This adds a new executor node named TID Range Scan. The query planner
will generate paths for TID Range scans when quals are discovered on base
relations which search for ranges on the table's ctid column. These
ranges may be open at either end. For example, WHERE ctid >= '(10,0)';
will return all tuples on page 10 and over.
To support this, two new optional callback functions have been added to
table AM. scan_set_tidrange is used to set the scan range to just the
given range of TIDs. scan_getnextslot_tidrange fetches the next tuple
in the given range.
For AMs were scanning ranges of TIDs would not make sense, these functions
can be set to NULL in the TableAmRoutine. The query planner won't
generate TID Range Scan Paths in that case.
Author: Edmund Horner, David Rowley
Reviewed-by: David Rowley, Tomas Vondra, Tom Lane, Andres Freund, Zhihong Yu
Discussion: https://postgr.es/m/CAMyN-kB-nFTkF=VA_JPwFNo08S0d-Yk0F741S2B7LDmYAi8eyA@mail.gmail.com
Teach VACUUM VERBOSE to report on pages deleted by the _current_ VACUUM
operation -- these are newly deleted pages. VACUUM VERBOSE continues to
report on the total number of deleted pages in the entire index (no
change there). The former is a subset of the latter.
The distinction between each category of deleted index page only arises
with index AMs where page deletion is supported and is decoupled from
page recycling for performance reasons.
This is follow-up work to commit e5d8a999, which made nbtree store
64-bit XIDs (not 32-bit XIDs) in pages at the point at which they're
deleted. Note that the btm_last_cleanup_num_delpages metapage field
added by that commit usually gets set to pages_newly_deleted. The
exceptions (the scenarios in which they're not equal) all seem to be
tricky cases for the implementation (of page deletion and recycling) in
general.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WznpdHvujGUwYZ8sihX%3Dd5u-tRYhi-F4wnV2uN2zHpMUXw%40mail.gmail.com
Otherwise we risk "leaking" deleted pages by making them non-recyclable
indefinitely. Commit 6655a729 did the same thing for deleted pages in
GiST indexes. That work was used as a starting point here.
Stop storing an XID indicating the oldest bpto.xact across all deleted
though unrecycled pages in nbtree metapages. There is no longer any
reason to care about that condition/the oldest XID. It only ever made
sense when wraparound was something _bt_vacuum_needs_cleanup() had to
consider.
The btm_oldest_btpo_xact metapage field has been repurposed and renamed.
It is now btm_last_cleanup_num_delpages, which is used to remember how
many non-recycled deleted pages remain from the last VACUUM (in practice
its value is usually the precise number of pages that were _newly
deleted_ during the specific VACUUM operation that last set the field).
The general idea behind storing btm_last_cleanup_num_delpages is to use
it to give _some_ consideration to non-recycled deleted pages inside
_bt_vacuum_needs_cleanup() -- though never too much. We only really
need to avoid leaving a truly excessive number of deleted pages in an
unrecycled state forever. We only do this to cover certain narrow cases
where no other factor makes VACUUM do a full scan, and yet the index
continues to grow (and so actually misses out on recycling existing
deleted pages).
These metapage changes result in a clear user-visible benefit: We no
longer trigger full index scans during VACUUM operations solely due to
the presence of only 1 or 2 known deleted (though unrecycled) blocks
from a very large index. All that matters now is keeping the costs and
benefits in balance over time.
Fix an issue that has been around since commit 857f9c36, which added the
"skip full scan of index" mechanism (i.e. the _bt_vacuum_needs_cleanup()
logic). The accuracy of btm_last_cleanup_num_heap_tuples accidentally
hinged upon _when_ the source value gets stored. We now always store
btm_last_cleanup_num_heap_tuples in btvacuumcleanup(). This fixes the
issue because IndexVacuumInfo.num_heap_tuples (the source field) is
expected to accurately indicate the state of the table _after_ the
VACUUM completes inside btvacuumcleanup().
A backpatchable fix cannot easily be extracted from this commit. A
targeted fix for the issue will follow in a later commit, though that
won't happen today.
