foreign_grouping_ok() is willing to put fairly arbitrary expressions into
the targetlist of a remote SELECT that's doing grouping or aggregation on
the remote side, including expressions that have no foreign component to
them at all. This is possibly a bit dubious from an efficiency standpoint;
but it rises to the level of a crash-causing bug if the expression is just
a Param or non-foreign Var. In that case, the expression will necessarily
also appear in the fdw_exprs list of values we need to send to the remote
server, and then setrefs.c's set_foreignscan_references will mistakenly
replace the fdw_exprs entry with a Var referencing the targetlist result.
The root cause of this problem is bad design in commit e7cb7ee14: it put
logic into set_foreignscan_references that IMV is postgres_fdw-specific,
and yet this bug shows that it isn't postgres_fdw-specific enough. The
transformation being done on fdw_exprs assumes that fdw_exprs is to be
evaluated with the fdw_scan_tlist as input, which is not how postgres_fdw
uses it; yet it could be the right thing for some other FDW. (In the
bigger picture, setrefs.c has no business assuming this for the other
expression fields of a ForeignScan either.)
The right fix therefore would be to expand the FDW API so that the
FDW could inform setrefs.c how it intends to evaluate these various
expressions. We can't change that in the back branches though, and we
also can't just summarily change setrefs.c's behavior there, or we're
likely to break external FDWs.
As a stopgap, therefore, hack up postgres_fdw so that it won't attempt
to send targetlist entries that look exactly like the fdw_exprs entries
they'd produce. In most cases this actually produces a superior plan,
IMO, with less data needing to be transmitted and returned; so we probably
ought to think harder about whether we should ship tlist expressions at
all when they don't contain any foreign Vars or Aggs. But that's an
optimization not a bug fix so I left it for later. One case where this
produces an inferior plan is where the expression in question is actually
a GROUP BY expression: then the restriction prevents us from using remote
grouping. It might be possible to work around that (since that would
reduce to group-by-a-constant on the remote side); but it seems like a
pretty unlikely corner case, so I'm not sure it's worth expending effort
solely to improve that. In any case the right long-term answer is to fix
the API as sketched above, and then revert this hack.
Per bug #15781 from Sean Johnston. Back-patch to v10 where the problem
was introduced.
Discussion: https://postgr.es/m/15781-2601b1002bad087c@postgresql.org
Commit 3d956d9562 added support for update row movement in postgres_fdw.
This patch fixes the following issues introduced by that commit:
* When a remote partition chosen to insert routed rows into was also an
UPDATE subplan target rel that would be updated later, the UPDATE that
used a direct modification plan modified those routed rows incorrectly
because those routed rows were visible to the later UPDATE command.
The right fix for this would be to have some way in postgres_fdw in
which the later UPDATE command ignores those routed rows, but it seems
hard to do so with the current infrastructure. For now throw an error
in that case.
* When a remote partition chosen to insert routed rows into was also an
UPDATE subplan target rel, fmstate created for the UPDATE that used a
non-direct modification plan was mistakenly overridden by another
fmstate created for inserting those routed rows into the partition.
This caused 1) server crash when the partition would be updated later,
and 2) resource leak when the partition had been already updated. To
avoid that, adjust the treatment of the fmstate for the inserting. As
for #1, since we would also have the incorrectness issue as mentioned
above, error out in that case as well.
Update the docs to mention that postgres_fdw currently does not handle
the case where a remote partition chosen to insert a routed row into is
also an UPDATE subplan target rel that will be updated later.
Author: Amit Langote and Etsuro Fujita
Reviewed-by: Amit Langote
Backpatch-through: 11 where row movement in postgres_fdw was added
Discussion: https://postgr.es/m/21e7eaa4-0d4d-20c2-a1f7-c7e96f4ce440@lab.ntt.co.jp
Similarly to the set of parameters for keepalive, a connection parameter
for libpq is added as well as a backend GUC, called tcp_user_timeout.
Increasing the TCP user timeout is useful to allow a connection to
survive extended periods without end-to-end connection, and decreasing
it allows application to fail faster. By default, the parameter is 0,
which makes the connection use the system default, and follows a logic
close to the keepalive parameters in its handling. When connecting
through a Unix-socket domain, the parameters have no effect.
Author: Ryohei Nagaura
Reviewed-by: Fabien Coelho, Robert Haas, Kyotaro Horiguchi, Kirk
Jamison, Mikalai Keida, Takayuki Tsunakawa, Andrei Yahorau
Discussion: https://postgr.es/m/EDA4195584F5064680D8130B1CA91C45367328@G01JPEXMBYT04
The upper-planner pathification allows FDWs to arrange to push down
different types of upper-stage operations to the remote side. This
commit teaches postgres_fdw to do it for the (FINAL, NULL) upperrel,
which is responsible for doing LockRows, LIMIT, and/or ModifyTable.
This provides the ability for postgres_fdw to handle SELECT commands
so that it 1) skips the LockRows step (if any) (note that this is
safe since it performs early locking) and 2) pushes down the LIMIT
and/or OFFSET restrictions (if any) to the remote side. This doesn't
handle the INSERT/UPDATE/DELETE cases.
Author: Etsuro Fujita
Reviewed-By: Antonin Houska and Jeff Janes
Discussion: https://postgr.es/m/87pnz1aby9.fsf@news-spur.riddles.org.uk
The upper-planner pathification allows FDWs to arrange to push down
different types of upper-stage operations to the remote side. This
commit teaches postgres_fdw to do it for the (ORDERED, NULL) upperrel,
which is responsible for evaluating the query's ORDER BY ordering.
Since postgres_fdw is already able to evaluate that ordering remotely
for foreign baserels and foreign joinrels (see commit aa09cd242f et al.),
this adds support for that for foreign grouping relations.
Author: Etsuro Fujita
Reviewed-By: Antonin Houska and Jeff Janes
Discussion: https://postgr.es/m/87pnz1aby9.fsf@news-spur.riddles.org.uk
Previously, the planner created RangeTblEntry and RelOptInfo structs
for every partition of a partitioned table, even though many of them
might later be deemed uninteresting thanks to partition pruning logic.
This incurred significant overhead when there are many partitions.
Arrange to postpone creation of these data structures until after
we've processed the query enough to identify restriction quals for
the partitioned table, and then apply partition pruning before not
after creation of each partition's data structures. In this way
we need not open the partition relations at all for partitions that
the planner has no real interest in.
For queries that can be proven at plan time to access only a small
number of partitions, this patch improves the practical maximum
number of partitions from under 100 to perhaps a few thousand.
Amit Langote, reviewed at various times by Dilip Kumar, Jesper Pedersen,
Yoshikazu Imai, and David Rowley
Discussion: https://postgr.es/m/9d7c5112-cb99-6a47-d3be-cf1ee6862a1d@lab.ntt.co.jp
This is an SQL-standard feature that allows creating columns that are
computed from expressions rather than assigned, similar to a view or
materialized view but on a column basis.
This implements one kind of generated column: stored (computed on
write). Another kind, virtual (computed on read), is planned for the
future, and some room is left for it.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/b151f851-4019-bdb1-699e-ebab07d2f40a@2ndquadrant.com
We've been creating duplicate RTEs for partitioned tables just
because we do so for regular inheritance parent tables. But unlike
regular-inheritance parents which are themselves regular tables
and thus need to be scanned, partitioned tables don't need the
extra RTE.
This makes the conditions for building a child RTE the same as those
for building an AppendRelInfo, allowing minor simplification in
expand_single_inheritance_child. Since the planner's actual processing
is driven off the AppendRelInfo list, nothing much changes beyond that,
we just have one fewer useless RTE entry.
Amit Langote, reviewed and hacked a bit by me
Discussion: https://postgr.es/m/9d7c5112-cb99-6a47-d3be-cf1ee6862a1d@lab.ntt.co.jp
If there's only one child relation, the Append or MergeAppend isn't
doing anything useful, and can be elided. It does have a purpose
during planning though, which is to serve as a buffer between parent
and child Var numbering. Therefore we keep it all the way through
to setrefs.c, and get rid of it only after fixing references in the
plan level(s) above it. This works largely the same as setrefs.c's
ancient hack to get rid of no-op SubqueryScan nodes, and can even
share some code with that.
Note the change to make setrefs.c use apply_tlist_labeling rather than
ad-hoc code. This has the effect of propagating the child's resjunk
and ressortgroupref labels, which formerly weren't propagated when
removing a SubqueryScan. Doing that is demonstrably necessary for
the [Merge]Append cases, and seems harmless for SubqueryScan, if only
because trivial_subqueryscan is afraid to collapse cases where the
resjunk marking differs. (I suspect that restriction could now be
removed, though it's unclear that it'd make any new matches possible,
since the outer query can't have references to a child resjunk column.)
