pgsql-hackers. pg_opclass now has a row for each opclass supported by each
index AM, not a row for each opclass name. This allows pg_opclass to show
directly whether an AM supports an opclass, and furthermore makes it possible
to store additional information about an opclass that might be AM-dependent.
pg_opclass and pg_amop now store "lossy" and "haskeytype" information that we
previously expected the user to remember to provide in CREATE INDEX commands.
Lossiness is no longer an index-level property, but is associated with the
use of a particular operator in a particular index opclass.
Along the way, IndexSupportInitialize now uses the syscaches to retrieve
pg_amop and pg_amproc entries. I find this reduces backend launch time by
about ten percent, at the cost of a couple more special cases in catcache.c's
IndexScanOK.
Initial work by Oleg Bartunov and Teodor Sigaev, further hacking by Tom Lane.
initdb forced.
* remove support for encode() as it is in main tree now
* remove krb5.c
* new 'PX library' architecture
* remove BSD license from my code to let the general
PostgreSQL one to apply
* md5, sha1: ANSIfy, use const where appropriate
* various other formatting and clarity changes
* hmac()
* UN*X-like crypt() - system or internal crypt
* Internal crypt: DES, Extended DES, MD5, Blowfish
crypt-des.c, crypt-md5.c from FreeBSD
crypt-blowfish.c from Solar Designer
* gen_salt() for crypt() - Blowfish, MD5, DES, Extended DES
* encrypt(), decrypt(), encrypt_iv(), decrypt_iv()
* Cipher support in mhash.c, openssl.c
* internal: Blowfish, Rijndael-128 ciphers
* blf.[ch], rijndael.[ch] from OpenBSD
* there will be generated file rijndael-tbl.inc.
Marko Kreen
parser interface code. It now uses libxml2 instead of expat (though I've
left the old code in the tarball). This means *proper* XPath support, and
the provided function allows you to wrap your result set in XML tags to
produce a new XML document.
John Gray
has an alias SERIAL4 and a sister SERIAL8. SERIAL8 is just the same
except the created column is type int8 not int4.
initdb forced. Note this also breaks any chance of pg_upgrade from 7.1,
unless we hack up pg_upgrade to drop and recreate sequences. (Which is
not out of the question, but I don't wanna do it.)
default, but OIDS are removed from many system catalogs that don't need them.
Some interesting side effects: TOAST pointers are 20 bytes not 32 now;
pg_description has a three-column key instead of one.
Bugs fixed in passing: BINARY cursors work again; pg_class.relhaspkey
has some usefulness; pg_dump dumps comments on indexes, rules, and
triggers in a valid order.
initdb forced.
(as proposed in http://fts.postgresql.org/db/mw/msg.html?mid=1028327)
2. support for 'pass-by-value' arguments - to test this
we used special opclass for int4 with values in range [0-2^15]
More testing will be done after resolving problem with
index_formtuple and implementation of B-tree using GiST
3. small patch to contrib modules (seg,cube,rtree_gist,intarray) -
mark functions as 'isstrict' where needed.
Oleg Bartunov
be able to apply against what you just committed. It rolls soundex into
fuzzystrmatch.
Remove soundex/metaphone and merge into fuzzystrmatch.
Joe Conway
metaphone() in a contrib. There seem to be a fair number of different
approaches to both of these algorithms. I used the simplest case for
levenshtein which has a cost of 1 for any character insertion, deletion, or
substitution. For metaphone, I adapted the same code from CPAN that the PHP
folks did.
A couple of questions:
1. Does it make sense to fold the soundex contrib together with this one?
2. I was debating trying to add multibyte support to levenshtein (it would
make no sense at all for metaphone), but a quick search through the contrib
directory found no hits on the word MULTIBYTE. Should worry about adding
multibyte support to levenshtein()?
Joe Conway
* The ability to index more than one column in a table with a single
trigger.
* All uses of sprintf changed to snprintf to prevent users from crashing
Postgres.
* Error messages made more consistent
* Some changes made to bring it into line with coding requirements for
triggers specified in the docs. (ie. check you're a trigger before casting
your context)
* The perl script that generate indices has been updated to support indexing
multiple columns in a table.
