SPI_execute_with_receiver and SPI_cursor_parse_open_with_paramlist are
new in v14 (cf. commit 2f48ede08). Before they can get out the door,
let's change their APIs to follow the practice recently established by
SPI_prepare_extended etc: shove all optional arguments into a struct
that callers are supposed to pre-zero. The hope is to allow future
addition of more options without either API breakage or a continuing
proliferation of new SPI entry points. With that in mind, choose
slightly more generic names for them: SPI_execute_extended and
SPI_cursor_parse_open respectively.
Discussion: https://postgr.es/m/CAFj8pRCLPdDAETvR7Po7gC5y_ibkn_-bOzbeJb39WHms01194Q@mail.gmail.com
This patch essentially is cleaning up technical debt left behind
by the original implementation of plpgsql procedures, particularly
commit d92bc83c4. That patch (or more precisely, follow-on patches
fixing its worst bugs) forced us to re-plan CALL and DO statements
each time through, if we're in a non-atomic context. That wasn't
for any fundamental reason, but just because use of a saved plan
requires having a ResourceOwner to hold a reference count for the
plan, and we had no suitable resowner at hand, nor would the
available APIs support using one if we did. While it's not that
expensive to create a "plan" for CALL/DO, the cycles do add up
in repeated executions.
This patch therefore makes the following API changes:
* GetCachedPlan/ReleaseCachedPlan are modified to let the caller
specify which resowner to use to pin the plan, rather than forcing
use of CurrentResourceOwner.
* spi.c gains a "SPI_execute_plan_extended" entry point that lets
callers say which resowner to use to pin the plan. This borrows the
idea of an options struct from the recently added SPI_prepare_extended,
hopefully allowing future options to be added without more API breaks.
This supersedes SPI_execute_plan_with_paramlist (which I've marked
deprecated) as well as SPI_execute_plan_with_receiver (which is new
in v14, so I just took it out altogether).
* I also took the opportunity to remove the crude hack of letting
plpgsql reach into SPI private data structures to mark SPI plans as
"no_snapshot". It's better to treat that as an option of
SPI_prepare_extended.
Now, when running a non-atomic procedure or DO block that contains
any CALL or DO commands, plpgsql creates a ResourceOwner that
will be used to pin the plans of the CALL/DO commands. (In an
atomic context, we just use CurrentResourceOwner, as before.)
Having done this, we can just save CALL/DO plans normally,
whether or not they are used across transaction boundaries.
This seems to be good for something like 2X speedup of a CALL
of a trivial procedure with a few simple argument expressions.
By restricting the creation of an extra ResourceOwner like this,
there's essentially zero penalty in cases that can't benefit.
Pavel Stehule, with some further hacking by me
Discussion: https://postgr.es/m/CAFj8pRCLPdDAETvR7Po7gC5y_ibkn_-bOzbeJb39WHms01194Q@mail.gmail.com
Up until now, we've held this lock when performing a checkpoint or
restartpoint, but commit 076a055acf back
in 2004 and commit 7e48b77b1c from 2009,
taken together, have removed all need for this. In the present code,
there's only ever one process entitled to attempt a checkpoint: either
the checkpointer, during normal operation, or the postmaster, during
single-user operation. So, we don't need the lock.
One possible concern in making this change is that it means that
a substantial amount of code where HOLD_INTERRUPTS() was previously
in effect due to the preceding LWLockAcquire() will now be
running without that. This could mean that ProcessInterrupts()
gets called in places from which it didn't before. However, this
seems unlikely to do very much, because the checkpointer doesn't
have any signal mapped to die(), so it's not clear how,
for example, ProcDiePending = true could happen in the first
place. Similarly with ClientConnectionLost and recovery conflicts.
Also, if there are any such problems, we might want to fix them
rather than reverting this, since running lots of code with
interrupt handling suspended is generally bad.
Patch by me, per an inquiry by Amul Sul. Review by Tom Lane
and Michael Paquier.
Discussion: http://postgr.es/m/CAAJ_b97XnBBfYeSREDJorFsyoD1sHgqnNuCi=02mNQBUMnA=FA@mail.gmail.com
Both heapgettup() and heapgettup_pagemode() incorrectly set the first page
to scan in a backward scan in which the number of pages to scan was
specified by heap_setscanlimits(). The code incorrectly started the scan
at the end of the relation when startBlk was 0, or otherwise at
startBlk - 1, neither of which is correct when only scanning a subset of
pages.
The fix here checks if heap_setscanlimits() has changed the number of
pages to scan and if so we set the first page to scan as the final page in
the specified range during backward scans.
Proper adjustment of this code was forgotten when heap_setscanlimits() was
added in 7516f5259 back in 9.5. However, practice, nowhere in core code
performs backward scans after having used heap_setscanlimits(), yet, it is
possible an extension uses the heap functions in this way, hence
backpatch.
An upcoming patch does use heap_setscanlimits() with backward scans, so
this must be fixed before that can go in.
Author: David Rowley
Discussion: https://postgr.es/m/CAApHDvpGc9h0_oVD2CtgBcxCS1N-qDYZSeBRnUh+0CWJA9cMaA@mail.gmail.com
Backpatch-through: 9.5, all supported versions
Commit 69bd60672 fixed the initialization of streamed transactions for
RelationSyncEntry. It forgot to initialize the publication actions while
invalidating the RelationSyncEntry due to which even though the relation
is dropped from a particular publication we still publish its changes. Fix
it by initializing pubactions when entry got invalidated.
Author: Japin Li and Bharath Rupireddy
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CALj2ACV+0UFpcZs5czYgBpujM9p0Hg1qdOZai_43OU7bqHU_xw@mail.gmail.com
This adds code omitted from commit 7db0cd2145 by accident, which had
two consequences. Firstly, only rows inserted by heap_multi_insert were
frozen as expected when running COPY FREEZE, while heap_insert left
rows unfrozen. That however includes rows in TOAST tables, so a lot of
data might have been left unfrozen. Secondly, page might have been left
partially empty after relcache invalidation.
This addresses both of those issues.
Discussion: https://postgr.es/m/CABOikdN-ptGv0mZntrK2Q8OtfUuAjqaYMGmkdU1dCKFtUxVLrg@mail.gmail.com
I'd omitted this from the grammar in commit c9d529848, figuring that
it wasn't worth supporting. However we already have one complaint,
so it seems that judgment was wrong. It doesn't require a huge
amount of code, so add it back. (I'm still drawing the line at
UNION/INTERSECT/EXCEPT though: those'd require an unreasonable
amount of grammar refactoring, and the single-result-row restriction
makes them near useless anyway.)
Also rethink the documentation: this behavior is a property of
all pl/pgsql expressions, not just assignments.
Discussion: https://postgr.es/m/20210122134106.e94c5cd7@mail.verfriemelt.org
The callback for retrieving state change information during connection
setup was only installed when the connection was mostly set up, and
thus didn't provide much information and missed all the details related
to the handshake.
This also extends the callback with SSL_state_string_long() to print
more information about the state change within the SSL object handled.
While there, fix some comments which were incorrectly referring to the
callback and its previous location in fe-secure.c.
Author: Daniel Gustafsson
Discussion: https://postgr.es/m/232CF476-94E1-42F1-9408-719E2AEC5491@yesql.se
Previously, pull_varnos() took the relids of a PlaceHolderVar as being
equal to the relids in its contents, but that fails to account for the
possibility that we have to postpone evaluation of the PHV due to outer
joins. This could result in a malformed plan. The known cases end up
triggering the "failed to assign all NestLoopParams to plan nodes"
sanity check in createplan.c, but other symptoms may be possible.
