There may be some other places where we should use errdetail_internal,
but they'll have to be evaluated case-by-case. This commit just hits
a bunch of places where invoking gettext is obviously a waste of cycles.
Regular aggregate functions in combination with, or within the arguments
of, window functions are OK per spec; they have the semantics that the
aggregate output rows are computed and then we run the window functions
over that row set. (Thus, this combination is not really useful unless
there's a GROUP BY so that more than one aggregate output row is possible.)
The case without GROUP BY could fail, as recently reported by Jeff Davis,
because sloppy construction of the Agg node's targetlist resulted in extra
references to possibly-ungrouped Vars appearing outside the aggregate
function calls themselves. See the added regression test case for an
example.
Fixing this requires modifying the API of flatten_tlist and its underlying
function pull_var_clause. I chose to make pull_var_clause's API for
aggregates identical to what it was already doing for placeholders, since
the useful behaviors turn out to be the same (error, report node as-is, or
recurse into it). I also tightened the error checking in this area a bit:
if it was ever valid to see an uplevel Var, Aggref, or PlaceHolderVar here,
that was a long time ago, so complain instead of ignoring them.
Backpatch into 9.1. The failure exists in 8.4 and 9.0 as well, but seeing
that it only occurs in a basically-useless corner case, it doesn't seem
worth the risks of changing a function API in a minor release. There might
be third-party code using pull_var_clause.
In the previous coding, we would look up a relation in RangeVarGetRelid,
lock the resulting OID, and then AcceptInvalidationMessages(). While
this was sufficient to ensure that we noticed any changes to the
relation definition before building the relcache entry, it didn't
handle the possibility that the name we looked up no longer referenced
the same OID. This was particularly problematic in the case where a
table had been dropped and recreated: we'd latch on to the entry for
the old relation and fail later on. Now, we acquire the relation lock
inside RangeVarGetRelid, and retry the name lookup if we notice that
invalidation messages have been processed meanwhile. Many operations
that would previously have failed with an error in the presence of
concurrent DDL will now succeed.
There is a good deal of work remaining to be done here: many callers
of RangeVarGetRelid still pass NoLock for one reason or another. In
addition, nothing in this patch guards against the possibility that
the meaning of an unqualified name might change due to the creation
of a relation in a schema earlier in the user's search path than the
one where it was previously found. Furthermore, there's nothing at
all here to guard against similar race conditions for non-relations.
For all that, it's a start.
Noah Misch and Robert Haas
We were using GetConfigOption to collect the old value of each setting,
overlooking the possibility that it didn't exist yet. This does happen
in the case of adding a new entry within a custom variable class, as
exhibited in bug #6097 from Maxim Boguk.
To fix, add a missing_ok parameter to GetConfigOption, but only in 9.1
and HEAD --- it seems possible that some third-party code is using that
function, so changing its API in a minor release would cause problems.
In 9.0, create a near-duplicate function instead.
This is useful since a validator might want to require certain options
to be provided. The passed array is an empty text array in this case.
Per suggestion by Laurenz Albe, though this is not quite his patch.
The bug that caused this to be discovered is that the code was trying to
dereference a NULL or ill-defined pointer, as reported by Michael Mueller;
but what it was doing was wrong anyway, per Heikki.
This patch is Heikki's suggested fix.
Unlike the relistemp field which it replaced, relpersistence must be
set correctly quite early during the table creation process, as we
rely on it quite early on for a number of purposes, including security
checks. Normally, this is set based on whether the user enters CREATE
TABLE, CREATE UNLOGGED TABLE, or CREATE TEMPORARY TABLE, but a
relation may also be made implicitly temporary by creating it in
pg_temp. This patch fixes the handling of that case, and also
disables creation of unlogged tables in temporary tablespace (such
table indeed skip WAL-logging, but we reject an explicit
specification) and creation of relations in the temporary schemas of
other sessions (which is not very sensible, and didn't work right
anyway).
Report by Amit Khandekar.
This means that they can initially be added to a large existing table
without checking its initial contents, but new tuples must comply to
them; a separate pass invoked by ALTER TABLE / VALIDATE can verify
existing data and ensure it complies with the constraint, at which point
it is marked validated and becomes a normal part of the table ecosystem.
An non-validated CHECK constraint is ignored in the planner for
constraint_exclusion purposes; when validated, cached plans are
recomputed so that partitioning starts working right away.
