node emits only those vars that are actually needed above it in the
plan tree. (There were comments in the code suggesting that this was
done at some point in the dim past, but for a long time we have just
made join nodes emit everything that either input emitted.) Aside from
being marginally more efficient, this fixes the problem noted by Peter
Eisentraut where a join above an IN-implemented-as-join might fail,
because the subplan targetlist constructed in the latter case didn't
meet the expectation of including everything.
Along the way, fix some places that were O(N^2) in the targetlist
length. This is not all the trouble spots for wide queries by any
means, but it's a step forward.
into a UNION that has some type coercions applied to the component
queries, so long as the qual itself does not reference any columns that
have such coercions. Per example from Jonathan Bartlett 24-Apr-03.
refers to a non-DISTINCT output column of a DISTINCT ON subquery, or
if it refers to a function-returning-set, we cannot push it down.
But the old implementation refused to push down *any* quals if the
subquery had any such 'dangerous' outputs. Now we just look at the
output columns actually referenced by each qual expression. More code
than before, but probably no slower since we don't make unnecessary checks.
utility statement (DeclareCursorStmt) with a SELECT query dangling from
it, rather than a SELECT query with a few unusual fields in it. Add
code to determine whether a planned query can safely be run backwards.
If DECLARE CURSOR specifies SCROLL, ensure that the plan can be run
backwards by adding a Materialize plan node if it can't. Without SCROLL,
you get an error if you try to fetch backwards from a cursor that can't
handle it. (There is still some discussion about what the exact
behavior should be, but this is necessary infrastructure in any case.)
Along the way, make EXPLAIN DECLARE CURSOR work.
the outer query. (The implementation is a bit klugy, but it would take
nontrivial restructuring to make it nicer, which this is probably not
worth.) This avoids unnecessary sort steps in examples like
SELECT foo,count(*) FROM (SELECT ... ORDER BY foo,bar) sub GROUP BY foo
which means there is now a reasonable technique for controlling the
order of inputs to custom aggregates, even in the grouping case.
necessarily following the JOIN syntax to develop the query plan. The old
behavior is still available by setting GUC variable JOIN_COLLAPSE_LIMIT
to 1. Also create a GUC variable FROM_COLLAPSE_LIMIT to control the
similar decision about when to collapse sub-SELECT lists into their parent
lists. (This behavior existed already, but the limit was always
GEQO_THRESHOLD/2; now it's separately adjustable.)
There are two implementation techniques: the executor understands a new
JOIN_IN jointype, which emits at most one matching row per left-hand row,
or the result of the IN's sub-select can be fed through a DISTINCT filter
and then joined as an ordinary relation.
Along the way, some minor code cleanup in the optimizer; notably, break
out most of the jointree-rearrangement preprocessing in planner.c and
put it in a new file prep/prepjointree.c.
node now does its own grouping of the input rows, and has no need for a
preceding GROUP node in the plan pipeline. This allows elimination of
the misnamed tuplePerGroup option for GROUP, and actually saves more code
in nodeGroup.c than it costs in nodeAgg.c, as well as being presumably
faster. Restructure the API of query_planner so that we do not commit to
using a sorted or unsorted plan in query_planner; instead grouping_planner
makes the decision. (Right now it isn't any smarter than query_planner
was, but that will change as soon as it has the option to select a hash-
based aggregation step.) Despite all the hackery, no initdb needed since
only in-memory node types changed.
returns-set boolean field in Func and Oper nodes. This allows cleaner,
more reliable tests for expressions returning sets in the planner and
parser. For example, a WHERE clause returning a set is now detected
and complained of in the parser, not only at runtime.
some kibitzing from Tom Lane. Not everything works yet, and there's
no documentation or regression test, but let's commit this so Joe
doesn't need to cope with tracking changes in so many files ...
set-returning functions in its target list. This ensures that we
won't rewrite the query in a way that places set-returning functions
into quals (WHERE clauses). Cf. bug reports from Joe Conway.
clause being added to a particular restriction-clause list is redundant
with those already in the list. This avoids useless work at runtime,
and (perhaps more importantly) keeps the selectivity estimation routines
from generating too-small estimates of numbers of output rows.
Also some minor improvements in OPTIMIZER_DEBUG displays.
has a DISTINCT ON clause, per bug report from Anthony Wood. While at it,
improve the DISTINCT-ON-clause recognizer routine to not be fooled by out-
of-order DISTINCT lists.
WHERE (a = 1 or a = 2) and b = 42
and an index on (a,b), include the clause b = 42 in the indexquals
generated for each arm of the OR clause. Essentially this is an index-
driven conversion from CNF to DNF. Implementation is a bit klugy, but
better than not exploiting the extra quals at all ...
of costsize.c routines to pass Query root, so that costsize can figure
more things out by itself and not be so dependent on its callers to tell
it everything it needs to know. Use selectivity of hash or merge clause
to estimate number of tuples processed internally in these joins
(this is more useful than it would've been before, since eqjoinsel is
somewhat more accurate than before).
create_index_paths are not immediately discarded, but are available for
subsequent planner work. This allows avoiding redundant syscache lookups
in several places. Change interface to operator selectivity estimation
procedures to allow faster and more flexible estimation.
