This is primarily useful for the upcoming pg_xlogdump --stats feature,
but also allows to remove some duplicated code in the rmgr_desc
routines.
Due to the separation and harmonization, the output of dipsplayed
records changes somewhat. But since this isn't enduser oriented
content that's ok.
It's potentially desirable to further change pg_xlogdump's display of
records. It previously wasn't possible to show the record type
separately from the description forcing it to be in the last
column. But that's better done in a separate commit.
Author: Abhijit Menon-Sen, slightly editorialized by me
Reviewed-By: Álvaro Herrera, Andres Freund, and Heikki Linnakangas
Discussion: 20140604104716.GA3989@toroid.org
The code that tried to split a page at 75/25 ratio, when appending to the
end of an index, was buggy in two ways. First, there was a silly typo that
caused it to just fill the left page as full as possible. But the logic as
it was intended wasn't correct either, and would actually have given a ratio
closer to 60/40 than 75/25.
Gaetano Mendola spotted the typo. Backpatch to 9.4, where this code was added.
Every redo routine uses the same idiom to determine what to do to a page:
check if there's a backup block for it, and if not read, the buffer if the
block exists, and check its LSN. Refactor that into a common function,
XLogReadBufferForRedo, making all the redo routines shorter and more
readable.
This has no user-visible effect, and makes no changes to the WAL format.
Reviewed by Andres Freund, Alvaro Herrera, Michael Paquier.
The list of posting lists it's dealing with can contain placeholders for
deleted posting lists. The placeholders are kept around so that they can
be WAL-logged, but we must be careful to not try to access them.
This fixes bug #11280, reported by Mårten Svantesson. Backpatch to 9.4,
where the compressed data leaf page code was added.
This reverts commit e23014f3d4.
As the side effect of the reverted commit, when the unit is
specified, the reloption was stored in the catalog with the unit.
This broke pg_dump (specifically, it prevented pg_dump from
outputting restorable backup regarding the reloption) and
turned the buildfarm red. Revert the commit until the fixed
version is ready.
This introduces an infrastructure which allows us to specify the units
like ms (milliseconds) in integer relation option, like GUC parameter.
Currently only autovacuum_vacuum_cost_delay reloption can accept
the units.
Reviewed by Michael Paquier
There's no point in setting up a context error callback when doing
conditional lock acquisition, because we never actually wait and so the
user wouldn't be able to see the context message anywhere. In fact,
this is more in line with what ConditionalXactLockTableWait is doing.
Backpatch to 9.4, where this was added.
The symbol was added by 71901ab6d; the original code was introduced by
6868ed749. Development of both overlapped which is why we apparently
failed to notice.
This is a (very slight) behavior change, so I'm not backpatching this to
9.4 for now, even though the symbol does exist there.
strncmp() is a specialized API unsuited for routine copying into
fixed-size buffers. On a system where the length of a single filename
can exceed MAXPGPATH, the pg_archivecleanup change prevents a simple
crash in the subsequent strlen(). Few filesystems support names that
long, and calling pg_archivecleanup with untrusted input is still not a
credible use case. Therefore, no back-patch.
David Rowley
parseRelOptions() tended to leak memory in the caller's context. Most
of the time this doesn't really matter since the caller's context is
at most query-lifespan, and the function won't be invoked very many times.
However, when testing with CLOBBER_CACHE_RECURSIVELY, the same relcache
entry can get rebuilt a *lot* of times in one query, leading to significant
intraquery memory bloat if it has any reloptions. Noted while
investigating a related report from Tomas Vondra.
In passing, get rid of some Asserts that are redundant with the one
done by deconstruct_array().
As with other patches to avoid leaks in CLOBBER_CACHE testing, it doesn't
really seem worth back-patching this.
log_newpage is used by many indexams, in addition to heap, but for
historical reasons it's always been part of the heapam rmgr. Starting with
9.3, we have another WAL record type for logging an image of a page,
XLOG_FPI. Simplify things by moving log_newpage and log_newpage_buffer to
xlog.c, and switch to using the XLOG_FPI record type.
Bump the WAL version number because the code to replay the old HEAP_NEWPAGE
records is removed.
Commit 0ac5ad5134 removed an optimization in multixact.c that skipped
fetching members of MultiXactId that were older than our
OldestVisibleMXactId value. The reason this was removed is that it is
possible for multixacts that contain updates to be older than that
value. However, if the caller is certain that the multi does not
contain an update (because the infomask bits say so), it can pass this
info down to GetMultiXactIdMembers, enabling it to use the old
optimization.
Pointed out by Andres Freund in 20131121200517.GM7240@alap2.anarazel.de
Testing for abortedness of a multixact member that's being frozen is
unnecessary: we only need to know whether the transaction is still in
progress or committed to determine whether it must be kept or not. This
let us simplify the code a bit and avoid a useless TransactionIdDidAbort
test.
Suggested by Andres Freund awhile back.
There were several oversights in recovery code where COMMIT/ABORT PREPARED
records were ignored:
* pg_last_xact_replay_timestamp() (wasn't updated for 2PC commits)
* recovery_min_apply_delay (2PC commits were applied immediately)
* recovery_target_xid (recovery would not stop if the XID used 2PC)
The first of those was reported by Sergiy Zuban in bug #11032, analyzed by
Tom Lane and Andres Freund. The bug was always there, but was masked before
commit d19bd29f07, because COMMIT PREPARED
always created an extra regular transaction that was WAL-logged.
Backpatch to all supported versions (older versions didn't have all the
features and therefore didn't have all of the above bugs).
Nothing in the checkpointer calls InitXLOGAccess(), so WALInsertLocks
never got initialized there. Without EXEC_BACKEND, it works anyway
because the correct value is inherited from the postmaster, but
with EXEC_BACKEND we've got a problem. The problem appears to have
been introduced by commit 68a2e52bba.
To fix, move the relevant initialization steps from InitXLOGAccess()
to XLOGShmemInit(), making this more parallel to what we do
elsewhere.
Amit Kapila
Commit 1b86c81d2d fixed the decoding of toasted columns for the rows
contained in one xl_heap_multi_insert record. But that's not actually
enough, because heap_multi_insert() will actually first toast all
passed in rows and then emit several *_multi_insert records; one for
each page it fills with tuples.
Add a XLOG_HEAP_LAST_MULTI_INSERT flag which is set in
xl_heap_multi_insert->flag denoting that this multi_insert record is
the last emitted by one heap_multi_insert() call. Then use that flag
in decode.c to only set clear_toast_afterwards in the right situation.
Expand the number of rows inserted via COPY in the corresponding
regression test to make sure that more than one heap page is filled
with tuples by one heap_multi_insert() call.
Backpatch to 9.4 like the previous commit.
The old name wasn't very descriptive as of actual contents of the
directory, which are historical snapshots in the snapshots/
subdirectory and mappingdata for rewritten tuples in
mappings/. There's been a fair amount of discussion what would be a
good name. I'm settling for pg_logical because it's likely that
further data around logical decoding and replication will need saving
in the future.
Also add the missing entry for the directory into storage.sgml's list
of PGDATA contents.
Bumps catversion as the data directories won't be compatible.
The previous code, perhaps out of concern for avoid memory leaks, formed
the tuple in one memory context and then copied it to another memory
context. However, this doesn't appear to be necessary, since
index_form_tuple and the functions it calls take precautions against
leaking memory. In my testing, building the tuple directly inside the
sort context shaves several percent off the index build time.
Rearrange things so we do that.
Patch by me. Review by Amit Kapila, Tom Lane, Andres Freund.
The assertion failed if WAL_DEBUG or LWLOCK_STATS was enabled; fix that by
using separate memory contexts for the allocations made within those code
blocks.
This patch introduces a mechanism for marking any memory context as allowed
in a critical section. Previously ErrorContext was exempt as a special case.
Instead of a blanket exception of the checkpointer process, only exempt the
memory context used for the pending ops hash table.
Instead of truncating pg_multixact at vacuum time, do it only at
checkpoint time. The reason for doing it this way is twofold: first, we
want it to delete only segments that we're certain will not be required
if there's a crash immediately after the removal; and second, we want to
do it relatively often so that older files are not left behind if
there's an untimely crash.
Per my proposal in
http://www.postgresql.org/message-id/20140626044519.GJ7340@eldon.alvh.no-ip.org
we now execute the truncation in the checkpointer process rather than as
part of vacuum. Vacuum is in only charge of maintaining in shared
memory the value to which it's possible to truncate the files; that
value is stored as part of checkpoints also, and so upon recovery we can
reuse the same value to re-execute truncate and reset the
oldest-value-still-safe-to-use to one known to remain after truncation.
Per bug reported by Jeff Janes in the course of his tests involving
bug #8673.
While at it, update some comments that hadn't been updated since
multixacts were changed.
Backpatch to 9.3, where persistency of pg_multixact files was
introduced by commit 0ac5ad5134.
Don't assert MultiXactIdIsRunning if the multi came from a tuple that
had been share-locked and later copied over to the new cluster by
pg_upgrade. Doing that causes an error to be raised unnecessarily:
MultiXactIdIsRunning is not open to the possibility that its argument
came from a pg_upgraded tuple, and all its other callers are already
checking; but such multis cannot, obviously, have transactions still
running, so the assert is pointless.
Noticed while investigating the bogus pg_multixact/offsets/0000 file
left over by pg_upgrade, as reported by Andres Freund in
http://www.postgresql.org/message-id/20140530121631.GE25431@alap3.anarazel.de
Backpatch to 9.3, as the commit that introduced the buglet.
Normally, this won't matter too much; but if I/O is really slow, for
example because the system is overloaded, we might write many pages
before checking for interrupts. A single toast insertion might
write up to 1GB of data, and a multi-insert could write hundreds
of tuples (and their corresponding TOAST data).
The existance of the assert_enabled variable (backing the
debug_assertions GUC) reduced the amount of knowledge some static code
checkers (like coverity and various compilers) could infer from the
existance of the assertion. That could have been solved by optionally
removing the assertion_enabled variable from the Assert() et al macros
at compile time when some special macro is defined, but the resulting
complication doesn't seem to be worth the gain from having
debug_assertions. Recompiling is fast enough.
The debug_assertions GUC is still available, but readonly, as it's
useful when diagnosing problems. The commandline/client startup option
-A, which previously also allowed to enable/disable assertions, has
been removed as it doesn't serve a purpose anymore.
