And the same for do_pg_stop_backup. The code in do_pg_* is not allowed
to access the catalogs. For manual base backups, the permissions
check can be handled in the calling function, and for streaming
base backups only users with the required permissions can get past
the authentication step in the first place.
Reported by Antonin Houska, diagnosed by Andres Freund
WAL records of hint bit updates is useful to tools that want to examine
which pages have been modified. In particular, this is required to make
the pg_rewind tool safe (without checksums).
This can also be used to test how much extra WAL-logging would occur if
you enabled checksums, without actually enabling them (which you can't
currently do without re-initdb'ing).
Sawada Masahiko, docs by Samrat Revagade. Reviewed by Dilip Kumar, with
further changes by me.
Set min_recovery_apply_delay to force a delay in recovery apply for commit and
restore point WAL records. Other records are replayed immediately. Delay is
measured between WAL record time and local standby time.
Robert Haas, Fabrízio de Royes Mello and Simon Riggs
Detailed review by Mitsumasa Kondo
When wal_level=logical, we'll log columns from the old tuple as
configured by the REPLICA IDENTITY facility added in commit
07cacba983. This makes it possible
a properly-configured logical replication solution to correctly
follow table updates even if they change the chosen key columns,
or, with REPLICA IDENTITY FULL, even if the table has no key at
all. Note that updates which do not modify the replica identity
column won't log anything extra, making the choice of a good key
(i.e. one that will rarely be changed) important to performance
when wal_level=logical is configured.
Each insert, update, or delete to a catalog table will also log
the CMIN and/or CMAX values of stamped by the current transaction.
This is necessary because logical decoding will require access to
historical snapshots of the catalog in order to decode some data
types, and the CMIN/CMAX values that we may need in order to judge
row visibility may have been overwritten by the time we need them.
Andres Freund, reviewed in various versions by myself, Heikki
Linnakangas, KONDO Mitsumasa, and many others.
Commit 9dc842f08 of 8.2 era prevented MultiXact truncation during crash
recovery, because there was no guarantee that enough state had been
setup, and because it wasn't deemed to be a good idea to remove data
during crash recovery anyway. Since then, due to Hot-Standby, streaming
replication and PITR, the amount of time a cluster can spend doing crash
recovery has increased significantly, to the point that a cluster may
even never come out of it. This has made not truncating the content of
pg_multixact/ not defensible anymore.
To fix, take care to setup enough state for multixact truncation before
crash recovery starts (easy since checkpoints contain the required
information), and move the current end-of-recovery actions to a new
TrimMultiXact() function, analogous to TrimCLOG().
At some later point, this should probably done similarly to the way
clog.c is doing it, which is to just WAL log truncations, but we can't
do that for the back branches.
Back-patch to 9.0. 8.4 also has the problem, but since there's no hot
standby there, it's much less pressing. In 9.2 and earlier, this patch
is simpler than in newer branches, because multixact access during
recovery isn't required. Add appropriate checks to make sure that's not
happening.
Andres Freund
RecoveryIsInProgress() can be called very frequently. During normal
operation, it just checks a backend-local variable and returns quickly,
but during hot standby, it checks a spinlock-protected shared variable.
Those spinlock acquisitions can become a point of contention on a busy
hot standby system.
Replace the spinlock acquisition with a memory barrier.
Per discussion with Andres Freund, Ants Aasma and Merlin Moncure.
The TYPEALIGN macro, and the related ones like MAXALIGN, don't work with
values larger than intptr_t, because TYPEALIGN casts the argument to
intptr_t to do the arithmetic. That's not a problem when dealing with
pointers or lengths or offsets related to pointers, but the XLogInsert
scaling patch added a call to MAXALIGN with an XLogRecPtr argument.
To fix, add wider variants of the macros, called TYPEALIGN64 and MAXALIGN64,
which are just like the existing variants but work with uint64 instead of
intptr_t.
Report and patch by David Rowley, analysis by Andres Freund.
This reverts commit 269e780822
and commit 5b571bb8c8.
Unfortunately, the initial patch had insufficient performance testing,
and resulted in a regression.
Per report by Thom Brown.
Performance testing shows that if the insertpos_lck spinlock and the fields
that it protects are on the same cache line with other variables that are
frequently accessed, the false sharing can hurt performance a lot. Keep
them apart by adding some padding.
This keeps the usual trigger file name unchanged from 9.2, avoiding nasty
issues if you use a pre-9.3 pg_ctl binary with a 9.3 server or vice versa.
