Commit Graph

23 Commits

Author SHA1 Message Date
Bruce Momjian 97c39498e5 Update copyright for 2019
Backpatch-through: certain files through 9.4
2019-01-02 12:44:25 -05:00
Tom Lane 44cac93464 Avoid using potentially-under-aligned page buffers.
There's a project policy against using plain "char buf[BLCKSZ]" local
or static variables as page buffers; preferred style is to palloc or
malloc each buffer to ensure it is MAXALIGN'd.  However, that policy's
been ignored in an increasing number of places.  We've apparently got
away with it so far, probably because (a) relatively few people use
platforms on which misalignment causes core dumps and/or (b) the
variables chance to be sufficiently aligned anyway.  But this is not
something to rely on.  Moreover, even if we don't get a core dump,
we might be paying a lot of cycles for misaligned accesses.

To fix, invent new union types PGAlignedBlock and PGAlignedXLogBlock
that the compiler must allocate with sufficient alignment, and use
those in place of plain char arrays.

I used these types even for variables where there's no risk of a
misaligned access, since ensuring proper alignment should make
kernel data transfers faster.  I also changed some places where
we had been palloc'ing short-lived buffers, for coding style
uniformity and to save palloc/pfree overhead.

Since this seems to be a live portability hazard (despite the lack
of field reports), back-patch to all supported versions.

Patch by me; thanks to Michael Paquier for review.

Discussion: https://postgr.es/m/1535618100.1286.3.camel@credativ.de
2018-09-01 15:27:17 -04:00
Michael Paquier 5a23c74b63 Reset properly errno before calling write()
6cb3372 enforces errno to ENOSPC when less bytes than what is expected
have been written when it is unset, though it forgot to properly reset
errno before doing a system call to write(), causing errno to
potentially come from a previous system call.

Reported-by: Tom Lane
Author: Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/31797.1533326676@sss.pgh.pa.us
2018-08-05 05:31:18 +09:00
Michael Paquier d08c3d5197 Correct handling of fsync failures with tar mode of walmethods.c
This file has been missing the fact that it needs to report back to
callers a proper failure on fsync calls.  I have spotted the one in
tar_finish() while Kuntal has spotted the one in tar_close().

Backpatch down to 10 where this code has been introduced.

Reported by: Michael Paquier, Kuntal Ghosh
Author: Michael Paquier
Reviewed-by: Kuntal Ghosh, Magnus Hagander
Discussion: https://postgr.es/m/20180625024356.GD1146@paquier.xyz
2018-06-26 09:41:58 +09:00
Michael Paquier 6cb3372411 Address set of issues with errno handling
System calls mixed up in error code paths are causing two issues which
several code paths have not correctly handled:
1) For write() calls, sometimes the system may return less bytes than
what has been written without errno being set.  Some paths were careful
enough to consider that case, and assumed that errno should be set to
ENOSPC, other calls missed that.
2) errno generated by a system call is overwritten by other system calls
which may succeed once an error code path is taken, causing what is
reported to the user to be incorrect.

This patch uses the brute-force approach of correcting all those code
paths.  Some refactoring could happen in the future, but this is let as
future work, which is not targeted for back-branches anyway.

Author: Michael Paquier
Reviewed-by: Ashutosh Sharma
Discussion: https://postgr.es/m/20180622061535.GD5215@paquier.xyz
2018-06-25 11:19:05 +09:00
Stephen Frost da9b580d89 Refactor dir/file permissions
Consolidate directory and file create permissions for tools which work
with the PG data directory by adding a new module (common/file_perm.c)
that contains variables (pg_file_create_mode, pg_dir_create_mode) and
constants to initialize them (0600 for files and 0700 for directories).

Convert mkdir() calls in the backend to MakePGDirectory() if the
original call used default permissions (always the case for regular PG
directories).

Add tests to make sure permissions in PGDATA are set correctly by the
tools which modify the PG data directory.

