Windows doesn't like setvbuf(..., _IOLBF) and crashes if you use it,
which has been causing the libpq_pipeline failures all along ... and our
own port.h has known about it for a long time: it offers PG_IOLBF that's
defined to _IONBF on that platform. Follow its advice.
While at it, get rid of a bogus bitshift that used a constant of the
wrong size. Decorate the constant as LL to fix. While at it, remove a
pointless addition that only confused matters.
All as diagnosed by Tom Lane.
Discussion: https://postgr.es/m/3458958.1617302154@sss.pgh.pa.us
Despite the clear comments pointing out that the duplicative code
segments in ReadHead() and _discoverArchiveFormat() needed to be
in sync, they were not: the latter did not bother to apply any of
the sanity checks in the former. We'd missed noticing this partly
because none of those checks would fail in scenarios we customarily
test, and partly because the oversight would be masked if both
segments execute, which they would in cases other than needing to
autodetect the format of a non-seekable stdin source. However,
in a case meeting all these requirements --- for example, trying
to read a newer-than-supported archive format from non-seekable
stdin --- pg_restore missed applying the version check and would
likely dump core or otherwise misbehave.
The whole thing is silly anyway, because there seems little reason
to duplicate the logic beyond the one-line verification that the
file starts with "PGDMP". There seems to have been an undocumented
assumption that multiple major formats (major enough to require
separate reader modules) would nonetheless share the first half-dozen
fields of the custom-format header. This seems unlikely, so let's
fix it by just nuking the duplicate logic in _discoverArchiveFormat().
Also get rid of the pointless attempt to seek back to the start of
the file after successful autodetection. That wastes cycles and
it means we have four behaviors to verify not two.
Per bug #16951 from Sergey Koposov. This has been broken for
decades, so back-patch to all supported versions.
Discussion: https://postgr.es/m/16951-a4dd68cf0de23048@postgresql.org
Through various refactorings over time, the extract(timezone_minute
from time with time zone) and extract(timezone_minute from timestamp
with time zone) implementations ended up with two different but
equally nonsensical formulas by using SECS_PER_MINUTE and
MINS_PER_HOUR interchangeably. Since those two are of course both the
same number, the formulas do work, but for readability, fix them to be
semantically correct.
I forgot to strdup() when processing argv[]. Apparently many platforms
hide this mistake from users, but in those that don't you may get a
program crash. Repair.
Per buildfarm member drongo, which is the only one in all the buildfarm
manifesting a problem here.
While at it, move "numrows" processing out of the line of special cases,
and make it getopt's -r instead. (A similar thing could be done to
'conninfo', but current use of the program doesn't warrant spending time
on that -- nowhere else we use conninfo in so simplistic a manner.)
Discussion: https://postgr.es/m/20210401124850.GA19247@alvherre.pgsql
This gives a small performance gain, by reducing the number of calls
to the conversion/verification function, and letting it work with
larger inputs. Also, reorganizing the input pipeline makes it easier
to parallelize the input parsing: after the input has been converted
to the database encoding, the next stage of finding the newlines can
be done in parallel, because there cannot be any newline chars
"embedded" in multi-byte characters in the encodings that we support
as server encodings.
This changes behavior in one corner case: if client and server
encodings are the same single-byte encoding (e.g. latin1), previously
the input would not be checked for zero bytes ('\0'). Any fields
containing zero bytes would be truncated at the zero. But if encoding
conversion was needed, the conversion routine would throw an error on
the zero. After this commit, the input is always checked for zeros.
Reviewed-by: John Naylor
Discussion: https://www.postgresql.org/message-id/e7861509-3960-538a-9025-b75a61188e01%40iki.fi
With the 'noError' argument, you can try to convert a buffer without
knowing the character boundaries beforehand. The functions now need to
return the number of input bytes successfully converted.
This is is a backwards-incompatible change, if you have created a custom
encoding conversion with CREATE CONVERSION. This adds a check to
pg_upgrade for that, refusing the upgrade if there are any user-defined
encoding conversions. Custom conversions are very rare, there are no
commonly used extensions that I know of that uses that feature. No other
objects can depend on conversions, so if you do have one, you can fairly
easily drop it before upgrading, and recreate it after the upgrade with
an updated version.