While at it, reduce code duplication in bufmgr.c and localbuf.c
assertions checking for spurious buffer pins. That code had to be
reindented anyway to cope with the assert_enabled removal.
Change the order of checks in similar functions to be the same; remove
a parameter that's not needed anymore; rename a memory context and
expand a couple of comments.
Per review comments from Amit Kapila
Previously, the code used a node label of zero both for strings that
contain no bytes beyond the inner tuple's prefix, and for cases where an
"allTheSame" inner tuple has to be split to allow a string with a different
next byte to be inserted into it. Failing to distinguish these cases meant
that if a string ending with the current prefix needed to be inserted into
an allTheSame tuple, we got into an infinite loop, because after splitting
the tuple we'd descend into the child allTheSame tuple and then find we
need to split again.
To fix, instead use -1 and -2 as the node labels for these two cases.
This requires widening the node label type from "char" to int2, but
fortunately SPGiST stores all pass-by-value node label types in their
Datum representation, which means that this change is transparently upward
compatible so far as the on-disk representation goes. We continue to
recognize zero as a dummy node label for reading purposes, but will not
attempt to push new index entries down into such a label, so that the loop
won't occur even when dealing with an existing index.
Per report from Teodor Sigaev. Back-patch to 9.2 where the faulty
code was introduced.
In a50d976254 I already changed this, but got it wrong for the case
where the number of members is larger than the number of entries that
fit in the last page of the last segment.
As reported by Serge Negodyuck in a followup to bug #8673.
It's critical that the backend's idea of LOBLKSIZE match the way data has
actually been divided up in pg_largeobject. While we don't provide any
direct way to adjust that value, doing so is a one-line source code change
and various people have expressed interest recently in changing it. So,
just as with TOAST_MAX_CHUNK_SIZE, it seems prudent to record the value in
pg_control and cross-check that the backend's compiled-in setting matches
the on-disk data.
Also tweak the code in inv_api.c so that fetches from pg_largeobject
explicitly verify that the length of the data field is not more than
LOBLKSIZE. Formerly we just had Asserts() for that, which is no protection
at all in production builds. In some of the call sites an overlength data
value would translate directly to a security-relevant stack clobber, so it
seems worth one extra runtime comparison to be sure.
In the back branches, we can't change the contents of pg_control; but we
can still make the extra checks in inv_api.c, which will offer some amount
of protection against running with the wrong value of LOBLKSIZE.
Previously there's been a mix between 'slotname' and 'slot_name'. It's
not nice to be unneccessarily inconsistent in a new feature. As a post
beta1 initdb now is required in the wake of eeca4cd35e, fix the
inconsistencies.
Most the changes won't affect usage of replication slots because the
majority of changes is around function parameter names. The prominent
exception to that is that the recovery.conf parameter
'primary_slotname' is now named 'primary_slot_name'.
The way the code was written, the padding was copied from uninitialized
memory areas.. Because the structs are local variables in the code where
the WAL records are constructed, making them larger and zeroing the padding
bytes would not make the code very pretty, so rather than fixing this
directly by zeroing out the padding bytes, it seems more clear to not try to
align the tuples in the WAL records. The redo functions are taught to copy
the tuple header to a local variable to avoid unaligned access.
Stable-branches have the same problem, but we can't change the WAL format
there, so fix in master only. Reading a few random extra bytes at the stack
is harmless in practice, so it's not worth crafting a different
back-patchable fix.
Per reports from Kevin Grittner and Andres Freund, using clang static
analyzer and Valgrind, respectively.
The new page deletion code didn't cope with the case the target page's
right sibling was marked half-dead. It failed a sanity check which checked
that the downlinks in the parent page match the lower level, because a
half-dead page has no downlink. To cope, check for that condition, and
just give up on the deletion if it happens. The vacuum will finish the
deletion of the half-dead page when it gets there, and on the next vacuum
after that the empty can be deleted.
Reported by Jeff Janes.
I got the backup block numbers off-by-one in the commit that changed the
way incomplete-splits are handled. I blame the comments, which said
"backup block 1" and "backup block 2", even though the backup blocks
are numbered starting from 0, in the macros and functions used in replay.
Fix the comments and the code.
Per Jeff Janes' bug report about corruption caused by torn page writes.
The incorrect code is new in git master, but backpatch the comment change
down to 9.0, where the numbering in the redo-side macros was changed.
transam/README explained how B-tree incomplete splits were tracked and
fixed after recovery, as an example of handling complex actions that need
multiple WAL records, but that's not how it works anymore. Explain the new
paradigm.
Commit dd428c79 added dbId and tsId to the xl_xact_commit struct but missed
that prepared transaction commits reuse that struct. Fix that.
Because those fields were left unitialized, replaying a commit prepared WAL
record in a hot standby node would fail to remove the relcache init file.
That can lead to "could not open file" errors on the standby. Relcache init
file only needs to be removed when a system table/index is rewritten in the
transaction using two phase commit, so that should be rare in practice. In
HEAD, the incorrect dbId/tsId values are also used for filtering in logical
replication code, causing the transaction to always be filtered out.
Analysis and fix by Andres Freund. Backpatch to 9.0 where hot standby was
introduced.
To lock a prepared transaction's shared memory entry, we used to mark it
with the XID of the backend. When the XID was no longer active according
to the proc array, the entry was implicitly considered as not locked
anymore. However, when preparing a transaction, the backend's proc array
entry was cleared before transfering the locks (and some other state) to
the prepared transaction's dummy PGPROC entry, so there was a window where
another backend could finish the transaction before it was in fact fully
prepared.
To fix, rewrite the locking mechanism of global transaction entries. Instead
of an XID, just have simple locked-or-not flag in each entry (we store the
locking backend's backend id rather than a simple boolean, but that's just
for debugging purposes). The backend is responsible for explicitly unlocking
the entry, and to make sure that that happens, install a callback to unlock
it on abort or process exit.
Backpatch to all supported versions.
rd_replidindex should be managed the same as rd_oidindex, and rd_keyattr
and rd_idattr should be managed like rd_indexattr. Omissions in this area
meant that the bitmapsets computed for rd_keyattr and rd_idattr would be
leaked during any relcache flush, resulting in a slow but permanent leak in
CacheMemoryContext. There was also a tiny probability of relcache entry
corruption if we ran out of memory at just the wrong point in
RelationGetIndexAttrBitmap. Otherwise, the fields were not zeroed where
expected, which would not bother the code any AFAICS but could greatly
confuse anyone examining the relcache entry while debugging.
Also, create an API function RelationGetReplicaIndex rather than letting
non-relcache code be intimate with the mechanisms underlying caching of
that value (we won't even mention the memory leak there).
Also, fix a relcache flush hazard identified by Andres Freund:
RelationGetIndexAttrBitmap must not assume that rd_replidindex stays valid
across index_open.
The aspects of this involving rd_keyattr date back to 9.3, so back-patch
those changes.
Per discussion, this seems like a more consistent choice of name.
Fabrízio de Royes Mello, after a suggestion by Peter Eisentraut;
some additional documentation wordsmithing by me
When returning rows from a bitmap, as done with partial match queries, we
would get stuck in an infinite loop if the bitmap contained a lossy page
reference.
This bug is new in master, it was introduced by the patch to allow skipping
items refuted by other entries in GIN scans.
Report and fix by Alexander Korotkov
To-be-deleted list pages contain no useful information, as they are being
deleted, but we must still protect the writes from being torn by a crash
after a partial write. To do that, re-initialize the pages on WAL replay.
Jeff Janes caught this with a test program to test partial writes.
Backpatch to all supported versions.
If they were not 'oldtup.t_data' would be dereferenced while set to NULL
in case of a full page image for block 0.
Do so primarily to silence coverity; but also to make sure this prerequisite
isn't changed without adapting the replay routine as that would appear to
work in many cases.
Andres Freund
If we have an array of records stored on disk, the individual record fields
cannot contain out-of-line TOAST pointers: the tuptoaster.c mechanisms are
only prepared to deal with TOAST pointers appearing in top-level fields of
a stored row. The same applies for ranges over composite types, nested
composites, etc. However, the existing code only took care of expanding
sub-field TOAST pointers for the case of nested composites, not for other
structured types containing composites. For example, given a command such
as
UPDATE tab SET arraycol = ARRAY[(ROW(x,42)::mycompositetype] ...
where x is a direct reference to a field of an on-disk tuple, if that field
is long enough to be toasted out-of-line then the TOAST pointer would be
inserted as-is into the array column. If the source record for x is later
deleted, the array field value would become a dangling pointer, leading
to errors along the line of "missing chunk number 0 for toast value ..."
when the value is referenced. A reproducible test case for this was
provided by Jan Pecek, but it seems likely that some of the "missing chunk
number" reports we've heard in the past were caused by similar issues.
Code-wise, the problem is that PG_DETOAST_DATUM() is not adequate to
produce a self-contained Datum value if the Datum is of composite type.
Seen in this light, the problem is not just confined to arrays and ranges,
but could also affect some other places where detoasting is done in that
way, for example form_index_tuple().
I tried teaching the array code to apply toast_flatten_tuple_attribute()
along with PG_DETOAST_DATUM() when the array element type is composite,
but this was messy and imposed extra cache lookup costs whether or not any
TOAST pointers were present, indeed sometimes when the array element type
isn't even composite (since sometimes it takes a typcache lookup to find
that out). The idea of extending that approach to all the places that
currently use PG_DETOAST_DATUM() wasn't attractive at all.
This patch instead solves the problem by decreeing that composite Datum
values must not contain any out-of-line TOAST pointers in the first place;
that is, we expand out-of-line fields at the point of constructing a
composite Datum, not at the point where we're about to insert it into a
larger tuple. This rule is applied only to true composite Datums, not
to tuples that are being passed around the system as tuples, so it's not
as invasive as it might sound at first. With this approach, the amount
of code that has to be touched for a full solution is greatly reduced,
and added cache lookup costs are avoided except when there actually is
a TOAST pointer that needs to be inlined.
The main drawback of this approach is that we might sometimes dereference
a TOAST pointer that will never actually be used by the query, imposing a
rather large cost that wasn't there before. On the other side of the coin,
if the field value is used multiple times then we'll come out ahead by
avoiding repeat detoastings. Experimentation suggests that common SQL
coding patterns are unaffected either way, though. Applications that are
very negatively affected could be advised to modify their code to not fetch
columns they won't be using.
