walsender.h should depend on xlog.h, not vice versa. (Actually, the
inclusion was circular until a couple hours ago, which was even sillier;
but Bruce broke it in the expedient rather than logically correct
direction.) Because of that poor decision, plus blind application of
pgrminclude, we had a situation where half the system was depending on
xlog.h to include such unrelated stuff as array.h and guc.h. Clean up
the header inclusion, and manually revert a lot of what pgrminclude had
done so things build again.
This episode reinforces my feeling that pgrminclude should not be run
without adult supervision. Inclusion changes in header files in particular
need to be reviewed with great care. More generally, it'd be good if we
had a clearer notion of module layering to dictate which headers can sanely
include which others ... but that's a big task for another day.
In the previous coding, we would look up a relation in RangeVarGetRelid,
lock the resulting OID, and then AcceptInvalidationMessages(). While
this was sufficient to ensure that we noticed any changes to the
relation definition before building the relcache entry, it didn't
handle the possibility that the name we looked up no longer referenced
the same OID. This was particularly problematic in the case where a
table had been dropped and recreated: we'd latch on to the entry for
the old relation and fail later on. Now, we acquire the relation lock
inside RangeVarGetRelid, and retry the name lookup if we notice that
invalidation messages have been processed meanwhile. Many operations
that would previously have failed with an error in the presence of
concurrent DDL will now succeed.
There is a good deal of work remaining to be done here: many callers
of RangeVarGetRelid still pass NoLock for one reason or another. In
addition, nothing in this patch guards against the possibility that
the meaning of an unqualified name might change due to the creation
of a relation in a schema earlier in the user's search path than the
one where it was previously found. Furthermore, there's nothing at
all here to guard against similar race conditions for non-relations.
For all that, it's a start.
Noah Misch and Robert Haas
The initial commit of the ALTER TABLE ADD FOREIGN KEY NOT VALID feature
failed to support labeling such constraints as deferrable. The best fix
for this seems to be to fold NOT VALID into ConstraintAttributeSpec.
That's a bit more general than the documented syntax, but it allows
better-targeted syntax error messages.
In addition, do some mostly-but-not-entirely-cosmetic code review for
the whole NOT VALID patch.
This case was missed when NOT VALID constraints were first introduced in
commit 722bf7017b by Simon Riggs on
2011-02-08. Among other things, it causes pg_dump to omit the NOT VALID
flag when dumping such constraints, which may cause them to fail to
load afterwards, if they contained values failing the constraint.
Per report from Thom Brown.
We had some hacks in ruleutils.c to cope with various odd transformations
that the optimizer could do on a CASE foo WHEN "CaseTestExpr = RHS" clause.
However, the fundamental impossibility of covering all cases was exposed
by Heikki, who pointed out that the "=" operator could get replaced by an
inlined SQL function, which could contain nearly anything at all. So give
up on the hacks and just print the expression as-is if we fail to recognize
it as "CaseTestExpr = RHS". (We must cover that case so that decompiled
rules print correctly; but we are not under any obligation to make EXPLAIN
output be 100% valid SQL in all cases, and already could not do so in some
other cases.) This approach requires that we have some printable
representation of the CaseTestExpr node type; I used "CASE_TEST_EXPR".
Back-patch to all supported branches, since the problem case fails in all.
This patch is almost entirely cosmetic --- mostly cleaning up a lot of
neglected comments, and fixing code layout problems in places where the
patch made lines too long and then pgindent did weird things with that.
I did find a bug-of-omission in equalTupleDescs().
I'm not sure these have any non-cosmetic implications, but I'm not sure
they don't, either. In particular, ensure the CaseTestExpr generated
by transformAssignmentIndirection to represent the base target column
carries the correct collation, because parse_collate.c won't fix that.
Tweak lsyscache.c API so that we can get the appropriate collation
without an extra syscache lookup.
Ensure that COLLATE at the top level of an index expression is treated the
same as a grammatically separate COLLATE. Fix bogus reverse-parsing logic
in pg_get_indexdef.
All expression nodes now have an explicit output-collation field, unless
they are known to only return a noncollatable data type (such as boolean
or record). Also, nodes that can invoke collation-aware functions store
a separate field that is the collation value to pass to the function.
This avoids confusion that arises when a function has collatable inputs
and noncollatable output type, or vice versa.
