pread() and pwrite() are in SUSv2, and all targeted Unix systems have
them.
Previously, we defined pg_pread and pg_pwrite to emulate these function
with lseek() on old Unixen. The names with a pg_ prefix were a reminder
of a portability hazard: they might change the current file position.
That hazard is gone, so we can drop the prefixes.
Since the remaining replacement code is Windows-only, move it into
src/port/win32p{read,write}.c, and move the declarations into
src/include/port/win32_port.h.
No need for vestigial HAVE_PREAD, HAVE_PWRITE macros as they were only
used for declarations in port.h which have now moved into win32_port.h.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Greg Stark <stark@mit.edu>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ3LHeP9w5Fgzdr4G8AnEtJ=z=p6hGDEm4qYGEUX5B6fQ@mail.gmail.com
setenv() and unsetenv() are in SUSv3 and targeted Unix systems have
them. We still need special code for these on Windows, but that doesn't
require a configure probe.
This marks the first time we require a SUSv3 (POSIX.1-2001) facility
(rather than SUSv2). The replacement code removed here was not needed
on any targeted system or any known non-EOL'd Unix system, and was
therefore dead and untested.
No need for vestigial HAVE_SETENV and HAVE_UNSETENV macros, because we
provide a replacement for Windows, and we didn't previously test the
macros.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Greg Stark <stark@mit.edu>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ3LHeP9w5Fgzdr4G8AnEtJ=z=p6hGDEm4qYGEUX5B6fQ@mail.gmail.com
poll() and <poll.h> are in SUSv2 and all targeted Unix systems have
them.
Retain HAVE_POLL and HAVE_POLL_H macros for readability. There's an
error in latch.c that is now unreachable (since we always have one of
WIN32 or HAVE_POLL defined), but that falls out of a decision to keep
using defined(HAVE_POLL) instead of !defined(WIN32) to guard the poll()
code.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ3LHeP9w5Fgzdr4G8AnEtJ=z=p6hGDEm4qYGEUX5B6fQ@mail.gmail.com
link() is in SUSv2 and all targeted Unix systems have it. We have
replacement code for Windows that doesn't require a configure probe.
Since only Windows needs it, rename src/port/link.c to win32link.c like
other similar things.
There is no need for a vestigial HAVE_LINK macro, because we expect all
Unix and, with our replacement function, Windows systems to have it, so
we didn't have any tests around link() usage.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ3LHeP9w5Fgzdr4G8AnEtJ=z=p6hGDEm4qYGEUX5B6fQ@mail.gmail.com
symlink() and readlink() are in SUSv2 and all targeted Unix systems have
them. We have partial emulation on Windows. Code that raised runtime
errors on systems without it has been dead for years, so we can remove
that and also references to such systems in the documentation.
Define HAVE_READLINK and HAVE_SYMLINK macros on Unix. Our Windows
replacement functions based on junction points can't be used for
relative paths or for non-directories, so the macros can be used to
check for full symlink support. The places that deal with tablespaces
can just use symlink functions without checking the macros. (If they
did check the macros, they'd need to provide an #else branch with a
runtime or compile time error, and it'd be dead code.)
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ3LHeP9w5Fgzdr4G8AnEtJ=z=p6hGDEm4qYGEUX5B6fQ@mail.gmail.com
setsid() is in SUSv2 and all targeted Unix systems have it. Retain a
HAVE_SETSID macro, defined on Unix only. That's easier to understand
than !defined(WIN32), for the optional code it governs.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ3LHeP9w5Fgzdr4G8AnEtJ=z=p6hGDEm4qYGEUX5B6fQ@mail.gmail.com
shm_open() is in SUSv2 and all targeted Unix systems have it.
We retain a HAVE_SHM_OPEN macro, because it's clearer to readers than
something like !defined(WIN32).
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ3LHeP9w5Fgzdr4G8AnEtJ=z=p6hGDEm4qYGEUX5B6fQ@mail.gmail.com
getrlimit() is in SUSv2 and all targeted systems have it.
Windows doesn't have it. We could just use #ifndef WIN32, but for a
little more explanation about why we're making things conditional, let's
retain the HAVE_GETRLIMIT macro. It's defined in port.h for Unix systems.
