brenext(), when parsing a '*' quantifier, forgot to return any "value"
for the token; per the equivalent case in next(), it should return
value 1 to indicate that greedy rather than non-greedy behavior is
wanted. The result is that the compiled regexp could behave like 'x*?'
rather than the intended 'x*', if we were unlucky enough to have
a zero in v->nextvalue at this point. That seems to happen with some
reliability if we have '.*' at the beginning of a BRE-mode regexp,
although that depends on the initial contents of a stack-allocated
struct, so it's not guaranteed to fail.
Found by Alexander Lakhin using valgrind testing. This bug seems
to be aboriginal in Spencer's code, so back-patch all the way.
Discussion: https://postgr.es/m/16814-6c5e3edd2bdf0d50@postgresql.org
We found last February that the error-case tests added by commit
008cf0409 failed on OpenBSD, because that platform doesn't really
check locale names. At the time it seemed that that was only an issue
for LC_CTYPE, but testing on a more recent version of OpenBSD shows
that it's now equally lax about LC_COLLATE.
Rather than dropping the LC_COLLATE test too, put back LC_CTYPE
(reverting c4b0edb07), and adjust these tests to accept the different
error message that we get if setlocale() doesn't reject a bogus locale
name. The point of these tests is not really what the backend does
with the locale name, but to show that createdb quotes funny locale
names safely; so we're not losing test reliability this way.
Back-patch as appropriate.
Discussion: https://postgr.es/m/231373.1610058324@sss.pgh.pa.us
On reflection, the order of operations in PostgresMain() is wrong.
These timeouts ought to be shut down before, not after, we do the
post-command-read CHECK_FOR_INTERRUPTS, to guarantee that any
timeout error will be detected there rather than at some ill-defined
later point (possibly after having wasted a lot of work).
This is really an error in the original idle_in_transaction_timeout
patch, so back-patch to 9.6 where that was introduced.
The deadlocks that the recovery conflict on lock is involved in can
happen between hot-standby backends and the startup process.
If a backend takes an access exclusive lock on the table and which
finally triggers the deadlock, that deadlock can be detected
as expected. On the other hand, previously, if the startup process
took an access exclusive lock and which finally triggered the deadlock,
that deadlock could not be detected and could remain even after
deadlock_timeout passed. This is a bug.
The cause of this bug was that the code for handling the recovery
conflict on lock didn't take care of deadlock case at all. It assumed
that deadlocks involving the startup process and backends were able
to be detected by the deadlock detector invoked within backends.
But this assumption was incorrect. The startup process also should
have invoked the deadlock detector if necessary.
To fix this bug, this commit makes the startup process invoke
the deadlock detector if deadlock_timeout is reached while handling
the recovery conflict on lock. Specifically, in that case, the startup
process requests all the backends holding the conflicting locks to
check themselves for deadlocks.
Back-patch to v9.6. v9.5 has also this bug, but per discussion we decided
not to back-patch the fix to v9.5. Because v9.5 doesn't have some
infrastructure codes (e.g., 37c54863cf) that this bug fix patch depends on.
We can apply those codes for the back-patch, but since the next minor
version release is the final one for v9.5, it's risky to do that. If we
unexpectedly introduce new bug to v9.5 by the back-patch, there is no
chance to fix that. We determined that the back-patch to v9.5 would give
more risk than gain.
Author: Fujii Masao
Reviewed-by: Bertrand Drouvot, Masahiko Sawada, Kyotaro Horiguchi
Discussion: https://postgr.es/m/4041d6b6-cf24-a120-36fa-1294220f8243@oss.nttdata.com
The default value of recovery_target_timeline was changed in v12,
but the description about the default behavior of that was not updated.
Back-patch to v12 where the default behavior of recovery_target_timeline
was changed.
Author: Benoit Lobréau
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CAPE8EZ7c3aruEmM24GYkj8y8WmHKD1m9TtPtgCF0nQ3zw4LCkQ@mail.gmail.com
In power_var_int(), the computation of the number of significant
digits to use in the computation used log(Abs(exp)), which isn't safe
because Abs(exp) returns INT_MIN when exp is INT_MIN. Use fabs()
instead of Abs(), so that the exponent is cast to a double before the
absolute value is taken.