The right value to use is the join level we actually intend to evaluate
the PHV at. We can get that from the ph_eval_at field of the associated
PlaceHolderInfo. However, there are some places that call pull_varnos()
before the PlaceHolderInfos have been created; in that case, fall back
to the conservative assumption that the PHV will be evaluated at its
syntactic level. (In principle this might result in missing some legal
optimization, but I'm not aware of any cases where it's an issue in
practice.) Things are also a bit ticklish for calls occurring during
deconstruct_jointree(), but AFAICS the ph_eval_at fields should have
reached their final values by the time we need them.
The main problem in making this work is that pull_varnos() has no
way to get at the PlaceHolderInfos. We can fix that easily, if a
bit tediously, in HEAD by passing it the planner "root" pointer.
In the back branches that'd cause an unacceptable API/ABI break for
extensions, so leave the existing entry points alone and add new ones
with the additional parameter. (If an old entry point is called and
encounters a PHV, it'll fall back to using the syntactic level,
again possibly missing some valid optimization.)
Back-patch to v12. The computation is surely also wrong before that,
but it appears that we cannot reach a bad plan thanks to join order
restrictions imposed on the subquery that the PlaceHolderVar came from.
The error only became reachable when commit 4be058fe9 allowed trivial
subqueries to be collapsed out completely, eliminating their join order
restrictions.
Per report from Stephan Springl.
Discussion: https://postgr.es/m/171041.1610849523@sss.pgh.pa.us
ExecInitModifyTable has to initialize batching for all result relations,
not just the first one. Furthermore, when junk filters were necessary,
the pointer pointed past the mtstate->resultRelInfo array.
Per reports from multiple non-x86 animals (florican, locust, ...).
Discussion: https://postgr.es/m/20200628151002.7x5laxwpgvkyiu3q@development
Extends the FDW API to allow batching inserts into foreign tables. That
is usually much more efficient than inserting individual rows, due to
high latency for each round-trip to the foreign server.
It was possible to implement something similar in the regular FDW API,
but it was inconvenient and there were issues with reporting the number
of actually inserted rows etc. This extends the FDW API with two new
functions:
* GetForeignModifyBatchSize - allows the FDW picking optimal batch size
* ExecForeignBatchInsert - inserts a batch of rows at once
Currently, only INSERT queries support batching. Support for DELETE and
UPDATE may be added in the future.
This also implements batching for postgres_fdw. The batch size may be
specified using "batch_size" option both at the server and table level.
The initial patch version was written by me, but it was rewritten and
improved in many ways by Takayuki Tsunakawa.
Author: Takayuki Tsunakawa
Reviewed-by: Tomas Vondra, Amit Langote
Discussion: https://postgr.es/m/20200628151002.7x5laxwpgvkyiu3q@development
In commit 9eb5607e69, I got the condition on checking for split or
deleted page wrong: I used && instead of ||. The comment correctly said
"concurrent split _or_ deletion".
As a result, GiST insertion could miss a concurrent split, and insert to
wrong page. Duncan Sands demonstrated this with a test script that did a
lot of concurrent inserts.
Backpatch to v12, where this was introduced. REINDEX is required to fix
indexes that were affected by this bug.
Backpatch-through: 12
Reported-by: Duncan Sands
Discussion: https://www.postgresql.org/message-id/a9690483-6c6c-3c82-c8ba-dc1a40848f11%40deepbluecap.com
Specifying duplicated objects in this command would lead to unique
constraint violations in pg_default_acl or "tuple already updated by
self" errors. Similarly to GRANT/REVOKE, increment the command ID after
each subcommand processing to allow this case to work transparently.
A regression test is added by tweaking one of the existing queries of
privileges.sql to stress this case.
Reported-by: Andrus
Author: Michael Paquier
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/ae2a7dc1-9d71-8cba-3bb9-e4cb7eb1f44e@hot.ee
Backpatch-through: 9.5
Somebody extended search_plan_tree() to treat MergeAppend exactly
like Append, which is 100% wrong, because unlike Append we can't
assume that only one input node is actively returning tuples.
Hence a cursor using a MergeAppend across a UNION ALL or inheritance
tree could falsely match a WHERE CURRENT OF query at a row that
isn't actually the cursor's current output row, but coincidentally
has the same TID (in a different table) as the current output row.
Delete the faulty code; this means that such a case will now return
an error like 'cursor "foo" is not a simply updatable scan of table
"bar"', instead of silently misbehaving. Users should not find that
surprising though, as the same cursor query could have failed that way
already depending on the chosen plan. (It would fail like that if the
sort were done with an explicit Sort node instead of MergeAppend.)
Expand the clearly-inadequate commentary to be more explicit about
what this code is doing, in hopes of forestalling future mistakes.
It's been like this for awhile, so back-patch to all supported
branches.
Discussion: https://postgr.es/m/482865.1611075182@sss.pgh.pa.us
execCurrent.c's search_plan_tree() assumed that ForeignScanStates
and CustomScanStates necessarily have a valid ss_currentRelation.
This is demonstrably untrue for postgres_fdw's remote join and
remote aggregation plans, and non-leaf custom scans might not have
an identifiable scan relation either. Avoid crashing by ignoring
such nodes when the field is null.
This solution will lead to errors like 'cursor "foo" is not a
simply updatable scan of table "bar"' in cases where maybe we
could have allowed WHERE CURRENT OF to work. That's not an issue
for postgres_fdw's usages, since joins or aggregations would render
WHERE CURRENT OF invalid anyway. But an otherwise-transparent
upper level custom scan node might find this annoying. When and if
someone cares to expend work on such a scenario, we could invent a
custom-scan-provider callback to determine what's safe.
Report and patch by David Geier, commentary by me. It's been like
this for awhile, so back-patch to all supported branches.
Discussion: https://postgr.es/m/0253344d-9bdd-11c4-7f0d-d88c02cd7991@swarm64.com
Previously, the per-barrier-type functions tasked with absorbing
them were expected to always succeed and never throw an error.
However, that's a bit inconvenient. Further study has revealed that
there are realistic cases where it might not be possible to absorb
a ProcSignalBarrier without terminating the transaction, or even
the whole backend. Similarly, for some barrier types, there might
be other reasons where it's not reasonably possible to absorb the
barrier at certain points in the code, so provide a way for a
per-barrier-type function to reject absorbing the barrier.
Unfortunately, there's still no committed code making use of this
infrastructure; hopefully, we'll get there. :-(
Patch by me, reviewed by Andres Freund and Amul Sul.
Discussion: http://postgr.es/m/20200908182005.xya7wetdh3pndzim@alap3.anarazel.de
Discussion: http://postgr.es/m/CA+Tgmob56Pk1-5aTJdVPCWFHon7me4M96ENpGe9n_R4JUjjhZA@mail.gmail.com
When certain parameters are changed on a physical replication primary,
this is communicated to standbys using the XLOG_PARAMETER_CHANGE WAL
record. The standby then checks whether its own settings are at least
as big as the ones on the primary. If not, the standby shuts down
with a fatal error.
This patch changes this behavior for hot standbys to pause recovery at
that point instead. That allows read traffic on the standby to
continue while database administrators figure out next steps. When
recovery is unpaused, the server shuts down (as before). The idea is
to fix the parameters while recovery is paused and then restart when
there is a maintenance window.
Reviewed-by: Sergei Kornilov <sk@zsrv.org>
Discussion: https://www.postgresql.org/message-id/flat/4ad69a4c-cc9b-0dfe-0352-8b1b0cd36c7b@2ndquadrant.com
This continues the work done in b5913f6. All the options of those
commands are changed to use hex values rather than enums to reduce the
risk of compatibility bugs when introducing new options. Each option
set is moved into a new structure that can be extended with more
non-boolean options (this was already the case of VACUUM). The code of
REINDEX is restructured so as manual REINDEX commands go through a
single routine from utility.c, like VACUUM, to ease the allocation
handling of option parameters when a command needs to go through
multiple transactions.
