Commit caba8f0d43 wasn't quite right for msys, as demonstrated by
several buildfarm animals, including jacana and fairywren. We need to
use the msys perl in the archive command, but call it in such a way that
Windows will understand the path. Furthermore, inside the copy script we
need to convert a Windows path to an msys path.
This only happens if (1) the new standby has no WAL available locally,
(2) the new standby is starting from the old timeline, (3) the promotion
happened in the WAL segment from which the new standby is starting,
(4) the timeline history file for the new timeline is available from
the archive but the WAL files for are not (i.e. this is a race),
(5) the WAL files for the new timeline are available via streaming,
and (6) recovery_target_timeline='latest'.
Commit ee994272ca introduced this
logic and was an improvement over the previous code, but it mishandled
this case. If recovery_target_timeline='latest' and restore_command is
set, validateRecoveryParameters() can change recoveryTargetTLI to be
different from receiveTLI. If streaming is then tried afterward,
expectedTLEs gets initialized with the history of the wrong timeline.
It's supposed to be a list of entries explaining how to get to the
target timeline, but in this case it ends up with a list of entries
explaining how to get to the new standby's original timeline, which
isn't right.
Dilip Kumar and Robert Haas, reviewed by Kyotaro Horiguchi.
Discussion: http://postgr.es/m/CAFiTN-sE-jr=LB8jQuxeqikd-Ux+jHiXyh4YDiZMPedgQKup0g@mail.gmail.com
Previously there was no regression test for recovery pause feature.
This commit adds the test that checks
- recovery can be paused or resumed expectedly
- pg_get_wal_replay_pause_state() reports the correct pause state
- the paused state ends and promotion continues if a promotion
is triggered while recovery is paused
Suggested-by: Michael Paquier
Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Dilip Kumar
Discussion: https://postgr.es/m/YKNirzqM1HYyk5h4@paquier.xyz
Also "make reformat-dat-files".
The only change worthy of note is that pgindent messed up the formatting
of launcher.c's struct LogicalRepWorkerId, which led me to notice that
that struct wasn't used at all anymore, so I just took it out.
The buildfarm members "drongo" and "fairywren" reported that
the regression test (024_archive_recovery.pl) added by commit 9de9294b0c
failed. The cause of this failure is that the test calls $node->init()
without "allows_streaming => 1" and which doesn't add pg_hba.conf
entry for TCP/IP connection from pg_basebackup.
This commit fixes the issue by specifying "allows_streaming => 1"
when calling $node->init().
Author: Fujii Masao
Discussion: https://postgr.es/m/3cc3909d-f779-7a74-c201-f1f7f62c7497@oss.nttdata.com
Previously if hot standby was enabled, archive recovery exited with
an error when it found WAL generated with wal_level=minimal.
But if hot standby was disabled, it just reported a warning and
continued in that case. Which could lead to data loss or errors
during normal operation. A warning was emitted, but users could
easily miss that and not notice this serious situation until
they encountered the actual errors.
To improve this situation, this commit changes archive recovery
so that it exits with FATAL error when it finds WAL generated with
wal_level=minimal whatever the setting of hot standby. This enables
users to notice the serious situation soon.
The FATAL error is thrown if archive recovery starts from a base
backup taken before wal_level is changed to minimal. When archive
recovery exits with the error, if users have a base backup taken
after setting wal_level to higher than minimal, they can recover
the database by starting archive recovery from that newer backup.
But note that if such backup doesn't exist, there is no easy way to
complete archive recovery, which may make the database server
unstartable and users may lose whole database. The commit adds
the note about this risk into the document.
Even in the case of unstartable database server, previously by just
disabling hot standby users could avoid the error during archive
recovery, forcibly start up the server and salvage data from it.
But note that this commit makes this procedure unavailable at all.
Author: Takamichi Osumi
Reviewed-by: Laurenz Albe, Kyotaro Horiguchi, David Steele, Fujii Masao
Discussion: https://postgr.es/m/OSBPR01MB4888CBE1DA08818FD2D90ED8EDF90@OSBPR01MB4888.jpnprd01.prod.outlook.com
Common recommendations are that the checkpoint should be spread out as
much as possible, provided we avoid having it take too long. This
change updates the default to 0.9 (from 0.5) to match that
recommendation.
There was some debate about possibly removing the option entirely but it
seems there may be some corner-cases where having it set much lower to
try to force the checkpoint to be as fast as possible could result in
fewer periods of time of reduced performance due to kernel flushing.
General agreement is that the "spread more" is the preferred approach
though and those who need to tune away from that value are much less
common.
Reviewed-By: Michael Paquier, Peter Eisentraut, Tom Lane, David Steele,
Nathan Bossart
Discussion: https://postgr.es/m/20201207175329.GM16415%40tamriel.snowman.net
The test added by 595b9cb forgot that on Windows it is necessary to set
up pg_hba.conf (see PostgresNode::set_replication_conf) with a specific
entry or base backups fail. Any node that requires to support
replication just needs to pass down allows_streaming at initialization.
This updates the test to do so. Simplify things a bit while on it.
Per buildfarm member fairywren. Any Windows hosts running this test
would have failed, and I have reproduced the problem as well.
Backpatch-through: 10
Any transactions found as still prepared by a checkpoint have their
state data read from the WAL records generated by PREPARE TRANSACTION
before being moved into their new location within pg_twophase/. While
reading such records, the WAL reader uses the callback
read_local_xlog_page() to read a page, that is shared across various
parts of the system. This callback, since 1148e22a, has introduced an
update of ThisTimeLineID when reading a record while in recovery, which
is potentially helpful in the context of cascading WAL senders.