Back-patch to 9.6, where this was introduced (by 7d9a4737c2).
Discussion: https://postgr.es/m/CAEZATCVd6pMkz=BrZEgBKyqqJrt2xghr=fNc8+Z=5xC6cgWrWA@mail.gmail.com
If the substring start index and length overflow when added together,
substring() misbehaved, either throwing a bogus "negative substring
length" error on a case that should succeed, or failing to complain that
a negative length is negative (and instead returning the whole string,
in most cases). Unsurprisingly, the text, bytea, and bit variants of
the function all had this issue. Rearrange the logic to ensure that
negative lengths are always rejected, and add an overflow check to
handle the other case.
Also install similar guards into detoast_attr_slice() (nee
heap_tuple_untoast_attr_slice()), since it's far from clear that
no other code paths leading to that function could pass it values
that would overflow.
Patch by myself and Pavel Stehule, per bug #16804 from Rafi Shamim.
Back-patch to v11. While these bugs are old, the common/int.h
infrastructure for overflow-detecting arithmetic didn't exist before
commit 4d6ad3125, and it doesn't seem like these misbehaviors are bad
enough to justify developing a standalone fix for the older branches.
Discussion: https://postgr.es/m/16804-f4eeeb6c11ba71d4@postgresql.org
On further reflection it seems better to call PageGetMaxOffsetNumber()
after acquiring a buffer lock on the page. This shouldn't really
matter, but doing it this way is cleaner.
Follow-up to commit 42288174.
Backpatch: 12-, just like commit 42288174
The logic for determining the latest removed XID for the purposes of
generating recovery conflicts in REDO routines was subtly broken. It
failed to follow links from HOT chains, and so failed to consider all
relevant heap tuple headers in some cases.
To fix, expand the loop that deals with LP_REDIRECT line pointers to
also deal with HOT chains. The new version of the loop is loosely based
on a similar loop from heap_prune_chain().
The impact of this bug is probably quite limited, since the horizon code
necessarily deals with heap tuples that are pointed to by LP_DEAD-set
index tuples. The process of setting LP_DEAD index tuples (e.g. within
the kill_prior_tuple mechanism) is highly correlated with opportunistic
pruning of pointed-to heap tuples. Plus the question of generating a
recovery conflict usually comes up some time after index tuple LP_DEAD
bits were initially set, unlike heap pruning, where a latestRemovedXid
is generated at the point of the pruning operation (heap pruning has no
deferred "would-be page split" style processing that produces conflicts
lazily).
Only backpatch to Postgres 12, the first version where this logic runs
during original execution (following commit 558a9165e0). The index
latestRemovedXid mechanism has had the same bug since it first appeared
over 10 years ago (in commit a760893d), but backpatching to all
supported versions now seems like a bad idea on balance. Running the
new improved code during recovery seems risky, especially given the lack
of complaints from the field.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-Wz=Eib393+HHcERK_9MtgNS7Ew1HY=RDC_g6GL46zM5C6Q@mail.gmail.com
Backpatch: 12-
The behavior of cross-type comparisons among date/time data types was
not really explained anywhere. You could probably infer it if you
recognized the applicability of comments elsewhere about datatype
conversions, but it seems worthy of explicit documentation.
Per bug #16797 from Dana Burd.
Discussion: https://postgr.es/m/16797-f264b0b980b53b8b@postgresql.org
secure_open_gssapi() installed the krb_server_keyfile setting as
KRB5_KTNAME unconditionally, so long as it's not empty. However,
pg_GSS_recvauth() only installed it if KRB5_KTNAME wasn't set already,
leading to a troubling inconsistency: in theory, clients could see
different sets of server principal names depending on whether they
use GSSAPI encryption. Always using krb_server_keyfile seems like
the right thing, so make both places do that. Also fix up
secure_open_gssapi()'s lack of a check for setenv() failure ---
it's unlikely, surely, but security-critical actions are no place
to be sloppy.
Also improve the associated documentation.
This patch does nothing about secure_open_gssapi()'s use of setenv(),
and indeed causes pg_GSS_recvauth() to use it too. That's nominally
against project portability rules, but since this code is only built
with --with-gssapi, I do not feel a need to do something about this
in the back branches. A fix will be forthcoming for HEAD though.