This can be used as a base infrastructure for future patches related to
those commands, including reindex filtering and tablespace support.
Per discussion with people mentioned below, as well as Alvaro Herrera
and Peter Eisentraut.
Author: Michael Paquier, Justin Pryzby
Reviewed-by: Alexey Kondratov, Justin Pryzby
Discussion: https://postgr.es/m/X8riynBLwxAD9uKk@paquier.xyz
Make sure COPY FREEZE marks the pages as PD_ALL_VISIBLE and updates the
visibility map. Until now we only marked individual tuples as frozen,
but page-level flags were not updated, so the first VACUUM after the
COPY FREEZE had to rewrite the whole table.
This is a fairly old patch, and multiple people worked on it. The first
version was written by Jeff Janes, and then reworked by Pavan Deolasee
and Anastasia Lubennikova.
Author: Anastasia Lubennikova, Pavan Deolasee, Jeff Janes
Reviewed-by: Kuntal Ghosh, Jeff Janes, Tomas Vondra, Masahiko Sawada,
Andres Freund, Ibrar Ahmed, Robert Haas, Tatsuro Ishii,
Darafei Praliaskouski
Discussion: https://postgr.es/m/CABOikdN-ptGv0mZntrK2Q8OtfUuAjqaYMGmkdU1dCKFtUxVLrg@mail.gmail.com
Discussion: https://postgr.es/m/CAMkU%3D1w3osJJ2FneELhhNRLxfZitDgp9FPHee08NT2FQFmz_pQ%40mail.gmail.com
This add counters for number of sessions, the different kind of session
termination types, and timers for how much time is spent in active vs
idle in a database to pg_stat_database.
Internally this also renames the parameter "force" to disconnect. This
was the only use-case for the parameter before, so repurposing it to
this mroe narrow usecase makes things cleaner than inventing something
new.
Author: Laurenz Albe
Reviewed-By: Magnus Hagander, Soumyadeep Chakraborty, Masahiro Ikeda
Discussion: https://postgr.es/m/b07e1f9953701b90c66ed368656f2aef40cac4fb.camel@cybertec.at
Every core SLRU wraps around. With the exception of pg_notify, the wrap
point can fall in the middle of a page. Account for this in the
PagePrecedes callback specification and in SimpleLruTruncate()'s use of
said callback. Update each callback implementation to fit the new
specification. This changes SerialPagePrecedesLogically() from the
style of asyncQueuePagePrecedes() to the style of CLOGPagePrecedes().
(Whereas pg_clog and pg_serial share a key space, pg_serial is nothing
like pg_notify.) The bug fixed here has the same symptoms and user
followup steps as 592a589a04. Back-patch
to 9.5 (all supported versions).
Reviewed by Andrey Borodin and (in earlier versions) by Tom Lane.
Discussion: https://postgr.es/m/20190202083822.GC32531@gust.leadboat.com
The result of TextDatumGetCString is already palloc'ed so we don't need to
allocate memory for it again. We decide not to backpatch it as there
doesn't seem to be any case where it can create a meaningful leak.
Author: Zhijie Hou
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/229fed2eb8c54c71a96ccb99e516eb12@G08CNEXMBPEKD05.g08.fujitsu.local
Add a check that CREATE STATISTICS does not add extended statistics on
system catalogs, similarly to indexes etc. It can be overriden using
the allow_system_table_mods GUC.
This bug exists since 7b504eb282, adding the extended statistics, so
backpatch all the way back to PostgreSQL 10.
Author: Tomas Vondra
Reported-by: Dean Rasheed
Backpatch-through: 10
Discussion: https://postgr.es/m/CAEZATCXAPrrOKwEsyZKQ4uzzJQWBCt6QAvOcgqRGdWwT1zb%2BrQ%40mail.gmail.com
This is like commit c98763bf51, but for REINDEX CONCURRENTLY. To wit:
this flags indicates that the current process is safe to ignore for the
purposes of waiting for other snapshots, when doing CREATE INDEX
CONCURRENTLY and REINDEX CONCURRENTLY. This helps two processes doing
either of those things not deadlock, and also avoids spurious waits.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Dmitry Dolgov <9erthalion6@gmail.com>
Reviewed-by: Hamid Akhtar <hamid.akhtar@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/20201130195439.GA24598@alvherre.pgsql
When a tablespace is used in a partitioned relation (per commits
ca4103025d in pg12 for tables and 33e6c34c32 in pg11 for indexes),
it is possible to drop the tablespace, potentially causing various
problems. One such was reported in bug #16577, where a rewriting ALTER
TABLE causes a server crash.
Protect against this by using pg_shdepend to keep track of tablespaces
when used for relations that don't keep physical files; we now abort a
tablespace if we see that the tablespace is referenced from any
partitioned relations.
Backpatch this to 11, where this problem has been latent all along. We
don't try to create pg_shdepend entries for existing partitioned
indexes/tables, but any ones that are modified going forward will be
protected.
Note slight behavior change: when trying to drop a tablespace that
contains both regular tables as well as partitioned ones, you'd
previously get ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE and now you'll
get ERRCODE_DEPENDENT_OBJECTS_STILL_EXIST. Arguably, the latter is more
correct.
It is possible to add protecting pg_shdepend entries for existing
tables/indexes, by doing
ALTER TABLE ONLY some_partitioned_table SET TABLESPACE pg_default;
ALTER TABLE ONLY some_partitioned_table SET TABLESPACE original_tablespace;
for each partitioned table/index that is not in the database default
tablespace. Because these partitioned objects do not have storage, no
file needs to be actually moved, so it shouldn't take more time than
what's required to acquire locks.
This query can be used to search for such relations:
SELECT ... FROM pg_class WHERE relkind IN ('p', 'I') AND reltablespace <> 0
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/16577-881633a9f9894fd5@postgresql.org
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Commit 709d003fbd refactored WAL-reading code, but accidentally caused
WalSndSegmentOpen() to fail to follow a timeline switch while reading from
a historic timeline. This issue caused a standby to fail to follow a primary
on a newer timeline when WAL archiving is enabled.
If there is a timeline switch within the segment, WalSndSegmentOpen() should
read from the WAL segment belonging to the new timeline. But previously
since it failed to follow a timeline switch, it tried to read the WAL segment
with old timeline. When WAL archiving is enabled, that WAL segment with
old timeline doesn't exist because it's renamed to .partial. This leads
a primary to have tried to read non-existent WAL segment, and which caused
replication to faill with the error "ERROR: requested WAL segment ... has
already been removed".
This commit fixes WalSndSegmentOpen() so that it's able to follow a timeline
switch, to ensure that a standby is able to follow a primary on a newer
timeline even when WAL archiving is enabled.
This commit also adds the regression test to check whether a standby is
able to follow a primary on a newer timeline when WAL archiving is enabled.
Back-patch to v13 where the bug was introduced.
Reported-by: Kyotaro Horiguchi
Author: Kyotaro Horiguchi, tweaked by Fujii Masao
Reviewed-by: Alvaro Herrera, Fujii Masao
Discussion: https://postgr.es/m/20201209.174314.282492377848029776.horikyota.ntt@gmail.com
This commit addresses some issues with c3826f83 that moved the hex
decoding routine to src/common/:
- The decoding function lacked overflow checks, so when used for
security-related features it was an open door to out-of-bound writes if
not carefully used that could remain undetected. Like the base64
routines already in src/common/ used by SCRAM, this routine is reworked
to check for overflows by having the size of the destination buffer
passed as argument, with overflows checked before doing any writes.