This update of ThisTimeLineID interacts badly with the checkpointer if a
promotion happens while some 2PC data is read from its record, as, by
changing ThisTimeLineID, any follow-up WAL records would be written to
an timeline older than the promoted one. This results in consistency
issues. For instance, a subsequent server restart would cause a failure
in finding a valid checkpoint record, resulting in a PANIC, for
instance.
This commit changes the code reading the 2PC data to reset the timeline
once the 2PC record has been read, to prevent messing up with the static
state of the checkpointer. It would be tempting to do the same thing
directly in read_local_xlog_page(). However, based on the discussion
that has led to 1148e22a, users may rely on the updates of
ThisTimeLineID when a WAL record page is read in recovery, so changing
this callback could break some cases that are working currently.
A TAP test reproducing the issue is added, relying on a PITR to
precisely trigger a promotion with a prepared transaction still
tracked.
Per discussion with Heikki Linnakangas, Kyotaro Horiguchi, Fujii Masao
and myself.
Author: Soumyadeep Chakraborty, Jimmy Yih, Kevin Yeap
Discussion: https://postgr.es/m/CAE-ML+_EjH_fzfq1F3RJ1=XaaNG=-Jz-i3JqkNhXiLAsM3z-Ew@mail.gmail.com
Backpatch-through: 10
This reverts commit 677271a3a1.
"Unbreak recovery test on Windows"
The test hangs on Windows, and attempts to remedy the problem have
proved fragile at best. So we simply disable the test on Windows perl.
(Msys perl seems perfectly happy).
Discussion: https://postgr.es/m/5b748470-7335-5439-e876-6a88c951e1c5@dunslane.net
The TAP test was written so that it was not waiting for the correct SQL
command, but for output from the preceding one. This resulted in race
conditions, allowing the commands to run in a different order, not block
as expected and so on. This fixes it by inverting the order of commands
where possible, so that observing the output guarantees the data was
inserted properly, and waiting for a lock to appear in pg_locks.
Discussion: https://postgr.es/m/CAH503wDKdYzyq7U-QJqGn%3DGm6XmoK%2B6_6xTJ-Yn5WSvoHLY1Ww%40mail.gmail.com
The test included in cd91de0d17 had two simple flaws.
Firstly, the number of rows was low and on some platforms (e.g. 32-bit)
the sort did not require on-disk sort, so on those machines it was not
testing the automatic removal. The test was however failing, because
without any temporary files the base/pgsql_tmp directory was not even
created. Fixed by increasing the rowcount to 5000, which should be high
engough on any platform.
Secondly, the test used a simple sleep to wait for the temporary file to
be created. This is obviously problematic, because on slow machines (or
with valgrind, CLOBBER_CACHE_ALWAYS etc.) it may take a while to create
the temporary file. But we also want the tests run reasonably fast.
Fixed by instead relying on a UNIQUE constraint, blocking the query that
created the temporary file.
Author: Euler Taveira
Reviewed-by: Tomas Vondra
Discussion: https://postgr.es/m/CAH503wDKdYzyq7U-QJqGn%3DGm6XmoK%2B6_6xTJ-Yn5WSvoHLY1Ww%40mail.gmail.com
After a crash of a backend using temporary files, the files used to be
left behind, on the basis that it might be useful for debugging. But we
don't have any reports of anyone actually doing that, and it means the
disk usage may grow over time due to repeated backend failures (possibly
even hitting ENOSPC). So this behavior is a bit unfortunate, and fixing
it required either manual cleanup (deleting files, which is error-prone)
or restart of the instance (i.e. service disruption).
This implements automatic cleanup of temporary files, controled by a new
GUC remove_temp_files_after_crash. By default the files are removed, but
it can be disabled to restore the old behavior if needed.
Author: Euler Taveira
Reviewed-by: Tomas Vondra, Michael Paquier, Anastasia Lubennikova, Thomas Munro
Discussion: https://postgr.es/m/CAH503wDKdYzyq7U-QJqGn%3DGm6XmoK%2B6_6xTJ-Yn5WSvoHLY1Ww%40mail.gmail.com
Under windows, psql processes need to be ended explicitly, or the TAP
tests hang. However, the recovery tests were doing this via
IPC::Run::kill_kill(), which causes other major problems on Windows.
We solve this by instead sending '\q' to psql so it quits of its own
accord, and then simply waiting for it. This means we can now run almost
all the recovery tests on all Windows platforms.
Discussion: https://postgr.es/m/20210301200715.tdjpuesfzebpffgn@alap3.anarazel.de
Feed the desired command to psql via "-c" not stdin, else Perl
may complain that it can't push stdin to an already-failed psql
process, as seen in intermittent buildfarm failures.
Make some minor cosmetic improvements while at it.
Before commit ee28cacf6 we had no tests here that expected failure
to connect, so there seems no need for a back-patch.
Discussion: https://postgr.es/m/CALDaNm2mo8YED=M2ZJKGf1U3F3mw6SaQuLXWCK8rZP6sECYcrA@mail.gmail.com
In addition to the existing options of "any" and "read-write", we
now support "read-only", "primary", "standby", and "prefer-standby".
"read-write" retains its previous meaning of "transactions are
read-write by default", and "read-only" inverts that. The other
three modes test specifically for hot-standby status, which is not
quite the same thing. (Setting default_transaction_read_only on
a primary server renders it read-only to this logic, but not a
standby.)
Furthermore, if talking to a v14 or later server, no extra network
round trip is needed to detect the session's status; the GUC_REPORT
variables delivered by the server are enough. When talking to an
older server, a SHOW or SELECT query is issued to detect session
read-only-ness or server hot-standby state, as needed.
