commit removes the INSERT privilege check for WITH DATA, the
default, that 846005e removed partially, but only for WITH NO DATA.
Author: Bharath Rupireddy
Discussion: https://postgr.es/m/d049c272-9a47-d783-46b0-46665b011598@enterprisedb.com
Remove the ability to select random number generator independently from
SSL library. Instead, use the random number generator from the SSL
library (today only OpenSSL supported) if one is configured. If no SSL
library is configured, use the platform default (which means use
CryptoAPI on Win32 and /dev/urandom on Linux).
This also restructures pg_strong_random.c to have three clearly separate
sections, one for each implementation, with two functions in each,
instead of a scattered set of ifdefs throughout the whole file.
Author: Daniel Gustafsson, Magnus Hagander, Michael Paquier
Discussion: https://postgr.es/m/632623.1605460616@sss.pgh.pa.us
Previously, when restore_command claimed to succeed but failed to restore
the file with the right name, for example, due to mis-configuration of
restore_command, no log message was reported. Then the recovery failed
later with an error message not directly related to the issue.
This commit changes the recovery so that a log message is emitted in
this error case. This would enable us to investigate what happened in
this case more easily.
Author: Jeff Janes, Fujii Masao
Reviewed-by: Pavel Borisov, Kyotaro Horiguchi
Discussion: https://postgr.es/m/CAMkU=1xkFs3Omp4JR4wMYWdam_KLuj6LXnTYfU8u3T0h=PLLMQ@mail.gmail.com
We previously put the -isysroot switch only into CPPFLAGS, theorizing
that it was only needed to find the right copies of include files.
However, it seems that we also need to use it while linking programs,
to find the right stub ".tbd" files for libraries. We got away
without that up to now, but apparently that was mostly luck. It may
also be that failures are only observed when the Xcode version is
noticeably out of sync with the host macOS version; the case that's
prompting action right now is that builds fail when using latest Xcode
(12.2) on macOS Catalina, even though it's fine on Big Sur.
Hence, add -isysroot to LDFLAGS as well. (It seems that the more
common practice is to put it in CFLAGS, whence it'd be included at
both compile and link steps. However, we can't mess with CFLAGS in
the platform template file without confusing configure's logic for
choosing default CFLAGS.)
This should be back-patched, but first let's see if the buildfarm
likes it on HEAD.
Report and patch by James Hilliard (some cosmetic mods by me)
Discussion: https://postgr.es/m/20201120003314.20560-1-james.hilliard1@gmail.com
This feature was added a long time ago, in 7c1e67bd5 and eb121ba2c,
but never documented in any user-facing way. (Documentation added
in 6126d3e70 was commented out almost immediately, in 8272fc3f7.)
That's because, while this syntax is defined by SQL:99, our
implementation is only vaguely related to the standard's semantics.
The standard appears to intend a run-time not parse-time test, and
it definitely intends that the test should understand subtype
relationships.
No one has stepped up to fix that in the intervening years, but
people keep coming across the code and asking why it's not documented.
Let's just get rid of it: if anyone ever wants to make it work per
spec, they can easily recover whatever parts of this code are still
of value from our git history.
If there's anyone out there who's actually using this despite its
undocumented status, they can switch to using pg_typeof() instead,
eg. "pg_typeof(something) = 'mytype'::regtype". That gives
essentially the same semantics as what our IS OF code did.
(We didn't have that function last time this was discussed, or
we would have ripped out IS OF then.)
Discussion: https://postgr.es/m/CAKFQuwZ2pTc-DSkOiTfjauqLYkNREeNZvWmeg12Q-_69D+sYZA@mail.gmail.com
Discussion: https://postgr.es/m/BAY20-F23E9F2B4DAB3E4E88D3623F99B0@phx.gbl
Discussion: https://postgr.es/m/3E7CF81D.1000203@joeconway.com
Commit 502898192 was too careless about the order of execution of the
additional ALTER TABLE operations generated by expandTableLikeClause.
It just stuck them all at the end, which seems okay for most purposes.
But it falls down in the case where LIKE is importing a primary key
or unique index and the outer CREATE TABLE includes a FOREIGN KEY
constraint that needs to depend on that index. Weird as that is,
it used to work, so we ought to keep it working.
To fix, make parse_utilcmd.c insert LIKE clauses between index-creation
and FK-creation commands in the transformed list of commands, and change
utility.c so that the commands generated by expandTableLikeClause are
executed immediately not at the end. One could imagine scenarios where
this wouldn't work either; but currently expandTableLikeClause only
makes column default expressions, CHECK constraints, and indexes, and
this ordering seems fine for those.
Per bug #16730 from Sofoklis Papasofokli. Like the previous patch,
back-patch to all supported branches.
