what a Var node refers to. This is no longer necessary because the new
flat-range-table representation of plan trees makes it relatively easy to dig
down through child plan levels to find the original reference; and to keep
doing it that way, we'd have to store joinaliasvars lists in flattened RTEs,
as demonstrated by bug report from Leszek Trenkner. This change makes
varnoold/varoattno truly just debug aids, which wasn't quite the case before.
Perhaps we should drop them, or only have them in assert-enabled builds?
in cases where a sub-SELECT inserts a WHERE clause between two outer joins,
that clause may prevent us from re-ordering the two outer joins. The code
was considering only the joins' own ON-conditions in determining reordering
safety, which is not good enough. Add a "delay_upper_joins" flag to
OuterJoinInfo to flag that we have detected such a clause and higher-level
outer joins shouldn't be permitted to commute with this one. (This might
seem overly coarse, but given the current rules for OJ reordering, it's
sufficient AFAICT.)
The failure case is actually pretty narrow: it needs a WHERE clause within
the RHS of a left join that checks the RHS of a lower left join, but is not
strict for that RHS (else we'd have simplified the lower join to a plain
join). Even then no failure will be manifest unless the planner chooses to
rearrange the join order.
Per bug report from Adam Terrey.
cheapest-startup-cost innerjoin indexscans, and make joinpath.c consider
both of these (when different) as the inside of a nestloop join. The
original design was based on the assumption that indexscan paths always
have negligible startup cost, and so total cost is the only important
figure of merit; an assumption that's obviously broken by bitmap
indexscans. This oversight could lead to choosing poor plans in cases
where fast-start behavior is more important than total cost, such as
LIMIT and IN queries. 8.1-vintage brain fade exposed by an example from
Chuck D.
is using mark/restore but not rewind or backward-scan capability. Insert a
materialize plan node between a mergejoin and its inner child if the inner
child is a sort that is expected to spill to disk. The materialize shields
the sort from the need to do mark/restore and thereby allows it to perform
its final merge pass on-the-fly; while the materialize itself is normally
cheap since it won't spill to disk unless the number of tuples with equal
key values exceeds work_mem.
Greg Stark, with some kibitzing from Tom Lane.
- Function renamed to "xpath".
- Function is now strict, per discussion.
- Return empty array in case when XPath expression detects nothing
(previously, NULL was returned in such case), per discussion.
- (bugfix) Work with fragments with prologue: select xpath('/a',
'<?xml version="1.0"?><a /><b />'); // now XML datum is always wrapped
with dummy <x>...</x>, XML prologue simply goes away (if any).
- Some cleanup.
Nikolay Samokhvalov
Some code cleanup and documentation work by myself.
WAL records that shows whether it is safe to remove full-page images
(ie, whether or not an on-line backup was in progress when the WAL entry
was made). Also make provision for an XLOG_NOOP record type that can be
used to fill in the extra space when decompressing the data for restore.
This is the portion of Koichi Suzuki's "full page writes" patch that
has to go into the core database. The remainder of that work is two
external compression and decompression programs, which for the time being
will undergo separate development on pgfoundry. Per discussion.
Also, twiddle the handling of BTREE_SPLIT records to ensure it'll be
possible to compress them (the previous coding caused essential info
to be omitted). The other commonly-used record types seem OK already,
with the possible exception of GIN and GIST WAL records, which I don't
understand well enough to opine on.
FreezeXid introduced in a recent commit, so there isn't any data loss in this
approach.
Doing it causes ALTER TABLE (or rather, the forms of it that cause a full table
rewrite) to be affected as well. In this case, the frozen point is RecentXmin,
because after the rewrite all the tuples are relabeled with the rewriting
transaction's Xid.
TOAST tables are fixed automatically as well, as fallout of the way they were
already being handled in the respective code paths.
