Code like
open(P, "cl /? 2>&1 |") || die "cl command not found";
does not actually catch any errors, because the exit status of the
command before the pipe is ignored. The fix is to look at $?.
This also gave the opportunity to clean up the logic of this code a bit.
The original representation uses "opcname for amname", which is good
enough; but if we replace "for" with "using", we can apply the returned
identity directly in a DROP command, as in
DROP OPERATOR CLASS opcname USING amname
This slightly simplifies code using object identities to programatically
execute commands on these kinds of objects.
Note backwards-incompatible change:
The previous representation dates back to 9.3 when object identities
were introduced by commit f8348ea3, but we don't want to change the
behavior on released branches unnecessarily and so this is not
backpatched.
Somebody apparently threw darts at the code to decide where to insert
these. They certainly didn't proceed by adding them where other similar
SETs were handled. This at least broke pg_restore, and perhaps other
use-cases too.
cfopen() and cfopen_write() failed to pass the compression level through
to zlib, so that you always got the default compression level if you got
any at all.
In passing, also fix these and related functions so that the correct errno
is reliably returned on failure; the original coding supposes that free()
cannot change errno, which is untrue on at least some platforms.
Per bug #12779 from Christoph Berg. Back-patch to 9.1 where the faulty
code was introduced.
Michael Paquier
The previous coding in EXPLAIN always labeled a ModifyTable node with the
name of the target table affected by its first child plan. When originally
written, this was necessarily the parent table of the inheritance tree,
so everything was unconfusing. But when we added NO INHERIT constraints,
it became possible for the parent table to be deleted from the plan by
constraint exclusion while still leaving child tables present. This led to
the ModifyTable plan node being labeled with the first surviving child,
which was deemed confusing. Fix it by retaining the parent table's RT
index in a new field in ModifyTable.
Etsuro Fujita, reviewed by Ashutosh Bapat and myself
After removal, the next_sibling pointer of a node was sometimes incorrectly
left to point to another node in the heap, which meant that a node was
sometimes linked twice into the heap. Surprisingly that didn't cause any
crashes in my testing, but it was clearly wrong and could easily segfault
in other scenarios.
Also always keep the prev_or_parent pointer as NULL on the root node. That
was not a correctness issue AFAICS, but let's be tidy.
Add a debugging function, to dump the contents of a pairing heap as a
string. It's #ifdef'd out, as it's not used for anything in any normal
code, but it was highly useful in debugging this. Let's keep it handy for
further reference.
The part of the comparison function that was supposed to keep heap tuples
ahead of index items was backwards. It would not lead to incorrect results,
but it is more efficient to return heap tuples first, before scanning more
index pages, when both have the same distance.
Alexander Korotkov
In investigating yesterday's crash report from Hugo Osvaldo Barrera, I only
looked back as far as commit f3aec2c7f5 where the breakage occurred
(which is why I thought the IPv4-in-IPv6 business was undocumented). But
actually the logic dates back to commit 3c9bb8886d and was simply
broken by erroneous refactoring in the later commit. A bit of archives
excavation shows that we added the whole business in response to a report
that some 2003-era Linux kernels would report IPv4 connections as having
IPv4-in-IPv6 addresses. The fact that we've had no complaints since 9.0
seems to be sufficient confirmation that no modern kernels do that, so
let's just rip it all out rather than trying to fix it.
Do this in the back branches too, thus essentially deciding that our
effective behavior since 9.0 is correct. If there are any platforms on
which the kernel reports IPv4-in-IPv6 addresses as such, yesterday's fix
would have made for a subtle and potentially security-sensitive change in
the effective meaning of IPv4 pg_hba.conf entries, which does not seem like
a good thing to do in minor releases. So let's let the post-9.0 behavior
stand, and change the documentation to match it.
In passing, I failed to resist the temptation to wordsmith the description
of pg_hba.conf IPv4 and IPv6 address entries a bit. A lot of this text
hasn't been touched since we were IPv4-only.
Avoid losing errno if readdir() fails and closedir() works. Consistently
return 4 rather than 3 if both a lost+found directory and other files are
found, rather than returning one value or the other depending on the
order of the directory listing. Update comments to match the actual
behavior.
These oversights date to commits 6f03927fce
and 17f1523932.
Marco Nenciarini
The previous coding copied garbage into a local variable, pretty much
ensuring that the intended test of an IPv6 connection address against a
promoted IPv4 address from pg_hba.conf would never match. The lack of
field complaints likely indicates that nobody realized this was supposed
to work, which is unsurprising considering that no user-facing docs suggest
it should work.
In principle this could have led to a SIGSEGV due to reading off the end of
memory, but since the source address would have pointed to somewhere in the
function's stack frame, that's quite unlikely. What led to discovery of
the bug is Hugo Osvaldo Barrera's report of a crash after an OS upgrade,
which is probably because he is now running a system in which memcpy raises
abort() upon detecting overlapping source and destination areas. (You'd
have to additionally suppose some things about the stack frame layout to
arrive at this conclusion, but it seems plausible.)
This has been broken since the code was added, in commit f3aec2c7f5,
so back-patch to all supported branches.
This reverts the removal of the call in commit (272923a0). It turns out it
wasn't superfluous after all: without it, renegotiation fails if a client
certificate was used. The rest of the changes in that commit are still OK
and not reverted.
Per investigation of bug #12769 by Arne Scheffer, although this doesn't fix
the reported bug yet.
exec_stmt_return() and exec_stmt_return_next() have fast-path code for
handling a simple variable reference (i.e. "return var") without going
through the full expression evaluation machinery. For some reason,
pl_gram.y was under the impression that this fast path only applied for
record/row variables; but in reality code for handling regular scalar
variables has been there all along. Adjusting the logic to allow that
code to be used actually results in a net savings of code in pl_gram.y
(by eliminating some redundancy), and it buys a measurable though not
very impressive amount of speedup.
Noted while fooling with my expanded-array patch, wherein this makes a much
bigger difference because it enables returning an expanded array variable
without an extra flattening step. But AFAICS this is a win regardless,
so commit it separately.
All the other certificates were created to be valid for 10000 days, because
we don't want to have to recreate them. But I missed the root CA cert, and
the pre-created certificates included in the repository expired in January.
Fix, and re-create all the certificates.
The four functions array_ref, array_set, array_get_slice, array_set_slice
have traditionally declared their array inputs and results as being of type
"ArrayType *". This is a lie, and has been since Berkeley days, because
they actually also support "fixed-length array" types such as "name" and
"point"; not to mention that the inputs could be toasted. These values
should be declared Datum instead to avoid confusion. The current coding
already risks possible misoptimization by compilers, and it'll get worse
when "expanded" array representations become a valid alternative.
However, there's a fair amount of code using array_ref and array_set with
arrays that *are* known to be ArrayType structures, and there might be more
such places in third-party code. Rather than cluttering those call sites
with PointerGetDatum/DatumGetArrayTypeP cruft, what I did was to rename the
existing functions to array_get_element/array_set_element, fix their
signatures, then reincarnate array_ref/array_set as backwards compatibility
wrappers.
array_get_slice/array_set_slice have no such constituency in the core code,
and probably not in third-party code either, so I just changed their APIs.
In commit bf7ca15875 I introduced an
assumption that an RTE referenced by a whole-row Var must have a valid eref
field. This is false for RTEs constructed by DoCopy, and there are other
places taking similar shortcuts. Perhaps we should make all those places
go through addRangeTableEntryForRelation or its siblings instead of having
ad-hoc logic, but the most reliable fix seems to be to make the new code in
ExecEvalWholeRowVar cope if there's no eref. We can reasonably assume that
there's no need to insert column aliases if no aliases were provided.
Add a regression test case covering this, and also verifying that a sane
column name is in fact available in this situation.
Although the known case only crashes in 9.4 and HEAD, it seems prudent to
back-patch the code change to 9.2, since all the ingredients for a similar
failure exist in the variant patch applied to 9.3 and 9.2.
Per report from Jean-Pierre Pelletier.
The client socket is always in non-blocking mode, and if we actually want
blocking behaviour, we emulate it by sleeping and retrying. But we have
retry loops at different layers for reads and writes, which was confusing.
To simplify, remove all the sleeping and retrying code from the lower
levels, from be_tls_read and secure_raw_read and secure_raw_write, and put
all the logic in secure_read() and secure_write().
At least in all modern versions of OpenSSL, it is enough to call
SSL_renegotiate() once, and then forget about it. Subsequent SSL_write()
and SSL_read() calls will finish the handshake.
The SSL_set_session_id_context() call is unnecessary too. We only have
one SSL context, and the SSL session was created with that to begin with.
pg_database.datfrozenxid and pg_database.datminmxid were not preserved
for the 'postgres' and 'template1' databases. This could cause missing
clog file errors on access to user tables and indexes after upgrades in
these databases.
Backpatch through 9.0
This omission leaked one PGresult per WAL streaming cycle, which possibly
would never be enough to notice in the real world, but it's still a leak.
Per Coverity. Back-patch to 9.3 where the error was introduced.
We'd leak the ident_serv data structure if the second pg_getaddrinfo_all
(the one for the local address) failed. This is not of great consequence
because a failure return here just leads directly to backend exit(), but
if this function is going to try to clean up after itself at all, it should
not have such holes in the logic. Try to fix it in a future-proof way by
having all the failure exits go through the same cleanup path, rather than
"optimizing" some of them.
Per Coverity. Back-patch to 9.2, which is as far back as this patch
applies cleanly.
We already had one go at this issue in commit d73b7f973d, but we
failed to notice that buildACLCommands also leaked several PQExpBuffers
along with a simply malloc'd string. This time let's try to make the
fix a bit more future-proof by eliminating the separate exit path.
It's still not exactly critical because pg_dump will curl up and die on
failure; but since the amount of the potential leak is now several KB,
it seems worth back-patching as far as 9.2 where the previous fix landed.
Per Coverity, which evidently is smarter than clang's static analyzer.
Back in 2003 we had a discussion about how to decide which casts to dump.
At the time pg_dump really only considered an object's containing schema
to decide what to dump (ie, dump whatever's not in pg_catalog), and so
we chose a complicated idea involving whether the underlying types were to
be dumped (cf commit a6790ce857). But users
are allowed to create casts between built-in types, and we failed to dump
such casts. Let's get rid of that heuristic, which has accreted even more
ugliness since then, in favor of just looking at the cast's OID to decide
if it's a built-in cast or not.
In passing, also fix some really ancient code that supposed that it had to
manufacture a dependency for the cast on its cast function; that's only
true when dumping from a pre-7.3 server. This just resulted in some wasted
cycles and duplicate dependency-list entries with newer servers, but we
might as well improve it.
Per gripes from a number of people, most recently Greg Sabino Mullane.
Back-patch to all supported branches.
Back in commit 400e2c9344 I rewrote GEQO's
gimme_tree function to improve its heuristic for modifying the given tour
into a legal join order. In what can only be called a fit of hubris,
I supposed that this new heuristic would *always* find a legal join order,
and ripped out the old logic that allowed gimme_tree to sometimes fail.
The folly of this is exposed by bug #12760, in which the "greedy" clumping
behavior of merge_clump() can lead it into a dead end which could only be
recovered from by un-clumping. We have no code for that and wouldn't know
exactly what to do with it if we did. Rather than try to improve the
heuristic rules still further, let's just recognize that it *is* a
heuristic and probably must always have failure cases. So, put back the
code removed in the previous commit to allow for failure (but comment it
a bit better this time).
It's possible that this code was actually fully correct at the time and
has only been broken by the introduction of LATERAL. But having seen this
example I no longer have much faith in that proposition, so back-patch to
all supported branches.
When ecpg was rewritten to the new protocol version not all variable types
were corrected. This patch rewrites the code for these types to fix that. It
also fixes the documentation to correctly tell the status of array handling.
This speeds up WAL generation and replay. The new algorithm is
significantly faster with large inputs, like full-page images or when
inserting wide rows. It is slower with tiny inputs, i.e. less than 10 bytes
or so, but the speedup with longer inputs more than make up for that. Even
small WAL records at least have 24 byte header in the front.
The output is identical to the current byte-at-a-time computation, so this
does not affect compatibility. The new algorithm is only used for the
CRC-32C variant, not the legacy version used in tsquery or the
"traditional" CRC-32 used in hstore and ltree. Those are not as performance
critical, and are usually only applied over small inputs, so it seems
better to not carry around the extra lookup tables to speed up those rare
cases.
Abhijit Menon-Sen
Fix some issues I noticed while fooling with an extension to allow an
additional kind of toast pointer. Much of this is just comment
improvement, but there are a couple of actual bugs, which might or might
not be reachable today depending on what can happen during logical
decoding. An example is that toast_flatten_tuple() failed to cover the
possibility of an indirection pointer in its input. Back-patch to 9.4
just in case that is reachable now.
In HEAD, also correct some really minor issues with recent compression
reorganization, such as dangerously underparenthesized macros.
To get CRC functionality in a client program, you now need to link with
libpgcommon instead of libpgport. The CRC code has nothing to do with
portability, so libpgcommon is a better home. (libpgcommon didn't exist
when pg_crc.c was originally moved to src/port.)
Remove the possibility to get CRC functionality by just #including
pg_crc_tables.h. I'm not aware of any extensions that actually did that and
couldn't simply link with libpgcommon.
This also moves the pg_crc.h header file from src/include/utils to
src/include/common, which will require changes to any external programs
that currently does #include "utils/pg_crc.h". That seems acceptable, as
include/common is clearly the right home for it now, and the change needed
to any such programs is trivial.
The meta data of PGLZ symbolized by PGLZ_Header is removed, to make
the compression and decompression code independent on the backend-only
varlena facility. PGLZ_Header is being used to store some meta data
related to the data being compressed like the raw length of the uncompressed
record or some varlena-related data, making it unpluggable once PGLZ is
stored in src/common as it contains some backend-only code paths with
the management of varlena structures. The APIs of PGLZ are reworked
at the same time to do only compression and decompression of buffers
without the meta-data layer, simplifying its use for a more general usage.
On-disk format is preserved as well, so there is no incompatibility with
previous major versions of PostgreSQL for TOAST entries.
Exposing compression and decompression APIs of pglz makes possible its
use by extensions and contrib modules. Especially this commit is required
for upcoming WAL compression feature so that the WAL reader facility can
decompress the WAL data by using pglz_decompress.
Michael Paquier, reviewed by me.
We reserve space for the full amount, not one less. The affected checks
deal with localized month and day names. Today's DCH_MAX_ITEM_SIZ value
would suffice for a 60-byte day name, while the longest known is the
49-byte mn_CN.utf-8 word for "Saturday." Thus, the upshot of this
change is merely to avoid misdirecting future readers of the code; users
are not expected to see errors either way.
When beginning streaming replication, the client usually issues the
IDENTIFY_SYSTEM command, which used to return the current WAL insert
position. That's not suitable for the intended purpose of that field,
however. pg_receivexlog uses it to start replication from the reported
point, but if it hasn't been flushed to disk yet, it will fail. Change
IDENTIFY_SYSTEM to report the flush position instead.
Backpatch to 9.1 and above. 9.0 doesn't report any WAL position.
actually check the returned pointer allocated, potentially NULL which
could be the result of a malloc call.
Issue noted by Coverity, fixed by Michael Paquier <michael@otacoo.com>
It was getting tedious to track and release all the different things that
form a scan key. We were leaking at least the queryCategories array, and
possibly more, on a rescan. That was visible if a GIN index was used in a
nested loop join. This also protects from leaks in extractQuery method.
No backpatching, given the lack of complaints from the field. Maybe later,
after this has received more field testing.
If an insertion or update had to wait for another transaction to finish,
because there was another insertion with conflicting key in progress,
we would pass a just-free'd item pointer to XactLockTableWait().
All calls to XactLockTableWait() and MultiXactIdWait() had similar issues.
Some passed a pointer to a buffer in the buffer cache, after already
releasing the lock. The call in EvalPlanQualFetch had already released the
pin too. All but the call in execUtils.c would merely lead to reporting a
bogus ctid, however (or an assertion failure, if enabled).
All the callers that passed HeapTuple->t_data->t_ctid were slightly bogus
anyway: if the tuple was updated (again) in the same transaction, its ctid
field would point to the next tuple in the chain, not the tuple itself.
Backpatch to 9.4, where the 'ctid' argument to XactLockTableWait was added
(in commit f88d4cfc)
On windows _isnan() (which isnan() is redirected to in port/win32.h)
is declared in float.h, not math.h.
Per buildfarm animal currawong.
Backpatch to all supported branches.
All the other new SSL information functions had dummy versions in
be-secure.c, but I missed PQsslAttributes(). Oops. Surprisingly, the linker
did not complain about the missing function on most platforms represented in
the buildfarm, even though it is exported, except for a few Windows systems.
It's perfectly fine to have blocked interrupts when
ProcessClientWriteInterrupt() is called. In fact it's commonly the
case when emitting error reports. And we deal with that correctly.
Even if that'd not be the case, it'd be a bad location for such a
assertion. Because ProcessClientWriteInterrupt() is only called when
the socket is blocked it's hard to hit.
Per Heikki and buildfarm animals nightjar and dunlin.
The remaining caller (lwlocks) doesn't need that facility, and we plan
to remove ImmedidateInterruptOK entirely. That means that interrupts
can't be serviced race-free and portably anyway, so there's little
reason for keeping the feature.
Reviewed-By: Heikki Linnakangas
Deadlock checking was performed inside signal handlers up to
now. While it's a remarkable feat to have made this work reliably,
it's quite complex to understand why that is the case. Partially it
worked due to the assumption that semaphores are signal safe - which
is not actually documented to be the case for sysv semaphores.
The reason we had to rely on performing this work inside signal
handlers is that semaphores aren't guaranteed to be interruptable by
signals on all platforms. But now that latches provide a somewhat
similar API, which actually has the guarantee of being interruptible,
we can avoid doing so.
Signalling between ProcSleep, ProcWakeup, ProcWaitForSignal and
ProcSendSignal is now done using latches. This increases the
likelihood of spurious wakeups. As spurious wakeup already were
possible and aren't likely to be frequent enough to be an actual
problem, this seems acceptable.
This change would allow for further simplification of the deadlock
checking, now that it doesn't have to run in a signal handler. But
even if I were motivated to do so right now, it would still be better
to do that separately. Such a cleanup shouldn't have to be reviewed a
the same time as the more fundamental changes in this commit.
There is one possible usability regression due to this commit. Namely
it is more likely than before that log_lock_waits messages are output
more than once.
Reviewed-By: Heikki Linnakangas
We used to handle authentication_timeout by setting
ImmediateInterruptOK to true during large parts of the authentication
phase of a new connection. While that happens to work acceptably in
practice, it's not particularly nice and has ugly corner cases.
Previous commits converted the FE/BE communication to use latches and
implemented support for interrupt handling during both
send/recv. Building on top of that work we can get rid of
ImmediateInterruptOK during authentication, by immediately treating
timeouts during authentication as a reason to die. As die interrupts
are handled immediately during client communication that provides a
sensibly quick reaction time to authentication timeout.
Additionally add a few CHECK_FOR_INTERRUPTS() to some more complex
authentication methods. More could be added, but this already should
provides a reasonable coverage.
While it this overall increases the maximum time till a timeout is
reacted to, it greatly reduces complexity and increases
reliability. That seems like a overall win. If the increase proves to
be noticeable we can deal with those cases by moving to nonblocking
network code and add interrupt checking there.
Reviewed-By: Heikki Linnakangas
This field has been unreferenced since 1998, and does not appear in lseg
values stored on disk (since sizeof(lseg) is only 32 bytes according to
pg_type). There was apparently some idea of maintaining it just in values
appearing in memory, but the bookkeeping required to make that work would
surely far outweigh the cost of recalculating the line's slope when needed.
Remove it to (a) simplify matters and (b) suppress some uninitialized-field
whining from Coverity.
Up to now it was impossible to terminate a backend that was trying to
send/recv data to/from the client when the socket's buffer was already
full/empty. While the send/recv calls itself might have gotten
interrupted by signals on some platforms, we just immediately retried.
That could lead to situations where a backend couldn't be terminated ,
after a client died without the connection being closed, because it
was blocked in send/recv.
The problem was far more likely to be hit when sending data than when
reading. That's because while reading a command from the client, and
during authentication, we processed interrupts immediately . That
primarily left COPY FROM STDIN as being problematic for recv.