David Rowley, reviewed by Alvaro Herrera and Tomas Vondra
Discussion: https://postgr.es/m/CAKJS1f_7u8ATyJ1JGTMHFoKDvZdeF-iEBhs+sM_SXowOr9cArg@mail.gmail.com
Historically we've always materialized the full output of a CTE query,
treating WITH as an optimization fence (so that, for example, restrictions
from the outer query cannot be pushed into it). This is appropriate when
the CTE query is INSERT/UPDATE/DELETE, or is recursive; but when the CTE
query is non-recursive and side-effect-free, there's no hazard of changing
the query results by pushing restrictions down.
Another argument for materialization is that it can avoid duplicate
computation of an expensive WITH query --- but that only applies if
the WITH query is called more than once in the outer query. Even then
it could still be a net loss, if each call has restrictions that
would allow just a small part of the WITH query to be computed.
Hence, let's change the behavior for WITH queries that are non-recursive
and side-effect-free. By default, we will inline them into the outer
query (removing the optimization fence) if they are called just once.
If they are called more than once, we will keep the old behavior by
default, but the user can override this and force inlining by specifying
NOT MATERIALIZED. Lastly, the user can force the old behavior by
specifying MATERIALIZED; this would mainly be useful when the query had
deliberately been employing WITH as an optimization fence to prevent a
poor choice of plan.
Andreas Karlsson, Andrew Gierth, David Fetter
Discussion: https://postgr.es/m/87sh48ffhb.fsf@news-spur.riddles.org.uk
Up to now postgres_fdw has been using create_foreignscan_path() to
generate not only base-relation paths, but also paths for foreign joins
and foreign upperrels. This is wrong, because create_foreignscan_path()
calls get_baserel_parampathinfo() which will only do the right thing for
baserels. It accidentally fails to fail for unparameterized paths, which
are the only ones postgres_fdw (thought it) was handling, but we really
need different APIs for the baserel and join cases.
In HEAD, the best thing to do seems to be to split up the baserel,
joinrel, and upperrel cases into three functions so that they can
have different APIs. I haven't actually given create_foreign_join_path
a different API in this commit: we should spend a bit of time thinking
about just what we want to do there, since perhaps FDWs would want to
do something different from the build-up-a-join-pairwise approach that
get_joinrel_parampathinfo expects. In the meantime, since postgres_fdw
isn't prepared to generate parameterized joins anyway, just give it a
defense against trying to plan joins with lateral refs.
In addition (and this is what triggered this whole mess) fix bug #15613
from Srinivasan S A, by teaching file_fdw and postgres_fdw that plain
baserel foreign paths still have outer refs if the relation has
lateral_relids. Add some assertions in relnode.c to catch future
occurrences of the same error --- in particular, to catch other FDWs
doing that, but also as backstop against core-code mistakes like the
one fixed by commit bdd9a99aa.
Bug #15613 also needs to be fixed in the back branches, but the
appropriate fix will look quite a bit different there, since we don't
want to assume that existing FDWs get the word right away.
Discussion: https://postgr.es/m/15613-092be1be9576c728@postgresql.org
The fact that "SELECT expression" has no base relations has long been a
thorn in the side of the planner. It makes it hard to flatten a sub-query
that looks like that, or is a trivial VALUES() item, because the planner
generally uses relid sets to identify sub-relations, and such a sub-query
would have an empty relid set if we flattened it. prepjointree.c contains
some baroque logic that works around this in certain special cases --- but
there is a much better answer. We can replace an empty FROM clause with a
dummy RTE that acts like a table of one row and no columns, and then there
are no such corner cases to worry about. Instead we need some logic to
get rid of useless dummy RTEs, but that's simpler and covers more cases
than what was there before.
For really trivial cases, where the query is just "SELECT expression" and
nothing else, there's a hazard that adding the extra RTE makes for a
noticeable slowdown; even though it's not much processing, there's not
that much for the planner to do overall. However testing says that the
penalty is very small, close to the noise level. In more complex queries,
this is able to find optimizations that we could not find before.
The new RTE type is called RTE_RESULT, since the "scan" plan type it
gives rise to is a Result node (the same plan we produced for a "SELECT
expression" query before). To avoid confusion, rename the old ResultPath
path type to GroupResultPath, reflecting that it's only used in degenerate
grouping cases where we know the query produces just one grouped row.
(It wouldn't work to unify the two cases, because there are different
rules about where the associated quals live during query_planner.)
Note: although this touches readfuncs.c, I don't think a catversion
bump is required, because the added case can't occur in stored rules,
only plans.
Patch by me, reviewed by David Rowley and Mark Dilger
Discussion: https://postgr.es/m/15944.1521127664@sss.pgh.pa.us
COPY can skip writing WAL when loading data on a table which has been
created in the same transaction as the one loading the data, however
this cannot work on views or foreign table as this would result in
trying to flush relation files which do not exist. So disable the
optimization so as commands are able to work the same way with any
configuration of wal_level.
Tests are added to cover the different cases, which need to have
wal_level set to minimal to allow the problem to show up, and that is
not the default configuration.
Reported-by: Luis M. Carril, Etsuro Fujita
Author: Amit Langote, Michael Paquier
Reviewed-by: Etsuro Fujita
Discussion: https://postgr.es/m/15552-c64aa14c5c22f63c@postgresql.org
Backpatch-through: 10, where support for COPY on views has been added,
while v11 has added support for COPY on foreign tables.
postgres_fdw's postgresGetForeignPlan() assumes without checking that the
outer_plan it's given for a join relation must have a NestLoop, MergeJoin,
or HashJoin node at the top. That's been wrong at least since commit
4bbf6edfb (which could cause insertion of a Sort node on top) and it seems
like a pretty unsafe thing to Just Assume even without that.
Through blind good fortune, this doesn't seem to have any worse
consequences today than strange EXPLAIN output, but it's clearly trouble
waiting to happen.
To fix, test the node type explicitly before touching Join-specific
fields, and avoid jamming the new tlist into a node type that can't
do projection. Export a new support function from createplan.c
to avoid building low-level knowledge about the latter into FDWs.
Back-patch to 9.6 where the faulty coding was added. Note that the
associated regression test cases don't show any changes before v11,
apparently because the tests back-patched with 4bbf6edfb don't actually
exercise the problem case before then (there's no top-level Sort
in those plans).
Discussion: https://postgr.es/m/8946.1544644803@sss.pgh.pa.us
In commit 7012b132d0, which added aggregate
pushdown to postgres_fdw, we didn't account for the evaluation cost and the
selectivity of HAVING quals attached to ForeignPaths performing aggregate
pushdown, as core had never accounted for that for AggPaths and GroupPaths.
And we didn't set these values of the locally-checked quals (ie, fpinfo's
local_conds_cost and local_conds_sel), which were initialized to zeros, but
since estimate_path_cost_size factors in these to estimate the result size
and the evaluation cost of such a ForeignPath when the use_remote_estimate
option is enabled, this caused it to produce underestimated results in that
case.
By commit 7b6c075471 core was changed so that
it accounts for the evaluation cost and the selectivity of HAVING quals in
aggregation paths, so change the postgres_fdw's aggregate pushdown code as
well as such. This not only fixes the underestimation issue mentioned
above, but improves the estimation using local statistics in that function
when that option is disabled.
This would be a bug fix rather than an improvement, but apply it to HEAD
only to avoid destabilizing existing plan choices.
Author: Etsuro Fujita
Discussion: https://postgr.es/m/5BFD3EAD.2060301%40lab.ntt.co.jp
Previously tables declared WITH OIDS, including a significant fraction
of the catalog tables, stored the oid column not as a normal column,
but as part of the tuple header.
This special column was not shown by default, which was somewhat odd,
as it's often (consider e.g. pg_class.oid) one of the more important
parts of a row. Neither pg_dump nor COPY included the contents of the
oid column by default.
The fact that the oid column was not an ordinary column necessitated a
significant amount of special case code to support oid columns. That
already was painful for the existing, but upcoming work aiming to make
table storage pluggable, would have required expanding and duplicating
that "specialness" significantly.
WITH OIDS has been deprecated since 2005 (commit ff02d0a05280e0).
Remove it.
Removing includes:
- CREATE TABLE and ALTER TABLE syntax for declaring the table to be
WITH OIDS has been removed (WITH (oids[ = true]) will error out)
- pg_dump does not support dumping tables declared WITH OIDS and will
issue a warning when dumping one (and ignore the oid column).