With this patch, there is no longer need to VACUUM tables for Xid wraparound
purposes that have been cleaned up via TRUNCATE or CLUSTER.
had been taught not to do that ages ago, the SSL code was helpfully bleating
anyway. Resolves some recent reports such as bug #3266; however the
underlying cause of the related bug #2829 is still unclear.
and inet_server_addr() fail if the client connected over a "scoped" IPv6
address. In this case getnameinfo() will return a string ending with
a poorly-standardized "%something" zone specifier, which these functions
try to feed to network_in(), which won't take it. So that we don't lose
functionality altogether, suppress the zone specifier before giving the
string to network_in(). Per report from Brian Hirt.
TODO: probably someday the inet type should support scoped IPv6 addresses,
and then this patch should be reverted.
Backpatch to 8.2 ... is it worth going further?
recompute the limit/offset immediately, so that the updated values are
available when the child's ReScan function is invoked. Add a regression
test for this, too. Bug is new in HEAD (due to the bounded-sorting patch)
so no need for back-patch.
I did not do anything about merging this signaling with chgParam processing,
but if we were to do that we'd still need to compute the updated values
at this point rather than during the first ProcNode call.
Per observation and test case from Greg Stark, though I didn't use his patch.
to avoid losing useful Xid information in not-so-old tuples. This makes
CLUSTER behave the same as VACUUM as far a tuple-freezing behavior goes
(though CLUSTER does not yet advance the table's relfrozenxid).
While at it, move the actual freezing operation in rewriteheap.c to a more
appropriate place, and document it thoroughly. This part of the patch from
Tom Lane.
avoid a later needless VACUUM for Xid-wraparound purposes. We can do this
since the table is known to be left empty, so no Xid remains on it.
Per discussion.
applied to live tuples older than a recent Xmin, not to tuples that may be part
of an update chain. Those still keep their original markings.
This patch makes it possible for CLUSTER to advance relfrozenxid, thus avoiding
the need of vacuuming the table for Xid wraparound purposes. That will be
patched separately.
Patch from Heikki Linnakangas.
there's an indirect dependency on the owner via the parent table. We were
already handling indexes that way, but not toast tables for some reason.
Saves a little catalog space and cuts down the verbosity of checkSharedDependencies
reports.
ActiveSnapshot. Having it affect ActiveSnapshot only in the unusual
case of needing to replan seems a bad idea, and there's also the problem
that the created snap might be in a relatively short-lived context, as
noted by Jan Wieck. Also, there's no need to force a new snap at all
unless we are called with no snap currently set, which is an unusual
case in itself.
and only a truncated log of the objects in the current database to the client.
Also, instead of reporting object counts for all databases on which the user
might own objects, report only as many as fit in the predefined line count.
This is to avoid flooding the client when the user owns too many objects,
which could cause problems.
Per report from Ed L. on April 4th and subsequent discussion.
more completely. The motivation for having it understand IS NULL at all was
to allow use of "foo IS NULL" as one of the subsets of a partitioning on
"foo", but as reported by Aleksander Kmetec, it wasn't really getting the job
done. Backpatch to 8.2 since this is arguably a performance bug.
named foo, would work but the other ordering would not. If a user-specified
type or table name collides with an existing auto-generated array name, just
rename the array type out of the way by prepending more underscores. This
should not create any backward-compatibility issues, since the cases in which
this will happen would have failed outright in prior releases.
Also fix an oversight in the arrays-of-composites patch: ALTER TABLE RENAME
renamed the table's rowtype but not its array type.
needs to check the new constraint against columns of derived domains too.
Also, make it error out if the domain to be modified is used within any
composite-type columns. Eventually we should support that case, but it seems
a bit painful, and not suitable for a back-patch. For the moment just let the
user know we can't do it.
Backpatch to 8.2, which is the only released version that allows nested
domains. Possibly the other part should be back-patched further.
and views (but not system catalogs, nor sequences or toast tables). Get rid
of the hardwired convention that a type's array type is named exactly "_type",
instead using a new column pg_type.typarray to provide the linkage. (It still
will be named "_type", though, except in odd corner cases such as
maximum-length type names.)
Along the way, make tracking of owner and schema dependencies for types more
uniform: a type directly created by the user has these dependencies, while a
table rowtype or auto-generated array type does not have them, but depends on
its parent object instead.