I (pgeoghegan) have chosen to remove any mention of deleted pages in the
documentation of the vacuum_cleanup_index_scale_factor GUC/param, since
the presence of deleted (though unrecycled) pages is no longer of much
concern to users. The vacuum_cleanup_index_scale_factor description in
the docs now seems rather unclear in any case, and it should probably be
rewritten in the near future. Perhaps some passing mention of page
deletion will be added back at the same time.
Bump XLOG_PAGE_MAGIC due to nbtree WAL records using full XIDs now.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznpdHvujGUwYZ8sihX=d5u-tRYhi-F4wnV2uN2zHpMUXw@mail.gmail.com
Commit 866e24d47d added an assert that HEAP_XMAX_LOCK_ONLY and
HEAP_KEYS_UPDATED cannot appear together, on the faulty assumption that
the latter necessarily referred to an update and not a tuple lock; but
that's wrong, because SELECT FOR UPDATE can use precisely that
combination, as evidenced by the amcheck test case added here.
Remove the Assert(), and also patch amcheck's verify_heapam.c to not
complain if the combination is found. Also, out of overabundance of
caution, update (across all branches) README.tuplock to be more explicit
about this.
Author: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Mahendra Singh Thalor <mahi6run@gmail.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Discussion: https://postgr.es/m/20210124061758.GA11756@nol
Pavan Deolasee recently noted that a few of the
HeapTupleHeaderIndicatesMovedPartitions calls added by commit
5db6df0c01 are useless, since they are done after comparing t_self
with t_ctid. But because t_self can never be set to the magical values
that indicate that the tuple moved partition, this can never succeed: if
the first test fails (so we know t_self equals t_ctid), necessarily the
second test will also fail.
So these checks can be removed and no harm is done. There's no bug
here, just a code legibility issue.
Reported-by: Pavan Deolasee <pavan.deolasee@gmail.com>
Discussion: https://postgr.es/m/20200929164411.GA15497@alvherre.pgsql
Commit 46d6e5f567 added the atomic variable "waitStart" into PGPROC struct,
to store the time at which wait for lock acquisition started. Previously
this variable was initialized every time each backend started. Instead,
this commit makes postmaster initialize it at the startup, to ensure that
the variable should be initialized before any use of it.
This commit also moves the code to initialize "waitStart" variable for
prepare transaction, from TwoPhaseGetDummyProc() to MarkAsPreparingGuts().
Because MarkAsPreparingGuts() is more proper place to do that since
it initializes other PGPROC variables.
Author: Fujii Masao
Reviewed-by: Atsushi Torikoshi
Discussion: https://postgr.es/m/1df88660-6f08-cc6e-b7e2-f85296a2bdab@oss.nttdata.com
This commit fixes COMMIT AND CHAIN command so that it starts new transaction
immediately even if savepoints are defined within the transaction to commit.
Previously COMMIT AND CHAIN command did not in that case because
commit 280a408b48 forgot to make CommitTransactionCommand() handle
a transaction chaining when the transaction state was TBLOCK_SUBCOMMIT.
Also this commit adds the regression test for COMMIT AND CHAIN command
when savepoints are defined.
Back-patch to v12 where transaction chaining was added.
Reported-by: Arthur Nascimento
Author: Fujii Masao
Reviewed-by: Arthur Nascimento, Vik Fearing
Discussion: https://postgr.es/m/16867-3475744069228158@postgresql.org
Consolidate discussion of how VACUUM places pages in the FSM for
recycling by adding a new section that comes after discussion of page
deletion. This structure reflects the fact that page recycling is
explicitly decoupled from page deletion in Lanin & Shasha's paper. Page
recycling in nbtree is an implementation of what the paper calls "the
drain technique".
This decoupling is an important concept for nbtree VACUUM. Searchers
have to detect and recover from concurrent page deletions, but they will
never have to reason about concurrent page recycling. Recycling can
almost always be thought of as a low level garbage collection operation
that asynchronously frees the physical space that backs a logical tree
node. Almost all code need only concern itself with logical tree nodes.
(Note that "logical tree node" is not currently a term of art in the
nbtree code -- this all works implicitly.)
This is preparation for an upcoming patch that teaches nbtree VACUUM to
remember the details of pages that it deletes on the fly, in local
memory. This enables the same VACUUM operation to consider placing its
own deleted pages in the FSM later on, when it reaches the end of
btvacuumscan().
