pread() and pwrite() are in SUSv2, and all targeted Unix systems have
them.
Previously, we defined pg_pread and pg_pwrite to emulate these function
with lseek() on old Unixen. The names with a pg_ prefix were a reminder
of a portability hazard: they might change the current file position.
That hazard is gone, so we can drop the prefixes.
Since the remaining replacement code is Windows-only, move it into
src/port/win32p{read,write}.c, and move the declarations into
src/include/port/win32_port.h.
No need for vestigial HAVE_PREAD, HAVE_PWRITE macros as they were only
used for declarations in port.h which have now moved into win32_port.h.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Greg Stark <stark@mit.edu>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ3LHeP9w5Fgzdr4G8AnEtJ=z=p6hGDEm4qYGEUX5B6fQ@mail.gmail.com
setenv() and unsetenv() are in SUSv3 and targeted Unix systems have
them. We still need special code for these on Windows, but that doesn't
require a configure probe.
This marks the first time we require a SUSv3 (POSIX.1-2001) facility
(rather than SUSv2). The replacement code removed here was not needed
on any targeted system or any known non-EOL'd Unix system, and was
therefore dead and untested.
No need for vestigial HAVE_SETENV and HAVE_UNSETENV macros, because we
provide a replacement for Windows, and we didn't previously test the
macros.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Greg Stark <stark@mit.edu>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ3LHeP9w5Fgzdr4G8AnEtJ=z=p6hGDEm4qYGEUX5B6fQ@mail.gmail.com
poll() and <poll.h> are in SUSv2 and all targeted Unix systems have
them.
Retain HAVE_POLL and HAVE_POLL_H macros for readability. There's an
error in latch.c that is now unreachable (since we always have one of
WIN32 or HAVE_POLL defined), but that falls out of a decision to keep
using defined(HAVE_POLL) instead of !defined(WIN32) to guard the poll()
code.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ3LHeP9w5Fgzdr4G8AnEtJ=z=p6hGDEm4qYGEUX5B6fQ@mail.gmail.com
link() is in SUSv2 and all targeted Unix systems have it. We have
replacement code for Windows that doesn't require a configure probe.
Since only Windows needs it, rename src/port/link.c to win32link.c like
other similar things.
There is no need for a vestigial HAVE_LINK macro, because we expect all
Unix and, with our replacement function, Windows systems to have it, so
we didn't have any tests around link() usage.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ3LHeP9w5Fgzdr4G8AnEtJ=z=p6hGDEm4qYGEUX5B6fQ@mail.gmail.com
symlink() and readlink() are in SUSv2 and all targeted Unix systems have
them. We have partial emulation on Windows. Code that raised runtime
errors on systems without it has been dead for years, so we can remove
that and also references to such systems in the documentation.
Define HAVE_READLINK and HAVE_SYMLINK macros on Unix. Our Windows
replacement functions based on junction points can't be used for
relative paths or for non-directories, so the macros can be used to
check for full symlink support. The places that deal with tablespaces
can just use symlink functions without checking the macros. (If they
did check the macros, they'd need to provide an #else branch with a
runtime or compile time error, and it'd be dead code.)
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ3LHeP9w5Fgzdr4G8AnEtJ=z=p6hGDEm4qYGEUX5B6fQ@mail.gmail.com
setsid() is in SUSv2 and all targeted Unix systems have it. Retain a
HAVE_SETSID macro, defined on Unix only. That's easier to understand
than !defined(WIN32), for the optional code it governs.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ3LHeP9w5Fgzdr4G8AnEtJ=z=p6hGDEm4qYGEUX5B6fQ@mail.gmail.com
shm_open() is in SUSv2 and all targeted Unix systems have it.
We retain a HAVE_SHM_OPEN macro, because it's clearer to readers than
something like !defined(WIN32).
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ3LHeP9w5Fgzdr4G8AnEtJ=z=p6hGDEm4qYGEUX5B6fQ@mail.gmail.com
getrlimit() is in SUSv2 and all targeted systems have it.
Windows doesn't have it. We could just use #ifndef WIN32, but for a
little more explanation about why we're making things conditional, let's
retain the HAVE_GETRLIMIT macro. It's defined in port.h for Unix systems.
On systems that have it, it's not necessary to test for RLIMIT_CORE,
RLIMIT_STACK or RLIMIT_NOFILE macros, since SUSv2 requires those and all
targeted systems have them. Also remove references to a pre-historic
alternative spelling of RLIMIT_NOFILE, and coding that seemed to believe
that Cygwin didn't have it.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ3LHeP9w5Fgzdr4G8AnEtJ=z=p6hGDEm4qYGEUX5B6fQ@mail.gmail.com
dlopen() is in SUSv2 and all targeted Unix systems have it. We still
need replacement functions for Windows, but we don't need a configure
probe for that.