Also, replace the parser's on-the-fly collation assignment method with
a post-pass over the completed expression tree. This allows us to use
a more complex (and hopefully more nearly spec-compliant) assignment
rule without paying for it in extra storage in every expression node.
Fix assorted bugs in the planner's handling of collations by making
collation one of the defining properties of an EquivalenceClass and
by converting CollateExprs into discardable RelabelType nodes during
expression preprocessing.
CollateClause is now used only in raw grammar output, and CollateExpr after
parse analysis. This is for clarity and to avoid carrying collation names
in post-analysis parse trees: that's both wasteful and possibly misleading,
since the collation's name could be changed while the parsetree still
exists.
Also, clean up assorted infelicities and omissions in processing of the
node type.
The initial collations patch treated a COLLATE spec as part of a TypeName,
following what can only be described as brain fade on the part of the SQL
committee. It's a lot more reasonable to treat COLLATE as a syntactically
separate object, so that it can be added in only the productions where it
actually belongs, rather than needing to reject it in a boatload of places
where it doesn't belong (something the original patch mostly failed to do).
In addition this change lets us meet the spec's requirement to allow
COLLATE anywhere in the clauses of a ColumnDef, and it avoids unfriendly
behavior for constructs such as "foo::type COLLATE collation".
To do this, pull collation information out of TypeName and put it in
ColumnDef instead, thus reverting most of the collation-related changes in
parse_type.c's API. I made one additional structural change, which was to
use a ColumnDef as an intermediate node in AT_AlterColumnType AlterTableCmd
nodes. This provides enough room to get rid of the "transform" wart in
AlterTableCmd too, since the ColumnDef can carry the USING expression
easily enough.
Also fix some other minor bugs that have crept in in the same areas,
like failure to copy recently-added fields of ColumnDef in copyfuncs.c.
While at it, document the formerly secret ability to specify a collation
in ALTER TABLE ALTER COLUMN TYPE, ALTER TYPE ADD ATTRIBUTE, and
ALTER TYPE ALTER ATTRIBUTE TYPE; and correct some misstatements about
what the default collation selection will be when COLLATE is omitted.
BTW, the three-parameter form of format_type() should go away too,
since it just contributes to the confusion in this area; but I'll do
that in a separate patch.
This patch implements data-modifying WITH queries according to the
semantics that the updates all happen with the same command counter value,
and in an unspecified order. Therefore one WITH clause can't see the
effects of another, nor can the outer query see the effects other than
through the RETURNING values. And attempts to do conflicting updates will
have unpredictable results. We'll need to document all that.
This commit just fixes the code; documentation updates are waiting on
author.
Marko Tiikkaja and Hitoshi Harada
The recent additions for FDW support required checking foreign-table-ness
in several places in the parse/plan chain. While it's not clear whether
that would really result in a noticeable slowdown, it seems best to avoid
any performance risk by keeping a copy of the relation's relkind in
RangeTblEntry. That might have some other uses later, anyway.
Per discussion.
This adds collation support for columns and domains, a COLLATE clause
to override it per expression, and B-tree index support.
Peter Eisentraut
reviewed by Pavel Stehule, Itagaki Takahiro, Robert Haas, Noah Misch
eval_const_expressions() can replace CaseTestExprs with constants when
the surrounding CASE's test expression is a constant. This confuses
ruleutils.c's heuristic for deparsing simple-form CASEs, leading to
Assert failures or "unexpected CASE WHEN clause" errors. I had put in
a hack solution for that years ago (see commit
514ce7a331 of 2006-10-01), but bug #5794
from Peter Speck shows that that solution failed to cover all cases.
Fortunately, there's a much better way, which came to me upon reflecting
that Peter's "CASE TRUE WHEN" seemed pretty redundant: we can "simplify"
the simple-form CASE to the general form of CASE, by simply omitting the
constant test expression from the rebuilt CASE construct. This is
intuitively valid because there is no need for the executor to evaluate
the test expression at runtime; it will never be referenced, because any
CaseTestExprs that would have referenced it are now replaced by constants.
This won't save a whole lot of cycles, since evaluating a Const is pretty
cheap, but a cycle saved is a cycle earned. In any case it beats kluging
ruleutils.c still further. So this patch improves const-simplification
and reverts the previous change in ruleutils.c.
Back-patch to all supported branches. The bug exists in 8.1 too, but it's
out of warranty.