This patch also enables domains to have unvalidated CHECK constraints
attached to them as well by way of ALTER DOMAIN / ADD CONSTRAINT / NOT
VALID, which can later be validated with ALTER DOMAIN / VALIDATE
CONSTRAINT.
Thanks to Thom Brown, Dean Rasheed and Jaime Casanova for the various
reviews, and Robert Hass for documentation wording improvement
suggestions.
This patch was sponsored by Enova Financial.
This involves two main changes from the previous behavior. First,
when we set a bit in the visibility map, emit a new WAL record of type
XLOG_HEAP2_VISIBLE. Replay sets the page-level PD_ALL_VISIBLE bit and
the visibility map bit. Second, when inserting, updating, or deleting
a tuple, we can no longer get away with clearing the visibility map
bit after releasing the lock on the corresponding heap page, because
an intervening crash might leave the visibility map bit set and the
page-level bit clear. Making this work requires a bit of interface
refactoring.
In passing, a few minor but related cleanups: change the test in
visibilitymap_set and visibilitymap_clear to throw an error if the
wrong page (or no page) is pinned, rather than silently doing nothing;
this case should never occur. Also, remove duplicate definitions of
InvalidXLogRecPtr.
Patch by me, review by Noah Misch.
Initially, we use this only to eliminate calls to the varchar()
function in cases where the length is not being reduced and, therefore,
the function call is equivalent to a RelabelType operation. The most
significant effect of this is that we can avoid a table rewrite when
changing a varchar(X) column to a varchar(Y) column, where Y > X.
Noah Misch, reviewed by me and Alexey Klyukin
Some callers were creating copies of tuple descriptors to pass to that
function, stating in code comments that it was necessary because it
modified the passed descriptor. Code inspection reveals this not to be
true, and indeed not all callers are passing copies in the first place.
So remove the extra ones and the misleading comments about this behavior
as well.
I mis-simplified the test where ANALYZE decided if it could get away
without doing anything: under the new regime, that's never allowed. Per
bug #6068 from Jeff Janes. Back-patch to 8.4, just like previous patch.
We had already converted most places to this style, but this patch gets the
last few that were still doing it the old way. The main advantage is that
this exposes a greppable name for each target column, rather than having
to rely on comments (which a couple of places failed to provide anyhow).
Richard Hopkins, additional work by me to clean up update_attstats() too
The initial commit of the ALTER TABLE ADD FOREIGN KEY NOT VALID feature
failed to support labeling such constraints as deferrable. The best fix
for this seems to be to fold NOT VALID into ConstraintAttributeSpec.
That's a bit more general than the documented syntax, but it allows
better-targeted syntax error messages.
In addition, do some mostly-but-not-entirely-cosmetic code review for
the whole NOT VALID patch.
Truncating or dropping a table is treated like deletion of all tuples, and
check for conflicts accordingly. If a table is clustered or rewritten by
ALTER TABLE, all predicate locks on the heap are promoted to relation-level
locks, because the tuple or page ids of any existing tuples will change and
won't be valid after rewriting the table. Arguably ALTER TABLE should be
treated like a mass-UPDATE of every row, but if you e.g change the datatype
of a column, you could also argue that it's just a change to the physical
layout, not a logical change. Reindexing promotes all locks on the index to
relation-level lock on the heap.
Kevin Grittner, with a lot of cosmetic changes by me.
My previous commit disallowed this operation, but did nothing about
cleaning up the damage if one had already been done. With the operation
disallowed, it's okay to just forcibly clear xmax in a sequence's tuple,
since any value seen there could not represent a live transaction's lock.
So, any sequence-specific operation will repair the problem automatically,
whether or not the user has already seen "could not access status of
transaction" failures.
When we added the ability for vacuum to skip heap pages by consulting the
visibility map, we made it just not update the reltuples/relpages
statistics if it skipped any pages. But this could leave us with extremely
out-of-date stats for a table that contains any unchanging areas,
especially for TOAST tables which never get processed by ANALYZE. In
particular this could result in autovacuum making poor decisions about when
to process the table, as in recent report from Florian Helmberger. And in
general it's a bad idea to not update the stats at all. Instead, use the
previous values of reltuples/relpages as an estimate of the tuple density
in unvisited pages. This approach results in a "moving average" estimate
of reltuples, which should converge to the correct value over multiple
VACUUM and ANALYZE cycles even when individual measurements aren't very
good.
This new method for updating reltuples is used by both VACUUM and ANALYZE,
with the result that we no longer need the grotty interconnections that
caused ANALYZE to not update the stats depending on what had happened
in the parent VACUUM command.