* Fairly well tested in our development environment indexing a food
database's brand and description fields. The size of the fti index is
around 300,000 rows.
* All docs and examples upgraded. This includes specifying more efficient
index usage that was specified before, better examples that don't produce
duplicates, etc.
Christopher Kings-Lynne & Brett
! #define ARRISNULL(x) ( (x) ? ( ( ARR_NDIM(x) == NDIM ) ? ( ( ARRNELEMS( x ) )
? 0 : 1 ) : ( ( ARR_NDIM(x) ) ? (elog(ERROR,"Array is not one-dimentional: %d di
mentions", ARR_NDIM(x)),1) : 1 ) ) : 1 )
Should be "one-dimensional" and "dimensions". Bruce, would you fix that
when you apply it?
Tom
substrings of two characters or greater, and is case-sensitive.
This patch makes it work correctly. It generates only the suffixes of each
word, plus lowercases them - as specified by the README file.
This brings it into line with the fti.c function, makes it case-insensitive
properly, removes the problem with duplicate rows being returned from an fti
search and greatly reduces the size of the generated index table.
It was written by my co-worker, Brett Toolin.
Christopher Kings-Lynne
rather than deleting them only to have to create more. Steady state
is 2*CHECKPOINT_SEGMENTS + WAL_FILES + 1 segment files, which will
simply be renamed rather than constantly deleted and recreated.
To make this safe, added current XLOG file/offset number to page
header of XLOG pages, so that an un-overwritten page from an old
incarnation of a logfile can be reliably told from a valid page.
This change means that if you try to restart postmaster in a CVS-tip
database after installing the change, you'll get a complaint about
bad XLOG page magic number. If you don't want to initdb, run
contrib/pg_resetxlog (and be sure you shut down the old postmaster
cleanly).
redirections between the build files, which didn't work completely. Now
you just go to the directory of your choice and run make. Clean up the
build files to have a logical order, fix the unnecessary rebuilds, prevent
the deleting targets from removing files they're not responsible for. Ant
1.3 does not have a bug. It deletes directories just fine if you follow
the documentation.
Oracle database to PostgreSQL.
It currently dump the database schema (tables, views, sequences,
indexes, grants), with primary, unique and foreign keys into PostgreSQL
syntax without editing the SQL code generated. You can dump only a
particular schema from the Oracle database.
Functions, procedures and triggers with SQL or PLSQL code generated must
be reviewed to match the PostgreSQL syntax. Some usefull recommandation
on porting Oracle to PostgreSQL can be found at
http://techdocs.postgresql.org/
under the "Converting from other Databases to PostgreSQL" Oracle part. I
just
notice one thing more is that the trunc() function in Oracle is the same for
number
or date so be carefull when porting to PostgreSQL to use trunc() for number
and
date_trunc() for date.
I will add more precision in type NUMBER conversion based on length to match
as closest as possible all rich PostgreSQL numerics type. But it seems not to be
urgent as it seems that Oracle DBAs only create number with length 22 (default)
Space seems not to be their problem...
Gilles DAROLD
around. I tested this patch under Cygwin and Linux.
Note that I only changed dblink's Makefile in the most minimal way
to fix the link problem under Cygwin (i.e., use the link rule from
Makefile.shlib instead). dblink's Makefile should probably be further
patched to be consistent with the other PostgreSQL Makefiles.
Jason Tishler
Cygwin with the possible exception of mSQL-interface. Since I don't
have mSQL installed, I skipped this tool.
Except for dealing with a missing getopt.h (oid2name) and HUGE (seg),
the bulk of the patch uses the standard PostgreSQL approach to deal with
Windows DLL issues.
I tested the build aspect of this patch under Cygwin and Linux without
any ill affects. Note that I did not actually attempt to test the code
for functionality.
The procedure to apply the patch is as follows:
$ # save the attachment as /tmp/contrib.patch
$ # change directory to the top of the PostgreSQL source tree
$ patch -p0 </tmp/contrib.patch
Jason
checkpoint's redo pointer, not its undo pointer, per discussion in
pghackers a few days ago. No point in hanging onto undo information
until we have the ability to do something with it --- and this solves
a rather large problem with log space for long-running transactions.