Since it's no longer needed by other operating systems, rename dlopen.c
to win32dlopen.c and move the declarations into win32_port.h.
Likewise, the macros RTLD_NOW and RTLD_GLOBAL now only need to be
defined on Windows, since all targeted Unix systems have 'em.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ3LHeP9w5Fgzdr4G8AnEtJ=z=p6hGDEm4qYGEUX5B6fQ@mail.gmail.com
sigwait() is in SUSv2 and all targeted Unix systems have it. An earlier
pre-standard function prototype existed on some older systems, but we
no longer need a workaround for that.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Greg Stark <stark@mit.edu>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CA+hUKGJ3LHeP9w5Fgzdr4G8AnEtJ=z=p6hGDEm4qYGEUX5B6fQ@mail.gmail.com
getrusage() is in SUSv2 and all targeted Unix systems have it.
Note that POSIX only covers ru_utime and ru_stime and we rely on many
more fields without any kind of configure probe, but that predates this
commit.
The only supported system we need replacement code for now is Windows,
and that can be done without a configure probe.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Greg Stark <stark@mit.edu>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CA+hUKGJ3LHeP9w5Fgzdr4G8AnEtJ=z=p6hGDEm4qYGEUX5B6fQ@mail.gmail.com
Commit 4f658dc8 provided the traditional BSD fls() function in
src/port/fls.c so it could be used in several places. Later we added a
bunch of similar facilities in pg_bitutils.h, based on compiler
builtins that map to hardware instructions. It's a bit confusing to
have both 1-based and 0-based variants of this operation in use in
different parts of the tree, and neither is blessed by a standard.
Let's drop fls.c and the configure probe, and reuse the newer code.
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKG%2B7dSX1XF8yFGmYk-%3D48dbjH2kmzZj16XvhbrWP-9BzRg%40mail.gmail.com
Windows 10 gained support for flushing NTFS files with fdatasync()
semantics. The main advantage over open_datasync (in Windows API terms
FILE_FLAG_WRITE_THROUGH) is that the latter does not flush SATA drive
caches. The default setting is not changed, so users have to opt in to
this.
Discussion: https://postgr.es/m/CA%2BhUKGJZJVO%3DiX%2Beb-PXi2_XS9ZRqnn_4URh0NUQOwt6-_51xQ%40mail.gmail.com
I do not [yet] understand how, but my prior commit (089480c077) accidentally
removed the exec bit from configure. I'll try to figure that out later, for
now re-add to unbreak the buildfarm.
Until now postgres built extension libraries with global visibility, i.e.
exporting all symbols. On the one platform where that behavior is not
natively available, namely windows, we emulate it by analyzing the input files
to the shared library and exporting all the symbols therein.
Not exporting all symbols is actually desirable, as it can improve loading
speed, reduces the likelihood of symbol conflicts and can improve intra
extension library function call performance. It also makes the non-windows
builds more similar to windows builds.
Additionally, with meson implementing the export-all-symbols behavior for
windows, turns out to be more verbose than desirable.
This patch adds support for hiding symbols by default and, to counteract that,
explicit symbol visibility annotation for compilers that support
__attribute__((visibility("default"))) and -fvisibility=hidden. That is
expected to be most, if not all, compilers except msvc (for which we already
support explicit symbol export annotations).
Now that extension library symbols are explicitly exported, we don't need to
export all symbols on windows anymore, hence remove that behavior from
src/tools/msvc. The supporting code can't be removed, as we still need to
export all symbols from the main postgres binary.
Author: Andres Freund <andres@anarazel.de>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20211101020311.av6hphdl6xbjbuif@alap3.anarazel.de
No members of the buildfarm are using this version of Visual Studio,
resulting in all the code cleaned up here as being mostly dead, and
VS2017 is the oldest version still supported.
More versions could be cut, but the gain would be minimal, while
removing only VS2013 has the advantage to remove from the core code all
the dependencies on the value defined by _MSC_VER, where compatibility
tweaks have accumulated across the years mostly around locales and
strtof(), so that's a nice isolated cleanup.
Note that this commit additionally allows a revert of 3154e16. The
versions of Visual Studio now supported range from 2015 to 2022.
Author: Michael Paquier
Reviewed-by: Juan José Santamaría Flecha, Tom Lane, Thomas Munro, Justin
Pryzby
Discussion: https://postgr.es/m/YoH2IMtxcS3ncWn+@paquier.xyz
HP-UX hardware is no longer produced, build farm coverage recently
ended, and there are no known active maintainers targeting this OS.