- restoring an pg_dump archive with pg_restore will warn when
restoring a table with oid contents (and ignore the oid column)
- COPY will refuse to load binary dump that includes oids.
- pg_upgrade will error out when encountering tables declared WITH
OIDS, they have to be altered to remove the oid column first.
- Functionality to access the oid of the last inserted row (like
plpgsql's RESULT_OID, spi's SPI_lastoid, ...) has been removed.
The syntax for declaring a table WITHOUT OIDS (or WITH (oids = false)
for CREATE TABLE) is still supported. While that requires a bit of
support code, it seems unnecessary to break applications / dumps that
do not use oids, and are explicit about not using them.
The biggest user of WITH OID columns was postgres' catalog. This
commit changes all 'magic' oid columns to be columns that are normally
declared and stored. To reduce unnecessary query breakage all the
newly added columns are still named 'oid', even if a table's column
naming scheme would indicate 'reloid' or such. This obviously
requires adapting a lot code, mostly replacing oid access via
HeapTupleGetOid() with access to the underlying Form_pg_*->oid column.
The bootstrap process now assigns oids for all oid columns in
genbki.pl that do not have an explicit value (starting at the largest
oid previously used), only oids assigned later by oids will be above
FirstBootstrapObjectId. As the oid column now is a normal column the
special bootstrap syntax for oids has been removed.
Oids are not automatically assigned during insertion anymore, all
backend code explicitly assigns oids with GetNewOidWithIndex(). For
the rare case that insertions into the catalog via SQL are called for
the new pg_nextoid() function can be used (which only works on catalog
tables).
The fact that oid columns on system tables are now normal columns
means that they will be included in the set of columns expanded
by * (i.e. SELECT * FROM pg_class will now include the table's oid,
previously it did not). It'd not technically be hard to hide oid
column by default, but that'd mean confusing behavior would either
have to be carried forward forever, or it'd cause breakage down the
line.
While it's not unlikely that further adjustments are needed, the
scope/invasiveness of the patch makes it worthwhile to get merge this
now. It's painful to maintain externally, too complicated to commit
after the code code freeze, and a dependency of a number of other
patches.
Catversion bump, for obvious reasons.
Author: Andres Freund, with contributions by John Naylor
Discussion: https://postgr.es/m/20180930034810.ywp2c7awz7opzcfr@alap3.anarazel.de
Commit f49842d, which added support for partitionwise joins, built the
child's tlist by applying adjust_appendrel_attrs() to the parent's. So in
the case where the parent's included a whole-row Var for the parent, the
child's contained a ConvertRowtypeExpr. To cope with that, that commit
added code to the planner, such as setrefs.c, but some code paths still
assumed that the tlist for a scan (or join) rel would only include Vars
and PlaceHolderVars, which was true before that commit, causing errors:
* When creating an explicit sort node for an input path for a mergejoin
path for a child join, prepare_sort_from_pathkeys() threw the 'could not
find pathkey item to sort' error.
* When deparsing a relation participating in a pushed down child join as a
subquery in contrib/postgres_fdw, get_relation_column_alias_ids() threw
the 'unexpected expression in subquery output' error.
* When performing set_plan_references() on a local join plan generated by
contrib/postgres_fdw for EvalPlanQual support for a pushed down child
join, fix_join_expr() threw the 'variable not found in subplan target
lists' error.
To fix these, two approaches have been proposed: one by Ashutosh Bapat and
one by me. While the former keeps building the child's tlist with a
ConvertRowtypeExpr, the latter builds it with a whole-row Var for the
child not to violate the planner assumption, and tries to fix it up later,
But both approaches need more work, so refuse to generate partitionwise
join paths when whole-row Vars are involved, instead. We don't need to
handle ConvertRowtypeExprs in the child's tlists for now, so this commit
also removes the changes to the planner.
Previously, partitionwise join computed attr_needed data for each child
separately, and built the child join's tlist using that data, which also
required an extra step for adding PlaceHolderVars to that tlist, but it
would be more efficient to build it from the parent join's tlist through
the adjust_appendrel_attrs() transformation. So this commit builds that
list that way, and simplifies build_joinrel_tlist() and placeholder.c as
well as part of set_append_rel_size() to basically what they were before
partitionwise join went in.
Back-patch to PG11 where partitionwise join was introduced.
Report by Rajkumar Raghuwanshi. Analysis by Ashutosh Bapat, who also
provided some of regression tests. Patch by me, reviewed by Robert Haas.
Discussion: https://postgr.es/m/CAKcux6ktu-8tefLWtQuuZBYFaZA83vUzuRd7c1YHC-yEWyYFpg@mail.gmail.com
Previously a lot of the error messages referenced the type in the
error message itself. That requires that the message is translated
separately for each type.
Note that currently a few smallint cases continue to reference the
integer, rather than smallint, type. A later patch will create a
separate routine for 16bit input.
Author: Andres Freund
Discussion: https://postgr.es/m/20180707200158.wpqkd7rjr4jxq5g7@alap3.anarazel.de
In final_cost_hashjoin(), commit 9c7f5229a allowed inner_unique cases
to follow a code path previously used only for SEMI/ANTI joins; but it
neglected to fix an if-test within that path that assumed SEMI and ANTI
were the only possible cases. This resulted in a wrong value for
hashjointuples, and an ensuing bad cost estimate, for inner_unique normal
joins. Fortunately, for inner_unique normal joins we can assume the number
of joined tuples is the same as for a SEMI join; so there's no need for
more code, we just have to invert the test to check for ANTI not SEMI.
It turns out that in two contrib tests in which commit 9c7f5229a
changed the plan expected for a query, the change was actually wrong
and induced by this estimation error, not by any real improvement.
Hence this patch also reverts those changes.
Per report from RK Korlapati. Backpatch to v10 where the error was
introduced.
David Rowley
Discussion: https://postgr.es/m/CA+SNy03bhq0fodsfOkeWDCreNjJVjsdHwUsb7AG=jpe0PtZc_g@mail.gmail.com
If a view references a foreign table, and the foreign table has a
BEFORE INSERT trigger, then it's possible for a tuple inserted or
updated through the view to be changed such that it violates the
view's WITH CHECK OPTION constraint.
Before this commit, postgres_fdw handled this case inconsistently. A
RETURNING clause on the INSERT or UPDATE statement targeting the view
would cause the finally-inserted tuple to be read back, and the WITH
CHECK OPTION violation would throw an error. But without a RETURNING
clause, postgres_fdw would not read the final tuple back, and WITH
CHECK OPTION would not throw an error for the violation (or may throw
an error when there is no real violation). AFTER ROW triggers on the
foreign table had a similar effect as a RETURNING clause on the INSERT
or UPDATE statement.
To fix, this commit retrieves the attributes needed to enforce the
WITH CHECK OPTION constraint along with the attributes needed for the
RETURNING clause (if any) from the remote side. Thus, the WITH CHECK
OPTION constraint is always evaluated against the final tuple after
any triggers on the remote side.
This fix may be considered inconsistent with CHECK constraints
declared on foreign tables, which are not enforced locally at all
(because the constraint is on a remote object). The discussion
concluded that this difference is reasonable, because the WITH CHECK
OPTION is a constraint on the local view (not any remote object);
therefore it only makes sense to enforce its WITH CHECK OPTION
constraint locally.
Author: Etsuro Fujita
Reviewed-by: Arthur Zakirov, Stephen Frost
Discussion: https://www.postgresql.org/message-id/7eb58fab-fd3b-781b-ac33-f7cfec96021f%40lab.ntt.co.jp
Print columns as "column C of <relation>" rather than "<relation> column
C". This seems to read noticeably better in English, as evidenced by the
regression test output changes, and the code change also makes it possible
for translators to adjust the phrase order in other languages.
Also change the output for OCLASS_DEFAULT from "default for %s" to
"default value for %s". This seems to read better and is also more
consistent with the output of, for instance, getObjectTypeDescription().
Kyotaro Horiguchi, per a complaint from me
Discussion: https://postgr.es/m/20180522.182020.114074746.horiguchi.kyotaro@lab.ntt.co.jp
Previously, we passed the toplevel PlannerInfo, but we actually want
to pass the relevant subroot. One problem with passing the toplevel
PlannerInfo is that the FDW which wants to push down an UPDATE or
DELETE against a join won't find the relevant joinrel there.
As of commit 1bc0100d27, postgres_fdw
tries to do exactly this and can be made to fail an assertion as a
result.
It's possible that this should be regarded as a bug fix and
back-patched to earlier releases, but for lack of a test case that
fails in earlier releases, no back-patch for now.
