errors. VACUUM normally compacts the table back-to-front, and stops
as soon as it gets to a page that it has moved some tuples onto.
(This logic doesn't make for a complete packing of the table, but it
should be pretty close.) But the way it was checking whether it had
got to a page with some moved-in tuples was to look at whether the
current page was the same as the last page of the list of pages that
have enough free space to be move-in targets. And there was other
code that would remove pages from that list once they got full.
There was a kluge that prevented the last list entry from being
removed, but it didn't get the job done. Fixed by keeping a separate
variable that contains the largest block number into which a tuple
has been moved. There's no longer any need to protect the last element
of the fraged_pages list.
Also, fix NOTICE messages to describe elapsed user/system CPU time
correctly.
1) datetime_pl_span() added the seconds field before adding the months
field. This lead to erroneous results for e.g.
select datetime '1999-11-30' + timespan '1 mon - 1 sec';
Reverse the order of operations to add months first.
2) tm2timespan() did all intermediate math as integer, converting to double
at the very end. This resulted in hidden overflows when given very large
integer days, hours, etc. For example,
select '74565 days'::timespan;
produced the wrong result. Change code to ensure that doubles are used
for intermediate calculations.
Thanks to Olivier PRENANT <ohp@pyrenet.fr> and
Tulassay Zsolt <zsolt@tek.bke.hu> for problem reports and to Tom Lane for
accurate analyses.
during InitProcessingMode and the CurrentTransactionState was neither
TRANS_DEFAULT nor TRANS_DISABLED. Unfortunately, after someone's recent
change to start the transaction manager earlier in startup than it used
to be started, that caused an abort() and consequent database system
reset on quite harmless errors (such as rejecting an invalid user name!).
As far as I can see, the test on CurrentTransactionState was completely
useless anyway, so I've removed it.
relcache entry no longer leaks a small amount of memory. index_endscan
now releases all the memory acquired by index_beginscan, so callers of it
should NOT pfree the scan descriptor anymore.
SELECT null::text;
SELECT int4fac(null);
work as expected now. In some cases a NULL must be surrounded by
parentheses:
SELECT 2 + null; fails
SELECT 2 + (null); OK
This is a grammatical ambiguity that seems difficult to avoid. Other
than that, NULLs seem to behave about like you'd expect. The internal
implementation is that NULL constants are typed as UNKNOWN (like
untyped string constants) until the parser can deduce the right type.
with DEC C.
DEC C doesn't handle double values greater than DBL_MAX, but some
PostgreSQL geo functions assign greater than DBL_MAX values to some vars
in some special cases - that couses SIGFPE. I dunno if that is the only place
to fix to work well with DEC C.
Kirill Nosov.
rather than returning a NaN for bogus input to pow(). Namely, HPUX 10.20.
I think this is sufficient evidence for what I thought all along, which
is that the float.c code *must* look at errno whether finite() exists or
not.
>go about this. That will risk breaking existing applications that use
>those names as column names.
>
>It should actually almost work to write sq.nextval as things stand,
>because Postgres has for a long time considered table.function and
>function(table) to be interchangeable notations for certain kinds of
>functions. nextval doesn't seem to be one of that kind of function,
>at the moment. I'd suggest leaving the grammar as it was, and taking a
>look at ParseFuncOrColumn in parse_func.c to see if you can't persuade
>it to accept the sequence functions in that style.
OK, good point. I tried to implement it somewhere else and ended up
extending transformAttr. Attached you'll find the patch.
Jeroen van Vianen
didn't have time for documentation yet, but I'll write some. There are
still some things to work out what happens when you alter or drop users,
but the group stuff in and by itself is done.
--
Peter Eisentraut Sernanders väg 10:115
equality. The lobits macro is wrong and extracts the wrong set of
bits out of the structure.
To exhibit the problem:
select '000000:000000'::macaddr = '000000:110000'::macaddr ;
?column?
--------
t
(1 row)
Daniel Boyd
triggered
> function now returns the right datatype.
Oops, I got crossed up with Jan's improvements. Ignore this.