Change things so that that we process 'die' events immediately when
the appropriate signal arrives. We can't sensibly react to query
cancels at that point, because we might loose sync with the client as
we could be in the middle of writing a message.
We don't interrupt writes if the write buffer isn't full, as indicated
by write() returning EWOULDBLOCK, as that would lead to fewer error
messages reaching clients.
Per discussion with Kyotaro HORIGUCHI and Heikki Linnakangas
Discussion: 20140927191243.GD5423@alap3.anarazel.de
Up to now large swathes of backend code ran inside signal handlers
while reading commands from the client, to allow for speedy reaction to
asynchronous events. Most prominently shared invalidation and NOTIFY
handling. That means that complex code like the starting/stopping of
transactions is run in signal handlers... The required code was
fragile and verbose, and is likely to contain bugs.
That approach also severely limited what could be done while
communicating with the client. As the read might be from within
openssl it wasn't safely possible to trigger an error, e.g. to cancel
a backend in idle-in-transaction state. We did that in some cases,
namely fatal errors, nonetheless.
Now that FE/BE communication in the backend employs non-blocking
sockets and latches to block, we can quite simply interrupt reads from
signal handlers by setting the latch. That allows us to signal an
interrupted read, which is supposed to be retried after returning from
within the ssl library.
As signal handlers now only need to set the latch to guarantee timely
interrupt processing, remove a fair amount of complicated & fragile
code from async.c and sinval.c.
We could now actually start to process some kinds of interrupts, like
sinval ones, more often that before, but that seems better done
separately.
This work will hopefully allow to handle cases like being blocked by
sending data, interrupting idle transactions and similar to be
implemented without too much effort. In addition to allowing getting
rid of ImmediateInterruptOK, that is.
Author: Andres Freund
Reviewed-By: Heikki Linnakangas
This allows to introduce more elaborate handling of interrupts while
reading from a socket. Currently some interrupt handlers have to do
significant work from inside signal handlers, and it's very hard to
correctly write code to do so. Generic signal handler limitations,
combined with the fact that we can't safely jump out of a signal
handler while reading from the client have prohibited implementation
of features like timeouts for idle-in-transaction.
Additionally we use the latch code to wait in a couple places where we
previously only had waiting code on windows as other platforms just
busy looped.
This can increase the number of systemcalls happening during FE/BE
communication. Benchmarks so far indicate that the impact isn't very
high, and there's room for optimization in the latch code. The chance
of cleaning up the usage of latches gives us, seem to outweigh the
risk of small performance regressions.
This commit theoretically can't used without the next patch in the
series, as WaitLatchOrSocket is not defined to be fully signal
safe. As we already do that in some cases though, it seems better to
keep the commits separate, so they're easier to understand.
Author: Andres Freund
Reviewed-By: Heikki Linnakangas
LINE doesn't have an "m" field (anymore anyway). Also fix unportable
assumption that %x can print the result of pointer subtraction.
In passing, improve single_decode() in minor ways:
* Remove unnecessary leading-whitespace skip (strtod does that already).
* Make GEODEBUG message more intelligible.
* Remove entirely-useless test to see if strtod returned a silly pointer.
* Don't bother computing trailing-whitespace skip unless caller wants
an ending pointer.
This has been broken since 261c7d4b65.
Although it's only debug code, might as well fix the 9.4 branch too.
This makes it possible to query for things like the SSL version and cipher
used, without depending on OpenSSL functions or macros. That is a good
thing if we ever get another SSL implementation.
PQgetssl() still works, but it should be considered as deprecated as it
only works with OpenSSL. In particular, PQgetSslInUse() should be used to
check if a connection uses SSL, because as soon as we have another
implementation, PQgetssl() will return NULL even if SSL is in use.
The logic to compact away removed tuples from page was duplicated with
small differences in PageRepairFragmentation, PageIndexMultiDelete, and
PageIndexDeleteNoCompact. Put it into a common function.
Reviewed by Peter Geoghegan.
Sometimes it's useful for a background worker to be able to initialize
its database connection by OID rather than by name, so provide a way
to do that.
If any error occurred while we were in the middle of reading a protocol
message from the client, we could lose sync, and incorrectly try to
interpret a part of another message as a new protocol message. That will
usually lead to an "invalid frontend message" error that terminates the
connection. However, this is a security issue because an attacker might
be able to deliberately cause an error, inject a Query message in what's
supposed to be just user data, and have the server execute it.
We were quite careful to not have CHECK_FOR_INTERRUPTS() calls or other
operations that could ereport(ERROR) in the middle of processing a message,
but a query cancel interrupt or statement timeout could nevertheless cause
it to happen. Also, the V2 fastpath and COPY handling were not so careful.
It's very difficult to recover in the V2 COPY protocol, so we will just
terminate the connection on error. In practice, that's what happened
previously anyway, as we lost protocol sync.
To fix, add a new variable in pqcomm.c, PqCommReadingMsg, that is set
whenever we're in the middle of reading a message. When it's set, we cannot
safely ERROR out and continue running, because we might've read only part
of a message. PqCommReadingMsg acts somewhat similarly to critical sections
in that if an error occurs while it's set, the error handler will force the
connection to be terminated, as if the error was FATAL. It's not
implemented by promoting ERROR to FATAL in elog.c, like ERROR is promoted
to PANIC in critical sections, because we want to be able to use
PG_TRY/CATCH to recover and regain protocol sync. pq_getmessage() takes
advantage of that to prevent an OOM error from terminating the connection.
To prevent unnecessary connection terminations, add a holdoff mechanism
similar to HOLD/RESUME_INTERRUPTS() that can be used hold off query cancel
interrupts, but still allow die interrupts. The rules on which interrupts
are processed when are now a bit more complicated, so refactor
ProcessInterrupts() and the calls to it in signal handlers so that the
signal handlers always call it if ImmediateInterruptOK is set, and
ProcessInterrupts() can decide to not do anything if the other conditions
are not met.
Reported by Emil Lenngren. Patch reviewed by Noah Misch and Andres Freund.
Backpatch to all supported versions.
Security: CVE-2015-0244
Prevent port/snprintf() from overflowing its local fixed-size
buffer and pad to the desired number of digits with zeros, even
if the precision is beyond the ability of the native sprintf().
port/snprintf() is only used on systems that lack a native
snprintf().
Reported by Bruce Momjian. Patch by Tom Lane. Backpatch to all
supported versions.
Security: CVE-2015-0242
Previously very long localized month and weekday strings could
overflow the allocated buffers, causing a server crash.
Reported and patch reviewed by Noah Misch. Backpatch to all
supported versions.
Security: CVE-2015-0241
Previously very long field masks for floats could access memory
beyond the existing buffer allocated to hold the result.
Reported by Andres Freund and Peter Geoghegan. Backpatch to all
supported versions.
Security: CVE-2015-0241
"ECHO all" is ignored for interactive input, and has been for a very long
time, though possibly not for as long as the documentation has claimed the
opposite. Fix that, and also note that empty lines aren't echoed, which
while dubious is another longstanding behavior (it's embedded in our
regression test files for one thing). Per bug #12721 from Hans Ginzel.
In HEAD, also improve the code comments in this area, and suppress an
unnecessary fflush(stdout) when we're not echoing. That would likely
be safe to back-patch, but I'll not risk it mere hours before a release
wrap.
We've been trying to support \u0000 in JSON values since commit
78ed8e03c6, and have introduced increasingly worse hacks to try to
make it work, such as commit 0ad1a81632. However, it fundamentally
can't work in the way envisioned, because the stored representation looks
the same as for \\u0000 which is not the same thing at all. It's also
entirely bogus to output \u0000 when de-escaped output is called for.
The right way to do this would be to store an actual 0x00 byte, and then
throw error only if asked to produce de-escaped textual output. However,
getting to that point seems likely to take considerable work and may well
never be practical in the 9.4.x series.
To preserve our options for better behavior while getting rid of the nasty
side-effects of 0ad1a81632, revert that commit in toto and instead
throw error if \u0000 is used in a context where it needs to be de-escaped.
(These are the same contexts where non-ASCII Unicode escapes throw error
if the database encoding isn't UTF8, so this behavior is by no means
without precedent.)
In passing, make both the \u0000 case and the non-ASCII Unicode case report
ERRCODE_UNTRANSLATABLE_CHARACTER / "unsupported Unicode escape sequence"
rather than claiming there's something wrong with the input syntax.
Back-patch to 9.4, where we have to do something because 0ad1a81632
broke things for many cases having nothing to do with \u0000. 9.3 also has
bogus behavior, but only for that specific escape value, so given the lack
of field complaints it seems better to leave 9.3 alone.
Using the new interface MemoryContextAllocExtended, callers can
specify MCXT_ALLOC_NO_OOM if they are prepared to handle a NULL
return value.
Michael Paquier, reviewed and somewhat revised by me.
calc_rangesel() failed outright when comparing range variables to empty
constant ranges with < or >=, as a result of missing cases in a switch.
It also produced a bogus estimate for > comparison to an empty range.
On top of that, the >= and > cases were mislabeled throughout. For
nonempty constant ranges, they managed to produce the right answers
anyway as a result of counterbalancing typos.
Also, default_range_selectivity() omitted cases for elem <@ range,
range &< range, and range &> range, so that rather dubious defaults
were applied for these operators.
In passing, rearrange the code in rangesel() so that the elem <@ range
case is handled in a less opaque fashion.
Report and patch by Emre Hasegeli, some additional work by me
The requiredEntries / additionalEntries arrays were not freed in
freeScanKeys() like other per-key stuff.
It's not obvious, but startScanKey() was only ever called after the keys
have been initialized with ginNewScanKey(). That's why it doesn't need to
worry about freeing existing arrays. The ginIsNewKey() test in gingetbitmap
was never true, because ginrescan free's the existing keys, and it's not OK
to call gingetbitmap twice in a row without calling ginrescan in between.
To make that clear, remove the unnecessary ginIsNewKey(). And just to be
extra sure that nothing funny happens if there is an existing key after all,
call freeScanKeys() to free it if it exists. This makes the code more
straightforward.
(I'm seeing other similar leaks in testing a query that rescans an GIN index
scan, but that's a different issue. This just fixes the obvious leak with
those two arrays.)
Backpatch to 9.4, where GIN fast scan was added.
Since 9.3, when the --jobs option was introduced, using it together
with the --serializable-deferrable option generated multiple
errors. We can get correct behavior by allowing the connection
which acquires the snapshot to use SERIALIZABLE, READ ONLY,
DEFERRABLE and pass that to the workers running the other
connections using REPEATABLE READ, READ ONLY. This is a bit of a
kluge since the SERIALIZABLE behavior is achieved by running some
of the participating connections at a different isolation level,
but it is a simple and safe change, suitable for back-patching.
This will be followed by a proposal for a more invasive fix with
some slight behavioral changes on just the master branch, based on
suggestions from Andres Freund, but the kluge will be applied to
master until something is agreed along those lines.
Back-patched to 9.3, where the --jobs option was added.
Based on report from Alexander Korotkov
In 804b6b6db4 we modified
BuildIndexValueDescription to pay attention to which columns are visible
to the user, but unfortunatley that commit neglected to consider indexes
which are built on expressions.
Handle error-reporting of violations of constraint indexes based on
expressions by not returning any detail when the user does not have
table-level SELECT rights.
Backpatch to 9.0, as the prior commit was.
Pointed out by Tom.
GetLockConflicts() has for a long time not properly terminated the
returned array. During normal processing the returned array is zero
initialized which, while not pretty, is sufficient to be recognized as
a invalid virtual transaction id. But the HotStandby case is more than
aesthetically broken: The allocated (and reused) array is neither
zeroed upon allocation, nor reinitialized, nor terminated.
Not having a terminating element means that the end of the array will
not be recognized and that recovery conflict handling will thus read
ahead into adjacent memory. Only terminating when hitting memory
content that looks like a invalid virtual transaction id. Luckily
this seems so far not have caused significant problems, besides making
recovery conflict more expensive.
Discussion: 20150127142713.GD29457@awork2.anarazel.de
Backpatch into all supported branches.
Benchmarks has shown that aligning the buffer descriptor array to
cache lines is important for scalability; especially on bigger,
multi-socket, machines.
Currently the array sometimes already happens to be aligned by
happenstance, depending how large previous shared memory allocations
were. That can lead to wildly varying performance results after minor
configuration changes.
In addition to aligning the start of descriptor array, also force the
size of individual descriptors to be of a common cache line size (64
bytes). That happens to already be the case on 64bit platforms, but
this way we can change the struct BufferDesc more easily.
As the alignment primarily matters in highly concurrent workloads
which probably all are 64bit these days, and the space wastage of
element alignment would be a bit more noticeable on 32bit systems, we
don't force the stride to be cacheline sized on 32bit platforms for
now. If somebody does actual performance testing, we can reevaluate
that decision by changing the definition of BUFFERDESC_PADDED_SIZE.
Discussion: 20140202151319.GD32123@awork2.anarazel.de
Per discussion with Bruce Momjan, Tom Lane, Robert Haas, and Peter
Geoghegan.
When gin_fuzzy_search_limit was used, we could jump out of startScan()
without calling startScanKey(). That was harmless in 9.3 and below, because
startScanKey()() didn't do anything interesting, but in 9.4 it initializes
information needed for skipping entries (aka GIN fast scans), and you
readily get a segfault if it's not done. Nevertheless, it was clearly wrong
all along, so backpatch all the way to 9.1 where the early return was
introduced.
(AFAICS startScanKey() did nothing useful in 9.3 and below, because the
fields it initialized were already initialized in ginFillScanKey(), but I
don't dare to change that in a minor release. ginFillScanKey() is always
called in gingetbitmap() even though there's a check there to see if the
scan keys have already been initialized, because they never are; ginrescan()
free's them.)
In the passing, remove unnecessary if-check from the second inner loop in
startScan(). We already check in the first loop that the condition is true
for all entries.
Reported by Olaf Gawenda, bug #12694, Backpatch to 9.1 and above, although
AFAICS it causes a live bug only in 9.4.
This potentially allows us to add mcxt.c interfaces that do something
other than throw an error when memory cannot be allocated. We'll
handle adding those interfaces in a separate commit.
Michael Paquier, with minor changes by me
The row level security patches didn't add the 'usebypassrls' columns to
the pg_user and pg_shadow views on the belief that they were deprecated,
but we havn't actually said they are and therefore we should include it.
This patch corrects that, adds missing documentation for rolbypassrls
into the system catalog page for pg_authid, along with the entries for
pg_user and pg_shadow, and cleans up a few other uses of 'row-level'
cases to be 'row level' in the docs.
Pointed out by Amit Kapila.
Catalog version bump due to system view changes.
Commit 804b6b6db4 added the build of a
range table in copy.c to initialize the EState es_range_table since it
can be needed in error paths. Unfortunately, that commit didn't
appreciate that some code paths might end up not initializing the rte
which is used to build the range table.
Fix that and clean up a couple others things along the way- build it
only once and don't explicitly set it on the !is_from path as it
doesn't make any sense there (cstate is palloc0'd, so this isn't an
issue from an initializing standpoint either).
The prior commit went back to 9.0, but this only goes back to 9.1 as
prior to that the range table build happens immediately after building
the RTE and therefore doesn't suffer from this issue.
Pointed out by Robert.
While building error messages to return to the user,
BuildIndexValueDescription, ExecBuildSlotValueDescription and
ri_ReportViolation would happily include the entire key or entire row in
the result returned to the user, even if the user didn't have access to
view all of the columns being included.
Instead, include only those columns which the user is providing or which
the user has select rights on. If the user does not have any rights
to view the table or any of the columns involved then no detail is
provided and a NULL value is returned from BuildIndexValueDescription
and ExecBuildSlotValueDescription. Note that, for key cases, the user
must have access to all of the columns for the key to be shown; a
partial key will not be returned.
Further, in master only, do not return any data for cases where row
security is enabled on the relation and row security should be applied
for the user. This required a bit of refactoring and moving of things
around related to RLS- note the addition of utils/misc/rls.c.
Back-patch all the way, as column-level privileges are now in all
supported versions.
This has been assigned CVE-2014-8161, but since the issue and the patch
have already been publicized on pgsql-hackers, there's no point in trying
to hide this commit.
gist_poly_compress() and gist_circle_compress() checked for a NULL-pointer
key argument, but that was dead code; the gist code never passes a
NULL-pointer to the "compress" method.
This commit also removes a documentation note added in commit a0a3883,
about doing NULL-pointer checks in the "compress" method. It was added
based on the fact that some implementations were doing NULL-pointer
checks, but those checks were unnecessary in the first place.
The NULL-pointer check in gbt_var_same() function was also unnecessary.
The arguments to the "same" method come from the "compress", "union", or
"picksplit" methods, but none of them return a NULL pointer.
None of this is to be confused with SQL NULL values. Those are dealt with
by the gist machinery, and are never passed to the GiST opclass methods.
Michael Paquier
Commit 145343534c arranged to store numeric
NaN values as short-header numerics, but the field access macros did not
get the memo: they thought only "SHORT" numerics have short headers.
Most of the time this makes no difference because we don't access the
weight or dscale of a NaN; but numeric_send does that. As pointed out
by Andrew Gierth, this led to fetching uninitialized bytes.
AFAICS this could not have any worse consequences than that; in particular,
an unaligned stored numeric would have been detoasted by PG_GETARG_NUMERIC,
so that there's no risk of a fetch off the end of memory. Still, the code
is wrong on its own terms, and it's not hard to foresee future changes that
might expose us to real risks. So back-patch to all affected branches.
Commit 1be4eb1b2d disabled this, but I
think the real problem here was fixed by commit
b181a91981 and commit
d060e07fa9. So let's try re-enabling
it now and see what happens.
The "callargs" variable is modified within PG_TRY and then referenced
within PG_CATCH, which is exactly the coding pattern we've now found
to be unsafe. Marking "callargs" volatile would be problematic because
it is passed by reference to some Tcl functions, so fix the problem
by not modifying it within PG_TRY. We can just postpone the free()
till we exit the PG_TRY construct, as is already done elsewhere in this
same file.
Also, fix failure to free(callargs) when exiting on too-many-arguments
error. This is only a minor memory leak, but a leak nonetheless.
In passing, remove some unnecessary "volatile" markings in the same
function. Those doubtless are there because gcc 2.95.3 whinged about
them, but we now know that its algorithm for complaining is many bricks
shy of a load.
This is certainly a live bug with compilers that optimize similarly
to current gcc, so back-patch to all active branches.
The "pos" variable is modified within PG_TRY and then referenced
within PG_CATCH, so for strict POSIX conformance it must be marked
volatile. Superficially the code looked safe because pos's address
was taken, which was sufficient to force it into memory ... but it's
not sufficient to ensure that the compiler applies updates exactly
where the program text says to. The volatility marking has to extend
into a couple of subroutines too, but I think that's probably a good
thing because the risk of out-of-order updates is mostly in those
subroutines not asyncQueueReadAllNotifications() itself. In principle
the compiler could have re-ordered operations such that an error could
be thrown while "pos" had an incorrect value.
It's unclear how real the risk is here, but for safety back-patch
to all active branches.
On closer inspection, we can remove the "volatile" qualifier on
"using_subtxn" so long as we initialize that before the PG_TRY block,
which there's no particularly good reason not to do.
Also, push the "change" variable inside the PG_TRY so as to remove
all question of whether it needs "volatile", and remove useless
early initializations of "snapshow_now" and "using_subtxn".
Fix unsafe use of a non-volatile variable in PG_TRY/PG_CATCH in
AlterSystemSetConfigFile(). While at it, clean up a bundle of other
infelicities and outright bugs, including corner-case-incorrect linked list
manipulation, a poorly designed and worse documented parse-and-validate
function (which even included some randomly chosen hard-wired substitutes
for the specified elevel in one code path ... wtf?), direct use of open()
instead of fd.c's facilities, inadequate checking of write()'s return
value, and generally poorly written commentary.
Fix unsafe coding around PG_TRY in RelationBuildRowSecurity: can't change
a variable inside PG_TRY and then use it in PG_CATCH without marking it
"volatile". In this case though it seems saner to avoid that by doing
a single assignment before entering the TRY block.