Etsuro Fujita, reviewed by Amit Langote.
Discussion: http://postgr.es/m/5AF43E02.30000@lab.ntt.co.jp
Without these fixes, changes to the inserted tuple made by remote
triggers are ignored when building local RETURNING tuples.
In the core code, call ExecInitRoutingInfo at a later point from
within ExecInitPartitionInfo so that the FDW callback gets invoked
after the returning list has been built. But move CheckValidResultRel
out of ExecInitRoutingInfo so that it can happen at an earlier stage.
In postgres_fdw, refactor assorted deparsing functions to work with
the RTE rather than the PlannerInfo, which saves us having to
construct a fake PlannerInfo in cases where we don't have a real one.
Then, we can pass down a constructed RTE that yields the correct
deparse result when no real one exists. Unfortunately, this
necessitates a hack that understands how the core code manages RT
indexes for update tuple routing, which is ugly, but we don't have a
better idea right now.
Original report, analysis, and patch by Etsuro Fujita. Heavily
refactored by me. Then worked over some more by Amit Langote.
Discussion: http://postgr.es/m/5AD4882B.10002@lab.ntt.co.jp
We've made multiple attempts to stabilize the plans shown by commit
1bc0100d2, with little success so far. The reason for the remaining
instability seems to be that if a transaction (such as auto-analyze)
is running concurrently with the test, then get_actual_variable_range may
return a maximum value for "T 1"."C 1" that's far away from the actual max,
as a result of our having transiently inserted such a value earlier in
the test. Because we use a non-MVCC snapshot to fetch the value (for
performance reasons), the presence of other transactions can cause that
function to return entries that are actually dead.
To fix, use a less extreme value in the earlier transient insertion, so
that whether it is visible or not won't affect the selectivity estimate.
The use of 9999 there seems to have been picked with the aid of a
dartboard anyway, rather than having a specific reason.
Discussion: https://postgr.es/m/16962.1523551784@sss.pgh.pa.us
Also enable this for postgres_fdw.
Etsuro Fujita, based on an earlier patch by Amit Langote. The larger
patch series of which this is a part has been reviewed by Amit
Langote, David Fetter, Maksim Milyutin, Álvaro Herrera, Stephen Frost,
and me. Minor documentation changes to the final version by me.
Discussion: http://postgr.es/m/29906a26-da12-8c86-4fb9-d8f88442f2b9@lab.ntt.co.jp
Since commit 7012b132d0, postgres_fdw
has been able to push down the toplevel aggregation operation to the
remote server. Commit e2f1eb0ee3 made
it possible to break down the toplevel aggregation into one
aggregate per partition. This commit lets postgres_fdw push down
aggregation in that case just as it does at the top level.
In order to make this work, this commit adds an additional argument
to the GetForeignUpperPaths FDW API. A matching argument is added
to the signature for create_upper_paths_hook. Third-party code using
either of these will need to be updated.
Also adjust create_foreignscan_plan() so that it picks up the correct
set of relids in this case.
Jeevan Chalke, reviewed by Ashutosh Bapat and by me and with some
adjustments by me. The larger patch series of which this patch is a
part was also reviewed and tested by Antonin Houska, Rajkumar
Raghuwanshi, David Rowley, Dilip Kumar, Konstantin Knizhnik, Pascal
Legrand, and Rafia Sabih.
Discussion: http://postgr.es/m/CAM2+6=V64_xhstVHie0Rz=KPEQnLJMZt_e314P0jaT_oJ9MR8A@mail.gmail.com
Discussion: http://postgr.es/m/CAM2+6=XPWujjmj5zUaBTGDoB38CemwcPmjkRy0qOcsQj_V+2sQ@mail.gmail.com
If the toplevel scan/join target list is parallel-safe, postpone
generating Gather (or Gather Merge) paths until after the toplevel has
been adjusted to return it. This (correctly) makes queries with
expensive functions in the target list more likely to choose a
parallel plan, since the cost of the plan now reflects the fact that
the evaluation will happen in the workers rather than the leader.
The original complaint about this problem was from Jeff Janes.
If the toplevel scan/join relation is partitioned, recursively apply
the changes to all partitions. This sometimes allows us to get rid of
Result nodes, because Append is not projection-capable but its
children may be. It also cleans up what appears to be incorrect SRF
handling from commit e2f1eb0ee3: the old
code had no knowledge of SRFs for child scan/join rels.
Because we now use create_projection_path() in some cases where we
formerly used apply_projection_to_path(), this changes the ordering
of columns in some queries generated by postgres_fdw. Update
regression outputs accordingly.
Patch by me, reviewed by Amit Kapila and by Ashutosh Bapat. Other
fixes for this problem (substantially different from this version)
were reviewed by Dilip Kumar, Amit Khandekar, and Marina Polyakova.
Discussion: http://postgr.es/m/CAMkU=1ycXNipvhWuweUVpKuyu6SpNjF=yHWu4c4US5JgVGxtZQ@mail.gmail.com
Per the project style guide, details and hints should have leading
capitalization and end with a period. On the other hand, errcontext should
not be capitalized and should not end with a period. To support well
formatted error contexts in dblink, extend dblink_res_error() to take a
format+arguments rather than a hardcoded string.
Daniel Gustafsson
Discussion: https://postgr.es/m/B3C002C8-21A0-4F53-A06E-8CAB29FCF295@yesql.se
This reverts commit c2c537c56d.
It's now clear that whatever is going on there, it can't be blamed
on unexpected ANALYZE runs, because the statistics are the same
just before the failing query as they were at the start of the test.
It seems fairly hard to explain recent buildfarm failures without the
theory that something is doing an ANALYZE behind our backs. Probe
for this directly to see if it's true.
In principle the outputs of these queries should be stable, since the table
in question is small enough that ANALYZE's sample will include all rows.
But even if that turns out to be wrong, we can put up with some failures
for a bit. I don't intend to leave this here indefinitely.
Discussion: https://postgr.es/m/25502.1520277552@sss.pgh.pa.us
Commit 1bc0100d27 added this test, and
commits 882ea509fe,
958e20e42d,
4fa396464e tried to stabilize it. It's
still not stable, so keep trying.
The latest comment from Tom Lane is that disabling autovacuum seems
like a good strategy, but we might need to do it on more tables, hence
this patch.
Etsuro Fujita
Discussion: http://postgr.es/m/5A9928F1.2010206@lab.ntt.co.jp
Commit 1bc0100d27 added this test,
and commit 882ea509fe tried to
stabilize it. There were still failures, so commit
958e20e42d tried again to stabilize
it. That approach is still failing on jaguarundi, though, so
back it out and try something else. Specifically, instead of
disabling remote estimates for the table in question, let's tell
autovacuum to leave it alone.
Etsuro Fujita
Discussion: http://postgr.es/m/5A82DCCE.3060107@lab.ntt.co.jp
Even after commit 882ea509fe, some
buildfarm members are still failing in the postgres_fdw tests.
Try to fix that by disabling use of remote statistics for some
test cases.
Etsuro Fujita
Discussion: http://postgr.es/m/5A7D76CF.8080601@lab.ntt.co.jp
Commit 1bc0100d27 added these tests,
but they're not stable enough to survive in the buildfarm. Remove
CTIDs from the output in the hopes of fixing that.
Commit 0bf3ae88af allowed direct
foreign table modification; instead of fetching each row, updating
it locally, and then pushing the modification back to the remote
side, we would instead do all the work on the remote server via a
single remote UPDATE or DELETE command. However, that commit only
enabled this optimization when join tree consisted only of the
target table.
This change allows the same optimization when an UPDATE statement
has a FROM clause or a DELETE statement has a USING clause. This
works much like ordinary foreign join pushdown, in that the tables
must be on the same remote server, relevant parts of the query
must be pushdown-safe, and so forth.
Etsuro Fujita, reviewed by Ashutosh Bapat, Rushabh Lathia, and me.
Some formatting corrections by me.
Discussion: http://postgr.es/m/5A57193A.2080003@lab.ntt.co.jp
Discussion: http://postgr.es/m/b9cee735-62f8-6c07-7528-6364ce9347d0@lab.ntt.co.jp
Commit 4bbf6edfbd added a test case,
but it turns out that the test case doesn't reliably test for the
bug, and in the context of the regression test suite did not because
ANALYZE had not been run.
Report and patch by Etsuro Fujita. I added a comment along lines
previously suggested by Tom Lane.