- The encoding routine was missing. This is moved to src/common/ and
it gains the same overflow checks as the decoding part.
On failure, the hex routines of src/common/ issue an error as per the
discussion done to make them usable by frontend tools, but not by shared
libraries. Note that this is why ECPG is left out of this commit, and
it still includes a duplicated logic doing hex encoding and decoding.
While on it, this commit uses better variable names for the source and
destination buffers in the existing escape and base64 routines in
encode.c and it makes them more robust to overflow detection. The
previous core code issued a FATAL after doing out-of-bound writes if
going through the SQL functions, which would be enough to detect
problems when working on changes that impacted this area of the
code. Instead, an error is issued before doing an out-of-bound write.
The hex routines were being directly called for bytea conversions and
backup manifests without such sanity checks. The current calls happen
to not have any problems, but careless uses of such APIs could easily
lead to CVE-class bugs.
Author: Bruce Momjian, Michael Paquier
Reviewed-by: Sehrope Sarkuni
Discussion: https://postgr.es/m/20201231003557.GB22199@momjian.us
macOS's ranlib issued a warning about an empty pread.o file with the
previous arrangement, on systems new enough to require no replacement
functions. Let's go back to using configure's AC_REPLACE_FUNCS system
to build and include each .o in the library only if it's needed, which
requires moving the *v() functions to their own files.
Also move the _with_retry() wrapper to a more permanent home.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/1283127.1610554395%40sss.pgh.pa.us
Teach nbtree and heapam to cooperate in order to eagerly remove
duplicate tuples representing dead MVCC versions. This is "bottom-up
deletion". Each bottom-up deletion pass is triggered lazily in response
to a flood of versions on an nbtree leaf page. This usually involves a
"logically unchanged index" hint (these are produced by the executor
mechanism added by commit 9dc718bd).
The immediate goal of bottom-up index deletion is to avoid "unnecessary"
page splits caused entirely by version duplicates. It naturally has an
even more useful effect, though: it acts as a backstop against
accumulating an excessive number of index tuple versions for any given
_logical row_. Bottom-up index deletion complements what we might now
call "top-down index deletion": index vacuuming performed by VACUUM.
Bottom-up index deletion responds to the immediate local needs of
queries, while leaving it up to autovacuum to perform infrequent clean
sweeps of the index. The overall effect is to avoid certain
pathological performance issues related to "version churn" from UPDATEs.
The previous tableam interface used by index AMs to perform tuple
deletion (the table_compute_xid_horizon_for_tuples() function) has been
replaced with a new interface that supports certain new requirements.
Many (perhaps all) of the capabilities added to nbtree by this commit
could also be extended to other index AMs. That is left as work for a
later commit.
Extend deletion of LP_DEAD-marked index tuples in nbtree by adding logic
to consider extra index tuples (that are not LP_DEAD-marked) for
deletion in passing. This increases the number of index tuples deleted
significantly in many cases. The LP_DEAD deletion process (which is now
called "simple deletion" to clearly distinguish it from bottom-up
deletion) won't usually need to visit any extra table blocks to check
these extra tuples. We have to visit the same table blocks anyway to
generate a latestRemovedXid value (at least in the common case where the
index deletion operation's WAL record needs such a value).
Testing has shown that the "extra tuples" simple deletion enhancement
increases the number of index tuples deleted with almost any workload
that has LP_DEAD bits set in leaf pages. That is, it almost never fails
to delete at least a few extra index tuples. It helps most of all in
cases that happen to naturally have a lot of delete-safe tuples. It's
not uncommon for an individual deletion operation to end up deleting an
order of magnitude more index tuples compared to the old naive approach
(e.g., custom instrumentation of the patch shows that this happens
fairly often when the regression tests are run).
Add a further enhancement that augments simple deletion and bottom-up
deletion in indexes that make use of deduplication: Teach nbtree's
_bt_delitems_delete() function to support granular TID deletion in
posting list tuples. It is now possible to delete individual TIDs from
posting list tuples provided the TIDs have a tableam block number of a
table block that gets visited as part of the deletion process (visiting
the table block can be triggered directly or indirectly). Setting the
LP_DEAD bit of a posting list tuple is still an all-or-nothing thing,
but that matters much less now that deletion only needs to start out
with the right _general_ idea about which index tuples are deletable.
Bump XLOG_PAGE_MAGIC because xl_btree_delete changed.
No bump in BTREE_VERSION, since there are no changes to the on-disk
representation of nbtree indexes. Indexes built on PostgreSQL 12 or
PostgreSQL 13 will automatically benefit from bottom-up index deletion
(i.e. no reindexing required) following a pg_upgrade. The enhancement
to simple deletion is available with all B-Tree indexes following a
pg_upgrade, no matter what PostgreSQL version the user upgrades from.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-By: Victor Yegorov <vyegorov@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wzm+maE3apHB8NOtmM=p-DO65j2V5GzAWCOEEuy3JZgb2g@mail.gmail.com
Add an executor aminsert() hint mechanism that informs index AMs that
the incoming index tuple (the tuple that accompanies the hint) is not
being inserted by execution of an SQL statement that logically modifies
any of the index's key columns.
The hint is received by indexes when an UPDATE takes place that does not
apply an optimization like heapam's HOT (though only for indexes where
all key columns are logically unchanged). Any index tuple that receives
the hint on insert is expected to be a duplicate of at least one
existing older version that is needed for the same logical row. Related
versions will typically be stored on the same index page, at least
within index AMs that apply the hint.
Recognizing the difference between MVCC version churn duplicates and
true logical row duplicates at the index AM level can help with cleanup
of garbage index tuples. Cleanup can intelligently target tuples that
are likely to be garbage, without wasting too many cycles on less
promising tuples/pages (index pages with little or no version churn).
This is infrastructure for an upcoming commit that will teach nbtree to
perform bottom-up index deletion. No index AM actually applies the hint
just yet.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Victor Yegorov <vyegorov@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wz=CEKFa74EScx_hFVshCOn6AA5T-ajFASTdzipdkLTNQQ@mail.gmail.com
This is a follow-up of the work done in commit 0650ff2303. This commit
extends log_recovery_conflict_waits so that a log message is produced
also when recovery conflict has already been resolved after deadlock_timeout
passes, i.e., when the startup process finishes waiting for recovery
conflict after deadlock_timeout. This is useful in investigating how long
recovery conflicts prevented the recovery from applying WAL.
Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Bertrand Drouvot
Discussion: https://postgr.es/m/9a60178c-a853-1440-2cdc-c3af916cff59@amazon.com
Similar to commit d6ad34f341, this patch optimizes
DropRelFileNodesAllBuffers() by avoiding the complete buffer pool scan and
instead find the buffers to be invalidated by doing lookups in the
BufMapping table.
This optimization helps operations where the relation files need to be
removed like Truncate, Drop, Abort of Create Table, etc.
Author: Kirk Jamison
Reviewed-by: Kyotaro Horiguchi, Takayuki Tsunakawa, and Amit Kapila
Tested-By: Haiying Tang
Discussion: https://postgr.es/m/OSBPR01MB3207DCA7EC725FDD661B3EDAEF660@OSBPR01MB3207.jpnprd01.prod.outlook.com
This struct is used by ReindexRelationConcurrently to keep track of the
relations to process. This saves having to obtain some data repeatedly,
and has future uses as well.
Reviewed-by: Dmitry Dolgov <9erthalion6@gmail.com>
Reviewed-by: Hamid Akhtar <hamid.akhtar@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/20201130195439.GA24598@alvherre.pgsql
The recovery path of DropRelFileNodeBuffers() is optimized so that
scanning of the whole buffer pool can be avoided when the number of
blocks to be truncated in a relation is below a certain threshold. For
such cases, we find the buffers by doing lookups in BufMapping table.