Since there is a major rewrite of the build system in the pipeline for
PostgreSQL 16, and that requires development, testing and maintainance
for each OS and tool chain, it seems like a good time to drop support
for:
* HP-UX, the operating system.
* HP aCC, the HP-UX native compiler.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/1415825.1656893299%40sss.pgh.pa.us
macOS has traditionally used extension .dylib for shared libraries
(used at build time) and .so for dynamically loaded modules (used by
dlopen()). This complicates the build system a bit. Also, Meson uses
.dylib for both, so it would be worth unifying this in order to be
able to get equal build output.
There doesn't appear to be any reason to use any particular extension
for dlopened modules, since dlopen() will accept anything and
PostgreSQL is well-factored to be able to deal with any extension.
Other software packages that I have handy appear to be about 50/50
split on which extension they use for their plugins. So it seems
possible to change this safely.
Discussion: https://www.postgresql.org/message-id/flat/bcc45f78-e3c3-8fb3-7c42-5371b48b5266%40enterprisedb.com
In OpenLDAP 2.5 and later, libldap itself is always thread-safe and
there's never a libldap_r. Our existing coding dealt with that
by assuming it wouldn't find libldap_r if libldap is thread-safe.
But that rule fails to cope if there are multiple OpenLDAP versions
visible, as is likely to be the case on macOS in particular. We'd
end up using shiny new libldap in the backend and a hoary libldap_r
in libpq.
Instead, once we've found libldap, check if it's >= 2.5 (by
probing for a function introduced then) and don't bother looking
for libldap_r if so. While one can imagine library setups that
this'd still give the wrong answer for, they seem unlikely to
occur in practice.
Per report from Peter Eisentraut. Back-patch to all supported branches.
Discussion: https://postgr.es/m/fedacd7c-2a38-25c9-e7ff-dea549d0e979@enterprisedb.com
The test for lz4.h used AC_CHECK_HEADERS, but nothing was using the
resulting symbol HAVE_LZ4_H. Change this to use AC_CHECK_HEADER
instead. This was probably an oversight, seeing that the nearby
similar tests do this correctly.
It emerges that our new zstd code depends on features that were not
present (or at least not enabled by default) in zstd before 1.4.0.
That's already four years old, so there's little reason to try to
make our code work with something older. Instead make configure
check that zstd is at least 1.4.0, and document this requirement.
Justin Pryzby (doc changes by me)
Discussion: https://postgr.es/m/efbd94cd1102f99fd1300e44905ee4a994ee2ef6.camel@gunduz.org
The current implementation supports exactly one IP address in a server
certificate's Common Name, which is brittle (the strings must match
exactly). This patch adds support for IPv4 and IPv6 addresses in a
server's Subject Alternative Names.
Per discussion on-list:
- If the client's expected host is an IP address, we allow fallback to
the Subject Common Name if an iPAddress SAN is not present, even if
a dNSName is present. This matches the behavior of NSS, in
violation of the relevant RFCs.
- We also, counter-intuitively, match IP addresses embedded in dNSName
SANs. From inspection this appears to have been the behavior since
the SAN matching feature was introduced in acd08d76.
- Unlike NSS, we don't map IPv4 to IPv6 addresses, or vice-versa.
Author: Jacob Champion <pchampion@vmware.com>
Co-authored-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Co-authored-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://www.postgresql.org/message-id/flat/9f5f20974cd3a4091a788cf7f00ab663d5fcdffe.camel@vmware.com
Move DLSUFFIX from makefiles into header files for all platforms.
Move the DLSUFFIX assignment from src/makefiles/ to src/templates/,
have configure read it, and then substitute it into Makefile.global
and pg_config.h. This avoids the need for all makefile rules that
need it to locally set CPPFLAGS. It also resolves an inconsistent
setup between the two Windows build systems.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/2f9861fb-8969-9005-7518-b8e60f2bead9@enterprisedb.com
When building with sanitizers the sanitizer library provides dlopen, but not
dlsym(), making configure think that -ldl isn't needed. Just checking for
dlsym() ought to suffice, hard to see dlsym() being provided without dlopen()
also being provided.
Backpatch to all branches, for the same reasons as 46ab07ffda.
Reviewed-By: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20220323173537.ll7klrglnp4gn2um@alap3.anarazel.de
Backpatch: 10-
In particular, perl with $Config{osname} = msys should only be used if
the build target is msys (which is currently buildable but not usable).