We failed to record any dependency on the underlying table for an index
declared like "create index i on t (foo(t.*))". This would create trouble
if the table were dropped without previously dropping the index. To fix,
simplify some overly-cute code in index_create(), accepting the possibility
that sometimes the whole-table dependency will be redundant. Also document
this hazard in dependency.c. Per report from Kevin Grittner.
In passing, prevent a core dump in pg_get_indexdef() if the index's table
can't be found. I came across this while experimenting with Kevin's
example. Not sure it's a real issue when the catalogs aren't corrupt, but
might as well be cautious.
Back-patch to all supported versions.
A NestLoopParam's value can only be a Var or Aggref, but this isn't the
case in general for SubPlan parameters, so print_parameter_expr had better
be prepared to cope. Brain fade in my recent patch to print the referenced
expression instead of just printing $N for PARAM_EXEC Params. Per report
from Pavel Stehule.
This patch eliminates various bizarre behaviors caused by sloppy thinking
about the difference between a domain type and its underlying array type.
In particular, the operation of updating one element of such an array
has to be considered as yielding a value of the underlying array type,
*not* a value of the domain, because there's no assurance that the
domain's CHECK constraints are still satisfied. If we're intending to
store the result back into a domain column, we have to re-cast to the
domain type so that constraints are re-checked.
For similar reasons, such a domain can't be blindly matched to an ANYARRAY
polymorphic parameter, because the polymorphic function is likely to apply
array-ish operations that could invalidate the domain constraints. For the
moment, we just forbid such matching. We might later wish to insert an
automatic downcast to the underlying array type, but such a change should
also change matching of domains to ANYELEMENT for consistency.
To ensure that all such logic is rechecked, this patch removes the original
hack of setting a domain's pg_type.typelem field to match its base type;
the typelem will always be zero instead. In those places where it's really
okay to look through the domain type with no other logic changes, use the
newly added get_base_element_type function in place of get_element_type.
catversion bumped due to change in pg_type contents.
Per bug #5717 from Richard Huxton and subsequent discussion.
This is not the hoped-for facility of using INSERT/UPDATE/DELETE inside
a WITH, but rather the other way around. It seems useful in its own
right anyway.
Note: catversion bumped because, although the contents of stored rules
might look compatible, there's actually a subtle semantic change.
A single Query containing a WITH and INSERT...VALUES now represents
writing the WITH before the INSERT, not before the VALUES. While it's
not clear that that matters to anyone, it seems like a good idea to
have it cited in the git history for catversion.h.
Original patch by Marko Tiikkaja, with updating and cleanup by
Hitoshi Harada.
This patch eliminates the former need to sort the output of an Append scan
when an ordered scan of an inheritance tree is wanted. This should be
particularly useful for fast-start cases such as queries with LIMIT.
Original patch by Greg Stark, with further hacking by Hans-Jurgen Schonig,
Robert Haas, and Tom Lane.
This patch adds the SQL-standard concept of an INSTEAD OF trigger, which
is fired instead of performing a physical insert/update/delete. The
trigger function is passed the entire old and/or new rows of the view,
and must figure out what to do to the underlying tables to implement
the update. So this feature can be used to implement updatable views
using trigger programming style rather than rule hacking.
In passing, this patch corrects the names of some columns in the
information_schema.triggers view. It seems the SQL committee renamed
them somewhere between SQL:99 and SQL:2003.
Dean Rasheed, reviewed by Bernd Helmle; some additional hacking by me.
and the editor's cursor will be initially placed on that line. In \e the
lines are counted with respect to the query buffer, while in \ef they are
counted with line 1 = first line of function body. These choices are useful
for positioning the cursor on the line of a previously-reported error.
To avoid assumptions about what switch the user's editor takes for this
purpose, invent a new psql variable EDITOR_LINENUMBER_SWITCH with (at
present) no default value.
One incompatibility from previous behavior is that "\e 1234" will now
take "1234" as a line number not a file name. There are at least two
ways to select a numerically-named file if you really want to.
Pavel Stehule, reviewed by Jan Urbanski, with further editing by Robert Haas
and Tom Lane
I've added a quote_all_identifiers GUC which affects the behavior
of the backend, and a --quote-all-identifiers argument to pg_dump
and pg_dumpall which sets the GUC and also affects the quoting done
internally by those applications.