This improves the performance by more than 100 times in many cases
when several small tables (tested with 1000 relations) are truncated
and where the server is configured with a large value of shared
buffers (greater than equal to 100GB).
This optimization helps cases (a) when vacuum or autovacuum truncated off
any of the empty pages at the end of a relation, or (b) when the relation is
truncated in the same transaction in which it was created.
This commit introduces a new API smgrnblocks_cached which returns a cached
value for the number of blocks in a relation fork. This helps us to determine
the exact size of relation which is required to apply this optimization. The
exact size is required to ensure that we don't leave any buffer for the
relation being dropped as otherwise the background writer or checkpointer
can lead to a PANIC error while flushing buffers corresponding to files that
don't exist.
Author: Kirk Jamison based on ideas by Amit Kapila
Reviewed-by: Kyotaro Horiguchi, Takayuki Tsunakawa, and Amit Kapila
Tested-By: Haiying Tang
Discussion: https://postgr.es/m/OSBPR01MB3207DCA7EC725FDD661B3EDAEF660@OSBPR01MB3207.jpnprd01.prod.outlook.com
Move it to class 57 (Operator Intervention), which seems like a
better choice given that from the client's standpoint it behaves
a heck of a lot like, e.g., ERRCODE_ADMIN_SHUTDOWN.
In a green field I'd put ERRCODE_IDLE_IN_TRANSACTION_SESSION_TIMEOUT
here as well. But that's been around for a few years, so it's
probably too late to change its SQLSTATE code.
Discussion: https://postgr.es/m/763A0689-F189-459E-946F-F0EC4458980B@hotmail.com
Instead of making many block-sized write() calls to fill a new WAL file
with zeroes, make a smaller number of pwritev() calls (or various
emulations). The actual number depends on the OS's IOV_MAX, which
PG_IOV_MAX currently caps at 32. That means we'll write 256kB per call
on typical systems. We may want to tune the number later with more
experience.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKGJA%2Bu-220VONeoREBXJ9P3S94Y7J%2BkqCnTYmahvZJwM%3Dg%40mail.gmail.com
brenext(), when parsing a '*' quantifier, forgot to return any "value"
for the token; per the equivalent case in next(), it should return
value 1 to indicate that greedy rather than non-greedy behavior is
wanted. The result is that the compiled regexp could behave like 'x*?'
rather than the intended 'x*', if we were unlucky enough to have
a zero in v->nextvalue at this point. That seems to happen with some
reliability if we have '.*' at the beginning of a BRE-mode regexp,
although that depends on the initial contents of a stack-allocated
struct, so it's not guaranteed to fail.
Found by Alexander Lakhin using valgrind testing. This bug seems
to be aboriginal in Spencer's code, so back-patch all the way.
Discussion: https://postgr.es/m/16814-6c5e3edd2bdf0d50@postgresql.org
On reflection, the order of operations in PostgresMain() is wrong.
These timeouts ought to be shut down before, not after, we do the
post-command-read CHECK_FOR_INTERRUPTS, to guarantee that any
timeout error will be detected there rather than at some ill-defined
later point (possibly after having wasted a lot of work).
This is really an error in the original idle_in_transaction_timeout
patch, so back-patch to 9.6 where that was introduced.
This commit adds GUC log_recovery_conflict_waits that controls whether
a log message is produced when the startup process is waiting longer than
deadlock_timeout for recovery conflicts. This is useful in determining
if recovery conflicts prevent the recovery from applying WAL.
Note that currently a log message is produced only when recovery conflict
has not been resolved yet even after deadlock_timeout passes, i.e.,
only when the startup process is still waiting for recovery conflict
even after deadlock_timeout.
Author: Bertrand Drouvot, Masahiko Sawada
Reviewed-by: Alvaro Herrera, Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/9a60178c-a853-1440-2cdc-c3af916cff59@amazon.com
This GUC variable works much like idle_in_transaction_session_timeout,
in that it kills sessions that have waited too long for a new client
query. But it applies when we're not in a transaction, rather than
when we are.
Li Japin, reviewed by David Johnston and Hayato Kuroda, some
fixes by me
Discussion: https://postgr.es/m/763A0689-F189-459E-946F-F0EC4458980B@hotmail.com
A very common usage pattern is that we set a timeout that we don't
expect to reach, cancel it after a little bit, and later repeat.
With the original implementation of timeout.c, this results in one
setitimer() call per timeout set or cancel. We can do a lot better
by being lazy about changing the timeout interrupt request, namely:
(1) never cancel the outstanding interrupt, even when we have no
active timeout events;
(2) if we need to set an interrupt, but there already is one pending
at or before the required time, leave it alone. When the interrupt
happens, the signal handler will reschedule it at whatever time is
then needed.
For example, with a one-second setting for statement_timeout, this
method results in having to interact with the kernel only a little
more than once a second, no matter how many statements we execute
in between. The mainline code might never call setitimer() at all
after the first time, while each time the signal handler fires,
it sees that the then-pending request is most of a second away,
and that's when it sets the next interrupt request for. Each
mainline timeout-set request after that will observe that the time
it wants is past the pending interrupt request time, and do nothing.
This also works pretty well for cases where a few different timeout
lengths are in use, as long as none of them are very short. But
that describes our usage well.
Idea and original patch by Thomas Munro; I fixed a race condition
and improved the comments.
Discussion: https://postgr.es/m/CA+hUKG+o6pbuHBJSGnud=TadsuXySWA7CCcPgCt2QE9F6_4iHQ@mail.gmail.com
Forced cache invalidation (CLOBBER_CACHE_ALWAYS) has been impractical
to use for testing in PostgreSQL because it's so slow and because it's
toggled on/off only at build time. It is helpful when hunting bugs in
any code that uses the sycache/relcache because causes cache
invalidations to be injected whenever it would be possible for an
invalidation to occur, whether or not one was really pending.
Address this by providing run-time control over cache clobber
behaviour using the new debug_invalidate_system_caches_always GUC.
Support is not compiled in at all unless assertions are enabled or
CLOBBER_CACHE_ENABLED is explicitly defined at compile time. It
defaults to 0 if compiled in, so it has negligible effect on assert
build performance by default.
When support is compiled in, test code can now set
debug_invalidate_system_caches_always=1 locally to a backend to test
specific queries, functions, extensions, etc. Or tests can toggle it
globally for a specific test case while retaining normal performance
during test setup and teardown.
For backwards compatibility with existing test harnesses and scripts,
debug_invalidate_system_caches_always defaults to 1 if
CLOBBER_CACHE_ALWAYS is defined, and to 3 if CLOBBER_CACHE_RECURSIVE
is defined.
CLOBBER_CACHE_ENABLED is now visible in pg_config_manual.h, as is the
related RECOVER_RELATION_BUILD_MEMORY setting for the relcache.
Author: Craig Ringer <craig.ringer@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/CAMsr+YF=+ctXBZj3ywmvKNUjWpxmuTuUKuv-rgbHGX5i5pLstQ@mail.gmail.com
The deadlocks that the recovery conflict on lock is involved in can
happen between hot-standby backends and the startup process.
If a backend takes an access exclusive lock on the table and which
finally triggers the deadlock, that deadlock can be detected
as expected. On the other hand, previously, if the startup process
took an access exclusive lock and which finally triggered the deadlock,
that deadlock could not be detected and could remain even after
deadlock_timeout passed. This is a bug.
The cause of this bug was that the code for handling the recovery
conflict on lock didn't take care of deadlock case at all. It assumed
that deadlocks involving the startup process and backends were able
to be detected by the deadlock detector invoked within backends.
