by installing an error context subroutine that will provide the file name
and line number for all errors detected while reading a config file.
Some of the reader routines were already doing that in an ad-hoc way for
errors detected directly in the reader, but it didn't help for problems
detected in subroutines, such as encoding violations.
Back-patch to 8.3 because 8.3 is where people will be trying to debug
configuration files.
int2-and-int8 implementations of the basic arithmetic operators +, -, *, /.
This doesn't really add any new functionality, but it avoids "operator is not
unique" failures that formerly occurred in these cases because the parser
couldn't decide whether to promote the int2 to int4 or int8. We could
alternatively have removed the existing cross-type operators, but
experimentation shows that the cost of an additional type coercion expression
node is noticeable compared to such cheap operators; so let's not give up any
performance here. On the other hand, I removed the int2-and-int4 modulo (%)
operators since they didn't seem as important from a performance standpoint.
Per a complaint last January from ykhuang.
that it depends on for replan-forcing purposes. We need to consider plain OID
constants too, because eval_const_expressions folds a RelabelType atop a Const
to just a Const. This change could result in OID values that aren't really
for tables getting added to the dependency list, but the worst-case
consequence would be occasional useless replans. Per report from Gabriele
Messineo.
is necessary to avoid deadlock against ordinary queries, but we'd broken it
with recent changes that made the DROP machinery lock the index before
arriving at index_drop. Per intermittent buildfarm failures.
grammar allows ALTER TABLE/INDEX/SEQUENCE/VIEW interchangeably for all
subforms of those commands, and then we sort out what's really legal
at execution time. This allows the ALTER SEQUENCE/VIEW reference pages
to fully document all the ALTER forms available for sequences and views
respectively, and eliminates a longstanding cause of confusion for users.
The net effect is that the following forms are allowed that weren't before:
ALTER SEQUENCE OWNER TO
ALTER VIEW ALTER COLUMN SET/DROP DEFAULT
ALTER VIEW OWNER TO
ALTER VIEW SET SCHEMA
(There's no actual functionality gain here, but formerly you had to say
ALTER TABLE instead.)
Interestingly, the grammar tables actually get smaller, probably because
there are fewer special cases to keep track of.
I did not disallow using ALTER TABLE for these operations. Perhaps we
should, but there's a backwards-compatibility issue if we do; in fact
it would break existing pg_dump scripts. I did however tighten up
ALTER SEQUENCE and ALTER VIEW to reject non-sequences and non-views
in the new cases as well as a couple of cases where they didn't before.
The patch doesn't change pg_dump to use the new syntaxes, either.
objects are specified, we drop them all in a single performMultipleDeletions
call. This makes the RESTRICT/CASCADE checks more relaxed: it's not counted
as a cascade if one of the later objects has a dependency on an earlier one.
NOTICE messages about such cases go away, too.
In passing, fix the permissions check for DROP CONVERSION, which for some
reason was never made role-aware, and omitted the namespace-owner exemption
too.
Alex Hunsaker, with further fiddling by me.
the problem happened in. These are all supposedly can't-happen cases, but
when they do happen it's useful to know where.
Back-patch to 8.3, but not further because the patch doesn't apply cleanly
further back. Given the lack of response to my proposal of this, there
doesn't seem to be enough interest to justify much back-porting effort.
forks. XLogOpenRelation() and the associated light-weight relation cache in
xlogutils.c is gone, and XLogReadBuffer() now takes a RelFileNode as argument,
instead of Relation.
For functions that still need a Relation struct during WAL replay, there's a
new function called CreateFakeRelcacheEntry() that returns a fake entry like
XLogOpenRelation() used to.
devised for pg_shdepend, namely the individual dependencies are reported as
DETAIL lines rather than coming out as separate NOTICEs. The client-side
report is capped at 100 lines, but the server log always gets a full report.
CacheInvalidateRelcache() crashes if called in WAL recovery, because the
invalidation infrastructure hasn't been initialized yet.
Back-patch to 8.2, where the bug was introduced.
algorithm, replacing the original intention of a one-pass search, which
had been hacked up over time to be partially two-pass in hopes of handling
various corner cases better. It still wasn't quite there, especially as
regards emitting unwanted NOTICE messages. More importantly, this approach
lets us fix a number of open bugs concerning concurrent DROP scenarios,
because we can take locks during the first pass and avoid traversing to
dependent objects that were just deleted by someone else.
There is more that can be done here, but I'll go ahead and commit the
base patch before working on the options.
more logical that way, and also it reduces the amount of unnecessary includes
in bufpage.h, which is widely used.
Zdenek Kotala.
My previous patch to bufpage.h should also have credited him as author, but I
forgot (sorry about that).
patches that dealt with object ownership. It wasn't updating pg_shdepend
nor adjusting the aggregate's ACL. In 8.2 and up, fix this permanently
by making it use AlterFunctionOwner_oid. In 8.1, the function code wasn't
factored that way, so just copy and paste.