Also, fix the logic for skipping all-visible pages during VACUUM so that it
looks ahead rather than behind to decide what to do, as per a suggestion
from Greg Stark. This eliminates useless scanning of all-visible pages at
the start of the relation or just after a not-all-visible page. In
particular, the first few pages of the relation will not be invariably
included in the scanned pages, which seems to help in not overweighting
them in the reltuples estimate.
Back-patch to 8.4, where the visibility map was introduced.
This is necessary to avoid long-term memory leakage, because the main loop
in PostgresMain expects to be executing in MessageContext, and hence is a
bit sloppy about freeing stuff that is only needed for the duration of
processing the current client message. The known case of an actual leak
is when encoding conversion has to be done on the incoming command string,
but there might be others. Per report from Per-Olov Esgard.
Back-patch to 9.0, where the bug was introduced by the LISTEN/NOTIFY
rewrite.
We must lock out autovacuuming of the old toast table before computing the
OldestXmin horizon we will use. Otherwise, autovacuum could start on the
toast table later, compute a later OldestXmin horizon, and remove as DEAD
toast tuples that we still need (because we think their parent tuples are
only RECENTLY_DEAD). Per further thought about bug #5998.
Per discussion, removing the hint seems better than correcting it because
the adjacent analogous cases in RenameRelation don't have any hints, and
nobody seems to have missed 'em.
Shigeru Hanada
Per bug #5988, reported by Marko Tiikkaja, and further analyzed by Tom
Lane, the previous coding was broken in several respects: even if the
target table already existed, a subsequent CREATE TABLE IF NOT EXISTS
might try to add additional constraints or sequences-for-serial
specified in the new CREATE TABLE statement.
In passing, this also fixes a minor information leak: it's no longer
possible to figure out whether a schema to which you don't have CREATE
access contains a sequence named like "x_y_seq" by attempting to create a
table in that schema called "x" with a serial column called "y".
Some more refactoring of this code in the future might be warranted,
but that will need to wait for a later major release.
This option turns off autovacuum, prevents non-super-user connections,
and enables oid setting hooks in the backend. The code continues to use
the old autoavacuum disable settings for servers with earlier catalog
versions.
This includes a catalog version bump to identify servers that support
the -b option.
This patch is almost entirely cosmetic --- mostly cleaning up a lot of
neglected comments, and fixing code layout problems in places where the
patch made lines too long and then pgindent did weird things with that.
I did find a bug-of-omission in equalTupleDescs().
This syntax allows a standalone table to be made into a typed table,
or a typed table to be made standalone. This is possibly a mildly
useful feature in its own right, but the real motivation for this
change is that we need it to make pg_upgrade work with typed tables.
This doesn't actually fix that problem, but it's necessary
infrastructure.
Noah Misch
There can never be a need to push the indcheckxmin horizon forward, since
any HOT chains that are actually broken with respect to the index must
pre-date its original creation. So we can just avoid changing pg_index
altogether during a REINDEX operation.
This offers a cleaner solution than my previous patch for the problem
found a few days ago that we mustn't try to update pg_index while we are
reindexing it. System catalog indexes will always be created with
indcheckxmin = false during initdb, and with this modified code we should
never try to change their pg_index entries. This avoids special-casing
system catalogs as the former patch did, and should provide a performance
benefit for many cases where REINDEX formerly caused an index to be
considered unusable for a short time.
Back-patch to 8.3 to cover all versions containing HOT. Note that this
patch changes the API for index_build(), but I believe it is unlikely that
any add-on code is calling that directly.
While "UTF8" is the correct name for this encoding, existing JDBC drivers
expect that if they send "UNICODE" it will read back the same way; they
fail with an opaque "Protocol error" complaint if not. This will be fixed
in the 9.1 drivers, but until older drivers are no longer in use in the
wild, we'd better leave "UNICODE" alone. Continue to canonicalize all
other inputs. Per report from Steve Singer and subsequent discussion.
The other DDL operations that create an inheritance relationship were
checking for collation match already, but this one got missed.
Also fix comments that failed to mention collation checks.
For what seem entirely historical reasons, a bitmask "flags" argument was
recently added to reindex_relation without subsuming its existing boolean
argument into that bitmask. This seems a bit bizarre, so fold them
together.
The lock level for adding a parent table is now ShareUpdateExclusiveLock;
see commit fbcf4b92aa. This comment didn't
get updated to match, but it doesn't seem important to mention this detail
here, so rather than updating it now, just take it out.