Design by Tom Lane; review by Alex Hunsaker; in response to bug #5488
filed by Hartmut Goebel.
rather than just $N. This brings the display of nestloop-inner-indexscan
plans back to where it's been, and incidentally improves the display of
SubPlan parameters as well. In passing, simplify the EXPLAIN code by
having it deal primarily in the PlanState tree rather than separately
searching Plan and PlanState trees. This is noticeably cleaner for
subplans, and about a wash elsewhere.
One small difference from previous behavior is that EXPLAIN will no longer
qualify local variable references in inner-indexscan plan nodes, since it
no longer sees such nodes as possibly referencing multiple tables. Vars
referenced through PARAM_EXEC Params are still forcibly qualified, though,
so I don't think the display is any more confusing than before. Adjust a
couple of examples in the documentation to match this behavior.
resjunk outputs of subquery tlists, instead of throwing an error. Per bug
#5548 from Daniel Grace.
We might at some point find we ought to back-patch this further than 9.0,
but I think that such Vars can only occur as resjunk members of upper-level
tlists, in which case the problem can't arise because prior versions didn't
print resjunk tlist items in EXPLAIN VERBOSE.
"val AS name" to "name := val", as per recent discussion.
This patch catches everything in the original named-parameters patch,
but I'm not certain that no other dependencies snuck in later (grepping
the source tree for all uses of AS soon proved unworkable).
In passing I note that we've dropped the ball at least once on keeping
ecpg's lexer (as opposed to parser) in sync with the backend. It would
be a good idea to go through all of pgc.l and see if it's in sync now.
I didn't attempt that at the moment.
ArrayRef expressions that are not in the immediate context of an INSERT or
UPDATE targetlist. Such cases never arise in stored rules, so ruleutils.c
hadn't tried to handle them. However, they do occur in the targetlists of
plans derived from such statements, and now that EXPLAIN VERBOSE tries to
print targetlists, we need some way to deal with the case.
I chose to represent an assignment ArrayRef as "array[subscripts] := source",
which is fairly reasonable and doesn't omit any information. However,
FieldStore is problematic because the planner will fold multiple assignments
to fields of the same composite column into one FieldStore, resulting in a
structure that is hard to understand at all, let alone display comprehensibly.
So in that case I punted and just made it print the source expression(s).
Backpatch to 8.4 --- the lack of functionality exists in older releases,
but doesn't seem to be important for lack of anything that would call it.
In addition, add support for a "payload" string to be passed along with
each notify event.
This implementation should be significantly more efficient than the old one,
and is also more compatible with Hot Standby usage. There is not yet any
facility for HS slaves to receive notifications generated on the master,
although such a thing is possible in future.
Joachim Wieland, reviewed by Jeff Davis; also hacked on by me.
The purpose of this change is to eliminate the need for every caller
of SearchSysCache, SearchSysCacheCopy, SearchSysCacheExists,
GetSysCacheOid, and SearchSysCacheList to know the maximum number
of allowable keys for a syscache entry (currently 4). This will
make it far easier to increase the maximum number of keys in a
future release should we choose to do so, and it makes the code
shorter, too.
Design and review by Tom Lane.
This patch allows the frame to start from CURRENT ROW (in either RANGE or
ROWS mode), and it also adds support for ROWS n PRECEDING and ROWS n FOLLOWING
start and end points. (RANGE value PRECEDING/FOLLOWING isn't there yet ---
the grammar works, but that's all.)
Hitoshi Harada, reviewed by Pavel Stehule
pg_constraint before searching pg_trigger. This allows saner handling of
corner cases; in particular we now say "constraint is not deferrable"
rather than "constraint does not exist" when the command is applied to
a constraint that's inherently non-deferrable. Per a gripe several months
ago from hubert depesz lubaczewski.
To make this work without breaking user-defined constraint triggers,
we have to add entries for them to pg_constraint. However, in return
we can remove the pgconstrname column from pg_constraint, which represents
a fairly sizable space savings. I also replaced the tgisconstraint column
with tgisinternal; the old meaning of tgisconstraint can now be had by
testing for nonzero tgconstraint, while there is no other way to get
the old meaning of nonzero tgconstraint, namely that the trigger was
internally generated rather than being user-created.
In passing, fix an old misstatement in the docs and comments, namely that
pg_trigger.tgdeferrable is exactly redundant with pg_constraint.condeferrable.