David Fetter, Andrew Dunstan, Tom Lane
numerics as "oprcanhash", and make the corresponding system catalog
updates. As a result, hash indexes, hashed aggregation, and hash
joins can now be used with the numeric type. Bump the catversion.
The only tricky aspect to doing this is writing a correct hash
function: it's possible for two Numerics to be equal according to
their equality operator, but have different in-memory bit patterns.
To cope with this, the hash function doesn't consider the Numeric's
"scale" or "sign", and explictly skips any leading or trailing
zeros in the Numeric's digit buffer (the current implementation
should suppress any such zeros, but it seems unwise to rely upon
this). See discussion on pgsql-patches for more details.
and for other compilers, insert a dummy exit() call so that they understand
PG_RE_THROW() doesn't return. Insert fflush(stderr) in ExceptionalCondition,
per recent buildfarm evidence that that might not happen automatically on some
platforms. And const-ify ExceptionalCondition's declaration while at it.
need be returned. We keep a heap of the current best N tuples and sift-up
new tuples into it as we scan the input. For M input tuples this means
only about M*log(N) comparisons instead of M*log(M), not to mention a lot
less workspace when N is small --- avoiding spill-to-disk for large M
is actually the most attractive thing about it. Patch includes planner
and executor support for invoking this facility in ORDER BY ... LIMIT
queries. Greg Stark, with some editorialization by moi.
pages it intends to zero immediately. Just to show there is some use for that
function besides WAL recovery :-).
Along the way, fold _hash_checkpage and _hash_pageinit calls into _hash_getbuf
and friends, instead of expecting callers to do that separately.
ReadOrZeroBuffer to fetch pages from beyond physical EOF. This would
usually work, but would cause problems for md.c if writes occurred
beyond a segment boundary when the previous segment file hadn't been
fully extended.
from the WAL data, don't bother to physically read it; just have bufmgr.c
return a zeroed-out buffer instead. This speeds recovery significantly,
and also avoids unnecessary failures when a page-to-be-overwritten has corrupt
page headers on disk. This replaces a former kluge that accomplished the
latter by pretending zero_damaged_pages was always ON during WAL recovery;
which was OK when the kluge was put in, but is unsafe when restoring a WAL
log that was written with full_page_writes off.
Heikki Linnakangas
true at the very end of its processing, the update is broadcast via a
shared-cache-inval message for the index; without this, existing backends that
already have relcache entries for the index might never see it become valid.
Also, force a relcache inval on the index's parent table at the same time,
so that any cached plans for that table are re-planned; this ensures that
the newly valid index will be used if appropriate. Aside from making
C.I.C. behave more reasonably, this is necessary infrastructure for some
aspects of the HOT patch. Pavan Deolasee, with a little further stuff from
me.
and TimestampDifference, to make coding clearer. I think this should also fix
the failure to start workers in platforms with low resolution timers, as
reported by Itagaki Takahiro.
isn't any place to throw the error to. If so, we should treat the error
as FATAL, just as we would have if it'd been thrown outside the PG_TRY
block to begin with.
Although this is clearly a *potential* source of bugs, it is not clear
at the moment whether it is an *actual* source of bugs; there may not
presently be any PG_TRY blocks in code that can be reached with no outer
longjmp catcher. So for the moment I'm going to be conservative and not
back-patch this. The change breaks ABI for users of PG_RE_THROW and hence
might create compatibility problems for loadable modules, so we should not
put it into released branches without proof that it's needed.
wrong thing when inlining polymorphic SQL functions, because it was using the
function's declared return type where it should have used the actual result
type of the current call. In 8.1 and 8.2 this causes obvious failures even if
you don't have assertions turned on; in 8.0 and 7.4 it would only be a problem
if the inlined expression were used as an input to a function that did
run-time type determination on its inputs. Add a regression test, since this
is evidently an under-tested area.
from time_t to TimestampTz representation. This provides full gettimeofday()
resolution of the timestamps, which might be useful when attempting to
do point-in-time recovery --- previously it was not possible to specify
the stop point with sub-second resolution. But mostly this is to get
rid of TimestampTz-to-time_t conversion overhead during commit. Per my
proposal of a day or two back.
messages to the stats collector. This avoids the problem that enabling
stats_row_level for autovacuum has a significant overhead for short
read-only transactions, as noted by Arjen van der Meijden. We can avoid
an extra gettimeofday call by piggybacking on the one done for WAL-logging
xact commit or abort (although that doesn't help read-only transactions,
since they don't WAL-log anything).