On systems that have it, it's not necessary to test for RLIMIT_CORE,
RLIMIT_STACK or RLIMIT_NOFILE macros, since SUSv2 requires those and all
targeted systems have them. Also remove references to a pre-historic
alternative spelling of RLIMIT_NOFILE, and coding that seemed to believe
that Cygwin didn't have it.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ3LHeP9w5Fgzdr4G8AnEtJ=z=p6hGDEm4qYGEUX5B6fQ@mail.gmail.com
dlopen() is in SUSv2 and all targeted Unix systems have it. We still
need replacement functions for Windows, but we don't need a configure
probe for that.
Since it's no longer needed by other operating systems, rename dlopen.c
to win32dlopen.c and move the declarations into win32_port.h.
Likewise, the macros RTLD_NOW and RTLD_GLOBAL now only need to be
defined on Windows, since all targeted Unix systems have 'em.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ3LHeP9w5Fgzdr4G8AnEtJ=z=p6hGDEm4qYGEUX5B6fQ@mail.gmail.com
sigwait() is in SUSv2 and all targeted Unix systems have it. An earlier
pre-standard function prototype existed on some older systems, but we
no longer need a workaround for that.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Greg Stark <stark@mit.edu>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CA+hUKGJ3LHeP9w5Fgzdr4G8AnEtJ=z=p6hGDEm4qYGEUX5B6fQ@mail.gmail.com
getrusage() is in SUSv2 and all targeted Unix systems have it.
Note that POSIX only covers ru_utime and ru_stime and we rely on many
more fields without any kind of configure probe, but that predates this
commit.
The only supported system we need replacement code for now is Windows,
and that can be done without a configure probe.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Greg Stark <stark@mit.edu>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CA+hUKGJ3LHeP9w5Fgzdr4G8AnEtJ=z=p6hGDEm4qYGEUX5B6fQ@mail.gmail.com
Commit 4f658dc8 provided the traditional BSD fls() function in
src/port/fls.c so it could be used in several places. Later we added a
bunch of similar facilities in pg_bitutils.h, based on compiler
builtins that map to hardware instructions. It's a bit confusing to
have both 1-based and 0-based variants of this operation in use in
different parts of the tree, and neither is blessed by a standard.
Let's drop fls.c and the configure probe, and reuse the newer code.
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKG%2B7dSX1XF8yFGmYk-%3D48dbjH2kmzZj16XvhbrWP-9BzRg%40mail.gmail.com
Windows 10 gained support for flushing NTFS files with fdatasync()
semantics. The main advantage over open_datasync (in Windows API terms
FILE_FLAG_WRITE_THROUGH) is that the latter does not flush SATA drive
caches. The default setting is not changed, so users have to opt in to
this.
Discussion: https://postgr.es/m/CA%2BhUKGJZJVO%3DiX%2Beb-PXi2_XS9ZRqnn_4URh0NUQOwt6-_51xQ%40mail.gmail.com
This is in preparation for building postgres with meson / ninja.
When building with meson, commands are run at the root of the build tree. Add
an option to put build output into the appropriate place. This can be utilized
by src/tools/msvc/ for a minor simplification, which also provides some
coverage for the new option.
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/5e216522-ba3c-f0e6-7f97-5276d0270029@enterprisedb.com
This is in preparation for building postgres with meson / ninja.
meson's 'capture' (redirecting stdout to a file) is a bit slower than programs
redirecting output themselves (mostly due to a python wrapper necessary for
windows). That doesn't matter for most things, but errcodes.h is a dependency
of nearly everything, making it a bit faster seem worthwhile.
Medium term it might also be worth avoiding writing errcodes.h if its contents
didn't actually change, to avoid unnecessary recompilations.
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/5e216522-ba3c-f0e6-7f97-5276d0270029@enterprisedb.com
This is in preparation for building postgres with meson / ninja.
When building with meson, commands are run at the root of the build tree. Add
an option to put build output into the appropriate place. This can be utilized
by src/tools/msvc/ for a minor simplification, which also provides some
coverage for the new option.
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/5e216522-ba3c-f0e6-7f97-5276d0270029@enterprisedb.com
This is in preparation for building postgres with meson / ninja.
We already have duplicated code for this between the make and msvc
builds. Adding a third copy seems like a bad plan, thus move the generation
into a perl script.