Haribabu Kommi, Greg Nancarrow, Vignesh C, Tom Lane; reviewed at
various times by Laurenz Albe, Takayuki Tsunakawa, Peter Smith.
Discussion: https://postgr.es/m/CAF3+xM+8-ztOkaV9gHiJ3wfgENTq97QcjXQt+rbFQ6F7oNzt9A@mail.gmail.com
The psql processes were not explicitly killed (but would eventually
exit due postgres shutting down). For some reason windows perl doesn't
like that, resulting in errors like
Warning: unable to close filehandle GEN20 properly: Bad file descriptor during global destruction.
The test was introduced in d6734a897e3, so no backpatching necessary.
Commit fef5b47f6b added the regression test to check whether a standby is
able to follow a primary on a newer timeline when WAL archiving is enabled.
But the buildfarm member florican reported that this test failed because
the requested WAL segment was removed and replication failed. This is a
timing issue. Since neither replication slot is used nor wal_keep_size is set
in the test, checkpoint could remove the WAL segment that's still necessary
for replication.
This commit stabilizes the test by setting wal_keep_size.
Back-patch to v13 where the regression test that this commit stabilizes
was added.
Author: Fujii Masao
Discussion: https://postgr.es/m/X//PsenxcC50jDzX@paquier.xyz
Commit 709d003fbd refactored WAL-reading code, but accidentally caused
WalSndSegmentOpen() to fail to follow a timeline switch while reading from
a historic timeline. This issue caused a standby to fail to follow a primary
on a newer timeline when WAL archiving is enabled.
If there is a timeline switch within the segment, WalSndSegmentOpen() should
read from the WAL segment belonging to the new timeline. But previously
since it failed to follow a timeline switch, it tried to read the WAL segment
with old timeline. When WAL archiving is enabled, that WAL segment with
old timeline doesn't exist because it's renamed to .partial. This leads
a primary to have tried to read non-existent WAL segment, and which caused
replication to faill with the error "ERROR: requested WAL segment ... has
already been removed".
This commit fixes WalSndSegmentOpen() so that it's able to follow a timeline
switch, to ensure that a standby is able to follow a primary on a newer
timeline even when WAL archiving is enabled.
This commit also adds the regression test to check whether a standby is
able to follow a primary on a newer timeline when WAL archiving is enabled.
Back-patch to v13 where the bug was introduced.
Reported-by: Kyotaro Horiguchi
Author: Kyotaro Horiguchi, tweaked by Fujii Masao
Reviewed-by: Alvaro Herrera, Fujii Masao
Discussion: https://postgr.es/m/20201209.174314.282492377848029776.horikyota.ntt@gmail.com
The parsing of this parameter has been using strtoul(), which is not
portable across platforms. On most Unix platforms, unsigned long has a
size of 64 bits, while on Windows it is 32 bits. It is common in
recovery scenarios to rely on the output of txid_current() or even the
newer pg_current_xact_id() to get a transaction ID for setting up
recovery_target_xid. The value returned by those functions includes the
epoch in the computed result, which would cause strtoul() to fail where
unsigned long has a size of 32 bits once the epoch is incremented.
WAL records and 2PC data include only information about 32-bit XIDs and
it is not possible to have XIDs across more than one epoch, so
discarding the high bits from the transaction ID set has no impact on
recovery. On the contrary, the use of strtoul() prevents a consistent
behavior across platforms depending on the size of unsigned long.
This commit changes the parsing of recovery_target_xid to use
pg_strtouint64() instead, available down to 9.6. There is one TAP test
stressing recovery with recovery_target_xid, where a tweak based on
pg_reset{xlog,wal} is added to bump the XID epoch so as this change gets
tested, as per an idea from Alexander Lakhin.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/16780-107fd0c0385b1035@postgresql.org
Backpatch-through: 9.6
This makes use of CheckBuffer() introduced in c780a7a, adding a SQL
wrapper able to do checks for all the pages of a relation. By default,
all the fork types of a relation are checked, and it is possible to
check only a given relation fork. Note that if the relation given in
input has no physical storage or is temporary, then no errors are
generated, allowing full-database checks when coupled with a simple scan
of pg_class for example. This is not limited to clusters with data
checksums enabled, as clusters without data checksums can still apply
checks on pages using the page headers or for the case of a page full of
zeros.
This function returns a set of tuples consisting of:
- The physical file where a broken page has been detected (without the
segment number as that can be AM-dependent, which can be guessed from
the block number for heap). A relative path from PGPATH is used.
- The block number of the broken page.
By default, only superusers have an access to this function but
execution rights can be granted to other users.
The feature introduced here is still minimal, and more improvements
could be done, like:
- Addition of a start and end block number to run checks on a range
of blocks, which would apply only if one fork type is checked.
- Addition of some progress reporting.
- Throttling, with configuration parameters in function input or
potentially some cost-based GUCs.
Regression tests are added for positive cases in the main regression
test suite, and TAP tests are added for cases involving the emulation of
page corruptions.
Bump catalog version.
Author: Julien Rouhaud, Michael Paquier
Reviewed-by: Masahiko Sawada, Justin Pryzby
Discussion: https://postgr.es/m/CAOBaU_aVvMjQn=ge5qPiJOPMmOj5=ii3st5Q0Y+WuLML5sR17w@mail.gmail.com
Thanks to Andrew for proposing and testing this fix.
It's possible that we should address this on a more fundamental basis,
e.g. by configuring PerlIO to to CR/LF conversion for us, but this
approach already exists in other places. And it's nice to unbreak the
BF.