In my proposal for this, I noted that we could change the WAL log entries
for commit/abort to record full TimestampTz precision, instead of only
time_t as at present. That's not done in this patch, but will be committed
separately.
We can just palloc, instead of using makeNode, when we are going to
overwrite the whole node anyway in the FLATCOPY macro. Also, use
FLATCOPY instead of copyObject for common node types Var and Const.
look through a freelist for a chunk of adequate size. For a long time
now, all elements of a given freelist have been exactly the same
allocated size, so we don't need a loop. Since the loop never iterated
more than once, you'd think this wouldn't matter much, but it makes a
noticeable savings in a simple test --- perhaps because the compiler
isn't optimizing on a mistaken assumption that the loop would repeat.
AllocSetAlloc is called often enough that saving even a couple of
instructions is worthwhile.
types of unspecified parameters when submitted via extended query protocol.
This worked in 8.2 but I had broken it during plancache changes. DECLARE
CURSOR is now treated almost exactly like a plain SELECT through parse
analysis, rewrite, and planning; only just before sending to the executor
do we divert it away to ProcessUtility. This requires a special-case check
in a number of places, but practically all of them were already special-casing
SELECT INTO, so it's not too ugly. (Maybe it would be a good idea to merge
the two by treating IntoClause as a form of utility statement? Not going to
worry about that now, though.) That approach doesn't work for EXPLAIN,
however, so for that I punted and used a klugy solution of running parse
analysis an extra time if under extended query protocol.
is in progress on the same hashtable. This seems the least invasive way to
fix the recently-recognized problem that a split could cause the scan to
visit entries twice or (with much lower probability) miss them entirely.
The only field-reported problem caused by this is the "failed to re-find
shared lock object" PANIC in COMMIT PREPARED reported by Michel Dorochevsky,
which was caused by multiply visited entries. However, it seems certain
that mdsync() is vulnerable to missing required fsync's due to missed
entries, and I am fearful that RelationCacheInitializePhase2() might be at
risk as well. Because of that and the generalized hazard presented by this
bug, back-patch all the supported branches.
Along the way, fix pg_prepared_statement() and pg_cursor() to not assume
that the hashtables they are examining will stay static between calls.
This is risky regardless of the newly noted dynahash problem, because
hash_seq_search() has never promised to cope with deletion of table entries
other than the just-returned one. There may be no bug here because the only
supported way to call these functions is via ExecMakeTableFunctionResult()
which will cycle them to completion before doing anything very interesting,
but it seems best to get rid of the assumption. This affects 8.2 and HEAD
only, since those functions weren't there earlier.
RESET SESSION, RESET PLANS, and RESET TEMP are now DISCARD ALL,
DISCARD PLANS, and DISCARD TEMP, respectively. This is to avoid
confusion with the pre-existing RESET variants: the DISCARD
commands are not actually similar to RESET. Patch from Marko
Kreen, with some minor editorialization.
(it's so nice to have a buildfarm member that actively rejects naked
uses of strcasecmp). This coding is still pretty awful, though, since
it's going to be O(N^2) in the number of guc variables. May I direct
your attention to bsearch?
are mostly excluded by constraints: do the CE test a bit earlier to save
some adjust_appendrel_attrs() work on excluded children, and arrange to
use array indexing rather than rt_fetch() to fetch RTEs in the main body
of the planner. The latter is something I'd wanted to do for awhile anyway,
but seeing list_nth_cell() as 35% of the runtime gets one's attention.
Tom Lane
Peter Eisentraut
Alvaro Herrera
Neil Conway
Magnus Hagander