For builds targeted at native Windows, perl from the ucrt64 toolchain is
suitable.
Discussion: https://postgr.es/m/20220216210141.5glt5isg5qtwty4c@alap3.anarazel.de
GCC 12 complains that set_stack_base is storing the address of
a local variable in a long-lived pointer. This is an entirely
reasonable warning (indeed, it just helped us find a bug);
but that behavior is intentional here. We can work around it
by using __builtin_frame_address(0) instead of a specific local
variable; that produces an address a dozen or so bytes different,
in my testing, but we don't care about such a small difference.
Maybe someday a compiler lacking that function will start to issue
a similar warning, but we'll worry about that when it happens.
Patch by me, per a suggestion from Andres Freund. Back-patch to
v12, which is as far back as the patch will go without some pain.
(Recently-established project policy would permit a back-patch as
far as 9.2, but I'm disinclined to expend the work until GCC 12
is much more widespread.)
Discussion: https://postgr.es/m/3773792.1645141467@sss.pgh.pa.us
Python 2.7 went EOL 2020-01-01 and the support for Python 2 requires a fair
bit of infrastructure. Therefore we are removing Python 2 support in plpython.
This patch just rejects Python 2 during configure / mkvcbuild.pl. Future
commits will remove the code and infrastructure for Python 2 support and
adjust more of the documentation. This way we can see the buildfarm state
after the removal sooner and we can be sure that failures are due to
desupporting Python 2, rather than caused by infrastructure cleanup.
Reviewed-By: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/20211031184548.g4sxfe47n2kyi55r@alap3.anarazel.de
Some environments may compile with --with-lz4 while the command "lz4"
goes missing, causing two failures in the TAP tests of pg_verifybackup
(008_untar.pl and 010_client_untar.pl) as the code assumed that the
command always existed with a hardcoded value in src/Makefile.global.
Rather than this method, this adds a ./configure check based on
PGAC_PATH_PROGS() to find automatically the command and get an absolute
path to it.
Both tests need to be adjusted for the case where the command does not
exist, actually, as Makefile.global would set now LZ4 to an empty value
in this case. The TAP tests of pg_receivewal already do that.
Per report from buildfarm member copperhead, as an effect of dab2984.
The origin of the failure is actually babbbb5 that did not centralize
the check for the existence of a "lz4" command at ./configure to shave a
few cycles. Note that one just needs to tweak an environment to move
"lz4" out of the way to reproduce the problem, which is what I did to
test this change.
Per discussion with Robert Haas, Tom Lane, Andres Freund and myself.
Discussion: https://postgr.es/m/Ygc51WVAFGocSu4h@paquier.xyz
Commit 6a2a70a02 supposed that any platform having <sys/epoll.h>
would also have <sys/signalfd.h>. It turns out there are still a
few people using platforms where that's not so, so we'd better make
a separate configure probe for it. But since it took this long to
notice, I'm content with the decision to not have a separate code
path for epoll-only machines; we'll just fall back to using poll()
for these stragglers.
Per gripe from Gabriela Serventi. Back-patch to v14 where this
code came in.
Discussion: https://postgr.es/m/CAHOHWE-JjJDfcYuLAAEO7Jk07atFAU47z8TzHzg71gbC0aMy=g@mail.gmail.com
The comment for PGAC_READLINE_VARIABLES says "Readline versions < 2.1
don't have rl_completion_append_character". It seems certain that such
versions are extinct in the wild, though; for sure there are none in the
buildfarm. Libedit has had this variable for at least twenty years too.
Also, tab-complete.c's behavior without it is quite unfriendly, since
we'll emit a space even when completion fails; but we've had no
complaints about that.
Therefore, let's assume this variable is always there, and drop the
configure check to save a few build cycles.
Discussion: https://postgr.es/m/147685.1643858911@sss.pgh.pa.us
With Python 3.10, configure spits out warnings about the module
distutils.sysconfig being deprecated and scheduled for removal in
Python 3.12. Change the uses in configure to use the module sysconfig
instead. The logic stays largely the same, although we have to
rely on INCLUDEPY instead of the deprecated get_python_inc function.
Note that sysconfig exists since Python 2.7, so this moves the minimum
required version up from Python 2.6. Also, sysconfig didn't exist in
Python 3.1, so the minimum 3.x version is now 3.2.
We should consider back-patching this if it gives no further trouble,
as the no-longer-supported versions are old enough to probably not
be interesting to anyone.