Also, change all calls of write() to detect the case where write
returned a count less than requested, but failed to set errno.
Presume that this situation indicates ENOSPC, and give the appropriate
error message, rather than a random message associated with the previous
value of errno.
in c.h we should be using the visible structure. We should only see
de-TOASTed values in this program. The old method refused to compile
because the length macro was no longer an lvalue.
> Postgres 7.1.0), and I think I've found a bug.
>
> I compiled Pgcrypto with OpenSSL, using gcc 2.95.4 and
> OpenSSL 0.9.6a (the latest Debian 'unstable' packages).
> web=> select encode(digest('blah', 'sha1'), 'base64');
> FATAL 1: pg_encode: overflow, encode estimate too small
> pqReadData() -- backend closed the channel unexpectedly.
> This probably means the backend terminated abnormally
> before or while processing the request.
> The connection to the server was lost. Attempting reset: Succeeded.
> Is this a bug? Can it be fixed?
This is a bug alright. And a silly one :)
Marko Kreen
a PostgreSQL user-defined function. The Metaphone system is a method of
matching similar sounding names (or any words) to the same code.
Metaphone was invented by Lawrence Philips as an improvement to the popular
name-hashing routine, Soundex.
This metaphone code is from Michael Kuhn, and is detailed at
http://aspell.sourceforge.net/metaphone/metaphone-kuhn.txt
Joel Burton
because we need page LSNs stored in the main database to be less than
the current XLOG position. Hence, generate the new XLOG segment at last
old segment number plus one.
(said redirection required when run).
After checking using cvsweb, removed the offending conflict.
Rebuilt configure using autoconf, and it now works fine.
version number from the current database, and couldn't find any existing
program to do that.
linda:~$ pg_controldata
Log file id: 0
Log file segment: 5
Last modified: Wed Feb 7 19:35:47 2001
Database block size: 8192
Blocks per segment of large relation: 131072
Catalog version number: 200101061
LC_COLLATE: en_GB
LC_CTYPE: en_GB
Log archive directory:
Oliver Elphick Oliver.Elphick@lfix.co.uk
* reverse the change #include <> -> "" in krb.c.
It _must not_ include files in "."
* Makefile update. Inconsistent var usage and SHLIB was
not set.
Now it should work with all external libs.
arko Kreen
> OK, add #include <stdio.h> to the file. That should fix it.
Seems unlikely, since libpq-fe.h already includes <stdio.h>.
The real problem here is that the code is wrong: it's passing NULL
to an int parameter.
regards, tom lane
are now separate files "postgres.h" and "postgres_fe.h", which are meant
to be the primary include files for backend .c files and frontend .c files
respectively. By default, only include files meant for frontend use are
installed into the installation include directory. There is a new make
target 'make install-all-headers' that adds the whole content of the
src/include tree to the installed fileset, for use by people who want to
develop server-side code without keeping the complete source tree on hand.
Cleaned up a whole lot of crufty and inconsistent header inclusions.
timing, I know :)) At the moment the digest() function returns
hexadecimal coded hash, but I want it to return pure binary. I
have also included functions encode() and decode() which support
'base64' and 'hex' encodings, so if anyone needs digest() in hex
he can do encode(digest(...), 'hex').
Main reason for it is "to do one thing and do it well" :)
Another reason is if someone needs really lot of digesting, in
the end he wants to store the binary not the hexadecimal result.
It is really silly to convert it to hex then back to binary
again. As I said if someone needs hex he can get it.
Well, and the real reason that I am doing encrypt()/decrypt()
functions and _they_ return binary. For testing I like to see
it in hex occasionally, but it is really wrong to let them
return hex. Only now it caught my eye that hex-coding in
digest() is wrong. When doing digest() I thought about 'common
case' but hacking with psql is probably _not_ the common case :)
Marko Kreen
- These methods in org.postgresql.jdbc2.ResultSet are now implemented:
getBigDecimal(int) ie: without a scale (why did this get missed?)
getBlob(int)
getCharacterStream(int)
getConcurrency()
getDate(int,Calendar)
getFetchDirection()
getFetchSize()
getTime(int,Calendar)
getTimestamp(int,Calendar)
getType()
NB: Where int represents the column name, the associated version
taking a String were already implemented by calling the int
version.