Discuss VACUUM's linear scan after discussion of tuple deletion by
VACUUM, but before discussion of page deletion by VACUUM. This
progression is a lot more natural.
Also tweak the wording a little. It seems unnecessary to talk about how
it worked prior to PostgreSQL 8.2.
Both luckily and unluckily the passed values meant the same for all
types. Luckily because that meant my confusion caused no harm,
unluckily because otherwise the compiler might have warned...
In passing, synchronize parameter names between definition and
declaration.
Reported-By: Peter Geoghegan <pg@bowt.ie>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAH2-Wz=L=nBoepQdH9b5Qd0nMvepFT2CnT6sjWvvpOXa=K8HVQ@mail.gmail.com
This commit adds new column "waitstart" into pg_locks view. This column
reports the time when the server process started waiting for the lock
if the lock is not held. This information is useful, for example, when
examining the amount of time to wait on a lock by subtracting
"waitstart" in pg_locks from the current time, and identify the lock
that the processes are waiting for very long.
This feature uses the current time obtained for the deadlock timeout
timer as "waitstart" (i.e., the time when this process started waiting
for the lock). Since getting the current time newly can cause overhead,
we reuse the already-obtained time to avoid that overhead.
Note that "waitstart" is updated without holding the lock table's
partition lock, to avoid the overhead by additional lock acquisition.
This can cause "waitstart" in pg_locks to become NULL for a very short
period of time after the wait started even though "granted" is false.
This is OK in practice because we can assume that users are likely to
look at "waitstart" when waiting for the lock for a long time.
The first attempt of this patch (commit 3b733fcd04) caused the buildfarm
member "rorqual" (built with --disable-atomics --disable-spinlocks) to report
the failure of the regression test. It was reverted by commit 890d2182a2.
The cause of this failure was that the atomic variable for "waitstart"
in the dummy process entry created at the end of prepare transaction was
not initialized. This second attempt fixes that issue.
Bump catalog version.
Author: Atsushi Torikoshi
Reviewed-by: Ian Lawrence Barwick, Robert Haas, Justin Pryzby, Fujii Masao
Discussion: https://postgr.es/m/a96013dc51cdc56b2a2b84fa8a16a993@oss.nttdata.com
For the initial table data synchronization in logical replication, we use
a single transaction to copy the entire table and then synchronize the
position in the stream with the main apply worker.
There are multiple downsides of this approach: (a) We have to perform the
entire copy operation again if there is any error (network breakdown,
error in the database operation, etc.) while we synchronize the WAL
position between tablesync worker and apply worker; this will be onerous
especially for large copies, (b) Using a single transaction in the
synchronization-phase (where we can receive WAL from multiple
transactions) will have the risk of exceeding the CID limit, (c) The slot
will hold the WAL till the entire sync is complete because we never commit
till the end.
This patch solves all the above downsides by allowing multiple
transactions during the tablesync phase. The initial copy is done in a
single transaction and after that, we commit each transaction as we
receive. To allow recovery after any error or crash, we use a permanent
slot and origin to track the progress. The slot and origin will be removed
once we finish the synchronization of the table. We also remove slot and
origin of tablesync workers if the user performs DROP SUBSCRIPTION .. or
ALTER SUBSCRIPTION .. REFERESH and some of the table syncs are still not
finished.
The commands ALTER SUBSCRIPTION ... REFRESH PUBLICATION and
ALTER SUBSCRIPTION ... SET PUBLICATION ... with refresh option as true
cannot be executed inside a transaction block because they can now drop
the slots for which we have no provision to rollback.
This will also open up the path for logical replication of 2PC
transactions on the subscriber side. Previously, we can't do that because
of the requirement of maintaining a single transaction in tablesync
workers.
Bump catalog version due to change of state in the catalog
(pg_subscription_rel).
Author: Peter Smith, Amit Kapila, and Takamichi Osumi
Reviewed-by: Ajin Cherian, Petr Jelinek, Hou Zhijie and Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1KHJxaZS-fod-0fey=0tq3=Gkn4ho=8N4-5HWiCfu0H1A@mail.gmail.com
The pages_removed field is no longer used for anything. It hasn't been
possible for an index to physically shrink since old-style VACUUM FULL
was removed by commit 0a469c87.