Discussion: https://postgr.es/m/16730-b902f7e6e0276b30@postgresql.org
In 01e658fa74, the hash_func test
creates a type t1, but apparently a test running in parallel might
also use that name, depending on timing. Rename the type to avoid the
issue.
Add hash functions for the record type as well as a hash operator
family and operator class for the record type. This enables all the
hash functionality for the record type such as hash-based plans for
UNION/INTERSECT/EXCEPT DISTINCT, recursive queries using UNION
DISTINCT, hash joins, and hash partitioning.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/38eccd35-4e2d-6767-1b3c-dada1eac3124%402ndquadrant.com
Similarly to 3636efa, the checks done in pg_dump when parsing array
values from catalogs have been too lax. Under memory pressure, it could
be possible, though very unlikely, to finish with dumps that miss some
data like:
- Statistics for indexes
- Run-time configuration of functions
- Configuration of extensions
- Publication list for a subscription
No backpatch is done as this is not going to be a problem in practice.
For example, if an OOM causes an array parsing to fail, a follow-up code
path of pg_dump would most likely complain with an allocation failure
due to the memory pressure.
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/20201111061319.GE2276@paquier.xyz
We don't actually need a lock to set PGPROC->statusFlags itself; what we
do need is a shared lock on either XidGenLock or ProcArrayLock in order to
ensure MyProc->pgxactoff keeps still while we modify the mirror array in
ProcGlobal->statusFlags. Some places were using an exclusive lock for
that, which is excessive. Relax those to use shared lock only.
procarray.c has a couple of places with somewhat brittle assumptions
about PGPROC changes: ProcArrayEndTransaction uses only shared lock, so
it's permissible to change MyProc only. On the other hand,
ProcArrayEndTransactionInternal also changes other procs, so it must
hold exclusive lock. Add asserts to ensure those assumptions continue
to hold.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/20201117155501.GA13805@alvherre.pgsql
Bug #16652 complains that pg_reload_conf() returned true, even though
the configuration file contained errors. That's the way pg_reload_conf()
works, by design, but the documentation wasn't very clear on it. Clarify
that a 'true' return value only means that the signal was sent
successfully. Also add links to the system views that can be used to
check the configuration files for errors.
David G. Johnston, with some rewording by me.
Discussion: https://www.postgresql.org/message-id/CAKFQuwax6GxhUQEes0D045UtXG-fBraM39_6UMd5JyR5K1HWCQ%40mail.gmail.com
- Test hashing of an array of a non-hashable element type.
- Test UNION [DISTINCT] with hash- and sort-based plans. (Previously,
only INTERSECT and EXCEPT where tested there.)
- Test UNION [DISTINCT] with a non-hashable column type. This
currently reverts to a sort-based plan even if enable_hashagg is on.
- Test UNION/INTERSECT/EXCEPT hash- and sort-based plans with arrays
as column types. Also test an array with a non-hashable element
type.
- Test UNION/INTERSECT/EXCEPT similarly with row types as column
types. Currently, this uses only sort-based plans because there is
no hashing support for row types.
- Add a test case that shows that recursive queries using UNION
[DISTINCT] require hashable column types.
- Add a currently failing test that uses UNION DISTINCT in a
cycle-detection use case using row types as column types.
Discussion: https://www.postgresql.org/message-id/flat/38eccd35-4e2d-6767-1b3c-dada1eac3124%402ndquadrant.com
Streamline handling of the various strategies that we have to avoid a
page split in nbtinsert.c. When it looks like a leaf page is about to
overflow, we now perform deleting LP_DEAD items and deduplication in one
central place. This greatly simplifies _bt_findinsertloc().
This has an independently useful consequence: nbtree no longer relies on
the BTP_HAS_GARBAGE page level flag/hint for anything important. We
still set and unset the flag in the same way as before, but it's no
longer treated as a gating condition when considering if we should check
for already-set LP_DEAD bits. This happens at the point where the page
looks like it might have to be split anyway, so simply checking the
LP_DEAD bits in passing is practically free. This avoids missing
LP_DEAD bits just because the page-level hint is unset, which is
probably reasonably common (e.g. it happens when VACUUM unsets the
page-level flag without actually removing index tuples whose LP_DEAD-bit
was set recently, after the VACUUM operation began but before it reached
the leaf page in question).
Note that this isn't a big behavioral change compared to PostgreSQL 13.
We were already checking for set LP_DEAD bits regardless of whether the
BTP_HAS_GARBAGE page level flag was set before we considered doing a
deduplication pass. This commit only goes slightly further by doing the
same check for all indexes, even indexes where deduplication won't be
performed.