- These methods no longer throw the not implemented but the new noupdate
error. This is in preparation for the Updateable ResultSet support
which will overide these methods by extending the existing class to
implement that functionality, but needed to show something other than
notimplemented:
cancelRowUpdates()
deleteRow()
- Added new error message into errors.properties "postgresql.noupdate"
This is used by jdbc2.ResultSet when an update method is called and
the ResultSet is not updateable. A new method notUpdateable() has been
added to that class to throw this exception, keeping the binary size
down.
- Added new error message into errors.properties "postgresql.psqlnotimp"
This is used instead of unimplemented when it's a feature in the
backend that is preventing this method from being implemented.
- Removed getKeysetSize() as its not part of the ResultSet API
Thu Jan 18 09:46:00 GMT 2001 peter@retep.org.uk
- Applied modified patch from Richard Bullington-McGuire
<rbulling@microstate.com>. I had to modify it as some of the code
patched now exists in different classes, and some of it actually
patched obsolete code.
Wed Jan 17 10:19:00 GMT 2001 peter@retep.org.uk
- Updated Implementation to include both ANT & JBuilder
- Updated README to reflect the changes since 7.0
- Created jdbc.jpr file which allows JBuilder to be used to edit the
source. JBuilder _CAN_NOT_ be used to compile. You must use ANT for
that. It's only to allow JBuilders syntax checking to improve the
drivers source. Refer to Implementation for more details
entry:
----------------------------
revision 1.2
date: 2000/12/04 01:20:38; author: tgl; state: Exp; lines:
+18 -18
Eliminate some of the more blatant platform-dependencies ... it
builds here now, anyway ...
----------------------------
Which basically changes u_int*_t -> uint*_t, so now it does not
compile neither under Debian 2.2 nor under NetBSD 1.5 which
is platform independent<B8> all right. Also it replaces $KAME$
with $Id$ which is Bad Thing. PostgreSQL Id should be added as a
separate line so the file history could be seen.
So here is patch:
* changes uint*_t -> uint*. I guess that was the original
intention
* adds uint64 type to include/c.h because its needed
[somebody should check if I did it right]
* adds back KAME Id, because KAME is the master repository
* removes stupid c++ comments in pgcrypto.c
* removes <sys/types.h> from the code, its not needed
--
marko
Marko Kreen
1. Distinguish cases where a Datum representing a tuple datatype is an OID
from cases where it is a pointer to TupleTableSlot, and make sure we use
the right typlen in each case.
2. Make fetchatt() and related code support 8-byte by-value datatypes on
machines where Datum is 8 bytes. Centralize knowledge of the available
by-value datatype sizes in two macros in tupmacs.h, so that this will be
easier if we ever have to do it again.
level" locks. A session lock is not released at transaction commit (but it
is released on transaction abort, to ensure recovery after an elog(ERROR)).
In VACUUM, use a session lock to protect the master table while vacuuming a
TOAST table, so that the TOAST table can be done in an independent
transaction.
I also took this opportunity to do some cleanup and renaming in the lock
code. The previously noted bug in ProcLockWakeup, that it couldn't wake up
any waiters beyond the first non-wakeable waiter, is now fixed. Also found
a previously unknown bug of the same kind (failure to scan all members of
a lock queue in some cases) in DeadLockCheck. This might have led to failure
to detect a deadlock condition, resulting in indefinite waits, but it's
difficult to characterize the conditions required to trigger a failure.