Initdb forced due to change of pg_proc entries for selectivity functions!
try to push restrictions on the view down into the view subquery,
so that they can become indexscan quals or what-have-you rather than
being applied at the top level of the subquery. 7.0 and before were
able to do this, though in a much klugier way, and I'd hate to have
anyone complaining that 7.1 is stupider than 7.0 ...
comparison does not consider paths different when they differ only in
uninteresting aspects of sort order. (We had a special case of this
consideration for indexscans already, but generalize it to apply to
ordered join paths too.) Be stricter about what is a canonical pathkey
to allow faster pathkey comparison. Cache canonical pathkeys and
dispersion stats for left and right sides of a RestrictInfo's clause,
to avoid repeated computation. Total speedup will depend on number of
tables in a query, but I see about 4x speedup of planning phase for
a sample seven-table query.
joins, and clean things up a good deal at the same time. Append plan node
no longer hacks on rangetable at runtime --- instead, all child tables are
given their own RT entries during planning. Concept of multiple target
tables pushed up into execMain, replacing bug-prone implementation within
nodeAppend. Planner now supports generating Append plans for inheritance
sets either at the top of the plan (the old way) or at the bottom. Expanding
at the bottom is appropriate for tables used as sources, since they may
appear inside an outer join; but we must still expand at the top when the
target of an UPDATE or DELETE is an inheritance set, because we actually need
a different targetlist and junkfilter for each target table in that case.
Fortunately a target table can't be inside an outer join... Bizarre mutual
recursion between union_planner and prepunion.c is gone --- in fact,
union_planner doesn't really have much to do with union queries anymore,
so I renamed it grouping_planner.
SQL92 semantics, including support for ALL option. All three can be used
in subqueries and views. DISTINCT and ORDER BY work now in views, too.
This rewrite fixes many problems with cross-datatype UNIONs and INSERT/SELECT
where the SELECT yields different datatypes than the INSERT needs. I did
that by making UNION subqueries and SELECT in INSERT be treated like
subselects-in-FROM, thereby allowing an extra level of targetlist where the
datatype conversions can be inserted safely.
INITDB NEEDED!
(Don't forget that an alias is required.) Views reimplemented as expanding
to subselect-in-FROM. Grouping, aggregates, DISTINCT in views actually
work now (he says optimistically). No UNION support in subselects/views
yet, but I have some ideas about that. Rule-related permissions checking
moved out of rewriter and into executor.
INITDB REQUIRED!
query representation. Note that GEQO_RELS setting is now interpreted
as the number of top-level items in the FROM list, not necessarily the
number of relations in the query. This seems appropriate since we are
only doing join-path searching over the top-level items.
That means you can now set your options in either or all of $PGDATA/configuration,
some postmaster option (--enable-fsync=off), or set a SET command. The list of
options is in backend/utils/misc/guc.c, documentation will be written post haste.
pg_options is gone, so is that pq_geqo config file. Also removed were backend -K,
-Q, and -T options (no longer applicable, although -d0 does the same as -Q).
Added to configure an --enable-syslog option.
changed all callers from TPRINTF to elog(DEBUG)
accesses versus sequential accesses, a (very crude) estimate of the
effects of caching on random page accesses, and cost to evaluate WHERE-
clause expressions. Export critical parameters for this model as SET
variables. Also, create SET variables for the planner's enable flags
(enable_seqscan, enable_indexscan, etc) so that these can be controlled
more conveniently than via PGOPTIONS.
Planner now estimates both startup cost (cost before retrieving
first tuple) and total cost of each path, so it can optimize queries
with LIMIT on a reasonable basis by interpolating between these costs.
Same facility is a win for EXISTS(...) subqueries and some other cases.
Redesign pathkey representation to achieve a major speedup in planning
(I saw as much as 5X on a 10-way join); also minor changes in planner
to reduce memory consumption by recycling discarded Path nodes and
not constructing unnecessary lists.
Minor cleanups to display more-plausible costs in some cases in
EXPLAIN output.
Initdb forced by change in interface to index cost estimation
functions.
fields in JoinPaths --- turns out that we do need that after all :-(.
Also, rearrange planner so that only one RelOptInfo is created for a
particular set of joined base relations, no matter how many different
subsets of relations it can be created from. This saves memory and
processing time compared to the old method of making a bunch of RelOptInfos
and then removing the duplicates. Clean up the jointree iteration logic;
not sure if it's better, but I sure find it more readable and plausible
now, particularly for the case of 'bushy plans'.
Bruce Momjian
Tom Lane
Peter Eisentraut