Proposed-By: Andrew Dunstan <andrew.dunstan@2ndquadrant.com>
Discussion: https://postgr.es/m/2355d1f0-0244-da9c-ef0c-7542b944e1ac@2ndQuadrant.com
I (Andres) broke this in 623a9CA79bx, because I didn't think about the
way snapshots are built on standbys sufficiently. Unfortunately our
existing tests did not catch this, as they are all just querying with
psql (therefore ending up with fresh snapshots).
The fix is trivial, we just need to increment the transaction
completion counter in ExpireTreeKnownAssignedTransactionIds(), which
is the equivalent of ProcArrayEndTransaction() during recovery.
This commit also adds a new test doing some basic testing of the
correctness of snapshots built on standbys. To avoid the
aforementioned issue of one-shot psql's not exercising the snapshot
caching, the test uses a long lived psqls, similar to
013_crash_restart.pl. It'd be good to extend the test further.
Reported-By: Ian Barwick <ian.barwick@2ndquadrant.com>
Author: Andres Freund <andres@anarazel.de>
Author: Ian Barwick <ian.barwick@2ndquadrant.com>
Discussion: https://postgr.es/m/61291ffe-d611-f889-68b5-c298da9fb18f@2ndquadrant.com
Reuse cautionary language from src/test/ssl/README in
src/test/kerberos/README. SLRUs have had access to six-character
segments names since commit 73c986adde,
and recovery stopped calling HeapTupleHeaderAdvanceLatestRemovedXid() in
commit 558a9165e0. The other corrections
are more self-evident.
max_slot_wal_keep_size that was added in v13 and wal_keep_segments are
the GUC parameters to specify how much WAL files to retain for
the standby servers. While max_slot_wal_keep_size accepts the number of
bytes of WAL files, wal_keep_segments accepts the number of WAL files.
This difference of setting units between those similar parameters could
be confusing to users.
To alleviate this situation, this commit renames wal_keep_segments to
wal_keep_size, and make users specify the WAL size in it instead of
the number of WAL files.
There was also the idea to rename max_slot_wal_keep_size to
max_slot_wal_keep_segments, in the discussion. But we have been moving
away from measuring in segments, for example, checkpoint_segments was
replaced by max_wal_size. So we concluded to rename wal_keep_segments
to wal_keep_size.
Back-patch to v13 where max_slot_wal_keep_size was added.
Author: Fujii Masao
Reviewed-by: Álvaro Herrera, Kyotaro Horiguchi, David Steele
Discussion: https://postgr.es/m/574b4ea3-e0f9-b175-ead2-ebea7faea855@oss.nttdata.com
The previous definition of the column was almost universally disliked,
so provide this updated definition which is more useful for monitoring
purposes: a large positive value is good, while zero or a negative value
means danger. This should be operationally more convenient.
Backpatch to 13, where the new column to pg_replication_slots (and the
feature it represents) were added.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Discussion: https://postgr.es/m/9ddfbf8c-2f67-904d-44ed-cf8bc5916228@oss.nttdata.com
In pg_replication_slot, change output from normal/reserved/lost to
reserved/extended/unreserved/ lost, which better expresses the possible
states particularly near the time where segments are no longer safe but
checkpoint has not run yet.
Under the new definition, reserved means the slot is consuming WAL
that's still under the normal WAL size constraints; extended means it's
consuming WAL that's being protected by wal_keep_segments or the slot
itself, whose size is below max_slot_wal_keep_size; unreserved means the
WAL is no longer safe, but checkpoint has not yet removed those files.
Such as slot is in imminent danger, but can still continue for a little
while and may catch up to the reserved WAL space.
Also, there were some bugs in the calculations used to report the
status; fixed those.
Backpatch to 13.
Reported-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20200616.120236.1809496990963386593.horikyota.ntt@gmail.com
Advancing a replication slot did not recompute the oldest xmin and LSN
values across replication slots, preventing resource removal like
segments not recycled at checkpoint time. The original commit that
introduced the slot advancing in 9c7d06d never did the update of those
oldest values, and b0afdca removed this code.
This commit adds a TAP test to check segment recycling with advancing
for physical slots, enforcing an extra segment switch before advancing
to check if the segment gets correctly recycled after a checkpoint.
Reported-by: Andres Freund
Reviewed-by: Alexey Kondratov, Kyptaro Horiguchi
Discussion: https://postgr.es/m/20200609171904.kpltxxvjzislidks@alap3.anarazel.de
Backpatch-through: 11
Since database connections can be used with WAL senders in 9.4, it is
possible to use physical replication. This commit fixes a crash when
starting physical replication with a WAL sender using a database
connection, caused by the refactoring done in 850196b.
There have been discussions about forbidding the use of physical
replication in a database connection, but this is left for later,
taking care only of the crash new to 13.
While on it, add a test to check for a failure when attempting logical
replication if the WAL sender does not have a database connection. This
part is extracted from a larger patch by Kyotaro Horiguchi.
Reported-by: Vladimir Sitnikov
Author: Michael Paquier, Kyotaro Horiguchi
Reviewed-by: Kyotaro Horiguchi, Álvaro Herrera
Discussion: https://postgr.es/m/CAB=Je-GOWMj1PTPkeUhjqQp-4W3=nW-pXe2Hjax6rJFffB5_Aw@mail.gmail.com
Backpatch-through: 13
In commit 850196b610 I (Álvaro) failed to handle the case of walsender
shutting down on an error before setting up its 'xlogreader' pointer;
the error handling code dereferences the pointer, causing a crash.