I started out just intending to fix that, but the more I looked at the
row-security code the more distressed I got. This patch also fixes
incorrect construction of the RowSecurityPolicy cache entries (there was
not sufficient care taken to copy pass-by-ref data into the cache memory
context) and a whole bunch of sloppiness around the definition and use of
pg_policy.polcmd. You can't use nulls in that column because initdb will
mark it NOT NULL --- and I see no particular reason why a null entry would
be a good idea anyway, so changing initdb's behavior is not the right
answer. The internal value of '\0' wouldn't be suitable in a "char" column
either, so after a bit of thought I settled on using '*' to represent ALL.
Chasing those changes down also revealed that somebody wasn't paying
attention to what the underlying values of ACL_UPDATE_CHR etc really were,
and there was a great deal of lackadaiscalness in the catalogs.sgml
documentation for pg_policy and pg_policies too.
This doesn't pretend to be a complete code review for the row-security
stuff, it just fixes the things that were in my face while dealing with
the bugs in RelationBuildRowSecurity.
"iterstate" must be marked volatile since it's changed inside the PG_TRY
block and then used in the PG_CATCH stanza. Noted by Mark Wilding of
Salesforce. (We really need to see if we can't get the C compiler to warn
about this.)
Also, reset iterstate to NULL after the mainline ReorderBufferIterTXNFinish
call, to ensure the PG_CATCH block doesn't try to do that a second time.
strncpy() has a well-deserved reputation for being unsafe, so make an
effort to get rid of nearly all occurrences in HEAD.
A large fraction of the remaining uses were passing length less than or
equal to the known strlen() of the source, in which case no null-padding
can occur and the behavior is equivalent to memcpy(), though doubtless
slower and certainly harder to reason about. So just use memcpy() in
these cases.
In other cases, use either StrNCpy() or strlcpy() as appropriate (depending
on whether padding to the full length of the destination buffer seems
useful).
I left a few strncpy() calls alone in the src/timezone/ code, to keep it
in sync with upstream (the IANA tzcode distribution). There are also a
few such calls in ecpg that could possibly do with more analysis.
AFAICT, none of these changes are more than cosmetic, except for the four
occurrences in fe-secure-openssl.c, which are in fact buggy: an overlength
source leads to a non-null-terminated destination buffer and ensuing
misbehavior. These don't seem like security issues, first because no stack
clobber is possible and second because if your values of sslcert etc are
coming from untrusted sources then you've got problems way worse than this.
Still, it's undesirable to have unpredictable behavior for overlength
inputs, so back-patch those four changes to all active branches.
This file hasn't been part of any build since 2005, and even before that
wasn't used unless you configured --with-krb4 (and had a machine without
gethostname(2), obviously). What's more, we haven't actually called
gethostname anywhere since then, either (except in thread_test.c, whose
testing of this function is probably pointless). So we don't need it.
This mode allows vacuumdb to open several server connections to vacuum
or analyze several tables simultaneously.
Author: Dilip Kumar. Some reworking by Álvaro Herrera
Reviewed by: Jeff Janes, Amit Kapila, Magnus Hagander, Andres Freund
When we write tuples out to disk and read them back in, the abbreviated
keys become non-abbreviated, because the readtup routines don't know
anything about abbreviation. But without this fix, the rest of the
code still thinks the abbreviation-aware compartor should be used,
so chaos ensues.
Report by Andrew Gierth; patch by Peter Geoghegan.
contrib/pg_stat_statements will sometimes run the core lexer a second time
on submitted statements. Formerly, if you had standard_conforming_strings
turned off, this led to sometimes getting two copies of any warnings
enabled by escape_string_warning. While this is probably no longer a big
deal in the field, it's a pain for regression testing.
To fix, change the lexer so it doesn't consult the escape_string_warning
GUC variable directly, but looks at a copy in the core_yy_extra_type state
struct. Then, pg_stat_statements can change that copy to disable warnings
while it's redoing the lexing.
It seemed like a good idea to make this happen for all three of the GUCs
consulted by the lexer, not just escape_string_warning. There's not an
immediate use-case for callers to adjust the other two AFAIK, but making
it possible is easy enough and seems like good future-proofing.
Arguably this is a bug fix, but there doesn't seem to be enough interest to
justify a back-patch. We'd not be able to back-patch exactly as-is anyway,
for fear of breaking ABI compatibility of the struct. (We could perhaps
back-patch the addition of only escape_string_warning by adding it at the
end of the struct, where there's currently alignment padding space.)
In the union support proc, we were not checking the hasnulls flag of
value A early enough, so it could be skipped if the "allnulls" flag in
value B is set. Also, a check on the allnulls flag of value "B" was
redundant, so remove it.
Also change inet_minmax_ops to not be the default opclass for type inet,
as a future inclusion operator class would be more useful and it's
pretty difficult to change default opclass for a datatype later on.
(There is no catversion bump for this catalog change; this shouldn't be
a problem.)
Extracted from a larger patch to add an "inclusion" operator class.
Author: Emre Hasegeli
The split between which things need to happen in the C-locale case and
which needed to happen in the locale-aware case was a few bricks short
of a load. Try to fix that.
When REASSIGN and ALTER OWNER TO are used, both the object owner and ACL
list should be changed from the old owner to the new owner. This patch
fixes types, foreign data wrappers, and foreign servers to change their
ACL list properly; they already changed owners properly.
BACKWARD INCOMPATIBILITY?
Report by Alexey Bashtanov
First, when LC_COLLATE = C, bttext_abbrev_convert should use memcpy()
rather than strxfrm() to construct the abbreviated key, because the
authoritative comparator uses memcpy(). If we do anything else here,
we might get inconsistent answers, and the buildfarm says this risk
is not theoretical. It should be faster this way, too.
Second, while I'm looking at bttext_abbrev_convert, convert a needless
use of goto into the loop it's trying to implement into an actual
loop.
Both of the above problems date to the original commit of abbreviated
keys, commit 4ea51cdfe8.
Third, fix a bogus assignment to tss->locale before tss is set up.
That's a new goof in commit b529b65d1b.
Prior to commit 4ea51cdfe8, this function
only had one job, which was to decide whether we could avoid trampolining
through the fmgr layer when performing sort comparisons. As of that
commit, it has a second job, which is to decide whether we can use
abbreviated keys. Unfortunately, those two tasks are somewhat intertwined
in the existing coding, which is likely why neither Peter Geoghegan nor
I noticed prior to commit that this calls pg_newlocale_from_collation() in
cases where it didn't previously. The buildfarm noticed, though.
To fix, rewrite the logic so that the decision as to which comparator to
use is more cleanly separated from the decision about abbreviation.
Most of the Windows buildfarm members (bowerbird, hamerkop, currawong,
jacana, brolga) are unhappy with yesterday's abbreviated keys patch,
although there are some (narwhal, frogmouth) that seem OK with it.
Since there's no obvious pattern to explain why some are working and
others are failing, just disable this across-the-board on Windows for
now. This is a bit unfortunate since the optimization will be a big
win in some cases, but we can't leave the buildfarm broken.
This results in a very substantial reduction in disk space usage during
"make check-world", since that sequence involves creation of numerous
temporary installations. It should also help a bit in the buildfarm, even
though the buildfarm script doesn't create as many temp installations,
because the current script misses deleting some of them; and anyway it
seems better to do this once in one place rather than expecting that
script to get it right every time.
In 9.4 and HEAD, also undo the unwise choice in commit b1aebbb6a8
to report strerror(errno) after a rmtree() failure. rmtree has already
reported that, possibly for multiple failures with distinct errnos; and
what's more, by the time it returns there is no good reason to assume
that errno still reflects the last reportable error. So reporting errno
here is at best redundant and at worst badly misleading.
Back-patch to all supported branches, so that future revisions of the
buildfarm script can rely on this behavior.
Per discussion, change the log level of this message to be LOG not WARNING.
The main point of this change is to avoid causing buildfarm run failures
when the stats collector is exceptionally slow to respond, which it not
infrequently is on some of the smaller/slower buildfarm members.
This change does lose notice to an interactive user when his stats query
is looking at out-of-date stats, but the majority opinion (not necessarily
that of yours truly) is that WARNING messages would probably not get
noticed anyway on heavily loaded production systems. A LOG message at
least ensures that the problem is recorded somewhere where bulk auditing
for the issue is possible.
Also, instead of an untranslated "pgstat wait timeout" message, provide
a translatable and hopefully more understandable message "using stale
statistics instead of current ones because stats collector is not
responding". The original text was written hastily under the assumption
that it would never really happen in practice, which we now know to be
unduly optimistic.
Back-patch to all active branches, since we've seen the buildfarm issue
in all branches.
As noted by Tom Lane the improvements in 4b4b680c3d had the problem
that in some situations we searched, entered and modified entries in
the private refcount hash while holding a spinlock. I had tried to
keep the logic entirely local to PinBuffer_Locked(), but that's not
really possible given it's called with a spinlock held...
Besides being disadvantageous from a performance point of view, this
also has problems with error handling safety. If we failed inserting
an entry into the hashtable due to an out of memory error, we'd error
out with a held spinlock. Not good.
Change the way private refcounts are manipulated: Before a buffer can
be tracked an entry has to be reserved using
ReservePrivateRefCountEntry(); then, if a entry is not found using
GetPrivateRefCountEntry(), it can be entered with
NewPrivateRefCountEntry().
Also take advantage of the fact that PinBuffer_Locked() currently is
never called for buffers that already have been pinned by the current
backend and don't search the private refcount entries for preexisting
local pins. That results in a small, but measurable, performance
improvement.
Additionally make ReleaseBuffer() always call UnpinBuffer() for shared
buffers. That avoids duplicating work in an eventual UnpinBuffer()
call that already has been done in ReleaseBuffer() and also saves some
code.
Per discussion with Tom Lane.
Discussion: 15028.1418772313@sss.pgh.pa.us
This commit extends the SortSupport infrastructure to allow operator
classes the option to provide abbreviated representations of Datums;
in the case of text, we abbreviate by taking the first few characters
of the strxfrm() blob. If the abbreviated comparison is insufficent
to resolve the comparison, we fall back on the normal comparator.
This can be much faster than the old way of doing sorting if the
first few bytes of the string are usually sufficient to resolve the
comparison.
There is the potential for a performance regression if all of the
strings to be sorted are identical for the first 8+ characters and
differ only in later positions; therefore, the SortSupport machinery
now provides an infrastructure to abort the use of abbreviation if
it appears that abbreviation is producing comparatively few distinct
keys. HyperLogLog, a streaming cardinality estimator, is included in
this commit and used to make that determination for text.
Peter Geoghegan, reviewed by me.
The code used sizeof(ItemPointerData) where sizeof(ItemIdData) is correct,
since we're trying to account for a tuple's line pointer. Spotted by
Tomonari Katsumata (bug #12584).
Although this mistake is of very long standing, no back-patch, since it's
a relatively harmless error and changing it would risk changing default
planner behavior in stable branches. (I don't see any change in regression
test outputs here, but the buildfarm may think differently.)
pg_dump.c:dumDatabase() called ArchiveEntry() with the results of a a
query that was PQclear()ed a couple lines earlier.
Backpatch to 9.2 where security labels for shared objects where
introduced.
Relying on the normal shared latch simplifies interrupt/signal
handling because we can rely on all signal handlers setting the proc
latch. That in turn allows us to avoid the use of
ImmediateInterruptOK, which arguably isn't correct because
WaitLatchOrSocket isn't declared to be immediately interruptible.
Also change sections that wait on the walsender's latch to notice
interrupts quicker/more reliably and make them more consistent with
each other.
This is part of a larger "get rid of ImmediateInterruptOK" series.
Discussion: 20150115020335.GZ5245@awork2.anarazel.de
Up to now, EXPLAIN has contented itself with printing the sort expressions
in a Sort or Merge Append plan node. This patch improves that by
annotating the sort keys with COLLATE, DESC, USING, and/or NULLS FIRST/LAST
whenever nondefault sort ordering options are used. The output is now a
reasonably close approximation of an ORDER BY clause equivalent to the
plan's ordering.
Marius Timmer, Lukas Kreft, and Arne Scheffer; reviewed by Mike Blackwell.
Some additional hacking by me.
Currently, a backend will reset it's PGXACT->xmin value when it doesn't
have any registered snapshots left. That covered the common case that a
transaction in read committed mode runs several queries, one after each
other, as there would be no snapshots active between those queries.
However, if you hold cursors across each of the query, we didn't get a
chance to reset xmin.
To make that better, keep all the registered snapshots in a pairing heap,
ordered by xmin so that it's always quick to find the snapshot with the
smallest xmin. That allows us to advance PGXACT->xmin whenever the oldest
snapshot is deregistered, even if there are others still active.
Per discussion originally started by Jeff Davis back in 2009 and more
recently by Robert Haas.
For no significant extra complexity, we can cache knowledge that the
target page is lossy, and save a hash_search per iteration in that
case as well. This probably makes little difference, since the extra
rechecks that must occur when pages are lossy are way more expensive
than anything we can save here ... but we might as well do it if we're
going to cache anything.
When adding a large number of tuples to a TID bitmap using
tbm_add_tuples() sometimes a lot of time was spent looking up a page's
entry in the bitmap's internal hashtable.
Improve efficiency by caching the last accessed page, while iterating
over the passed in tuples, hoping consecutive tuples will often be on
the same page. In many cases that's a good bet, and in the rest the
added overhead isn't big.
Discussion: 54479A85.8060309@sigaev.ru
Author: Teodor Sigaev
Reviewed-By: David Rowley
Previous fix mapped "Norwegian (Bokmål)" locale, which contains a non-ASCII
character, to the pure ASCII alias "norwegian-bokmal". However, it turns
out that more recent versions of the CRT library, in particular MSVCR110
(Visual Studio 2012), changed the behaviour of setlocale() so that if
you pass "norwegian-bokmal" to setlocale, it returns "Norwegian_Norway".
That meant trouble, when setlocale(..., NULL) first returned
"Norwegian (Bokmål)_Norway", which we mapped to "norwegian-bokmal_Norway",
but another call to setlocale(..., "norwegian-bokmal_Norway") returned
"Norwegian_Norway". That caused PostgreSQL to think that they are different
locales, and therefore not compatible. That caused initdb to fail at
CREATE DATABASE.
Older CRT versions seem to accept "Norwegian_Norway" too, so change the
mapping to return "Norwegian_Norway" instead of "norwegian-bokmal".
Backpatch to 9.2 like the previous attempt. We haven't made a release that
includes the previous fix yet, so we don't need to worry about changing the
locale of existing clusters from "norwegian-bokmal" to "Norwegian_Norway".
(Doing any mapping like this at all requires changing the locale of
existing databases; the release notes need to include instructions for
that).
Commit 894459e59f revealed this option to
be broken for NLS builds on Darwin, but "make -C contrib/unaccent check"
and the buildfarm client rely on it. Fix that configuration by
redefining the option to imply LANG=C on Darwin. In passing, use LANG=C
instead of LANG=en on Windows; since only postmaster startup uses that
value, testers are unlikely to notice the change. Back-patch to 9.0,
like the predecessor commit.
Up to now, the "child" executor state trees generated for EvalPlanQual
rechecks have simply shared the ResultRelInfo arrays used for the original
execution tree. However, this leads to dangling-pointer problems, because
ExecInitModifyTable() is all too willing to scribble on some fields of the
ResultRelInfo(s) even when it's being run in one of those child trees.
This trashes those fields from the perspective of the parent tree, because
even if the generated subtree is logically identical to what was in use in
the parent, it's in a memory context that will go away when we're done
with the child state tree.
We do however want to share information in the direction from the parent
down to the children; in particular, fields such as es_instrument *must*
be shared or we'll lose the stats arising from execution of the children.
So the simplest fix is to make a copy of the parent's ResultRelInfo array,
but not copy any fields back at end of child execution.
Per report from Manuel Kniep. The added isolation test is based on his
example. In an unpatched memory-clobber-enabled build it will reliably
fail with "ctid is NULL" errors in all branches back to 9.1, as a
consequence of junkfilter->jf_junkAttNo being overwritten with $7f7f.
This test cannot be run as-is before that for lack of WITH syntax; but
I have no doubt that some variant of this problem can arise in older
branches, so apply the code change all the way back.
The flag is supposed to be copied from the record. Same issue with
track_commit_timestamps, but that's master-only.
Report and fix by Petr Jalinek. Backpatch to 9.4, where wal_log_hints was
added.
The folly of the previous arrangement was just demonstrated: there's no
convenient way to add fields to ExplainState without breaking ABI, even
if callers have no need to touch those fields. Since we might well need
to do that again someday in back branches, let's change things so that
only explain.c has to have sizeof(ExplainState) compiled into it. This
costs one extra palloc() per EXPLAIN operation, which is surely pretty
negligible.
As of 9.3, ruleutils.c goes to some lengths to ensure that table and column
aliases used in its output are unique. Of course this takes more time than
was required before, which in itself isn't fatal. However, EXPLAIN was set
up so that recalculation of the unique aliases was repeated for each
subexpression printed in a plan. That results in O(N^2) time and memory
consumption for large plan trees, which did not happen in older branches.
Fortunately, the expensive work is the same across a whole plan tree,
so there is no need to repeat it; we can do most of the initialization
just once per query and re-use it for each subexpression. This buys
back most (not all) of the performance loss since 9.2.
We need an extra ExplainState field to hold the precalculated deparse
context. That's no problem in HEAD, but in the back branches, expanding
sizeof(ExplainState) seems risky because third-party extensions might
have local variables of that struct type. So, in 9.4 and 9.3, introduce
an auxiliary struct to keep sizeof(ExplainState) the same. We should
refactor the APIs to avoid such local variables in future, but that's
material for a separate HEAD-only commit.
Per gripe from Alexey Bashtanov. Back-patch to 9.3 where the issue
was introduced.
The possibly, depending on compiler settings, generated warning was
"warning: `S_UNLOCK' redefined".
The hppa spinlock implementation doesn't follow the rules of s_lock.h
and provides a gcc specific implementation outside of the the part of
the file that's supposed to do that. It does so to avoid duplication
between the HP compiler and gcc. That unfortunately means that
S_UNLOCK is already defined when the HPPA specific section is reached.
Undefine the generic fallback S_UNLOCK definition inside the HPPA
section. That's far from pretty, but has the big advantage of being
simple. If somebody is interested to fix this in a prettier way...
This presumably got broken in the course of 0709b7ee72.
Discussion: 20150114225919.GY5245@awork2.anarazel.de
Per complaint from Tom Lane.
To do so, move InitializeLatchSupport() into the new common process
initialization functions, and add a new global variable MyLatch.
MyLatch is usable as soon InitPostmasterChild() has been called
(i.e. very early during startup). Initially it points to a process
local latch that exists in all processes. InitProcess/InitAuxiliaryProcess
then replaces that local latch with PGPROC->procLatch. During shutdown
the reverse happens.
This is primarily advantageous for two reasons: For one it simplifies
dealing with the shared process latch, especially in signal handlers,
because instead of having to check for MyProc, MyLatch can be used
unconditionally. For another, a later patch that makes FEs/BE
communication use latches, now can rely on the existence of a latch,
even before having gone through InitProcess.
Discussion: 20140927191243.GD5423@alap3.anarazel.de
Autoconf has known about automatically selecting -Ae when needed for
quite some time now, so remove the redundant addition in template/hpux.
Noted while setting up buildfarm member pademelon.
Since commit 626eb02198 has introduced the auxiliary process
infrastructure, bootstrap_signals() was never used when forked from
postmaster.
Remove the IsUnderPostmaster specific code, and add a appropriate
assertion.
Move common code, that was duplicated in every postmaster child/every
standalone process, into two functions in miscinit.c. Not only does
that already result in a fair amount of net code reduction but it also
makes it much easier to remove more duplication in the future. The
prime motivation wasn't code deduplication though, but easier addition
of new common code.
Commit b94ce6e80 reordered postmaster's startup sequence so that the
tempfile directory is only cleaned up after all the necessary state
for pg_ctl is collected. Unfortunately the chosen location is after
the syslogger has been started; which normally is fine, except for
!WIN32 EXEC_BACKEND builds, which pass information to children via
files in the temp directory.
Move the call to RemovePgTempFiles() to just before the syslogger has
started. That's the first child we fork.
Luckily EXEC_BACKEND is pretty much only used by endusers on windows,
which has a separate method to pass information to children. That
means the real world impact of this bug is very small.