In future, we might consider reverting this solution in favor of detoasting
only at the point where data is about to be stored to disk, using some
method that can drill down into multiple levels of nested structured types.
That will require defining new APIs for structured types, though, so it
doesn't seem feasible as a back-patchable fix.
Note that this patch changes HeapTupleGetDatum() from a macro to a function
call; this means that any third-party code using that macro will not get
protection against creating TOAST-pointer-containing Datums until it's
recompiled. The same applies to any uses of PG_RETURN_HEAPTUPLEHEADER().
It seems likely that this is not a big problem in practice: most of the
tuple-returning functions in core and contrib produce outputs that could
not possibly be toasted anyway, and the same probably holds for third-party
extensions.
This bug has existed since TOAST was invented, so back-patch to all
supported branches.
Commit a730183926 created rather a mess by
putting dependencies on backend-only include files into include/common.
We really shouldn't do that. To clean it up:
* Move TABLESPACE_VERSION_DIRECTORY back to its longtime home in
catalog/catalog.h. We won't consider this symbol part of the FE/BE API.
* Push enum ForkNumber from relfilenode.h into relpath.h. We'll consider
relpath.h as the source of truth for fork numbers, since relpath.c was
already partially serving that function, and anyway relfilenode.h was
kind of a random place for that enum.
* So, relfilenode.h now includes relpath.h rather than vice-versa. This
direction of dependency is fine. (That allows most, but not quite all,
of the existing explicit #includes of relpath.h to go away again.)
* Push forkname_to_number from catalog.c to relpath.c, just to centralize
fork number stuff a bit better.
* Push GetDatabasePath from catalog.c to relpath.c; it was rather odd
that the previous commit didn't keep this together with relpath().
* To avoid needing relfilenode.h in common/, redefine the underlying
function (now called GetRelationPath) as taking separate OID arguments,
and make the APIs using RelFileNode or RelFileNodeBackend into macro
wrappers. (The macros have a potential multiple-eval risk, but none of
the existing call sites have an issue with that; one of them had such a
risk already anyway.)
* Fix failure to follow the directions when "init" fork type was added;
specifically, the errhint in forkname_to_number wasn't updated, and neither
was the SGML documentation for pg_relation_size().
* Fix tablespace-path-too-long check in CreateTableSpace() to account for
fork-name component of maximum-length pathnames. This requires putting
FORKNAMECHARS into a header file, but it was rather useless (and
actually unreferenced) where it was.
The last couple of items are potentially back-patchable bug fixes,
if anyone is sufficiently excited about them; but personally I'm not.
Per a gripe from Christoph Berg about how include/common wasn't
self-contained.
In writeListPage, never take a full-page image of the page, because we
have all the information required to re-initialize in the WAL record
anyway. Before this fix, a full-page image was always generated, unless
full_page_writes=off, because when the page is initialized its LSN is
always 0. In stable-branches, keep the code to restore the backup blocks
if they exist, in case that the WAL is generated with an older minor
version, but in master Assert that there are no full-page images.
In the redo routine, add missing "off++". Otherwise the tuples are added
to the page in reverse order. That happens to be harmless because we
always scan and remove all the tuples together, but it was clearly wrong.
Also, it was masked by the first bug unless full_page_writes=off, because
the page was always restored from a full-page image.
Backpatch to all supported versions.
As noted some time ago, the original coding had a typo ("|" for "^")
that made the result less unique than intended. Even the intended
behavior is obsolete since it was based on wanting to produce a
usable value even if we didn't have int64 arithmetic --- a limitation
we stopped supporting years ago. Instead, let's redefine the system
identifier as tv_sec in the upper 32 bits (same as before), tv_usec
in the next 20 bits, and the low 12 bits of getpid() in the remaining
bits. This is still hardly guaranteed-universally-unique, but it's
noticeably better than before. Per my proposal at
<29019.1374535940@sss.pgh.pa.us>
If a tuple is locked, and this lock is later upgraded either to an
update or to a stronger lock, and in the meantime some other process
tries to lock, update or delete the same tuple, it (the tuple) could end
up being updated twice, or having conflicting locks held.
The reason for this is that the second updater checks for a change in
Xmax value, or in the HEAP_XMAX_IS_MULTI infomask bit, after noticing
the first lock; and if there's a change, it restarts and re-evaluates
its ability to update the tuple. But it neglected to check for changes
in lock strength or in lock-vs-update status when those two properties
stayed the same. This would lead it to take the wrong decision and
continue with its own update, when in reality it shouldn't do so but
instead restart from the top.
This could lead to either an assertion failure much later (when a
multixact containing multiple updates is detected), or duplicate copies
of tuples.
To fix, make sure to compare the other relevant infomask bits alongside
the Xmax value and HEAP_XMAX_IS_MULTI bit, and restart from the top if
necessary.
Also, in the belt-and-suspenders spirit, add a check to
MultiXactCreateFromMembers that a multixact being created does not have
two or more members that are claimed to be updates. This should protect
against other bugs that might cause similar bogus situations.
Backpatch to 9.3, where the possibility of multixacts containing updates
was introduced. (In prior versions it was possible to have the tuple
lock upgraded from shared to exclusive, and an update would not restart
from the top; yet we're protected against a bug there because there's
always a sleep to wait for the locking transaction to complete before
continuing to do anything. Really, the fact that tuple locks always
conflicted with concurrent updates is what protected against bugs here.)
Per report from Andrew Dunstan and Josh Berkus in thread at
http://www.postgresql.org/message-id/534C8B33.9050807@pgexperts.com
Bug analysis by Andres Freund.
Once we've completed a PREPARE, our session is not running a transaction,
so its entry in pg_stat_activity should show xact_start as null, rather
than leaving the value as the start time of the now-prepared transaction.
I think possibly this oversight was triggered by faulty extrapolation
from the adjacent comment that says PrepareTransaction should not call
AtEOXact_PgStat, so tweak the wording of that comment.
Noted by Andres Freund while considering bug #10123 from Maxim Boguk,
although this error doesn't seem to explain that report.
Back-patch to all active branches.
When marking a branch as half-dead, a pointer to the top of the branch is
stored in the leaf block's hi-key. During normal operation, the high key
was left in place, and the block number was just stored in the ctid field
of the high key tuple, but in WAL replay, the high key was recreated as a
truncated tuple with zero columns. For the sake of easier debugging, also
truncate the tuple in normal operation, so that the page is identical
after WAL replay. Also, rename the 'downlink' field in the WAL record to
'topparent', as that seems like a more descriptive name. And make sure
it's set to invalid when unlinking the leaf page.
Forgot to update LSN of left sibling's page, when creating a new root.
I fixed this for regular insertions and page splits earlier, but missed
new root creation.
The README incorrectly claimed that GIN posting tree pages contain an array
of uncompressed items in addition to compressed posting lists. Earlier
versions of the GIN posting list compression patch worked that way, but not
the one that was committed.
I mixed up BLCKSZ and XLOG_BLCKSZ when I changed the way the buffer is
allocated a couple of weeks ago. With the default settings, they are both
8k, but they can be changed at compile-time.
This allows squeezing out the unused space in full-page writes. And more
importantly, it can be a useful debugging aid.
In hindsight we should've done this back when GIN was added - we wouldn't
need the 'maxoff' field in the page opaque struct if we had used pd_lower
and pd_upper like on normal pages. But as long as there can be pages in the
index that have been binary-upgraded from pre-9.4 versions, we can't rely
on that, and have to continue using 'maxoff'.
Most of the code churn comes from renaming some macros, now that they're
used on internal pages, too.
This change is completely backwards-compatible, no effect on pg_upgrade.
Make sure we throw an error instead of silently doing the wrong thing when
fed a strategy number we don't recognize. Also, in the places that did
already throw an error, spell the error message in a way more consistent
with our message style guidelines.
Per report from Paul Jones. Although this is a bug, it won't occur unless
a superuser tries to do something he shouldn't, so it doesn't seem worth
back-patching.
The entry B-tree pages all follow the standard page layout. The 9.3 code has
this right. I inadvertently changed this at some point during the big
refactorings in git master.
There were a couple of bugs here. First, if the fuzzy limit was exceeded,
the loop in entryGetItem might drop out too soon if a whole block needs to
be skipped because it's < advancePast ("continue" in a while-loop checks the
loop condition too). Secondly, the loop checked when stepping to a new page
that there is at least one offset on the page < advancePast, but we cannot
rely on that on subsequent calls of entryGetItem, because advancePast might
change in between. That caused the skipping loop to read bogus items in the
TbmIterateResult's offset array.
First item and fix by Alexander Korotkov, second bug pointed out by Fabrízio
de Royes Mello, by a small variation of Alexander's test query.
Don't reset the rightlink of a page when replaying a page update record.
This was a leftover from pre-hot standby days, when it was not possible to
have scans concurrent with WAL replay. Resetting the right-link was not
necessary back then either, but it was done for the sake of tidiness. But
with hot standby, it's wrong, because a concurrent scan might still need it.
Backpatch all versions with hot standby, 9.0 and above.
Forgot to set the incomplete-split flag on the left page half, in redo of a
page split.
Spotted this by comparing the page contents on master and standby, after
inserting/applying each WAL record.
Also add a regression test for a GIN index with enough items with the same
key, so that a GIN posting tree gets created. Apparently none of the
existing GIN tests were large enough for that.
This code is new, no backpatching required.
GetVirtualXIDsDelayingChkpt calls palloc, which isn't safe in a critical
section. I thought I covered this case with the exemption for the
checkpointer, but CreateCheckPoint is also called from the startup process.
Memory allocation can fail if you run out of memory, and inside a critical
section that will lead to a PANIC. Use conservatively-sized arrays in stack
instead.
There was previously no explicit limit on the number of pages a GiST split
can produce, it was only limited by the number of LWLocks that can be held
simultaneously (100 at the moment). This patch adds an explicit limit of 75
pages. That should be plenty, a typical split shouldn't produce more than
2-3 page halves.
The bug has been there forever, but only backpatch down to 9.1. The code
was changed significantly in 9.1, and it doesn't seem worth the risk or
trouble to adapt this for 9.0 and 8.4.
Inserting a downlink to an internal page clears the incomplete-split flag
of the child's left sibling, so the left sibling's LSN also needs to be
updated and it needs to be marked dirty. The codepath for an insertion got
this right, but the case where the internal node is split because of
inserting the new downlink missed that.