Peter Eisentraut, Tom Lane, Andres Freund
Discussion: https://postgr.es/m/c74add3c-09c4-a9dd-1a03-a846e5b2fc52@enterprisedb.com
We're still (see e0e567a106, e0e567a106) working on replacing use of the
deprecated distutils. This commit just makes configure print out the results
of different ways of determining the include path. Hopefully this will help us
to find a way to transition away from distutils without turning the buildfarm
red for prolonged amounts of time.
Discussion: https://postgr.es/m/20220124025301.qu36x44w6m67cnap@alap3.anarazel.de
This avoids possibly selecting Python 2.x on systems that have
both Python 2 and Python 3. We used to feel that what "python"
links to is a user choice that we should honor. However, we're
about to cease support for Python 2, so users will no longer have
any choice of that sort. This small change is being made ahead
of the big Python-2-ectomy so that we can see how much of the
buildfarm is not yet prepared for that. Systems with only
Python 2 will continue to build that way, for now.
Discussion: https://postgr.es/m/2872c9a0-4b0a-1354-d5f6-94d6f85ba354@enterprisedb.com
This reverts commit e0e567a106.
On various platforms, the new approach using the sysconfig module
reported incorrect values for the include directory, and so any
Python-related compilations failed. Revert for now and revisit later.
With Python 3.10, configure spits out warnings about the module
distutils.sysconfig being deprecated and scheduled for removal in
Python 3.12. Change the uses in configure to use the module sysconfig
instead. The logic stays the same.
Note that sysconfig exists since Python 2.7, so this moves the minimum
required version up from Python 2.6.
Discussion: https://www.postgresql.org/message-id/flat/c74add3c-09c4-a9dd-1a03-a846e5b2fc52%40enterprisedb.com
Try to disable ASLR when building in EXEC_BACKEND mode, to avoid random
memory mapping failures while testing. For developer use only, no
effect on regular builds.
Suggested-by: Andres Freund <andres@anarazel.de>
Tested-by: Bossart, Nathan <bossartn@amazon.com>
Discussion: https://postgr.es/m/20210806032944.m4tz7j2w47mant26%40alap3.anarazel.de
1. Update our open() wrapper to check for NT's STATUS_DELETE_PENDING
and translate it to Unix-like errors. This is done with
RtlGetLastNtStatus(), which is dynamically loaded from ntdll. A new
file win32ntdll.c centralizes lookup of NT functions, in case we decide
to add more in the future.
2. Remove non-working code that was trying to do something similar for
stat(), and just reuse the open() wrapper code. As a side effect,
stat() also gains resilience against "sharing violation" errors.
3. Since stat() is used very early in process startup, remove the
requirement that the Win32 signal event has been created before
pgwin32_open_handle() is reached. Instead, teach pg_usleep() to fall
back to a non-interruptible sleep if reached before the signal event is
available.
This could be back-patched, but for now it's in master only. The
problem has apparently been with us for a long time and generated only a
few complaints. Proposed patches trigger it more often, which led to
this investigation and fix.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Alexander Lakhin <exclusion@gmail.com>
Reviewed-by: Juan José Santamaría Flecha <juanjo.santamaria@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKGJz_pZTF9mckn6XgSv69%2BjGwdgLkxZ6b3NWGLBCVjqUZA%40mail.gmail.com
Commit 16f96c74d neglected to consider the possibility of cross-compiling,
causing cross-compiles to fail at the configure stage unless you'd
selected --with-openssl. Since we're now more or less assuming that
/dev/urandom is available everywhere, it seems reasonable to assume
that the cross-compile target has it too, rather than failing.
Per complaint from Vincas Dargis. Back-patch to v14 where this came in.
Discussion: https://postgr.es/m/0dc14a31-acaf-8cae-0df4-a87339b22bd9@gmail.com
Standardize on xoroshiro128** as our basic PRNG algorithm, eliminating
a bunch of platform dependencies as well as fundamentally-obsolete PRNG
code. In addition, this API replacement will ease replacing the
algorithm again in future, should that become necessary.
xoroshiro128** is a few percent slower than the drand48 family,
but it can produce full-width 64-bit random values not only 48-bit,
and it should be much more trustworthy. It's likely to be noticeably
faster than the platform's random(), depending on which platform you
are thinking about; and we can have non-global state vectors easily,
unlike with random(). It is not cryptographically strong, but neither
are the functions it replaces.
Fabien Coelho, reviewed by Dean Rasheed, Aleksander Alekseev, and myself
Discussion: https://postgr.es/m/alpine.DEB.2.22.394.2105241211230.165418@pseudo
Thomas Munro
Andres Freund
Michael Paquier
Peter Eisentraut
Tom Lane
Andrew Dunstan
Robert Haas
Bruce Momjian