Fix a small number of places that were testing the result of snprintf()
but doing so incorrectly. The right test for buffer overrun, per C99,
is "result >= bufsize" not "result > bufsize". Some places were also
checking for failure with "result == -1", but the standard only says
that a negative value is delivered on failure.
(Note that this only makes these places correct if snprintf() delivers
C99-compliant results. But at least now these places are consistent
with all the other places where we assume that.)
Also, make psql_start_test() and isolation_start_test() check for
buffer overrun while constructing their shell commands. There seems
like a higher risk of overrun, with more severe consequences, here
than there is for the individual file paths that are made elsewhere
in the same functions, so this seemed like a worthwhile change.
Also fix guc.c's do_serialize() to initialize errno = 0 before
calling vsnprintf. In principle, this should be unnecessary because
vsnprintf should have set errno if it returns a failure indication ...
but the other two places this coding pattern is cribbed from don't
assume that, so let's be consistent.
These errors are all very old, so back-patch as appropriate. I think
that only the shell command overrun cases are even theoretically
reachable in practice, but there's not much point in erroneous error
checks.
Discussion: https://postgr.es/m/17245.1534289329@sss.pgh.pa.us
Commit dafa084, added in 10, made the removal of temporary orphaned
tables more aggressive. This commit makes an extra step into the
aggressiveness by adding a flag in each backend's MyProc which tracks
down any temporary namespace currently in use. The flag is set when the
namespace gets created and can be reset if the temporary namespace has
been created in a transaction or sub-transaction which is aborted. The
flag value assignment is assumed to be atomic, so this can be done in a
lock-less fashion like other flags already present in PGPROC like
databaseId or backendId, still the fact that the temporary namespace and
table created are still locked until the transaction creating those
commits acts as a barrier for other backends.
This new flag gets used by autovacuum to discard more aggressively
orphaned tables by additionally checking for the database a backend is
connected to as well as its temporary namespace in-use, removing
orphaned temporary relations even if a backend reuses the same slot as
one which created temporary relations in a past session.
The base idea of this patch comes from Robert Haas, has been written in
its first version by Tsunakawa Takayuki, then heavily reviewed by me.
Author: Tsunakawa Takayuki
Reviewed-by: Michael Paquier, Kyotaro Horiguchi, Andres Freund
Discussion: https://postgr.es/m/0A3221C70F24FB45833433255569204D1F8A4DC6@G01JPEXMBYT05
Backpatch: 11-, as PGPROC gains a new flag and we don't want silent ABI
breakages on already released versions.
Currently, we release the asynchronous resources as soon as it is evident
that no more rows will be needed e.g. when a Limit is filled. This can be
problematic especially for custom and foreign scans where we can scan
backward. Fix that by disallowing the shutting down of resources in such
cases.
Reported-by: Robert Haas
Analysed-by: Robert Haas and Amit Kapila
Author: Amit Kapila
Reviewed-by: Robert Haas
Backpatch-through: 9.6 where this code was introduced
Discussion: https://postgr.es/m/86137f17-1dfb-42f9-7421-82fd786b04a1@anayrat.info
Multiple calls to XMLTABLE in a query (e.g. laterally applying it to a
table with an xml column, an important use-case) were leaking large
amounts of memory into the per-query context, blowing up memory usage.
Repair by reorganizing memory context usage in nodeTableFuncscan; use
the usual per-tuple context for row-by-row evaluations instead of
perValueCxt, and use the explicitly created context -- renamed from
perValueCxt to perTableCxt -- for arguments and state for each
individual table-generation operation.
Backpatch to PG10 where this code was introduced.
Original report by IRC user begriffs; analysis and patch by me.
Reviewed by Tom Lane and Pavel Stehule.
Discussion: https://postgr.es/m/153394403528.10284.7530399040974170549@wrigleys.postgresql.org
When considering a partitioning parent rel, we should stop processing that
subroot as soon as we've done adjust_appendrel_attrs and any securityQuals
updates. The rest of this is unnecessary, and indeed adding duplicate
subquery RTEs to the subroot is *wrong*. As the code stood, the children
of that partition ended up with two sets of copied subquery RTEs, confusing
matters greatly. Even more hilarity ensued if all of the children got
excluded by constraint exclusion, so that the extra RTEs didn't make it
back into the parent rtable.