If a cross-partition UPDATE violates a constraint on the target partition,
and the columns in the new partition are in different physical order than
in the parent, the error message can reveal columns that the user does not
have SELECT permission on. A similar bug was fixed earlier in commit
804b6b6db4.
The cause of the bug is that the callers of the
ExecBuildSlotValueDescription() function got confused when constructing
the list of modified columns. If the tuple was routed from a parent, we
converted the tuple to the parent's format, but the list of modified
columns was grabbed directly from the child's RTE entry.
ExecUpdateLockMode() had a similar issue. That lead to confusion on which
columns are key columns, leading to wrong tuple lock being taken on tables
referenced by foreign keys, when a row is updated with INSERT ON CONFLICT
UPDATE. A new isolation test is added for that corner case.
With this patch, the ri_RangeTableIndex field is no longer set for
partitions that don't have an entry in the range table. Previously, it was
set to the RTE entry of the parent relation, but that was confusing.
NOTE: This modifies the ResultRelInfo struct, replacing the
ri_PartitionRoot field with ri_RootResultRelInfo. That's a bit risky to
backpatch, because it breaks any extensions accessing the field. The
change that ri_RangeTableIndex is not set for partitions could potentially
break extensions, too. The ResultRelInfos are visible to FDWs at least,
and this patch required small changes to postgres_fdw. Nevertheless, this
seem like the least bad option. I don't think these fields widely used in
extensions; I don't think there are FDWs out there that uses the FDW
"direct update" API, other than postgres_fdw. If there is, you will get a
compilation error, so hopefully it is caught quickly.
Backpatch to 11, where support for both cross-partition UPDATEs, and unique
indexes on partitioned tables, were added.
Reviewed-by: Amit Langote
Security: CVE-2021-3393
GlobalVisIsRemovableFullXid() is now GlobalVisCheckRemovableFullXid().
This is consistent with the general convention for FullTransactionId
equivalents of functions that deal with TransactionId values. It now
matches the nearby GlobalVisCheckRemovableXid() function, which performs
the same check for callers that use TransactionId values.
Oversight in commit dc7420c2c9.
Discussion: https://postgr.es/m/CAH2-Wzmes12jFNDcVgpU89Vp=r6uLFrE-MT0fjSWGsE70UiNaA@mail.gmail.com
Add some additional defensive checks in the second phase of index
deletion to detect and report index corruption during VACUUM, and to
avoid having VACUUM become stuck in more cases. The code is still not
robust in the presence of a circular chain of sibling links, though it's
not clear whether that really matters. This is follow-up work to commit
3a01f68e.
The new defensive checks rely on the assumption that there can be no
more than one VACUUM operation running for an index at any given time.
Remove an old comment suggesting that multiple concurrent VACUUMs need
to be considered here. This concern now seems highly unlikely to have
any real validity, since we clearly rely on the same assumption in
several other places. For example, there are much more recent comments
that appear in the same function (added by commit efada2b8e9) that make
the same assumption.
Also add a CHECK_FOR_INTERRUPTS() to the relevant code path. Contrary
to comments added by commit 3a01f68e, it is actually possible to handle
interrupts here, at least in the common case where processing takes
place at the leaf level. We only hold a pin on leafbuf/target page when
stepping right at the leaf level.
No backpatch due to the lack of complaints following hardening added to
the same area by commit 3a01f68e.
The prototype calls the second argument of
pgstat_progress_update_multi_param() "index", and some callers name
their local variable that way. But when the surrounding code deals
with index relations, this is confusing, and in at least one case
shadowed another variable that is referring to an index relation.
Adjust those call sites to have clearer local variable naming, similar
to existing callers in indexcmds.c.
The latestRemovedXid values used by nbtree deletion operations are
determined by _bt_delitems_delete()'s caller, so there is no reason to
pass a separate heapRel argument.
Oversight in commit d168b66682.
pg_standby was useful more than a decade ago, but now it is obsolete.