The fallback behavior of creating a full checkpoint before starting up is now
triggered by a file called "fallback_promote". That can be useful for
debugging purposes, but we don't expect any users to have to resort to that
and we might want to remove that in the future, which is why the fallback
mechanism is undocumented.
Initialization of the first XLOG buffer at end-of-recovery was broken for
the case that the last read WAL record ended at a page boundary. Instead of
trying to copy the last full xlog page to the buffer cache in that case,
just set shared state so that the next page is initialized when the first
WAL record after startup is inserted. (that's what we did in earlier
version, too)
To make the shared state required for that case less surprising, replace the
XLogCtl->curridx variable, which was the index of the latest initialized
buffer, with an XLogRecPtr of how far the buffers have been initialized.
That also allows us to get rid of the XLogRecEndPtrToBufIdx macro.
While we're at it, make a similar change for XLogCtl->Write.curridx, getting
rid of that variable and calculating the next buffer to write from
XLogCtl->LogwrtResult instead.
Was broken by my xloginsert scaling patch. XLogCtl global variable needs
to be initialized in each process, as it's not inherited by fork() on
Windows.
This patch replaces WALInsertLock with a number of WAL insertion slots,
allowing multiple backends to insert WAL records to the WAL buffers
concurrently. This is particularly useful for parallel loading large amounts
of data on a system with many CPUs.
This has one user-visible change: switching to a new WAL segment with
pg_switch_xlog() now fills the remaining unused portion of the segment with
zeros. This potentially adds some overhead, but it has been a very common
practice by DBA's to clear the "tail" of the segment with an external
pg_clearxlogtail utility anyway, to make the WAL files compress better.
With this patch, it's no longer necessary to do that.
This patch adds a new GUC, xloginsert_slots, to tune the number of WAL
insertion slots. Performance testing suggests that the default, 8, works
pretty well for all kinds of worklods, but I left the GUC in place to allow
others with different hardware to test that easily. We might want to remove
that before release.
Reviewed by Andres Freund.
On some platforms, posix_fallocate() is available but may still return
EINVAL if the underlying filesystem does not support it. So, in case
of an error, fall through to the alternate implementation that just
writes zeros.
Per buildfarm failure and analysis by Tom Lane.
This function is more efficient than actually writing out zeroes to
the new file, per microbenchmarks by Jon Nelson. Also, it may reduce
the likelihood of WAL file fragmentation.
Jon Nelson, with review by Andres Freund, Greg Smith and me.
In 9.3, there's no particular limit on the number of bgworkers;
instead, we just count up the number that are actually registered,
and use that to set MaxBackends. However, that approach causes
problems for Hot Standby, which needs both MaxBackends and the
size of the lock table to be the same on the standby as on the
master, yet it may not be desirable to run the same bgworkers in
both places. 9.3 handles that by failing to notice the problem,
which will probably work fine in nearly all cases anyway, but is
not theoretically sound.
A further problem with simply counting the number of registered
workers is that new workers can't be registered without a
postmaster restart. This is inconvenient for administrators,
since bouncing the postmaster causes an interruption of service.
Moreover, there are a number of applications for background
processes where, by necessity, the background process must be
started on the fly (e.g. parallel query). While this patch
doesn't actually make it possible to register new background
workers after startup time, it's a necessary prerequisite.
Patch by me. Review by Michael Paquier.
We don't normally bother retrying when the number of bytes written by
write() is short of what was requested. It is generally assumed that a
write() to disk doesn't return short, unless you run out of disk space.
While writing the WAL, however, it seems prudent to try a bit harder,
because a failure leads to PANIC. The write() is also much larger than most
write()s in the backend (up to wal_buffers), so there's more room for
surprises.
Also retry on EINTR. All signals used in the backend are flagged SA_RESTART
nowadays, so it shouldn't happen, but better to be defensive.
In some cases with higher numbers of subtransactions
it was possible for us to incorrectly initialize
subtrans leading to complaints of missing pages.
Bug report by Sergey Konoplev
Analysis and fix by Andres Freund
MarkBufferDirtyHint() writes WAL, and should know if it's got a
standard buffer or not. Currently, the only callers where buffer_std
is false are related to the FSM.
In passing, rename XLOG_HINT to XLOG_FPI, which is more descriptive.
Back-patch to 9.3.
elog.c has historically treated LOG messages as low-priority during
bootstrap and standalone operation. This has led to confusion and even
masked a bug, because the normal expectation of code authors is that
elog(LOG) will put something into the postmaster log, and that wasn't
happening during initdb. So get rid of the special-case rule and make
the priority order the same as it is in normal operation. To keep from
cluttering initdb's output and the behavior of a standalone backend,
tweak the severity level of three messages routinely issued by xlog.c
during startup and shutdown so that they won't appear in these cases.