--
Peter Eisentraut Sernanders väg 10:115
peter_e@gmx.net 75262 Uppsala
anywhere from zero to two TODO items.
* Allow flag to control COPY input/output of NULLs
I got this:
COPY table .... [ WITH NULL AS 'string' ]
which does what you'd expect. The default is \N, otherwise you can use
empty strings, etc. On Copy In this acts like a filter: every data item
that looks like 'string' becomes a NULL. Pretty straightforward.
This also seems to be related to
* Make postgres user have a password by default
If I recall this discussion correctly, the problem was actually that the
default password for the postgres (or any) user is in fact "\N", because
of the way copy is used. With this change, the file pg_pwd is copied out
with nulls as empty strings, so if someone doesn't have a password, the
password is just '', which one would expect from a new account. I don't
think anyone really wants a hard-coded default password.
Peter Eisentraut Sernanders väg 10:115
* Document/trigger/rule so changes to pg_shadow recreate pg_pwd
I did it with a trigger and it seems to work like a charm. The function
that already updates the file for create and alter user has been made a
built-in "SQL" function and a trigger is created at initdb time.
Comments around the pg_pwd updating function seem to be worried about
this
routine being called concurrently, but I really don't see a reason to
worry about this. Verify for yourself. I guess we never had a system
trigger before, so treat this with care, and feel free to adjust the
nomenclature as well.
--
Peter Eisentraut Sernanders väg 10:115
at all, and because of shell quoting rules this can't be fixed, so I put
in error messages to that end.
Also, calling create or drop database in a transaction block is not so
good either, because the file system mysteriously refuses to roll back rm
calls on transaction aborts. :) So I put in checks to see if a transaction
is in progress and signal an error.
Also I put the whole call in a transaction of its own to be able to roll
back changes to pg_database in case the file system operations fail.
The alternative location issues I posted recently were untouched, awaiting
the outcome of that discussion. Other than that, this should be much more
fool-proof now.
The docs I cleaned up as well.
Peter Eisentraut Sernanders väg 10:115
yet, but at least we can give a better error message:
regression=> select count(distinct f1) from int4_tbl;
ERROR: aggregate(DISTINCT ...) is not implemented yet
instead of 'parser: parse error at or near distinct'.
I was able to crash postgres 6.5.3 when I did an 'alter user' command.
After I started a debugger I found the problem in the timezone handling
of
datetime (my Linux box lost its timezone information, that's how the
problem occurred).
Only 7 bytes are reserved for the timezone, without checking for
boundaries.
Attached is a patch that fixes this problem and emits a NOTICE if a
timezone is encountered that is longer than MAXTZLEN bytes, like this:
Jeroen van Vianen
(which are palloc'd) instead of DLLists (which are malloc'd). Not very
significant, since this routine seldom has anything useful to do, but
a leak is a leak...
This one should work much better than the one I sent in previously. The
functionality is the same, but the patch was missing one file resulting
in
the compilation failing. The docs also received a minor fix.
Peter Eisentraut Sernanders väg 10:115
table owner in order to vacuum a table. This is mainly to prevent
denial-of-service attacks via repeated vacuums. Allow VACUUM to gather
statistics about system relations, except for pg_statistic itself ---
not clear that it's worth the trouble to make that case work cleanly.
Cope with possible tuple size overflow in pg_statistic tuples; I'm
surprised we never realized that could happen. Hold a couple of locks
a little longer to try to prevent deadlocks between concurrent VACUUMs.
There still seem to be some problems in that last area though :-(
parallel --- and, not incidentally, removing a common reason for needing
manual cleanup by the DB admin after a crash. Remove initial global
delete of pg_statistics rows in VACUUM ANALYZE; this was not only bad
for performance of other backends that had to run without stats for a
while, but it was fundamentally broken because it was done outside any
transaction. Surprising we didn't see more consequences of that.
Detect attempt to run VACUUM inside a transaction block. Check for
query cancel request before starting vacuum of each table. Clean up
vacuum's private portal storage if vacuum is aborted.
