Because we added StaticAssertStmt() first before StaticAssertDecl(),
some uses as well as the instructions in c.h are now a bit backwards
from the "native" way static assertions are meant to be used in C.
This updates the guidance and moves some static assertions to better
places.
Specifically, since the addition of StaticAssertDecl(), we can put
static assertions at the file level. This moves a number of static
assertions out of function bodies, where they might have been stuck
out of necessity, to perhaps better places at the file level or in
header files.
Also, when the static assertion appears in a position where a
declaration is allowed, then using StaticAssertDecl() is more native
than StaticAssertStmt().
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/941a04e7-dd6f-c0e4-8cdf-a33b3338cbda%40enterprisedb.com
Until now LWLockDequeueSelf() sequentially searched the list of waiters to see
if the current proc is still is on the list of waiters, or has already been
removed. In extreme workloads, where the wait lists are very long, this leads
to a quadratic behavior. #backends iterating over a list #backends
long. Additionally, the likelihood of needing to call LWLockDequeueSelf() in
the first place also increases with the increased length of the wait queue, as
it becomes more likely that a lock is released while waiting for the wait list
lock, which is held for longer during lock release.
Due to the exponential back-off in perform_spin_delay() this is surprisingly
hard to detect. We should make that easier, e.g. by adding a wait event around
the pg_usleep() - but that's a separate patch.
The fix is simple - track whether a proc is currently waiting in the wait list
or already removed but waiting to be woken up in PGPROC->lwWaiting.
In some workloads with a lot of clients contending for a small number of
lwlocks (e.g. WALWriteLock), the fix can substantially increase throughput.
As the quadratic behavior arguably is a bug, we might want to decide to
backpatch this fix in the future.
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/20221027165914.2hofzp4cvutj6gin@awork3.anarazel.de
Discussion: https://postgr.es/m/CALj2ACXktNbG=K8Xi7PSqbofTZozavhaxjatVc14iYaLu4Maag@mail.gmail.com
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in storage, catalog,
access method, executor, and logical replication code, as well as in
miscellaneous utility/library code.
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy. Later commits will do the
same for other parts of the codebase.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
dshash.c previously maintained flags to be able to assert that you
didn't hold any partition lock. These flags could get out of sync with
reality in error scenarios.
Get rid of all that, and make assertions about the locks themselves
instead. Since LWLockHeldByMe() loops internally, we don't want to put
that inside another loop over all partition locks. Introduce a new
debugging-only interface LWLockAnyHeldByMe() to avoid that.
This problem was noted by Tom and Andres while reviewing changes to
support the new shared memory stats system, and later showed up in
reality while working on commit 389869af.
Back-patch to 11, where dshash.c arrived.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Reported-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Kyotaro HORIGUCHI <horiguchi.kyotaro@lab.ntt.co.jp>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220311012712.botrpsikaufzteyt@alap3.anarazel.de
Discussion: https://postgr.es/m/CA%2BhUKGJ31Wce6HJ7xnVTKWjFUWQZPBngxfJVx4q0E98pDr3kAw%40mail.gmail.com
This reverts most of 91c0570a79, f28bf667f6, fe0972ee5e, afdeff1052. The
only thing left is the retry loop in 019_replslot_limit.pl that avoids
spurious failures by retrying a couple times.
We haven't seen any hard evidence that this is caused by anything but slow
process shutdown. We did not find any cases where walsenders did not vanish
after waiting for longer. Therefore there's no reason for this debugging code
to remain.
Discussion: https://postgr.es/m/20220530190155.47wr3x2prdwyciah@alap3.anarazel.de
Backpatch: 15-
Up until now, we've had a policy of only marking certain variables
in the PostgreSQL header files with PGDLLIMPORT, but now we've
decided to mark them all. This means that extensions running on
Windows should no longer operate at a disadvantage as compared to
extensions running on Linux: if the variable is present in a header
file, it should be accessible.
Discussion: http://postgr.es/m/CA+TgmoYanc1_FSfimhgiWSqVyP5KKmh5NP2BWNwDhO8Pg2vGYQ@mail.gmail.com
Previously the statistics collector received statistics updates via UDP and
shared statistics data by writing them out to temporary files regularly. These
files can reach tens of megabytes and are written out up to twice a
second. This has repeatedly prevented us from adding additional useful
statistics.
Now statistics are stored in shared memory. Statistics for variable-numbered
objects are stored in a dshash hashtable (backed by dynamic shared
memory). Fixed-numbered stats are stored in plain shared memory.
The header for pgstat.c contains an overview of the architecture.
The stats collector is not needed anymore, remove it.