Actually, we mark RI action triggers as nondeferrable even when they belong to
a nominally deferrable FK constraint. The SET CONSTRAINTS code now relies on
that instead of hard-coding a list of exception OIDs.
non-kluge method for controlling the order in which values are fed to an
aggregate function. At the same time eliminate the old implementation
restriction that DISTINCT was only supported for single-argument aggregates.
Possibly release-notable behavioral change: formerly, agg(DISTINCT x)
dropped null values of x unconditionally. Now, it does so only if the
agg transition function is strict; otherwise nulls are treated as DISTINCT
normally would, ie, you get one copy.
Andrew Gierth, reviewed by Hitoshi Harada
support any indexable commutative operator, not just equality. Two rows
violate the exclusion constraint if "row1.col OP row2.col" is TRUE for
each of the columns in the constraint.
Jeff Davis, reviewed by Robert Haas
checked to determine whether the trigger should be fired.
For BEFORE triggers this is mostly a matter of spec compliance; but for AFTER
triggers it can provide a noticeable performance improvement, since queuing of
a deferred trigger event and re-fetching of the row(s) at end of statement can
be short-circuited if the trigger does not need to be fired.
Takahiro Itagaki, reviewed by KaiGai Kohei.
it works just as well to have them be ordinary identifiers, and this gets rid
of a number of ugly special cases. Plus we aren't interfering with non-rule
usage of these names.
catversion bump because the names change internally in stored rules.
adding the ModifyTable node type --- I had been thinking ModifyTable should
replace Append as a special case in push_plan(), but actually both of them
have to be special-cased.
when FOR UPDATE is propagated down into a sub-select expanded from a view.
Similar bug to parser's isLockedRel issue that I fixed yesterday; likewise
seems not quite worth the effort to back-patch.
underneath the Limit node, not atop it. This fixes the old problem that such
a query might unexpectedly return fewer rows than the LIMIT says, due to
LockRows discarding updated rows.
There is a related problem that LockRows might destroy the sort ordering
produced by earlier steps; but fixing that by pushing LockRows below Sort
would create serious performance problems that are unjustified in many
real-world applications, as well as potential deadlock problems from locking
many more rows than expected. Instead, keep the present semantics of applying
FOR UPDATE after ORDER BY within a single query level; but allow the user to
specify the other way by writing FOR UPDATE in a sub-select. To make that
work, track whether FOR UPDATE appeared explicitly in sub-selects or got
pushed down from the parent, and don't flatten a sub-select that contained an
explicit FOR UPDATE.
are named in the UPDATE's SET list.
Note: the schema of pg_trigger has not actually changed; we've just started
to use a column that was there all along. catversion bumped anyway so that
this commit is included in the history of potentially interesting changes
to system catalog contents.
Itagaki Takahiro
They are now handled by a new plan node type called ModifyTable, which is
placed at the top of the plan tree. In itself this change doesn't do much,
except perhaps make the handling of RETURNING lists and inherited UPDATEs a
tad less klugy. But it is necessary preparation for the intended extension of
allowing RETURNING queries inside WITH.
Marko Tiikkaja
Add a variant of pg_get_triggerdef with a second argument "pretty" that
causes the output to be formatted in the way pg_dump used to do. Use this
variant in pg_dump with server versions >= 8.5.
This insulates pg_dump from most future trigger feature additions, such as
the upcoming column triggers patch.
Author: Itagaki Takahiro <itagaki.takahiro@oss.ntt.co.jp>
values being complained of.
In passing, also remove the arbitrary length limitation in the similar
error detail message for foreign key violations.
Itagaki Takahiro
The current implementation fires an AFTER ROW trigger for each tuple that
looks like it might be non-unique according to the index contents at the
time of insertion. This works well as long as there aren't many conflicts,
but won't scale to massive unique-key reassignments. Improving that case
is a TODO item.
Dean Rasheed
This is believed to not change the output at all, with one known exception:
"Subquery Scan foo" becomes "Subquery Scan on foo". (We can fix that if
anyone complains, but it would be a wart, because the old code was clearly
inconsistent.) The main intention is to remove duplicate coding and
provide a cleaner base for subsequent EXPLAIN patching.
Robert Haas
This alters various incidental uses of C++ key words to use other similar
identifiers, so that a C++ compiler won't choke outright. You still
(probably) need extern "C" { }; around the inclusion of backend headers.
based on a patch by Kurt Harriman <harriman@acm.org>
Also add a script cpluspluscheck to check for C++ compatibility in the
future. As of right now, this passes without error for me.