It has been proposed that we retire it many times. Now seems like a
good time to finally do it, because "waiting restore commands"
are incompatible with a proposed recovery prefetching feature.
Discussion: https://postgr.es/m/20201029024412.GP5380%40telsasoft.com
Author: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Since the CLOG page number is not recorded directly in the checkpoint
record, we have to use ShmemVariableCache->nextXid to figure out the
latest CLOG page number at the start of recovery. However, as recovery
progresses, replay of CLOG/EXTEND records will update our notion of
the latest page number, and we should rely on that being accurate
rather than recomputing the value based on an updated notion of
nextXid. ShmemVariableCache->nextXid is only an approximation
during recovery anyway, whereas CLOG/EXTEND records are an
authoritative representation of how the SLRU has been updated.
Commit 0fcc2decd4 makes this
simplification possible, as before that change clog_redo() might
have injected a bogus value here, and we'd want to get rid of
that before entering normal running.
Patch by me, reviewed by Heikki Linnakangas.
Discussion: http://postgr.es/m/CA+TgmoZYig9+AQodhF5sRXuKkJ=RgFDugLr3XX_dz_F-p=TwTg@mail.gmail.com
The comment is no longer accurate, and hasn't been entirely accurate
since Hot Standby was introduced. The original idea here was that
StartupCLOG() wouldn't be called until the end of recovery and
therefore this value would be uninitialized when this code is reached,
but Hot Standby made that true only when hot_standby=off, and commit
1f113abdf8 means that this value is now
always initialized before replay even starts.
The original purpose of this code was to bypass the sanity check
in SimpleLruTruncate(), which will no longer occur: now, if something
is wrong, that sanity check might trip during recovery. That's
probably a good thing, because in the current code base
latest_page_number should always be initialized and therefore we
expect that the sanity check should pass. If it doesn't, something
has gone wrong, and complaining about it is appropriate.
Patch by me, reviewed by Heikki Linnakangas.
Discussion: http://postgr.es/m/CA+TgmoZYig9+AQodhF5sRXuKkJ=RgFDugLr3XX_dz_F-p=TwTg@mail.gmail.com
Previously, the hot_standby=off code path did this at end of recovery,
while the hot_standby=on code path did it at the beginning of recovery.
It's better to do this in only one place because (a) it's simpler,
(b) StartupCLOG() is trivial so trying to postpone the work isn't
useful, and (c) this will make it possible to simplify some other
logic.
Patch by me, reviewed by Heikki Linnakangas.
Discussion: http://postgr.es/m/CA+TgmoZYig9+AQodhF5sRXuKkJ=RgFDugLr3XX_dz_F-p=TwTg@mail.gmail.com
Avoid calling heap_index_delete_tuples() with an empty deltids array to
avoid an assertion failure.
This issue was arguably an oversight in commit b5f58cf2, though the
failing assert itself was added by my recent commit d168b666. No
backpatch, though, since the oversight is harmless in the back branches.
Author: Peter Geoghegan <pg@bowt.ie>
Reported-By: Jaime Casanova <jcasanov@systemguards.com.ec>
Discussion: https://postgr.es/m/CAJKUy5jscES84n3puE=sYngyF+zpb4wv8UMtuLnLPv5z=6yyNw@mail.gmail.com
Up until now, we've held this lock when performing a checkpoint or
restartpoint, but commit 076a055acf back
in 2004 and commit 7e48b77b1c from 2009,
taken together, have removed all need for this. In the present code,
there's only ever one process entitled to attempt a checkpoint: either
the checkpointer, during normal operation, or the postmaster, during
single-user operation. So, we don't need the lock.
One possible concern in making this change is that it means that
a substantial amount of code where HOLD_INTERRUPTS() was previously
in effect due to the preceding LWLockAcquire() will now be
running without that. This could mean that ProcessInterrupts()
gets called in places from which it didn't before. However, this
seems unlikely to do very much, because the checkpointer doesn't
have any signal mapped to die(), so it's not clear how,
for example, ProcDiePending = true could happen in the first
place. Similarly with ClientConnectionLost and recovery conflicts.
Also, if there are any such problems, we might want to fix them
rather than reverting this, since running lots of code with
interrupt handling suspended is generally bad.