This is needed because :: casting binds more tightly than minus, so for
example -1::integer is not the same as (-1)::integer, and there are cases
where the difference is important. In particular this caused a failure
in SELECT DISTINCT ... ORDER BY ... where expressions that should have
matched were seen as different by the parser; but I suspect that there
could be other cases where failure to parenthesize leads to subtler
semantic differences in reloaded rules. Per report from Alexandr Popov.
the PARAM_FLAG_CONST flag on the parameters that are passed into the portal,
while the former's behavior is unchanged. This should only affect the case
where the portal is executing an EXPLAIN; it will cause the generated plan to
look more like what would be generated if the portal were actually executing
the command being explained. Per gripe from Pavel.
This is required on Windows due to the special locale
handling for UTF8 that doesn't change the full environment.
Fixes crash with translated error messages per bugs 4180
and 4196.
Tom Lane
the associated datatype as their equality member. This means that these
opclasses can now support plain equality comparisons along with LIKE tests,
thus avoiding the need for an extra index in some applications. This
optimization was not possible when the pattern opclasses were first introduced,
because we didn't insist that text equality meant bitwise equality; but we
do now, so there is no semantic difference between regular and pattern
equality operators.
I removed the name_pattern_ops opclass altogether, since it's really useless:
name's regular comparisons are just strcmp() and are unlikely to become
something different. Instead teach indxpath.c that btree name_ops can be
used for LIKE whether or not the locale is C. This might lead to a useful
speedup in LIKE queries on the system catalogs in non-C locales.
The ~=~ and ~<>~ operators are gone altogether. (It would have been nice to
keep them for backward compatibility's sake, but since the pg_amop structure
doesn't allow multiple equality operators per opclass, there's no way.)
A not-immediately-obvious incompatibility is that the sort order within
bpchar_pattern_ops indexes changes --- it had been identical to plain
strcmp, but is now trailing-blank-insensitive. This will impact
in-place upgrades, if those ever happen.
Per discussions a couple months ago.
called before, not after, calling the assign_hook if any. This is because
push_old_value might fail (due to palloc out-of-memory), and in that case
there would be no stack entry to tell transaction abort to undo the GUC
assignment. Of course the actual assignment to the GUC variable hasn't
happened yet --- but the assign_hook might have altered subsidiary state.
Without a stack entry we won't call it again to make it undo such actions.
So this is necessary to make the world safe for assign_hooks with side
effects. Per a discussion a couple weeks ago with Magnus.
Back-patch to 8.0. 7.x did not have the problem because it did not have
allocatable stacks of GUC values.
to go beoynd 10MB, as demonstrated by Gavin Sharry's example of dropping a
schema with ~25000 objects. The really bogus thing about the limit was that
it was enforced when a state file file was read in, not when it was written,
so you would end up with a prepared transaction that you can't commit or
abort, and the only recourse was to shut down the server and remove the file
by hand.
Raise the limit to MaxAllocSize, and enforce it also when a state file is
written. We could've removed the limit altogether, but reading in a file
larger than MaxAllocSize would fail anyway because we read it into a
palloc'd buffer.
Backpatch down to 8.1, where 2PC and this issue was introduced.
Formerly, the default value of wal_sync_method was determined inside xlog.c,
but now it is determined inside guc.c. guc.c was reading xlogdefs.h
without having read <fcntl.h>, leading to wrong determination of
DEFAULT_SYNC_METHOD. Obviously xlogdefs.h needs to include <fcntl.h>
for itself to ensure stable results.
sequence to be reset to its original starting value. This requires adding the
original start value to the set of parameters (columns) of a sequence object,
which is a user-visible change with potential compatibility implications;
it also forces initdb.
Also add hopefully-SQL-compatible RESTART/CONTINUE IDENTITY options to
TRUNCATE TABLE. RESTART IDENTITY executes ALTER SEQUENCE RESTART for all
sequences "owned by" any of the truncated relations. CONTINUE IDENTITY is
a no-op option.
Zoltan Boszormenyi
functions.
Note that because this patch changes FmgrInfo, any external C functions
you might be testing with 8.4 will need to be recompiled.
Patch by Martin Pihlak, some editorialization by me (principally, removing
tracking of getrusage() numbers)
file portability/instr_time.h, and add a couple more macros to eliminate
some abstraction leakage we formerly had. Also update psql to use this
header instead of its own copy of nearly the same code.
This commit in itself is just code cleanup and shouldn't change anything.
It lays some groundwork for the upcoming function-stats patch, though.
Tom Lane
Bruce Momjian
Heikki Linnakangas
Neil Conway
Alvaro Herrera
Magnus Hagander
Michael Meskes
Andrew Dunstan