As we don't want to rely on perl being available for builds from tarballs,
generate the file during distprep.
Author: Peter Eisentraut <peter@eisentraut.org>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/5e216522-ba3c-f0e6-7f97-5276d0270029@enterprisedb.com
This is in preparation for building postgres with meson / ninja.
When building with meson, commands are run at the root of the build tree. Add
an option to put build output into the appropriate place. This can be utilized
by src/tools/msvc/ for a minor simplification, which also provides some
coverage for the new option.
Add option to generate a timestamp for check_rules.pl, so that proper
dependencies on it having been run can be generated.
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/5e216522-ba3c-f0e6-7f97-5276d0270029@enterprisedb.com
This is in preparation for building postgres with meson / ninja.
When building with meson, commands are run at the root of the build tree. Add
an option to put build output into the appropriate place. This can be utilized
by src/tools/msvc/ for a minor simplification, which also provides some
coverage for the new option.
To deal with dependencies to the variable set of input files to this script,
add an option to generate a dependency file (which meson / ninja can consume).
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/5e216522-ba3c-f0e6-7f97-5276d0270029@enterprisedb.com
Until now postgres built extension libraries with global visibility, i.e.
exporting all symbols. On the one platform where that behavior is not
natively available, namely windows, we emulate it by analyzing the input files
to the shared library and exporting all the symbols therein.
Not exporting all symbols is actually desirable, as it can improve loading
speed, reduces the likelihood of symbol conflicts and can improve intra
extension library function call performance. It also makes the non-windows
builds more similar to windows builds.
Additionally, with meson implementing the export-all-symbols behavior for
windows, turns out to be more verbose than desirable.
This patch adds support for hiding symbols by default and, to counteract that,
explicit symbol visibility annotation for compilers that support
__attribute__((visibility("default"))) and -fvisibility=hidden. That is
expected to be most, if not all, compilers except msvc (for which we already
support explicit symbol export annotations).
Now that extension library symbols are explicitly exported, we don't need to
export all symbols on windows anymore, hence remove that behavior from
src/tools/msvc. The supporting code can't be removed, as we still need to
export all symbols from the main postgres binary.
Author: Andres Freund <andres@anarazel.de>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20211101020311.av6hphdl6xbjbuif@alap3.anarazel.de
No members of the buildfarm are using this version of Visual Studio,
resulting in all the code cleaned up here as being mostly dead, and
VS2017 is the oldest version still supported.
More versions could be cut, but the gain would be minimal, while
removing only VS2013 has the advantage to remove from the core code all
the dependencies on the value defined by _MSC_VER, where compatibility
tweaks have accumulated across the years mostly around locales and
strtof(), so that's a nice isolated cleanup.
Note that this commit additionally allows a revert of 3154e16. The
versions of Visual Studio now supported range from 2015 to 2022.
Author: Michael Paquier
Reviewed-by: Juan José Santamaría Flecha, Tom Lane, Thomas Munro, Justin
Pryzby
Discussion: https://postgr.es/m/YoH2IMtxcS3ncWn+@paquier.xyz
Add a script to automatically generate the node support functions
(copy, equal, out, and read, as well as the node tags enum) from the
struct definitions.
For each of the four node support files, it creates two include files,
e.g., copyfuncs.funcs.c and copyfuncs.switch.c, to include in the main
file. All the scaffolding of the main file stays in place.
I have tried to mostly make the coverage of the output match what is
currently there. For example, one could now do out/read coverage of
utility statement nodes, but I have manually excluded those for now.
The reason is mainly that it's easier to diff the before and after,
and adding a bunch of stuff like this might require a separate
analysis and review.
Subtyping (TidScan -> Scan) is supported.
For the hard cases, you can just write a manual function and exclude
generating one. For the not so hard cases, there is a way of
annotating struct fields to get special behaviors. For example,
pg_node_attr(equal_ignore) has the field ignored in equal functions.
(In this patch, I have only ifdef'ed out the code to could be removed,
mainly so that it won't constantly have merge conflicts. It will be
deleted in a separate patch. All the code comments that are worth
keeping from those sections have already been moved to the header
files where the structs are defined.)