By utilizing the transactional statistics drop infrastructure introduced in a
prior commit statistics entries cannot "leak" anymore. Previously leaked
statistics were dropped by pgstat_vacuum_stat(), called from [auto-]vacuum. On
systems with many small relations pgstat_vacuum_stat() could be quite
expensive.
Now that replicas drop statistics entries for dropped objects, it is not
necessary anymore to reset stats when starting from a cleanly shut down
replica.
Subsequent commits will perform some further code cleanup, adapt docs and add
tests.
Bumps PGSTAT_FILE_FORMAT_ID.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-By: "David G. Johnston" <david.g.johnston@gmail.com>
Reviewed-By: Tomas Vondra <tomas.vondra@2ndquadrant.com> (in a much earlier version)
Reviewed-By: Arthur Zakirov <a.zakirov@postgrespro.ru> (in a much earlier version)
Reviewed-By: Antonin Houska <ah@cybertec.at> (in a much earlier version)
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Discussion: https://postgr.es/m/20220308205351.2xcn6k4x5yivcxyd@alap3.anarazel.de
Discussion: https://postgr.es/m/20210319235115.y3wz7hpnnrshdyv6@alap3.anarazel.de
See also afdeff1052. Failures after that commit provided a few more hints,
but not yet enough to understand what's going on.
In 019_replslot_limit.pl shut down nodes with fast instead of immediate mode
if we observe the failure mode. That should tell us whether the failures we're
observing are just a timing issue under high load. PGCTLTIMEOUT should prevent
buildfarm animals from hanging endlessly.
Also adds a bit more logging to replication slot drop and ShutdownPostgres().
Discussion: https://postgr.es/m/20220225192941.hqnvefgdzaro6gzg@alap3.anarazel.de
1. Backends waiting for buffer I/O are now interruptible.
2. If something goes wrong in a backend that is currently performing
I/O, waiting backends no longer wake up until that backend reaches
AbortBufferIO() and broadcasts on the CV. Previously, any waiters would
wake up (because the I/O lock was automatically released) and then
busy-loop until AbortBufferIO() cleared BM_IO_IN_PROGRESS.
3. LWLockMinimallyPadded is removed, as it would now be unused.
Author: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> (earlier version, 2016)
Discussion: https://postgr.es/m/CA%2BhUKGJ8nBFrjLuCTuqKN0pd2PQOwj9b_jnsiGFFMDvUxahj_A%40mail.gmail.com
Discussion: https://postgr.es/m/CA+Tgmoaj2aPti0yho7FeEf2qt-JgQPRWb0gci_o1Hfr=C56Xng@mail.gmail.com
This was mostly confusing, especially since some wait events in
this class had the suffix and some did not.
While at it, stop exposing MainLWLockNames[] as a globally visible
name; any code using that directly is almost certainly wrong, as
its name has been misleading for some time.
(GetLWLockIdentifier() is what to use instead.)
Discussion: https://postgr.es/m/28683.1589405363@sss.pgh.pa.us
Choose names that fit into the conventions for wait event names
(particularly, that multi-word names are in the style MultiWordName)
and hopefully convey more information to non-hacker users than the
previous names did.
Also rename SerializablePredicateLockListLock to
SerializablePredicateListLock; the old name was long enough to cause
table formatting problems, plus the double occurrence of "Lock" seems
confusing/error-prone.
Also change a couple of particularly opaque LWLock field names.
Discussion: https://postgr.es/m/28683.1589405363@sss.pgh.pa.us
Originally, the names assigned to SLRUs had no purpose other than
being shmem lookup keys, so not a lot of thought went into them.
As of v13, though, we're exposing them in the pg_stat_slru view and
the pg_stat_reset_slru function, so it seems advisable to take a bit
more care. Rename them to names based on the associated on-disk
storage directories (which fortunately we *did* think about, to some
extent; since those are also visible to DBAs, consistency seems like
a good thing). Also rename the associated LWLocks, since those names
are likewise user-exposed now as wait event names.
For the most part I only touched symbols used in the respective modules'
SimpleLruInit() calls, not the names of other related objects. This
renaming could have been taken further, and maybe someday we will do so.
But for now it seems undesirable to change the names of any globally
visible functions or structs, so some inconsistency is unavoidable.
(But I *did* terminate "oldserxid" with prejudice, as I found that
name both unreadable and not descriptive of the SLRU's contents.)
Table 27.12 needs re-alphabetization now, but I'll leave that till
after the other LWLock renamings I have in mind.