Add regression tests for built-in encoding conversions. This doesn't cover
every conversion, but it covers all the internal functions in conv.c that
are used to implement the conversions.
Reviewed-by: John Naylor
Discussion: https://www.postgresql.org/message-id/e7861509-3960-538a-9025-b75a61188e01%40iki.fi
Some sections of the documentation used "exclusive lock" to describe
that an ACCESS EXCLUSIVE lock is taken during a given operation. This
can be confusing to the reader as ACCESS SHARE is allowed with an
EXCLUSIVE lock is used, but that would not be the case with what is
described on those parts of the documentation.
Author: Greg Rychlewski
Discussion: https://postgr.es/m/CAKemG7VptD=7fNWckFMsMVZL_zzvgDO6v2yVmQ+ZiBfc_06kCQ@mail.gmail.com
Backpatch-through: 9.6
It is possible that while decoding a prepared transaction, it gets aborted
concurrently via a ROLLBACK PREPARED command. In that case, we were
skipping all the changes and directly sending Rollback Prepared when we
find the same in WAL. However, the downstream has no idea of the GID of
such a transaction. So, ensure to send prepare even when a concurrent
abort is detected.
Author: Ajin Cherian
Reviewed-by: Markus Wanner, Amit Kapila
Discussion: https://postgr.es/m/f82133c6-6055-b400-7922-97dae9f2b50b@enterprisedb.com
test_connect_ok() and test_connect_fails() have always been part of the
SSL tests, and check if a connection to the backend should work or not,
and there are sanity checks done on specific error patterns dropped by
libpq if the connection fails.
This was fundamentally wrong on two aspects. First, SSLServer.pm works
mostly on setting up and changing the SSL configuration of a
PostgresNode, and has really nothing to do with the client. Second,
the situation became worse in light of b34ca595, where the SSL tests
would finish by using a psql command that may not come from the same
installation as the node set up.
This commit moves those client routines into PostgresNode, making easier
the refactoring of SSLServer to become more SSL-implementation aware.
This can also be reused by the ldap, kerberos and authentication test
suites for connection checks, and a follow-up patch should extend those
interfaces to match with backend log patterns.
Author: Michael Paquier
Reviewed-by: Andrew Dunstan, Daniel Gustafsson, Álvaro Herrera
Discussion: https://postgr.es/m/YGLKNBf9zyh6+WSt@paquier.xyz
This removes "Add Result Cache executor node". It seems that something
weird is going on with the tracking of cache hits and misses as
highlighted by many buildfarm animals. It's not yet clear what the
problem is as other parts of the plan indicate that the cache did work
correctly, it's just the hits and misses that were being reported as 0.
This is especially a bad time to have the buildfarm so broken, so
reverting before too many more animals go red.
Discussion: https://postgr.es/m/CAApHDvq_hydhfovm4=izgWs+C5HqEeRScjMbOgbpC-jRAeK3Yw@mail.gmail.com
Here we add a new executor node type named "Result Cache". The planner
can include this node type in the plan to have the executor cache the
results from the inner side of parameterized nested loop joins. This
allows caching of tuples for sets of parameters so that in the event that
the node sees the same parameter values again, it can just return the
cached tuples instead of rescanning the inner side of the join all over
again. Internally, result cache uses a hash table in order to quickly
find tuples that have been previously cached.
For certain data sets, this can significantly improve the performance of
joins. The best cases for using this new node type are for join problems
where a large portion of the tuples from the inner side of the join have
no join partner on the outer side of the join. In such cases, hash join
would have to hash values that are never looked up, thus bloating the hash
table and possibly causing it to multi-batch. Merge joins would have to
skip over all of the unmatched rows. If we use a nested loop join with a
result cache, then we only cache tuples that have at least one join
partner on the outer side of the join. The benefits of using a
parameterized nested loop with a result cache increase when there are
fewer distinct values being looked up and the number of lookups of each
value is large. Also, hash probes to lookup the cache can be much faster
than the hash probe in a hash join as it's common that the result cache's
hash table is much smaller than the hash join's due to result cache only
caching useful tuples rather than all tuples from the inner side of the
join. This variation in hash probe performance is more significant when
the hash join's hash table no longer fits into the CPU's L3 cache, but the
result cache's hash table does. The apparent "random" access of hash
buckets with each hash probe can cause a poor L3 cache hit ratio for large
hash tables. Smaller hash tables generally perform better.