Back-patch to v12 where GSSAPI encryption was introduced. The
dubious behavior in pg_GSS_recvauth() goes back further, but it
didn't have anything to be inconsistent with, so let it be.
Discussion: https://postgr.es/m/2187460.1609263156@sss.pgh.pa.us
90fbf7c has taken care of that for HEAD. This includes the portion of
the fixes that applies to the documentation, where needed depending on
the branch.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20201227202604.GC26311@telsasoft.com
Backpatch-through: 9.5
Include details on whether GSS encryption has been activated;
since we added "hostgssenc" type HBA entries, that's relevant info.
Kyotaro Horiguchi and Tom Lane. Back-patch to v12 where
GSS encryption was introduced.
Discussion: https://postgr.es/m/e5b0b6ed05764324a2f3fe7acfc766d5@smhi.se
Unrecoverable errors detected by GSSAPI encryption can't just be
reported with elog(ERROR) or elog(FATAL), because attempting to
send the error report to the client is likely to lead to infinite
recursion or loss of protocol sync. Instead make this code do what
the SSL encryption code has long done, which is to just report any
such failure to the server log (with elevel COMMERROR), then pretend
we've lost the connection by returning errno = ECONNRESET.
Along the way, fix confusion about whether message translation is done
by pg_GSS_error() or its callers (the latter should do it), and make
the backend version of that function work more like the frontend
version.
Avoid allocating the port->gss struct until it's needed; we surely
don't need to allocate it in the postmaster.
Improve logging of "connection authorized" messages with GSS enabled.
(As part of this, I back-patched the code changes from dc11f31a1.)
Make BackendStatusShmemSize() account for the GSS-related space that
will be allocated by CreateSharedBackendStatus(). This omission
could possibly cause out-of-shared-memory problems with very high
max_connections settings.
Remove arbitrary, pointless restriction that only GSS authentication
can be used on a GSS-encrypted connection.
Improve documentation; notably, document the fact that libpq now
prefers GSS encryption over SSL encryption if both are possible.
Per report from Mikael Gustavsson. Back-patch to v12 where
this code was introduced.
Discussion: https://postgr.es/m/e5b0b6ed05764324a2f3fe7acfc766d5@smhi.se
The critical issue fixed here is that if a GSSAPI-encrypted connection
is successfully made, pqsecure_open_gss() cleared conn->allow_ssl_try,
as an admittedly-hacky way of preventing us from then trying to tunnel
SSL encryption over the already-encrypted connection. The problem
with that is that if we abandon the GSSAPI connection because of a
failure during authentication, we would not attempt SSL encryption
in the next try with the same server. This can lead to unexpected
connection failure, or silently getting a non-encrypted connection
where an encrypted one is expected.
Fortunately, we'd only manage to make a GSSAPI-encrypted connection
if both client and server hold valid tickets in the same Kerberos
infrastructure, which is a relatively uncommon environment.
Nonetheless this is a very nasty bug with potential security
consequences. To fix, don't reset the flag, instead adding a
check for conn->gssenc being already true when deciding whether
to try to initiate SSL.
While here, fix some lesser issues in libpq's GSSAPI code:
* Use the need_new_connection stanza when dropping an attempted
GSSAPI connection, instead of partially duplicating that code.
The consequences of this are pretty minor: AFAICS it could only
lead to auth_req_received or password_needed remaining set when
they shouldn't, which is not too harmful.
* Fix pg_GSS_error() to not repeat the "mprefix" it's given multiple
times, and to notice any failure return from gss_display_status().
* Avoid gratuitous dependency on NI_MAXHOST in
pg_GSS_load_servicename().
Per report from Mikael Gustavsson. Back-patch to v12 where
this code was introduced.
Discussion: https://postgr.es/m/e5b0b6ed05764324a2f3fe7acfc766d5@smhi.se
There's a second call of get_eval_mcontext() that should also be
get_stmt_mcontext(). This is actually dead code, since no
interesting allocations happen before switching back to the
original context, but we should keep it in sync with the other
call to forestall possible future bugs.