Inserting a downlink to an internal page clears the incomplete-split flag
of the child's left sibling, so the left sibling's LSN also needs to be
updated.
Inserting (in retail) into the new 9.4 format GIN posting tree created much
larger WAL records than in 9.3. The previous strategy to WAL logging was
basically to log the whole page on each change, with the exception of
completely unmodified segments up to the first modified one. That was not
too bad when appending to the end of the page, as only the last segment had
to be WAL-logged, but per Fujii Masao's testing, even that produced 2x the
WAL volume that 9.3 did.
The new strategy is to keep track of changes to the posting lists in a more
fine-grained fashion, and also make the repacking" code smarter to avoid
decoding and re-encoding segments unnecessarily.
If you compile with WAL_DEBUG and enable it with wal_debug=on, we used to
only pass the first XLogRecData entry to the rm_desc routine. I think the
original assumprion was that the first XLogRecData entry contains all the
necessary information for the rm_desc routine, but that's a pretty shaky
assumption. At least standby_redo didn't get the memo.
To fix, piece together all the data in a temporary buffer, and pass that to
the rm_desc routine.
It's been like this forever, but the patch didn't apply cleanly to
back-branches. Probably wouldn't be hard to fix the conflicts, but it's
not worth the trouble.
equalTupleDescs() neglected both of these ConstrCheck fields, and
CreateTupleDescCopyConstr() neglected ccnoinherit. At this time, the
only known behavior defect resulting from these omissions is constraint
exclusion disregarding a CHECK constraint validated by an ALTER TABLE
VALIDATE CONSTRAINT statement issued earlier in the same transaction.
Back-patch to 9.2, where these fields were introduced.
The special feature the XLogInsert slots had over regular LWLocks is the
insertingAt value that was updated atomically with releasing backends
waiting on it. Add new functions to the LWLock API to do that, and replace
the slots with LWLocks. This reduces the amount of duplicated code.
(There's still some duplication, but at least it's all in lwlock.c now.)
Reviewed by Andres Freund.
With this in place, a session blocking behind another one because of
tuple locks will get a context line mentioning the relation name, tuple
TID, and operation being done on tuple. For example:
LOG: process 11367 still waiting for ShareLock on transaction 717 after 1000.108 ms
DETAIL: Process holding the lock: 11366. Wait queue: 11367.
CONTEXT: while updating tuple (0,2) in relation "foo"
STATEMENT: UPDATE foo SET value = 3;
Most usefully, the new line is displayed by log entries due to
log_lock_waits, although of course it will be printed by any other log
message as well.
Author: Christian Kruse, some tweaks by Álvaro Herrera
Reviewed-by: Amit Kapila, Andres Freund, Tom Lane, Robert Haas
It is no longer used, none of the resource managers have multi-record
actions that would make it unsafe to perform a restartpoint.
Also don't allow rm_cleanup to write WAL records, it's also no longer
required. Move the call to rm_cleanup routines to make it more symmetric
with rm_startup.
Splitting a page consists of two separate steps: splitting the child page,
and inserting the downlink for the new right page to the parent. Previously,
we handled the case that you crash in between those steps with a cleanup
routine after the WAL recovery had finished, which finished the incomplete
split. However, that doesn't help if the page split is interrupted but the
database doesn't crash, so that you don't perform WAL recovery. That could
happen for example if you run out of disk space.
Remove the end-of-recovery cleanup step. Instead, when a page is split, the
left page is marked with a new INCOMPLETE_SPLIT flag, and when the downlink
is inserted to the parent, the flag is cleared again. If an insertion sees
a page with the flag set, it knows that the split was interrupted for some
reason, and inserts the missing downlink before proceeding.
I used the same approach to fix GIN and GiST split algorithms earlier. This
was the last WAL cleanup routine, so we could get rid of that whole
machinery now, but I'll leave that for a separate patch.
Reviewed by Peter Geoghegan.
In short, we don't allow a page to be deleted if it's the rightmost child
of its parent, but that situation can change after we check for it.
Problem
-------
We check that the page to be deleted is not the rightmost child of its
parent, and then lock its left sibling, the page itself, its right sibling,
and the parent, in that order. However, if the parent page is split after
the check but before acquiring the locks, the target page might become the
rightmost child, if the split happens at the right place. That leads to an
error in vacuum (I reproduced this by setting a breakpoint in debugger):
ERROR: failed to delete rightmost child 41 of block 3 in index "foo_pkey"
We currently re-check that the page is still the rightmost child, and throw
the above error if it's not. We could easily just give up rather than throw
an error, but that approach doesn't scale to half-dead pages. To recap,
although we don't normally allow deleting the rightmost child, if the page
is the *only* child of its parent, we delete the child page and mark the
parent page as half-dead in one atomic operation. But before we do that, we
check that the parent can later be deleted, by checking that it in turn is
not the rightmost child of the grandparent (potentially recursing all the
way up to the root). But the same situation can arise there - the
grandparent can be split while we're not holding the locks. We end up with
a half-dead page that we cannot delete.
To make things worse, the keyspace of the deleted page has already been
transferred to its right sibling. As the README points out, the keyspace at
the grandparent level is "out-of-whack" until the half-dead page is deleted,
and if enough tuples with keys in the transferred keyspace are inserted, the
page might get split and a downlink might be inserted into the grandparent
that is out-of-order. That might not cause any serious problem if it's
transient (as the README ponders), but is surely bad if it stays that way.
Solution
--------
This patch changes the page deletion algorithm to avoid that problem. After
checking that the topmost page in the chain of to-be-deleted pages is not
the rightmost child of its parent, and then deleting the pages from bottom
up, unlink the pages from top to bottom. This way, the intermediate stages
are similar to the intermediate stages in page splitting, and there is no
transient stage where the keyspace is "out-of-whack". The topmost page in
the to-be-deleted chain doesn't have a downlink pointing to it, like a page
split before the downlink has been inserted.
This also allows us to get rid of the cleanup step after WAL recovery, if we
crash during page deletion. The deletion will be continued at next VACUUM,
but the tree is consistent for searches and insertions at every step.
This bug is old, all supported versions are affected, but this patch is too
big to back-patch (and changes the WAL record formats of related records).
We have not heard any reports of the bug from users, so clearly it's not
easy to bump into. Maybe backpatch later, after this has had some field
testing.
Reviewed by Kevin Grittner and Peter Geoghegan.
When a row is updated, and the new tuple version is put on the same page as
the old one, only WAL-log the part of the new tuple that's not identical to
the old. This saves significantly on the amount of WAL that needs to be
written, in the common case that most fields are not modified.
Amit Kapila, with a lot of back and forth with me, Robert Haas, and others.
With the GIN "fast scan" feature, GIN can skip items without fetching all
the keys for them, if it can prove that they don't match regardless of
those keys. So far, it has done the proving by calling the boolean
consistent function with all combinations of TRUE/FALSE for the unfetched
keys, but since that's O(n^2), it becomes unfeasible with more than a few
keys. We can avoid calling consistent with all the combinations, if we can
tell the operator class implementation directly which keys are unknown.
This commit includes a triConsistent function for the built-in array and
tsvector opclasses.
Alexander Korotkov, with some changes by me.
We don't take a full-page image of the GIN metapage; instead, the WAL record
contains all the information required to reconstruct it from scratch. But
to avoid torn page hazards, we must re-initialize it from the WAL record
every time, even if it already has a greater LSN, similar to how normal full
page images are restored.
This was highly unlikely to cause any problems in practice, because the GIN
metapage is small. We rely on an update smaller than a 512 byte disk sector
to be atomic elsewhere, at least in pg_control. But better safe than sorry,
and this would be easy to overlook if more fields are added to the metapage
so that it's no longer small.
Reported by Noah Misch. Backpatch to all supported versions.
A fake relcache entry can "own" a SmgrRelation object, like a regular
relcache entry. But when it was free'd, the owner field in SmgrRelation
was not cleared, so it was left pointing to free'd memory.
Amazingly this apparently hasn't caused crashes in practice, or we would've
heard about it earlier. Andres found this with Valgrind.
Report and fix by Andres Freund, with minor modifications by me. Backpatch
to all supported versions.
CheckRequiredParameterValues() should perform the checks if archive recovery
was requested, even if we are going to perform crash recovery first.
Reported by Kyotaro HORIGUCHI. Backpatch to 9.2, like the crash-then-archive
recovery mode.
When entering crash recovery followed by archive recovery, and the latest
checkpoint is a shutdown checkpoint, and there are no more WAL records to
replay before transitioning from crash to archive recovery, we would not
immediately allow read-only connections in hot standby mode even if we
could. That's because when starting from a shutdown checkpoint, we set
lastReplayedEndRecPtr incorrectly to the record before the checkpoint
record, instead of the checkpoint record itself. We don't run the redo
routine of the shutdown checkpoint record, but starting recovery from it
goes through the same motions, so it should be considered as replayed.
Reported by Kyotaro HORIGUCHI. All versions with hot standby are affected,
so backpatch to 9.0.
This feature, building on previous commits, allows the write-ahead log
stream to be decoded into a series of logical changes; that is,
inserts, updates, and deletes and the transactions which contain them.
It is capable of handling decoding even across changes to the schema
of the effected tables. The output format is controlled by a
so-called "output plugin"; an example is included. To make use of
this in a real replication system, the output plugin will need to be
modified to produce output in the format appropriate to that system,
and to perform filtering.
Currently, information can be extracted from the logical decoding
system only via SQL; future commits will add the ability to stream
changes via walsender.
Andres Freund, with review and other contributions from many other
people, including Álvaro Herrera, Abhijit Menon-Sen, Peter Gheogegan,
Kevin Grittner, Robert Haas, Heikki Linnakangas, Fujii Masao, Abhijit
Menon-Sen, Michael Paquier, Simon Riggs, Craig Ringer, and Steve
Singer.
Commit abf5c5c9a4 added a bogus while-
statement after the for(;;)-loop. It went unnoticed in testing, because
it was dead code.
Report by KONDO Mitsumasa. Backpatch to 9.3. The commit that introduced
this was also applied to 9.2, but not the bogus while-loop part, because
the code in 9.2 looks quite different.
