When using the following functions, users could see various types of
errors of the type "cache lookup failed for OID XXX" with elog(), that
can only be used for internal errors:
* pg_describe_object()
* pg_identify_object()
* pg_identify_object_as_address()
The set of APIs managing object addresses for all object types are made
smarter by gaining a new argument "missing_ok" that allows any caller to
control if an error is raised or not on an undefined object. The SQL
functions listed above are changed to handle the case where an object is
missing.
Regression tests are added for all object types for the cases where
these are undefined. Before this commit, these cases failed with cache
lookup errors, and now they basically return NULL (minus the name of the
object type requested).
Author: Michael Paquier
Reviewed-by: Aleksander Alekseev, Dmitry Dolgov, Daniel Gustafsson,
Álvaro Herrera, Kyotaro Horiguchi
Discussion: https://postgr.es/m/CAB7nPqSZxrSmdHK-rny7z8mi=EAFXJ5J-0RbzDw6aus=wB5azQ@mail.gmail.com
reparameterize_path_by_child() failed to reparameterize BitmapAnd
and BitmapOr paths. This matters only if such a path is chosen as
the inside of a nestloop partition-wise join, where we have to pass
in parameters from the outside of the nestloop. If that did happen,
we generated a bad plan that would likely lead to crashes at execution.
This is not entirely reparameterize_path_by_child()'s fault though;
it's the victim of an ancient decision (my ancient decision, I think)
to not bother filling in param_info in BitmapAnd/Or path nodes. That
caused the function to believe that such nodes and their children
contain no parameter references and so need not be processed.
In hindsight that decision looks pretty penny-wise and pound-foolish:
while it saves a few cycles during path node setup, we do commonly
need the information later. In particular, by reversing the decision
and requiring valid param_info data in all nodes of a bitmap path
tree, we can get rid of indxpath.c's get_bitmap_tree_required_outer()
function, which computed the data on-demand. It's not unlikely that
that nets out as a savings of cycles in many scenarios. A couple
of other things in indxpath.c can be simplified as well.
While here, get rid of some cases in reparameterize_path_by_child()
that are visibly dead or useless, given that we only care about
reparameterizing paths that can be on the inside of a parameterized
nestloop. This case reminds one of the maxim that untested code
probably does not work, so I'm unwilling to leave unreachable code
in this function. (I did leave the T_Gather case in place even
though it's not reached in the regression tests. It's not very
clear to me when the planner might prefer to put Gather below
rather than above a nestloop, but at least in principle the case
might be interesting.)
Per bug #16536, originally from Arne Roland but with a test case
by Andrew Gierth. Back-patch to v11 where this code came in.
Discussion: https://postgr.es/m/16536-2213ee0b3aad41fd@postgresql.org
Three groups of issues needed to be addressed:
load_external_function() and related functions returned PGFunction,
even though not necessarily all callers are looking for a function of
type PGFunction. Since these functions are really just wrappers
around dlsym(), change to return void * just like dlsym().
In dynahash.c, we are using strlcpy() where a function with a
signature like memcpy() is expected. This should be safe, as the new
comment there explains, but the cast needs to be augmented to avoid
the warning.
In PL/Python, methods all need to be cast to PyCFunction, per Python
API, but this now runs afoul of these warnings. (This issue also
exists in core CPython.)
To fix the second and third case, we add a new type pg_funcptr_t that
is defined specifically so that gcc accepts it as a special function
pointer that can be cast to any other function pointer without the
warning.
Also add -Wcast-function-type to the standard warning flags, subject
to configure check.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/1e97628e-6447-b4fd-e230-d109cec2d584%402ndquadrant.com
An ALTER TABLE to validate a foreign key in which another subcommand
already caused a pending table rewrite could fail due to ALTER TABLE
attempting to validate the foreign key before the actual table rewrite
takes place. This situation could result in an error such as:
ERROR: could not read block 0 in file "base/nnnnn/nnnnn": read only 0 of 8192 bytes
The failure here was due to the SPI call which validates the foreign key
trying to access an index which is yet to be rebuilt.
Similarly, we also incorrectly tried to validate CHECK constraints before
the heap had been rewritten.