Discussion: https://postgr.es/m/28683.1589405363@sss.pgh.pa.us
Previously, the SERIALIZABLE isolation level prevented parallel query
from being used. Allow the two features to be used together by
sharing the leader's SERIALIZABLEXACT with parallel workers.
An extra per-SERIALIZABLEXACT LWLock is introduced to make it safe to
share, and new logic is introduced to coordinate the early release
of the SERIALIZABLEXACT required for the SXACT_FLAG_RO_SAFE
optimization, as follows:
The first backend to observe the SXACT_FLAG_RO_SAFE flag (set by
some other transaction) will 'partially release' the SERIALIZABLEXACT,
meaning that the conflicts and locks it holds are released, but the
SERIALIZABLEXACT itself will remain active because other backends
might still have a pointer to it.
Whenever any backend notices the SXACT_FLAG_RO_SAFE flag, it clears
its own MySerializableXact variable and frees local resources so that
it can skip SSI checks for the rest of the transaction. In the
special case of the leader process, it transfers the SERIALIZABLEXACT
to a new variable SavedSerializableXact, so that it can be completely
released at the end of the transaction after all workers have exited.
Remove the serializable_okay flag added to CreateParallelContext() by
commit 9da0cc35, because it's now redundant.
Author: Thomas Munro
Reviewed-by: Haribabu Kommi, Robert Haas, Masahiko Sawada, Kevin Grittner
Discussion: https://postgr.es/m/CAEepm=0gXGYhtrVDWOTHS8SQQy_=S9xo+8oCxGLWZAOoeJ=yzQ@mail.gmail.com
This allows the compiler / linker to mark affected pages as read-only.
There's other cases, but they're a bit more invasive, and should go
through some review. These are easy.
They were found with
objdump -j .data -t src/backend/postgres|awk '{print $4, $5, $6}'|sort -r|less
Discussion: https://postgr.es/m/20181015200754.7y7zfuzsoux2c4ya@alap3.anarazel.de
Introduce parallel-aware hash joins that appear in EXPLAIN plans as Parallel
Hash Join with Parallel Hash. While hash joins could already appear in
parallel queries, they were previously always parallel-oblivious and had a
partial subplan only on the outer side, meaning that the work of the inner
subplan was duplicated in every worker.
After this commit, the planner will consider using a partial subplan on the
inner side too, using the Parallel Hash node to divide the work over the
available CPU cores and combine its results in shared memory. If the join
needs to be split into multiple batches in order to respect work_mem, then
workers process different batches as much as possible and then work together
on the remaining batches.
The advantages of a parallel-aware hash join over a parallel-oblivious hash
join used in a parallel query are that it:
* avoids wasting memory on duplicated hash tables
* avoids wasting disk space on duplicated batch files
* divides the work of building the hash table over the CPUs
One disadvantage is that there is some communication between the participating
CPUs which might outweigh the benefits of parallelism in the case of small
hash tables. This is avoided by the planner's existing reluctance to supply
partial plans for small scans, but it may be necessary to estimate
synchronization costs in future if that situation changes. Another is that
outer batch 0 must be written to disk if multiple batches are required.
A potential future advantage of parallel-aware hash joins is that right and
full outer joins could be supported, since there is a single set of matched
bits for each hashtable, but that is not yet implemented.
A new GUC enable_parallel_hash is defined to control the feature, defaulting
to on.
Author: Thomas Munro
Reviewed-By: Andres Freund, Robert Haas
Tested-By: Rafia Sabih, Prabhat Sahu
Discussion:
https://postgr.es/m/CAEepm=2W=cOkiZxcg6qiFQP-dHUe09aqTrEMM7yJDrHMhDv_RA@mail.gmail.comhttps://postgr.es/m/CAEepm=37HKyJ4U6XOLi=JgfSHM3o6B-GaeO-6hkOmneTDkH+Uw@mail.gmail.com
SharedTuplestore allows multiple participants to write into it and
then read the tuples back from it in parallel. Each reader receives
partial results.
For now it always uses disk files, but other buffering policies and
other kinds of scans (ie each reader receives complete results) may be
useful in future.
The upcoming parallel hash join feature will use this facility.
Author: Thomas Munro
Reviewed-By: Peter Geoghegan, Andres Freund, Robert Haas
Discussion: https://postgr.es/m/CAEepm=2W=cOkiZxcg6qiFQP-dHUe09aqTrEMM7yJDrHMhDv_RA@mail.gmail.com
When we create an Append node, we can spread out the workers over the
subplans instead of piling on to each subplan one at a time, which
should typically be a bit more efficient, both because the startup
cost of any plan executed entirely by one worker is paid only once and
also because of reduced contention. We can also construct Append
plans using a mix of partial and non-partial subplans, which may allow
for parallelism in places that otherwise couldn't support it.