Patch by me, per an inquiry by Amul Sul. Review by Tom Lane
and Michael Paquier.
Discussion: http://postgr.es/m/CAAJ_b97XnBBfYeSREDJorFsyoD1sHgqnNuCi=02mNQBUMnA=FA@mail.gmail.com
Both heapgettup() and heapgettup_pagemode() incorrectly set the first page
to scan in a backward scan in which the number of pages to scan was
specified by heap_setscanlimits(). The code incorrectly started the scan
at the end of the relation when startBlk was 0, or otherwise at
startBlk - 1, neither of which is correct when only scanning a subset of
pages.
The fix here checks if heap_setscanlimits() has changed the number of
pages to scan and if so we set the first page to scan as the final page in
the specified range during backward scans.
Proper adjustment of this code was forgotten when heap_setscanlimits() was
added in 7516f5259 back in 9.5. However, practice, nowhere in core code
performs backward scans after having used heap_setscanlimits(), yet, it is
possible an extension uses the heap functions in this way, hence
backpatch.
An upcoming patch does use heap_setscanlimits() with backward scans, so
this must be fixed before that can go in.
Author: David Rowley
Discussion: https://postgr.es/m/CAApHDvpGc9h0_oVD2CtgBcxCS1N-qDYZSeBRnUh+0CWJA9cMaA@mail.gmail.com
Backpatch-through: 9.5, all supported versions
This adds code omitted from commit 7db0cd2145 by accident, which had
two consequences. Firstly, only rows inserted by heap_multi_insert were
frozen as expected when running COPY FREEZE, while heap_insert left
rows unfrozen. That however includes rows in TOAST tables, so a lot of
data might have been left unfrozen. Secondly, page might have been left
partially empty after relcache invalidation.
This addresses both of those issues.
Discussion: https://postgr.es/m/CABOikdN-ptGv0mZntrK2Q8OtfUuAjqaYMGmkdU1dCKFtUxVLrg@mail.gmail.com
In commit 9eb5607e69, I got the condition on checking for split or
deleted page wrong: I used && instead of ||. The comment correctly said
"concurrent split _or_ deletion".
As a result, GiST insertion could miss a concurrent split, and insert to
wrong page. Duncan Sands demonstrated this with a test script that did a
lot of concurrent inserts.
Backpatch to v12, where this was introduced. REINDEX is required to fix
indexes that were affected by this bug.
Backpatch-through: 12
Reported-by: Duncan Sands
Discussion: https://www.postgresql.org/message-id/a9690483-6c6c-3c82-c8ba-dc1a40848f11%40deepbluecap.com
When certain parameters are changed on a physical replication primary,
this is communicated to standbys using the XLOG_PARAMETER_CHANGE WAL
record. The standby then checks whether its own settings are at least
as big as the ones on the primary. If not, the standby shuts down
with a fatal error.
This patch changes this behavior for hot standbys to pause recovery at
that point instead. That allows read traffic on the standby to
continue while database administrators figure out next steps. When
recovery is unpaused, the server shuts down (as before). The idea is
to fix the parameters while recovery is paused and then restart when
there is a maintenance window.
Reviewed-by: Sergei Kornilov <sk@zsrv.org>
Discussion: https://www.postgresql.org/message-id/flat/4ad69a4c-cc9b-0dfe-0352-8b1b0cd36c7b@2ndquadrant.com
Make sure COPY FREEZE marks the pages as PD_ALL_VISIBLE and updates the
visibility map. Until now we only marked individual tuples as frozen,
but page-level flags were not updated, so the first VACUUM after the
COPY FREEZE had to rewrite the whole table.
This is a fairly old patch, and multiple people worked on it. The first
version was written by Jeff Janes, and then reworked by Pavan Deolasee
and Anastasia Lubennikova.