We don't completely remove the BTP_HAS_GARBAGE flag. We still rely on
it as a gating condition with pg_upgrade'd indexes from before B-tree
version 4/PostgreSQL 12. That makes sense because we sometimes have to
make a choice among pages full of duplicates when inserting a tuple with
pre version 4 indexes. It probably still pays to avoid accessing the
line pointer array of a page there, since it won't yet be clear whether
we'll insert on to the page in question at all, let alone split it as a
result.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Victor Yegorov <vyegorov@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wz%3DYpc1PDdk8OVJDChGJBjT06%3DA0Mbv9HyTLCsOknGcUFg%40mail.gmail.com
Stop naming special area/opaque pointer variables 'lpageop' in contexts
where it doesn't make sense. This is a holdover from a time when logic
that performs tasks that are now spread across _bt_insertonpg(),
_bt_findinsertloc(), and _bt_split() was more centralized. 'lpageop'
denotes "left page", which doesn't make sense outside of contexts in
which there isn't also a right page.
Also acquire page flag variables up front within _bt_insertonpg(). This
makes it closer to _bt_split() following refactoring commit bc3087b626.
This allows the page split and retail insert paths to both make use of
the same variables.
In streaming mode, the transaction can be decoded in multiple streams and
those streams can be interleaved with streams of other transactions. So,
we can't remember the transaction's write status in the logical decoding
context because that might get changed due to some other transactions and
lead to wrong answers for 'skip-empty-xacts' option. We decided to keep
each transaction's write status in the ReorderBufferTxn to avoid
interleaved streams changing the status of some unrelated transactions.
Diagnosed-by: Amit Kapila
Author: Dilip Kumar
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1LR7=XNM_TLmpZMFuV8ZQpoxkem--NZJYf8YXmesbvwLA@mail.gmail.com
Otherwise, if FDDEBUG is enabled, the debugging output fails because
it tries to read the fileName, which isn't set up yet (and should in
fact always be NULL).
AFAICT, this has been wrong since Berkeley. Before 96bf88d52,
it would accidentally fail to crash on platforms where snprintf()
is forgiving about being passed a NULL pointer for %s; but the
file name intended to be included in the debug output wouldn't
ever have shown up.
Report and fix by Greg Nancarrow. Although this is only visibly
broken in custom-made builds, it still seems worth back-patching
to all supported branches, as the FDDEBUG code is pretty useless
as it stands.
Discussion: https://postgr.es/m/CAJcOf-cUDgm9qYtC_B6XrC6MktMPNRby2p61EtSGZKnfotMArw@mail.gmail.com
Since this function is used as a CHECK constraint condition,
returning NULL is tantamount to returning TRUE, which would have the
effect of letting in a row that doesn't satisfy the hash condition.
Admittedly, the cases for which this is done should be unreachable
in practice, but that doesn't make it any less a bad idea. It also
seems like a dartboard was used to decide which error cases should
throw errors as opposed to returning NULL.
For the checks for NULL input values, I just switched it to returning
false. There's some argument that an error would be better; but the
case really should be can't-happen in a generated hash constraint,
so it's likely not worth more code for.
For the parent-relation-open-failure case, it seems like we might
as well let relation_open throw an error, instead of having an
impossible-to-diagnose constraint failure.
Back-patch to v11 where this code came in.
Discussion: https://postgr.es/m/24067.1605134819@sss.pgh.pa.us
This was evidently missed in commit 6337865f3, which generally did
s/TRUE/true/ everywhere. It escaped notice up to now because ICU
versions before ICU 68 provided definitions of "TRUE" and "FALSE"
regardless. With ICU 68, it fails to compile.
Per report from Condor. Back-patch to v11 where 6337865f3 came in.
(I've not tested v10, where this call originated, but I imagine
it's fine since we defined TRUE in c.h back then.)
Discussion: https://postgr.es/m/7a6f3336165bfe3ca66abcda7966f9d0@stz-bg.com
This commit changes the startup process in the standby server so that
it handles the interrupt signals after waiting for wal_retrieve_retry_interval
on the latch and resetting it, before entering another wait on the latch.
This change causes the standby server to promptly handle interrupt signals.
Otherwise, previously, there was the case where the standby needs to
wait extra five seconds to shutdown when the shutdown request arrived
while the startup process was waiting for wal_retrieve_retry_interval
on the latch.
Author: Fujii Masao, but implementation idea is from Soumyadeep Chakraborty
Reviewed-by: Soumyadeep Chakraborty
Discussion: https://postgr.es/m/9d7e6ab0-8a53-ddb9-63cd-289bcb25fe0e@oss.nttdata.com
When specified, WITH NO DATA does not insert any data into the relation
created, so skip checking for the insert permissions. With WITH DATA or
WITH NO DATA, it is always required for the user to have CREATE
privileges on the schema targeted for the relation.