Per my proposal back in December.
Since commit f21bb9cfb5, this function
ignores the caller-provided length and loops until it finds a
terminator, which GetVirtualXIDsDelayingChkpt() never adds. Restore the
previous loop control logic. In passing, revert the addition of an
unused variable by the same commit, presumably a debugging relic.
Seems cleaner to get the currently-replayed TLI in the same call to
GetXLogReplayRecPtr that we get the WAL position. Make it more clear in the
comment what the code does when recovery has already ended
(RecoveryInProgress() will set ThisTimeLineID in that case). Finally, make
resetting ThisTimeLineID afterwards more explicit.
Make slightly better decisions about indentation than what pgindent
is capable of. Mostly breaking out long function calls into one
line per argument, with a few other minor adjustments.
No functional changes- all whitespace.
pgindent ran cleanly (didn't change anything) after.
Passes all regressions.
checkpointer needs to reset ThisTimeLineID after
a restartpoint to allow installing/recycling new
WAL files. If recovery has already ended this
would leave ThisTimeLineID set incorrectly and
so we must reset it otherwise later checkpoints
do not have the correct timeline.
Bug report by Heikki Linnakangas.
Further investigation by Heikki and myself.
This simplifies the handling of crashes after fast promotion and various
minor cases that can exist in short timing windows around that case.
Broad fix to bug reported by Michael Paquier on -hackers,
approach prompted by Heikki Linnakangas
If a standby server has a cascading standby server connected to it, it's
possible that WAL has already been sent up to the next WAL page boundary,
splitting a WAL record in the middle, when the first standby server is
promoted. Don't throw an assertion failure or error in walsender if that
happens.
Also, fix a variant of the same bug in pg_receivexlog: if it had already
received WAL on previous timeline up to a segment boundary, when the
upstream standby server is promoted so that the timeline switch record falls
on the previous segment, pg_receivexlog would miss the segment containing
the timeline switch. To fix that, have walsender send the position of the
timeline switch at end-of-streaming, in addition to the next timeline's ID.
It was previously assumed that the switch happened exactly where the
streaming stopped.
Note: this is an incompatible change in the streaming protocol. You might
get an error if you try to stream over timeline switches, if the client is
running 9.3beta1 and the server is more recent. It should be fine after a
reconnect, however.
Reported by Fujii Masao.
Heikki reported comment was wrong, so fixed
code to match the comment: we only need to
take additional locking precautions when we
have a shared lock on the buffer.
We copy the buffer before inserting an XLOG_HINT to avoid WAL CRC errors
caused by concurrent hint writes to buffer while share locked. To make this work
we refactor RestoreBackupBlock() to allow an XLOG_HINT to avoid the normal
path for backup blocks, which assumes the underlying buffer is exclusive locked.
Resulting code completely changes layout of XLOG_HINT WAL records, but
this isn't even beta code, so this is a low impact change.
In passing, avoid taking WALInsertLock for full page writes on checksummed
hints, remove related cruft from XLogInsert() and improve xlog_desc record for
XLOG_HINT.
Andres Freund
Bug report by Fujii Masao, testing by Jeff Janes and Jaime Casanova,
review by Jeff Davis and Simon Riggs. Applied with changes from review
and some comment editing.
The pg_start_backup() and pg_stop_backup() functions checked the privileges
of the initially-authenticated user rather than the current user, which is
wrong. For example, a user-defined index function could successfully call
these functions when executed by ANALYZE within autovacuum. This could
allow an attacker with valid but low-privilege database access to interfere
with creation of routine backups. Reported and fixed by Noah Misch.
Security: CVE-2013-1901
Checksums are set immediately prior to flush out of shared buffers
and checked when pages are read in again. Hint bit setting will
require full page write when block is dirtied, which causes various
infrastructure changes. Extensive comments, docs and README.
WARNING message thrown if checksum fails on non-all zeroes page;
ERROR thrown but can be disabled with ignore_checksum_failure = on.
Feature enabled by an initdb option, since transition from option off
to option on is long and complex and has not yet been implemented.
Default is not to use checksums.
Checksum used is WAL CRC-32 truncated to 16-bits.
Simon Riggs, Jeff Davis, Greg Smith
Wide input and assistance from many community members. Thank you.
Bruce Momjian
Magnus Hagander
Robert Haas
Fujii Masao
Heikki Linnakangas
Simon Riggs
Tom Lane
Alvaro Herrera
Jeff Davis
Peter Eisentraut
Noah Misch
Stephen Frost