Per fuzz testing by Andreas Seltenreich. Back-patch to v11 where this
got broken (by commit 0a480502b, it looks like).
Discussion: https://postgr.es/m/87va8g7vq0.fsf@ansel.ydns.eu
These changes were put in at some stage of the development process, but
are unnecessary and should not have made it into the final patch. Mea
culpa.
Per gripe from Andreas Freund
Backpatch to REL_11_STABLE
Commit 9da0cc3528, which introduced parallel CREATE INDEX, failed to
propagate relmapper.c backend local cache state to parallel worker
processes. This could result in parallel index builds against mapped
catalog relations where the leader process (participating as a worker)
scans the new, pristine relfilenode, while worker processes scan the
obsolescent relfilenode. When this happened, the final index structure
was typically not consistent with the owning table's structure. The
final index structure could contain entries formed from both heap
relfilenodes. Only rebuilds on mapped catalog relations that occur as
part of a VACUUM FULL or CLUSTER could become corrupt in practice, since
their mapped relation relfilenode swap is what allows the inconsistency
to arise.
On master, fix the problem by propagating the required relmapper.c
backend state as part of standard parallel initialization (Cf. commit
29d58fd3). On v11, simply disallow builds against mapped catalog
relations by deeming them parallel unsafe.
Author: Peter Geoghegan
Reported-By: "death lock"
Reviewed-By: Tom Lane, Amit Kapila
Bug: #15309
Discussion: https://postgr.es/m/153329671686.1405.18298309097348420351@wrigleys.postgresql.org
Backpatch: 11-, where parallel CREATE INDEX was introduced.
A caller of TRUNCATE could previously queue for an access exclusive lock
on a relation it may not have permission to truncate, potentially
interfering with users authorized to work on it. This can be very
intrusive depending on the lock attempted to be taken. For example,
pg_authid could be blocked, preventing any authentication attempt to
happen on a PostgreSQL instance.
This commit fixes the case of TRUNCATE so as RangeVarGetRelidExtended is
used with a callback doing the necessary ACL checks at an earlier stage,
avoiding lock queuing issues, so as an immediate failure happens for
unprivileged users instead of waiting on a lock that would not be
taken.
This is rather similar to the type of work done in cbe24a6 for CLUSTER,
and the code of TRUNCATE is this time refactored so as there is no
user-facing changes. As the commit for CLUSTER, no back-patch is done.
Reported-by: Lloyd Albin, Jeremy Schneider
Author: Michael Paquier
Reviewed by: Nathan Bossart, Kyotaro Horiguchi
Discussion: https://postgr.es/m/152512087100.19803.12733865831237526317@wrigleys.postgresql.org
Discussion: https://postgr.es/m/20180806165816.GA19883@paquier.xyz
A database owner running a database-level REINDEX has the possibility to
also do the operation on shared system catalogs without being an owner
of them, which allows him to block resources it should not have access
to. The same goes for a schema owner. For example, PostgreSQL would go
unresponsive and even block authentication if a lock is waited for
pg_authid. This commit makes sure that a user running a REINDEX SYSTEM,
DATABASE or SCHEMA only works on the following relations:
- The user is a superuser
- The user is the table owner
- The user is the database/schema owner, only if the relation worked on
is not shared.
Robert has worded most the documentation changes, and I have coded the
core part.
Reported-by: Lloyd Albin, Jeremy Schneider
Author: Michael Paquier, Robert Haas
Reviewed by: Nathan Bossart, Kyotaro Horiguchi
Discussion: https://postgr.es/m/152512087100.19803.12733865831237526317@wrigleys.postgresql.org
Discussion: https://postgr.es/m/20180805211059.GA2185@paquier.xyz
Backpatch-through: 11- as the current behavior has been around for a
very long time and could be disruptive for already released branches.