But this assumption was incorrect. The startup process also should
have invoked the deadlock detector if necessary.
To fix this bug, this commit makes the startup process invoke
the deadlock detector if deadlock_timeout is reached while handling
the recovery conflict on lock. Specifically, in that case, the startup
process requests all the backends holding the conflicting locks to
check themselves for deadlocks.
Back-patch to v9.6. v9.5 has also this bug, but per discussion we decided
not to back-patch the fix to v9.5. Because v9.5 doesn't have some
infrastructure codes (e.g., 37c54863cf) that this bug fix patch depends on.
We can apply those codes for the back-patch, but since the next minor
version release is the final one for v9.5, it's risky to do that. If we
unexpectedly introduce new bug to v9.5 by the back-patch, there is no
chance to fix that. We determined that the back-patch to v9.5 would give
more risk than gain.
Author: Fujii Masao
Reviewed-by: Bertrand Drouvot, Masahiko Sawada, Kyotaro Horiguchi
Discussion: https://postgr.es/m/4041d6b6-cf24-a120-36fa-1294220f8243@oss.nttdata.com
Aside from being queriable via SHOW, this value is sent to the client
immediately at session startup, and again later on if the server gets
promoted to primary during the session. The immediate report will be
used in an upcoming patch to avoid an extra round trip when trying to
connect to a primary server.
Haribabu Kommi, Greg Nancarrow, Tom Lane; reviewed at various times
by Laurenz Albe, Takayuki Tsunakawa, Peter Smith.
Discussion: https://postgr.es/m/CAF3+xM+8-ztOkaV9gHiJ3wfgENTq97QcjXQt+rbFQ6F7oNzt9A@mail.gmail.com
In power_var_int(), the computation of the number of significant
digits to use in the computation used log(Abs(exp)), which isn't safe
because Abs(exp) returns INT_MIN when exp is INT_MIN. Use fabs()
instead of Abs(), so that the exponent is cast to a double before the
absolute value is taken.
Back-patch to 9.6, where this was introduced (by 7d9a4737c2).
Discussion: https://postgr.es/m/CAEZATCVd6pMkz=BrZEgBKyqqJrt2xghr=fNc8+Z=5xC6cgWrWA@mail.gmail.com
Bring heap and hash rmgr desc output in line with nbtree and GiST desc
output by using the name latestRemovedXid for all fields that output the
contents of the latestRemovedXid field from the WAL record's C struct
(stop using local variants).
This seems like a clear improvement because latestRemovedXid is a symbol
name that already appears across many different source files, and so is
probably much more recognizable.
Discussion: https://postgr.es/m/CAH2-Wzkt_Rs4VqPSCk87nyjPAAEmWL8STU9zgET_83EF5YfrLw@mail.gmail.com
If the substring start index and length overflow when added together,
substring() misbehaved, either throwing a bogus "negative substring
length" error on a case that should succeed, or failing to complain that
a negative length is negative (and instead returning the whole string,
in most cases). Unsurprisingly, the text, bytea, and bit variants of
the function all had this issue. Rearrange the logic to ensure that
negative lengths are always rejected, and add an overflow check to
handle the other case.
Also install similar guards into detoast_attr_slice() (nee
heap_tuple_untoast_attr_slice()), since it's far from clear that
no other code paths leading to that function could pass it values
that would overflow.
Patch by myself and Pavel Stehule, per bug #16804 from Rafi Shamim.
Back-patch to v11. While these bugs are old, the common/int.h
infrastructure for overflow-detecting arithmetic didn't exist before
commit 4d6ad3125, and it doesn't seem like these misbehaviors are bad
enough to justify developing a standalone fix for the older branches.
Discussion: https://postgr.es/m/16804-f4eeeb6c11ba71d4@postgresql.org
Performance issues with the preceding patch to re-implement array
element assignment within pl/pgsql led me to realize that the read/write
parameter mechanism is misdesigned. Instead of requiring the assignment
source expression to be such that *all* its references to the target
variable could be passed as R/W, we really want to identify *one*
reference to the target variable to be passed as R/W, allowing any other
ones to be passed read/only as they would be by default. As long as the
R/W reference is a direct argument to the top-level (hence last to be
executed) function in the expression, there is no harm in R/O references
being passed to other lower parts of the expression. Nor is there any
use-case for more than one argument of the top-level function being R/W.
Hence, rewrite that logic to identify one single Param that references
the target variable, and make only that Param pass a read/write
reference, not any other Params referencing the target variable.
Discussion: https://postgr.es/m/4165684.1607707277@sss.pgh.pa.us
Invent new RawParseModes that allow the core grammar to handle
pl/pgsql expressions and assignments directly, and thereby get rid
of a lot of hackery in pl/pgsql's parser. This moves a good deal
of knowledge about pl/pgsql into the core code: notably, we have to
invent a CoercionContext that matches pl/pgsql's (rather dubious)
historical behavior for assignment coercions. That's getting away
from the original idea of pl/pgsql as an arm's-length extension of
the core, but really we crossed that bridge a long time ago.
The main advantage of doing this is that we can now use the core
parser to generate FieldStore and/or SubscriptingRef nodes to handle
assignments to pl/pgsql variables that are records or arrays. That
fixes a number of cases that had never been implemented in pl/pgsql
assignment, such as nested records and array slicing, and it allows
pl/pgsql assignment to support the datatype-specific subscripting
behaviors introduced in commit c7aba7c14.
There are cosmetic benefits too: when a syntax error occurs in a
pl/pgsql expression, the error report no longer includes the confusing
"SELECT" keyword that used to get prefixed to the expression text.
Also, there seem to be some small speed gains.
Discussion: https://postgr.es/m/4165684.1607707277@sss.pgh.pa.us
This patch essentially allows gram.y to implement a family of related
syntax trees, rather than necessarily always parsing a list of SQL
statements. raw_parser() gains a new argument, enum RawParseMode,
to say what to do. As proof of concept, add a mode that just parses
a TypeName without any other decoration, and use that to greatly
simplify typeStringToTypeName().
In addition, invent a new SPI entry point SPI_prepare_extended() to
allow SPI users (particularly plpgsql) to get at this new functionality.
In hopes of making this the last variant of SPI_prepare(), set up its
additional arguments as a struct rather than direct arguments, and
promise that future additions to the struct can default to zero.
SPI_prepare_cursor() and SPI_prepare_params() can perhaps go away at
some point.
Discussion: https://postgr.es/m/4165684.1607707277@sss.pgh.pa.us
This patch allows PREPARE-time decoding of two-phase transactions (if the
output plugin supports this capability), in which case the transactions
are replayed at PREPARE and then committed later when COMMIT PREPARED
arrives.
Now that we decode the changes before the commit, the concurrent aborts
may cause failures when the output plugin consults catalogs (both system
and user-defined).
We detect such failures with a special sqlerrcode
ERRCODE_TRANSACTION_ROLLBACK introduced by commit 7259736a6e and stop
decoding the remaining changes. Then we rollback the changes when rollback
prepared is encountered.
Author: Ajin Cherian and Amit Kapila based on previous work by Nikhil Sontakke and Stas Kelvich
Reviewed-by: Amit Kapila, Peter Smith, Sawada Masahiko, Arseny Sher, and Dilip Kumar
Tested-by: Takamichi Osumi
Discussion:
https://postgr.es/m/02DA5F5E-CECE-4D9C-8B4B-418077E2C010@postgrespro.ruhttps://postgr.es/m/CAMGcDxeqEpWj3fTXwqhSwBdXd2RS9jzwWscO-XbeCfso6ts3+Q@mail.gmail.com
On further reflection it seems better to call PageGetMaxOffsetNumber()
after acquiring a buffer lock on the page. This shouldn't really
matter, but doing it this way is cleaner.