Changes:
Pass in the keyword lookup array instead of having it be hardwired.
(This incidentally allows elimination of some duplicate coding in ecpg.)
Re-order the token declarations in gram.y so that non-keyword tokens have
numbers that won't change when keywords are added or removed.
Add ".." and ":=" to the set of tokens recognized by scan.l. (Since these
combinations are nowhere legal in core SQL, this does not change anything
except the precise wording of the error you get when you write this.)
distinction between the external API (parser.h) and declarations that only
need to be visible within the raw parser code (gramparse.h, which now is only
included by parser.c, gram.y, scan.l, and keywords.c). This is in preparation
for the upcoming change to a reentrant lexer, which will require referencing
YYSTYPE in the declarations of base_yylex and filtered_base_yylex, hence
gram.h will have to be included by gramparse.h. We don't want any more files
than absolutely necessary to depend on gram.h, so some cleanup is called for.
an expression that's not supposed to contain variables. Per discussion
with Gevik Babakhani, this eliminates the need for an ugly kluge (namely,
specifying some unrelated relation name). Remove one such kluge from
pg_dump.
are individually labeled, rather than just grouped under an "InitPlan"
or "SubPlan" heading. This in turn makes it possible for decompilation of
a subplan reference to usefully identify which subplan it's referencing.
I also made InitPlans identify which parameter symbol(s) they compute,
so that references to those parameters elsewhere in the plan tree can
be connected to the initplan that will be executed. Per a gripe from
Robert Haas about EXPLAIN output of a WITH query being inadequate,
plus some longstanding pet peeves of my own.
looks for a CaseTestExpr to figure out what the parser did, but it failed to
consider the possibility that an implicit coercion might be inserted above
the CaseTestExpr. This could result in an Assert failure in some cases
(but correct results if Asserts weren't enabled), or an "unexpected CASE WHEN
clause" error in other cases. Per report from Alan Li.
Back-patch to 8.1; problem doesn't exist before that because CASE was
implemented differently.
not include postgres.h nor anything else it doesn't directly need. Add
#includes to calling files as needed to compensate. Per my proposal of
yesterday.
This should be noted as a source code change in the 8.4 release notes,
since it's likely to require changes in add-on modules.
so that user-defined window functions are possible. For the moment you'll
have to write them in C, for lack of any interface to the WindowObject API
in the available PLs, but it's better than no support at all.
There was some debate about the best syntax for this. I ended up choosing
the "it's an attribute" position --- the other approach will inevitably be
more work, and the likely market for user-defined window functions is
probably too small to justify it.
patch. This includes the ability to force the frame to cover the whole
partition, and the ability to make the frame end exactly on the current row
rather than its last ORDER BY peer. Supporting any more of the full SQL
frame-clause syntax will require nontrivial hacking on the window aggregate
code, so it'll have to wait for 8.5 or beyond.
explicit cast to show the intended array type, we forgot to teach ruleutils.c
to print out such constructs properly. Found by noting bogus output from
recent changes in polymorphism regression test.
get_name_for_var_field didn't have enough context to interpret a reference to
a CTE query's output. Fixing this requires separate hacks for the regular
deparse case (pg_get_ruledef) and for the EXPLAIN case, since the available
context information is quite different. It's pretty nearly parallel to the
existing code for SUBQUERY RTEs, though. Also, add code to make sure we
qualify a relation name that matches a CTE name; else the CTE will mistakenly
capture the reference when reloading the rule.
In passing, fix a pre-existing problem with get_name_for_var_field not working
on variables in targetlists of SubqueryScan plan nodes. Although latent all
along, this wasn't a problem until we made EXPLAIN VERBOSE try to print
targetlists. To do this, refactor the deparse_context_for_plan API so that
the special case for SubqueryScan is all on ruleutils.c's side.
the column alias names of the RTE referenced by the Var to the RowExpr.
This is needed to allow ruleutils.c to correctly deparse FieldSelect nodes
referencing such a construct. Per my recent bug report.
Adding a field to RowExpr forces initdb (because of stored rules changes)
so this solution is not back-patchable; which is unfortunate because 8.2
and 8.3 have this issue. But it only affects EXPLAIN for some pretty odd
corner cases, so we can probably live without a solution for the back
branches.