Discussion: http://postgr.es/m/5A6195D8.8060206@lab.ntt.co.jp
When pushing down a join to a foreign server, postgres_fdw constructs
an alternative plan to be used for any EvalPlanQual rechecks that
prove to be necessary. This plan is stored as the outer subplan of
the Foreign Scan implementing the pushed-down join. Previously, this
alternative plan could have a different nominal sort ordering than its
parent, which seemed OK since there will only be one tuple per base
table anyway in the case of an EvalPlanQual recheck. Actually,
though, it caused a problem if that path was used as a building block
for the EvalPlanQual recheck plan of a higher-level foreign join,
because we could end up with a merge join one of whose inputs was not
labelled with the correct sort order. Repair by injecting an extra
Sort node into the EvalPlanQual recheck plan whenever it would
otherwise fail to be sorted at least as well as its parent Foreign
Scan.
Report by Jeff Janes. Patch by me, reviewed by Tom Lane, who also
provided the test case and comment text.
Discussion: http://postgr.es/m/CAMkU=1y2G8VOVBHv3iXU2TMAj7-RyBFFW1uhkr5sm9LQ2=X35g@mail.gmail.com
Commit 7012b132d, which added the ability to push down aggregates and
grouping to the remote server, wasn't careful to ensure that the remote
server would have the same idea we do about which columns are the grouping
columns, in cases where there are textually identical GROUP BY expressions.
Such cases typically led to "targetlist item has multiple sortgroupref
labels" errors.
To fix this reliably, switch over to using "GROUP BY column-number" syntax
rather than "GROUP BY expression" in transmitted queries, and adjust
foreign_grouping_ok() to be more careful about duplicating the sortgroupref
labeling of the local pathtarget.
Per bug #14890 from Sean Johnston. Back-patch to v10 where the buggy code
was introduced.
Jeevan Chalke, reviewed by Ashutosh Bapat
Discussion: https://postgr.es/m/20171107134948.1508.94783@wrigleys.postgresql.org
Antonin Houska reported that the planner does consider pushing
postgres_fdw_abs() to the remote side, which happens because we make
it shippable earlier in the test case file.
Jeevan Chalke provided this patch, which changes the join
condition to use random(), which is not shippable, instead.
Antonin reviewed the patch.
Discussion: http://postgr.es/m/15265.1511985971@localhost
rewriteTargetListUD's processing is dependent on the relkind of the query's
target table. That was fine at the time it was made to act that way, even
for queries on inheritance trees, because all tables in an inheritance tree
would necessarily be plain tables. However, the 9.5 feature addition
allowing some members of an inheritance tree to be foreign tables broke the
assumption that rewriteTargetListUD's output tlist could be applied to all
child tables with nothing more than column-number mapping. This led to
visible failures if foreign child tables had row-level triggers, and would
also break in cases where child tables belonged to FDWs that used methods
other than CTID for row identification.
To fix, delay running rewriteTargetListUD until after the planner has
expanded inheritance, so that it is applied separately to the (already
mapped) tlist for each child table. We can conveniently call it from
preprocess_targetlist. Refactor associated code slightly to avoid the
need to heap_open the target relation multiple times during
preprocess_targetlist. (The APIs remain a bit ugly, particularly around
the point of which steps scribble on parse->targetList and which don't.
But avoiding such scribbling would require a change in FDW callback APIs,
which is more pain than it's worth.)
Also fix ExecModifyTable to ensure that "tupleid" is reset to NULL when
we transition from rows providing a CTID to rows that don't. (That's
really an independent bug, but it manifests in much the same cases.)
Add a regression test checking one manifestation of this problem, which
was that row-level triggers on a foreign child table did not work right.
Back-patch to 9.5 where the problem was introduced.
Etsuro Fujita, reviewed by Ildus Kurbangaliev and Ashutosh Bapat
Discussion: https://postgr.es/m/20170514150525.0346ba72@postgrespro.ru
Instead of joining two partitioned tables in their entirety we can, if
it is an equi-join on the partition keys, join the matching partitions
individually. This involves teaching the planner about "other join"
rels, which are related to regular join rels in the same way that
other member rels are related to baserels. This can use significantly
more CPU time and memory than regular join planning, because there may
now be a set of "other" rels not only for every base relation but also
for every join relation. In most practical cases, this probably
shouldn't be a problem, because (1) it's probably unusual to join many
tables each with many partitions using the partition keys for all
joins and (2) if you do that scenario then you probably have a big
enough machine to handle the increased memory cost of planning and (3)
the resulting plan is highly likely to be better, so what you spend in
planning you'll make up on the execution side. All the same, for now,
turn this feature off by default.
Currently, we can only perform joins between two tables whose
partitioning schemes are absolutely identical. It would be nice to
cope with other scenarios, such as extra partitions on one side or the
other with no match on the other side, but that will have to wait for
a future patch.
Ashutosh Bapat, reviewed and tested by Rajkumar Raghuwanshi, Amit
Langote, Rafia Sabih, Thomas Munro, Dilip Kumar, Antonin Houska, Amit
Khandekar, and by me. A few final adjustments by me.
Discussion: http://postgr.es/m/CAFjFpRfQ8GrQvzp3jA2wnLqrHmaXna-urjm_UY9BqXj=EaDTSA@mail.gmail.com
Discussion: http://postgr.es/m/CAFjFpRcitjfrULr5jfuKWRPsGUX0LQ0k8-yG0Qw2+1LBGNpMdw@mail.gmail.com
If the user modifies a view that has CHECK OPTIONs and this gets
translated into a modification to an underlying relation which happens
to be a foreign table, the check options should be enforced. In the
normal code path, that was happening properly, but it was not working
properly for "direct" modification because the whole operation gets
pushed to the remote side in that case and we never have an option to
enforce the constraint against individual tuples. Fix by disabling
direct modification when there is a need to enforce CHECK OPTIONs.
Etsuro Fujita, reviewed by Kyotaro Horiguchi and by me.
Discussion: http://postgr.es/m/f8a48f54-6f02-9c8a-5250-9791603171ee@lab.ntt.co.jp
The new test cases added in commit 8bf58c0d9 turn out to have output
that can vary depending on the lc_messages setting prevailing on the
test server. Hide the remote end's error messages to ensure stable
output. This isn't a terribly desirable solution; we'd rather know
that the connection failed for the expected reason and not some other
one. But there seems little choice for the moment.
Per buildfarm.
Discussion: https://postgr.es/m/18419.1500658570@sss.pgh.pa.us
Previously, postgres_fdw would keep on using an existing connection even
if the user did ALTER SERVER or ALTER USER MAPPING commands that should
affect connection parameters. Teach it to watch for catcache invals
on these catalogs and re-establish connections when the relevant catalog
entries change. Per bug #14738 from Michal Lis.
In passing, clean up some rather crufty decisions in commit ae9bfc5d6
about where fields of ConnCacheEntry should be reset. We now reset
all the fields whenever we open a new connection.
Kyotaro Horiguchi, reviewed by Ashutosh Bapat and myself.
Back-patch to 9.3 where postgres_fdw appeared.
Discussion: https://postgr.es/m/20170710113917.7727.10247@wrigleys.postgresql.org
This seemed like a good idea originally because there's no way to mark
a range partition as accepting NULL, but that now seems more like a
current limitation than something we want to lock down for all time.
For example, there's a proposal to add the notion of a default
partition which accepts all rows not otherwise routed, which directly
conflicts with the idea that a range-partitioned table should never
allow nulls anywhere. So let's change this while we still can, by
putting the NOT NULL test into the partition constraint instead of
changing the column properties.
Amit Langote and Robert Haas, reviewed by Amit Kapila
Discussion: http://postgr.es/m/8e2dd63d-c6fb-bb74-3c2b-ed6d63629c9d@lab.ntt.co.jp
Objects in an extension are shippable to a foreign server if the
extension is part of the foreign server definition's shippable
extensions list. But this was not properly considered in some cases
when checking whether a join condition can be pushed to a foreign server
and the join condition uses an object from a shippable extension. So
the join would never be pushed down in those cases.
So, the list of extensions needs to be made available in fpinfo of the
relation being considered to be pushed down before any expressions are
assessed for being shippable. Fix foreign_join_ok() to do that for a
join relation.
The code to save FDW options in fpinfo is scattered at multiple places.
Bring all of that together into functions apply_server_options(),
apply_table_options(), and merge_fdw_options().
David Rowley and Ashutosh Bapat, per report from David Rowley
If there can certainly be no more than one matching inner row for a given
outer row, then the executor can move on to the next outer row as soon as
it's found one match; there's no need to continue scanning the inner
relation for this outer row. This saves useless scanning in nestloop
and hash joins. In merge joins, it offers the opportunity to skip
mark/restore processing, because we know we have not advanced past the
first possible match for the next outer row.