$(CC) $(CFLAGS) $(LDFLAGS) <object files> <extra-libraries> $(LIBS) -o $@
This form seemed to be the most portable, readable, and logical, but in any
case it's better than having a dozen different ones in the tree.
in pghackers list. Support for oldstyle internal functions is gone
(no longer needed, since conversion is complete) and pg_language entry
'internal' now implies newstyle call convention. pg_language entry
'newC' is gone; both old and newstyle dynamically loaded C functions
are now called language 'C'. A newstyle function must be identified
by an associated info routine. See src/backend/utils/fmgr/README.
maintained for each cache entry. A cache entry will not be freed until
the matching ReleaseSysCache call has been executed. This eliminates
worries about cache entries getting dropped while still in use. See
my posting to pg-hackers of even date for more info.
kibitzing from Tom Lane. Large objects are now all stored in a single
system relation "pg_largeobject" --- no more xinv or xinx files, no more
relkind 'l'. This should offer substantial performance improvement for
large numbers of LOs, since there won't be directory bloat anymore.
It'll also fix problems like running out of locktable space when you
access thousands of LOs in one transaction.
Also clean up cruft in read/write routines. LOs with "holes" in them
(never-written byte ranges) now work just like Unix files with holes do:
a hole reads as zeroes but doesn't occupy storage space.
INITDB forced!
source directory. This involves mostly makefiles using $(srcdir) when they
might have used ".". (Regression tests don't work with this, yet.)
Sort out usage of CPPFLAGS, CFLAGS (and CXXFLAGS). Add "override" keyword
in most places, to preserve necessary flags even when the user overrode the
flags.
Remove a bunch of crufty code for large-object-based arrays, which is
superseded by TOAST and likely hasn't worked in a long time anyway.
Clean up array code a little, and in particular eliminate its habit
of scribbling on the input array (ie, modifying the input tuple :-().
* the result is not recorded anywhere
* the result is not used anywhere
* the result is only used in some places, whereas others have been getting away with it
* the result is used improperly
Also make command line options handling a little better (e.g., --disable-locale,
while redundant, should really still *dis*able).
* Add option to build with OpenSSL out of the box. Fix thusly exposed
bit rot. Although it compiles now, getting this to do something
useful is left as an exercise.
* Fix Kerberos options to defer checking for required libraries until
all the other libraries are checked for.
* Change default odbcinst.ini and krb5.srvtab path to PREFIX/etc.
* Install work around for Autoconf's install-sh relative path anomaly.
Get rid of old INSTL_*_OPTS variables, now that we don't need them
anymore.
* Use `gunzip -c' instead of g?zcat. Reportedly broke on AIX.
* Look for only one of readline.h or readline/readline.h, not both.
* Make check for PS_STRINGS cacheable. Don't test for the header files
separately.
* Disable fcntl(F_SETLK) test on Linux.
* Substitute the standard GCC warnings set into CFLAGS in configure,
don't add it on in Makefile.global.
* Sweep through contrib tree to teach makefiles standard semantics.
... and in completely unrelated news:
* Make postmaster.opts arbitrary options-aware. I still think we need to
save the environment as well.
Does not work since it fetches one byte beyond the source data, and when
the phase of the moon is wrong, the source data is smack up against the
end of backend memory and you get SIGSEGV. Don't laugh, this is a fix
for an actual user bug report.
And:
Note, Bruce I found in the contrib tree any files that we forget
remove during contrib cleaning. Please remove these files:
contrib/lo/test.sql
contrib/pg_dumplo/Makefile.out
contrib/pgbench/pgbench_jis.doc
contrib/spi/new_example.example
contrib/spi/README.MAX
Thanks.
Karel
prepared for dirtribution (it needs a little changes). I can change and work
on this, but I need motivation :-)
And Peter, I know and I agree that standard PG tree is not good space for
all interfaces and for all tools based on PG, but LO is PG feature and we
haven't backup tool for LO.
Karel Zak
quote-stripping, and acl-checking tasks for these functions from the
parser, and do them at function execution time instead. This fixes
the failure of pg_dump to produce correct output for nextval(Foo)
used in a rule, and also eliminates the restriction that the argument
of these functions must be a parse-time constant.
here is an updated version of the bit type with a bugfix and all the necessa
ry
SQL functions defined. This should replace what is currently in contrib. I'd
appreciate any comments on what is there.