Discussion: https://postgr.es/m/f075f7be-c654-9aa8-3ffc-e9214622f02a@enterprisedb.com
Commit a6b1f5365 intended to place the transient "target" list of
a CALL statement in the function's statement-lifespan context,
but I fat-fingered that and used get_eval_mcontext() instead of
get_stmt_mcontext(). The eval_mcontext belongs to the "simple
expression" infrastructure, which is destroyed at transaction end.
The net effect is that a CALL in a procedure to another procedure
that has OUT or INOUT parameters would fail if the called procedure
did a COMMIT.
Per report from Peter Eisentraut. Back-patch to v11, like the
prior patch.
Discussion: https://postgr.es/m/f075f7be-c654-9aa8-3ffc-e9214622f02a@enterprisedb.com
The code in charge of processing a single invalidation message has been
using since 568d413 the structure for relation mapping messages. This
had fortunately no consequence as both locate the database ID at the
same location, but it could become a problem in the future if this area
of the code changes.
Author: Konstantin Knizhnik
Discussion: https://postgr.es/m/8044c223-4d3a-2cdb-42bf-29940840ce94@postgrespro.ru
Backpatch-through: 9.5
In postgres_fdw, the cached connections to foreign servers will not be
closed until the local session exits if the user mappings or foreign servers
that those connections depend on are dropped. Those connections can be
leaked.
To fix that connection leak issue, after a change to a pg_foreign_server
or pg_user_mapping catalog entry, this commit makes postgres_fdw close
the connections depending on that entry immediately if current
transaction has not used those connections yet. Otherwise, mark those
connections as invalid and then close them at the end of current transaction,
since they cannot be closed in the midst of the transaction using them.
Closed connections will be remade at the next opportunity if necessary.
Back-patch to all supported branches.
Author: Bharath Rupireddy
Reviewed-by: Zhihong Yu, Zhijie Hou, Fujii Masao
Discussion: https://postgr.es/m/CALj2ACVNcGH_6qLY-4_tXz8JLvA+4yeBThRfxMz7Oxbk1aHcpQ@mail.gmail.com
Removing the EXPLAIN test to stabilize the buildfarm. The execution
test should still be effective to catch the bug even if the plan is
slightly different on different platforms.
Before processing tuples, agg_refill_hash_table() was setting all
pergroup pointers to NULL to signal to advance_aggregates() that it
should not attempt to advance groups that had spilled.
The problem was that it also set the pergroups for sorted grouping
sets to NULL, which caused rescanning to fail.
Instead, change agg_refill_hash_table() to only set the pergroups for
hashed grouping sets to NULL; and when compiling the expression, pass
doSort=false.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/16784-7ff169bf2c3d1588%40postgresql.org
Backpatch-through: 13
This makes existing sessions reflect "ALTER ROLE ... [NO]INHERIT" as
quickly as they have been reflecting "GRANT role_name". Back-patch to
9.5 (all supported versions).
Reviewed by Nathan Bossart.
Discussion: https://postgr.es/m/20201221095028.GB3777719@rfd.leadboat.com
Buildfarm members pogona and petalura have shown a failure when
pg_ctl/t/004_logrotate.pl starts just before local midnight.
The default rotate-at-midnight behavior occurs just before the
Perl script examines current_logfiles, so it figures that the
rotation it's already requested has occurred ... but in reality,
that rotation happens just after it looks, so the expected new
log data goes into a different file than the one it's examining.
In HEAD, src/test/kerberos/t/001_auth.pl has acquired similar code
that evidently has a related failure mode. Besides being quite new,
few buildfarm critters run that test, so it's unsurprising that
we've not yet seen a failure there.
Fix both cases by setting log_rotation_age = 0 so that no time-based
rotation can occur. Also absorb 004_logrotate.pl's decision to
set lc_messages = 'C' into the kerberos test, in hopes that it will
work in non-English prevailing locales.
Report: https://buildfarm.postgresql.org/cgi-bin/show_log.pl?nm=pogona&dt=2020-12-24%2022%3A10%3A04
Report: https://buildfarm.postgresql.org/cgi-bin/show_log.pl?nm=petalura&dt=2020-02-01%2022%3A20%3A04
If a database shutdown (smart or fast) is commanded between the time
some process decides to request a new background worker and the time
that the postmaster can launch that worker, then nothing happens
because the postmaster won't launch any bgworkers once it's exited
PM_RUN state. This is fine ... unless the requesting process is
waiting for that worker to finish (or even for it to start); in that
case the requestor is stuck, and only manual intervention will get us
to the point of being able to shut down.