This Assert thought that a given rel couldn't be both leaf and
non-leaf, but it turns out that in some unusual plan trees
that's wrong, so remove it.
The lack of testing for cases like that is quite concerning ---
there is little reason for confidence that there aren't other
bugs in the area. But developing a stable test case seems
rather difficult, and in any case we don't need this Assert.
David Rowley
Discussion: https://postgr.es/m/CAJGNTeOkdk=UVuMugmKL7M=owgt4nNr1wjxMg1F+mHsXyLCzFA@mail.gmail.com
exit() is not async-signal safe. Even if the libc implementation is, 3rd
party libraries might have installed unsafe atexit() callbacks. After
receiving SIGQUIT, we really just want to exit as quickly as possible, so
we don't really want to run the atexit() callbacks anyway.
The original report by Jimmy Yih was a self-deadlock in startup_die().
However, this patch doesn't address that scenario; the signal handling
while waiting for the startup packet is more complicated. But at least this
alleviates similar problems in the SIGQUIT handlers, like that reported
by Asim R P later in the same thread.
Backpatch to 9.3 (all supported versions).
Discussion: https://www.postgresql.org/message-id/CAOMx_OAuRUHiAuCg2YgicZLzPVv5d9_H4KrL_OFsFP%3DVPekigA%40mail.gmail.com
Commit 1c2cb2744 added some code that tried to detect whether two
RelOptInfos were the "same" rel by pointer comparison; but it turns
out that inheritance_planner breaks that, through its shenanigans
with copying some relations forward into new subproblems. Compare
relid sets instead. Add a regression test case to exercise this
area.
Problem reported by Rushabh Lathia; diagnosis and fix by Amit Langote,
modified a bit by me.
Discussion: https://postgr.es/m/CAGPqQf3anJGj65bqAQ9edDr8gF7qig6_avRgwMT9MsZ19COUPw@mail.gmail.com
CreateUserMapping has a recordDependencyOnCurrentExtension call that's
been there since extensions were introduced (very possibly my fault).
However, there's no support anywhere else for user mappings as members
of extensions, nor are they listed as a possible member object type in
the documentation. Nor does it really seem like a good idea for user
mappings to belong to extensions when roles don't. Hence, remove the
bogus call.
(As we saw in bug #15310, the lack of any pg_dump support for this case
ensures that any such membership record would silently disappear during
pg_upgrade. So there's probably no need for us to do anything else
about cleaning up after this mistake.)
Discussion: https://postgr.es/m/27952.1533667213@sss.pgh.pa.us
Since commit c8e8b5a6e, this has been zeroed out using the wrong length.
In practice the length would always be too small, leading to not zeroing
the whole buffer rather than clobbering additional memory; and that's
pretty harmless, both because shmem would likely start out as zeroes
and because we'd reinitialize any given entry before use. Still,
it's bogus, so fix it.
Reported by Petru-Florin Mihancea (bug #15312)
Discussion: https://postgr.es/m/153363913073.1303.6518849192351268091@wrigleys.postgresql.org
There are some problems with the tls-unique channel binding type. It's not
supported by all SSL libraries, and strictly speaking it's not defined for
TLS 1.3 at all, even though at least in OpenSSL, the functions used for it
still seem to work with TLS 1.3 connections. And since we had no
mechanism to negotiate what channel binding type to use, there would be
awkward interoperability issues if a server only supported some channel
binding types. tls-server-end-point seems feasible to support with any SSL
library, so let's just stick to that.
This removes the scram_channel_binding libpq option altogether, since there
is now only one supported channel binding type.
This also removes all the channel binding tests from the SSL test suite.
They were really just testing the scram_channel_binding option, which
is now gone. Channel binding is used if both client and server support it,
so it is used in the existing tests. It would be good to have some tests
specifically for channel binding, to make sure it really is used, and the
different combinations of a client and a server that support or doesn't
support it. The current set of settings we have make it hard to write such
tests, but I did test those things manually, by disabling
HAVE_BE_TLS_GET_CERTIFICATE_HASH and/or
HAVE_PGTLS_GET_PEER_CERTIFICATE_HASH.