Of course, the devil is in the details: the proof of uniqueness must
depend only on joinquals (not otherquals), and if we want to skip
mergejoin mark/restore then it must depend only on merge clauses.
To avoid adding more planning overhead than absolutely necessary,
the present patch errs in the conservative direction: there are cases
where inner_unique or skip_mark_restore processing could be used, but
it will not do so because it's not sure that the uniqueness proof
depended only on "safe" clauses. This could be improved later.
David Rowley, reviewed and rather heavily editorialized on by me
Discussion: https://postgr.es/m/CAApHDvqF6Sw-TK98bW48TdtFJ+3a7D2mFyZ7++=D-RyPsL76gw@mail.gmail.com
Don't import partitions. Do import partitioned tables which are
not themselves partitions.
Report by Stephen Frost. Design and patch by Michael Paquier,
reviewed by Amit Langote. Documentation revised by me.
Discussion: http://postgr.es/m/20170309141531.GD9812@tamriel.snowman.net
This extends the Aggregate node with two new features: HashAggregate
can now run multiple hashtables concurrently, and a new strategy
MixedAggregate populates hashtables while doing sorted grouping.
The planner will now attempt to save as many sorts as possible when
planning grouping sets queries, while not exceeding work_mem for the
estimated combined sizes of all hashtables used. No SQL-level changes
are required. There should be no user-visible impact other than the
new EXPLAIN output and possible changes to result ordering when ORDER
BY was not used (which affected a few regression tests). The
enable_hashagg option is respected.
Author: Andrew Gierth
Reviewers: Mark Dilger, Andres Freund
Discussion: https://postgr.es/m/87vatszyhj.fsf@news-spur.riddles.org.uk
The previous deparsing logic wasn't smart enough to produce subqueries
when deparsing; make it smart enough to do that. However, we only do
it that way when necessary, because it generates more complicated SQL
which will be harder for any humans reading the queries to understand.
Etsuro Fujita, reviewed by Ashutosh Bapat
Discussion: http://postgr.es/m/c449261a-b033-dc02-9254-2fe5b7044795@lab.ntt.co.jp
Commit 7012b132d added some tests that consumed an excessive amount of
time, more than tripling the time needed for "make installcheck" for this
module. Add filter conditions to reduce the number of rows scanned,
bringing the runtime down to within hailing distance of what it was before.
Jeevan Chalke and Ashutosh Bapat, per a gripe from me
Discussion: https://postgr.es/m/16565.1478104765@sss.pgh.pa.us
This fixes problems where a plan must change but fails to do so,
as seen in a bug report from Rajkumar Raghuwanshi.
For ALTER FOREIGN TABLE OPTIONS, do this through the standard method of
forcing a relcache flush on the table. For ALTER FOREIGN DATA WRAPPER
and ALTER SERVER, just flush the whole plan cache on any change in
pg_foreign_data_wrapper or pg_foreign_server. That matches the way
we handle some other low-probability cases such as opclass changes, and
it's unclear that the case arises often enough to be worth working harder.
Besides, that gives a patch that is simple enough to back-patch with
confidence.
Back-patch to 9.3. In principle we could apply the code change to 9.2 as
well, but (a) we lack postgres_fdw to test it with, (b) it's doubtful that
anyone is doing anything exciting enough with FDWs that far back to need
this desperately, and (c) the patch doesn't apply cleanly.
Patch originally by Amit Langote, reviewed by Etsuro Fujita and Ashutosh
Bapat, who each contributed substantial changes as well.
Discussion: https://postgr.es/m/CAKcux6m5cA6rRPTKkqVdJ-R=KKDfe35Q_ZuUqxDSV_4hwga=og@mail.gmail.com
While converting expressions in an upper-level plan node so that they
reference Vars and expressions provided by the input plan node(s),
don't convert plain Const items, even if there happens to be a matching
Const in the input. It's silly to do so because a Var is more expensive to
execute than a Const. Moreover, converting can fool ExecCheckPlanOutput's
check that an insert or update query inserts nulls into dropped columns,
leading to "query provides a value for a dropped column" errors during
INSERT or UPDATE on a table with a dropped column. We could solve this
by making that check more complicated, but I don't see the point; this fix
should save a marginal number of cycles, and it also makes for less messy
EXPLAIN output, as shown by the ensuing regression test result changes.
Per report from Pavel Hanák. I have not incorporated a test case based
on that example, as there doesn't seem to be a simple way of checking
this in isolation without making a bunch of assumptions about other
planner and SQL-function behavior.
Back-patch to 9.6. This setrefs.c behavior exists much further back,
but there is not currently reason to think that it causes problems
before 9.6.
Discussion: <83shraampf.fsf@is-it.eu>
A query that only aggregates one row isn't a great argument for pushdown,
and buildfarm member brolga decides against it. Adjust the query a bit
in the hopes of getting remote aggregation to win consistently.
Jeevan Chalke, per suggestion from Tom Lane
Set enable_hashagg to false for tests involving least_agg(), so that
we get the same plan regardless of local costing variances. Also,
remove a test involving sqrt(); it's there to test deparsing of
HAVING clauses containing expressions, but that's tested elsewhere
anyway, and sqrt(2) deparses with different amounts of precision on
different machines.
Per buildfarm.
Now that the upper planner uses paths, and now that we have proper hooks
to inject paths into the upper planning process, it's possible for
foreign data wrappers to arrange to push aggregates to the remote side
instead of fetching all of the rows and aggregating them locally. This
figures to be a massive win for performance, so teach postgres_fdw to
do it.
Jeevan Chalke and Ashutosh Bapat. Reviewed by Ashutosh Bapat with
additional testing by Prabhat Sahu. Various mostly cosmetic changes
by me.
You can use ALTER FOREIGN TABLE SET WITH OIDS on a foreign table, but the
oid column read out as zeros, because the postgres_fdw didn't know about
it. Teach postgres_fdw how to fetch it.
Etsuro Fujita, with an additional test case by me.
Discussion: <56E90A76.5000503@lab.ntt.co.jp>
We must not push down a foreign join when the foreign tables involved
should be accessed under different user mappings. Previously we tried
to enforce that rule literally during planning, but that meant that the
resulting plans were dependent on the current contents of the
pg_user_mapping catalog, and we had to blow away all cached plans
containing any remote join when anything at all changed in pg_user_mapping.
This could have been improved somewhat, but the fact that a syscache inval
callback has very limited info about what changed made it hard to do better
within that design. Instead, let's change the planner to not consider user
mappings per se, but to allow a foreign join if both RTEs have the same
checkAsUser value. If they do, then they necessarily will use the same
user mapping at runtime, and we don't need to know specifically which one
that is. Post-plan-time changes in pg_user_mapping no longer require any
plan invalidation.
This rule does give up some optimization ability, to wit where two foreign
table references come from views with different owners or one's from a view
and one's directly in the query, but nonetheless the same user mapping
would have applied. We'll sacrifice the first case, but to not regress
more than we have to in the second case, allow a foreign join involving
both zero and nonzero checkAsUser values if the nonzero one is the same as
the prevailing effective userID. In that case, mark the plan as only
runnable by that userID.
The plancache code already had a notion of plans being userID-specific,
in order to support RLS. It was a little confused though, in particular
lacking clarity of thought as to whether it was the rewritten query or just
the finished plan that's dependent on the userID. Rearrange that code so
that it's clearer what depends on which, and so that the same logic applies
to both RLS-injected role dependency and foreign-join-injected role
dependency.
Note that this patch doesn't remove the other issue mentioned in the
original complaint, which is that while we'll reliably stop using a foreign
join if it's disallowed in a new context, we might fail to start using a
foreign join if it's now allowed, but we previously created a generic
cached plan that didn't use one. It was agreed that the chance of winning
that way was not high enough to justify the much larger number of plan
invalidations that would have to occur if we tried to cause it to happen.
In passing, clean up randomly-varying spelling of EXPLAIN commands in
postgres_fdw.sql, and fix a COSTS ON example that had been allowed to
leak into the committed tests.
This reverts most of commits fbe5a3fb7 and 5d4171d1c, which were the
previous attempt at ensuring we wouldn't push down foreign joins that
span permissions contexts.
Etsuro Fujita and Tom Lane
Discussion: <d49c1e5b-f059-20f4-c132-e9752ee0113e@lab.ntt.co.jp>
This is fallout from join pushdown; get_relid_attribute_name can't
handle an attribute number of 0, indicating a whole-row reference,
and shouldn't be called in that case.