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/c1097590-a6a4-486a-64b1-e1f9cc0533ce%40enterprisedb.com
HP-UX hardware is no longer produced, build farm coverage recently
ended, and there are no known active maintainers targeting this OS.
Since there is a major rewrite of the build system in the pipeline for
PostgreSQL 16, and that requires development, testing and maintainance
for each OS and tool chain, it seems like a good time to drop support
for:
* HP-UX, the operating system.
* HP aCC, the HP-UX native compiler.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/1415825.1656893299%40sss.pgh.pa.us
The current setup assumes that commands for lz4, zstd and gzip always
exist by default if not enforced by a user's environment. However,
vcpkg, as one example, installs libraries but no binaries, so this
default setup to assume that a command should always be present would
cause failures. This commit improves the detection of such external
commands as follows:
* If a ENV value is available, trust the environment/user and use it.
* If a ENV value is not available, check its execution by looking in the
current PATH, by launching a simple "$command --version" (that should be
portable enough).
** On execution failure, ignore ENV{command}.
** On execution success, set ENV{command} = "$command".
Note that this new rule applies to gzip, lz4 and zstd but not tar that
we assume will always exist. Those commands are set up in the
environment only when using bincheck and taptest. The CI includes all
those commands and I have checked that their setup is correct there. I
have also tested this change in a MSVC environment where we have none of
those commands.
While on it, remove the references to lz4 from the documentation and
vcregress.pl in ~v13. --with-lz4 has been added in v14~ so there is no
point to have this information in these older branches.
Reported-by: Andrew Dunstan
Reviewed-by: Andrew Dunstan
Discussion: https://postgr.es/m/14402151-376b-a57a-6d0c-10ad12608e12@dunslane.net
Backpatch-through: 10
The test for lz4.h used AC_CHECK_HEADERS, but nothing was using the
resulting symbol HAVE_LZ4_H. Change this to use AC_CHECK_HEADER
instead. This was probably an oversight, seeing that the nearby
similar tests do this correctly.
The testclient and uri-regress programs in the libpq test suite had
quite generic names which didn't convey much meaning. Since they are
installed as part of the MSVC test runs, ensure that their purpose
is a little bit clearer by renaming with a libpq_ prefix. While at
it rename uri-regress to uri_regress to avoid mixing dash and under-
score in the same filename.
Reported-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/20220501080706.GA1542365@rfd.leadboat.com
Compression option handling (level, algorithm or even workers) can be
used across several parts of the system and not only base backups.
Structures, objects and routines are renamed in consequence, to remove
the concept of base backups from this part of the code making this
change straight-forward.
pg_receivewal, that has gained support for LZ4 since babbbb5, will make
use of this infrastructure for its set of compression options, bringing
more consistency with pg_basebackup. This cleanup needs to be done
before releasing a beta of 15. pg_dump is a potential future target, as
well, and adding more compression options to it may happen in 16~.
Author: Michael Paquier
Reviewed-by: Robert Haas, Georgios Kokolatos
Discussion: https://postgr.es/m/YlPQGNAAa04raObK@paquier.xyz
322becb has changed upgradecheck to use the TAP tests, discarding
pg_upgrade's tests in bincheck. However, this is proving to be a bad
idea for the Windows buildfarm clients that use MSVC when TAP tests are
disabled as this causes a hard failure at the pg_upgrade step.
This commit disables upgradecheck, moving the execution of the tests of
pg_upgrade to bincheck, as per an initial suggestion from Andres
Freund, so as the buildfarm is able to live happily with those changes.
While on it, remove the routine that was used by upgradecheck to
create databases whose names are generated with a range of ASCII
characters as it is not used since 322becb. upgradecheck is removed
from the CI script for Windows, as bincheck takes care of that now.
Per report from buildfarm member hamerkop (MSVC 2017 without a TAP
setup).
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/YkbnpriYEAagZ2wH@paquier.xyz
The current implementation supports exactly one IP address in a server
certificate's Common Name, which is brittle (the strings must match
exactly). This patch adds support for IPv4 and IPv6 addresses in a
server's Subject Alternative Names.
Per discussion on-list:
- If the client's expected host is an IP address, we allow fallback to
the Subject Common Name if an iPAddress SAN is not present, even if
a dNSName is present. This matches the behavior of NSS, in
violation of the relevant RFCs.