The hash table used for the cache limits itself to not exceeding work_mem
* hash_mem_multiplier in size. We maintain a dlist of keys for this cache
and when we're adding new tuples and realize we've exceeded the memory
budget, we evict cache entries starting with the least recently used ones
until we have enough memory to add the new tuples to the cache.
For parameterized nested loop joins, we now consider using one of these
result cache nodes in between the nested loop node and its inner node. We
determine when this might be useful based on cost, which is primarily
driven off of what the expected cache hit ratio will be. Estimating the
cache hit ratio relies on having good distinct estimates on the nested
loop's parameters.
For now, the planner will only consider using a result cache for
parameterized nested loop joins. This works for both normal joins and
also for LATERAL type joins to subqueries. It is possible to use this new
node for other uses in the future. For example, to cache results from
correlated subqueries. However, that's not done here due to some
difficulties obtaining a distinct estimation on the outer plan to
calculate the estimated cache hit ratio. Currently we plan the inner plan
before planning the outer plan so there is no good way to know if a result
cache would be useful or not since we can't estimate the number of times
the subplan will be called until the outer plan is generated.
The functionality being added here is newly introducing a dependency on
the return value of estimate_num_groups() during the join search.
Previously, during the join search, we only ever needed to perform
selectivity estimations. With this commit, we need to use
estimate_num_groups() in order to estimate what the hit ratio on the
result cache will be. In simple terms, if we expect 10 distinct values
and we expect 1000 outer rows, then we'll estimate the hit ratio to be
99%. Since cache hits are very cheap compared to scanning the underlying
nodes on the inner side of the nested loop join, then this will
significantly reduce the planner's cost for the join. However, it's
fairly easy to see here that things will go bad when estimate_num_groups()
incorrectly returns a value that's significantly lower than the actual
number of distinct values. If this happens then that may cause us to make
use of a nested loop join with a result cache instead of some other join
type, such as a merge or hash join. Our distinct estimations have been
known to be a source of trouble in the past, so the extra reliance on them
here could cause the planner to choose slower plans than it did previous
to having this feature. Distinct estimations are also fairly hard to
estimate accurately when several tables have been joined already or when a
WHERE clause filters out a set of values that are correlated to the
expressions we're estimating the number of distinct value for.
For now, the costing we perform during query planning for result caches
does put quite a bit of faith in the distinct estimations being accurate.
When these are accurate then we should generally see faster execution
times for plans containing a result cache. However, in the real world, we
may find that we need to either change the costings to put less trust in
the distinct estimations being accurate or perhaps even disable this
feature by default. There's always an element of risk when we teach the
query planner to do new tricks that it decides to use that new trick at
the wrong time and causes a regression. Users may opt to get the old
behavior by turning the feature off using the enable_resultcache GUC.
Currently, this is enabled by default. It remains to be seen if we'll
maintain that setting for the release.
Additionally, the name "Result Cache" is the best name I could think of
for this new node at the time I started writing the patch. Nobody seems
to strongly dislike the name. A few people did suggest other names but no
other name seemed to dominate in the brief discussion that there was about
names. Let's allow the beta period to see if the current name pleases
enough people. If there's some consensus on a better name, then we can
change it before the release. Please see the 2nd discussion link below
for the discussion on the "Result Cache" name.
Author: David Rowley
Reviewed-by: Andy Fan, Justin Pryzby, Zhihong Yu
Tested-By: Konstantin Knizhnik
Discussion: https://postgr.es/m/CAApHDvrPcQyQdWERGYWx8J%2B2DLUNgXu%2BfOSbQ1UscxrunyXyrQ%40mail.gmail.com
Discussion: https://postgr.es/m/CAApHDvq=yQXr5kqhRviT2RhNKwToaWr9JAN5t+5_PzhuRJ3wvg@mail.gmail.com
It's misplaced there -- it's not libpq's output stream to tweak in that
way. In particular, POSIX says that it has to be called before any
other operation on the file, so if a stream previously used by the
calling application, bad things may happen.
Put setvbuf() in libpq_pipeline for good measure.
Also, reduce fopen(..., "w+") to just fopen(..., "w") in
libpq_pipeline.c. It's not clear that this fixes anything, but we don't
use w+ anywhere.