Author: Anastasia Lubennikova, Pavan Deolasee, Jeff Janes
Reviewed-by: Kuntal Ghosh, Jeff Janes, Tomas Vondra, Masahiko Sawada,
Andres Freund, Ibrar Ahmed, Robert Haas, Tatsuro Ishii,
Darafei Praliaskouski
Discussion: https://postgr.es/m/CABOikdN-ptGv0mZntrK2Q8OtfUuAjqaYMGmkdU1dCKFtUxVLrg@mail.gmail.com
Discussion: https://postgr.es/m/CAMkU%3D1w3osJJ2FneELhhNRLxfZitDgp9FPHee08NT2FQFmz_pQ%40mail.gmail.com
Every core SLRU wraps around. With the exception of pg_notify, the wrap
point can fall in the middle of a page. Account for this in the
PagePrecedes callback specification and in SimpleLruTruncate()'s use of
said callback. Update each callback implementation to fit the new
specification. This changes SerialPagePrecedesLogically() from the
style of asyncQueuePagePrecedes() to the style of CLOGPagePrecedes().
(Whereas pg_clog and pg_serial share a key space, pg_serial is nothing
like pg_notify.) The bug fixed here has the same symptoms and user
followup steps as 592a589a04. Back-patch
to 9.5 (all supported versions).
Reviewed by Andrey Borodin and (in earlier versions) by Tom Lane.
Discussion: https://postgr.es/m/20190202083822.GC32531@gust.leadboat.com
Teach nbtree and heapam to cooperate in order to eagerly remove
duplicate tuples representing dead MVCC versions. This is "bottom-up
deletion". Each bottom-up deletion pass is triggered lazily in response
to a flood of versions on an nbtree leaf page. This usually involves a
"logically unchanged index" hint (these are produced by the executor
mechanism added by commit 9dc718bd).
The immediate goal of bottom-up index deletion is to avoid "unnecessary"
page splits caused entirely by version duplicates. It naturally has an
even more useful effect, though: it acts as a backstop against
accumulating an excessive number of index tuple versions for any given
_logical row_. Bottom-up index deletion complements what we might now
call "top-down index deletion": index vacuuming performed by VACUUM.
Bottom-up index deletion responds to the immediate local needs of
queries, while leaving it up to autovacuum to perform infrequent clean
sweeps of the index. The overall effect is to avoid certain
pathological performance issues related to "version churn" from UPDATEs.
The previous tableam interface used by index AMs to perform tuple
deletion (the table_compute_xid_horizon_for_tuples() function) has been
replaced with a new interface that supports certain new requirements.
Many (perhaps all) of the capabilities added to nbtree by this commit
could also be extended to other index AMs. That is left as work for a
later commit.
Extend deletion of LP_DEAD-marked index tuples in nbtree by adding logic
to consider extra index tuples (that are not LP_DEAD-marked) for
deletion in passing. This increases the number of index tuples deleted
significantly in many cases. The LP_DEAD deletion process (which is now
called "simple deletion" to clearly distinguish it from bottom-up
deletion) won't usually need to visit any extra table blocks to check
these extra tuples. We have to visit the same table blocks anyway to
generate a latestRemovedXid value (at least in the common case where the
index deletion operation's WAL record needs such a value).
Testing has shown that the "extra tuples" simple deletion enhancement
increases the number of index tuples deleted with almost any workload
that has LP_DEAD bits set in leaf pages. That is, it almost never fails
to delete at least a few extra index tuples. It helps most of all in
cases that happen to naturally have a lot of delete-safe tuples. It's
not uncommon for an individual deletion operation to end up deleting an
order of magnitude more index tuples compared to the old naive approach
(e.g., custom instrumentation of the patch shows that this happens
fairly often when the regression tests are run).
Add a further enhancement that augments simple deletion and bottom-up
deletion in indexes that make use of deduplication: Teach nbtree's
_bt_delitems_delete() function to support granular TID deletion in
posting list tuples. It is now possible to delete individual TIDs from
posting list tuples provided the TIDs have a tableam block number of a
table block that gets visited as part of the deletion process (visiting
the table block can be triggered directly or indirectly). Setting the
LP_DEAD bit of a posting list tuple is still an all-or-nothing thing,
but that matters much less now that deletion only needs to start out
with the right _general_ idea about which index tuples are deletable.
Bump XLOG_PAGE_MAGIC because xl_btree_delete changed.