By dropping stats rows here, we eliminate the need for VACUUM to do a
wholesale remove of stats rows. Before, pg_statistics was wiped clean
at the start of VACUUM, ensuring poor planning results for any backends
running in parallel until VACUUM got around to rebuilding the stats for
the relations they are accessing.
Make all system indexes unique.
Make all cache loads use system indexes.
Rename *rel to *relid in inheritance tables.
Rename cache names to be clearer.
for the case of errors in backend startup, and proc_exit's method for
coping with errors during proc_exit was *completely* busted. Fixed per
discussions on pghackers around 11/6/99.
it wants to release. This leads to a race condition: does the backend
that's trying to flush the buffer do so before the one that's deleting the
relation does so? Usually no problem, I expect, but on occasion this could
lead to hard-to-reproduce complaints from md.c, especially mdblindwrt.
returns a list of RelOptInfos, eliminating the need for static state
in index_info. That static state was a direct cause of coredumps; if
anything decided to elog(ERROR) partway through an index_info search of
pg_index, the next query would try to close a scan pointer that was
pointing at no-longer-valid memory. Another example of the reasons to
avoid static state variables...
of the index it wants to destroy. This ensures that no other backend is
actively scanning or updating that index. Getting exclusive access on
the index alone is NOT sufficient, because the executor is rather
cavalier about getting locks on indexes --- see ExecOpenIndices().
It might be better to grab index locks in the executor, but I'm not
sure the extra lockmanager traffic is really worth it just to make
index_destroy cleaner.
(whoever thought world-writable files were a good default????). Modify
the pg_pwd code so that pg_pwd is created with 600 permissions. Modify
initdb so that permissions on a pre-existing PGDATA directory are not
blindly accepted: if the dir is already there, it does chmod go-rwx
to be sure that the permissions are OK and the dir actually is owned
by postgres.
inval.c thought it could safely use the catcache to look up the OIDs of
system relations. Not good, considering that inval.c could be called
during catcache loading, if a shared-inval message arrives. Rip out the
lookup logic and instead use the known OIDs from pg_class.h.
table defaults or rules: translate them to a function call so that
parse_coerce doesn't reduce them to a date or time constant immediately.
Also, eliminate a lot of redundancy in the expression grammar by
defining a new nonterminal com_expr, which contains all the productions
that can be shared by a_expr and b_expr.
Warn_restart has been set by the backend main loop. This means that
elog(ERROR) or elog(FATAL) in the postmaster or during backend startup
now have well-defined behavior: proc_exit() rather than coredump.
In the case of elog() inside the postmaster, I think that proc_exit()
is probably not enough --- don't we want our child backends to be
forced to quit too? But I don't understand Vadim's recent changes in
this area, so I'll leave it to him to look over and tweak if needed.
subselects can only appear on the righthand side of a binary operator.
That's still true for quantified predicates like x = ANY (SELECT ...),
but a subselect that delivers a single result can now appear anywhere
in an expression. This is implemented by changing EXPR_SUBLINK sublinks
to represent just the (SELECT ...) expression, without any 'left hand
side' or combining operator --- so they're now more like EXISTS_SUBLINK.
To handle the case of '(x, y, z) = (SELECT ...)', I added a new sublink
type MULTIEXPR_SUBLINK, which acts just like EXPR_SUBLINK used to.
But the grammar will only generate one for a multiple-left-hand-side
row expression.
nulls with non-nulls using proper three-valued boolean logic. Also clean
up ExecQual to make it clearer that ExecQual *does* follow the SQL spec
for boolean nulls. See '[BUGS] (null) != (null)' thread around 10/26/99
for more detail.
Now indexes of pg_class and pg_type are unique indexes
and guarantee the uniqueness of correponding attributes.
heap_create() was changed to take another boolean parameter
which allows to postpone the creation of disk file.
The name of rd_nonameunlinked was changed to rd_unlinked.
It is used generally(not only for noname relations) now.
Requires initdb.