We were resetting the tuple's HEAP_HOT_UPDATED flag as well as t_ctid on
WAL replay of a tuple-lock operation, which is incorrect when the tuple
is already updated.
Back-patch to 9.3. The clearing of both header elements was there
previously, but since no update could be present on a tuple that was
being locked, it was harmless.
Bug reported by Peter Geoghegan and Greg Stark in
CAM3SWZTMQiCi5PV5OWHb+bYkUcnCk=O67w0cSswPvV7XfUcU5g@mail.gmail.com and
CAM-w4HPTOeMT4KP0OJK+mGgzgcTOtLRTvFZyvD0O4aH-7dxo3Q@mail.gmail.com
respectively; diagnosis by Andres Freund.
The functions in slotfuncs.c don't exist in any released version,
but the changes to xlogfuncs.c represent backward-incompatibilities.
Per discussion, we're hoping that the queries using these functions
are few enough and simple enough that this won't cause too much
breakage for users.
Michael Paquier, reviewed by Andres Freund and further modified
by me.
Coverity identified a number of places in which it couldn't prove that a
string being copied into a fixed-size buffer would fit. We believe that
most, perhaps all of these are in fact safe, or are copying data that is
coming from a trusted source so that any overrun is not really a security
issue. Nonetheless it seems prudent to forestall any risk by using
strlcpy() and similar functions.
Fixes by Peter Eisentraut and Jozef Mlich based on Coverity reports.
In addition, fix a potential null-pointer-dereference crash in
contrib/chkpass. The crypt(3) function is defined to return NULL on
failure, but chkpass.c didn't check for that before using the result.
The main practical case in which this could be an issue is if libc is
configured to refuse to execute unapproved hashing algorithms (e.g.,
"FIPS mode"). This ideally should've been a separate commit, but
since it touches code adjacent to one of the buffer overrun changes,
I included it in this commit to avoid last-minute merge issues.
This issue was reported by Honza Horak.
Security: CVE-2014-0065 for buffer overruns, CVE-2014-0066 for crypt()
If there is a WAL segment with same ID but different TLI present in both
the WAL archive and pg_xlog, prefer the one with higher TLI. Before this
patch, the archive was polled first, for all expected TLIs, and only if no
file was found was pg_xlog scanned. This was a change in behavior from 9.3,
which first scanned archive and pg_xlog for the highest TLI, then archive
and pg_xlog for the next highest TLI and so forth. This patch reverts the
behavior back to what it was in 9.2.
The reason for this is that if for example you try to do archive recovery
to timeline 2, which branched off timeline 1, but the WAL for timeline 2 is
not archived yet, we would replay past the timeline switch point on
timeline 1 using the archived files, before even looking timeline 2's files
in pg_xlog
Report and patch by Kyotaro Horiguchi. Backpatch to 9.3 where the behavior
was changed.
Previously we were piggybacking on transaction ID parameters to freeze
multixacts; but since there isn't necessarily any relationship between
rates of Xid and multixact consumption, this turns out not to be a good
idea.
Therefore, we now have multixact-specific freezing parameters:
vacuum_multixact_freeze_min_age: when to remove multis as we come across
them in vacuum (default to 5 million, i.e. early in comparison to Xid's
default of 50 million)
vacuum_multixact_freeze_table_age: when to force whole-table scans
instead of scanning only the pages marked as not all visible in
visibility map (default to 150 million, same as for Xids). Whichever of
both which reaches the 150 million mark earlier will cause a whole-table
scan.
autovacuum_multixact_freeze_max_age: when for cause emergency,
uninterruptible whole-table scans (default to 400 million, double as
that for Xids). This means there shouldn't be more frequent emergency
vacuuming than previously, unless multixacts are being used very
rapidly.
Backpatch to 9.3 where multixacts were made to persist enough to require
freezing. To avoid an ABI break in 9.3, VacuumStmt has a couple of
fields in an unnatural place, and StdRdOptions is split in two so that
the newly added fields can go at the end.
Patch by me, reviewed by Robert Haas, with additional input from Andres
Freund and Tom Lane.
In a database that's not yet reached consistency, it's possible that some
segments of a relation are not full-size but are not the last ones either.
Because of the way smgrnblocks() works, asking for a new page with P_NEW
will fill in the last not-full-size segment --- and if that makes it full
size, the apparent EOF of the relation will increase by more than one page,
so that the next P_NEW request will yield a page past the next consecutive
one. This breaks the relation-extension logic in XLogReadBufferExtended,
possibly allowing a page update to be applied to some page far past where
it was intended to go. This appears to be the explanation for reports of
table bloat on replication slaves compared to their masters, and probably
explains some corrupted-slave reports as well.
Fix the loop to check the page number it actually got, rather than merely
Assert()'ing that dead reckoning got it to the desired place. AFAICT,
there are no other places that make assumptions about exactly which page
they'll get from P_NEW.
Problem identified by Greg Stark, though this is not the same as his
proposed patch.
It's been like this for a long time, so back-patch to all supported
branches.
WakeupWaiters() is supposed to wake up all LW_WAIT_UNTIL_FREE waiters of
the slot, but the loop incorrectly also woke up the first LW_EXCLUSIVE
waiter, if there was no LW_WAIT_UNTIL_FREE waiters in the queue.
Noted by Andres Freund. This code is new in 9.4, so no backpatching.
The shimTriConstistentFn, which calls the opclass's consistent function with
all combinations of TRUE/FALSE for any MAYBE argument, modifies the entryRes
array passed by the caller. Change startScanKey to re-initialize it between
each call to accommodate that.
It's actually a bad habit by shimTriConsistentFn to modify its argument. But
the only caller that doesn't already re-initialize the entryRes array was
startScanKey, and it's easy for startScanKey to do so. Add a comment to
shimTriConsistentFn about that.
Note: this does not give a free pass to opclass-provided consistent
functions to modify the entryRes argument; shimTriConsistent assumes that
they don't, even though it does it itself.
While at it, refactor startScanKey to allocate the requiredEntries and
additionalEntries after it knows exactly how large they need to be. Saves a
little bit of memory, and looks nicer anyway.
Per complaint by Tom Lane, buildfarm and the pg_trgm regression test.
If you have a GIN query like "rare & frequent", we currently fetch all the
items that match either rare or frequent, call the consistent function for
each item, and let the consistent function filter out items that only match
one of the terms. However, if we can deduce that "rare" must be present for
the overall qual to be true, we can scan all the rare items, and for each
rare item, skip over to the next frequent item with the same or greater TID.
That greatly speeds up "rare & frequent" type queries.
To implement that, introduce the concept of a tri-state consistent function,
where the 3rd value is MAYBE, indicating that we don't know if that term is
present. Operator classes only provide a boolean consistent function, so we
simulate the tri-state consistent function by calling the boolean function
several times, with the MAYBE arguments set to all combinations of TRUE and
FALSE. Testing all combinations is only feasible for a small number of MAYBE
arguments, but it is envisioned that we'll provide a way for operator
classes to provide a native tri-state consistent function, which can be much
more efficient. But that is not included in this patch.
We were already using that trick to for lossy pages, calling the consistent
function with the lossy entry set to TRUE and FALSE. Now that we have the
tri-state consistent function, use it for lossy pages too.
Alexander Korotkov, with fair amount of refactoring by me.
These flushes were added in my commit d2896a9ed, which added the btree
logic that keeps a cached copy of the index metapage data in index relcache
entries. The idea was to ensure that other backends would promptly update
their cached copies after a change. However, this is not really necessary,
since _bt_getroot() has adequate defenses against believing a stale root
page link, and _bt_getrootheight() doesn't have to be 100% right.
Moreover, if it were necessary, a relcache flush would be an unreliable way
to do it, since the sinval mechanism believes that relcache flush requests
represent transactional updates, and therefore discards them on transaction
rollback. Therefore, we might as well drop these flush requests and save
the time to rebuild the whole relcache entry after a metapage change.
If we ever try to support in-place truncation of btree indexes, it might
be necessary to revisit this issue so that _bt_getroot() can't get caught
by trying to follow a metapage link to a page that no longer exists.
A possible solution to that is to make use of an smgr, rather than
relcache, inval request to force other backends to discard their cached
metapages. But for the moment this is not worth pursuing.
Replication slots are a crash-safe data structure which can be created
on either a master or a standby to prevent premature removal of
write-ahead log segments needed by a standby, as well as (with
hot_standby_feedback=on) pruning of tuples whose removal would cause
replication conflicts. Slots have some advantages over existing
techniques, as explained in the documentation.
In a few places, we refer to the type of replication slots introduced
by this patch as "physical" slots, because forthcoming patches for
logical decoding will also have slots, but with somewhat different
properties.
Andres Freund and Robert Haas
When skipping over some items in a posting tree, re-find the new location
by descending the tree from root, rather than walking the right links.
This can save a lot of I/O.
Heavily modified from Alexander Korotkov's fast scan patch.
If we're skipping past a certain TID, avoid decoding posting list segments
that only contain smaller TIDs.
Extracted from Alexander Korotkov's fast scan patch, heavily modified.
In a multi-key search, ie. something like "col @> 'foo' AND col @> 'bar'",
as soon as we find the next item that matches the first criteria, we don't
need to check the second criteria for TIDs smaller the first match. That
saves a lot of effort, especially if one of the terms is rare, while the
second occurs very frequently.
Based on ideas from Alexander Korotkov's fast scan patch.
This makes it possible to store lwlocks as part of some other data
structure in the main shared memory segment, or in a dynamic shared
memory segment. There is still a main LWLock array and this patch does
not move anything out of it, but it provides necessary infrastructure
for doing that in the future.
This change is likely to increase the size of LWLockPadded on some
platforms, especially 32-bit platforms where it was previously only
16 bytes.
Patch by me. Review by Andres Freund and KaiGai Kohei.
This allows ending recovery as a consistent state has been reached. Without
this, there was no easy way to e.g restore an online backup, without
replaying any extra WAL after the backup ended.
MauMau and me.
The maxoff field is not used in the new, compressed page format. Let's
reset it when converting an old-format page to the new format. The code
won't care either way, but this makes it possible to use the field for
something else in the future.
When vacuuming a data leaf page, any compressed posting lists that are not
modified, are copied back to the buffer from a later location in the same
buffer rather than from a palloc'd copy. IOW, they are just moved
downwards in the same buffer. Because the source and destination addresses
can overlap, we must use memmove rather than memcpy.