Kind regards,
Adriaan
Makefiles now), there's no reason for os2client to maintain its own
copy of c.h just to change #define PORTNAME. Simplify Makefile
accordingly. Get rid of horribly-out-of-date modified copy of c.h,
which should never have been in the distribution to start with,
since it's actually a derived file. Now it's not needed anyway.
this is an old patch which I have already submitted and never seen
in the sources. It corrects the datatype oids used in some iterator
functions. This bug has been reported to me by many other people.
contrib-datetime.patch
some code contributed by Reiner Dassing <dassing@wettzell.ifag.de>
contrib-makefiles.patch
fixes all my contrib makefiles which don't work with some compilers,
as reported to me by another user.
contrib-miscutil.patch
an old patch for one of my old contribs.
contrib-string.patch
a small change to the c-like text output functions. Now the '{'
is escaped only at the beginning of the string to distinguish it
from arrays, and the '}' is no more escaped.
elog-lineno.patch
adds the current lineno of CopyFrom to elog messages. This is very
useful when you load a 1 million tuples table from an external file
and there is a bad value somehere. Currently you get an error message
but you can't know where is the bad data. The patch uses a variable
which was declared static in copy.c. The variable is now exported
and initialized to 0. It is always cleared at the end of the copy
or at the first elog message or when the copy is canceled.
I know this is very ugly but I can't find any better way of knowing
where the copy fails and I have this problem quite often.
plperl-makefile.patch
fixes a typo in a makefile, but the error must be elsewhere because
it is a file generated automatically. Please have a look.
tprintf-timestamp.patch
restores the original 2-digit year format, assuming that the two
century digits don't carry much information and that '000202' is
easier to read than 20000202. Being only a log file it shouldn't
break anything.
Please apply the patches before the next scheduled code freeze.
I also noticed that some of the contribs don't compile correcly. Should we
ask people to fix their code or rename their makefiles so that they are
ignored by the top makefile?
--
Massimo Dal Zotto
family functions. Contain:
conversion from a datetype to formatted text:
to_char( datetime, text)
to_char( timestamp, text)
to_char( int4, text)
to_char( int8, text)
to_char( float4, text)
to_char( float8, text)
to_char( numeric, text)
vice versa:
to_date ( text, text)
to_datetime ( text, text)
to_timestamp ( text, text)
to_number ( text, text) (convert to numeric)
PostgreSQL to_char is very compatible with Oracle's to_char(), but not
total exactly (now). Small differentions are in number formating. It will
fix in next to_char() version.
! If will this patch aplly to the main tree, must be delete the current
to_char version in contrib (directory "dateformat" and note in contrib's
README), this patch not erase it (sorry Bruce).
The patch patching files:
doc/src/sgml/func.sgml
^^^^^^^^
Hmm, I'm not sure if my English... :( Check it anyone (volunteer)?
Thomas, it is right? SGML is not my primary lang and compile
the current PG docs tree is very happy job (hard variables setting in
docs/sgml/Makefile --> HSTYLE= /home/users/t/thomas/.... :-)
What add any definition to global configure.in and set Makefiles in docs
tree via ./configure?
src/backend/utils/adt/Makefile
src/backend/utils/adt/formatting.c
src/include/catalog/pg_proc.h
src/include/utils/formatting.h
Karel Zak <zakkr@zf.jcu.cz> http://home.zf.jcu.cz/~zakkr/
TO_DATE()
and PgSQL extension FROM_CHAR().
TO_CHAR() routine allow formating text output with a datetime values:
SELECT TO_CHAR('now'::datetime, '"Now is: "HH24:MI:SS');
to_char
----------------
Now is: 21:04:10
FROM_CHAR() routine allow convert text to a datetime:
SELECT FROM_CHAR('September 1999 10:20:30', 'FMMonth YYYY
HH:MI:SS');
from_char
-----------------------------
Wed Sep 01 10:20:30 1999 CEST
TO_DATE() is equal with FROM_CHAR(), but output a Date only:
SELECT TO_DATE('September 1999 10:20:30', 'FMMonth YYYY
HH:MI:SS');
to_date
----------
09-01-1999
In attache is compressed dir for the contrib. All is prepared, but I'am
not
sure if Makefile is good (probably yes).
