thereby saving a visit to the metapage in most index searches/updates.
This wouldn't actually save any I/O (since in the old regime the metapage
generally stayed in cache anyway), but it does provide a useful decrease
in bufmgr traffic in high-contention scenarios. Per my recent proposal.
transaction_timestamp() (just like now()).
Also update statement_timeout() to mention it is statement arrival time
that is measured.
Catalog version updated.
when trying to locate the referent of a RECORD variable. This fixes the
'record type has not been registered' failure reported by Stefan
Kaltenbrunner about a month ago. A side effect of the way I chose to
fix it is that most variable references in join conditions will now be
properly labeled with the variable's source table name, instead of the
not-too-helpful 'outer' or 'inner' we used to use.
that apply the necessary domain constraint checks immediately. This fixes
cases where domain constraints went unchecked for statement parameters,
PL function local variables and results, etc. We can also eliminate existing
special cases for domains in places that had gotten it right, eg COPY.
Also, allow domains over domains (base of a domain is another domain type).
This almost worked before, but was disallowed because the original patch
hadn't gotten it quite right.
var_samp(), stddev_pop(), and stddev_samp(). var_samp() and stddev_samp()
are just renamings of the historical Postgres aggregates variance() and
stddev() -- the latter names have been kept for backward compatibility.
This patch includes updates for the documentation and regression tests.
The catversion has been bumped.
NB: SQL2003 requires that DISTINCT not be specified for any of these
aggregates. Per discussion on -patches, I have NOT implemented this
restriction: if the user asks for stddev(DISTINCT x), presumably they
know what they are doing.
we are doing the final merge pass on-the-fly, and not writing the data
back onto a 'tape', the number of free blocks in the tape set will become
large, leading to a lot of time wasted in ltsReleaseBlock(). There is
really no need to track the free blocks anymore in this state, so add a
simple shutoff switch. Per report from Stefan Kaltenbrunner.
- new function justify_interval(interval)
- modified function justify_hours(interval)
- modified function justify_days(interval)
These functions are defined to meet the requirements as discussed in
this thread. Specifically:
- justify_hours makes certain the sign bit on the hours
matches the sign bit on the days. It only checks the
sign bit on the days, and not the months, when
determining if the hours should be positive or negative.
After the call, -24 < hours < 24.
- justify_days makes certain the sign bit on the days
matches the sign bit on the months. It's behavior does
not depend on the hours, nor does it modify the hours.
After the call, -30 < days < 30.
- justify_interval makes sure the sign bits on all three
fields months, days, and hours are all the same. After
the call, -24 < hours < 24 AND -30 < days < 30.
Mark Dilger
creation of a shell type. This allows a less hacky way of dealing with
the mutual dependency between a datatype and its I/O functions: make a
shell type, then make the functions, then define the datatype fully.
We should fix pg_dump to handle things this way, but this commit just deals
with the backend.
Martijn van Oosterhout, with some corrections by Tom Lane.
with fixed merge order (fixed number of "tapes") was based on obsolete
assumptions, namely that tape drives are expensive. Since our "tapes"
are really just a couple of buffers, we can have a lot of them given
adequate workspace. This allows reduction of the number of merge passes
with consequent savings of I/O during large sorts.
Simon Riggs with some rework by Tom Lane
id (CVE-2006-0553). Also fix related bug in SET SESSION AUTHORIZATION that
allows unprivileged users to crash the server, if it has been compiled with
Asserts enabled. The escalation-of-privilege risk exists only in 8.1.0-8.1.2.
However, the Assert-crash risk exists in all releases back to 7.3.
Thanks to Akio Ishida for reporting this problem.
and rely exclusively on the SQL type system to tell the difference between
the types. Prevent creation of invalid CIDR values via casting from INET
or set_masklen() --- both of these operations now silently zero any bits
to the right of the netmask. Remove duplicate CIDR comparison operators,
letting the type rely on the INET operators instead.
Continue to support GRANT ON [TABLE] for sequences for backward
compatibility; issue warning for invalid sequence permissions.
[Backward compatibility warning message.]
Add USAGE permission for sequences that allows only currval() and
nextval(), not setval().
Mention object name in grant/revoke warnings because of possible
multi-object operations.
cursors. Patch from Joachim Wieland, review and ediorialization by Neil
Conway. The view lists cursors defined by DECLARE CURSOR, using SPI, or
via the Bind message of the frontend/backend protocol. This means the
view does not list the unnamed portal or the portal created to implement
EXECUTE. Because we do list SPI portals, there might be more rows in
this view than you might expect if you are using SPI implicitly (e.g.
via a procedural language).
Per recent discussion on -hackers, the query string included in the
view for cursors defined by DECLARE CURSOR is based on
debug_query_string. That means it is not accurate if multiple queries
separated by semicolons are submitted as one query string. However,
there doesn't seem a trivial fix for that: debug_query_string
is better than nothing. I also changed SPI_cursor_open() to include
the source text for the portal it creates: AFAICS there is no reason
not to do this.
Update the documentation and regression tests, bump the catversion.
access information about the prepared statements that are available
in the current session. Original patch from Joachim Wieland, various
improvements by Neil Conway.
The "statement" column of the view contains the literal query string
sent by the client, without any rewriting or pretty printing. This
means that prepared statements created via SQL will be prefixed with
"PREPARE ... AS ", whereas those prepared via the FE/BE protocol will
not. That is unfortunate, but discussion on -patches did not yield an
efficient way to improve this, and there is some merit in returning
exactly what the client sent to the backend.
Catalog version bumped, regression tests updated.
setup. This protects against undesired changes in locale behavior
if someone carelessly does setlocale(LC_ALL, "") (and we know who
you are, perl guys).