Etsuro Fujita, reviewed by Ashutosh Bapat
As pointed out by Ashutosh Bapat, the header comments for this file
say that schema-qualification is needed for all and only those types
outside pg_catalog. pg_catalog.text is not outside pg_catalog.
something.* IS NOT NULL means that every attribute of the row is not
NULL, not that the row itself is non-NULL (e.g. because it's coming
from below an outer join. Use (somevar.*)::pg_catalog.text IS NOT
NULL instead.
Ashutosh Bapat, per a report by Rushabh Lathia. Reviewed by
Amit Langote and Etsuro Fujita. Schema-qualification added by me.
As discovered by Andreas Seltenreich via sqlsmith, it's possible for a
remote join to need to generate a target list which contains a
PlaceHolderVar which would need to be evaluated on the remote server.
This happens when we try to push down a join tree which contains outer
joins and the nullable side of the join contains a subquery which
evauates some expression which can go to NULL above the level of the
join. Since the deparsing logic can't build a remote query that
involves subqueries, it fails while trying to produce an SQL query
that can be sent to the remote side. Detect such cases and don't try
to push down the join at all.
It's actually fine to push down the join if the PlaceHolderVar needs
to be evaluated at the current join level. This patch makes a small
change to build_tlist_to_deparse so that this case will work.
Amit Langote, Ashutosh Bapat, and me.
Commit 3151f16e18 was intended to be
a commit of a patch from Ashutosh Bapat, but instead I mistakenly
committed an earlier version from Michael Paquier (because both
patches were submitted with the same filename, and I confused them).
Michael's patch fixes the crash but doesn't actually implement the
correct test.
Repair the incorrect logic, and also expand the comments considerably
so that this is all more clear.
Ashutosh Bapat and Robert Haas
If there's a filter condition on either side of a full outer join,
it is neither correct to attach it to the join's ON clause nor to
throw it into the toplevel WHERE clause. Just don't push down the
join in that case.
To maximize the number of cases where we can still push down full
joins, push inner join conditions into the ON clause at the first
opportunity rather than postponing them to the top-level WHERE
clause. This produces nicer SQL, anyway.
This bug was introduced in e4106b2528.
Ashutosh Bapat, per report from Rajkumar Raghuwanshi.
Previously, querying the xmin column of a single postgres_fdw foreign
table fetched the tuple length, xmax the typmod, and cmin or cmax the
composite type OID of the tuple. However, when you queried several
such tables and the join got shipped to the remote side, these columns
ended up containing the remote values of the corresponding columns.
Both behaviors are rather unprincipled, the former for obvious reasons
and the latter because the remote values of these columns don't have
any local significance; our transaction IDs are in a different space
than those of the remote machine. Clean this up by setting all of
these fields to 0 in both cases. Also fix the handling of tableoid
to be sane.
Robert Haas and Ashutosh Bapat, reviewed by Etsuro Fujita.
Commit fbe5a3fb73 accidentally changed
this behavior; put things back the way they were, and add some
regression tests.
Report by Andres Freund; patch by Ashutosh Bapat, with a bit of
kibitzing by me.
A join clause might mention multiple relations on either side, so it
need not be the case that a given joinrel's constituent relations are
all on one side of the join clause or all on the other.
Report by Rajkumar Raghuwanshi. Analysis and fix by Michael Paquier
and Ashutosh Bapat.
postgres_fdw can now sent an UPDATE or DELETE statement directly to
the foreign server in simple cases, rather than sending a SELECT FOR
UPDATE statement and then updating or deleting rows one-by-one.
Etsuro Fujita, reviewed by Rushabh Lathia, Shigeru Hanada, Kyotaro
Horiguchi, Albe Laurenz, Thom Brown, and me.
Commit ccd8f97922 gave us the ability to
request that the remote side sort the data, and, later, commit
e4106b2528 gave us the ability to
request that the remote side perform the join for us rather than doing
it locally. But we could not do both things at the same time: a
remote SQL query that had an ORDER BY clause would never be a join.
This commit adds that capability.
Ashutosh Bapat, reviewed by me.
Previously, we included NULLS FIRST when appropriate but relied on the
default behavior to be NULLS LAST. This is, however, not true for a
sort in descending order and seems like a fragile assumption anyway.
Report by Rajkumar Raghuwanshi. Patch by Ashutosh Bapat. Review
comments from Michael Paquier and Tom Lane.
If we've got a relatively straightforward join between two tables,
this pushes that join down to the remote server instead of fetching
the rows for each table and performing the join locally. Some cases
are not handled yet, such as SEMI and ANTI joins. Also, we don't
yet attempt to create presorted join paths or parameterized join
paths even though these options do get tried for a base relation
scan. Nevertheless, this seems likely to be a very significant win
in many practical cases.
Shigeru Hanada and Ashutosh Bapat, reviewed by Robert Haas, with
additional review at various points by Tom Lane, Etsuro Fujita,
KaiGai Kohei, and Jeevan Chalke.
deparseReturningList ended up adding up RETURNING NULL to the code, but
code elsewhere saw an empty list of attributes and concluded that it
should not expect tuples from the remote side.
Etsuro Fujita and Robert Haas, reviewed by Thom Brown
The default fetch size of 100 rows might not be right in every
environment, so allow users to configure it.
Corey Huinker, reviewed by Kyotaro Horiguchi, Andres Freund, and me.
listForeignTables' invocation of processSQLNamePattern did not match up
with the other ones that handle potentially-schema-qualified names; it
failed to make use of pg_table_is_visible() and also passed the name
arguments in the wrong order. Bug seems to have been aboriginal in commit
0d692a0dc9. It accidentally sort of worked as long as you didn't
inquire too closely into the behavior, although the silliness was later
exposed by inconsistencies in the test queries added by 59efda3e50
(which I probably should have questioned at the time, but didn't).
Per bug #13899 from Reece Hart. Patch by Reece Hart and Tom Lane.
Back-patch to all affected branches.
When use_remote_estimate is enabled, consider adding ORDER BY to the
query we sending to the remote server so that we can use that ordered
data for a merge join. Commit f18c944b61
arranges to push down the query pathkeys, which seems like the case
mostly likely to be a win, but testing shows this can sometimes win,
too.
For a regular table, we know which indexes are present and therefore
test whether the ordering provided by each such index is useful. Here,
we take the opposite approach: guess what orderings would be useful if
they could be generated cheaply, and then ask the remote side what those
will cost.
Ashutosh Bapat, with very substantial cosmetic revisions by me. Also
reviewed by Rushabh Lathia.
Rather than relying on other extensions to be available for installation,
let's just add some test objects to the postgres_fdw extension itself
within the regression script.
If the join problem's entire ORDER BY clause can be pushed to the
remote server, consider a path that adds this ORDER BY clause. If
use_remote_estimate is on, we cost this path using an additional
remote EXPLAIN. If not, we just estimate that the path costs 20%
more, which is intended to be large enough that we won't request a
remote sort when it's not helpful, but small enough that we'll have
the remote side do the sort when in doubt. In some cases, the remote
sort might actually be free, because the remote query plan might
happen to produce output that is ordered the way we need, but without
remote estimates we have no way of knowing that.
It might also be useful to request sorted output from the remote side
if it enables an efficient merge join, but this patch doesn't attempt
to handle that case.
Ashutosh Bapat with revisions by me. Also reviewed by Fabrízio de Royes
Mello and Jeevan Chalke.
If we have a local Var of say varchar type with default collation, and
we apply a RelabelType to convert that to text with default collation, we
don't want to consider that as creating an FDW_COLLATE_UNSAFE situation.
It should be okay to compare that to a remote Var, so long as the remote
Var determines the comparison collation. (When we actually ship such an
expression to the remote side, the local Var would become a Param with
default collation, meaning the remote Var would in fact control the
comparison collation, because non-default implicit collation overrides
default implicit collation in parse_collate.c.) To fix, be more precise
about what FDW_COLLATE_NONE means: it applies either to a noncollatable
data type or to a collatable type with default collation, if that collation
can't be traced to a remote Var. (When it can, FDW_COLLATE_SAFE is
appropriate.) We were essentially using that interpretation already at
the Var/Const/Param level, but we weren't bubbling it up properly.
An alternative fix would be to introduce a separate FDW_COLLATE_DEFAULT
value to describe the second situation, but that would add more code
without changing the actual behavior, so it didn't seem worthwhile.
Also, since we're clarifying the rule to be that we care about whether
operator/function input collations match, there seems no need to fail
immediately upon seeing a Const/Param/non-foreign-Var with nondefault
collation. We only have to reject if it appears in a collation-sensitive
context (for example, "var IS NOT NULL" is perfectly safe from a collation
standpoint, whatever collation the var has). So just set the state to
UNSAFE rather than failing immediately.