Follow-up to commit 42288174.
Backpatch: 12-, just like commit 42288174
The logic for determining the latest removed XID for the purposes of
generating recovery conflicts in REDO routines was subtly broken. It
failed to follow links from HOT chains, and so failed to consider all
relevant heap tuple headers in some cases.
To fix, expand the loop that deals with LP_REDIRECT line pointers to
also deal with HOT chains. The new version of the loop is loosely based
on a similar loop from heap_prune_chain().
The impact of this bug is probably quite limited, since the horizon code
necessarily deals with heap tuples that are pointed to by LP_DEAD-set
index tuples. The process of setting LP_DEAD index tuples (e.g. within
the kill_prior_tuple mechanism) is highly correlated with opportunistic
pruning of pointed-to heap tuples. Plus the question of generating a
recovery conflict usually comes up some time after index tuple LP_DEAD
bits were initially set, unlike heap pruning, where a latestRemovedXid
is generated at the point of the pruning operation (heap pruning has no
deferred "would-be page split" style processing that produces conflicts
lazily).
Only backpatch to Postgres 12, the first version where this logic runs
during original execution (following commit 558a9165e0). The index
latestRemovedXid mechanism has had the same bug since it first appeared
over 10 years ago (in commit a760893d), but backpatching to all
supported versions now seems like a bad idea on balance. Running the
new improved code during recovery seems risky, especially given the lack
of complaints from the field.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-Wz=Eib393+HHcERK_9MtgNS7Ew1HY=RDC_g6GL46zM5C6Q@mail.gmail.com
Backpatch: 12-
This commit preserves the logic of multirange_in() but makes it more clear
what's going on. Also, this commit fixes the compiler warning spotted by the
buildfarm.
Reported-by: Tom Lane
Discussion: https://postgr.es/m/2246043.1609290699%40sss.pgh.pa.us
Since at least 2001 we've used putenv() and avoided setenv(), on the
grounds that the latter was unportable and not in POSIX. However,
POSIX added it that same year, and by now the situation has reversed:
setenv() is probably more portable than putenv(), since POSIX now
treats the latter as not being a core function. And setenv() has
cleaner semantics too. So, let's reverse that old policy.
This commit adds a simple src/port/ implementation of setenv() for
any stragglers (we have one in the buildfarm, but I'd not be surprised
if that code is never used in the field). More importantly, extend
win32env.c to also support setenv(). Then, replace usages of putenv()
with setenv(), and get rid of some ad-hoc implementations of setenv()
wannabees.
Also, adjust our src/port/ implementation of unsetenv() to follow the
POSIX spec that it returns an error indicator, rather than returning
void as per the ancient BSD convention. I don't feel a need to make
all the call sites check for errors, but the portability stub ought
to match real-world practice.
Discussion: https://postgr.es/m/2065122.1609212051@sss.pgh.pa.us
Attempt to get selectivity estimation for @> (anymultirange, anyrange) operator
caused an error in buildfarm, because this operator was missed in switch()
of calc_hist_selectivity(). Fix that and also make regression tests reliably
check that selectivity estimation for (multi)ranges doesn't fall. Previously,
whether we test selectivity estimation for (multi)ranges depended on
whether autovacuum managed to gather concurrently to the test.
Reported-by: Michael Paquier
Discussion: https://postgr.es/m/X%2BwmgjRItuvHNBeV%40paquier.xyz
secure_open_gssapi() installed the krb_server_keyfile setting as
KRB5_KTNAME unconditionally, so long as it's not empty. However,
pg_GSS_recvauth() only installed it if KRB5_KTNAME wasn't set already,
leading to a troubling inconsistency: in theory, clients could see
different sets of server principal names depending on whether they
use GSSAPI encryption. Always using krb_server_keyfile seems like
the right thing, so make both places do that. Also fix up
secure_open_gssapi()'s lack of a check for setenv() failure ---
it's unlikely, surely, but security-critical actions are no place
to be sloppy.
Also improve the associated documentation.
This patch does nothing about secure_open_gssapi()'s use of setenv(),
and indeed causes pg_GSS_recvauth() to use it too. That's nominally
against project portability rules, but since this code is only built
with --with-gssapi, I do not feel a need to do something about this
in the back branches. A fix will be forthcoming for HEAD though.
Back-patch to v12 where GSSAPI encryption was introduced. The
dubious behavior in pg_GSS_recvauth() goes back further, but it
didn't have anything to be inconsistent with, so let it be.
Discussion: https://postgr.es/m/2187460.1609263156@sss.pgh.pa.us
IF NOT EXISTS was ignored when specified in an EXPLAIN query for CREATE
MATERIALIZED VIEW or CREATE TABLE AS. Hence, if this clause was
specified, the caller would get a failure if the relation already
exists instead of a success with a NOTICE message.
This commit makes the behavior of IF NOT EXISTS in EXPLAIN consistent
with the non-EXPLAIN'd DDL queries, preventing a failure with IF NOT
EXISTS if the relation to-be-created already exists. The skip is done
before the SELECT query used for the relation is planned or executed,
and a "dummy" plan is generated instead depending on the format used by
EXPLAIN.
Author: Bharath Rupireddy
Reviewed-by: Zhijie Hou, Michael Paquier
Discussion: https://postgr.es/m/CALj2ACVa3oJ9O_wcGd+FtHWZds04dEKcakxphGz5POVgD4wC7Q@mail.gmail.com
This adds six methods to the output plugin API, adding support for
streaming changes of two-phase transactions at prepare time.
* begin_prepare
* filter_prepare
* prepare
* commit_prepared
* rollback_prepared
* stream_prepare
Most of this is a simple extension of the existing methods, with the
semantic difference that the transaction is not yet committed and maybe
aborted later.
Until now two-phase transactions were translated into regular transactions
on the subscriber, and the GID was not forwarded to it. None of the
two-phase commands were communicated to the subscriber.
This patch provides the infrastructure for logical decoding plugins to be
informed of two-phase commands Like PREPARE TRANSACTION, COMMIT PREPARED
and ROLLBACK PREPARED commands with the corresponding GID.
This also extends the 'test_decoding' plugin, implementing these new
methods.
This commit simply adds these new APIs and the upcoming patch to "allow
the decoding at prepare time in ReorderBuffer" will use these APIs.
Author: Ajin Cherian and Amit Kapila based on previous work by Nikhil Sontakke and Stas Kelvich
Reviewed-by: Amit Kapila, Peter Smith, Sawada Masahiko, and Dilip Kumar
Discussion:
https://postgr.es/m/02DA5F5E-CECE-4D9C-8B4B-418077E2C010@postgrespro.ruhttps://postgr.es/m/CAMGcDxeqEpWj3fTXwqhSwBdXd2RS9jzwWscO-XbeCfso6ts3+Q@mail.gmail.com
When the postmaster sends SIGQUIT to its children, there's no real
need for all the children to log that fact; the postmaster already
made a log entry about it, so adding perhaps dozens or hundreds of
child-process log entries adds nothing of value. So, let's introduce
a new ereport level to specify "WARNING, but never send to log" and
use that for these messages.
Such a change wouldn't have been desirable before commit 7e784d1dc,
because if someone manually SIGQUIT's a backend, we *do* want to log
that. But now we can tell the difference between a signal that was
issued by the postmaster and one that was not with reasonable
certainty.
While we're here, also clear error_context_stack before ereport'ing,
to prevent error callbacks from being invoked in the signal-handler
context. This should reduce the odds of getting hung up while trying
to notify the client.