Apparently, back in the dim reaches of prehistory, the parser couldn't
be trusted to label Const nodes with the correct constbyval value ...
and someone preferred to patch around this in copyObject rather than
fix the problem at the source. The problem is long gone, but the hack
lingered on. Until now.
in the TupleDesc that the caller already has (for call from ExecMain) or
can make just as easily as ExecInitJunkFilter() can (for call from
ExecAppend). Also, don't bother to build a junk filter for an INSERT
operation that doesn't actually need one, which is the normal case.
In particular, don't bother to look up type information for attributes
where we're not actually going to use it, and avoid copying entire tlist
structure when it's not necessary.
during initial run formation by keeping both current run and next-run
tuples in the same heap (yup, Knuth is smarter than I am). And, during
merge passes, make use of available sort memory to load multiple tuples
from any one input 'tape' at a time, thereby improving locality of
access to the temp file.
before calling execProject, when the outerPlan has returned zero tuples.
I took this out under the mistaken impression that the input tuple
couldn't be referenced by execProject if we weren't in GROUP BY mode.
But it can, if we're in an UPDATE or DELETE...
The following patch extends the COMMENT ON functionality to the
rest of the database objects beyond just tables, columns, and views. The
grammer of the COMMENT ON statement now looks like:
COMMENT ON [
[ DATABASE | INDEX | RULE | SEQUENCE | TABLE | TYPE | VIEW ] <objname>
|
COLUMN <relation>.<attribute> |
AGGREGATE <aggname> <aggtype> |
FUNCTION <funcname> (arg1, arg2, ...) |
OPERATOR <op> (leftoperand_typ rightoperand_typ) |
TRIGGER <triggername> ON relname>
Mike Mascari
(mascarim@yahoo.com)
eliminating some wildly inconsistent coding in various parts of the
system. I set MAXPGPATH = 1024 in config.h.in. If anyone is really
convinced that there ought to be a configure-time test to set the
value, go right ahead ... but I think it's a waste of time.
when an initdb-forcing change has been applied within a development cycle.
PG_VERSION serves this purpose for official releases, but we can't bump
the PG_VERSION number every time we make a change to the catalogs during
development. Instead, increase the catalog version number to warn other
developers that you've made an incompatible change. See my mail to
pghackers for more info.
This patch fix a TODO list item.
* require SELECT DISTINCT target list to have all ORDER BY columns
example
ogawa=> select distinct x from t1 order by y;
ERROR: ORDER BY columns must appear in SELECT DISTINCT target list
---
Atsushi Ogawa
boundary-condition bug in myinput() which caused flex scanner to fail
on tokens larger than a bufferload. Turns out flex doesn't want null-
terminated input ... and if it gives you a 1-character buffer, you'd
better supply a character, not a null, lest you be thought to be
reporting end of input.
proc_exit time. I discovered that if the frontend closes the connection
when you're inside a transaction block, there is nothing ensuring that
temp files go away ... I wonder whether proc_exit ought to try to do an
explicit transaction abort?
a generalized module 'tuplesort.c' that can sort either HeapTuples or
IndexTuples, and is not tied to execution of a Sort node. Clean up
memory leakages in sorting, and replace nbtsort.c's private implementation
of mergesorting with calls to tuplesort.c.
recycle storage within sort temp file on a block-by-block basis. This
reduces peak disk usage to essentially just the volume of data being
sorted, whereas it had been about 4x the data volume before.
>From the ORACLE 7 SQL Language Reference Manual:
-----------------------------------------------------
COMMENT
Purpose:
To add a comment about a table, view, snapshot, or
column into the data dictionary.
Prerequisites:
The table, view, or snapshot must be in your own
schema
or you must have COMMENT ANY TABLE system privilege.
Syntax:
COMMENT ON [ TABLE table ] |
[ COLUMN table.column] IS 'text'
You can effectively drop a comment from the database
by setting it to the empty string ''.