Fix by testing the pointer before trying to dereference it.
Kyotaro authored the code fix; I adopted Nathan's test case to be used
by the TAP tests and added the necessary PostgresNode change.
Reported-by: Nathan Bossart <bossartn@amazon.com>
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/C04FC24E-903D-4423-B312-6910E4D846E5@amazon.com
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
pg_recvlogical merely called PQfinish(), so the backend sent messages
after the disconnect. When that caused EPIPE in internal_flush(),
before a LogicalConfirmReceivedLocation(), the next pg_recvlogical would
repeat already-acknowledged records. Whether or not the defect causes
EPIPE, post-disconnect messages could contain an ErrorResponse that the
user should see. One properly ends PGRES_COPY_OUT by repeating
PQgetCopyData() until it returns a negative value. Augment one of the
tests to cover the case of WAL past --endpos. Back-patch to v10, where
commit 7c030783a5 first appeared. Before
that commit, pg_recvlogical never reached PGRES_COPY_OUT.
Reported by Thomas Munro.
Discussion: https://postgr.es/m/CAEepm=1MzM2Z_xNe4foGwZ1a+MO_2S9oYDq3M5D11=JDU_+0Nw@mail.gmail.com
Checkpointer uses its MyLatch to wake up when a checkpoint request is
received. But before commit c655077639 the latch was not used for
anything else, so the code could just go to sleep after each loop
without rechecking the sleeping condition. That commit added a separate
ResetLatch in its code path[1], which can cause a checkpoint to go
unnoticed for potentially a long time.
Fix by skipping sleep if any checkpoint flags are set. Also add a test
to verify this; authored by Kyotaro Horiguchi.
[1] CreateCheckPoint -> InvalidateObsoleteReplicationSlots ->
ConditionVariableTimeSleep
Report and diagnosis by Kyotaro Horiguchi.
Co-authored-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20200408.141956.891237856186513376.horikyota.ntt@gmail.com
This part of the test was included originally in 4e87c48, but got
reverted as of f9c1b8d because of timing issues in the test, where,
after more analysis, we found that the standbys may not have recovered
from the archives all the segments needed by the test. This stabilizes
the test by making sure that standbys replay up to the position returned
by pg_switch_wal(), meaning that all segments are recovered before the
manual checkpoint that tests WAL segment recycling and its interactions
with archive status files.
Author: Jehan-Guillaume de Rorthais
Reviewed-by: Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/20200424034248.GL33034@paquier.xyz
Buildfarm member chipmunk has failed twice due to taking >30s, and
twenty-four runs of other members have used >5s. The test is new in
v13, so no back-patch.
The test is proving to have timing issues when looking at archive status
files on standbys after crash recovery, while other parts of the test
rely on pg_stat_archiver as a wait point to make sure that a given state
of the archiving is reached. The coverage is not heavily impacted by
the removal those extra tests.
Per reports from several buildfarm animals, like crake, piculet,
culicidae and francolin.
Discussion: https://postgr.es/m/20200424005929.GK33034@paquier.xyz
Backpatch-through: 9.5
78ea8b5 has fixed an issue related to the recycling of WAL segments on
standbys depending on archive_mode. However, it has introduced a
regression with the handling of WAL segments ready to be archived during
crash recovery, causing those files to be recycled without getting
archived.
This commit fixes the regression by tracking in shared memory if a live
cluster is either in crash recovery or archive recovery as the handling
of WAL segments ready to be archived is different in both cases (those
WAL segments should not be removed during crash recovery), and by using
this new shared memory state to decide if a segment can be recycled or
not. Previously, it was not possible to know if a cluster was in crash
recovery or archive recovery as the shared state was able to track only
if recovery was happening or not, leading to the problem.
A set of TAP tests is added to close the gap here, making sure that WAL
segments ready to be archived are correctly handled when a cluster is in
archive or crash recovery with archive_mode set to "on" or "always", for
both standby and primary.
Reported-by: Benoît Lobréau
Author: Jehan-Guillaume de Rorthais
Reviewed-by: Kyotaro Horiguchi, Fujii Masao, Michael Paquier
Discussion: https://postgr.es/m/20200331172229.40ee00dc@firost
Backpatch-through: 9.5
Depending on specific values of restart_lsn or pg_current_wal_lsn()
is obviously unsafe. The previous coding tried to dodge this issue
by rounding off, but that's not good enough, as shown by multiple
buildfarm members. Nuke all the uses of these values except for
null-ness checks, pending some credible argument why we should think
something else could be usefully stable.
Kyotaro Horiguchi, further modified by me
Discussion: https://postgr.es/m/E1jM1Sa-0003mS-99@gemulon.postgresql.org
0f5ca02f53 introduces 3 new keywords. It appears to be too much for relatively
small feature. Given now we past feature freeze, it's already late for
discussion of the new syntax. So, revert.
Discussion: https://postgr.es/m/28209.1586294824%40sss.pgh.pa.us
Trying to ensure that a slot's restart_lsn or amount of reserved bytes
exactly match some specific values seems unnecessary, and fragile as
shown by failures in multiple buildfarm members.
Discussion: https://postgr.es/m/20200407232602.GA21559@alvherre.pgsql
Replication slots are useful to retain data that may be needed by a
replication system. But experience has shown that allowing them to
retain excessive data can lead to the primary failing because of running
out of space. This new feature allows the user to configure a maximum
amount of space to be reserved using the new option
max_slot_wal_keep_size. Slots that overrun that space are invalidated
at checkpoint time, enabling the storage to be released.