Discussion: 20150113182344.GF12272@alap3.anarazel.de
Backpatch to 9.1, just as the previous commit was.
Since their introduction latches have required barriers in SetLatch
and ResetLatch - but when they were introduced there wasn't any
barrier abstraction. Instead latches were documented to rely on the
callsites to provide barrier semantics.
Now that the barrier support looks halfway complete, add the necessary
barriers to both latch implementations.
Also remove a now superflous lock acquisition from syncrep.c and a
superflous (and insufficient) barrier from freelist.c. There might be
other cases that can now be simplified, but those are the only ones
I've seen on a quick scan.
We might want to backpatch this at some later point, but right now the
barrier infrastructure in the backbranches isn't totally on par with
master.
Discussion: 20150112154026.GB2092@awork2.anarazel.de
So far WaitLatchOrSocket() required to pass in WL_SOCKET_READABLE as
that solely was used to indicate error conditions, like EOF. Waiting
for WL_SOCKET_WRITEABLE would have meant to busy wait upon socket
errors.
Adjust the API to signal errors by returning the socket as readable,
writable or both, depending on WL_SOCKET_READABLE/WL_SOCKET_WRITEABLE
being specified. It would arguably be nicer to return WL_SOCKET_ERROR
but that's not possible on platforms and would probably also result in
more complex callsites.
This previously had explicitly been forbidden in e42a21b9e6, as
there was no strong use case at that point. We now are looking into
making FE/BE communication use latches, so changing this makes sense.
There also are some portability concerns because there cases of older
platforms where select(2) is known to, in violation of POSIX, not
return a socket as writable after the peer has closed it. So far the
platforms where that's the case provide a working poll(2). If we find
one where that's not the case, we'll need to add a workaround for that
platform.
Discussion: 20140927191243.GD5423@alap3.anarazel.de
Reviewed-By: Heikki Linnakangas, Noah Misch
I noticed the "vacuum" regression test taking really significantly longer
than it used to on a slow machine. Investigation pointed the finger at
commit e415b469b3, which added creation of
an index using an extremely expensive index function. That function was
evidently meant to be applied only twice ... but the test re-used an
existing test table, which up till a couple lines before that had had over
two thousand rows. Depending on timing of the concurrent regression tests,
the intervening VACUUMs might have been unable to remove those
recently-dead rows, and then the index build would need to create index
entries for them too, leading to the wrap_do_analyze() function being
executed 2000+ times not twice. Avoid this by using a different table
that is guaranteed to have only the intended two rows in it.
Back-patch to 9.0, like the commit that created the problem.
Some spaces were missing, and putting the affected tuple offset first in
the lock cases instead of the locking data makes more sense.
No backpatch since this is cosmetic and surrounding code has changed.
Commit 3f88672a4 neglected to update the AlterExtensionContentsStmt
production in the grammar to use TypeName to represent types when
passing objects to get_object_address.
Reported as a pg_upgrade failure by Jeff Janes.
The mechanism added in commit dbdf9679d7
for associating the correct translation domain with errcontext strings
potentially fails in cases where errcontext() is used within an ereport()
macro. Such usage was not originally envisioned for errcontext(), but we
do have a few places that do it. In this situation, the intended comma
expression becomes just a couple of arguments to errfinish(), which the
compiler might choose to evaluate right-to-left.
Fortunately, in such cases the textdomain for the errcontext string must
be the same as for the surrounding ereport. So we can fix this by letting
errstart initialize context_domain along with domain; then it will have
the correct value no matter which order the calls occur in. (Note that
error stack callback functions are not invoked until errfinish, so normal
usage of errcontext won't affect what happens for errcontext calls within
the ereport macro.)
In passing, make sure that errcontext calls within the main backend set
context_domain to something non-NULL. This isn't a live bug because
NULL would select the current textdomain() setting which should be the
right thing anyway --- but it seems better to handle this completely
consistently with the regular domain field.
Per report from Dmitry Voronin. Backpatch to 9.3; before that, there
wasn't any attempt to ensure that errcontext strings were translated
in an appropriate domain.
Back in ed0b409, PGPROC was split and moved to static variables in
procarray.c, with procs in ProcArrayStruct replaced by an array of
integers representing process numbers (pgprocnos), with -1 indicating a
dead process which has yet to be removed. Access to procArray is
generally done under ProcArrayLock and therefore most code does not have
to concern itself with -1 entries.
However, MinimumActiveBackends intentionally does not take
ProcArrayLock, which means it has to be extra careful when accessing
procArray. Prior to ed0b409, this was handled by checking for a NULL
in the pointer array, but that check was no longer valid after the
split. Coverity pointed out that the check could never happen and so
it was removed in 5592eba. That didn't make anything worse, but it
didn't fix the issue either.
The correct fix is to check for pgprocno == -1 and skip over that entry
if it is encountered.
Back-patch to 9.2, since there can be attempts to access the arrays
prior to their start otherwise. Note that the changes prior to 9.4 will
look a bit different due to the change in 5592eba.
Note that MinimumActiveBackends only returns a bool for heuristic
purposes and any pre-array accesses are strictly read-only and so there
is no security implication and the lack of fields complaints indicates
it's very unlikely to run into issues due to this.
Pointed out by Noah.
Commit 0eea8047bf introduced some overly
optimistic assumptions about what could be in a local struct variable's
initializer. (This might in fact be valid code according to C99, but I've
got at least one pre-C99 compiler that falls over on those nonconstant
address expressions.) There is no reason whatsoever for main()'s workspace
to not be static, so revert long_options[] to a static and make the
DumpOptions struct static as well.
We had code that supposed that some platforms might offer a nonstandard
version of getpwuid_r() with only four arguments. However, the 5-argument
definition has been standardized at least since the Single Unix Spec v2,
which is our normal reference for what's portable across all Unix-oid
platforms. (What's more, this wasn't the only pre-standardization version
of getpwuid_r(); my old HPUX 10.20 box has still another signature.)
So let's just get rid of the now-useless configure step.
Some users run their applications in chroot environments that lack an
/etc/passwd file. This means that the current UID's user name and home
directory are not obtainable. libpq used to be all right with that,
so long as the database role name to use was specified explicitly.
But commit a4c8f14364 broke such cases by
causing any failure of pg_fe_getauthname() to be treated as a hard error.
In any case it did little to advance its nominal goal of causing errors
in pg_fe_getauthname() to be reported better. So revert that and instead
put some real error-reporting code in place. This requires changes to the
APIs of pg_fe_getauthname() and pqGetpwuid(), since the latter had
departed from the POSIX-specified API of getpwuid_r() in a way that made
it impossible to distinguish actual lookup errors from "no such user".
To allow such failures to be reported, while not failing if the caller
supplies a role name, add a second call of pg_fe_getauthname() in
connectOptions2(). This is a tad ugly, and could perhaps be avoided with
some refactoring of PQsetdbLogin(), but I'll leave that idea for later.
(Note that the complained-of misbehavior only occurs in PQsetdbLogin,
not when using the PQconnect functions, because in the latter we will
never bother to call pg_fe_getauthname() if the user gives a role name.)
In passing also clean up the Windows-side usage of GetUserName(): the
recommended buffer size is 257 bytes, the passed buffer length should
be the buffer size not buffer size less 1, and any error is reported
by GetLastError() not errno.
Per report from Christoph Berg. Back-patch to 9.4 where the chroot
failure case was introduced. The generally poor reporting of errors
here is of very long standing, of course, but given the lack of field
complaints about it we won't risk changing these APIs further back
(even though they're theoretically internal to libpq).
If the compiler/arch combination does not provide compiler barriers,
provide a fallback. That fallback simply consists out of a function
call into a externally defined function. That should guarantee
compiler barrierer semantics except for compilers that do inter
translation unit/global optimization - those better provide an actual
compiler barrier.
Hopefully this fixes Tom's report of linker failures due to
pg_compiler_barrier_impl not being provided.
I'm not backpatching this commit as it builds on the new atomics
infrastructure. If we decide an equivalent fix needs to be
backpatched, I'll do so in a separate commit.
Discussion: 27746.1420930690@sss.pgh.pa.us
Per report from Tom Lane.
I failed to recognize that pg_atomic_uint64 wasn't guaranteed to be 8
byte aligned on some 32bit platforms - which it has to be on some
platforms to guarantee the desired atomicity and which we assert.
As this is all compiler specific code anyway we can just rely on
compiler specific tricks to enforce alignment.
I've been unable to find concrete documentation about the version that
introduce the sunpro alignment support, so that might need additional
guards.
I've verified that this works with gcc x86 32bit, but I don't have
access to any other 32bit environment.
Discussion: op.xpsjdkil0sbe7t@vld-kuci
Per report from Vladimir Koković.
For some reason I overlooked in GETTEXT_TRIGGERS that the right argument
be read by gettext in 7fcbf6a405. This
will drop the translation percentages for the backend all the way back
to 9.3 ...
Problem reported by Heikki.
The event trigger test for rowsecurity can cause problems for other
tests which are run in parallel with it. Instead of running that test
in the rowsecurity set, move it to the event_trigger set, which runs
isolated from other tests.
Also reverts 7161b08, which moved rowsecurity into its own test group.
That's no longer necessary, now that the event trigger test is gone from
the rowsecurity set of tests.
Pointed out by Tom.
The new logging introduced in 35192f06 made the incorrect assumption
that scan_all vacuums would always wait for buffer pins; but they only
do so if the page actually needs to be frozen.
Fix that inaccuracy by removing the difference in log output based on
scan_all and just always remove the same message. I chose to keep the
split log message from the original commit for now, it seems likely
that it'll be of use in the future.
Also merge the line about buffer pins in autovacuum's log output into
the existing "pages: ..." line. It seems odd to have a separate line
about pins, without the "topic: " prefix others have.
Also rename the new 'pinned_pages' variable to 'pinskipped_pages'
because it actually tracks the number of pages that could *not* be
pinned.
Discussion: 20150104005324.GC9626@awork2.anarazel.de
The previous commit introduced its report at LOG level to avoid
surprises at minor release upgrade time. Compel users deploying the
next major release to also deploy the reported workaround.
Darwin --enable-nls builds use a substitute setlocale() that may start a
thread. Buildfarm member orangutan experienced BackendList corruption
on account of different postmaster threads executing signal handlers
simultaneously. Furthermore, a multithreaded postmaster risks undefined
behavior from sigprocmask() and fork(). Emit LOG messages about the
problem and its workaround. Back-patch to 9.0 (all supported versions).
Typical server invocations already achieved that. Invalid locale
settings in the initial postmaster environment interfered, as could
malloc() failure. Setting "LC_MESSAGES=pt_BR.utf8 LC_ALL=invalid" in
the postmaster environment will now choose C-locale messages, not
Brazilian Portuguese messages. Most localized programs, including all
PostgreSQL frontend executables, do likewise. Users are unlikely to
observe changes involving locale categories other than LC_MESSAGES.
CheckMyDatabase() ensures that we successfully set LC_COLLATE and
LC_CTYPE; main() sets the remaining three categories to locale "C",
which almost cannot fail. Back-patch to 9.0 (all supported versions).
vacuum()'s static variable handling makes it non-reentrant; an ensuing
null pointer deference crashed the backend. Back-patch to 9.0 (all
supported versions).
Since commit ba94518a, we used XLogFileOpen to open the next segment for
writing, but if the end-of-recovery happens exactly at a segment boundary,
the new segment might not exist yet. (Before ba94518a, XLogFileOpen was
correct, because we would open the previous segment if the switch happened
at the boundary.)
Instead of trying to create it if necessary, it's simpler to not bother
opening the segment at all. XLogWrite() will open or create it soon anyway,
after writing the checkpoint or end-of-recovery record.
Reported by Andres Freund.
Previously, the xml value resulting from an xpath query would not have
namespace declarations if the namespace declarations were attached to
an ancestor element in the input xml value. That means the output value
was not correct XML. Fix that by running the result value through
xmlCopyNode(), which produces the correct namespace declarations.
Author: Ali Akbar <the.apaan@gmail.com>
When using a historic snapshot for logical decoding it can validly
happen that a relation that's in the relcache isn't visible to that
historic snapshot. E.g. if a newly created relation is referenced in
the query that uses the SQL interface for logical decoding and a
sinval reset occurs.
The earlier commit that fixed the error handling for that corner case
already improves the situation as a ERROR is better than hitting an
assertion... But it's obviously not good enough. So additionally
allow that case without an error if a historic snapshot is set up -
that won't allow an invalid entry to stay in the cache because it's a)
already marked invalid and will thus be rebuilt during the next access
b) the syscaches will be reset at the end of decoding.
There might be prettier solutions to handle this case, but all that we
could think of so far end up being much more complex than this quite
simple fix.
This fixes the assertion failures reported by the buildfarm (markhor,
tick, leech) after the introduction of new regression tests in
89fd41b390. The failure there weren't actually directly caused by
CLOBBER_CACHE_ALWAYS but the extraordinary long runtimes due to it
lead to sinval resets triggering the behaviour.
Discussion: 22459.1418656530@sss.pgh.pa.us
Backpatch to 9.4 where logical decoding was introduced.
The corner case where a relcache invalidation tried to rebuild the
entry for a referenced relation but couldn't find it in the catalog
wasn't correct.
The code tried to RelationCacheDelete/RelationDestroyRelation the
entry. That didn't work when assertions are enabled because the latter
contains an assertion ensuring the refcount is zero. It's also more
generally a bad idea, because by virtue of being referenced somebody
might actually look at the entry, which is possible if the error is
trapped and handled via a subtransaction abort.
Instead just error out, without deleting the entry. As the entry is
marked invalid, the worst that can happen is that the invalid (and at
some point unused) entry lingers in the relcache.
Discussion: 22459.1418656530@sss.pgh.pa.us
There should be no way to hit this case < 9.4 where logical decoding
introduced a bug that can hit this. But since the code for handling
the corner case is there it should do something halfway sane, so
backpatch all the the way back. The logical decoding bug will be
handled in a separate commit.
This never worked, I think. Per report from Marc Munro.
In passing, fix funny spacing in the COMMENT ON command as a result of
excess space in the "label" string.
A oversight in 2c0a485896 causes 'could not create archive status file
"...": No such file or directory' errors in pg_receivexlog if the
target directory doesn't happen to contain a archive_status
directory. That's due to a stupidly left over 'true' constant instead
of mark_done being passed down to ProcessXLogDataMsg().
The bug is only present in the master branch, and luckily wasn't
released.
Spotted by Fujii Masao.
Commit 0e5680f473 contained a thinko
mixing LOCKMODE with LockTupleMode. This caused misbehavior in the case
where a tuple is marked with a multixact with at most a FOR SHARE lock,
and another transaction tries to acquire a FOR NO KEY EXCLUSIVE lock;
this case should block but doesn't.
Include a new isolation tester spec file to explicitely try all the
tuple lock combinations; without the fix it shows the problem:
starting permutation: s1_begin s1_lcksvpt s1_tuplock2 s2_tuplock3 s1_commit
step s1_begin: BEGIN;
step s1_lcksvpt: SELECT * FROM multixact_conflict FOR KEY SHARE; SAVEPOINT foo;
a
1
step s1_tuplock2: SELECT * FROM multixact_conflict FOR SHARE;
a
1
step s2_tuplock3: SELECT * FROM multixact_conflict FOR NO KEY UPDATE;
a
1
step s1_commit: COMMIT;
With the fixed code, step s2_tuplock3 blocks until session 1 commits,
which is the correct behavior.
All other cases behave correctly.
Backpatch to 9.3, like the commit that introduced the problem.
These calls are pretty much guaranteed not to fail unless something
has gone horribly wrong, and even in that case we'd just error out a
short time later. But since several code checkers complain about the
missing check it seems worthwile to fix it nonetheless.
Pointed out by Coverity.
As every error in mark_file_as_archived() will lead to a failure of
pg_basebackup the FD leak couldn't ever lead to a real problem. It
seems better to fix the leak anyway though, rather than silence
Coverity, as the usage of the function might get extended or copied at
some point in the future.
Pointed out by Coverity.
Backpatch to 9.2, like the relevant part of the previous patch.
WAL (and timeline history) files created by pg_basebackup did not
maintain the new base backup's archive status. That's currently not a
problem if the new node is used as a standby - but if that node is
promoted all still existing files can get archived again. With a high
wal_keep_segment settings that can happen a significant time later -
which is quite confusing.
Change both the backend (for the -x/-X fetch case) and pg_basebackup
(for -X stream) itself to always mark WAL/timeline files included in
the base backup as .done. That's in line with walreceiver.c doing so.
The verbosity of the pg_basebackup changes show pretty clearly that it
needs some refactoring, but that'd result in not be backpatchable
changes.
Backpatch to 9.1 where pg_basebackup was introduced.
Discussion: 20141205002854.GE21964@awork2.anarazel.de
Backpatch to 9.3 where src/common was introduce, because a bugfix that
needs to be backpatched, requires the function. Earlier branches will
have to duplicate the code.
At one point in the development of this feature, it was claimed that
allowing negative values would be useful to compensate for timezone
differences between master and slave servers. That was based on a mistaken
assumption that commit timestamps are recorded in local time; but of course
they're in UTC. Nor is a negative apply delay likely to be a sane way of
coping with server clock skew. However, the committed patch still treated
negative delays as doing something, and the timezone misapprehension
survived in the user documentation as well.
If recovery_min_apply_delay were a proper GUC we'd just set the minimum
allowed value to be zero; but for the moment it seems better to treat
negative settings as if they were zero.
In passing do some extra wordsmithing on the parameter's documentation,
including correcting a second misstatement that the parameter affects
processing of Restore Point records.
Issue noted by Michael Paquier, who also provided the code patch; doc
changes by me. Back-patch to 9.4 where the feature was introduced.
The short-lived event trigger in the rowsecurity test causes irreproducible
failures when the concurrent tests do something that the event trigger
can't cope with. Per buildfarm.
This might help us debug what's happening on some buildfarm members.
In passing, reduce the message from ereport to elog --- it doesn't seem
like this should be a user-facing case, so not worth translating.
For simple boolean variables such as ON_ERROR_STOP, psql has for a long
time recognized variant spellings of "on" and "off" (such as "1"/"0"),
and it also made a point of warning you if you'd misspelled the setting.
But these conveniences did not exist for other keyword-valued variables.
In particular, though ECHO_HIDDEN and ON_ERROR_ROLLBACK include "on" and
"off" as possible values, none of the alternative spellings for those were
recognized; and to make matters worse the code would just silently assume
"on" was meant for any unrecognized spelling. Several people have reported
getting bitten by this, so let's fix it. In detail, this patch:
* Allows all spellings recognized by ParseVariableBool() for ECHO_HIDDEN
and ON_ERROR_ROLLBACK.
* Reports a warning for unrecognized values for COMP_KEYWORD_CASE, ECHO,
ECHO_HIDDEN, HISTCONTROL, ON_ERROR_ROLLBACK, and VERBOSITY.
* Recognizes all values for all these variables case-insensitively;
previously there was a mishmash of case-sensitive and case-insensitive
behaviors.
Back-patch to all supported branches. There is a small risk of breaking
existing scripts that were accidentally failing to malfunction; but the
consensus is that the chance of detecting real problems and preventing
future mistakes outweighs this.
The one for the OCLASS_COLLATION case was noticed by
CLOBBER_CACHE_ALWAYS buildfarm members; the others I spotted by manual
code inspection.
Also remove a redundant check.
These columns can be passed to pg_get_object_address() and used to
reconstruct the dropped objects identities in a remote server containing
similar objects, so that the drop can be replicated.
Reviewed by Stephen Frost, Heikki Linnakangas, Abhijit Menon-Sen, Andres
Freund.
This function returns object type and objname/objargs arrays, which can
be passed to pg_get_object_address. This is especially useful because
the textual representation can be copied to a remote server in order to
obtain the corresponding OID-based address. In essence, this function
is the inverse of recently added pg_get_object_address().
Catalog version bumped due to the addition of the new function.
Also add docs to pg_get_object_address.
In COMMENT, DROP, SECURITY LABEL, and the new pg_get_object_address
function, we were representing types as a list of names, same as other
objects; but types are special objects that require their own
representation to be totally accurate. In the original COMMENT code we
had a note about fixing it which was lost in the course of c10575ff00.