Report and fix by Alexander Korotkov.
Since C99, it's been standard for printf and friends to accept a "z" size
modifier, meaning "whatever size size_t has". Up to now we've generally
dealt with printing size_t values by explicitly casting them to unsigned
long and using the "l" modifier; but this is really the wrong thing on
platforms where pointers are wider than longs (such as Win64). So let's
start using "z" instead. To ensure we can do that on all platforms, teach
src/port/snprintf.c to understand "z", and add a configure test to force
use of that implementation when the platform's version doesn't handle "z".
Having done that, modify a bunch of places that were using the
unsigned-long hack to use "z" instead. This patch doesn't pretend to have
gotten everyplace that could benefit, but it catches many of them. I made
an effort in particular to ensure that all uses of the same error message
text were updated together, so as not to increase the number of
translatable strings.
It's possible that this change will result in format-string warnings from
pre-C99 compilers. We might have to reconsider if there are any popular
compilers that will warn about this; but let's start by seeing what the
buildfarm thinks.
Andres Freund, with a little additional work by me
The Sparc machines in the buildfarm are crashing because of misaligned
access to posting lists stored in entry tuples.
I accidentally removed a critical SHORTALIGN() from ginFormTuple, as part
of the packed posting lists patch. Perhaps I thought it was unnecessary,
because the index_form_tuple() call above the SHORTALIGN already aligned
the size, missing the fact that the null-category byte makes it misaligned
again (I think the SHORTALIGN is indeed unnecessary if there's no null-
category byte, but let's just play it safe...)
GIN posting lists are now encoded using varbyte-encoding, which allows them
to fit in much smaller space than the straight ItemPointer array format used
before. The new encoding is used for both the lists stored in-line in entry
tree items, and in posting tree leaf pages.
To maintain backwards-compatibility and keep pg_upgrade working, the code
can still read old-style pages and tuples. Posting tree leaf pages in the
new format are flagged with GIN_COMPRESSED flag, to distinguish old and new
format pages. Likewise, entry tree tuples in the new format have a
GIN_ITUP_COMPRESSED flag set in a bit that was previously unused.
This patch bumps GIN_CURRENT_VERSION from 1 to 2. New indexes created with
version 9.4 will therefore have version number 2 in the metapage, while old
pg_upgraded indexes will have version 1. The code treats them the same, but
it might be come handy in the future, if we want to drop support for the
uncompressed format.
Alexander Korotkov and me. Reviewed by Tomas Vondra and Amit Langote.
In ordinary operation, VACUUM must be careful to take a cleanup lock on
each leaf page of a btree index; this ensures that no indexscans could
still be "in flight" to heap tuples due to be deleted. (Because of
possible index-tuple motion due to concurrent page splits, it's not enough
to lock only the pages we're deleting index tuples from.) In Hot Standby,
the WAL replay process must likewise lock every leaf page. There were
several bugs in the code for that:
* The replay scan might come across unused, all-zero pages in the index.
While btree_xlog_vacuum itself did the right thing (ie, nothing) with
such pages, xlogutils.c supposed that such pages must be corrupt and
would throw an error. This accounts for various reports of replication
failures with "PANIC: WAL contains references to invalid pages". To
fix, add a ReadBufferMode value that instructs XLogReadBufferExtended
not to complain when we're doing this.
* btree_xlog_vacuum performed the extra locking if standbyState ==
STANDBY_SNAPSHOT_READY, but that's not the correct test: we won't open up
for hot standby queries until the database has reached consistency, and
we don't want to do the extra locking till then either, for fear of reading
corrupted pages (which bufmgr.c would complain about). Fix by exporting a
new function from xlog.c that will report whether we're actually in hot
standby replay mode.
* To ensure full coverage of the index in the replay scan, btvacuumscan
would emit a dummy WAL record for the last page of the index, if no
vacuuming work had been done on that page. However, if the last page
of the index is all-zero, that would result in corruption of said page,
since the functions called on it weren't prepared to handle that case.
There's no need to lock any such pages, so change the logic to target
the last normal leaf page instead.
The first two of these bugs were diagnosed by Andres Freund, the other one
by me. Fixes based on ideas from Heikki Linnakangas and myself.
This has been wrong since Hot Standby was introduced, so back-patch to 9.0.
The new MultiXact freezing routines introduced by commit 8e9a16ab8f
neglected to consider tuples that came from a pg_upgrade'd database; a
vacuum run that tried to freeze such tuples would die with an error such
as
ERROR: MultiXactId 11415437 does no longer exist -- apparent wraparound
To fix, ensure that GetMultiXactIdMembers is allowed to return empty
multis when the infomask bits are right, as is done in other callsites.
Per trouble report from F-Secure.
In passing, fix a copy&paste bug reported by Andrey Karpov from VIVA64
from their PVS-Studio static checked, that instead of setting relminmxid
to Invalid, we were setting relfrozenxid twice. Not an important
mistake because that code branch is about relations for which we don't
use the frozenxid/minmxid values at all in the first place, but seems to
warrants a fix nonetheless.
Makes the replay loop slightly more readable, by separating the concerns of
whether to stop and whether to delay, and how to extract the timestamp from
a record.
This has the user-visible change that the timestamp of the last applied
record is now updated after actually applying it. Before, it was updated
just before applying it. That meant that pg_last_xact_replay_timestamp()
could return the timestamp of a commit record that is in process of being
replayed, but not yet applied. Normally the difference is small, but if
min_recovery_apply_delay is set, there could be a significant delay between
reading a record and applying it.
Another behavioral change is that if you recover to a restore point, we stop
after the restore point record, not before it. It makes no difference as far
as running queries on the server is concerned, as applying a restore point
record changes nothing, but if examine the timeline history you will see
that the new timeline branched off just after the restore point record, not
before it. One practical consequence is that if you do PITR to the new
timeline, and set recovery target to the same named restore point again, it
will find and stop recovery at the same restore point. Conceptually, I think
it makes more sense to consider the restore point as part of the new
timeline's history than not.
In principle, setting the last-replayed timestamp before actually applying
the record was a bug all along, but it doesn't seem worth the risk to
backpatch, since min_recovery_apply_delay was only added in 9.4.
If pause_at_recovery_target is set, recovery pauses *before* applying the
target record, even if recovery_target_inclusive is set. If you then
continue with pg_xlog_replay_resume(), it will apply the target record
before ending recovery. In other words, if you log in while it's paused
and verify that the database looks OK, ending recovery changes its state
again, possibly destroying data that you were tring to salvage with PITR.
Backpatch to 9.1, this has been broken since pause_at_recovery_target was
added.
The docs say that only one of recovery_target_xid, recovery_target_time, or
recovery_target_name can be specified. But the code actually did something
different, so that a name overrode time, and xid overrode both time and name.
Now the target specified last takes effect, whether it's an xid, time or
name.
With this patch, we still accept multiple recovery_target settings, even
though docs say that only one can be specified. It's a general property of
the recovery.conf file parser that you if you specify the same option twice,
the last one takes effect, like with postgresql.conf.
When starting WAL replay from an online checkpoint, the last replayed WAL
record variable was initialized using the checkpoint record's location, even
though the records between the REDO location and the checkpoint record had
not been replayed yet. That was noted as "slightly confusing" but harmless
in the comment, but in some cases, it fooled CheckRecoveryConsistency to
incorrectly conclude that we had already reached a consistent state
immediately at the beginning of WAL replay. That caused the system to accept
read-only connections in hot standby mode too early, and also PANICs with
message "WAL contains references to invalid pages".
Fix by initializing the variables to the REDO location instead.
In 9.2 and above, change CheckRecoveryConsistency() to use
lastReplayedEndRecPtr variable when checking if backup end location has
been reached. It was inconsistently using EndRecPtr for that check, but
lastReplayedEndRecPtr when checking min recovery point. It made no
difference before this patch, because in all the places where
CheckRecoveryConsistency was called the two variables were the same, but
it was always an accident waiting to happen, and would have been wrong
after this patch anyway.
Report and analysis by Tomonari Katsumata, bug #8686. Backpatch to 9.0,
where hot standby was introduced.
And the same for do_pg_stop_backup. The code in do_pg_* is not allowed
to access the catalogs. For manual base backups, the permissions
check can be handled in the calling function, and for streaming
base backups only users with the required permissions can get past
the authentication step in the first place.
Reported by Antonin Houska, diagnosed by Andres Freund
Original users of slru.c were all producing 4-digit filenames, so that
was all that that code was prepared to handle. Changes to multixact.c
in the course of commit 0ac5ad5134 made pg_multixact/members create
5-digit filenames once a certain threshold was reached, which
SlruScanDirectory wasn't prepared to deal with; in particular,
5-digit-name files were not removed during truncation. Change that
routine to make it aware of those files, and have it process them just
like any others.
Right now, some pg_multixact/members directories will contain a mixture
of 4-char and 5-char filenames. A future commit is expected fix things
so that each slru.c user declares the correct maximum width for the
files it produces, to avoid such unsightly mixtures.
Noticed while investigating bug #8673 reported by Serge Negodyuck.
In the 9.2 code for extending multixact/members, the logic was very
simple because the number of entries in a members page was a proper
divisor of 2^32, and thus at 2^32 wraparound the logic for page switch
was identical than at any other page boundary. In commit 0ac5ad5134 I
failed to realize this and introduced code that was not able to go over
the 2^32 boundary. Fix that by ensuring that when we reach the last
page of the last segment we correctly zero the initial page of the
initial segment, using correct uint32-wraparound-safe arithmetic.
Noticed while investigating bug #8673 reported by Serge Negodyuck, as
diagnosed by Andres Freund.
In pg_multixact/members, relying on modulo-2^32 arithmetic for
wraparound handling doesn't work all that well. Because we don't
explicitely track wraparound of the allocation counter for members, it
is possible that the "live" area exceeds 2^31 entries; trying to remove
SLRU segments that are "old" according to the original logic might lead
to removal of segments still in use. To fix, have the truncation
routine use a tailored SlruScanDirectory callback that keeps track of
the live area in actual use; that way, when the live range exceeds 2^31
entries, the oldest segments still live will not get removed untimely.
This new SlruScanDir callback needs to take care not to remove segments
that are "in the future": if new SLRU segments appear while the
truncation is ongoing, make sure we don't remove them. This requires
examination of shared memory state to recheck for false positives, but
testing suggests that this doesn't cause a problem. The original coding
didn't suffer from this pitfall because segments created when truncation
is running are never considered to be removable.