- We also, counter-intuitively, match IP addresses embedded in dNSName
SANs. From inspection this appears to have been the behavior since
the SAN matching feature was introduced in acd08d76.
- Unlike NSS, we don't map IPv4 to IPv6 addresses, or vice-versa.
Author: Jacob Champion <pchampion@vmware.com>
Co-authored-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Co-authored-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://www.postgresql.org/message-id/flat/9f5f20974cd3a4091a788cf7f00ab663d5fcdffe.camel@vmware.com
This simplifies a lot of code in the tests of pg_upgrade without
sacrificing its coverage:
- Removal of test.sh used for builds with make, that has accumulated
over the years tweaks for problems that are solved in a duplicated way
by the centralized TAP framework (initialization of the various
environment variables PG*, port selection).
- Removal of the code in MSVC to test pg_upgrade. This was roughly a
duplicate of test.sh adapted for Windows, with an extra footprint of
a pg_regress command and all the assumptions behind it.
Support for upgrades with older versions is changed, not removed.
test.sh was able to set up the regression database on the old instance
by launching itself the pg_regress command and a dependency to the
source tree of thd old cluster, with tweaks on the command arguments to
adapt across the versions used. This created a backward-compatibility
dependency with older pg_regress commands, and recent changes like
d1029bb have made that much more complicated.
Instead, this commit allows tests with older major versions by
specifying a path to a SQL dump (taken with pg_dumpall from the old
cluster's installation) that will be loaded into the old instance to
upgrade instead of running pg_regress, through an optional environment
variable called $olddump. This requires a second variable called
$oldinstall to point to the base path of the installation of the old
cluster. This method is more in line with the buildfarm client that
uses a set of static dumps to set up an old instance, so hopefully we
will be able to reuse what is introduced in this commit there. The last
step of the tests that checks for differences between the two dumps
taken still needs to be improved as it can fail, requiring a manual
lookup at the dumps. This is not different from the old way of testing
where things could fail at the last step.
Support for EXTRA_REGRESS_OPTS is kept. vcregress.pl in the MSVC
scripts still handles the test of pg_upgrade with its upgradecheck, and
bincheck is changed to skip pg_upgrade.
Author: Michael Paquier
Reviewed-by: Andrew Dunstan, Andres Freund, Rachel Heaton, Tom Lane,
Discussion: https://postgr.es/m/YJ8xTmLQkotVLpN5@paquier.xyz
Move DLSUFFIX from makefiles into header files for all platforms.
Move the DLSUFFIX assignment from src/makefiles/ to src/templates/,
have configure read it, and then substitute it into Makefile.global
and pg_config.h. This avoids the need for all makefile rules that
need it to locally set CPPFLAGS. It also resolves an inconsistent
setup between the two Windows build systems.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/2f9861fb-8969-9005-7518-b8e60f2bead9@enterprisedb.com
There are more compression parameters that can be specified than just
an integer compression level, so rename the new COMPRESSION_LEVEL
option to COMPRESSION_DETAIL before it gets released. Introduce a
flexible syntax for that option to allow arbitrary options to be
specified without needing to adjust the main replication grammar,
and common code to parse it that is shared between the client and
the server.
This commit doesn't actually add any new compression parameters,
so the only user-visible change is that you can now type something
like pg_basebackup --compress gzip:level=5 instead of writing just
pg_basebackup --compress gzip:5. However, it should make it easy to
add new options. If for example gzip starts offering fries, we can
support pg_basebackup --compress gzip:level=5,fries=true for the
benefit of users who want fries with that.
Along the way, this fixes a few things in pg_basebackup so that the
pg_basebackup can be used with a server-side compression algorithm
that pg_basebackup itself does not understand. For example,
pg_basebackup --compress server-lz4 could still succeed even if
only the server and not the client has LZ4 support, provided that
the other options to pg_basebackup don't require the client to
decompress the archive.
Patch by me. Reviewed by Justin Pryzby and Dagfinn Ilmari Mannsåker.
Discussion: http://postgr.es/m/CA+TgmoYvpetyRAbbg1M8b3-iHsaN4nsgmWPjOENu5-doHuJ7fA@mail.gmail.com
Both client-side compression and server-side compression are now
supported for zstd. In addition, a backup compressed by the server
using zstd can now be decompressed by the client in order to
accommodate the use of -Fp.