Change all those places to use TypeName instead, as suggested by that
comment.
Right now the original coding doesn't cause any bugs, so no backpatch.
It is more problematic for proposed future code that operate with object
addresses from the SQL interface; type details such as array-ness are
lost when working with the degraded representation.
Thanks to Petr Jelínek and Dimitri Fontaine for offlist help on finding
a solution to a shift/reduce grammar conflict.
Commit 36a35c55 changed the divisor from 3 to 6, for no apparent reason.
Reducing GinMaxItemSize like that created a dump/reload hazard: loading a
9.3 database to 9.4 might fail with "index row size XXX exceeds maximum 1352
for index ..." error. Revert the change.
While we're at it, make the calculation slightly more accurate. It used to
divide the available space on page by three, then subtract
sizeof(ItemIdData), and finally round down. That's not totally accurate; the
item pointers for the three items are packed tight right after the page
header, but there is alignment padding after the item pointers. Change the
calculation to reflect that, like BTMaxItemSize does. I tested this with
different block sizes on systems with 4- and 8-byte alignment, and the value
after the final MAXALIGN_DOWN was the same with both methods on all
configurations. So this does not make any difference currently, but let's be
tidy.
Also add a comment explaining what the macro does.
This fixes bug #12292 reported by Robert Thaler. Backpatch to 9.4, where the
bug was introduced.
It is causing trouble when run in parallel mode, because dropping the
function other sessions are running concurrently causes them to fail due
to inability to find the function.
Per buildfarm, as noted by Tom Lane.
We were trying to acquire the lock even when we were subsequently
not sleeping in some other transaction, which opens us up unnecessarily
to deadlocks. In particular, this is troublesome if an update tries to
lock an updated version of a tuple and finds itself doing EvalPlanQual
update chain walking; more than two sessions doing this concurrently
will find themselves sleeping on each other because the HW tuple lock
acquisition in heap_lock_tuple called from EvalPlanQualFetch races with
the same tuple lock being acquired in heap_update -- one of these
sessions sleeps on the other one to finish while holding the tuple lock,
and the other one sleeps on the tuple lock.
Per trouble report from Andrew Sackville-West in
http://www.postgresql.org/message-id/20140731233051.GN17765@andrew-ThinkPad-X230
His scenario can be simplified down to a relatively simple
isolationtester spec file which I don't include in this commit; the
reason is that the current isolationtester is not able to deal with more
than one blocked session concurrently and it blocks instead of raising
the expected deadlock. In the future, if we improve isolationtester, it
would be good to include the spec file in the isolation schedule. I
posted it in
http://www.postgresql.org/message-id/20141212205254.GC1768@alvh.no-ip.org
Hat tip to Mark Kirkwood, who helped diagnose the trouble.
Windows versions later than Windows Server 2003 map "localhost" to ::1.
Account for that in the generated pg_hba.conf, fixing another oversight
in commit f6dc6dd5ba. Back-patch to 9.0,
like that commit.
David Rowley and Noah Misch
This reverts commit 60838df922.
That change needs a bit more thought to be workable. In view of
the potentially machine-dependent stuff that went in today,
we need all of the buildfarm to be testing those other changes.
StrategyGetBuffer() has proven to be a bottleneck in a number of
buffer acquisition heavy workloads. To some degree this has already
been alleviated by 5d7962c6, but it still can be quite a heavy
bottleneck. The problem is that in unfortunate usage patterns a
single StrategyGetBuffer() call will have to look at a large number of
buffers - in turn making it likely that the process will be put to
sleep while still holding the spinlock.
Replace most of the usage of the buffer_strategy_lock spinlock for the
clock sweep by a atomic nextVictimBuffer variable. That variable,
modulo NBuffers, is the current hand of the clock sweep. The buffer
clock-sweep then only needs to acquire the spinlock after a
wraparound. And even then only in the process that did the wrapping
around. That alleviates nearly all the contention on the relevant
spinlock, although significant contention on the cacheline can still
exist.
Reviewed-By: Robert Haas and Amit Kapila
Discussion: 20141010160020.GG6670@alap3.anarazel.de,
20141027133218.GA2639@awork2.anarazel.de
The old LWLock implementation had the problem that concurrent lock
acquisitions required exclusively acquiring a spinlock. Often that
could lead to acquirers waiting behind the spinlock, even if the
actual LWLock was free.
The new implementation doesn't acquire the spinlock when acquiring the
lock itself. Instead the new atomic operations are used to atomically
manipulate the state. Only the waitqueue, used solely in the slow
path, is still protected by the spinlock. Check lwlock.c's header for
an explanation about the used algorithm.
For some common workloads on larger machines this can yield
significant performance improvements. Particularly in read mostly
workloads.
Reviewed-By: Amit Kapila and Robert Haas
Author: Andres Freund
Discussion: 20130926225545.GB26663@awork2.anarazel.de
Besides being shorter and much easier to read it changes the logic in
LWLockRelease() to release all shared lockers when waking up any. This
can yield some significant performance improvements - and the fairness
isn't really much worse than before, as we always allowed new shared
lockers to jump the queue.
Hiding context messages usually is not a good idea - except for rather
verbose debugging/development utensils like LOG_DEBUG. There the
amount of repeated context messages just bloat the log without adding
information.
Exposing compression and decompression APIs of pglz makes possible its
use by extensions and contrib modules. pglz_decompress contained a call
to elog to emit an error message in case of corrupted data. This function
is changed to return a status code to let its callers return an error instead.
This commit is required for upcoming WAL compression feature so that
the WAL reader facility can decompress the WAL data by using pglz_decompress.
Michael Paquier
For some reason this seems to have been missed when the lists in
src/timezone/tznames/ were first constructed. We can't put it in Default
because of the conflict with US CST, but we should certainly list it among
the alternative entries in Asia.txt. (I checked for other oversights, but
all the other abbreviations that are in current use according to the IANA
files seem to be accounted for.) Noted while responding to bug #12326.
This reverts commit 1826987a46.
The overall design was deemed unacceptable, in discussion following the
previous commit message; we might find some parts of it still
salvageable, but I don't want to be on the hook for fixing it, so let's
wait until we have a new patch.
This allows access to get_object_address from SQL, which is useful to
obtain OID addressing information from data equivalent to that emitted
by the parser. This is necessary infrastructure of a project to let
replication systems propagate object dropping events to remote servers,
where the schema might be different than the server originating the
DROP.
This patch also adds support for OBJECT_DEFAULT to get_object_address;
that is, it is now possible to refer to a column's default value.
Catalog version bumped due to the new function.
Reviewed by Stephen Frost, Heikki Linnakangas, Robert Haas, Andres
Freund, Abhijit Menon-Sen, Adam Brightwell.
The previous representation using a boolean column for each attribute
would not scale as well as we want to add further attributes.
Extra auxilliary functions are added to go along with this change, to
make up for the lost convenience of access of the old representation.
Catalog version bumped due to change in catalogs and the new functions.
Author: Adam Brightwell, minor tweaks by Álvaro
Reviewed by: Stephen Frost, Andres Freund, Álvaro Herrera
Apart from enabling comments on domain constraints, this enables a
future project to replicate object dropping to remote servers: with the
current mechanism there's no way to distinguish between the two types of
constraints, so there's no way to know what to drop.
Also added support for the domain constraint comments in psql's \dd and
pg_dump.
Catalog version bumped due to the change in ObjectType enum.
This allows it to be used with ALTER ROLE SET.
Although the old setting of PGC_BACKEND prevented changes after session
start, after discussion it was more useful to allow ALTER ROLE SET
instead and just document that changes during a session have no effect.
This is similar to how session_preload_libraries works already.
An alternative would be to change things to allow PGC_BACKEND and
PGC_SU_BACKEND settings to be changed by ALTER ROLE SET. But that might
need further research (e.g., log_connections would probably not work).
based on patch by Kyotaro Horiguchi
This performs slightly better, uses less memory, and needs slightly less
code in GiST, than the Red-Black tree previously used.
Reviewed by Peter Geoghegan
XLogFileInit() returns a file descriptor, which needs to be closed. The leak
was short-lived, since the startup process exits shortly afterwards, but it
was clearly a bug, nevertheless.
Per Coverity report.
Add "normal" and "original" flags as output columns to the
pg_event_trigger_dropped_objects() function. With this it's possible to
distinguish which objects, among those listed, need to be explicitely
referenced when trying to replicate a deletion.
This is necessary so that the list of objects can be pruned to the
minimum necessary to replicate the DROP command in a remote server that
might have slightly different schema (for instance, TOAST tables and
constraints with different names and such.)
Catalog version bumped due to change of function definition.
Reviewed by: Abhijit Menon-Sen, Stephen Frost, Heikki Linnakangas,
Robert Haas.
We used time(null) to set a TimestampTz field, which gave bogus results.
Noticed while looking at pg_xlogdump output.
Backpatch to 9.3 and above, where the fast promotion was introduced.
In LWLockRelease() (and in 9.4+ LWLockUpdateVar()) we release enqueued
waiters using PGSemaphoreUnlock(). As there are other sources of such
unlocks backends only wake up if MyProc->lwWaiting is set to false;
which is only done in the aforementioned functions.
Before this commit there were dangers because the store to lwWaitLink
could become visible before the store to lwWaitLink. This could both
happen due to compiler reordering (on most compilers) and on some
platforms due to the CPU reordering stores.
The possible consequence of this is that a backend stops waiting
before lwWaitLink is set to NULL. If that backend then tries to
acquire another lock and has to wait there the list could become
corrupted once the lwWaitLink store is finally performed.
Add a write memory barrier to prevent that issue.
Unfortunately the barrier support has been only added in 9.2. Given
that the issue has not knowingly been observed in praxis it seems
sufficient to prohibit compiler reordering using volatile for 9.0 and
9.1. Actual problems due to compiler reordering are more likely
anyway.
Discussion: 20140210134625.GA15246@awork2.anarazel.de
Author: Jim Nasby, some kibitzing by Heikki Linnankangas.
Discussion leading to current behavior and precise wording fueled by
thoughts from Robert Haas and Andres Freund.
Previously, if you wanted anything besides C-string hash keys, you had to
specify a custom hashing function to hash_create(). Nearly all such
callers were specifying tag_hash or oid_hash; which is tedious, and rather
error-prone, since a caller could easily miss the opportunity to optimize
by using hash_uint32 when appropriate. Replace this with a design whereby
callers using simple binary-data keys just specify HASH_BLOBS and don't
need to mess with specific support functions. hash_create() itself will
take care of optimizing when the key size is four bytes.
This nets out saving a few hundred bytes of code space, and offers
a measurable performance improvement in tidbitmap.c (which was not
exploiting the opportunity to use hash_uint32 for its 4-byte keys).
There might be some wins elsewhere too, I didn't analyze closely.
In future we could look into offering a similar optimized hashing function
for 8-byte keys. Under this design that could be done in a centralized
and machine-independent fashion, whereas getting it right for keys of
platform-dependent sizes would've been notationally painful before.
For the moment, the old way still works fine, so as not to break source
code compatibility for loadable modules. Eventually we might want to
remove tag_hash and friends from the exported API altogether, since there's
no real need for them to be explicitly referenced from outside dynahash.c.
Teodor Sigaev and Tom Lane
Two changes:
1. When copying a WAL segment from old timeline to create the first segment
on the new timeline, only copy up to the point where the timeline switch
happens, and zero-fill the rest. This avoids corner cases where we might
think that the copied WAL from the previous timeline belong to the new
timeline.
2. If the timeline switch happens at a segment boundary, don't copy the
whole old segment to the new timeline. It's pointless, because it's 100%
identical to the old segment.
st_changecount protocol needs the memory barriers to ensure that
the apparent order of execution is as it desires. Otherwise,
for example, the CPU might rearrange the code so that st_changecount
is incremented twice before the modification on a machine with
weak memory ordering. This surprising result can lead to bugs.
This commit introduces the macros to load and store st_changecount
with the memory barriers. These are called before and after
PgBackendStatus entries are modified or copied into private memory,
in order to prevent CPU from reordering PgBackendStatus access.
Per discussion on pgsql-hackers, we decided not to back-patch this
to 9.4 or before until we get an actual bug report about this.
Patch by me. Review by Robert Haas.
In generate_series_step_numeric(), the variables "start_num"
and "stop_num" may be potentially freed until the next call.
So they should be put in the location which can survive across calls.
But previously they were not, and which could cause incorrect
behavior of generate_series(numeric, numeric). This commit fixes
this problem by copying them on multi_call_memory_ctx.
Andrew Gierth
Back-patch to 9.0 (all supported versions). This is mere
future-proofing in the context of the master branch, but commit
f6dc6dd5ba requires it of older branches.
When starting up from a basebackup taken off a standby extra logic has
to be applied to compute the point where the data directory is
consistent. Normal base backups use a WAL record for that purpose, but
that isn't possible on a standby.
That logic had a error check ensuring that the cluster's control file
indicates being in recovery. Unfortunately that check was too strict,
disregarding the fact that the control file could also indicate that
the cluster was shut down while in recovery.
That's possible when the a cluster starting from a basebackup is shut
down before the backup label has been removed. When everything goes
well that's a short window, but when either restore_command or
primary_conninfo isn't configured correctly the window can get much
wider. That's because inbetween reading and unlinking the label we
restore the last checkpoint from WAL which can need additional WAL.
To fix simply also allow starting when the control file indicates
"shutdown in recovery". There's nicer fixes imaginable, but they'd be
more invasive.
Backpatch to 9.2 where support for taking basebackups from standbys
was added.
Use SSPI authentication to allow connections exclusively from the OS
user that launched the test suite. This closes on Windows the
vulnerability that commit be76a6d39e
closed on other platforms. Users of "make installcheck" or custom test
harnesses can run "pg_regress --config-auth=DATADIR" to activate the
same authentication configuration that "make check" would use.
Back-patch to 9.0 (all supported versions).
Security: CVE-2014-0067
As with NOT NULL constraints, we consider that such constraints are merely
reports of constraints that are being enforced by the remote server (or
other underlying storage mechanism). Their only real use is to allow
planner optimizations, for example in constraint-exclusion checks. Thus,
the code changes here amount to little more than removal of the error that
was formerly thrown for applying CHECK to a foreign table.
(In passing, do a bit of cleanup of the ALTER FOREIGN TABLE reference page,
which had accumulated some weird decisions about ordering etc.)
Shigeru Hanada and Etsuro Fujita, reviewed by Kyotaro Horiguchi and
Ashutosh Bapat.
The old pattern would match files with strange extensions like *.ry or
*.lpp. Refactor it to only include files with known extensions, and to make
it more readable.
Per Andrew Dunstan's suggestion.
MapArrayTypeName would copy up to NAMEDATALEN-1 bytes of the base type
name, which of course is wrong: after prepending '_' there is only room for
NAMEDATALEN-2 bytes. Aside from being the wrong result, this case would
lead to overrunning the statically allocated work buffer. This would be a
security bug if the function were ever used outside bootstrap mode, but it
isn't, at least not in any currently supported branches.
Aside from fixing the off-by-one loop logic, this patch gets rid of the
static work buffer by having MapArrayTypeName pstrdup its result; the sole
caller was already doing that, so this just requires moving the pstrdup
call. This saves a few bytes but mainly it makes the API a lot cleaner.
Back-patch on the off chance that there is some third-party code using
MapArrayTypeName with less-secure input. Pushing pstrdup into the function
should not cause any serious problems for such hypothetical code; at worst
there might be a short term memory leak.
Per Coverity scanning.
Mostly these issues concern the non-use of function results. These
have been changed to use (void) pushJsonbValue(...) instead of assigning
the result to a variable that gets overwritten before it is used.
There is a larger issue that we should possibly examine the API for
pushJsonbValue(), so that instead of returning a value it modifies a
state argument. The current idiom is rather clumsy. However, changing
that requires quite a bit more work, so this change should do for the
moment.
The code for advancing through the input rows overlooked the case that we
might already be past the first row of the row pair now being considered,
in case the previous percentile also fell between the same two input rows.
Report and patch by Andrew Gierth; logic rewritten a bit for clarity by me.
The planner seems to like to do this join query as a hash join, making
the output ordering machine-dependent; worse, it's a hash on OIDs, so
that it's a bit astonishing that the result doesn't change from run to
run even on one machine. Add an ORDER BY to get consistent results.
Per buildfarm.
I also suppressed output from the final DROP SCHEMA CASCADE, to avoid
occasional failures similar to those fixed in commit 81d815dc3e.
That hasn't been observed in the buildfarm yet, but it seems likely
to happen in future if we leave it as-is.
The functions are:
to_jsonb()
jsonb_object()
jsonb_build_object()
jsonb_build_array()
jsonb_agg()
jsonb_object_agg()
Also along the way some better logic is implemented in
json_categorize_type() to match that in the newly implemented
jsonb_categorize_type().
Andrew Dunstan, reviewed by Pavel Stehule and Alvaro Herrera.
The functions remove object fields, including in nested objects, that
have null as a value. In certain cases this can lead to considerably
smaller datums, with no loss of semantic information.
Andrew Dunstan, reviewed by Pavel Stehule.
Ordinarily we can omit checking of a WHERE condition that matches a partial
index's condition, when we are using an indexscan on that partial index.
However, in SELECT FOR UPDATE we must include the "redundant" filter
condition in the plan so that it gets checked properly in an EvalPlanQual
recheck. The planner got this mostly right, but improperly omitted the
filter condition if the index in question was on an inheritance child
table. In READ COMMITTED mode, this could result in incorrectly returning
just-updated rows that no longer satisfy the filter condition.
The cause of the error is using get_parse_rowmark() when get_plan_rowmark()
is what should be used during planning. In 9.3 and up, also fix the same
mistake in contrib/postgres_fdw. It's currently harmless there (for lack
of inheritance support) but wrong is wrong, and the incorrect code might
get copied to someplace where it's more significant.
Report and fix by Kyotaro Horiguchi. Back-patch to all supported branches.
In READ COMMITTED mode, if a SELECT FOR UPDATE discovers it has to redo
WHERE-clause checking on rows that have been updated since the SELECT's
snapshot, it invokes EvalPlanQual processing to do that. If this first
occurs within a non-first child table of an inheritance tree, the previous
coding could accidentally re-return a matching row from an earlier,
already-scanned child table. (And, to add insult to injury, I think this
could make it miss returning a row that should have been returned, if the
updated row that this happens on should still have passed the WHERE qual.)
Per report from Kyotaro Horiguchi; the added isolation test is based on his
test case.
This has been broken for quite awhile, so back-patch to all supported
branches.
Ensure we reindex indexes built on Mat Views.
Based on patch from Micheal Paquier
Add thorough tests to check that indexes on
tables, toast tables and mat views are reindexed.
Simon Riggs
Aside from not testing the case it claimed to test (namely a permissions
failure), it left a login-capable role lying around, which quite aside
from possibly being a security hole would cause subsequent regression runs
to fail since the role would already exist.
In passing, also make some debugging elog's in pgstat.c a bit more
consistently worded.
Back-patch as far as applicable (9.3 or 9.4; none of these mistakes are
really old).
Mark Dilger identified and patched the type violations; the message
rewordings are mine.
The amount of space to reserve for the value's varlena header is
VARHDRSZ, not sizeof(VARHDRSZ). The latter coding accidentally
failed to fail because of the way the VARHDRSZ macro is currently
defined; but if we ever change it to return size_t (as one might
reasonably expect it to do), convertToJsonb() would have failed.
Spotted by Mark Dilger.
It's not run by the global "check" or "installcheck" targets, because the
temporary installation it creates accepts TCP connections from any user
the same host, which is insecure.
Previously REINDEX DATABASE and REINDEX SCHEMA
produced a stream of NOTICE messages. Removing that
since it is inconsistent for such a command to
produce output without a VERBOSE option.
PostgreSQL on Windows 8 or Windows Server 2012 will now
get high-resolution timestamps by dynamically loading the
GetSystemTimePreciseAsFileTime function. It'll fall back to
to GetSystemTimeAsFileTime if the higher precision variant
isn't found, so the same binaries without problems on older
Windows releases.
No attempt is made to detect the Windows version. Only the
presence or absence of the desired function is considered.