I also removed the SCRAM_CHANNEL_BINDING_TLS_END_POINT constant. This is a
matter of taste, but IMO it's more readable to just use the
"tls-server-end-point" string.
Refactor the checks on whether the SSL library supports the functions
needed for tls-server-end-point channel binding. Now the server won't
advertise, and the client won't choose, the SCRAM-SHA-256-PLUS variant, if
compiled with an OpenSSL version too old to support it.
In the passing, add some sanity checks to check that the chosen SASL
mechanism, SCRAM-SHA-256 or SCRAM-SHA-256-PLUS, matches whether the SCRAM
exchange used channel binding or not. For example, if the client selects
the non-channel-binding variant SCRAM-SHA-256, but in the SCRAM message
uses channel binding anyway. It's harmless from a security point of view,
I believe, and I'm not sure if there are some other conditions that would
cause the connection to fail, but it seems better to be strict about these
things and check explicitly.
Discussion: https://www.postgresql.org/message-id/ec787074-2305-c6f4-86aa-6902f98485a4%40iki.fi
When expanding an updatable view that is an INSERT's target, the rewriter
failed to rewrite Vars in the ON CONFLICT UPDATE clause. This accidentally
worked if the view was just "SELECT * FROM ...", as the transformation
would be a no-op in that case. With more complicated view targetlists,
this omission would often lead to "attribute ... has the wrong type" errors
or even crashes, as reported by Mario De Frutos Dieguez.
Fix by adding code to rewriteTargetView to fix up the data structure
correctly. The easiest way to update the exclRelTlist list is to rebuild
it from scratch looking at the new target relation, so factor the code
for that out of transformOnConflictClause to make it sharable.
In passing, avoid duplicate permissions checks against the EXCLUDED
pseudo-relation, and prevent useless view expansion of that relation's
dummy RTE. The latter is only known to happen (after this patch) in cases
where the query would fail later due to not having any INSTEAD OF triggers
for the view. But by exactly that token, it would create an unintended
and very poorly tested state of the query data structure, so it seems like
a good idea to prevent it from happening at all.
This has been broken since ON CONFLICT was introduced, so back-patch
to 9.5.
Dean Rasheed, based on an earlier patch by Amit Langote;
comment-kibitzing and back-patching by me
Discussion: https://postgr.es/m/CAFYwGJ0xfzy8jaK80hVN2eUWr6huce0RU8AgU04MGD00igqkTg@mail.gmail.com
6cb3372 enforces errno to ENOSPC when less bytes than what is expected
have been written when it is unset, though it forgot to properly reset
errno before doing a system call to write(), causing errno to
potentially come from a previous system call.
Reported-by: Tom Lane
Author: Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/31797.1533326676@sss.pgh.pa.us
It's necessary to make sure that owning tables have a relcache
invalidation prior to advancing the command counter to make
newly-entered catalog tuples for the index visible. inval.c must be
able to maintain the consistency of the local caches in the event of
transaction abort. There is usually only a problem when CREATE INDEX
transactions abort, since there is a generic invalidation once we reach
index_update_stats().
This bug is of long standing. Problems were made much more likely by
the addition of parallel CREATE INDEX (commit 9da0cc3528), but it is
strongly suspected that similar problems can be triggered without
involving plan_create_index_workers(). (plan_create_index_workers()
triggers a relcache build or rebuild, which previously only happened in
rare edge cases.)
Author: Peter Geoghegan
Reported-By: Luca Ferrari
Diagnosed-By: Andres Freund
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CAKoxK+5fVodiCtMsXKV_1YAKXbzwSfp7DgDqUmcUAzeAhf=HEQ@mail.gmail.com
Backpatch: 9.3-
The buffer usage stats is accounted only for the execution phase of the
node. For Gather and Gather Merge nodes, such stats are accumulated at
the time of shutdown of workers which is done after execution of node due
to which we missed to account them for such nodes. Fix it by treating
nodes as running while we shut down them.