Per Andres Freund's investigation of bug #8673 reported by Serge
Negodyuck.
We haven't wanted to do this in the past on the grounds that in rare
cases the original xmin value will be needed for forensic purposes, but
commit 37484ad2aa removes that objection,
so now we can.
Per extensive discussion, among many people, on pgsql-hackers.
Commit 37484ad2aa invalidated a good
chunk of documentation, so patch it up to reflect the new state of
play. Along the way, patch remaining documentation references to
FrozenXID to say instead FrozenTransactionId, so that they match the
way we actually spell it in the code.
Instead of changing the tuple xmin to FrozenTransactionId, the combination
of HEAP_XMIN_COMMITTED and HEAP_XMIN_INVALID, which were previously never
set together, is now defined as HEAP_XMIN_FROZEN. A variety of previous
proposals to freeze tuples opportunistically before vacuum_freeze_min_age
is reached have foundered on the objection that replacing xmin by
FrozenTransactionId might hinder debugging efforts when things in this
area go awry; this patch is intended to solve that problem by keeping
the XID around (but largely ignoring the value to which it is set).
Third-party code that checks for HEAP_XMIN_INVALID on tuples where
HEAP_XMIN_COMMITTED might be set will be broken by this change. To fix,
use the new accessor macros in htup_details.h rather than consulting the
bits directly. HeapTupleHeaderGetXmin has been modified to return
FrozenTransactionId when the infomask bits indicate that the tuple is
frozen; use HeapTupleHeaderGetRawXmin when you already know that the
tuple isn't marked commited or frozen, or want the raw value anyway.
We currently do this in routines that display the xmin for user consumption,
in tqual.c where it's known to be safe and important for the avoidance of
extra cycles, and in the function-caching code for various procedural
languages, which shouldn't invalidate the cache just because the tuple
gets frozen.
Robert Haas and Andres Freund
Updating or locking a row that was already locked by the same
transaction under the same Xid caused a MultiXact to be created; but
this is unnecessary, because there's no usefulness in being able to
differentiate two locks by the same transaction. In particular, if a
transaction executed SELECT FOR UPDATE followed by an UPDATE that didn't
modify columns of the key, we would dutifully represent the resulting
combination as a multixact -- even though a single key-update is
sufficient.
Optimize the case so that only the strongest of both locks/updates is
represented in Xmax. This can save some Xmax's from becoming
MultiXacts, which can be a significant optimization.
This missed optimization opportunity was spotted by Andres Freund while
investigating a bug reported by Oliver Seemann in message
CANCipfpfzoYnOz5jj=UZ70_R=CwDHv36dqWSpwsi27vpm1z5sA@mail.gmail.com
and also directly as a performance regression reported by Dong Ye in
message
d54b8387.000012d8.00000010@YED-DEVD1.vmware.com
Reportedly, this patch fixes the performance regression.
Since the missing optimization was reported as a significant performance
regression from 9.2, backpatch to 9.3.
Andres Freund, tweaked by Álvaro Herrera
If a tuple was locked by transaction A, and transaction B updated it,
the new version of the tuple created by B would be locked by A, yet
visible only to B; due to an oversight in HeapTupleSatisfiesUpdate, the
lock held by A wouldn't get checked if transaction B later deleted (or
key-updated) the new version of the tuple. This might cause referential
integrity checks to give false positives (that is, allow deletes that
should have been rejected).
This is an easy oversight to have made, because prior to improved tuple
locks in commit 0ac5ad5134 it wasn't possible to have tuples created by
our own transaction that were also locked by remote transactions, and so
locks weren't even considered in that code path.
It is recommended that foreign keys be rechecked manually in bulk after
installing this update, in case some referenced rows are missing with
some referencing row remaining.
Per bug reported by Daniel Wood in
CAPweHKe5QQ1747X2c0tA=5zf4YnS2xcvGf13Opd-1Mq24rF1cQ@mail.gmail.com
Tuple freezing was broken in connection to MultiXactIds; commit
8e53ae025d tried to fix it, but didn't go far enough. As noted by
Noah Misch, freezing a tuple whose Xmax is a multi containing an aborted
update might cause locks in the multi to go ignored by later
transactions. This is because the code depended on a multixact above
their cutoff point not having any lock-only member older than the cutoff
point for Xids, which is easily defeated in READ COMMITTED transactions.
The fix for this involves creating a new MultiXactId when necessary.
But this cannot be done during WAL replay, and moreover multixact
examination requires using CLOG access routines which are not supposed
to be used during WAL replay either; so tuple freezing cannot be done
with the old freeze WAL record. Therefore, separate the freezing
computation from its execution, and change the WAL record to carry all
necessary information. At WAL replay time, it's easy to re-execute
freezing because we don't need to re-compute the new infomask/Xmax
values but just take them from the WAL record.
While at it, restructure the coding to ensure all page changes occur in
a single critical section without much room for failures. The previous
coding wasn't using a critical section, without any explanation as to
why this was acceptable.
In replication scenarios using the 9.3 branch, standby servers must be
upgraded before their master, so that they are prepared to deal with the
new WAL record once the master is upgraded; failure to do so will cause
WAL replay to die with a PANIC message. Later upgrade of the standby
will allow the process to continue where it left off, so there's no
disruption of the data in the standby in any case. Standbys know how to
deal with the old WAL record, so it's okay to keep the master running
the old code for a while.
In master, the old freeze WAL record is gone, for cleanliness' sake;
there's no compatibility concern there.
Backpatch to 9.3, where the original bug was introduced and where the
previous fix was backpatched.
Álvaro Herrera and Andres Freund
The original performs too poorly; in some scenarios it shows way too
high while profiling. Try to make it a bit smarter to avoid excessive
cosst. In particular, make it have a maximum size, and have entries be
sorted in LRU order; once the max size is reached, evict the oldest
entry to avoid it from growing too large.
Per complaint from Andres Freund in connection with new tuple freezing
code.
WAL records of hint bit updates is useful to tools that want to examine
which pages have been modified. In particular, this is required to make
the pg_rewind tool safe (without checksums).
This can also be used to test how much extra WAL-logging would occur if
you enabled checksums, without actually enabling them (which you can't
currently do without re-initdb'ing).
Sawada Masahiko, docs by Samrat Revagade. Reviewed by Dilip Kumar, with
further changes by me.
Set min_recovery_apply_delay to force a delay in recovery apply for commit and
restore point WAL records. Other records are replayed immediately. Delay is
measured between WAL record time and local standby time.
Robert Haas, Fabrízio de Royes Mello and Simon Riggs
Detailed review by Mitsumasa Kondo
There's no real point in not doing this. It doesn't cost anything
in performance or space. So let's go wild.
Andres Freund, with substantial editing as to style by me.
When this reloption is set and wal_level=logical is configured,
we'll record the CIDs stamped by inserts, updates, and deletes to
the table just as we would for an actual catalog table. This will
allow logical decoding to use historical MVCC snapshots to access
such tables just as they access ordinary catalog tables.
Replication solutions built around the logical decoding machinery
will likely need to set this operation for their configuration
tables; it might also be needed by extensions which perform table
access in their output functions.
Andres Freund, reviewed by myself and others.
When wal_level=logical, we'll log columns from the old tuple as
configured by the REPLICA IDENTITY facility added in commit
07cacba983. This makes it possible
a properly-configured logical replication solution to correctly
follow table updates even if they change the chosen key columns,
or, with REPLICA IDENTITY FULL, even if the table has no key at
all. Note that updates which do not modify the replica identity
column won't log anything extra, making the choice of a good key
(i.e. one that will rarely be changed) important to performance
when wal_level=logical is configured.
Each insert, update, or delete to a catalog table will also log
the CMIN and/or CMAX values of stamped by the current transaction.
This is necessary because logical decoding will require access to
historical snapshots of the catalog in order to decode some data
types, and the CMIN/CMAX values that we may need in order to judge
row visibility may have been overwritten by the time we need them.
Andres Freund, reviewed in various versions by myself, Heikki
Linnakangas, KONDO Mitsumasa, and many others.
In 247c76a989, I added some code to do fine-grained checking of
MultiXact status of locking/updating transactions when traversing an
update chain. There was a thinko in that patch which would have the
traversing abort, that is return HeapTupleUpdated, when the other
transaction is a committed lock-only. In this case we should ignore it
and return success instead. Of course, in the case where there is a
committed update, HeapTupleUpdated is the correct return value.
A user-visible symptom of this bug is that in REPEATABLE READ and
SERIALIZABLE transaction isolation modes spurious serializability errors
can occur:
ERROR: could not serialize access due to concurrent update
In order for this to happen, there needs to be a tuple that's key-share-
locked and also updated, and the update must abort; a subsequent
transaction trying to acquire a new lock on that tuple would abort with
the above error. The reason is that the initial FOR KEY SHARE is seen
as committed by the new locking transaction, which triggers this bug.
(If the UPDATE commits, then the serialization error is correctly
reported.)
When running a query in READ COMMITTED mode, what happens is that the
locking is aborted by the HeapTupleUpdated return value, then
EvalPlanQual fetches the newest version of the tuple, which is then the
only version that gets locked. (The second time the tuple is checked
there is no misbehavior on the committed lock-only, because it's not
checked by the code that traverses update chains; so no bug.) Only the
newest version of the tuple is locked, not older ones, but this is
harmless.
The isolation test added by this commit illustrates the desired
behavior, including the proper serialization errors that get thrown.
Backpatch to 9.3.
Insertion to a non-leaf GIN page didn't make a full-page image of the page,
which is wrong. The code used to do it correctly, but was changed (commit
853d1c3103) because the redo-routine didn't
track incomplete splits correctly when the page was restored from a full
page image. Of course, that was not right way to fix it, the redo routine
should've been fixed instead. The redo-routine was surreptitiously fixed
in 2010 (commit 4016bdef8a), so all we need
to do now is revert the code that creates the record to its original form.
This doesn't change the format of the WAL record.
Backpatch to all supported versions.
When an external recovery command such as restore_command or
archive_cleanup_command fails, report the exit code properly,
distinguishing signals and normal exists, using the existing
wait_result_to_str() facility, instead of just reporting the return
value from system().