Per a suggestion from Andres Freund.
Discussion: https://postgr.es/m/20201225230331.hru3u6obyy6j53tk@alap3.anarazel.de
6df7a9698b has introduced a set of operators between ranges and multiranges.
Existing GiST indexes for ranges could easily support majority of them.
This commit adds support for new operators to the existing range GiST indexes.
New operators resides the same strategy numbers as existing ones. Appropriate
check function is determined using the subtype.
Catversion is bumped.
There is a set of *_internal() functions exposed in
include/utils/multirangetypes.h. This commit improves the signatures of these
functions in two ways.
* Add const qualifies where applicable.
* Replace multirange typecache argument with range typecache argument.
Multirange typecache was used solely to find the range typecache. At the
same time, range typecache is easier for the caller to find.
We have operators for checking if the multirange contains a range but don't
have the opposite. This commit improves completeness of the operator set by
adding two new operators: @> (anyrange,anymultirange) and
<@(anymultirange,anyrange).
Catversion is bumped.
Two functions multirange_range_overlaps_bsearch_comparison() and
multirange_range_contains_bsearch_comparison() contain bugs of returning -1
instead of 1. This commit fixes these bugs and adds corresponding regression
tests.
Include details on whether GSS encryption has been activated;
since we added "hostgssenc" type HBA entries, that's relevant info.
Kyotaro Horiguchi and Tom Lane. Back-patch to v12 where
GSS encryption was introduced.
Discussion: https://postgr.es/m/e5b0b6ed05764324a2f3fe7acfc766d5@smhi.se
Unrecoverable errors detected by GSSAPI encryption can't just be
reported with elog(ERROR) or elog(FATAL), because attempting to
send the error report to the client is likely to lead to infinite
recursion or loss of protocol sync. Instead make this code do what
the SSL encryption code has long done, which is to just report any
such failure to the server log (with elevel COMMERROR), then pretend
we've lost the connection by returning errno = ECONNRESET.
Along the way, fix confusion about whether message translation is done
by pg_GSS_error() or its callers (the latter should do it), and make
the backend version of that function work more like the frontend
version.
Avoid allocating the port->gss struct until it's needed; we surely
don't need to allocate it in the postmaster.
Improve logging of "connection authorized" messages with GSS enabled.
(As part of this, I back-patched the code changes from dc11f31a1.)
Make BackendStatusShmemSize() account for the GSS-related space that
will be allocated by CreateSharedBackendStatus(). This omission
could possibly cause out-of-shared-memory problems with very high
max_connections settings.
Remove arbitrary, pointless restriction that only GSS authentication
can be used on a GSS-encrypted connection.
Improve documentation; notably, document the fact that libpq now
prefers GSS encryption over SSL encryption if both are possible.
Per report from Mikael Gustavsson. Back-patch to v12 where
this code was introduced.
Discussion: https://postgr.es/m/e5b0b6ed05764324a2f3fe7acfc766d5@smhi.se
The code in charge of processing a single invalidation message has been
using since 568d413 the structure for relation mapping messages. This
had fortunately no consequence as both locate the database ID at the
same location, but it could become a problem in the future if this area
of the code changes.
Author: Konstantin Knizhnik
Discussion: https://postgr.es/m/8044c223-4d3a-2cdb-42bf-29940840ce94@postgrespro.ru
Backpatch-through: 9.5
The patch needs test cases, reorganization, and cfbot testing.
Technically reverts commits 5c31afc49d..e35b2bad1a (exclusive/inclusive)
and 08db7c63f3..ccbe34139b.
Reported-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/E1ktAAG-0002V2-VB@gemulon.postgresql.org
Before processing tuples, agg_refill_hash_table() was setting all
pergroup pointers to NULL to signal to advance_aggregates() that it
should not attempt to advance groups that had spilled.
The problem was that it also set the pergroups for sorted grouping
sets to NULL, which caused rescanning to fail.
Instead, change agg_refill_hash_table() to only set the pergroups for
hashed grouping sets to NULL; and when compiling the expression, pass
doSort=false.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/16784-7ff169bf2c3d1588%40postgresql.org
Backpatch-through: 13
This makes existing sessions reflect "ALTER ROLE ... [NO]INHERIT" as
quickly as they have been reflecting "GRANT role_name". Back-patch to
9.5 (all supported versions).
Reviewed by Nathan Bossart.
Discussion: https://postgr.es/m/20201221095028.GB3777719@rfd.leadboat.com
This adds a key management system that stores (currently) two data
encryption keys of length 128, 192, or 256 bits. The data keys are
AES256 encrypted using a key encryption key, and validated via GCM
cipher mode. A command to obtain the key encryption key must be
specified at initdb time, and will be run at every database server
start. New parameters allow a file descriptor open to the terminal to
be passed. pg_upgrade support has also been added.
Discussion: https://postgr.es/m/CA+fd4k7q5o6Nc_AaX6BcYM9yqTbC6_pnH-6nSD=54Zp6NBQTCQ@mail.gmail.com
Discussion: https://postgr.es/m/20201202213814.GG20285@momjian.us
Author: Masahiko Sawada, me, Stephen Frost
If a database shutdown (smart or fast) is commanded between the time
some process decides to request a new background worker and the time
that the postmaster can launch that worker, then nothing happens
because the postmaster won't launch any bgworkers once it's exited
PM_RUN state. This is fine ... unless the requesting process is
waiting for that worker to finish (or even for it to start); in that
case the requestor is stuck, and only manual intervention will get us
to the point of being able to shut down.
To fix, cancel pending requests for workers when the postmaster sends
shutdown (SIGTERM) signals, and similarly cancel any new requests that
arrive after that point. (We can optimize things slightly by only
doing the cancellation for workers that have waiters.) To fit within
the existing bgworker APIs, the "cancel" is made to look like the
worker was started and immediately stopped, causing deregistration of
the bgworker entry. Waiting processes would have to deal with
premature worker exit anyway, so this should introduce no bugs that
weren't there before. We do have a side effect that registration
records for restartable bgworkers might disappear when theoretically
they should have remained in place; but since we're shutting down,
that shouldn't matter.
Back-patch to v10. There might be value in putting this into 9.6
as well, but the management of bgworkers is a bit different there
(notably see 8ff518699) and I'm not convinced it's worth the effort
to validate the patch for that branch.
Discussion: https://postgr.es/m/661570.1608673226@sss.pgh.pa.us
Up to now, if the DBA issued "pg_ctl stop -m immediate", the message
sent to clients was the same as for a crash-and-restart situation.
This is confusing, not least because the message claims that the
database will soon be up again, something we have no business
predicting.
Improve things so that we can generate distinct messages for the two
cases (and also recognize an ad-hoc SIGQUIT, should somebody try that).
To do that, add a field to pmsignal.c's shared memory data structure
that the postmaster sets just before broadcasting SIGQUIT to its
children. No interlocking seems to be necessary; the intervening
signal-sending and signal-receipt should sufficiently serialize accesses
to the field. Hence, this isn't any riskier than the existing usages
of pmsignal.c.
We might in future extend this idea to improve other
postmaster-to-children signal scenarios, although none of them
currently seem to be as badly overloaded as SIGQUIT.
Discussion: https://postgr.es/m/559291.1608587013@sss.pgh.pa.us
Tom Lane
Andres Freund
Robert Haas
David Rowley
Amit Kapila
Tomas Vondra
Peter Eisentraut
Michael Paquier
Heikki Linnakangas
Magnus Hagander
Noah Misch
Alvaro Herrera
Fujii Masao
Thomas Munro
Peter Geoghegan
Dean Rasheed
Bruce Momjian
Alexander Korotkov
Jeff Davis