Per complaints from Tom Lane.
Discussion: https://postgr.es/m/3337422.1617229905@sss.pgh.pa.us
Failing to do this can cause a crash, and I suspect is what has happened
with a buildfarm member reporting mysterious failures.
This is an ancient bug, but I'm not backpatching since evidently nobody
cares about PQtrace in older releases.
Discussion: https://postgr.es/m/3333908.1617227066@sss.pgh.pa.us
Some buildfarm animals with force_parallel_mode=regress were failing
this test because the error is reported in a parallel worker quicker
than the rows that succeed.
Take the opportunity to move the SET of lc_messages out of the traced
section, because it's not very interesting.
Diagnosed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/3304521.1617221724@sss.pgh.pa.us
We must cast the arguments of <ctype.h> functions to unsigned
char to avoid problems where char is signed.
Speaking of which, considering that this *is* a <ctype.h> function,
it's rather remarkable that we aren't seeing more complaints about
not having included that header.
Per buildfarm.
Remove confusion between time_t and pg_time_t; neither
gettimeofday() nor localtime() deal in the latter.
libpq indeed has no business using <pgtime.h> at all.
Use snprintf not sprintf, to ensure we can't overrun the
supplied buffer. (Unlikely, but let's be safe.)
Per buildfarm.
Since a4d75c86b, some buildfarm members have been warning that
Assert(attnum <= MaxAttrNumber);
is useless if attnum is an AttrNumber. I'm not certain how plausible
it is that the value coming out of the bitmap could actually exceed
MaxAttrNumber, but we seem to have thought that that was possible back
in 7300a6995. Revert the intermediate variable to int so that we have
the same overflow protection as before.
The new appendix groups information on renamed or removed settings,
commands, etc into an out-of-the-way part of the docs.
The original id elements are retained in each subsection to ensure that
the same filenames are produced for HTML docs. This prevents /current/
links on the web from breaking, and allows users of the web docs
to follow links from old version pages to info on the changes in the
new version. Prior to this change, a link to /current/ for renamed
sections like the recovery.conf docs would just 404. Similarly if
someone searched for recovery.conf they would find the pg11 docs,
but there would be no /12/ or /current/ link, so they couldn't easily
find out that it was removed in pg12 or how to adapt.
Index entries are also added so that there's a breadcrumb trail for
users to follow when they know the old name, but not what we changed it
to. So a user who is trying to find out how to set standby_mode in
PostgreSQL 12+, or where pg_resetxlog went, now has more chance of
finding that information.
Craig Ringer and Stephen Frost
Reviewed-by: Euler Taveira
Discussion: https://postgr.es/m/CAGRY4nzPNOyYQ_1-pWYToUVqQ0ThqP5jdURnJMZPm539fdizOg%40mail.gmail.com
Backpatch-through: 10
Some compilers seem to be concerned about the possibility that
recv_step is not any of the defined enum values. Silence
warnings about uninitialized cmdtag in a different way than
I did in 9fb9691a8.
Put the remote end's error message into the primary error string,
instead of relegating it to errdetail(). Although this could end up
being awkward if the remote sends us a really long error message,
it seems more in keeping with our message style guidelines, and more
helpful in situations where the errdetail could get dropped.
Peter Smith
Discussion: https://postgr.es/m/CAHut+Ps-Qv2yQceCwobQDP0aJOkfDzRFrOaR6+2Op2K=WHGeWg@mail.gmail.com
Test pipeline_abort was not checking that it got the rows it expected in
one mode; make it do so. This doesn't fix the actual problem (no idea
what that is, yet) but at least it should make it more obvious rather
than being visible only as a difference in the trace output.
While at it, fix other infelicities in the test:
* I reversed the order of result vs. expected in like().
* The output traces from -t are being put in the log dir, which means
the buildfarm script uselessly captures them. Put them in a separate
dir tmp_check/traces instead, to avoid cluttering the buildfarm results.
* Test pipelined_insert was using too large a row count. Reduce that a
tad and add a filler column to make each insert a little bulkier, while
still keeping enough that a buffer is filled and we have to switch mode.
According to the comments, when an invalid or dropped column oid is passed
to has_column_privilege(), the intention has always been to return NULL.