Per report from Jeevan Chalke. This essentially corrects some sloppy
thinking in commit ed3ddf918b, so back-patch
to 9.3 where that logic appeared.
The newly added ON CONFLICT clause allows to specify an alternative to
raising a unique or exclusion constraint violation error when inserting.
ON CONFLICT refers to constraints that can either be specified using a
inference clause (by specifying the columns of a unique constraint) or
by naming a unique or exclusion constraint. DO NOTHING avoids the
constraint violation, without touching the pre-existing row. DO UPDATE
SET ... [WHERE ...] updates the pre-existing tuple, and has access to
both the tuple proposed for insertion and the existing tuple; the
optional WHERE clause can be used to prevent an update from being
executed. The UPDATE SET and WHERE clauses have access to the tuple
proposed for insertion using the "magic" EXCLUDED alias, and to the
pre-existing tuple using the table name or its alias.
This feature is often referred to as upsert.
This is implemented using a new infrastructure called "speculative
insertion". It is an optimistic variant of regular insertion that first
does a pre-check for existing tuples and then attempts an insert. If a
violating tuple was inserted concurrently, the speculatively inserted
tuple is deleted and a new attempt is made. If the pre-check finds a
matching tuple the alternative DO NOTHING or DO UPDATE action is taken.
If the insertion succeeds without detecting a conflict, the tuple is
deemed inserted.
To handle the possible ambiguity between the excluded alias and a table
named excluded, and for convenience with long relation names, INSERT
INTO now can alias its target table.
Bumps catversion as stored rules change.
Author: Peter Geoghegan, with significant contributions from Heikki
Linnakangas and Andres Freund. Testing infrastructure by Jeff Janes.
Reviewed-By: Heikki Linnakangas, Andres Freund, Robert Haas, Simon Riggs,
Dean Rasheed, Stephen Frost and many others.
As noted by Etsuro Fujita [1] and Dean Rasheed[2],
cb1ca4d800 changed ExecBuildAuxRowMark()
to always look for the tableoid in the target list, but didn't also
change preprocess_targetlist() to always include the tableoid. This
resulted in errors with soon-to-be-added RLS with inheritance tests,
and errors when using inheritance with foreign tables.
Authors: Etsuro Fujita and Dean Rasheed (independently)
Minor word-smithing on the comments by me.
[1] 552CF0B6.8010006@lab.ntt.co.jp
[2] CAEZATCVmFUfUOwwhnBTcgi6AquyjQ0-1fyKd0T3xBWJvn+xsFA@mail.gmail.com
The previous coding in get_const_expr() tried to avoid quoting integer,
float, and numeric literals if at all possible. While that looks nice,
it means that dumped expressions might re-parse to something that's
semantically equivalent but not the exact same parsetree; for example
a FLOAT8 constant would re-parse as a NUMERIC constant with a cast to
FLOAT8. Though the result would be the same after constant-folding,
this is problematic in certain contexts. In particular, Jeff Davis
pointed out that this could cause unexpected failures in ALTER INHERIT
operations because of child tables having not-exactly-equivalent CHECK
expressions. Therefore, favor correctness over legibility and dump
such constants in quotes except in the limited cases where they'll
be interpreted as the same type even without any casting.
This results in assorted small changes in the regression test outputs,
and will affect display of user-defined views and rules similarly.
The odds of that causing problems in the field seem non-negligible;
given the lack of previous complaints, it seems best not to change
this in the back branches.
Foreign tables can now be inheritance children, or parents. Much of the
system was already ready for this, but we had to fix a few things of
course, mostly in the area of planner and executor handling of row locks.
As side effects of this, allow foreign tables to have NOT VALID CHECK
constraints (and hence to accept ALTER ... VALIDATE CONSTRAINT), and to
accept ALTER SET STORAGE and ALTER SET WITH/WITHOUT OIDS. Continuing to
disallow these things would've required bizarre and inconsistent special
cases in inheritance behavior. Since foreign tables don't enforce CHECK
constraints anyway, a NOT VALID one is a complete no-op, but that doesn't
mean we shouldn't allow it. And it's possible that some FDWs might have
use for SET STORAGE or SET WITH OIDS, though doubtless they will be no-ops
for most.
An additional change in support of this is that when a ModifyTable node
has multiple target tables, they will all now be explicitly identified
in EXPLAIN output, for example:
Update on pt1 (cost=0.00..321.05 rows=3541 width=46)
Update on pt1
Foreign Update on ft1
Foreign Update on ft2
Update on child3
-> Seq Scan on pt1 (cost=0.00..0.00 rows=1 width=46)
-> Foreign Scan on ft1 (cost=100.00..148.03 rows=1170 width=46)
-> Foreign Scan on ft2 (cost=100.00..148.03 rows=1170 width=46)
-> Seq Scan on child3 (cost=0.00..25.00 rows=1200 width=46)
This was done mainly to provide an unambiguous place to attach "Remote SQL"
fields, but it is useful for inherited updates even when no foreign tables
are involved.
Shigeru Hanada and Etsuro Fujita, reviewed by Ashutosh Bapat and Kyotaro
Horiguchi, some additional hacking by me
As with NOT NULL constraints, we consider that such constraints are merely
reports of constraints that are being enforced by the remote server (or
other underlying storage mechanism). Their only real use is to allow
planner optimizations, for example in constraint-exclusion checks. Thus,
the code changes here amount to little more than removal of the error that
was formerly thrown for applying CHECK to a foreign table.
(In passing, do a bit of cleanup of the ALTER FOREIGN TABLE reference page,
which had accumulated some weird decisions about ordering etc.)
Shigeru Hanada and Etsuro Fujita, reviewed by Kyotaro Horiguchi and
Ashutosh Bapat.
In commit 462bd95705, I changed postgres_fdw
to rely on get_plan_rowmark() instead of get_parse_rowmark(). I still
think that's a good idea in the long run, but as Etsuro Fujita pointed out,
it doesn't work today because planner.c forces PlanRowMarks to have
markType = ROW_MARK_COPY for all foreign tables. There's no urgent reason
to change this in the back branches, so let's just revert that part of
yesterday's commit rather than trying to design a better solution under
time pressure.
Also, add a regression test case showing what postgres_fdw does with FOR
UPDATE/SHARE. I'd blithely assumed there was one already, else I'd have
realized yesterday that this code didn't work.
postgres_fdw would send query conditions involving system columns to the
remote server, even though it makes no effort to ensure that system
columns other than CTID match what the remote side thinks. tableoid,
in particular, probably won't match and might have some use in queries.
Hence, prevent sending conditions that include non-CTID system columns.
Also, create_foreignscan_plan neglected to check local restriction
conditions while determining whether to set fsSystemCol for a foreign
scan plan node. This again would bollix the results for queries that
test a foreign table's tableoid.
Back-patch the first fix to 9.3 where postgres_fdw was introduced.
Back-patch the second to 9.2. The code is probably broken in 9.1 as
well, but the patch doesn't apply cleanly there; given the weak state
of support for FDWs in 9.1, it doesn't seem worth fixing.
Etsuro Fujita, reviewed by Ashutosh Bapat, and somewhat modified by me
That allows to run those tests against a postmaster listening on a
nonstandard port without requiring to export PGPORT in postmaster's
environment.
This still doesn't support connecting to a nondefault host without
configuring it in postmaster's environment. That's harder and less
frequently used though. So this is a useful step.
That allows parallel installcheck to succeed inside contrib/. The
output is not particularly pretty unless make's -O option to
synchronize the output is used.
There's other tests, outside contrib, that use a hardcoded,
non-unique, database name. Those prohibit paralell installcheck to be
used across more directories; but that's something for a separate
patch.
This command provides an automated way to create foreign table definitions
that match remote tables, thereby reducing tedium and chances for error.
In this patch, we provide the necessary core-server infrastructure and
implement the feature fully in the postgres_fdw foreign-data wrapper.
Other wrappers will throw a "feature not supported" error until/unless
they are updated.
Ronan Dunklau and Michael Paquier, additional work by me
We were emitting "(SELECT null::typename)", which is usually interpreted
as a scalar subselect, but not so much in the context "x = ANY(...)".
This led to remote-side parsing failures when remote_estimate is enabled.
A quick and ugly fix is to stick in an extra cast step,
"((SELECT null::typename)::typename)". The cast will be thrown away as
redundant by parse analysis, but not before it's done its job of making
sure the grammar sees the ANY argument as an a_expr rather than a
select_with_parens. Per an example from Hannu Krosing.