There are some unimplemented aspects: recursive queries must use UNION ALL
(should allow UNION too), and we don't have SEARCH or CYCLE clauses.
These might or might not get done for 8.4, but even without them it's a
pretty useful feature.
There are also a couple of small loose ends and definitional quibbles,
which I'll send a memo about to pgsql-hackers shortly. But let's land
the patch now so we can get on with other development.
Yoshiyuki Asaba, with lots of help from Tatsuo Ishii and Tom Lane
for editing if no function name is specified. This seems a much cleaner way
to offer that functionality than the original patch had. In passing,
de-clutter the error displays that are given for a bogus function-name
argument, and standardize on "$function$" as the default delimiter for the
function body. (The original coding would use the shortest possible
dollar-quote delimiter, which seems to create unnecessarily high risk of
later conflicts with the user-modified function body.)
In support of that, create a backend function pg_get_functiondef().
The psql command is functional but maybe a bit rough around the edges...
Abhijit Menon-Sen
into nodes/nodeFuncs, so as to reduce wanton cross-subsystem #includes inside
the backend. There's probably more that should be done along this line,
but this is a start anyway.
subqueries into the same thing you'd have gotten from IN (except always with
unknownEqFalse = true, so as to get the proper semantics for an EXISTS).
I believe this fixes the last case within CVS HEAD in which an EXISTS could
give worse performance than an equivalent IN subquery.
The tricky part of this is that if the upper query probes the EXISTS for only
a few rows, the hashing implementation can actually be worse than the default,
and therefore we need to make a cost-based decision about which way to use.
But at the time when the planner generates plans for subqueries, it doesn't
really know how many times the subquery will be executed. The least invasive
solution seems to be to generate both plans and postpone the choice until
execution. Therefore, in a query that has been optimized this way, EXPLAIN
will show two subplans for the EXISTS, of which only one will actually get
executed.
There is a lot more that could be done based on this infrastructure: in
particular it's interesting to consider switching to the hash plan if we start
out using the non-hashed plan but find a lot more upper rows going by than we
expected. I have therefore left some minor inefficiencies in place, such as
initializing both subplans even though we will currently only use one.
as per my recent proposal:
1. Fold SortClause and GroupClause into a single node type SortGroupClause.
We were already relying on them to be struct-equivalent, so using two node
tags wasn't accomplishing much except to get in the way of comparing items
with equal().
2. Add an "eqop" field to SortGroupClause to carry the associated equality
operator. This is cheap for the parser to get at the same time it's looking
up the sort operator, and storing it eliminates the need for repeated
not-so-cheap lookups during planning. In future this will also let us
represent GROUP/DISTINCT operations on datatypes that have hash opclasses
but no btree opclasses (ie, they have equality but no natural sort order).
The previous representation simply didn't work for that, since its only
indicator of comparison semantics was a sort operator.
3. Add a hasDistinctOn boolean to struct Query to explicitly record whether
the distinctClause came from DISTINCT or DISTINCT ON. This allows removing
some complicated and not 100% bulletproof code that attempted to figure
that out from the distinctClause alone.
This patch doesn't in itself create any new capability, but it's necessary
infrastructure for future attempts to use hash-based grouping for DISTINCT
and UNION/INTERSECT/EXCEPT.
need to deconstruct proargmodes for each pg_proc entry inspected by
FuncnameGetCandidates(). Fixes function lookup performance regression
caused by yesterday's variadic-functions patch.
In passing, make pg_proc.probin be NULL, rather than a dummy value '-',
in cases where it is not actually used for the particular type of function.
This should buy back some of the space cost of the extra column.
so long as all the trailing arguments are of the same (non-array) type.
The function receives them as a single array argument (which is why they
have to all be the same type).
It might be useful to extend this facility to aggregates, but this patch
doesn't do that.
This patch imposes a noticeable slowdown on function lookup --- a follow-on
patch will fix that by adding a redundant column to pg_proc.
Pavel Stehule
This is needed because :: casting binds more tightly than minus, so for
example -1::integer is not the same as (-1)::integer, and there are cases
where the difference is important. In particular this caused a failure
in SELECT DISTINCT ... ORDER BY ... where expressions that should have
matched were seen as different by the parser; but I suspect that there
could be other cases where failure to parenthesize leads to subtler
semantic differences in reloaded rules. Per report from Alexandr Popov.
unnecessary #include lines in it. Also, move some tuple routine prototypes and
macros to htup.h, which allows removal of heapam.h inclusion from some .c
files.