Craig Ringer
PostgreSQL was calling GetSystemTime followed by SystemTimeToFileTime in the
win32 port gettimeofday function. This is not necessary and limits the reported
precision to the 1ms granularity that the SYSTEMTIME struct can represent. By
using GetSystemTimeAsFileTime we avoid unnecessary conversions and capture
timestamps at 100ns granularity, which is then rounded to 1µs granularity for
storage in a PostgreSQL timestamp.
On most Windows systems this change will actually have no significant effect on
timestamp resolution as the system timer tick is typically between 1ms and 15ms
depending on what timer resolution currently running applications have
requested. You can check this with clockres.exe from sysinternals. Despite the
platform limiation this change still permits capture of finer timestamps where
the system is capable of producing them and it gets rid of an unnecessary
syscall.
The higher resolution GetSystemTimePreciseAsFileTime call available on Windows
8 and Windows Server 2012 has the same interface as GetSystemTimeAsFileTime, so
switching to GetSystemTimeAsFileTime makes it easier to use the Precise variant
later.
Craig Ringer, reviewed by David Rowley
Generate a table_rewrite event when ALTER TABLE
attempts to rewrite a table. Provide helper
functions to identify table and reason.
Intended use case is to help assess or to react
to schema changes that might hold exclusive locks
for long periods.
Dimitri Fontaine, triggering an edit by Simon Riggs
Reviewed in detail by Michael Paquier
Rename parameter action_at_recovery_target to
recovery_target_action suggested by Christoph Berg.
Place into recovery.conf suggested by Fujii Masao,
replacing (deprecating) earlier parameters, per
Michael Paquier.
Used to say just "could not read password from file "...": Success", which
isn't very informative.
Mats Erik Andersson. Backpatch to all supported versions.
The "file mode" bits in the tar file header is not supposed to include the
file type bits, e.g. S_IFREG or S_IFDIR. The file type is stored in a
separate field. This isn't a problem in practice, all tar programs ignore
the extra bits, but let's be tidy.
This came up in a discussion around bug #11949, reported by Hendrik Grewe,
although this doesn't fix the issue with tar --append. That turned out to be
a bug in GNU tar. Schilly's tartest program revealed this defect in the tar
created by pg_basebackup.
This problem goes as far as we we've had pg_basebackup, but since this
hasn't caused any problems in practice, let's be conservative and fix in
master only.
It was an oversight in the original commit.
Also note in the sample config file that changing wal_log_hints requires a
restart.
Michael Paquier. Backpatch to 9.4, where wal_log_hints was added.
PGXS computes srcdir from VPATH, PostgreSQL proper computes VPATH from
srcdir, and doing both results in an error from make. Conditionalize so
only one of these takes effect.
These changes were originally submitted as "adds support for VPATH with
USE_PGXS", but they are not necessary for VPATH support, so they just
add more lines of code for no reason.
dblink and postgres_fdw use SHLIB_PREREQS = submake-libpq to build libpq
first. This doesn't work in a PGXS build, because there is no libpq to
build. So just omit setting SHLIB_PREREQS in this case.
Note that PGXS users can still use SHLIB_PREREQS (although it is not
documented). The problem here is only that contrib modules can be built
in-tree or using PGXS, and the prerequisite is only applicable in the
former case.
Commit 6697aa2bc2 previously attempted to
address this by creating a somewhat fake submake-libpq target in
Makefile.global. That was not the right fix, and it was also done in a
nonportable way, so revert that.
Since this is not something that a user should change,
pg_config_manual.h was an inappropriate place for it.
In initdb.c, remove the use of the macro, because utils/guc.h can't be
included by non-backend code. But we hardcode all the other
configuration file names there, so this isn't a disaster.
Transactions can now set their commit timestamp directly as they commit,
or an external transaction commit timestamp can be fed from an outside
system using the new function TransactionTreeSetCommitTsData(). This
data is crash-safe, and truncated at Xid freeze point, same as pg_clog.
This module is disabled by default because it causes a performance hit,
but can be enabled in postgresql.conf requiring only a server restart.
A new test in src/test/modules is included.
Catalog version bumped due to the new subdirectory within PGDATA and a
couple of new SQL functions.
Authors: Álvaro Herrera and Petr Jelínek
Reviewed to varying degrees by Michael Paquier, Andres Freund, Robert
Haas, Amit Kapila, Fujii Masao, Jaime Casanova, Simon Riggs, Steven
Singer, Peter Eisentraut
check-world failed in a completely clean tree, because src/test/modules
fail to build unless errcodes.h is generated first. To fix this,
install a dependency in src/test/modules' Makefile so that the necessary
file is generated. Even with this, running "make check" within
individual module subdirs will still fail because the dependency is not
considered there, but this case is less interesting and would be messier
to fix.
check-world still failed with the above fix in place, this time because
dummy_seclabel used LOAD to load the dynamic library, which doesn't work
because the @libdir@ (expanded by the makefile) is expanded to the final
install path, not the temporary installation directory used by make
check. To fix, tweak things so that CREATE EXTENSION can be used
instead, which solves the problem because the library path is expanded
by the backend, which is aware of the true libdir.
Make the error messages issued by array_in() uniformly follow the style
ERROR: malformed array literal: "actual input string"
DETAIL: specific complaint here
and rewrite many of the specific complaints to be clearer.
The immediate motivation for doing this is a complaint from Josh Berkus
that json_to_record() produced an unintelligible error message when
dealing with an array item, because it tries to feed the JSON-format
array value to array_in(). Really it ought to be smart enough to
perform JSON-to-Postgres array conversion, but that's a future feature
not a bug fix. In the meantime, this change is something we agreed
we could back-patch into 9.4, and it should help de-confuse things a bit.
The logical decoding patchset introduced PROC_IN_LOGICAL_DECODING flag
PGXACT flag, that allows such backends to be skipped when computing
the xmin horizon/snapshots. That's fine and sensible for walsenders
streaming out logical changes, but not at all fine for SQL backends
doing logical decoding. If the latter set that flag any change they
have performed outside of logical decoding will not be regarded as
visible - which e.g. can lead to that change being vacuumed away.
Note that not setting the flag for SQL backends isn't particularly
bothersome - the SQL backend doesn't do streaming, so it only runs for
a limited amount of time.
Per buildfarm member 'tick' and Alvaro.
Backpatch to 9.4, where logical decoding was introduced.
Davide S. reported that json_agg() sometimes produced multiple trailing
right brackets. This turns out to be because json_agg_finalfn() attaches
the final right bracket, and was doing so by modifying the aggregate state
in-place. That's verboten, though unfortunately it seems there's no way
for nodeAgg.c to check for such mistakes.
Fix that back to 9.3 where the broken code was introduced. In 9.4 and
HEAD, likewise fix json_object_agg(), which had copied the erroneous logic.
Make some cosmetic cleanups as well.
Get rid of PG_FUNCTION_INFO_V1() macros, which are quite inappropriate
for built-in functions (possibly leftovers from testing as a loadable
module?). Also, fix gratuitous inconsistency between SQL-level and
C-level names of the minmax support functions.
We were not checking to see if the supplied dscale was valid for the given
digit array when receiving binary-format numeric values. While dscale can
validly be more than the number of nonzero fractional digits, it shouldn't
be less; that case causes fractional digits to be hidden on display even
though they're there and participate in arithmetic.
Bug #12053 from Tommaso Sala indicates that there's at least one broken
client library out there that sometimes supplies an incorrect dscale value,
leading to strange behavior. This suggests that simply throwing an error
might not be the best response; it would lead to failures in applications
that might seem to be working fine today. What seems the least risky fix
is to truncate away any digits that would be hidden by dscale. This
preserves the existing behavior in terms of what will be printed for the
transmitted value, while preventing subsequent arithmetic from producing
results inconsistent with that.
In passing, throw a specific error for the case of dscale being outside
the range that will fit into a numeric's header. Before you got "value
overflows numeric format", which is a bit misleading.
Back-patch to all supported branches.
Rather than have the core security_label regression test depend on the
dummy_seclabel module, have that part of the test be executed by
dummy_seclabel itself directly. This simplifies the testing rig a bit;
in particular it should silence the problems from the MSVC buildfarm
phylum, which haven't yet gotten taught how to install src/test/modules.
We expose a function IsValidJsonNumber that internally calls the lexer
for json numbers. That allows us to use the same test everywhere,
instead of inventing a broken test for hstore conversions. The new
function is also used in datum_to_json, replacing the code that is now
moved to the new function.
Backpatch to 9.3 where hstore_to_json_loose was introduced.
Extracted from pending inet selectivity patch. The rest of it isn't
quite ready to commit, but we might as well push this part so the patch
doesn't have to track the moving target of pg_operator.h.
Coverity complained that the "else" added to fillPGconn() was unreachable,
which it was. Remove the dead code. In passing, rearrange the tests so as
not to bother trying to fetch values for options that can't be assigned.
Pre-9.3 did not have that issue, but it did have a "return" that should be
"goto oom_error" to ensure that a suitable error message gets filled in.
This is advance preparation for introducing even more test modules; the
easy solution is to add them to contrib, but that's bloated enough that
it seems a good time to think of something different.
Moved modules are dummy_seclabel, test_shm_mq, test_parser and
worker_spi.
(test_decoding was also a candidate, but there was too much opposition
to moving that one. We can always reconsider later.)
Apart from ignoring "hostaddr" set to the empty string, this behaves
identically to its predecessor. Back-patch to 9.4, where the original
commit first appeared.
Reviewed by Fujii Masao.
This reverts commit 9f80f4835a. The
function returned the raw value of a connection parameter, a task served
by PQconninfo(). The next commit will reimplement the psql \conninfo
change that way. Back-patch to 9.4, where that commit first appeared.
The original definitions were leaving no room for cross-type operators,
so queries that compared a column of one type against something of a
different type were not taking advantage of the index. Fix by making
the opfamilies more like the ones for Btree, and include a few
cross-type operator classes.
Catalog version bumped.
Per complaints from Hubert Lubaczewski, Mark Wong, Heikki Linnakangas.
This patch adds a function that replaces a bms_membership() test followed
by a bms_singleton_member() call, performing both the test and the
extraction of a singleton set's member in one scan of the bitmapset.
The performance advantage over the old way is probably minimal in current
usage, but it seems worthwhile on notational grounds anyway.
David Rowley
This patch adds a way of iterating through the members of a bitmapset
nondestructively, unlike the old way with bms_first_member(). While
bms_next_member() is very slightly slower than bms_first_member()
(at least for typical-size bitmapsets), eliminating the need to palloc
and pfree a temporary copy of the target bitmapset is a significant win.
So this method should be preferred in all cases where a temporary copy
would be necessary.
Tom Lane, with suggestions from Dean Rasheed and David Rowley
This function was initially coded on the assumption that it would not be
performance-critical, but that turns out to be wrong in workloads that
are heavily dependent on the speed of plpgsql functions. Speed it up by
hard-coding the comparison rules, thereby avoiding palloc/pfree traffic
from creating and immediately freeing an OverrideSearchPath object.
Per report from Scott Marlowe.
Previously, if the typcache had for example tried and failed to find a hash
opclass for a given data type, it would nonetheless repeat the unsuccessful
catalog lookup each time it was asked again. This can lead to a
significant amount of useless bufmgr traffic, as in a recent report from
Scott Marlowe. Like the catalog caches, typcache should be able to cache
negative results. This patch arranges that by making use of separate flag
bits to remember whether a particular item has been looked up, rather than
treating a zero OID as an indicator that no lookup has been done.
Also, install a credible invalidation mechanism, namely watching for inval
events in pg_opclass. The sole advantage of the lack of negative caching
was that the code would cope if operators or opclasses got added for a type
mid-session; to preserve that behavior we have to be able to invalidate
stale lookup results. Updates in pg_opclass should be pretty rare in
production systems, so it seems sufficient to just invalidate all the
dependent data whenever one happens.
Adding proper invalidation also means that this code will now react sanely
if an opclass is dropped mid-session. Arguably, that's a back-patchable
bug fix, but in view of the lack of complaints from the field I'll refrain
from back-patching. (Probably, in most cases where an opclass is dropped,
the data type itself is dropped soon after, so that this misfeasance has
no bad consequences.)
InitXLogInsert() cannot be called in a critical section, because it
allocates memory. But CreateCheckPoint() did that, when called for the
end-of-recovery checkpoint by the startup process.
In the passing, fix the scratch space allocation in InitXLogInsert to go to
the right memory context. Also update the comment at InitXLOGAccess, which
hasn't been totally accurate since hot standby was introduced (in a hot
standby backend, InitXLOGAccess isn't called at backend startup).
Reported by Michael Paquier
Previously \watch always ignored the user's \pset null setting.
\pset null setting should be ignored for \d and similar queries.
For those, the code can reasonably have an opinion about what
the presentation should be like, since it knows what SQL query
it's issuing. This argument surely doesn't apply to \watch,
so this commit makes \watch use the user's \pset null setting.
Back-patch to 9.3 where \watch was added.
As pointed out by Robert, we should really have named pg_rowsecurity
pg_policy, as the objects stored in that catalog are policies. This
patch fixes that and updates the column names to start with 'pol' to
match the new catalog name.
The security consideration for COPY with row level security, also
pointed out by Robert, has also been addressed by remembering and
re-checking the OID of the relation initially referenced during COPY
processing, to make sure it hasn't changed under us by the time we
finish planning out the query which has been built.
Robert and Alvaro also commented on missing OCLASS and OBJECT entries
for POLICY (formerly ROWSECURITY or POLICY, depending) in various
places. This patch fixes that too, which also happens to add the
ability to COMMENT on policies.
In passing, attempt to improve the consistency of messages, comments,
and documentation as well. This removes various incarnations of
'row-security', 'row-level security', 'Row-security', etc, in favor
of 'policy', 'row level security' or 'row_security' as appropriate.
Happy Thanksgiving!
In passing, add an Assert defending the presumption that bytes_left
is positive to start with. (I'm not exactly convinced that using an
unsigned type was such a bright thing here, but let's at least do
this much.)
Add a bit of context sensitivity to plpgsql_yylex() so that it can
recognize when the word it is looking at is the first word of a new
statement, and if so whether it is the target of an assignment statement.
When we are at start of statement and it's not an assignment, we can
prefer recognizing unreserved keywords over recognizing variable names,
thereby allowing most statements' initial keywords to be demoted from
reserved to unreserved status. This is rather useful already (there are
15 such words that get demoted here), and what's more to the point is
that future patches proposing to add new plpgsql statements can avoid
objections about having to add new reserved words.
The keywords BEGIN, DECLARE, FOR, FOREACH, LOOP, WHILE need to remain
reserved because they can be preceded by block labels, and the logic
added here doesn't understand about block labels. In principle we
could probably fix that, but it would take more than one token of
lookback and the benefit doesn't seem worth extra complexity.
Also note I didn't de-reserve EXECUTE, because it is used in more places
than just statement start. It's possible it could be de-reserved with
more work, but that would be an independent fix.
In passing, also de-reserve COLLATE and DEFAULT, which shouldn't have
been reserved in the first place since they only need to be recognized
within DECLARE sections.
These cases formerly failed with errors about "could not find array type
for data type". Now they yield arrays of the same element type and one
higher dimension.
The implementation involves creating functions with API similar to the
existing accumArrayResult() family. I (tgl) also extended the base family
by adding an initArrayResult() function, which allows callers to avoid
special-casing the zero-inputs case if they just want an empty array as
result. (Not all do, so the previous calling convention remains valid.)
This allowed simplifying some existing code in xml.c and plperl.c.
Ali Akbar, reviewed by Pavel Stehule, significantly modified by me
Per discussion with Tom and Andrew, 64bit integers are no longer a
problem for the catalogs, so go ahead and add the mapping from the C
int64 type to the int8 SQL identification to allow using them.
Patch by Adam Brightwell
The old method of appending options to the connection string didn't work if
the primary_conninfo was a postgres:// style URI, instead of a traditional
connection string. Use PQconnectdbParams instead.
Alex Shulgin
If the "dbname" attribute in PQconnectDBParams contained a connection string
or URI (and expand_dbname = TRUE), the database name from the connection
string could not be overridden by a subsequent "dbname" keyword in the
array. That was not intentional; all other options can be overridden.
Furthermore, any subsequent "dbname" caused the connection string from the
first dbname value to be processed again, overriding any values for the same
options that were given between the connection string and the second dbname
option.
In the passing, clarify in the docs that only the first dbname option in the
array is parsed as a connection string.
Alex Shulgin. Backpatch to all supported versions.
In the regression tests, when doing cascaded drops, we need to suppress
the notices from DROP CASCADE or there can be transient regression
failures as the order of drops can depend on the physical row order in
pg_depend.
Report and fix suggestion from Tom.
An out-of-memory in most of these would lead to strange behavior, like
connecting to a different database than intended, but some would lead to
an outright segfault.
Alex Shulgin and me. Backpatch to all supported versions.
Code that check the flag no longer need #ifdef's, which is more convenient.
In particular, makes it easier to write extensions that depend on it.
In the passing, modify sslinfo's ssl_is_used function to check ssl_in_use
instead of the OpenSSL specific 'ssl' pointer. It doesn't make any
difference currently, as sslinfo is only compiled when built with OpenSSL,
but seems cleaner anyway.
This gives an overview of what Lehman & Yao's paper is all about, so that
you can understand the rest of the README without having to read the paper.
Per discussion with Peter Geoghegan and others.
Add a new XLOG_FPI_FOR_HINT record type, and use that for full-page images
generated for hint bit updates, when checksums are enabled. The new record
type is replayed exactly the same as XLOG_FPI, but allows them to be tallied
separately e.g. in pg_xlogdump.
There may once have been a reason for the intermediate proc_stmts
production in the plpgsql grammar, but it isn't doing anything useful
anymore, so let's collapse it into proc_sect. Saves some code and
probably a small number of nanoseconds per statement list.
In passing, correctly alphabetize keyword lists to match pl_scanner.c;
note that for "rowtype" vs "row_count", pl_scanner.c must sort on the
basis of the lower-case spelling.
Noted while fooling with a patch to de-reserve more plpgsql keywords.
The locution "EXISTS(SELECT ... LIMIT 1)" seems to be rather common among
people who don't realize that the database already performs optimizations
equivalent to putting LIMIT 1 in the sub-select. Unfortunately, this was
actually making things worse, because it prevented us from optimizing such
EXISTS clauses into semi or anti joins. Teach simplify_EXISTS_query() to
suppress constant-positive LIMIT clauses. That fixes the semi/anti-join
case, and may help marginally even for cases that have to be left as
sub-SELECTs.
Marti Raudsepp, reviewed by David Rowley
postgres_fdw would send query conditions involving system columns to the
remote server, even though it makes no effort to ensure that system
columns other than CTID match what the remote side thinks. tableoid,
in particular, probably won't match and might have some use in queries.
Hence, prevent sending conditions that include non-CTID system columns.
Also, create_foreignscan_plan neglected to check local restriction
conditions while determining whether to set fsSystemCol for a foreign
scan plan node. This again would bollix the results for queries that
test a foreign table's tableoid.
Back-patch the first fix to 9.3 where postgres_fdw was introduced.
Back-patch the second to 9.2. The code is probably broken in 9.1 as
well, but the patch doesn't apply cleanly there; given the weak state
of support for FDWs in 9.1, it doesn't seem worth fixing.
Etsuro Fujita, reviewed by Ashutosh Bapat, and somewhat modified by me
PSQLexec's error reporting turns out to be too verbose for this case, so
revert to using PQexec instead with minimal error reporting. Prior to
calling PQexec, we call a function that mimics just the echo_hidden
piece of PSQLexec.
Make it work more like FDW plans do: instead of assuming that there are
expressions in a CustomScan plan node that the core code doesn't know
about, insist that all subexpressions that need planner attention be in
a "custom_exprs" list in the Plan representation. (Of course, the
custom plugin can break the list apart again at executor initialization.)
This lets us revert the parts of the patch that exposed setrefs.c and
subselect.c processing to the outside world.
Also revert the GetSpecialCustomVar stuff in ruleutils.c; that concept
may work in future, but it's far from fully baked right now.
Instead of register_custom_path_provider and a CreateCustomScanPath
callback, let's just provide a standard function hook in set_rel_pathlist.
This is more flexible than what was previously committed, is more like the
usual conventions for planner hooks, and requires less support code in the
core. We had discussed this design (including centralizing the
set_cheapest() calls) back in March or so, so I'm not sure why it wasn't
done like this already.