To fix, cancel pending requests for workers when the postmaster sends
shutdown (SIGTERM) signals, and similarly cancel any new requests that
arrive after that point. (We can optimize things slightly by only
doing the cancellation for workers that have waiters.) To fit within
the existing bgworker APIs, the "cancel" is made to look like the
worker was started and immediately stopped, causing deregistration of
the bgworker entry. Waiting processes would have to deal with
premature worker exit anyway, so this should introduce no bugs that
weren't there before. We do have a side effect that registration
records for restartable bgworkers might disappear when theoretically
they should have remained in place; but since we're shutting down,
that shouldn't matter.
Back-patch to v10. There might be value in putting this into 9.6
as well, but the management of bgworkers is a bit different there
(notably see 8ff518699) and I'm not convinced it's worth the effort
to validate the patch for that branch.
Discussion: https://postgr.es/m/661570.1608673226@sss.pgh.pa.us
The parsing of this parameter has been using strtoul(), which is not
portable across platforms. On most Unix platforms, unsigned long has a
size of 64 bits, while on Windows it is 32 bits. It is common in
recovery scenarios to rely on the output of txid_current() or even the
newer pg_current_xact_id() to get a transaction ID for setting up
recovery_target_xid. The value returned by those functions includes the
epoch in the computed result, which would cause strtoul() to fail where
unsigned long has a size of 32 bits once the epoch is incremented.
WAL records and 2PC data include only information about 32-bit XIDs and
it is not possible to have XIDs across more than one epoch, so
discarding the high bits from the transaction ID set has no impact on
recovery. On the contrary, the use of strtoul() prevents a consistent
behavior across platforms depending on the size of unsigned long.
This commit changes the parsing of recovery_target_xid to use
pg_strtouint64() instead, available down to 9.6. There is one TAP test
stressing recovery with recovery_target_xid, where a tweak based on
pg_reset{xlog,wal} is added to bump the XID epoch so as this change gets
tested, as per an idea from Alexander Lakhin.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/16780-107fd0c0385b1035@postgresql.org
Backpatch-through: 9.6
Bad things happen if the DBA issues "pg_ctl stop -m fast" before
autoprewarm finishes loading its list of blocks to prewarm.
The current worker process successfully terminates early, but
(if this wasn't the last database with blocks to prewarm) the
leader process will just try to launch another worker for the
next database. Since the postmaster is now in PM_WAIT_BACKENDS
state, it ignores the launch request, and the leader just sits
until it's killed manually.
This is mostly the fault of our half-baked design for launching
background workers, but a proper fix for that is likely to be
too invasive to be back-patchable. To ameliorate the situation,
fix apw_load_buffers() to check whether SIGTERM has arrived
just before trying to launch another worker. That leaves us with
only a very narrow window in each worker launch where SIGTERM
could occur between the launch request and successful worker start.
Another issue is that if the leader process does manage to exit,
it unconditionally rewrites autoprewarm.blocks with only the
blocks currently in shared buffers, thus forgetting any blocks
that we hadn't reached yet while prewarming. This seems quite
unhelpful, since the next database start will then not have the
expected prewarming benefit. Fix it to not modify the file if
we shut down before the initial load attempt is complete.
Per bug #16785 from John Thompson. Back-patch to v11 where
the autoprewarm code was introduced.
Discussion: https://postgr.es/m/16785-c0207d8c67fb5f25@postgresql.org
While prepare_sort_from_pathkeys has to be concerned about matching up
a volatile expression to the proper tlist entry, we don't need to do
that in find_em_expr_usable_for_sorting_rel becausee such a sort will
have to be postponed anyway.
Author: James Coleman
Reviewed-by: Tomas Vondra
Backpatch-through: 13
Discussion: https://postgr.es/m/CAAaqYe8cK3g5CfLC4w7bs%3DhC0mSksZC%3DH5M8LSchj5e5OxpTAg%40mail.gmail.com
While we do allow SRFs in ORDER BY, scan/join processing should not
consider such cases - such sorts should only happen via final Sort atop
a ProjectSet. So make sure we don't try adding such sorts below Gather
Merge, just like we do for expressions that are volatile and/or not
parallel safe.