Comments & suggestions ?
Thomas, thank you for your good advices.
Karel
------------------------------------------------------------------------------
Karel Zak <zakkr@zf.jcu.cz>
http://home.zf.jcu.cz/~zakkr/
additional argument specifying the kind of lock to acquire/release (or
'NoLock' to do no lock processing). Ensure that all relations are locked
with some appropriate lock level before being examined --- this ensures
that relevant shared-inval messages have been processed and should prevent
problems caused by concurrent VACUUM. Fix several bugs having to do with
mismatched increment/decrement of relation ref count and mismatched
heap_open/close (which amounts to the same thing). A bogus ref count on
a relation doesn't matter much *unless* a SI Inval message happens to
arrive at the wrong time, which is probably why we got away with this
sloppiness for so long. Repair missing grab of AccessExclusiveLock in
DROP TABLE, ALTER/RENAME TABLE, etc, as noted by Hiroshi.
Recommend 'make clean all' after pulling this update; I modified the
Relation struct layout slightly.
Will post further discussion to pghackers list shortly.
I have updated my contrib code for version 6.5. In the attachment you will
find the directories array, datetime, miscutil, string, tools and userlocks
which replace the corresponding directories under contrib.
In contrib/tools you will find some developement scripts which I use while
hacking the sources. I hope they will be useful for some other people.
I have also added a contrib/Makefile which tries to compile and install all
the contribs. Unfortunately many of them don't have a Makefile or don't
compile cleanly.
--
Massimo Dal Zotto
{
Oid relId;
Oid dbId;
union
{
BlockNumber blkno;
TransactionId xid;
} objId;
>
> Added:
> /*
> * offnum should be part of objId.tupleId above, but would increase
> * sizeof(LOCKTAG) and so moved here; currently used by userlocks only.
> */
> OffsetNumber offnum;
uint16 lockmethod; /* needed by userlocks */
} LOCKTAG;
gmake clean required...
User locks are ready for 6.5 release...
The
offending code
has been removed, the action is now always dependent :-)
I suggest the following patch, to finally make trigger regression happy
again:
<<refint1.patch>>
After that you can remove the following from TODO:
Remove ERROR: check_primary_key: even number of arguments should be
specified
Trigger regression test fails
Andreas
works with a new policy in cascade mode .
Please Read README.MAX .
I do not know if you are the author of refint.c ,
but if not please tell me who is .
Thank you ( excuse me for my bad english) .
Massimo Lambertini massimo.lambertini@everex.it
to postgres.init.sh , clairify the options
available, and to add easy support
for installation of postgres into the
runlevel system.
"sh postgres.init.sh install"
Will now install "postgres" in the
/etc/rc.d/init.d directory and execute
/sbin/chkconfig to hook up the symbolic
links. An uninstall option is also added.
Enclosed is the patch and the patched file
Clark
I've changed the check_primary_key() function code to allow for either
the "automatic insert key rule" or "dependent insert key rule".
Previously it restricted the addtion of a child entry if the
corresponding parent entry was not there. Now if the option is
"automatic" it will add an entry in the parent too ( it will be
successful if there are no no-null fields in the parent apart from the
primary key).
The way to use it now is:
:/*
* check_primary_key () -- check that key in tuple being
inserted/updated
* references existing tuple in "primary" table.
* Though it's called without args You have to specify referenced
* table/keys while creating trigger: key field names in triggered
table,
* referenced table name, referenced key field names,type of action
[automatic|dependent]:
* EXECUTE PROCEDURE
* check_primary_key ('Fkey1', 'Fkey2', 'Ptable', 'Pkey1', 'Pkey2',
'[automatic|dependent]').
*/
I am attaching the new ../contrib/spi/refint.c file which will do this.
I will be glad to help in case of any problems.
- Anand.
Peter Eisentraut
Tom Lane
Bruce Momjian
Tatsuo Ishii
D'Arcy J.M. Cain
Peter Mount
Marc G. Fournier
Thomas G. Lockhart
Jan Wieck
Vadim B. Mikheev