This error counted the first line of a cell as "extra". The effect was
to cause far too frequent invocation of the pager. In most cases this
can be worked around (for example, by using the "less" pager with the -F
flag), so don't backpatch.
These commands were calling the database direct rather than calling
PSQLexec like other slash commands that needed database data.
The code is also changed not to pass the connection as a parameter to
the helper functions. It's available in a global variable, and that's
what PSQLexec uses.
There seems no prospect that any of this will ever be useful, and indeed
it's questionable whether some of it would work if it ever got called;
it's certainly not been exercised in a very long time, if ever. So let's
get rid of it, and make the comments about mark/restore in execAmi.c less
wishy-washy.
The mark/restore support for Result nodes is also currently dead code,
but that's due to planner limitations not because it's impossible that
it could be useful. So I left it in.
Get rid of the pernicious entanglement between planner and executor headers
introduced by commit 0b03e5951b.
Also, rearrange the CustomFoo struct/typedef definitions so that all the
typedef names are seen as used by the compiler. Without this pgindent
will mess things up a bit, which is not so important perhaps, but it also
removes a bizarre discrepancy between the declaration arrangement used for
CustomExecMethods and that used for CustomScanMethods and
CustomPathMethods.
Clean up the commentary around ExecSupportsMarkRestore to reflect the
rather large change in its API.
Const-ify register_custom_path_provider's argument. This necessitates
casting away const in the function, but that seems better than forcing
callers of the function to do so (or else not const-ify their method
pointer structs, which was sort of the whole point).
De-export fix_expr_common. I don't like the exporting of fix_scan_expr
or replace_nestloop_params either, but this one surely has got little
excuse.
execCurrent.c's search_plan_tree() must recognize a CustomScan on the
target relation. This would only be helpful for custom providers that
support CurrentOfExpr quals, which is probably a bit far-fetched, but
it's not impossible I think. But even without assuming that, we need
to recognize a scanned-relation match so that we will properly throw
error if the desired relation is being scanned with both a CustomScan
and a regular scan (ie, self-join).
Also recognize ForeignScanState for similar reasons. Supporting WHERE
CURRENT OF on a foreign table is probably even more far-fetched than
it is for custom scans, but I think in principle you could do it with
postgres_fdw (or another FDW that supports the ctid column). This
would be a back-patchable bug fix if existing FDWs handled CurrentOfExpr,
but I doubt any do so I won't bother back-patching.
Now that we have a policy of hiding varlena catalog fields behind
"#ifdef CATALOG_VARLEN", there is no need for their type names to be
acceptable to the C compiler. And experimentation shows that it does
not matter to pgindent either. (If it did, we'd have problems anyway,
since these typedefs are unreferenced so far as the C compiler is
concerned, and find_typedef fails to identify such typedefs.)
Hence, remove the phony typedefs that genbki.h provided to make
some varlena field definitions compilable.
In passing, rearrange #define's into what seemed a more logical order.
It's a false positive - the variable is only used when 'onleft' is true,
and it is initialized in that case. But the compiler doesn't necessarily
see that.
Each WAL record now carries information about the modified relation and
block(s) in a standardized format. That makes it easier to write tools that
need that information, like pg_rewind, prefetching the blocks to speed up
recovery, etc.
There's a whole new API for building WAL records, replacing the XLogRecData
chains used previously. The new API consists of XLogRegister* functions,
which are called for each buffer and chunk of data that is added to the
record. The new API also gives more control over when a full-page image is
written, by passing flags to the XLogRegisterBuffer function.
This also simplifies the XLogReadBufferForRedo() calls. The function can dig
the relation and block number from the WAL record, so they no longer need to
be passed as arguments.
For the convenience of redo routines, XLogReader now disects each WAL record
after reading it, copying the main data part and the per-block data into
MAXALIGNed buffers. The data chunks are not aligned within the WAL record,
but the redo routines can assume that the pointers returned by XLogRecGet*
functions are. Redo routines are now passed the XLogReaderState, which
contains the record in the already-disected format, instead of the plain
XLogRecord.
The new record format also makes the fixed size XLogRecord header smaller,
by removing the xl_len field. The length of the "main data" portion is now
stored at the end of the WAL record, and there's a separate header after
XLogRecord for it. The alignment padding at the end of XLogRecord is also
removed. This compansates for the fact that the new format would otherwise
be more bulky than the old format.
Reviewed by Andres Freund, Amit Kapila, Michael Paquier, Alvaro Herrera,
Fujii Masao.
Custom rules must come after pgxs inclusion, not before, because any
rule added before pgxs will break the default 'all' target.
Author: Cédric Villemain <cedric@2ndquadrant.fr>
That includes VACUUM on GIN, GiST and SP-GiST indexes, and B-tree indexes
large enough to cause page deletions in B-tree. Plus some other special
cases.
After this patch, the regression tests generate all different WAL record
types. Not all branches within the redo functions are covered, but it's a
step forward.
In pg_receivexlog, in order to check whether the current WAL file is
being opened or not, its file descriptor has to be checked against -1
as an invalid value. But, oops, 7900e94 added the incorrect test
checking the descriptor against 1. This commit fixes that bug.
Back-patch to 9.4 where the bug was added.
Spotted by Magnus Hagander
When pg_receivexlog --slot is connecting to the server, at the shutdown
of the server, walsender keeps waiting for the last WAL record to be
replicated and flushed in pg_receivexlog. But previously pg_receivexlog
issued sync command only when WAL file was switched. So there was
the case where the last WAL was never flushed and walsender had to
keep waiting infinitely. This caused the server shutdown to get stuck.
pg_recvlogical handles this problem by calling fsync() when it receives
the request of immediate reply from the server. That is, at shutdown,
walsender sends the request, pg_recvlogical receives it, flushes the last
WAL record, and sends the flush location back to the server. Since
walsender can see that the last WAL record is successfully flushed, it can
exit cleanly.
This commit introduces the same logic as pg_recvlogical has,
to pg_receivexlog.
Back-patch to 9.4 where pg_receivexlog was changed so that it can use
the replication slot.
Original patch by Michael Paquier, rewritten by me.
Bug report by Furuya Osamu.
The regression test cases added in commits b2cbced9e et al depended in part
on the Russian timezone offset changes of Oct 2014. While this is of no
particular concern for a default Postgres build, it was possible for a
build using --with-system-tzdata to fail the tests if the system tzdata
database wasn't au courant. Bjorn Munch and Christoph Berg both complained
about this while packaging 9.4rc1, so we probably shouldn't insist on the
system tzdata being up-to-date. Instead, make an equivalent test using a
zone change that occurred in Venezuela in 2007. With this patch, the
regression tests should pass using any tzdata set from 2012 or later.
(I can't muster much sympathy for somebody using --with-system-tzdata
on a machine whose system tzdata is more than three years out-of-date.)
These comments don't seem to have been touched in a long time. Make them
describe the current implementation rather than what was here last century,
and be a bit more explicit about the unreferenced-typedefs issue.
pg_dump/parallel.c was using realloc() directly with no error check.
While the odds of an actual failure here seem pretty low, Coverity
complains about it, so fix by using pg_realloc() instead.
While looking for other instances, I noticed a couple of places in
psql that hadn't gotten the memo about the availability of pg_realloc.
These aren't bugs, since they did have error checks, but verbosely
inconsistent code is not a good thing.
Back-patch as far as 9.3. 9.2 did not have pg_dump/parallel.c, nor
did it have pg_realloc available in all frontend code.
For <, <=, > and >= strategies, mark the first scan key
as already matched if scanning in an appropriate direction.
If index tuple contains no nulls we can skip the first
re-check for each tuple.
Author: Rajeev Rastogi
Reviewer: Haribabu Kommi
Rework of the code and comments by Simon Riggs
Allows pg_dump to use a snapshot previously defined by a concurrent
session that has either used pg_export_snapshot() or obtained a
snapshot when creating a logical slot. When this option is used with
parallel pg_dump, the snapshot defined by this option is used and no
new snapshot is taken.
Simon Riggs and Michael Paquier
Previously pg_receivexlog flushed WAL data only when WAL file was switched.
Then 3dad73e added -F option to pg_receivexlog so that users could control
how frequently sync commands were issued to WAL files. It also allowed users
to make pg_receivexlog flush WAL data immediately after writing by
specifying 0 in -F option. However feedback messages were not sent back
immediately even after a flush location was updated. So even if WAL data
was flushed in real time, the server could not see that for a while.
This commit removes -F option from and adds --synchronous to pg_receivexlog.
If --synchronous is specified, like the standby's wal receiver, pg_receivexlog
flushes WAL data as soon as there is WAL data which has not been flushed yet.
Then it sends back the feedback message identifying the latest flush location
to the server. This option is useful to make pg_receivexlog behave as sync
standby by using replication slot, for example.
Original patch by Furuya Osamu, heavily rewritten by me.
Reviewed by Heikki Linnakangas, Alvaro Herrera and Sawada Masahiko.
DST law changes in the Turks & Caicos Islands (America/Grand_Turk) and
in Fiji. New zone Pacific/Bougainville for portions of Papua New Guinea.
Historical changes for Korea and Vietnam.
There was some confusion on how to record the case that the operation
unlinks the last non-leaf page in the branch being deleted.
_bt_unlink_halfdead_page set the "topdead" field in the WAL record to
the leaf page, but the redo routine assumed that it would be an invalid
block number in that case. This commit fixes _bt_unlink_halfdead_page to
do what the redo routine expected.
This code is new in 9.4, so backpatch there.
Buildfarm members with CLOBBER_CACHE_ALWAYS advised us that commit
85b506bbfc was mistaken in setting the relpersistence value of the
index directly in the relcache entry, within reindex_index. The reason
for the failure is that an invalidation message that comes after mucking
with the relcache entry directly, but before writing it to the catalogs,
would cause the entry to become rebuilt in place from catalogs with the
old contents, losing the update.
Fix by passing the correct persistence value to
RelationSetNewRelfilenode instead; this routine also writes the updated
tuple to pg_class, avoiding the problem. Suggested by Tom Lane.
When checking a table that has an inheritance tree marked,
if no child tables remain, we skip ANALYZE. This patch emits
a message to show that the action has been skipped.
Author: Etsuro Fujita
Reviewer: Furuya Osamu
This removes ATChangeIndexesPersistence() introduced by f41872d0c1
which was too ugly to live for long. Instead, the correct persistence
marking is passed all the way down to reindex_index, so that the
transient relation built to contain the index relfilenode can
get marked correctly right from the start.
Author: Fabrízio de Royes Mello
Review and editorialization by Michael Paquier
and Álvaro Herrera
630cd14426 added initdb --sync-only, for use by pg_upgrade, by just
exposing the existing fsync code. That's wrong, because initdb so far
had absolutely no reason to deal with tablespaces.
Fix --sync-only by additionally explicitly syncing each of the
tablespaces.
Backpatch to 9.3 where --sync-only was introduced.
Abhijit Menon-Sen and Andres Freund
Unlogged relations are only reset when performing a unclean
restart. That means they have to be synced to disk during clean
shutdowns. During normal processing that's achieved by registering a
buffer's file to be fsynced at the next checkpoint when flushed. But
ResetUnloggedRelations() doesn't go through the buffer manager, so
nothing will force reset relations to disk before the next shutdown
checkpoint.
So just make ResetUnloggedRelations() fsync the newly created main
forks to disk.
Discussion: 20140912112246.GA4984@alap3.anarazel.de
Backpatch to 9.1 where unlogged tables were introduced.
Abhijit Menon-Sen and Andres Freund
Unlogged relations are reset at the end of crash recovery as they're
only synced to disk during a proper shutdown. Unfortunately that and
later steps can fail, e.g. due to running out of space. This reset
was, up to now performed after marking the database as having finished
crash recovery successfully. As out of space errors trigger a crash
restart that could lead to the situation that not all unlogged
relations are reset.
Once that happend usage of unlogged relations could yield errors like
"could not open file "...": No such file or directory". Luckily
clusters that show the problem can be fixed by performing a immediate
shutdown, and starting the database again.
To fix, just call ResetUnloggedRelations(UNLOGGED_RELATION_INIT)
earlier, before marking the database as having successfully recovered.
Discussion: 20140912112246.GA4984@alap3.anarazel.de
Backpatch to 9.1 where unlogged tables were introduced.
Abhijit Menon-Sen and Andres Freund
The initial patch for RLS mistakenly included headers associated with
the executor and planner bits in rewrite/rowsecurity.h. Per policy and
general good sense, executor headers should not be included in planner
headers or vice versa.
The include of execnodes.h was a mistaken holdover from previous
versions, while the include of relation.h was used for Relation's
definition, which should have been coming from utils/relcache.h. This
patch cleans these issues up, adds comments to the RowSecurityPolicy
struct and the RowSecurityConfigType enum, and changes Relation->rsdesc
to Relation->rd_rsdesc to follow Relation field naming convention.
Additionally, utils/rel.h was including rewrite/rowsecurity.h, which
wasn't a great idea since that was pulling in things not really needed
in utils/rel.h (which gets included in quite a few places). Instead,
use 'struct RowSecurityDesc' for the rd_rsdesc field and add comments
explaining why.
Lastly, add an include into access/nbtree/nbtsort.c for
utils/sortsupport.h, which was evidently missed due to the above mess.
Pointed out by Tom in 16970.1415838651@sss.pgh.pa.us; note that the
concerns regarding a similar situation in the custom-path commit still
need to be addressed.
Per complaint from Tom.
While at it, throw in some extra tests for nulls as well, and make sure
that the set of data we insert on the second round is not identical to
the first one. Both measures are intended to improve coverage of the
test.
Also uncomment the ON COMMIT DROP clause on the CREATE TEMP TABLE
commands. This doesn't have any effect for someone examining the
regression database after the tests are done, but it reduces clutter for
those that execute the script directly.
This function has a loop which can lead to uninterruptible process
"stalls" (actually infinite loops) when some bugs are triggered. Avoid
that unpleasant situation by adding a check for interrupts in a place
that shouldn't degrade performance in the normal case.
Backpatch to 9.3. Older branches have an identical loop here, but the
aforementioned bugs are only a problem starting in 9.3 so there doesn't
seem to be any point in backpatching any further.
In some workloads BufferGetBlockNumber() shows up in profiles due to
the sheer number of calls to it (and because it causes cache
misses). The compiler can't move it out of the loop because it's a
full extern function call...
pg_atomic_init_u64 (indirectly) uses compare/exchange to guarantee
atomic writes on platforms where compare/exchange is available, but
64bit writes aren't atomic (yes, those exist). That leads to a
harmless read of the initial value of variable.
Fix breakage induced by commits d8d3d2a4f3
and 463f2625a5fb183b6a8925ccde98bb3889f921d9: pg_dumpall has crashed when
attempting to dump from pre-8.1 servers since then, due to faulty
construction of the query used for dumping roles from older servers.
The query was erroneous as of the earlier commit, but it wasn't exposed
unless you tried to use --binary-upgrade, which you presumably wouldn't
with a pre-8.1 server. However commit 463f2625a made it fail always.
In HEAD, also fix additional breakage induced in the same query by
commit 491c029dbc, which evidently wasn't
tested against pre-8.1 servers either.
The bug is only latent in 9.1 because 463f2625a hadn't landed yet, but
it seems best to back-patch all branches containing the faulty query.
Gilles Darold
There are basically three situations in which logical decoding needs
to perform cache invalidation. During/After replaying a transaction
with catalog changes, when skipping a uninteresting transaction that
performed catalog changes and when erroring out while replaying a
transaction. Unfortunately these three cases were all done slightly
differently - partially because 8de3e410fa, which greatly simplifies
matters, got committed in the midst of the development of logical
decoding.
The actually problematic case was when logical decoding skipped
transaction commits (and thus processed invalidations). When used via
the SQL interface cache invalidation could access the catalog - bad,
because we didn't set up enough state to allow that correctly. It'd
not be hard to setup sufficient state, but the simpler solution is to
always perform cache invalidation outside a valid transaction.
Also make the different cache invalidation cases look as similar as
possible, to ease code review.
This fixes the assertion failure reported by Antonin Houska in
53EE02D9.7040702@gmail.com. The presented testcase has been expanded
into a regression test.
Backpatch to 9.4, where logical decoding was introduced.
When building the initial historic catalog snapshot there were
scenarios where snapbuild.c would use incorrect xmin/xmax values when
starting from a xl_running_xacts record. The values used were always a
bit suspect, but happened to be correct in the easy to test
cases. Notably the values used when the the initial snapshot was
computed while no other transactions were running were correct.
This is likely to be the cause of the occasional buildfarm failures on
animals markhor and tick; but it's quite possible to reproduce
problems without CLOBBER_CACHE_ALWAYS.
Backpatch to 9.4, where logical decoding was introduced.
There was a window in RestoreBackupBlock where a page would be zeroed out,
but not yet locked. If a backend pinned and locked the page in that window,
it saw the zeroed page instead of the old page or new page contents, which
could lead to missing rows in a result set, or errors.
To fix, replace RBM_ZERO with RBM_ZERO_AND_LOCK, which atomically pins,
zeroes, and locks the page, if it's not in the buffer cache already.
In stable branches, the old RBM_ZERO constant is renamed to RBM_DO_NOT_USE,
to avoid breaking any 3rd party extensions that might use RBM_ZERO. More
importantly, this avoids renumbering the other enum values, which would
cause even bigger confusion in extensions that use ReadBufferExtended, but
haven't been recompiled.
Backpatch to all supported versions; this has been racy since hot standby
was introduced.
The hope is that we can use this to produce better diagnostics in
some cases.
Peter Geoghegan, reviewed by Michael Paquier, with some further
changes by me.
This only happens if a client issues a Parse message with an empty query
string, which is a bit odd; but since it is explicitly called out as legal
by our FE/BE protocol spec, we'd probably better continue to allow it.
Fix by adding tests everywhere that the raw_parse_tree field is passed to
functions that don't or shouldn't accept NULL. Also make it clear in the
relevant comments that NULL is an expected case.
This reverts commits a73c9dbab0 and
2e9650cbcf, which fixed specific crash
symptoms by hacking things at what now seems to be the wrong end, ie the
callee functions. Making the callees allow NULL is superficially more
robust, but it's not always true that there is a defensible thing for the
callee to do in such cases. The caller has more context and is better
able to decide what the empty-query case ought to do.
Per followup discussion of bug #11335. Back-patch to 9.2. The code
before that is sufficiently different that it would require development
of a separate patch, which doesn't seem worthwhile for what is believed
to be an essentially cosmetic change.
Heikki noticed in 544E23C0.8090605@vmware.com that slot.c and
snapbuild.c were missing the FIN_CRC32 call when computing/checking
checksums of on disk files. That doesn't lower the the error detection
capabilities of the checksum, but is inconsistent with other usages.
In a followup mail Heikki also noticed that, contrary to a comment,
the 'version' and 'length' struct fields of replication slot's on disk
data where not covered by the checksum. That's not likely to lead to
actually missed corruption as those fields are cross checked with the
expected version and the actual file length. But it's wrong
nonetheless.
As fixing these issues makes existing on disk files unreadable, bump
the expected versions of on disk files for both slots and logical
decoding historic catalog snapshots. This means that loading old
files will fail with
ERROR: "replication slot file ... has unsupported version 1"
and
ERROR: "snapbuild state file ... has unsupported version 1 instead of
2" respectively. Given the low likelihood of anybody already using
these new features in a production setup that seems acceptable.
Fixing these issues made me notice that there's no regression test
covering the loading of historic snapshot from disk - so add one.
Backpatch to 9.4 where these features were introduced.
On Windows, DROP TABLESPACE has a race condition when run concurrently
with other processes having opened files in the tablespace. This led to
a rare failure on buildfarm member frogmouth. Back-patch to 9.4, where
the reconnection was introduced.
When the recursive search in dependency.c visits a column and then later
visits the whole table containing the column, it needs to propagate the
drop-context flags for the table to the existing target-object entry for
the column. Otherwise we might refuse the DROP (if not CASCADE) on the
incorrect grounds that there was no automatic drop pathway to the column.
Remarkably, this has not been reported before, though it's possible at
least when an extension creates both a datatype and a table using that
datatype.