Note that plain CREATE TABLE AS or CREATE MATERIALIZED VIEW queries have
begun to work accidentally without INSERT privilege checks as of
874fe3ae, while using EXECUTE or EXPLAIN ANALYZE would fail with the ACL
check, so this makes the behavior for all the command flavors consistent
with each other. This is arguably a bug fix, but there have been no
complaints about the current behavior either so stable branches are not
changed.
While on it, document properly the privileges requirements for each
commands with more tests for all the scenarios possible, and avoid a
useless bulk-insert allocation when using WITH NO DATA.
Author: Bharath Rupireddy
Reviewed-by: Anastasia Lubennikova, Michael Paquier
Discussion: https://postgr.es/m/CALj2ACWc3N8j0_9nMPz9wcAUnVcdKHzFdDZJ3hVFNEbqtcyG9w@mail.gmail.com
These flags should be independent: in particular an index AM should
be able to say that it supports include columns without necessarily
supporting multiple key columns. The included-columns patch got
this wrong, possibly aided by the fact that it didn't bother to
update the documentation.
While here, clarify some text about amcanreturn, which was a little
vague about what should happen when amcanreturn reports that only
some of the index columns are returnable.
Noted while reviewing the SP-GiST included-columns patch, which
quite incorrectly (and unsafely) changed SP-GiST to claim
amcanmulticol = true as a workaround for this bug.
Backpatch to v11 where included columns were introduced.
Only a basic logic bug in a _bt_insertonpg() caller could lead to a
violation of this invariant (index corruption won't do it). A "can't
happen" error seems inappropriate (it is arbitrary at best).
Demote the error to a simple assertion. This matches similar nearby
sanity checks.
Buildfarm members that lack both HAVE_LOCALE_T and USE_ICU have been
complaining about pg_newlocale_from_collation's collcollate variable.
This is evidently fallout from commit 7d1297df0, which removed the
only usage outside those two #ifdef'd code paths. Mark the variable
pg_attribute_unused(), like its sibling collctype, which has been that
way for a long time.
The test inserts a row in primary server, waits until the insertion has
been replicated to a cascaded standby, and checks that it's visible there
by querying the cascaded standby. In order for that to work reliably, the
test needs to wait until the insertion WAL record has been fully replayed.
This should fix the occasional buildfarm failures. Diagnosis by Tom Lane.
Discussion: https://www.postgresql.org/message-id/606796.1605424022@sss.pgh.pa.us
Obviously, in order to equality operator be satisfiable, target string must
contain all the trigrams of the search string. On this base, we implement
equality operator in GiST/GIN indexes with recheck.
Discussion: https://postgr.es/m/CAOBaU_YWwtT7tdggtROacjdOdeYHCz-tmSwuC-j-TOG-g97J0w%40mail.gmail.com
Author: Julien Rouhaud
Reviewed-by: Tom Lane, Alexander Korotkov, Georgios Kokolatos, Erik Rijkers
This is mostly straightforward. However, we disallow replacing
constraint triggers or changing the is-constraint property; perhaps
that can be added later, but the complexity versus benefit tradeoff
doesn't look very good.
Also, no special thought is taken here for whether replacing an
existing trigger should result in changes to queued-but-not-fired
trigger actions. We just document that if you're surprised by the
results, too bad, don't do that. (Note that any such pending trigger
activity would have to be within the current session.)
Takamichi Osumi, reviewed at various times by Surafel Temesgen,
Peter Smith, and myself
Discussion: https://postgr.es/m/0DDF369B45A1B44B8A687ED43F06557C010BC362@G01JPEXMBYT03
This started with the intent to explain that range upper bounds
are exclusive, which previously you could only find out by reading
the CREATE TABLE man page. But I soon found that section 5.11
really could stand a fair amount of editorial attention. It's
apparently been revised several times without much concern for
overall flow, nor careful copy-editing.
Back-patch to v11, which is as far as the patch goes easily.
Per gripe from Edson Richter. Thanks to David Johnston for review.
Discussion: https://postgr.es/m/DM6PR13MB3988736CF8F5DC5720440231CFE60@DM6PR13MB3988.namprd13.prod.outlook.com
This provides a handy way to get, say, the last field of the string.
Use of a negative index in this way has precedent in the nearby
left() and right() functions.
The implementation scans the string twice when N < -1, but it seems
likely that N = -1 will be the huge majority of actual use cases,
so I'm not really excited about adding complexity to avoid that.
Nikhil Benesch, reviewed by Jacob Champion; cosmetic tweakage by me
Discussion: https://postgr.es/m/cbb7f861-6162-3a51-9823-97bc3aa0b638@gmail.com