However, when the caller had table level privilege the invalid/missing
column was never discovered, because table permissions were checked first.
Fix that by introducing extended versions of pg_attribute_acl(check|mask)
and pg_class_acl(check|mask) which take a new argument, is_missing. When
is_missing is NULL, the old behavior is preserved. But when is_missing is
passed by the caller, no ERROR is thrown for dropped or missing
columns/relations, and is_missing is flipped to true. This in turn allows
has_column_privilege to check for column privileges first, providing the
desired semantics.
Not backpatched since it is a user visible behavioral change with no previous
complaints, and the fix is a bit on the invasive side.
Author: Joe Conway
Reviewed-By: Tom Lane
Reported by: Ian Barwick
Discussion: https://postgr.es/m/flat/9b5f4311-157b-4164-7fe7-077b4fe8ed84%40joeconway.com
This patch makes two closely related sets of changes:
1. For UPDATE, the subplan of the ModifyTable node now only delivers
the new values of the changed columns (i.e., the expressions computed
in the query's SET clause) plus row identity information such as CTID.
ModifyTable must re-fetch the original tuple to merge in the old
values of any unchanged columns. The core advantage of this is that
the changed columns are uniform across all tables of an inherited or
partitioned target relation, whereas the other columns might not be.
A secondary advantage, when the UPDATE involves joins, is that less
data needs to pass through the plan tree. The disadvantage of course
is an extra fetch of each tuple to be updated. However, that seems to
be very nearly free in context; even worst-case tests don't show it to
add more than a couple percent to the total query cost. At some point
it might be interesting to combine the re-fetch with the tuple access
that ModifyTable must do anyway to mark the old tuple dead; but that
would require a good deal of refactoring and it seems it wouldn't buy
all that much, so this patch doesn't attempt it.
2. For inherited UPDATE/DELETE, instead of generating a separate
subplan for each target relation, we now generate a single subplan
that is just exactly like a SELECT's plan, then stick ModifyTable
on top of that. To let ModifyTable know which target relation a
given incoming row refers to, a tableoid junk column is added to
the row identity information. This gets rid of the horrid hack
that was inheritance_planner(), eliminating O(N^2) planning cost
and memory consumption in cases where there were many unprunable
target relations.
Point 2 of course requires point 1, so that there is a uniform
definition of the non-junk columns to be returned by the subplan.
We can't insist on uniform definition of the row identity junk
columns however, if we want to keep the ability to have both
plain and foreign tables in a partitioning hierarchy. Since
it wouldn't scale very far to have every child table have its
own row identity column, this patch includes provisions to merge
similar row identity columns into one column of the subplan result.
In particular, we can merge the whole-row Vars typically used as
row identity by FDWs into one column by pretending they are type
RECORD. (It's still okay for the actual composite Datums to be
labeled with the table's rowtype OID, though.)
There is more that can be done to file down residual inefficiencies
in this patch, but it seems to be committable now.
FDW authors should note several API changes:
* The argument list for AddForeignUpdateTargets() has changed, and so
has the method it must use for adding junk columns to the query. Call
add_row_identity_var() instead of manipulating the parse tree directly.
You might want to reconsider exactly what you're adding, too.
* PlanDirectModify() must now work a little harder to find the
ForeignScan plan node; if the foreign table is part of a partitioning
hierarchy then the ForeignScan might not be the direct child of
ModifyTable. See postgres_fdw for sample code.
* To check whether a relation is a target relation, it's no
longer sufficient to compare its relid to root->parse->resultRelation.
Instead, check it against all_result_relids or leaf_result_relids,
as appropriate.
Amit Langote and Tom Lane
Discussion: https://postgr.es/m/CA+HiwqHpHdqdDn48yCEhynnniahH78rwcrv1rEX65-fsZGBOLQ@mail.gmail.com
This allows something like
SELECT ... FROM t1 JOIN t2 USING (a, b, c) AS x
where x has the columns a, b, c and unlike a regular alias it does not
hide the range variables of the tables being joined t1 and t2.
Per SQL:2016 feature F404 "Range variable for common column names".