Unfortunately, this patch doesn't handle the important case of
parallelizing UNION ALL by running each branch in a separate worker;
the executor infrastructure is added here, but more planner work is
needed.
Amit Khandekar, Robert Haas, Amul Sul, reviewed and tested by
Ashutosh Bapat, Amit Langote, Rafia Sabih, Amit Kapila, and
Rajkumar Raghuwanshi.
Discussion: http://postgr.es/m/CAJ3gD9dy0K_E8r727heqXoBmWZ83HwLFwdcaSSmBQ1+S+vRuUQ@mail.gmail.com
Tuples can have type RECORDOID and a typmod number that identifies a blessed
TupleDesc in a backend-private cache. To support the sharing of such tuples
through shared memory and temporary files, provide a typmod registry in
shared memory.
To achieve that, introduce per-session DSM segments, created on demand when a
backend first runs a parallel query. The per-session DSM segment has a
table-of-contents just like the per-query DSM segment, and initially the
contents are a shared record typmod registry and a DSA area to provide the
space it needs to grow.
State relating to the current session is accessed via a Session object
reached through global variable CurrentSession that may require significant
redesign further down the road as we figure out what else needs to be shared
or remodelled.
Author: Thomas Munro
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CAEepm=0ZtQ-SpsgCyzzYpsXS6e=kZWqk3g5Ygn3MDV7A8dabUA@mail.gmail.com
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
When a shared iterator is used, each call to tbm_shared_iterate()
returns a result that has not yet been returned to any process
attached to the shared iterator. In other words, each cooperating
processes gets a disjoint subset of the full result set, but all
results are returned exactly once.
This is infrastructure for parallel bitmap heap scan.
Dilip Kumar. The larger patch set of which this is a part has been
reviewed and tested by (at least) Andres Freund, Amit Khandekar,
Tushar Ahuja, Rafia Sabih, Haribabu Kommi, and Thomas Munro.
Discussion: http://postgr.es/m/CAFiTN-uc4=0WxRGfCzs-xfkMYcSEWUC-Fon6thkJGjkh9i=13A@mail.gmail.com
The typical size of an LWLock is now 16 bytes even on 64-bit platforms,
and the size of slock_t is now irrelevant. But pg_atomic_uint32 can
(perhaps surprisingly) still be larger than 4 bytes, so there's still
some marginal point to allowing LWLOCK_MINIMAL_SIZE == 64.
Commit 008608b9d5 made the changes
that led to the need for these updates.
array_base and array_stride were added so that we could identify the
offset of an LWLock within a tranche, but this facility is only very
marginally used apart from the main tranche. So, give every lock in
the main tranche its own tranche ID and get rid of array_base,
array_stride, and all that's attached. For debugging facilities
(Trace_lwlocks and LWLOCK_STATS) print the pointer address of the
LWLock using %p instead of the offset. This is arguably more useful,
and certainly a lot cheaper. Drop the offset-within-tranche from
the information reported to dtrace and from one can't-happen message
inside lwlock.c.
The main user-visible impact of this change is that pg_stat_activity
will now report all waits for LWLocks as "LWLock" rather than
reporting some as "LWLockTranche" and others as "LWLockNamed".
The main motivation for this change is that the need to specify an
array_base and an array_stride is awkward for parallel query. There
is only a very limited supply of tranche IDs so we can't just keep
allocating new ones, and if we try to use the same tranche IDs every
time then we run into trouble when multiple parallel contexts are
use simultaneously. So if we didn't get rid of this mechanism we'd
have to make it even more complicated. By simplifying it in this
way, we instead reduce the size of the generated code for lwlock.c
by about 5%.
Discussion: http://postgr.es/m/CA+TgmoYsFn6NUW1x0AZtupJGUAs1UDY4dJtCN47_Q6D0sP80PA@mail.gmail.com
WaitLatch, WaitLatchOrSocket, and WaitEventSetWait now taken an
additional wait_event_info parameter; legal values are defined in
pgstat.h. This makes it possible to uniquely identify every point in
the core code where we are waiting for a latch; extensions can pass
WAIT_EXTENSION.
Because latches were the major wait primitive not previously covered
by this patch, it is now possible to see information in
pg_stat_activity on a large number of important wait events not
previously addressed, such as ClientRead, ClientWrite, and SyncRep.
Unfortunately, many of the wait events added by this patch will fail
to appear in pg_stat_activity because they're only used in background
processes which don't currently appear in pg_stat_activity. We should
fix this either by creating a separate view for such information, or
else by deciding to include them in pg_stat_activity after all.