Reviewed-by: Peter Geoghegan <pg@heroku.com>
Both heap_freeze_tuple() and heap_tuple_needs_freeze() neglected to look
into a multixact to check the members against cutoff_xid. This means
that a very old Xid could survive hidden within a multi, possibly
outliving its CLOG storage. In the distant future, this would cause
clog lookup failures:
ERROR: could not access status of transaction 3883960912
DETAIL: Could not open file "pg_clog/0E78": No such file or directory.
This mostly was problematic when the updating transaction aborted, since
in that case the row wouldn't get pruned away earlier in vacuum and the
multixact could possibly survive for a long time. In many cases, data
that is inaccessible for this reason way can be brought back
heuristically.
As a second bug, heap_freeze_tuple() didn't properly handle multixacts
that need to be frozen according to cutoff_multi, but whose updater xid
is still alive. Instead of preserving the update Xid, it just set Xmax
invalid, which leads to both old and new tuple versions becoming
visible. This is pretty rare in practice, but a real threat
nonetheless. Existing corrupted rows, unfortunately, cannot be repaired
in an automated fashion.
Existing physical replicas might have already incorrectly frozen tuples
because of different behavior than in master, which might only become
apparent in the future once pg_multixact/ is truncated; it is
recommended that all clones be rebuilt after upgrading.
Following code analysis caused by bug report by J Smith in message
CADFUPgc5bmtv-yg9znxV-vcfkb+JPRqs7m2OesQXaM_4Z1JpdQ@mail.gmail.com
and privately by F-Secure.
Backpatch to 9.3, where freezing of MultiXactIds was introduced.
Analysis and patch by Andres Freund, with some tweaks by Álvaro.
It is dangerous to do so, because some code expects to be able to see what's
the true Xmax even if it is aborted (particularly while traversing HOT
chains). So don't do it, and instead rely on the callers to verify for
abortedness, if necessary.
Several race conditions and bugs fixed in the process. One isolation test
changes the expected output due to these.
This also reverts commit c235a6a589, which is no longer necessary.
Backpatch to 9.3, where this function was introduced.
Andres Freund
Commit 9dc842f08 of 8.2 era prevented MultiXact truncation during crash
recovery, because there was no guarantee that enough state had been
setup, and because it wasn't deemed to be a good idea to remove data
during crash recovery anyway. Since then, due to Hot-Standby, streaming
replication and PITR, the amount of time a cluster can spend doing crash
recovery has increased significantly, to the point that a cluster may
even never come out of it. This has made not truncating the content of
pg_multixact/ not defensible anymore.
To fix, take care to setup enough state for multixact truncation before
crash recovery starts (easy since checkpoints contain the required
information), and move the current end-of-recovery actions to a new
TrimMultiXact() function, analogous to TrimCLOG().
At some later point, this should probably done similarly to the way
clog.c is doing it, which is to just WAL log truncations, but we can't
do that for the back branches.
Back-patch to 9.0. 8.4 also has the problem, but since there's no hot
standby there, it's much less pressing. In 9.2 and earlier, this patch
is simpler than in newer branches, because multixact access during
recovery isn't required. Add appropriate checks to make sure that's not
happening.
Andres Freund
While autovacuum dutifully launched anti-multixact-wraparound vacuums
when the multixact "age" was reached, the vacuum code was not aware that
it needed to make them be full table vacuums. As the resulting
partial-table vacuums aren't capable of actually increasing relminmxid,
autovacuum continued to launch anti-wraparound vacuums that didn't have
the intended effect, until age of relfrozenxid caused the vacuum to
finally be a full table one via vacuum_freeze_table_age.
To fix, introduce logic for multixacts similar to that for plain
TransactionIds, using the same GUCs.
Backpatch to 9.3, where permanent MultiXactIds were introduced.
Andres Freund, some cleanup by Álvaro
Parts of the code used autovacuum_freeze_max_age to determine whether
anti-multixact-wraparound vacuums are necessary, while others used a
hardcoded 200000000 value. This leads to problems when
autovacuum_freeze_max_age is set to a non-default value. Use the latter
everywhere.
Backpatch to 9.3, where vacuuming of multixacts was introduced.
Andres Freund
Prevent handle_sig_alarm from losing control partway through due to a query
cancel (either an asynchronous SIGINT, or a cancel triggered by one of the
timeout handler functions). That would at least result in failure to
schedule any required future interrupt, and might result in actual
corruption of timeout.c's data structures, if the interrupt happened while
we were updating those.
We could still lose control if an asynchronous SIGINT arrives just as the
function is entered. This wouldn't break any data structures, but it would
have the same effect as if the SIGALRM interrupt had been silently lost:
we'd not fire any currently-due handlers, nor schedule any new interrupt.
To forestall that scenario, forcibly reschedule any pending timer interrupt
during AbortTransaction and AbortSubTransaction. We can avoid any extra
kernel call in most cases by not doing that until we've allowed
LockErrorCleanup to kill the DEADLOCK_TIMEOUT and LOCK_TIMEOUT events.
Another hazard is that some platforms (at least Linux and *BSD) block a
signal before calling its handler and then unblock it on return. When we
longjmp out of the handler, the unblock doesn't happen, and the signal is
left blocked indefinitely. Again, we can fix that by forcibly unblocking
signals during AbortTransaction and AbortSubTransaction.
These latter two problems do not manifest when the longjmp reaches
postgres.c, because the error recovery code there kills all pending timeout
events anyway, and it uses sigsetjmp(..., 1) so that the appropriate signal
mask is restored. So errors thrown outside any transaction should be OK
already, and cleaning up in AbortTransaction and AbortSubTransaction should
be enough to fix these issues. (We're assuming that any code that catches
a query cancel error and doesn't re-throw it will do at least a
subtransaction abort to clean up; but that was pretty much required already
by other subsystems.)
Lastly, ProcSleep should not clear the LOCK_TIMEOUT indicator flag when
disabling that event: if a lock timeout interrupt happened after the lock
was granted, the ensuing query cancel is still going to happen at the next
CHECK_FOR_INTERRUPTS, and we want to report it as a lock timeout not a user
cancel.
Per reports from Dan Wood.
Back-patch to 9.3 where the new timeout handling infrastructure was
introduced. We may at some point decide to back-patch the signal
unblocking changes further, but I'll desist from that until we hear
actual field complaints about it.
Although user-defined relations can't be directly created in
pg_catalog, it's possible for them to end up there, because you can
create them in some other schema and then use ALTER TABLE .. SET SCHEMA
to move them there. Previously, such relations couldn't afterwards
be manipulated, because IsSystemRelation()/IsSystemClass() rejected
all attempts to modify objects in the pg_catalog schema, regardless
of their origin. With this patch, they now reject only those
objects in pg_catalog which were created at initdb-time, allowing
most operations on user-created tables in pg_catalog to proceed
normally.
This patch also adds new functions IsCatalogRelation() and
IsCatalogClass(), which is similar to IsSystemRelation() and
IsSystemClass() but with a slightly narrower definition: only TOAST
tables of system catalogs are included, rather than *all* TOAST tables.
This is currently used only for making decisions about when
invalidation messages need to be sent, but upcoming logical decoding
patches will find other uses for this information.
Andres Freund, with some modifications by me.
In the GIN incomplete-splits patch, I used BlockIdDatas to store the block
number of left and right children, when inserting a downlink after a split
to an internal page posting list page. But gin_desc thought they were stored
as BlockNumbers.
Instead of simply checking the KEYS_UPDATED bit, we need to check
whether each lock held on the future version of the tuple conflicts with
the lock we're trying to acquire.
Per bug report #8434 by Tomonari Katsumata
Not doing so causes us to traverse an update chain that has been broken
by concurrent page pruning. All other code that traverses update chains
uses this check as one of the cases in which to stop iterating, so
replicate it here too. Failure to do so leads to erroneous CLOG,
subtrans or multixact lookups.
Per discussion following the bug report by J Smith in
CADFUPgc5bmtv-yg9znxV-vcfkb+JPRqs7m2OesQXaM_4Z1JpdQ@mail.gmail.com
as diagnosed by Andres Freund.
If a transaction updates/deletes a tuple just before aborting, and a
concurrent transaction tries to prune the page concurrently, the pruner
may see HeapTupleSatisfiesVacuum return HEAPTUPLE_DELETE_IN_PROGRESS,
but a later call to HeapTupleGetUpdateXid() return InvalidXid. This
would cause an assertion failure in development builds, but would be
otherwise Mostly Harmless.
Fix by checking whether the updater Xid is valid before trying to apply
it as page prune point.
Reported by Andres in 20131124000203.GA4403@alap2.anarazel.de
The reason for the fetch failure is that the tuple was removed because
it was dead; so the failure is innocuous and can be ignored. Moreover,
there's no need for further work and we can return success to the caller
immediately. EvalPlanQualFetch is doing something very similar to this
already.
Report and test case from Andres Freund in
20131124000203.GA4403@alap2.anarazel.de
Replace it with an approach similar to what GiST uses: when a page is split,
the left sibling is marked with a flag indicating that the parent hasn't been
updated yet. When the parent is updated, the flag is cleared. If an insertion
steps on a page with the flag set, it will finish split before proceeding
with the insertion.
The post-recovery cleanup mechanism was never totally reliable, as insertion
to the parent could fail e.g because of running out of memory or disk space,
leaving the tree in an inconsistent state.
This also divides the responsibility of WAL-logging more clearly between
the generic ginbtree.c code, and the parts specific to entry and posting
trees. There is now a common WAL record format for insertions and deletions,
which is written by ginbtree.c, followed by tree-specific payload, which is
returned by the placetopage- and split- callbacks.
Separate the insertion payload from the more static portions of GinBtree.
GinBtree now only contains information related to searching the tree, and
the information of what to insert is passed separately.
Add root block number to GinBtree, instead of passing it around all the
functions as argument.
Split off ginFinishSplit() from ginInsertValue(). ginFinishSplit is
responsible for finding the parent and inserting the downlink to it.
Change SET LOCAL/CONSTRAINTS/TRANSACTION behavior outside of a
transaction block from error (post-9.3) to warning. (Was nothing in <=
9.3.) Also change ABORT outside of a transaction block from notice to
warning.
Andres Freund
Heikki Linnakangas
Peter Eisentraut
Bruce Momjian
Fujii Masao
Alvaro Herrera
Noah Misch
Tom Lane
Robert Haas
Simon Riggs
Magnus Hagander