Backpatch to PostgreSQL 13, where this code was introduced as part of
the Incremental Sort patch.
Author: James Coleman
Reviewed-by: Tomas Vondra
Backpatch-through: 13
Discussion: https://postgr.es/m/CAAaqYe8cK3g5CfLC4w7bs=hC0mSksZC=H5M8LSchj5e5OxpTAg@mail.gmail.com
Discussion: https://postgr.es/m/295524.1606246314%40sss.pgh.pa.us
The jsonb || jsonb operator arbitrarily rejected certain combinations
of scalar and non-scalar inputs, while being willing to concatenate
other combinations. This was of course quite undocumented. Rather
than trying to document it, let's just remove the restriction,
creating a uniform rule that unless we are handling an object-to-object
concatenation, non-array inputs are converted to one-element arrays,
resulting in an array-to-array concatenation. (This does not change
the behavior for any case that didn't throw an error before.)
Per complaint from Joel Jacobson. Back-patch to all supported branches.
Discussion: https://postgr.es/m/163099.1608312033@sss.pgh.pa.us
Commit ebb7ae839d ensured we ignore pathkeys with volatile expressions
when considering adding a sort below a Gather Merge. Turns out we need
to care about parallel safety of the pathkeys too, otherwise we might
try sorting e.g. on results of a correlated subquery (as demonstrated
by a report from Luis Roberto).
Initial investigation by Tom Lane, patch by James Coleman. Backpatch
to 13, where the code was instroduced (as part of Incremental Sort).
Reported-by: Luis Roberto
Author: James Coleman
Reviewed-by: Tomas Vondra
Backpatch-through: 13
Discussion: https://postgr.es/m/622580997.37108180.1604080457319.JavaMail.zimbra%40siscobra.com.br
Discussion: https://postgr.es/m/CAAaqYe8cK3g5CfLC4w7bs=hC0mSksZC=H5M8LSchj5e5OxpTAg@mail.gmail.com
generate_useful_gather_paths used to skip unsorted paths (without any
pathkeys), but that is unnecessary - the later code actually can handle
such paths just fine by adding a Sort node. This is clearly a thinko,
preventing construction of useful plans.
Backpatch to 13, where Incremental Sort was introduced.
Author: James Coleman
Reviewed-by: Tomas Vondra
Backpatch-through: 13
Discussion: https://postgr.es/m/CAAaqYe8cK3g5CfLC4w7bs=hC0mSksZC=H5M8LSchj5e5OxpTAg@mail.gmail.com
The separate "cd" command before invoking psql made sense (or at least
I thought so) when it was added in commit ed1939332. But 4e3a61635
removed the supporting text that explained when to use it, making it
just confusing. So drop it.
Also switch from four-dot to three-dot filler for the unsupplied
part of the path, since at least one person has read the four-dot
filler as a typo for "../..". And fix these/those inconsistency.
Discussion: https://postgr.es/m/160837647714.673.5195186835607800484@wrigleys.postgresql.org
A narrow reading of the C standard says that memcpy(x,x,n) is undefined,
although it's hard to envision an implementation that would really
misbehave. However, analysis tools such as valgrind might whine about
this; accordingly, let's band-aid relmapper.c to not do it.
See also 5b630501e, d3f4e8a8a, ad7b48ea0, and other similar fixes.
Apparently, none of those folk tried valgrinding initdb? This has been
like this for long enough that I'm surprised it hasn't been reported
before.
Back-patch, just in case anybody wants to use a back branch on a platform
that complains about this; we back-patched those earlier fixes too.
Discussion: https://postgr.es/m/161790.1608310142@sss.pgh.pa.us
It was not clear how COPY TO behaved with partitioning/inheritance
because the paragraphs were so far apart. Also reword to simplify.
Discussion: https://postgr.es/m/20201203211723.GR24052@telsasoft.com
Author: Justin Pryzby
Backpatch-through: 10
Amit Kapila
Bruce Momjian
Tom Lane
Fujii Masao
Dean Rasheed
Peter Geoghegan
Noah Misch
Michael Paquier
Jeff Davis
Tomas Vondra