That means you can now set your options in either or all of $PGDATA/configuration,
some postmaster option (--enable-fsync=off), or set a SET command. The list of
options is in backend/utils/misc/guc.c, documentation will be written post haste.
pg_options is gone, so is that pq_geqo config file. Also removed were backend -K,
-Q, and -T options (no longer applicable, although -d0 does the same as -Q).
Added to configure an --enable-syslog option.
changed all callers from TPRINTF to elog(DEBUG)
subsequent I/O attempts fail cleanly. I'm speculating about failure
scenarios in which we do pq_close, then something in a proc_exit routine
opens a file (re-using that kernel FD number), then something else
fails and tries to write an elog message to the frontend ... message
ends up in opened file, oops. No known examples of this but it seems
like a potential hole.
some platforms --- and I also see that it is documented as not thread-
safe on HPUX and possibly other platforms. No good reason not to just
use IPPROTO_TCP constant from <netinet/in.h> instead.
all platforms, not just SCO. The operation is undefined for Unix-domain
sockets anyway. It seems SCO is not the only platform that complains
instead of treating the call as a no-op.
eliminating some wildly inconsistent coding in various parts of the
system. I set MAXPGPATH = 1024 in config.h.in. If anyone is really
convinced that there ought to be a configure-time test to set the
value, go right ahead ... but I think it's a waste of time.
When drawing up a very simple "text-drawing" of how the negotiation is done,
I realised I had done this last part (fallback) in a very stupid way. Patch
#4 fixes this, and does it in a much better way.
Included is also the simple text-drawing of how the negotiation is done.
//Magnus
can be generated in a buffer and then sent to the frontend in a single
libpq call. This solves problems with NOTICE and ERROR messages generated
in the middle of a data message or COPY OUT operation.
seem to be portable (HPUX doesn't like it, anyway). Also, clean up
StreamConnection(), which was mis-coded to assume that the address
family field is already set when it's called.
Here's another patch for the libpq backend areas. This patch removes all
usage of "FILE *" on the communications channel. It also cleans up the
comments and headers in the pqcomm.c file - a lot of things were either
missing or incorrect. Finally, it removes a couple of unused functions
(leftovers from the time of shared code between the libpq backend and
frontend).
Here is a first patch to cleanup the backend side of libpq.
This patch removes all external dependencies on the "Pfin" and "Pfout" that
are declared in pqcomm.h. These variables are also changed to "static" to
make sure.
Almost all the change is in the handler of the "copy" command - most other
areas of the backend already used the correct functions.
This change will make the way for cleanup of the internal stuff there - now
that all the functions accessing the file descriptors are confined to a
single directory.
fail to consume the rest of the input string, and worse it would write
one more byte than it should into the buffer, probably resulting in coredump.
Fortunately there's a correct implementation next door in pqcomprim.c.
Here are patches needed to complie under AIX 4.2.
I changed configure.in, pqcomm.c, config.h.in, and fe-connect.c.
Also I had to install flex because lex did not want to translate pgc.l.
and make backend/libpq/pqcomm.c only try to lock the socket file when
the call exists. Also, change open-RDONLY to open-WRONLY; at least
on my platform, you can't get a write lock on a file you didn't open
for writing.
> socket-flock.patch
>
> use advisory locks to check if the unix socket can be deleted.
> A running postmaster keeps a lock on that file. A starting
> postmaster exits if the file exists and is locked, otherwise
> it deletes the sockets and proceeds.
> This avoid the need to remove manually the file after a postmaster
> or system crash.
> I don't know if flock is available on any system. If not we could
> define a HAVE_FLOCK set by configure.
As Bruce mentioned, this is due to the conflict among changes we made.
Included patches should fix the problem(I changed all MB to
MULTIBYTE). Please let me know if you have further problem.
P.S. I did not include pathces to configure and gram.c to save the
file size(configure.in and gram.y modified).
Making PQrequestCancel safe to call in a signal handler turned out to be
much easier than I feared. So here are the diffs.