(previously we only did = and <> correctly). Also, allow row comparisons
with any operators that are in btree opclasses, not only those with these
specific names. This gets rid of a whole lot of indefensible assumptions
about the behavior of particular operators based on their names ... though
it's still true that IN and NOT IN expand to "= ANY". The patch adds a
RowCompareExpr expression node type, and makes some changes in the
representation of ANY/ALL/ROWCOMPARE SubLinks so that they can share code
with RowCompareExpr.
I have not yet done anything about making RowCompareExpr an indexable
operator, but will look at that soon.
initdb forced due to changes in stored rules.
#define HIGHBIT (0x80)
#define IS_HIGHBIT_SET(ch) ((unsigned char)(ch) & HIGHBIT)
and removed CSIGNBIT and mapped it uses to HIGHBIT. I have also added
uses for IS_HIGHBIT_SET where appropriate. This change is
purely for code clarity.
when we first read the page, rather than checking them one at a time.
This allows us to take and release the buffer content lock just once
per page, instead of once per tuple. Since it's a shared lock the
contention penalty for holding the lock longer shouldn't be too bad.
We can safely do this only when using an MVCC snapshot; else the
assumption that visibility won't change over time is uncool. Therefore
there are now two code paths depending on the snapshot type. I also
made the same change in nodeBitmapHeapscan.c, where it can be done always
because we only support MVCC snapshots for bitmap scans anyway.
Also make some incidental cleanups in the APIs of these functions.
Per a suggestion from Qingqing Zhou.
qualification when the underlying operator is indexable and useOr is true.
That is, indexkey op ANY (ARRAY[...]) is effectively translated into an
OR combination of one indexscan for each array element. This only works
for bitmap index scans, of course, since regular indexscans no longer
support OR'ing of scans. There are still some loose ends to clean up
before changing 'x IN (list)' to translate as a ScalarArrayOpExpr;
for instance predtest.c ought to be taught about it. But this gets the
basic functionality in place.
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
process of dropping roles by dropping objects owned by them and privileges
granted to them, or giving the owned objects to someone else, through the
use of the data stored in the new pg_shdepend catalog.
Some refactoring of the GRANT/REVOKE code was needed, as well as ALTER OWNER
code. Further cleanup of code duplication in the GRANT code seems necessary.
Implemented by me after an idea from Tom Lane, who also provided various kind
of implementation advice.
Regression tests pass. Some tests for the new functionality are also added,
as well as rudimentary documentation.
functionality, but I still need to make another pass looking at places
that incidentally use arrays (such as ACL manipulation) to make sure they
are null-safe. Contrib needs work too.
I have not changed the behaviors that are still under discussion about
array comparison and what to do with lower bounds.
to assume that the string pointer passed to set_ps_display is good forever.
There's no need to anyway since ps_status.c itself saves the string, and
we already had an API (get_ps_display) to return it.
I believe this explains Jim Nasby's report of intermittent crashes in
elog.c when %i format code is in use in log_line_prefix.
While at it, repair a previously unnoticed problem: on some platforms such as
Darwin, the string returned by get_ps_display was blank-padded to the maximum
length, meaning that lock.c's attempt to append " waiting" to it never worked.
create circularity of role memberships. This is a minimum-impact fix
for the problem reported by Florian Pflug. I thought about removing
the superuser_arg test from is_member_of_role() altogether, as it seems
redundant for many of the callers --- but not all, and it's way too late
in the 8.1 cycle to be making large changes. Perhaps reconsider this
later.
fix problems with replacement-string backslashes that aren't followed by
one of the expected characters, avoid giving the impression that
replace_text_regexp() is meant to be called directly as a SQL function,
etc.
the facility has been set, the facility gets set to LOCAL0 and cannot
be changed later. This seems reasonably plausible to happen, particularly
at higher debug log levels, though I am not certain it explains Han Holl's
recent report. Easiest fix is to teach the code how to change the value
on-the-fly, which is nicer anyway. I made the settings PGC_SIGHUP to
conform with log_destination.
traceable to grant options. As per my earlier proposal, a GRANT made by
a role member has to be recorded as being granted by the role that actually
holds the grant option, and not the member.
like '23:59:60' because of fractional-second roundoff problems. Trying
to control this upstream of the actual display code was hopeless; the right
way is to explicitly round fractional seconds in the display code and then
refigure the results if the fraction rounds up to 1. Per bug #1927.
generated by bitmap index scans. Along the way, simplify and speed up
the code for counting sequential and index scans; it was both confusing
and inefficient to be taking care of that in the per-tuple loops, IMHO.
initdb forced because of internal changes in pg_stat view definitions.
argument as a 'regclass' value instead of a text string. The frontend
conversion of text string to pg_class OID is now encapsulated as an
implicitly-invocable coercion from text to regclass. This provides
backwards compatibility to the old behavior when the sequence argument
is explicitly typed as 'text'. When the argument is just an unadorned
literal string, it will be taken as 'regclass', which means that the
stored representation will be an OID. This solves longstanding problems
with renaming sequences that are referenced in default expressions, as
well as new-in-8.1 problems with renaming such sequences' schemas or
moving them to another schema. All per recent discussion.
Along the way, fix some rather serious problems in dbmirror's support
for mirroring sequence operations (int4 vs int8 confusion for instance).
sake of brevity and clarity.
Make pg_reload_conf(), pg_rotate_logfile(), and pg_cancel_backend()
return a boolean rather than an integer to indicate success or failure.
Along the way, make some minor cleanups to dbsize.c -- in particular,
use elog() rather than ereport() for "shouldn't happen" error
conditions, and remove some of the more flagrant violations of the
Postgres indentation conventions.
Catalog version bumped.
Bruce Momjian
Tom Lane
Neil Conway
Alvaro Herrera