No bump in BTREE_VERSION, since there are no changes to the on-disk
representation of nbtree indexes. Indexes built on PostgreSQL 12 or
PostgreSQL 13 will automatically benefit from bottom-up index deletion
(i.e. no reindexing required) following a pg_upgrade. The enhancement
to simple deletion is available with all B-Tree indexes following a
pg_upgrade, no matter what PostgreSQL version the user upgrades from.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-By: Victor Yegorov <vyegorov@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wzm+maE3apHB8NOtmM=p-DO65j2V5GzAWCOEEuy3JZgb2g@mail.gmail.com
Add an executor aminsert() hint mechanism that informs index AMs that
the incoming index tuple (the tuple that accompanies the hint) is not
being inserted by execution of an SQL statement that logically modifies
any of the index's key columns.
The hint is received by indexes when an UPDATE takes place that does not
apply an optimization like heapam's HOT (though only for indexes where
all key columns are logically unchanged). Any index tuple that receives
the hint on insert is expected to be a duplicate of at least one
existing older version that is needed for the same logical row. Related
versions will typically be stored on the same index page, at least
within index AMs that apply the hint.
Recognizing the difference between MVCC version churn duplicates and
true logical row duplicates at the index AM level can help with cleanup
of garbage index tuples. Cleanup can intelligently target tuples that
are likely to be garbage, without wasting too many cycles on less
promising tuples/pages (index pages with little or no version churn).
This is infrastructure for an upcoming commit that will teach nbtree to
perform bottom-up index deletion. No index AM actually applies the hint
just yet.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Victor Yegorov <vyegorov@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wz=CEKFa74EScx_hFVshCOn6AA5T-ajFASTdzipdkLTNQQ@mail.gmail.com
Instead of making many block-sized write() calls to fill a new WAL file
with zeroes, make a smaller number of pwritev() calls (or various
emulations). The actual number depends on the OS's IOV_MAX, which
PG_IOV_MAX currently caps at 32. That means we'll write 256kB per call
on typical systems. We may want to tune the number later with more
experience.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKGJA%2Bu-220VONeoREBXJ9P3S94Y7J%2BkqCnTYmahvZJwM%3Dg%40mail.gmail.com
Bring heap and hash rmgr desc output in line with nbtree and GiST desc
output by using the name latestRemovedXid for all fields that output the
contents of the latestRemovedXid field from the WAL record's C struct
(stop using local variants).
This seems like a clear improvement because latestRemovedXid is a symbol
name that already appears across many different source files, and so is
probably much more recognizable.
Discussion: https://postgr.es/m/CAH2-Wzkt_Rs4VqPSCk87nyjPAAEmWL8STU9zgET_83EF5YfrLw@mail.gmail.com
If the substring start index and length overflow when added together,
substring() misbehaved, either throwing a bogus "negative substring
length" error on a case that should succeed, or failing to complain that
a negative length is negative (and instead returning the whole string,
in most cases). Unsurprisingly, the text, bytea, and bit variants of
the function all had this issue. Rearrange the logic to ensure that
negative lengths are always rejected, and add an overflow check to
handle the other case.
Also install similar guards into detoast_attr_slice() (nee
heap_tuple_untoast_attr_slice()), since it's far from clear that
no other code paths leading to that function could pass it values
that would overflow.
Patch by myself and Pavel Stehule, per bug #16804 from Rafi Shamim.
Back-patch to v11. While these bugs are old, the common/int.h
infrastructure for overflow-detecting arithmetic didn't exist before
commit 4d6ad3125, and it doesn't seem like these misbehaviors are bad
enough to justify developing a standalone fix for the older branches.
Discussion: https://postgr.es/m/16804-f4eeeb6c11ba71d4@postgresql.org
On further reflection it seems better to call PageGetMaxOffsetNumber()
after acquiring a buffer lock on the page. This shouldn't really
matter, but doing it this way is cleaner.
Follow-up to commit 42288174.
Backpatch: 12-, just like commit 42288174
David Rowley
Peter Geoghegan
Michael Paquier
Alvaro Herrera
Peter Eisentraut
Fujii Masao
Andres Freund
Thomas Munro
Bruce Momjian
Amit Kapila
Heikki Linnakangas
Robert Haas
Tomas Vondra
Noah Misch
Tom Lane