Author: Kyotaro HORIGUCHI <horiguchi.kyotaro@lab.ntt.co.jp>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20170228.122736.123383594.horiguchi.kyotaro@lab.ntt.co.jp
This commit adds following optional clause to BEGIN and START TRANSACTION
commands.
WAIT FOR LSN lsn [ TIMEOUT timeout ]
New clause pospones transaction start till given lsn is applied on standby.
This clause allows user be sure, that changes previously made on primary would
be visible on standby.
New shared memory struct is used to track awaited lsn per backend. Recovery
process wakes up backend once required lsn is applied.
Author: Ivan Kartyshov, Anna Akenteva
Reviewed-by: Craig Ringer, Thomas Munro, Robert Haas, Kyotaro Horiguchi
Reviewed-by: Masahiko Sawada, Ants Aasma, Dmitry Ivanov, Simon Riggs
Reviewed-by: Amit Kapila, Alexander Korotkov
Discussion: https://postgr.es/m/0240c26c-9f84-30ea-fca9-93ab2df5f305%40postgrespro.ru
The txid_XXX family of fmgr functions exposes 64 bit transaction IDs to
users as int8. Now that we have an SQL type xid8 for FullTransactionId,
define a new set of functions including pg_current_xact_id() and
pg_current_snapshot() based on that. Keep the old functions around too,
for now.
It's a bit sneaky to use the same C functions for both, but since the
binary representation is identical except for the signedness of the
type, and since older functions are the ones using the wrong signedness,
and since we'll presumably drop the older ones after a reasonable period
of time, it seems reasonable to switch to FullTransactionId internally
and share the code for both.
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Takao Fujii <btfujiitkp@oss.nttdata.com>
Reviewed-by: Yoshikazu Imai <imai.yoshikazu@fujitsu.com>
Reviewed-by: Mark Dilger <mark.dilger@enterprisedb.com>
Discussion: https://postgr.es/m/20190725000636.666m5mad25wfbrri%40alap3.anarazel.de
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Bump XLOG_PAGE_MAGIC, since this introduces XLOG_GIST_ASSIGN_LSN.
Future servers accept older WAL, so this bump is discretionary.
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
The parameters primary_conninfo, primary_slot_name and
wal_receiver_create_temp_slot can now be changed with a simple "reload"
signal, no longer requiring a server restart. This is achieved by
signalling the walreceiver process to terminate and having it start
again with the new values.
Thanks to Andres Freund, Kyotaro Horiguchi, Fujii Masao for discussion.
Author: Sergei Kornilov <sk@zsrv.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/19513901543181143@sas1-19a94364928d.qloud-c.yandex.net
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Back-patch to 9.5 (all supported versions). This introduces a new WAL
record type, XLOG_GIST_ASSIGN_LSN, without bumping XLOG_PAGE_MAGIC. As
always, update standby systems before master systems. This changes
sizeof(RelationData) and sizeof(IndexStmt), breaking binary
compatibility for affected extensions. (The most recent commit to
affect the same class of extensions was
089e4d405d0f3b94c74a2c6a54357a84a681754b.)
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
Advancing a physical replication slot with pg_replication_slot_advance()
did not mark the slot as dirty if any advancing was done, preventing the
follow-up checkpoint to flush the slot data to disk. This caused the
advancing to be lost even on clean restarts. This does not happen for
logical slots as any advancing marked the slot as dirty. Per
discussion, the original feature has been implemented so as in the event
of a crash the slot may move backwards to a past LSN. This property is
kept and more documentation is added about that.
This commit adds some new TAP tests to check the persistency of physical
and logical slots after advancing across clean restarts.
Author: Alexey Kondratov, Michael Paquier
Reviewed-by: Andres Freund, Kyotaro Horiguchi, Craig Ringer
Discussion: https://postgr.es/m/059cc53a-8b14-653a-a24d-5f867503b0ee@postgrespro.ru
Backpatch-through: 11
Before, if a recovery target is configured, but the archive ended
before the target was reached, recovery would end and the server would
promote without further notice. That was deemed to be pretty wrong.
With this change, if the recovery target is not reached, it is a fatal
error.
Based-on-patch-by: Leif Gunnar Erlandsen <leif@lako.no>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/993736dd3f1713ec1f63fc3b653839f5@lako.no
This test was trying to test the mechanism to release kernel FDs as needed
to get us under the max_safe_fds limit in case of spill files. To do that,
it needs to set max_files_per_process to a very low value which doesn't
even permit starting of the server in the case when there are a few already
opened files. This test also won't work on platforms where we use one FD
per semaphore.
Backpatch-through: 10, till where this test was added
Discussion:
https://postgr.es/m/CAA4eK1LHhERi06Q+MmP9qBXBBboi+7WV3910J0aUgz71LcnKAw@mail.gmail.comhttps://postgr.es/m/6485.1578583522@sss.pgh.pa.us
Currently while decoding changes, if the number of changes exceeds a
certain threshold, we spill those to disk. And this happens for each
(sub)transaction. Now, while reading all these files, we don't close them
until we read all the files. While reading these files, if the number of
such files exceeds the maximum number of file descriptors, the operation
errors out.
Use PathNameOpenFile interface to open these files as that internally has
the mechanism to release kernel FDs as needed to get us under the
max_safe_fds limit.
Reported-by: Amit Khandekar
Author: Amit Khandekar
Reviewed-by: Amit Kapila
Backpatch-through: 9.4
Discussion: https://postgr.es/m/CAJ3gD9c-sECEn79zXw4yBnBdOttacoE-6gAyP0oy60nfs_sabQ@mail.gmail.com
This commit revert the commits to add a test case that tests the 'force'
option when there is an active backend connected to the database being
dropped.