The fix for both is to delay constraint validation until phase 3, after
the table has been rewritten. For CHECK constraints this means a slight
behavioral change. Previously ALTER TABLE VALIDATE CONSTRAINT on
inheritance tables would be validated from the bottom up. This was
different from the order of evaluation when a new CHECK constraint was
added. The changes made here aligns the VALIDATE CONSTRAINT evaluation
order for inheritance tables to be the same as ADD CONSTRAINT, which is
generally top-down.
Reported-by: Nazli Ugur Koyluoglu, using SQLancer
Discussion: https://postgr.es/m/CAApHDvp%3DZXv8wiRyk_0rWr00skhGkt8vXDrHJYXRMft3TjkxCA%40mail.gmail.com
Backpatch-through: 9.5 (all supported versions)
Incorrect function names were referenced. As this fixes some portions
of tableam.h, that is mentioned in the docs as something to look at when
implementing a table AM, backpatch down to 12 where this has been
introduced.
Author: Hironobu Suzuki
Discussion: https://postgr.es/m/8fe6d672-28dd-3f1d-7aed-ac2f6d599d3f@interdb.jp
Backpatch-through: 12
The qual pushdown logic assumed that all Vars in a restriction clause
must be Vars referencing subquery outputs; but since we introduced
LATERAL, it's possible for such a Var to be a lateral reference instead.
This led to an assertion failure in debug builds. In a non-debug
build, there might be no ill effects (if qual_is_pushdown_safe decided
the qual was unsafe anyway), or we could get failures later due to
construction of an invalid plan. I've not gone to much length to
characterize the possible failures, but at least segfaults in the
executor have been observed.
Given that this has been busted since 9.3 and it took this long for
anybody to notice, I judge that the case isn't worth going to great
lengths to optimize. Hence, fix by just teaching qual_is_pushdown_safe
that such quals are unsafe to push down, matching the previous behavior
when it accidentally didn't fail.
Per report from Tom Ellis. Back-patch to all supported branches.
Discussion: https://postgr.es/m/20200713175124.GQ8220@cloudinit-builder
Remove previous hack in KeepLogSeg that added a case to deal with a
(badly represented) invalid segment number. This was added for the sake
of GetWALAvailability. But it's not needed if in that function we
initialize the segment number to be retreated to the currently being
written segment, so do that instead.
Per valgrind-running buildfarm member skink, and some sparc64 animals.
Discussion: https://postgr.es/m/1724648.1594230917@sss.pgh.pa.us
The stats with this commit was available only for WALSenders, however,
users might want to see for backends doing logical decoding via SQL API.
Then, users might want to reset and access these stats across server
restart which was not possible with the current patch.
List of commits reverted:
caa3c4242c Don't call elog() while holding spinlock.
e641b2a995 Doc: Update the documentation for spilled transaction
statistics.
5883f5fe27 Fix unportable printf format introduced in commit 9290ad198.
9290ad198b Track statistics for spilling of changes from ReorderBuffer.
Additionaly, remove the release notes entry for this feature.
Backpatch-through: 13, where it was introduced
Discussion: https://postgr.es/m/CA+fd4k5_pPAYRTDrO2PbtTOe0eHQpBvuqmCr8ic39uTNmR49Eg@mail.gmail.com
This includes two changes:
- Addition of a new function pg_xact_commit_timestamp_origin() able, for
a given transaction ID, to return the commit timestamp and replication
origin of this transaction. An equivalent function existed in
pglogical.
- Addition of the replication origin to pg_last_committed_xact().
The commit timestamp manager includes already APIs able to return the
replication origin of a transaction on top of its commit timestamp, but
the code paths for replication origins were never stressed as those
functions have never looked for a replication origin, and the SQL
functions available have never included this information since their
introduction in 73c986a.
While on it, refactor a test of modules/commit_ts/ to use tstzrange() to
check that a transaction timestamp is within the wanted range, making
the test a bit easier to read.
Bump catalog version.
Author: Movead Li
Reviewed-by: Madan Kumar, Michael Paquier
Discussion: https://postgr.es/m/2020051116430836450630@highgo.ca
The raw_buf and line_buf buffers aren't used when reading binary format,
so skip allocating them. raw_buf is 64K so that seems like a worthwhile
savings. An unused line_buf only wastes 1K, but as long as we're checking
it's free to avoid allocating that too.