Jeevan Ladhe, with some edits by me.
Discussion: http://postgr.es/m/CA+Tgmobyzfbz=gyze2_LL1ZumZunmaEKbHQxjrFkOR7APZGu-g@mail.gmail.com
Since 19252e8ec9 we reject Python 2 during build configuration. Now that the
dust on the buildfarm has settled, remove regression testing infrastructure
dealing with differing output between Python 2 / 3.
Reviewed-By: Peter Eisentraut <peter@eisentraut.org>
Reviewed-By: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20211031184548.g4sxfe47n2kyi55r@alap3.anarazel.de
GCC 12 complains that set_stack_base is storing the address of
a local variable in a long-lived pointer. This is an entirely
reasonable warning (indeed, it just helped us find a bug);
but that behavior is intentional here. We can work around it
by using __builtin_frame_address(0) instead of a specific local
variable; that produces an address a dozen or so bytes different,
in my testing, but we don't care about such a small difference.
Maybe someday a compiler lacking that function will start to issue
a similar warning, but we'll worry about that when it happens.
Patch by me, per a suggestion from Andres Freund. Back-patch to
v12, which is as far back as the patch will go without some pain.
(Recently-established project policy would permit a back-patch as
far as 9.2, but I'm disinclined to expend the work until GCC 12
is much more widespread.)
Discussion: https://postgr.es/m/3773792.1645141467@sss.pgh.pa.us
Python 2.7 went EOL 2020-01-01 and the support for Python 2 requires a fair
bit of infrastructure. Therefore we are removing Python 2 support in plpython.
This patch just rejects Python 2 during configure / mkvcbuild.pl. Future
commits will remove the code and infrastructure for Python 2 support and
adjust more of the documentation. This way we can see the buildfarm state
after the removal sooner and we can be sure that failures are due to
desupporting Python 2, rather than caused by infrastructure cleanup.
Reviewed-By: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/20211031184548.g4sxfe47n2kyi55r@alap3.anarazel.de
LZ4 compression can now be performed on the client using
pg_basebackup -Ft --compress client-lz4, and LZ4 decompression of
a backup compressed on the server can be performed on the client
using pg_basebackup -Fp --compress server-lz4.
Dipesh Pandit, reviewed and tested by Jeevan Ladhe and Tushar Ahuja,
with a few corrections - and some documentation - by me.
Discussion: http://postgr.es/m/CAN1g5_FeDmiA9D8wdG2W6Lkq5CpubxOAqTmd2et9hsinTJtsMQ@mail.gmail.com
Commit 6a2a70a02 supposed that any platform having <sys/epoll.h>
would also have <sys/signalfd.h>. It turns out there are still a
few people using platforms where that's not so, so we'd better make
a separate configure probe for it. But since it took this long to
notice, I'm content with the decision to not have a separate code
path for epoll-only machines; we'll just fall back to using poll()
for these stragglers.
Per gripe from Gabriela Serventi. Back-patch to v14 where this
code came in.
Discussion: https://postgr.es/m/CAHOHWE-JjJDfcYuLAAEO7Jk07atFAU47z8TzHzg71gbC0aMy=g@mail.gmail.com
The comment for PGAC_READLINE_VARIABLES says "Readline versions < 2.1
don't have rl_completion_append_character". It seems certain that such
versions are extinct in the wild, though; for sure there are none in the
buildfarm. Libedit has had this variable for at least twenty years too.
Also, tab-complete.c's behavior without it is quite unfriendly, since
we'll emit a space even when completion fails; but we've had no
complaints about that.
Therefore, let's assume this variable is always there, and drop the
configure check to save a few build cycles.
Discussion: https://postgr.es/m/147685.1643858911@sss.pgh.pa.us
This fixes a set of issues that have accumulated over the past months
(or years) in various code areas. Most fixes are related to some recent
additions, as of the development of v15.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220124030001.GQ23027@telsasoft.com
Thomas Munro
Andres Freund
Michael Paquier
Tom Lane
Peter Eisentraut
Daniel Gustafsson
Andrew Dunstan
Robert Haas