This feature internally sends SIGTERM to all the backends connected to the
database being dropped and then the same is reported to the client. We
found that on Windows, the client end of the socket is not able to read
the data once we close the socket in the server which leads to loss of
error message which is not what we expect. We also observed similar
behavior in other cases like pg_terminate_backend(),
pg_ctl kill TERM <pid>. There are probably a few others like that. The
fix for this requires further study.
Discussion: https://postgr.es/m/E1iaD8h-0004us-K9@gemulon.postgresql.org
The subroutine pump_until provides the functionality to poll until the
given string is matched, or a timeout occurs. This can be used from other
places as well, so moving it to TestLib.pm. The immediate need is for an
upcoming regression test patch for dropdb utility.
Author: Vignesh C
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CAP_rwwmLJJbn70vLOZFpxGw3XD7nLB_7+NKz46H5EOO2k5H7OQ@mail.gmail.com
cbc55da has reworked the order of some actions at the end of archive
recovery. Unfortunately this overlooked the fact that the startup
process needs to remove RECOVERYXLOG (for temporary WAL segment newly
recovered from archives) and RECOVERYHISTORY (for temporary history
file) at this step, leaving the files around even after recovery ended.
Backpatch to 9.5, like the previous commit.
Author: Sawada Masahiko
Reviewed-by: Fujii Masao, Michael Paquier
Discussion: https://postgr.es/m/CAD21AoBO_eDQub6zojFnWtnmutRBWvYf7=cW4Hsqj+U_R26w3Q@mail.gmail.com
Backpatch-through: 9.5
The test for SysV support currently involves looking for the perl
modules IPC::SharedMem and IPC::SysV. However, the perl on msys2 has
these modules but the tests fail. Therefore, force skipping the tests on
Windows platforms unconditionally.
Discussion: https://postgr.es/m/176e86ba-1a46-9d8c-5ae4-9865a463b411@2ndQuadrant.com
This approach provides a much tighter binding between a data directory
and the associated SysV shared memory block (and SysV or named-POSIX
semaphores, if we're using those). Key collisions are still possible,
but only between data directories stored on different filesystems,
so the situation should be negligible in practice. More importantly,
restarting the postmaster with a different port number no longer
risks failing to identify a relevant shared memory block, even when
postmaster.pid has been removed. A standalone backend is likewise
much more certain to detect conflicting leftover backends.
(In the longer term, we might now think about deprecating the port as
a cluster-wide value, so that one postmaster could support sockets
with varying port numbers. But that's for another day.)
The hazards fixed here apply only on Unix systems; our Windows code
paths already use identifiers derived from the data directory path
name rather than the port.
src/test/recovery/t/017_shm.pl, which intends to test key-collision
cases, has been substantially rewritten since it can no longer use
two postmasters with identical port numbers to trigger the case.
Instead, use Perl's IPC::SharedMem module to create a conflicting
shmem segment directly. The test script will be skipped if that
module is not available. (This means that some older buildfarm
members won't run it, but I don't think that that results in any
meaningful coverage loss.)
Patch by me; thanks to Noah Misch and Peter Eisentraut for discussion
and review.
Discussion: https://postgr.es/m/16908.1557521200@sss.pgh.pa.us
If a test case tried to set an invalid value of synchronous_standby_names,
the test script didn't detect that, which seems like a bad idea.
Noticed while testing a proposed patch that broke some of these
test cases.
Slow buildfarm machines have run into issues with this TAP test caused
by a race condition related to the startup of a set of standbys, where
it is possible to finish with an unexpected order in the WAL sender
array of the primary.
This closes the race condition by making sure that any standby started
is registered into the WAL sender array of the primary before starting
the next one based on lookups of pg_stat_replication.
Backpatch down to 9.6 where the test has been introduced.
Author: Michael Paquier
Reviewed-by: Álvaro Herrera, Noah Misch
Discussion: https://postgr.es/m/20190617055145.GB18917@paquier.xyz
Backpatch-through: 9.6
This fixes some TAP suites when using msys Perl and a builddir located
in an msys mount point other than "/". For example, builddir=/c/pg
exhibited the problem, since /c/pg falls in mount point "/c".
Back-patch to 9.6, where tests first started to perform such
translations. In back branches, offer both new and old APIs.
Reviewed by Andrew Dunstan.
Discussion: https://postgr.es/m/20190610045838.GA238501@rfd.leadboat.com
If contrib/pageinspect is not installed, this causes the test checking
the minimum recovery point to fail. The point is that the dependency
with pageinspect is not really necessary as the test does also all
checks with an offline cluster by scanning directly the on-disk pages,
which is enough for the purpose of the test.
Per complaint from Tom Lane.
Author: Michael Paquier
Discussion: https://postgr.es/m/17806.1555566345@sss.pgh.pa.us
Since Postgres 10, SHOW commands can be triggered with replication
connections in a WAL sender context, however it missed that a
transaction context is needed for syscache lookups. This commit makes
sure that the syscache lookups can happen correctly by setting a
transaction context when running SHOW commands in a WAL sender.
Superuser-only parameters can be displayed using SHOW commands not only
to superusers, but also to members of system role pg_read_all_settings,
which requires a syscache lookup to check if the connected role is a
member of this system role or not, or the instance crashes. Superusers
do not need to check the syscache so it worked correctly in this case.
New tests are added to cover this issue.