Reviewed-by: Vik Fearing <vik.fearing@2ndquadrant.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/454638cf-d563-ab76-a585-2564428062af@2ndquadrant.com
This implements asynchronous execution, which runs multiple parts of a
non-parallel-aware Append concurrently rather than serially to improve
performance when possible. Currently, the only node type that can be
run concurrently is a ForeignScan that is an immediate child of such an
Append. In the case where such ForeignScans access data on different
remote servers, this would run those ForeignScans concurrently, and
overlap the remote operations to be performed simultaneously, so it'll
improve the performance especially when the operations involve
time-consuming ones such as remote join and remote aggregation.
We may extend this to other node types such as joins or aggregates over
ForeignScans in the future.
This also adds the support for postgres_fdw, which is enabled by the
table-level/server-level option "async_capable". The default is false.
Robert Haas, Kyotaro Horiguchi, Thomas Munro, and myself. This commit
is mostly based on the patch proposed by Robert Haas, but also uses
stuff from the patch proposed by Kyotaro Horiguchi and from the patch
proposed by Thomas Munro. Reviewed by Kyotaro Horiguchi, Konstantin
Knizhnik, Andrey Lepikhov, Movead Li, Thomas Munro, Justin Pryzby, and
others.
Discussion: https://postgr.es/m/CA%2BTgmoaXQEt4tZ03FtQhnzeDEMzBck%2BLrni0UWHVVgOTnA6C1w%40mail.gmail.com
Discussion: https://postgr.es/m/CA%2BhUKGLBRyu0rHrDCMC4%3DRn3252gogyp1SjOgG8SEKKZv%3DFwfQ%40mail.gmail.com
Discussion: https://postgr.es/m/20200228.170650.667613673625155850.horikyota.ntt%40gmail.com
ParseNamespaceItem had a wired-in assumption that p_rte->eref
describes the table and column aliases exposed by the nsitem. This
relaxes this by creating a separate p_names field in an nsitem. This
is mainly preparation for a patch for JOIN USING aliases, but it saves
one indirection in common code paths, so it's possibly a win on its
own.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/785329.1616455091@sss.pgh.pa.us
We always inserted a larger-than-fillfactor tuple into a newly-extended
page, even when existing pages were empty or contained nothing but an
unused line pointer. This was unnecessary relation extension. Start
tolerating page usage up to 1/8 the maximum space that could be taken up
by line pointers. This is somewhat arbitrary, but it should allow more
cases to reuse pages. This has no effect on tables with fillfactor=100
(the default).
John Naylor and Floris van Nee. Reviewed by Matthias van de Meent.
Reported by Floris van Nee.
Discussion: https://postgr.es/m/6e263217180649339720afe2176c50aa@opammb0562.comp.optiver.com
When specified, only extensions matching the given pattern are included
in dumps. Similarly to --table and --schema, when --strict-names is
used, a perfect match is required. Also, like the two other options,
this new option offers no guarantee that dependent objects have been
dumped, so a restore may fail on a clean database.
Tests are added in test_pg_dump/, checking after a set of positive and
negative cases, with or without an extension's contents added to the
dump generated.
Author: Guillaume Lelarge
Reviewed-by: David Fetter, Tom Lane, Michael Paquier, Asif Rehman,
Julien Rouhaud
Discussion: https://postgr.es/m/CAECtzeXOt4cnMU5+XMZzxBPJ_wu76pNy6HZKPRBL-j7yj1E4+g@mail.gmail.com
Whilst poking at nodeModifyTable.c, I chanced to notice that while
its calls to ExecBR*Triggers and ExecIR*Triggers are protected by
tests to see if there are any relevant triggers to fire, its calls
to ExecAR*Triggers are not; the latter functions do the equivalent
tests themselves. This seems possibly reasonable given the more
complex conditions involved, but what's less reasonable is that
the ExecAR* functions aren't careful to do no work when there is
no work to be done. ExecARInsertTriggers gets this right, but the
other two will both force creation of a slot that the query may
have no use for. ExecARUpdateTriggers additionally performed a
usually-useless ExecClearTuple() on that slot. This is probably
all pretty microscopic in real workloads, but a cycle shaved is a
cycle earned.
Transform the PQtrace output format from its ancient (and mostly
useless) byte-level output format to a logical-message-level output,
making it much more usable. This implementation allows the printing
code to be written (as it indeed was) by looking at the protocol
documentation, which gives more confidence that the three (docs, trace
code and actual code) actually match.