Michael Paquier and Robert Haas, reviewed by Alexander Korotkov and
Thomas Munro.
Prior to commit 7882c3b0b9, it was
possible to use LWLocks within DSM segments, but that commit broke
this use case by switching from a doubly linked list to a circular
linked list. Switch back, using a new bit of general infrastructure
for maintaining lists of PGPROCs.
Thomas Munro, reviewed by me.
Previously we used a spinlock, in adition to the atomically manipulated
->state field, to protect the wait queue. But it's pretty simple to
instead perform the locking using a flag in state.
Due to 6150a1b0 BufferDescs, on platforms (like PPC) with > 1 byte
spinlocks, increased their size above 64byte. As 64 bytes are the size
we pad allocated BufferDescs to, this can increase false sharing;
causing performance problems in turn. Together with the previous commit
this reduces the size to <= 64 bytes on all common platforms.
Author: Andres Freund
Discussion: CAA4eK1+ZeB8PMwwktf+3bRS0Pt4Ux6Rs6Aom0uip8c6shJWmyg@mail.gmail.com20160327121858.zrmrjegmji2ymnvr@alap3.anarazel.de
When a process is waiting for a heavyweight lock, we will now indicate
the type of heavyweight lock for which it is waiting. Also, you can
now see when a process is waiting for a lightweight lock - in which
case we will indicate the individual lock name or the tranche, as
appropriate - or for a buffer pin.
Amit Kapila, Ildus Kurbangaliev, reviewed by me. Lots of helpful
discussion and suggestions by many others, including Alexander
Korotkov, Vladimir Borodin, and many others.
This finishes the work - spread across many commits over the last
several months - of putting each type of lock other than the named
individual locks into a separate tranche.
Amit Kapila
As of commit c1772ad922, there's no
longer any way of requesting additional LWLocks in the main tranche,
so we don't need NumLWLocks() or LWLockAssign() any more. Also,
some of the allocation counters that we had previously aren't needed
any more either.
Amit Kapila
The previous RequestAddinLWLocks() method had several disadvantages.
First, the locks would be in the main tranche; we've recently decided
that it's useful for LWLocks used for separate purposes to have
separate tranche IDs. Second, there wasn't any correlation between
what code called RequestAddinLWLocks() and what code called
LWLockAssign(); when multiple modules are in use, it could become
quite difficult to troubleshoot problems where LWLockAssign() ran out
of locks. To fix, create a concept of named LWLock tranches which
can be used either by extension or by core code.
Amit Kapila and Robert Haas
This is following in a long train of similar changes and for the same
reasons - see b319356f0e and
fe702a7b3f inter alia.
Author: Amit Kapila
Reviewed-by: Alexander Korotkov, Robert Haas
Previously, each PGPROC's backendLock was part of the main tranche,
and the PGPROC just contained a pointer. Now, the actual LWLock is
part of the PGPROC.
As with previous, similar patches, this makes it significantly easier
to identify these lwlocks in LWLOCK_STATS or Trace_lwlocks output
and improves modularity.
Author: Ildus Kurbangaliev
Reviewed-by: Amit Kapila, Robert Haas
Move the content lock directly into the BufferDesc, so that locking and
pinning a buffer touches only one cache line rather than two. Adjust
the definition of BufferDesc slightly so that this doesn't make the
BufferDesc any larger than one cache line (at least on platforms where
a spinlock is only 1 or 2 bytes).
We can't fit the I/O locks into the BufferDesc and stay within one
cache line, so move those to a completely separate tranche. This
leaves a relatively limited number of LWLocks in the main tranche, so
increase the padding of those remaining locks to a full cache line,
rather than allowing adjacent locks to share a cache line, hopefully
reducing false sharing.
Performance testing shows that these changes make little difference
on laptop-class machines, but help significantly on larger servers,
especially those with more than 2 sockets.
Andres Freund, originally based on an earlier patch by Simon Riggs.
Review and cosmetic adjustments (including heavy rewriting of the
comments) by me.
It's a bit cumbersome to use LWLockNewTrancheId(), because the returned
value needs to be shared between backends so that each backend can call
LWLockRegisterTranche() with the correct ID. So, for built-in tranches,
use a hard-coded value instead.
This is motivated by an upcoming patch adding further built-in tranches.
Andres Freund and Robert Haas
Bruce Momjian
Peter Eisentraut
Andres Freund
Peter Geoghegan
Thomas Munro
Robert Haas
Tom Lane
Amit Kapila
Michael Paquier
Peter Eisentraut
Simon Riggs