Reported-by: Alexander Kukushkin
Author: Michael Paquier
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/15734-2daa8761eeed8e20@postgresql.org
Backpatch-through: 10
postmaster startup scrutinizes any shared memory segment recorded in
postmaster.pid, exiting if that segment matches the current data
directory and has an attached process. When the postmaster.pid file was
missing, a starting postmaster used weaker checks. Change to use the
same checks in both scenarios. This increases the chance of a startup
failure, in lieu of data corruption, if the DBA does "kill -9 `head -n1
postmaster.pid` && rm postmaster.pid && pg_ctl -w start". A postmaster
will no longer stop if shmat() of an old segment fails with EACCES. A
postmaster will no longer recycle segments pertaining to other data
directories. That's good for production, but it's bad for integration
tests that crash a postmaster and immediately delete its data directory.
Such a test now leaks a segment indefinitely. No "make check-world"
test does that. win32_shmem.c already avoided all these problems. In
9.6 and later, enhance PostgresNode to facilitate testing. Back-patch
to 9.4 (all supported versions).
Reviewed (in earlier versions) by Daniel Gustafsson and Kyotaro HORIGUCHI.
Discussion: https://postgr.es/m/20190408064141.GA2016666@rfd.leadboat.com
Buildfarm members idiacanthus and komodoensis, which share a host, both
executed this test in the same second. That failed. Back-patch to 9.6,
where the test first appeared.
Discussion: https://postgr.es/m/20190404020543.GA1319573@rfd.leadboat.com
postmaster startup scrutinizes any shared memory segment recorded in
postmaster.pid, exiting if that segment matches the current data
directory and has an attached process. When the postmaster.pid file was
missing, a starting postmaster used weaker checks. Change to use the
same checks in both scenarios. This increases the chance of a startup
failure, in lieu of data corruption, if the DBA does "kill -9 `head -n1
postmaster.pid` && rm postmaster.pid && pg_ctl -w start". A postmaster
will no longer recycle segments pertaining to other data directories.
That's good for production, but it's bad for integration tests that
crash a postmaster and immediately delete its data directory. Such a
test now leaks a segment indefinitely. No "make check-world" test does
that. win32_shmem.c already avoided all these problems. In 9.6 and
later, enhance PostgresNode to facilitate testing. Back-patch to 9.4
(all supported versions).
Reviewed by Daniel Gustafsson and Kyotaro HORIGUCHI.
Discussion: https://postgr.es/m/20130911033341.GD225735@tornado.leadboat.com
When libpq is loaded in the server (for instance, by
libpqwalreceiver), it may use libpq environment variables set in the
postmaster environment for connection parameter defaults. This has
some confusing effects in our test suites. For example, the TAP test
infrastructure sets PGAPPNAME to allow identifying clients in the
server log. But this environment variable is also inherited by
temporary servers started with pg_ctl and is then in turn used by
libpqwalreceiver as the application_name for connecting to remote
servers where it then shows up in pg_stat_replication and is relevant
for things like synchronous_standby_names. Replication already has a
suitable default for application_name, and overriding that
accidentally then requires the individual test cases to re-override
that, which is all very confusing and unnecessary.
To fix, unset PGAPPNAME temporarily before running pg_ctl start or
restart in the tests.
More comprehensive approaches like unsetting all environment variables
in pg_ctl were considered but might be too complicated to achieve
portably.
The now unnecessary re-overriding of application_name by test cases is
also removed.
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://www.postgresql.org/message-id/flat/33383613-690e-6f1b-d5ba-4957ff40f6ce@2ndquadrant.com
A couple of queries are run on the primary to create and fill in a test
table, which gets checked on the standby afterwards. However the test
was not waiting for the confirmation that the necessary records have
been replayed on the standby, leading to spurious failures.
Per buildfarm member loach. Thanks to Thomas Munro for the report and
Tom Lane for the failure analysis.
Discussion: https://postgr.es/m/CA+hUKGLUpqG52xtriUz5RpmeKPoEfNxNc-CginG+Cx+X2-Ycew@mail.gmail.com
c186ba13 has fixed an issue related to the updates of the minimum
recovery LSN across multiple processes on standbys, but we never really
had a test case able to reliably check its logic.
This commit introduces a new test case to close the gap, and is designed
to check the consistency of data based on the minimum recovery point set
by either the startup process or the checkpointer for both an offline
cluster (by looking at the on-disk page headers) and an online cluster
(using pageinspect).
Note that with c186ba13 reverted, this test fails badly for both the
online and offline cases, as designed.
Author: Michael Paquier, Andrew Gierth
Reviewed-by: Andrew Gierth, Georgios Kokolatos, Arthur Zakirov
Discussion: https://postgr.es/m/20181108044525.GA17482@paquier.xyz
This is the only test that fails when run as an admin user. The reason
is that when Postgres is started via pg_ctl its admin privileges are
lowered. However, this test called 'postgres -D datadir' directly,
resulting in a failure. Replace that by calling pg_ctl and then checking
the result for the expected failure, and the logfile for the expected
error message.
The current set of TAP tests for two-phase transactions include some
coverage for post-commit callbacks of multixact, but it lacked tests for
testing the recovery of those callbacks. This commit adds some tests
with soft and hard restarts in this case, using transactions which
include DDLs.
Author: Michael Paquier
Reviewed-by: Oleksii Kliukin
Discussion: https://postgr.es/m/20190221055431.GO15532@paquier.xyz
Given the right timing, psql could emit "connection to server was lost"
rather than one of the other messages that this test script checked for.
It looks like commit 4247db625 may have made this more likely, but
I don't really believe it was impossible before then. Rather than
stress about it, just add that spelling as one of the crash-successfully-
detected cases.
Discussion: https://postgr.es/m/19344.1548554028@sss.pgh.pa.us