Author: 岩田 彩 (Aya Iwata) <iwata.aya@fujitsu.com>
Reviewed-by: 綱川 貴之 (Takayuki Tsunakawa) <tsunakawa.takay@fujitsu.com>
Reviewed-by: Kirk Jamison <k.jamison@fujitsu.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: 黒田 隼人 (Hayato Kuroda) <kuroda.hayato@fujitsu.com>
Reviewed-by: "Nagaura, Ryohei" <nagaura.ryohei@jp.fujitsu.com>
Reviewed-by: Ryo Matsumura <matsumura.ryo@fujitsu.com>
Reviewed-by: Greg Nancarrow <gregn4422@gmail.com>
Reviewed-by: Jim Doty <jdoty@pivotal.io>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/71E660EB361DF14299875B198D4CE5423DE3FBA4@g01jpexmbkw25
As committed in bbe0a81db, pg_dump from a pre-v14 server effectively
acts as though you'd said --no-toast-compression. I think the right
thing is for it to act as though default_toast_compression is set to
"pglz", instead, so that the tables' toast compression behavior is
preserved. You can always get the other behavior, if you want that,
by giving the switch.
Discussion: https://postgr.es/m/1112852.1616609702@sss.pgh.pa.us
Here we add a new output parameter to estimate_num_groups() to allow it to
inform the caller of additional, possibly useful information about the
estimation.
The new output parameter is a struct that currently contains just a single
field with a set of flags. This was done rather than having the flags as
an output parameter to allow future fields to be added without having to
change the signature of the function at a later date when we want to pass
back further information that might not be suitable to store in the flags
field.
It seems reasonable that one day in the future that the planner would want
to know more about the estimation. For example, how many individual sets
of statistics was the estimation generated from? The planner may want to
take that into account if we ever want to consider risks as well as costs
when generating plans.
For now, there's only 1 flag we set in the flags field. This is to
indicate if the estimation fell back on using the hard-coded constants in
any part of the estimation. Callers may like to change their behavior if
this is set, and this gives them the ability to do so. Callers may pass
the flag pointer as NULL if they have no interest in obtaining any
additional information about the estimate.
We're not adding any actual usages of these flags here. Some follow-up
commits will make use of this feature. Additionally, we're also not
making any changes to add support for clauselist_selectivity() and
clauselist_selectivity_ext(). However, if this is required in the future
then the same struct being added here should be fine to use as a new
output argument for those functions too.
Author: David Rowley
Discussion: https://postgr.es/m/CAApHDvqQqpk=1W-G_ds7A9CsXX3BggWj_7okinzkLVhDubQzjA@mail.gmail.com
Previously simplehash.h only exposed a method to perform a hash table
delete using the hash table key. This meant that the delete function had
to perform a hash lookup in order to find the entry to delete. Here we
add a new function so that users of simplehash.h can perform a hash delete
directly using the entry pointer, thus saving the hash lookup.
An upcoming patch that uses simplehash.h already has performed the hash
lookup so already has the entry pointer. This change will allow the
code in that patch to perform the hash delete without the code in
simplehash.h having to perform an additional hash lookup.
Author: David Rowley
Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/CAApHDvqFLXXge153WmPsjke5VGOSt7Ez0yD0c7eBXLfmWxs3Kw@mail.gmail.com
The existing regression tests only tested the lower boundary of the
range supported by the timestamp and timestamptz types because "The
upper boundary differs between integer and float timestamps, so no
check". Since this is obsolete, add similar tests for the upper
boundary.
Along with gid, this provides a different way to identify the transaction.
The users that use xid in some way to prepare the transactions can use it
to filter prepare transactions. The later commands COMMIT PREPARED or
ROLLBACK PREPARED carries both identifiers, providing an output plugin the
choice of what to use.
Author: Markus Wanner
Reviewed-by: Vignesh C, Amit Kapila
Discussion: https://postgr.es/m/ee280000-7355-c4dc-e47b-2436e7be959c@enterprisedb.com
Stephen Frost
Alvaro Herrera
Robert Haas
Tom Lane
Peter Eisentraut
Heikki Linnakangas
Michael Paquier
Amit Kapila
David Rowley
Joe Conway
Etsuro Fujita
Noah Misch
Bruce Momjian