We can also miss accounting for a Limit node when Gather or Gather Merge
is beneath it, because it can finish the execution before shutting down
such nodes. So we allow a Limit node to shut down the resources before it
completes the execution.
In the passing fix the gather node code to allow workers to shut down as
soon as we find that all the tuples from the workers have been retrieved.
The original code use to do that, but is accidently removed by commit
01edb5c7fc.
Reported-by: Adrien Nayrat
Author: Amit Kapila and Robert Haas
Reviewed-by: Robert Haas and Andres Freund
Backpatch-through: 9.6 where this code was introduced
Discussion: https://postgr.es/m/86137f17-1dfb-42f9-7421-82fd786b04a1@anayrat.info
In the leader backend, we don't track the buffer usage for ExecutorStart
phase whereas in worker backend we track it for ExecutorStart phase as
well. This leads to different value for buffer usage stats for the
parallel and non-parallel query. Change the code so that worker backend
also starts tracking buffer usage after ExecutorStart.
Author: Amit Kapila and Robert Haas
Reviewed-by: Robert Haas and Andres Freund
Backpatch-through: 9.6 where this code was introduced
Discussion: https://postgr.es/m/86137f17-1dfb-42f9-7421-82fd786b04a1@anayrat.info
The previous coding here supposed that if run-time partitioning applied to
a particular Append/MergeAppend plan, then all child plans of that node
must be members of a single partitioning hierarchy. This is totally wrong,
since an Append could be formed from a UNION ALL: we could have multiple
hierarchies sharing the same Append, or child plans that aren't part of any
hierarchy.
To fix, restructure the related plan-time and execution-time data
structures so that we can have a separate list or array for each
partitioning hierarchy. Also track subplans that are not part of any
hierarchy, and make sure they don't get pruned.
Per reports from Phil Florent and others. Back-patch to v11, since
the bug originated there.
David Rowley, with a lot of cosmetic adjustments by me; thanks also
to Amit Langote for review.
Discussion: https://postgr.es/m/HE1PR03MB17068BB27404C90B5B788BCABA7B0@HE1PR03MB1706.eurprd03.prod.outlook.com
This was broken in commit 9c7d06d606, which inadvertently gave the
wrong value to fast_forward in one StartupDecodingContext call. Fix by
flipping the value. Add a test for the obvious error, namely trying to
initialize a replication slot with an nonexistent output plugin.
While at it, move the CreateDecodingContext call earlier, so that any
errors are reported before sending the CopyBoth message.
Author: Dave Cramer <davecramer@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CADK3HHLVkeRe1v4P02-5hj55H3_yJg3AEtpXyEY5T3wuzO2jSg@mail.gmail.com
Some operations were being done in a longer-lived memory context,
causing intra-query leaks. It's not noticeable unless you're doing a
large COPY, but if you are, it eats enough memory to cause a problem.
Co-authored-by: Kohei KaiGai <kaigai@heterodb.com>
Co-authored-by: Amit Langote <Langote_Amit_f8@lab.ntt.co.jp>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/CAOP8fzYtVFWZADq4c=KoTAqgDrHWfng+AnEPEZccyxqxPVbbWQ@mail.gmail.com
CopyFrom allows multi-inserts to be used for non-partitioned tables, but
this was disabled for partitioned tables. The reason for this appeared
to be that the tuple may not belong to the same partition as the
previous tuple did. Not allowing multi-inserts here greatly slowed down
imports into partitioned tables. These could take twice as long as a
copy to an equivalent non-partitioned table. It seems wise to do
something about this, so this change allows the multi-inserts by
flushing the so-far inserted tuples to the partition when the next tuple
does not belong to the same partition, or when the buffer fills. This
improves performance when the next tuple in the stream commonly belongs
to the same partition as the previous tuple.
In cases where the target partition changes on every tuple, using
multi-inserts slightly slows the performance. To get around this we
track the average size of the batches that have been inserted and
adaptively enable or disable multi-inserts based on the size of the
batch. Some testing was done and the regression only seems to exist
when the average size of the insert batch is close to 1, so let's just
enable multi-inserts when the average size is at least 1.3. More
performance testing might reveal a better number for, this, but since
the slowdown was only 1-2% it does not seem critical enough to spend too
much time calculating it. In any case it may depend on other factors
rather than just the size of the batch.