For this to work, a new header file access/sysattr.h needed to be created,
initially containing attribute numbers of system columns, for pg_dump usage.
While at it, make contrib ltree, intarray and hstore header files more
consistent with our header style.
strings. This patch introduces four support functions cstring_to_text,
cstring_to_text_with_len, text_to_cstring, and text_to_cstring_buffer, and
two macros CStringGetTextDatum and TextDatumGetCString. A number of
existing macros that provided variants on these themes were removed.
Most of the places that need to make such conversions now require just one
function or macro call, in place of the multiple notational layers that used
to be needed. There are no longer any direct calls of textout or textin,
and we got most of the places that were using handmade conversions via
memcpy (there may be a few still lurking, though).
This commit doesn't make any serious effort to eliminate transient memory
leaks caused by detoasting toasted text objects before they reach
text_to_cstring. We changed PG_GETARG_TEXT_P to PG_GETARG_TEXT_PP in a few
places where it was easy, but much more could be done.
Brendan Jurd and Tom Lane
constant ORDER/GROUP BY entries properly:
http://archives.postgresql.org/pgsql-hackers/2001-04/msg00457.php
The original solution to that was in fact no good, as demonstrated by
today's report from Martin Pitt:
http://archives.postgresql.org/pgsql-bugs/2008-01/msg00027.php
We can't use the column-number-reference format for a constant that is
a resjunk targetlist entry, a case that was unfortunately not thought of
in the original discussion. What we can do instead (which did not work
at the time, but does work in 7.3 and up) is to emit the constant with
explicit ::typename decoration, even if it otherwise wouldn't need it.
This is sufficient to keep the parser from thinking it's a column number
reference, and indeed is probably what the user must have done to get
such a thing into the querytree in the first place.
print the index key variable or expression for that column. It was mistakenly
printing ASC/DESC/NULLS FIRST/NULLS LAST decoration too --- and not only for
the target column, but all columns. Someday we should have an option to
extract that info (and the opclass decoration as well) for a single index
column ... but today is not that day. Per bug #3829 and subsequent
discussion.
constraint status of copied indexes (bug #3774), as well as various other
small bugs such as failure to pstrdup when needed. Allow INCLUDING INDEXES
indexes to be merged with identical declared indexes (perhaps not real useful,
but the code is there and having it not apply to LIKE indexes seems pretty
unorthogonal). Avoid useless work in generateClonedIndexStmt(). Undo some
poorly chosen API changes, and put a couple of routines in modules that seem
to be better places for them.
it affects. The original coding neglected tablespace entirely (causing
the indexes to move to the database's default tablespace) and for an index
belonging to a UNIQUE or PRIMARY KEY constraint, it would actually try to
assign the parent table's reloptions to the index :-(. Per bug #3672 and
subsequent investigation.
8.0 and 8.1 did not have reloptions, but the tablespace bug is present.
unreserved according to the grammar. The list of unreserved words has gotten
extensive enough that the unnecessary quoting is becoming a bit of an eyesore.
To do this, add knowledge of the keyword category to keywords.c's table.
(Someday we might be able to generate keywords.c's table and the keyword lists
in gram.y from a common source.) For the moment, lie about WITH's status in
the table so it will still get quoted --- this is because of the expectation
that WITH will become reserved when the SQL recursive-queries patch gets done.
I didn't force initdb because this affects nothing on-disk; but note that a
few regression tests have changed expected output.
with a plpgsql-defined cursor. The underlying mechanism for this is that the
main SQL engine will now take "WHERE CURRENT OF $n" where $n is a refcursor
parameter. Not sure if we should document that fact or consider it an
implementation detail. Per discussion with Pavel Stehule.
Along the way, allow FOR UPDATE in non-WITH-HOLD cursors; there may once
have been a reason to disallow that, but it seems to work now, and it's
really rather necessary if you want to select a row via a cursor and then
update it in a concurrent-safe fashion.
Original patch by Arul Shaji, rather heavily editorialized by Tom Lane.
Tom Lane
Bruce Momjian
Robert Haas
Alvaro Herrera
Peter Eisentraut
Magnus Hagander
Itagaki Takahiro
Neil Conway