Some notes:
* I modified the postmaster's packet "iodone" callback interface to allow
the callback routine to return a continue-or-drop-connection return
code; this was necessary to allow the connection to be closed after
receiving a Cancel, rather than proceeding to launch a new backend...
Being a neatnik, I also made the iodone proc have a typechecked
parameter list.
* I deleted all code I could find that had to do with OOB.
* I made some edits to ensure that all signals mentioned in the code
are referred to symbolically not by numbers ("SIGUSR2" not "2").
I think Bruce may have already done at least some of the same edits;
I hope that merging these patches is not too painful.
I have implemented a framework of encoding translation between the
backend and the frontend. Also I have added a new variable setting
command:
SET CLIENT_ENCODING TO 'encoding';
Other features include:
Latin1 support more 8 bit cleaness
See doc/README.mb for more details. Note that the pacthes are
against May 30 snapshot.
Tatsuo Ishii
I've completed the patch to fix the protocol and authentication issues I
was discussing a couple of weeks ago. The particular changes are:
- the protocol has a version number
- network byte order is used throughout
- the pg_hba.conf file is used to specify what method is used to
authenticate a frontend (either password, ident, trust, reject, krb4
or krb5)
- support for multiplexed backends is removed
- appropriate changes to man pages
- the -a switch to many programs to specify an authentication service
no longer has any effect
- the libpq.so version number has changed to 1.1
The new backend still supports the old protocol so old interfaces won't
break.
Subject: [PATCHES] 970417: two more patches for large objects
Here are two more patches:
1. pg_getint doesn't properly set the status flag when
calling pqGetShort or pqGetLong. This is required when
accessing large objects via libpq. This, combined with
problem 1 above causes postgres to crash when postgres
tries to print out the message that the status was not
good.
2. ExceptionalCondition crashes when called with detail =
NULL. This patch prevents dereferencing the NULL.
Subject: [HACKERS] libpq/pqcomm stuff and Solaris byte order
I decided to go ahead with the required changes since no one else seems
to. I don't guarantee that it is perfect but with these changes the
package actually compiles. While I was at it I added to the Sparc
Solaris header to define the byte order. Note that NetBSD sets this
in the system headers so it wasn't required there.
In particular, someone may want to check whether I removed the correct
84 lines from backend/libpq/pqcomprim.c.
of common routines in pqcomprim.c (pq communication primitives).
Not all adapted to it yet, but it's a start.
- Rewritten some of those routines, to write/read bigger chunks of
data, precomputing stuff in buffers instead of sending out byte
by byte.
- As a consequence, I need to know the endianness of the machine.
Currently I rely on getting it from machine/endian.h, but this
may not be available everywhere? (Who the hell thought it was
a good idea to pass integers to the backend the other way around
than the normal network byte order? *argl*)
- Libpq looks in the environment for magic variables, and upon
establishing a connection to the backend, sends it queries
of the form "SET var_name TO 'var_value'". This needs a change
in the backend parser (Mr. Parser, are you there? :)
- Currently it looks for two Env-Vars, namely PG_DATEFORMAT
and PG_FLOATFORMAT. What else makes sense? PG_TIMEFORMAT?
PG_TIMEZONE?
From: "Martin J. Laubach" <mjl@wwx.vip.at>
Subject: [HACKERS] password authentication
This patch adds support for plaintext password authentication. To use
it, you add a line like
host all 0.0.0.0 0.0.0.0 password pg_pwd.conf
to your pg_hba.conf, where 'pg_pwd.conf' is the name of a file containing
the usernames and password hashes in the format of the first two fields
of a Unix /etc/passwd file. (Of course, you can use a specific database
name or IP instead.)
Then, to connect with a password through libpq, you use the PQconnectdb()
function, specifying the "password=" tag in the connect string and also
adding the tag "authtype=password".
I also added a command-line switch '-u' to psql that tells it to prompt
for a username and password and use password authentication.
In particular, no more compiled-in default for PGDATA or LIBDIR. Commands
that need them need either invocation options or environment variables.
PGPORT default is hardcoded as 5432, but overrideable with options or
environment variables.