Rather than just marking the column as allowed to be dropped, it might
seem good to skip the DROP COLUMN step altogether, since the later DROP
of the table will surely get the job done. The problem with that is that
the datatype would then be dropped before the table (since the whole
situation occurred because we visited the datatype, and then recursed to
the dependent column, before visiting the table). That seems pretty risky,
and the case is rare enough that it doesn't seem worth expending a lot of
effort or risk to make the drops happen in a safe order. So we just play
dumb and delete the column separately according to the existing drop
ordering rules.
Per report from Petr Jelinek, though this is different from his proposed
patch.
Back-patch to 9.1, where extensions were introduced. There's currently
no evidence that such cases can arise before 9.1, and in any case we would
also need to back-patch cb5c2ba2d8 to 9.0
if we wanted to back-patch this.
Previously the maximum size of GIN pending list was controlled only by
work_mem. But the reasonable value of work_mem and the reasonable size
of the list are basically not the same, so it was not appropriate to
control both of them by only one GUC, i.e., work_mem. This commit
separates new GUC, pending_list_cleanup_size, from work_mem to allow
users to control only the size of the list.
Also this commit adds pending_list_cleanup_size as new storage parameter
to allow users to specify the size of the list per index. This is useful,
for example, when users want to increase the size of the list only for
the GIN index which can be updated heavily, and decrease it otherwise.
Reviewed by Etsuro Fujita.
I missed an additional colon in previous patch. Oops. to make that mistake
less likely in the future, add comments as placeholders for unused inputs
and outputs in inline assembly.
The code that generates the BRIN_XLOG_UPDATE removes the buffer
reference when the page that's target for the updated tuple is freshly
initialized. This is a pretty usual optimization, but was breaking the
case where the revmap buffer, which is referenced in the same WAL
record, is getting a backup block: the replay code was using backup
block index 1, which is not valid when the update target buffer gets
pruned; the revmap buffer gets assigned 0 instead. Make sure to use the
correct backup block index for revmap when replaying.
Bug reported by Fujii Masao.
At one time it wasn't terribly important what column names were associated
with the fields of a composite Datum, but since the introduction of
operations like row_to_json(), it's important that looking up the rowtype
ID embedded in the Datum returns the column names that users would expect.
That did not work terribly well before this patch: you could get the column
names of the underlying table, or column aliases from any level of the
query, depending on minor details of the plan tree. You could even get
totally empty field names, which is disastrous for cases like row_to_json().
To fix this for whole-row Vars, look to the RTE referenced by the Var, and
make sure its column aliases are applied to the rowtype associated with
the result Datums. This is a tad scary because we might have to return
a transient RECORD type even though the Var is declared as having some
named rowtype. In principle it should be all right because the record
type will still be physically compatible with the named rowtype; but
I had to weaken one Assert in ExecEvalConvertRowtype, and there might be
third-party code containing similar assumptions.
Similarly, RowExprs have to be willing to override the column names coming
from a named composite result type and produce a RECORD when the column
aliases visible at the site of the RowExpr differ from the underlying
table's column names.
In passing, revert the decision made in commit 398f70ec07 to add
an alias-list argument to ExecTypeFromExprList: better to provide that
functionality in a separate function. This also reverts most of the code
changes in d685814835, which we don't need because we're no longer
depending on the tupdesc found in the child plan node's result slot to be
blessed.
Back-patch to 9.4, but not earlier, since this solution changes the results
in some cases that users might not have realized were buggy. We'll apply a
more restricted form of this patch in older branches.
Besides a couple of typo fixes, per David Rowley, Thom Brown, and Amit
Langote, and mentions of BRIN in the general CREATE INDEX page again per
David, this includes silencing MSVC compiler warnings (thanks Microsoft)
and an additional variable initialization per Coverity scanner.
Reported by David Rowley: variadic macros are a problem. Get rid of
them using a trick suggested by Tom Lane: add extra parentheses where
needed. In the future we might decide we don't need the calls at all
and remove them, but it seems appropriate to keep them while this code
is still new.
Also from David Rowley: brininsert() was trying to use a variable before
initializing it. Fix by moving the brin_form_tuple call (which
initializes the variable) to within the locked section.
Reported by Peter Eisentraut: can't use "new" as a struct member name,
because C++ compilers will choke on it, as reported by cpluspluscheck.
Work around accidental test failures because the working directory path
is too long by creating a temporary directory in the (hopefully shorter)
system location, symlinking that to the working directory, and creating
the tablespaces using the shorter path.
This allows extension modules to define their own methods for
scanning a relation, and get the core code to use them. It's
unclear as yet how much use this capability will find, but we
won't find out if we never commit it.
KaiGai Kohei, reviewed at various times and in various levels
of detail by Shigeru Hanada, Tom Lane, Andres Freund, Álvaro
Herrera, and myself.
Now that the backup blocks are appended to the WAL record in xloginsert.c,
XLogInsert doesn't see them anymore and cannot remove them from the version
reconstructed for xlog_outdesc. This makes running with wal_debug=on more
expensive, as we now make (unnecessary) temporary copies of the backup
blocks, but it doesn't seem worth convoluting the code to keep that
optimization.
Reported by Alvaro Herrera.
Test misc depends on brin, but it was earlier in the serial schedule
file. I didn't notice this because I only run the parallel schedule,
but the buildfarm exposed my folly ...
BRIN is a new index access method intended to accelerate scans of very
large tables, without the maintenance overhead of btrees or other
traditional indexes. They work by maintaining "summary" data about
block ranges. Bitmap index scans work by reading each summary tuple and
comparing them with the query quals; all pages in the range are returned
in a lossy TID bitmap if the quals are consistent with the values in the
summary tuple, otherwise not. Normal index scans are not supported
because these indexes do not store TIDs.
As new tuples are added into the index, the summary information is
updated (if the block range in which the tuple is added is already
summarized) or not; in the latter case, a subsequent pass of VACUUM or
the brin_summarize_new_values() function will create the summary
information.
For data types with natural 1-D sort orders, the summary info consists
of the maximum and the minimum values of each indexed column within each
page range. This type of operator class we call "Minmax", and we
supply a bunch of them for most data types with B-tree opclasses.
Since the BRIN code is generalized, other approaches are possible for
things such as arrays, geometric types, ranges, etc; even for things
such as enum types we could do something different than minmax with
better results. In this commit I only include minmax.
Catalog version bumped due to new builtin catalog entries.
There's more that could be done here, but this is a good step forwards.
Loosely based on ideas from Simon Riggs; code mostly by Álvaro Herrera,
with contribution by Heikki Linnakangas.
Patch reviewed by: Amit Kapila, Heikki Linnakangas, Robert Haas.
Testing help from Jeff Janes, Erik Rijkers, Emanuel Calvo.
PS:
The research leading to these results has received funding from the
European Union's Seventh Framework Programme (FP7/2007-2013) under
grant agreement n° 318633.
The code that generated a record to clear the F_TUPLES_DELETED flag hasn't
existed since we got rid of old-style VACUUM FULL. I kept the code that sets
the flag, although it's not used for anything anymore, because it might
still be interesting information for debugging purposes that some tuples
have been deleted from a page.
Likewise, the code to turn the root page from non-leaf to leaf page was
removed when we got rid of old-style VACUUM FULL. Remove the code to replay
that action, too.
dict_thesaurus stored phrase IDs in uint16 fields, so it would get confused
and even crash if there were more than 64K entries in the configuration
file. It turns out to be basically free to widen the phrase IDs to uint32,
so let's just do so.
This was complained of some time ago by David Boutin (in bug #7793);
he later submitted an informal patch but it was never acted on.
We now have another complaint (bug #11901 from Luc Ouellette) so it's
time to make something happen.
This is basically Boutin's patch, but for future-proofing I also added a
defense against too many words per phrase. Note that we don't need any
explicit defense against overflow of the uint32 counters, since before that
happens we'd hit array allocation sizes that repalloc rejects.
Back-patch to all supported branches because of the crash risk.
The default JSONB GIN opclass (jsonb_ops) converts numeric data values
to strings for storage in the index. It must ensure that numeric values
that would compare equal (such as 12 and 12.00) produce identical strings,
else index searches would have behavior different from regular JSONB
comparisons. Unfortunately the function charged with doing this was
completely wrong: it could reduce distinct numeric values to the same
string, or reduce equivalent numeric values to different strings. The
former type of error would only lead to search inefficiency, but the
latter type of error would cause index entries that should be found by
a search to not be found.
Repairing this bug therefore means that it will be necessary for 9.4 beta
testers to reindex GIN jsonb_ops indexes, if they care about getting
correct results from index searches involving numeric data values within
the comparison JSONB object.
Per report from Thomas Fanghaenel.
Previously .ready file was created for the timeline history file at the end
of an archive recovery even when WAL archiving was not enabled.
This creation is unnecessary and causes .ready file to remain infinitely.
This commit changes an archive recovery so that it creates .ready file for
the timeline history file only when WAL archiving is enabled.
Backpatch to all supported versions.
xlog.c is huge, this makes it a little bit smaller, which is nice. Functions
related to putting together the WAL record are in xloginsert.c, and the
lower level stuff for managing WAL buffers and such are in xlog.c.
Also move the definition of XLogRecord to a separate header file. This
causes churn in the #includes of all the files that write WAL records, and
redo routines, but it avoids pulling in xlog.h into most places.
Reviewed by Michael Paquier, Alvaro Herrera, Andres Freund and Amit Kapila.
Long ago we briefly had an "autocommit" GUC that turned server-side
autocommit on and off. That behavior was removed in 7.4 after concluding
that it broke far too much client-side logic, and making clients cope with
both behaviors was impractical. But the GUC variable was left behind, so
as not to break any client code that might be trying to read its value.
Enough time has now passed that we should remove the GUC completely.
Whatever vestigial backwards-compatibility benefit it had is outweighed by
the risk of confusion for newbies who assume it ought to do something,
as per a recent complaint from Wolfgang Wilhelm.
In passing, adjust what seemed to me a rather confusing documentation
reference to libpq's autocommit behavior. libpq as such knows nothing
about autocommit, so psql is probably what was meant.
Obviously, every translation unit should not be declaring this
separately. It needs to be PGDLLIMPORT as well, to avoid breaking
third-party code that uses any of the functions that the commit
mentioned above changed to macros.
This is a followup to commit 43ac12c6e6,
which added regression tests checking that I/O functions of built-in
types are not marked volatile. Complaining in CREATE TYPE should push
developers of add-on types to fix any misdeclared functions in their
types. It's just a warning not an error, to avoid creating upgrade
problems for what might be just cosmetic mis-markings.
Aside from adding the warning code, fix a number of types that were
sloppily created in the regression tests.
The previous coding assumed that we could just let buffers for the
database's old tablespace age out of the buffer arena naturally.
The folly of that is exposed by bug #11867 from Marc Munro: the user could
later move the database back to its original tablespace, after which any
still-surviving buffers would match lookups again and appear to contain
valid data. But they'd be missing any changes applied while the database
was in the new tablespace.
This has been broken since ALTER SET TABLESPACE was introduced, so
back-patch to all supported branches.
The old algorithm was found to not be the usual CRC-32 algorithm, used by
Ethernet et al. We were using a non-reflected lookup table with code meant
for a reflected lookup table. That's a strange combination that AFAICS does
not correspond to any bit-wise CRC calculation, which makes it difficult to
reason about its properties. Although it has worked well in practice, seems
safer to use a well-known algorithm.
Since we're changing the algorithm anyway, we might as well choose a
different polynomial. The Castagnoli polynomial has better error-correcting
properties than the traditional CRC-32 polynomial, even if we had
implemented it correctly. Another reason for picking that is that some new
CPUs have hardware support for calculating CRC-32C, but not CRC-32, let
alone our strange variant of it. This patch doesn't add any support for such
hardware, but a future patch could now do that.
The old algorithm is kept around for tsquery and pg_trgm, which use the
values in indexes that need to remain compatible so that pg_upgrade works.
While we're at it, share the old lookup table for CRC-32 calculation
between hstore, ltree and core. They all use the same table, so might as
well.
The reasons behind commit 0d147e43ad still
stand, so this reverts the non-cosmetic portion of commit
a7983e989d. Back-patch to 9.4, where the
latter commit first appeared.
Cygwin builds require this of dependencies pertaining to pattern rules.
On Cygwin, stat("foo") in the absence of a file with that exact name can
locate foo.exe. While GNU make uses stat() for dependencies of ordinary
rules, it uses readdir() to assess dependencies of pattern rules.
Therefore, a pattern rule dependency should match any underlying file
name exactly. Back-patch to 9.4, where the dependency was introduced.
A background worker can use pq_redirect_to_shm_mq() to direct protocol
that would normally be sent to the frontend to a shm_mq so that another
process may read them.
The receiving process may use pq_parse_errornotice() to parse an
ErrorResponse or NoticeResponse from the background worker and, if
it wishes, ThrowErrorData() to propagate the error (with or without
further modification).
Patch by me. Review by Andres Freund.
This reassociates a dynamic shared memory handle previous passed to
dsm_pin_mapping with the current resource owner, so that it will be
cleaned up at the end of the current query.
Patch by me. Review of the function name by Andres Freund, Amit
Kapila, Jim Nasby, Petr Jelinek, and Álvaro Herrera.
As noted by Noah Misch, my initial cut at fixing bug #11638 didn't cover
all cases where ANALYZE might be invoked in an unsafe context. We need to
test the result of IsInTransactionChain not IsTransactionBlock; which is
notationally a pain because IsInTransactionChain requires an isTopLevel
flag, which would have to be passed down through several levels of callers.
I chose to pass in_outer_xact (ie, the result of IsInTransactionChain)
rather than isTopLevel per se, as that seemed marginally more apropos
for the intermediate functions to know about.
Nobody seemed concerned about this naming when it originally went in,
but there's a pending patch that implements the opposite of
dsm_keep_mapping, and the term "unkeep" was judged unpalatable.
"unpin" has existing precedent in the PostgreSQL code base, and the
English language, so use this terminology instead.
Per discussion, back-patch to 9.4.
VACUUM and ANALYZE update the target table's pg_class row in-place, that is
nontransactionally. This is OK, more or less, for the statistical columns,
which are mostly nontransactional anyhow. It's not so OK for the DDL hint
flags (relhasindex etc), which might get changed in response to
transactional changes that could still be rolled back. This isn't a
problem for VACUUM, since it can't be run inside a transaction block nor
in parallel with DDL on the table. However, we allow ANALYZE inside a
transaction block, so if the transaction had earlier removed the last
index, rule, or trigger from the table, and then we roll back the
transaction after ANALYZE, the table would be left in a corrupted state
with the hint flags not set though they should be.
To fix, suppress the hint-flag updates if we are InTransactionBlock().
This is safe enough because it's always OK to postpone hint maintenance
some more; the worst-case consequence is a few extra searches of pg_index
et al. There was discussion of instead using a transactional update,
but that would change the behavior in ways that are not all desirable:
in most scenarios we're better off keeping ANALYZE's statistical values
even if the ANALYZE itself rolls back. In any case we probably don't want
to change this behavior in back branches.
Per bug #11638 from Casey Shobe. This has been broken for a good long
time, so back-patch to all supported branches.
Tom Lane and Michael Paquier, initial diagnosis by Andres Freund
Instead of initializing a new TransInvalidationInfo for every
transaction or subtransaction, we can just do it for those
transactions or subtransactions that actually need to queue
invalidation messages. That also avoids needing to free those
entries at the end of a transaction or subtransaction that does
not generate any invalidation messages, which is by far the
common case.
Patch by me. Review by Simon Riggs and Andres Freund.
If you call PQreset() repeatedly, and the connection cannot be
re-established, the error messages from the failed connection attempts
kept accumulating in the error string.
Fixes bug #11455 reported by Caleb Epstein. Backpatch to all supported
versions.
Since we got rid of non-MVCC catalog scans, the fourth reason given for
using a non-transactional update in index_update_stats() is obsolete.
The other three are still good, so we're not going to change the code,
but fix the comment.
Newer toolchains append the extension implicitly if missing, but
buildfarm member narwhal (gcc 3.4.2, ld 2.15.91 20040904) does not.
This affects most core libraries having an exports.txt file, namely
libpq and the ECPG support libraries. On Windows Server 2003, Windows
API functions that load and unload DLLs internally will mistakenly
unload a libpq whose DLL header reports "LIBPQ" instead of "LIBPQ.dll".
When, subsequently, control would return to libpq, the backend crashes.
Back-patch to 9.4, like commit 846e91e022.
Before that commit, we used a different linking technique that yielded
"libpq.dll" in the DLL header.
Commit 53566fc094 worked around this by
eliminating a call to a function that loads and unloads DLLs internally.
That commit is no longer necessary for correctness, but its improving
consistency with the MSVC build remains valid.
1. The comparison for matching terms used only the CRC to decide if there's
a match. Two different terms with the same CRC gave a match.
2. It assumed that if the second operand has more terms than the first, it's
never a match. That assumption is bogus, because there can be duplicate
terms in either operand.
Rewrite the implementation in a way that doesn't have those bugs.
Backpatch to all supported versions.
Commit ad5d46a449 thought that we could
get around the known portability issues of strftime's %Z specifier by
using %z instead. However, that idea seems to have been innocent of
any actual research, as it certainly missed the facts that
(1) %z is not portable to pre-C99 systems, and
(2) %z doesn't actually act differently from %Z on Windows anyway.
Per failures on buildfarm member hamerkop.
While at it, centralize the code defining what strftime format we
want to use in pg_dump; three copies of that string seems a bit much.
The malloc request was 1 byte too small for the worst-case output.
This seems relatively unlikely to cause any problems in practice,
as the worst case only occurs if the input string contains no
characters other than single-quote or newline, and even then
malloc alignment padding would probably save the day. But it's
definitely a bug.
David Rowley
Since we taught btree to handle ScalarArrayOpExpr quals natively (commit
9e8da0f757), the planner has always included
ScalarArrayOpExpr quals in index conditions if possible. However, if the
qual is for a non-first index column, this could result in an inferior plan
because we can no longer take advantage of index ordering (cf. commit
807a40c551). It can be better to omit the
ScalarArrayOpExpr qual from the index condition and let it be done as a
filter, so that the output doesn't need to get sorted. Indeed, this is
true for the query introduced as a test case by the latter commit.
To fix, restructure get_index_paths and build_index_paths so that we
consider paths both with and without ScalarArrayOpExpr quals in non-first
index columns. Redesign the API of build_index_paths so that it reports
what it found, saving useless second or third calls.
Report and patch by Andrew Gierth (though rather heavily modified by me).
Back-patch to 9.2 where this code was introduced, since the issue can
result in significant performance regressions compared to plans produced
by 9.1 and earlier.
Perl 5.12 ships with a somewhat broken version of Test::Simple, so skip
the tests if that is found.
The relevant fix is
0.98 Wed, 23 Feb 2011 14:38:02 +1100
Bug Fixes
* subtest() should not fail if $? is non-zero. (Aaron Crane)
The prove program included in Perl 5.8 does not support the --ext
option, so don't use that and use wildcards on the command line instead.
Note that the tests will still all be skipped, because, for instance,
the version of Test::More is too old, but at least the regular
mechanisms for handling that will apply, instead of failing to call
prove altogether.
Windows has one a locale whose name contains a non-ASCII character:
"Norwegian (Bokmål)" (that's an 'a' with a ring on top). That causes
trouble; when passing it setlocale(), it's not clear what encoding the
argument should be in. Another problem is that the locale name is stored in
pg_database catalog table, and the encoding used there depends on what
server encoding happens to be in use when the database is created. For
example, if you issue the CREATE DATABASE when connected to a UTF-8
database, the locale name is stored in pg_database in UTF-8. As long as all
locale names are pure ASCII, that's not a problem.
To work around that, map the troublesome locale name to a pure-ASCII alias
of the same locale, "norwegian-bokmal".
Now, this doesn't change the existing values that are already in
pg_database and in postgresql.conf. Old clusters will need to be fixed
manually. Instructions for that need to be put in the release notes.
This fixes bug #11431 reported by Alon Siman-Tov. Backpatch to 9.2;
backpatching further would require more work than seems worth it.
Peter Eisentraut
Alvaro Herrera
Tom Lane
Heikki Linnakangas
Robert Haas
Bruce Momjian
Michael Meskes
Fujii Masao
Noah Misch
Andres Freund
Kevin Grittner
Stephen Frost
Andrew Dunstan
Magnus Hagander
Simon Riggs