Allowing multi-inserts for partitions required a bit of work around the
per-tuple memory contexts as we must flush the tuples when the next
tuple does not belong the same partition. In which case there is no
good time to reset the per-tuple context, as we've already built the new
tuple by this time. In order to work around this we maintain two
per-tuple contexts and just switch between them every time the partition
changes and reset the old one. This does mean that the first of each
batch of tuples is not allocated in the same memory context as the
others, but that does not matter since we only reset the context once
the previous batch has been inserted.
Author: David Rowley <david.rowley@2ndquadrant.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Commits 742869946 et al turn out to be a couple bricks shy of a load.
We were dumping the stored values of GUC_LIST_QUOTE variables as they
appear in proconfig or setconfig catalog columns. However, although that
quoting rule looks a lot like SQL-identifier double quotes, there are two
critical differences: empty strings ("") are legal, and depending on which
variable you're considering, values longer than NAMEDATALEN might be valid
too. So the current technique fails altogether on empty-string list
entries (as reported by Steven Winfield in bug #15248) and it also risks
truncating file pathnames during dump/reload of GUC values that are lists
of pathnames.
To fix, split the stored value without any downcasing or truncation,
and then emit each element as a SQL string literal.
This is a tad annoying, because we now have three copies of the
comma-separated-string splitting logic in varlena.c as well as a fourth
one in dumputils.c. (Not to mention the randomly-different-from-those
splitting logic in libpq...) I looked at unifying these, but it would
be rather a mess unless we're willing to tweak the API definitions of
SplitIdentifierString, SplitDirectoriesString, or both. That might be
worth doing in future; but it seems pretty unsafe for a back-patched
bug fix, so for now accept the duplication.
Back-patch to all supported branches, as the previous fix was.
Discussion: https://postgr.es/m/7585.1529435872@sss.pgh.pa.us
In commit 84940644de, bms_add_range was added with an API to fail with
an error if an empty range was specified. This seems arbitrary and
unhelpful, so turn that case into a no-op instead. Callers that require
further verification on the arguments or result can apply them by
themselves.
This fixes the bug that partition pruning throws an API error for a case
involving the default partition of a default partition, as in the
included test case.
Reported-by: Rajkumar Raghuwanshi <rajkumar.raghuwanshi@enterprisedb.com>
Diagnosed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/16590.1532622503@sss.pgh.pa.us
This allows querying the SSL implementation used on the server side.
It's analogous to using PQsslAttribute(conn, "library") in libpq.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Perpendicular lines always intersect, so the line_interpt_line() return
value in line_closept_point() was used only in an assertion, triggering
compiler warnings in non-assert builds.
Commit a7dc63d904 inadvertedly removed this bit originally introduced
by 43fe90f66a, causing regression test failures on some platforms,
due to producing {1,-1,-0} instead of {1,-1,0}.
The recheck option became a no-op as ClusterOption failed to set proper
values for each element. There was a second code path where local
options got overwritten.
Both issues have been spotted by Coverity.
Commit 5770172cb0 documented secure schema
usage, and that advice suffices for using unqualified names securely.
Document, in typeconv-func primarily, the additional issues that arise
with qualified names. Back-patch to 9.3 (all supported versions).
Reviewed by Jonathan S. Katz.
Discussion: https://postgr.es/m/20180721012446.GA1840594@rfd.leadboat.com
Some data types under adt/ have separate header files, but most simple
ones do not, and their public functions are defined in builtins.h. As
the patches improving geometric types will require making additional
functions public, this seems like a good opportunity to create a header
for floats types.
Commit 1acf757255 made _cmp functions public to solve NaN issues locally
for GiST indexes. This patch reworks it in favour of a more widely
applicable API. The API uses inline functions, as they are easier to
use compared to macros, and avoid double-evaluation hazards.