Authors: David Steele <david@pgmasters.net>,
         Adam Brightwell <adam.brightwell@crunchydata.com>
Reviewed-By: Michael Paquier, with discussion amongst many others.
Discussion: https://postgr.es/m/ad346fe6-b23e-59f1-ecb7-0e08390ad629%40pgmasters.net
2018-04-07 17:45:39 -04:00
Bruce Momjian 9d4649ca49 Update copyright for 2018
Backpatch-through: certain files through 9.3
2018-01-02 23:30:12 -05:00
Peter Eisentraut 26d40ada3f Message style improvements 2017-08-04 18:31:32 -04:00
Peter Eisentraut 5ff3d73813 Add new files to nls.mk and add translation markers 2017-08-02 22:45:48 -04:00
Peter Eisentraut 4260c05c6d Update code comments for pg_xlog -> pg_wal
Author: Michael Paquier <michael.paquier@gmail.com>
2017-06-30 14:40:50 -04:00
Tom Lane 382ceffdf7 Phase 3 of pgindent updates.
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.

By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis.  However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent.  That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.

This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.

This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.

Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
2017-06-21 15:35:54 -04:00
Bruce Momjian a6fd7b7a5f Post-PG 10 beta1 pgindent run
perltidy run not included.
2017-05-17 16:31:56 -04:00
Magnus Hagander b935eb7da3 Fix reversed check of return value from sync
While at it also update the comments in walmethods.h to make it less
likely for mistakes like this to appear in the future (thanks to Tom for
improvements to the comments).

And finally, in passing change the return type of walmethod.getlasterror
to being const, also per suggestion from Tom.
2017-04-12 13:46:38 +02:00
Magnus Hagander cada1af31d Add compression support to pg_receivexlog
Author: Michael Paquier, review and small changes by me
2017-01-17 12:10:26 +01:00
Bruce Momjian 1d25779284 Update copyright via script for 2017 2017-01-03 13:48:53 -05:00
Magnus Hagander a775406ec4 Fix memory leak in tar file padding
Spotted by Coverity, patch by Michael Paquier
2016-10-30 14:10:39 +01:00
Magnus Hagander 78d109150b Free walmethods before exiting
Not strictly necessary since we quite after, but could become important
in the future if we do restarts etc.

Michael Paquier with nitpicking from me
2016-10-25 19:00:12 +02:00
Magnus Hagander 8c46f0c9ce Don't fsync() files when --no-sync is specified
Michael Paquier
2016-10-25 19:00:01 +02:00
Magnus Hagander 2dde01ccbf Use ssize_t where signed results can happen
Noted by Alexander Korotkov
2016-10-24 20:10:18 +02:00
Magnus Hagander eade082b12 Rename walmethod fsync method to sync
Using the name fsync clashed with the #define we have on Windows that
redefines it to _commit. Naming it sync should remove that conflict.

Per all the Windows buildfarm members
2016-10-23 18:04:34 +02:00
Magnus Hagander a5c17c1dce Fix obviously too quickly applied fix to zlib issue 2016-10-23 16:07:31 +02:00
Magnus Hagander 9ae6713cdf Fix walmethods.c build without libz
Per numerous buildfarm manuals
2016-10-23 16:00:42 +02:00
Magnus Hagander 56c7d8d455 Allow pg_basebackup to stream transaction log in tar mode
This will write the received transaction log into a file called
pg_wal.tar(.gz) next to the other tarfiles instead of writing it to
base.tar. When using fetch mode, the transaction log is still written to
base.tar like before, and when used against a pre-10 server, the file
is named pg_xlog.tar.

To do this, implement a new concept of a "walmethod", which is
responsible for writing the WAL. Two implementations exist, one that
writes to a plain directory (which is also used by pg_receivexlog) and
one that writes to a tar file with optional compression.

Reviewed by Michael Paquier
2016-10-23 15:23:11 +02:00