-----------------------------------------------------
Example:
COMMENT ON TABLE workorders IS
'Maintains base records for workorder information';
COMMENT ON COLUMN workorders.hours IS
'Number of hours the engineer worked on the task';
to drop a comment:
COMMENT ON COLUMN workorders.hours IS '';
The current patch will simply perform the insert into
pg_description, as per the TODO. And, of course, when
the table is dropped, any comments relating to it
or any of its attributes are also dropped. I haven't
looked at the ODBC source yet, but I do know from
an ODBC client standpoint that the standard does
support the notion of table and column comments.
Hopefully the ODBC driver is already fetching these
values from pg_description, but if not, it should be
trivial.
Hope this makes the grade,
Mike Mascari
(mascarim@yahoo.com)
BufFile so that it handles multi-segment temporary files transparently.
This allows sorts and hashes to work with data exceeding 2Gig (or whatever
the local limit on file size is). Change psort.c to use relative seeks
instead of absolute seeks for backwards scanning, so that it won't fail
when the data volume exceeds 2Gig.
Cygwin snapshots (tested on 990115 which is recommended to use - it fixes
some errors in B20.1)
And I have another patch for including <sys/ipc.h> before <sys/sem.h> in
backend/storage/lmgr/proc.c - it is required due the design of cygipc
headers
Dan
mentioned in FROM but not elsewhere in the query: such tables should be
joined over anyway. Aside from being more standards-compliant, this allows
removal of some very ugly hacks for COUNT(*) processing. Also, allow
HAVING clause without aggregate functions, since SQL does. Clean up
CREATE RULE statement-list syntax the same way Bruce just fixed the
main stmtmulti production.
CAUTION: addition of a field to RangeTblEntry nodes breaks stored rules;
you will have to initdb if you have any rules.
quite the same way that transformInsertStatement does, so that an expression
could be accepted by CREATE TABLE and then fail when used. Also, put back
check that CONSTRAINT expressions must yield boolean...
expressions in CREATE TABLE. There is no longer an emasculated expression
syntax for these things; it's full a_expr for constraints, and b_expr
for defaults (unfortunately the fact that NOT NULL is a part of the
column constraint syntax causes a shift/reduce conflict if you try a_expr.
Oh well --- at least parenthesized boolean expressions work now). Also,
stored expression for a column default is not pre-coerced to the column
type; we rely on transformInsertStatement to do that when the default is
actually used. This means "f1 datetime default 'now'" behaves the way
people usually expect it to.
BTW, all the support code is now there to implement ALTER TABLE ADD
CONSTRAINT and ALTER TABLE ADD COLUMN with a default value. I didn't
actually teach ALTER TABLE to call it, but it wouldn't be much work.
not just C, so that ISCACHABLE attribute can be specified for user-defined
functions. Get rid of ParamString node type, which wasn't actually being
generated by gram.y anymore, even though define.c thought that was what
it was getting. Clean up minor bug in dfmgr.c (premature heap_close).
modifyAggrefQual. This routine really, really needs to be retired, but
until we have subselects in FROM there's no chance of doing the job right.
In the meantime try to respond to unhandlable cases with elog rather than
coredump.
in the Expr nodes they produce. This fixes a few cases of errors like
'typeidTypeRelid: Invalid type - oid = 0' caused by calling parser-related
routines on expression trees that have already been processed by planner-
related routines.
they have no hardwired limit on the length of a rule's text. Fix a couple
of minor bugs in passing --- deparsed UPDATE queries didn't have quotes
around relation name, and quotes and backslashes in constant values weren't
backslash-quoted.
expression_tree_mutator rather than ad-hoc tree walking code. This shortens
the code materially and fixes a fair number of sins of omission. Also,
change modifyAggrefQual to *not* recurse into subselects, since its mission
is satisfied if it removes aggregate functions from the top level of a
WHERE clause. This cures problems with queries of the form SELECT ...
WHERE x IN (SELECT ... HAVING something-using-an-aggregate), which would
formerly get mucked up by modifyAggrefQual. The routine is still
fundamentally broken, of course, but I don't think there's any way to get
rid of it before we implement subselects in FROM ...