Author: Emre Hasegeli
Reviewed-by: Kyotaro Horiguchi
Discussion: https://www.postgresql.org/message-id/CAE2gYzxF7-5djV6-cEvqQu-fNsnt%3DEqbOURx7ZDg%2BVv6ZMTWbg%40mail.gmail.com
The primary goal of this patch is to eliminate duplicate code and share
code between different geometric data types more often, to prepare the
ground for additional patches. Until now the code reuse was limited,
probably because the simpler types (line and point) were implemented
after the more complex ones.
The changes are quite extensive and can be summarised as:
* Eliminate SQL-level function calls.
* Re-use more functions to implement others.
* Unify internal function names and signatures.
* Remove private functions from geo_decls.h.
* Replace should-not-happen checks with assertions.
* Add comments describe for various functions.
* Remove some unreachable code.
* Define delimiter symbols of line datatype like the other ones.
* Remove the GEODEBUG macro and printf() calls.
* Unify code style of a few oddly formatted lines.
While the goal was to cause minimal user-visible changes, it was not
possible to keep the original behavior in all cases - for example when
handling NaN values, or when reusing code makes the functions return
consistent results.
Author: Emre Hasegeli
Reviewed-by: Kyotaro Horiguchi, me
Discussion: https://www.postgresql.org/message-id/CAE2gYzxF7-5djV6-cEvqQu-fNsnt%3DEqbOURx7ZDg%2BVv6ZMTWbg%40mail.gmail.com
In our B-tree implementation appropriate leaf page for new tuple
insertion is acquired using _bt_search() function. This function always
returns leaf page locked in shared mode. In order to obtain exclusive
lock, caller have to relock the page.
This commit makes _bt_search() function lock leaf page immediately in
exclusive mode when needed. That removes unnecessary relock and, in
turn reduces lock contention for B-tree leaf pages. Our experiments
on multi-core systems showed acceleration up to 4.5 times in corner
case.
Discussion: https://postgr.es/m/CAPpHfduAMDFMNYTCN7VMBsFg_hsf0GqiqXnt%2BbSeaJworwFoig%40mail.gmail.com
Author: Alexander Korotkov
Reviewed-by: Yoshikazu Imai, Simon Riggs, Peter Geoghegan
Instead of repeatedly fishing the data out of the relcache entry,
let's use the version that we cached in the PartitionDispatch. We
could alternatively rip out the PartitionDispatch fields altogether,
but it doesn't make much sense to have them and not use them; before
this patch, partdesc was set but altogether unused. Amit Langote and
I both thought using them was a litle better than removing them, so
this patch takes that approach.
Discussion: http://postgr.es/m/CA+TgmobFnxcaW-Co-XO8=yhJ5pJXoNkCj6Z7jm9Mwj9FGv-D7w@mail.gmail.com
During parallel index scans, if the current page to be read is deleted, we
skip it and try to get the next page for a scan without releasing the buffer
lock on the current page. To get the next page, sometimes it needs to wait
for another process to complete its scan and advance it to the next page.
Now, it is quite possible that the master backend has errored out before
advancing the scan and issued a termination signal for all workers. The
workers failed to notice the termination request during wait because the
interrupts are held due to buffer lock on the previous page. This lead to
all workers being stuck.
The fix is to release the buffer lock on current page before trying to get
the next page. We are already doing same in backward scans, but missed
it for forward scans.
Reported-by: Victor Yegorov
Bug: 15290
Diagnosed-by: Thomas Munro and Amit Kapila
Author: Amit Kapila
Reviewed-by: Thomas Munro
Tested-By: Thomas Munro and Victor Yegorov
Backpatch-through: 10 where parallel index scans were introduced
Discussion: https://postgr.es/m/153228422922.1395.1746424054206154747@wrigleys.postgresql.org
Tom Lane
Peter Eisentraut
Michael Paquier
Amit Kapila
Andrew Gierth
Andrew Dunstan
Peter Geoghegan
Alexander Korotkov
Heikki Linnakangas
Alvaro Herrera
Tomas Vondra
Noah Misch
Robert Haas