Bharath Rupireddy, tweaked a bit by me
Discussion: https://postgr.es/m/CALj2ACXcCKaGPY0whowqrJ4OPJvDnTssgpGCzvuFQu5z0CXb-g@mail.gmail.com
"relkind" normally refers to the char field from pg_class. However, in
the parse nodes AlterTableStmt and CreateTableAsStmt, "relkind" was used
for a field of type enum ObjectType, that could refer to other object
types than those possible for a relkind. Such fields being usually
named "objtype", switch the name in both structures to make things more
consistent. Note that this led to some confusion in functions that
also operate on a RangeTableEntry object, which also has a field named
"relkind".
This naming goes back to commit 09d4e96, where only OBJECT_TABLE and
OBJECT_INDEX were used. This got extended later to use as well
OBJECT_TYPE with e440e12, not really a relation kind.
Author: Mark Dilger
Reviewed-by: Daniel Gustafsson, Álvaro Herrera, Michael Paquier
Discussion: https://postgr.es/m/609181AE-E399-47C7-9221-856E0F96BF93@enterprisedb.com
SQL standard doesn't define numeric Inf or NaN values. It appears even more
ridiculous to support then in jsonpath assuming JSON doesn't support these
values as well. This commit forbids returning NaN from .double(), which was
previously allowed. NaN can't be result of inner-jsonpath computation over
non-NaNs. So, we can not expect NaN in the jsonpath output.
Reported-by: Tom Lane
Discussion: https://postgr.es/m/203949.1591879542%40sss.pgh.pa.us
Author: Alexander Korotkov
Reviewed-by: Tom Lane
Backpatch-through: 12
When jsonpath .double() method detects that numeric or string can't be
converted to double precision, it throws an error. This commit makes these
errors explicitly express the reason of failure.
Discussion: https://postgr.es/m/CAPpHfdtqJtiSXkP7tOXez18NxhLUH_-75bL8%3DOce4Ki%2Bbv7V6Q%40mail.gmail.com
Author: Alexander Korotkov
Reviewed-by: Tom Lane
Backpatch-through: 12
This message was being emitted on the grounds that only crashed
summarization could cause it, but in reality even an aborted vacuum
could do it ... which makes it way too noisy, particularly since it
shows up in regression tests and makes them die.
Reported by Tom Lane.
Discussion: https://postgr.es/m/489091.1593534251@sss.pgh.pa.us
Due to not having our signals straight about CRLF vs. LF line
termination, the output of pg_current_logfile() included a trailing
\r on Windows. To fix, force the file descriptor it uses into text
mode.
While here, move a couple of local variable declarations to make
the function's logic clearer.
In v12 and v13, also back-patch the test added by 1c4e88e2f so that
this function has some test coverage. However, the 004_logrotate.pl
test script doesn't exist before v12, and it didn't seem worth adding
to older branches just for this.
Per report from Thomas Kellerer. Back-patch to v10 where this
function was added.
Discussion: https://postgr.es/m/412ae8da-76bb-640f-039a-f3513499e53d@gmx.net
The Sort node does not put a space between the number of kilobytes and
the "kB" of memory or disk space used, but HashAgg does. Here we align
HashAgg to do the same as Sort. Sort has been displaying this
information for longer than HashAgg, so it makes sense to align HashAgg
to Sort rather than the other way around.
Reported-by: Justin Pryzby
Discussion: https://postgr.es/m/20200708163021.GW4107@telsasoft.com
Backpatch-through: 13, where the hashagg started showing these details
Since slot_keep_segs indicates the number of WAL segments not LSN,
its datatype should not be XLogRecPtr.
Back-patch to v13 where this issue was added.
Reported-by: Atsushi Torikoshi
Author: Atsushi Torikoshi, tweaked by Fujii Masao
Discussion: https://postgr.es/m/ebd0d674f3e050222238a960cac5251a@oss.nttdata.com
Commit f7f70d5e2 left one inconsistency behind: we're still creating
pg_type entries for the composite types of sequences and toast tables,
but not arrays over those composites. But there seems precious little
reason to have named composite types for toast tables, and not much more
to have them for sequences (especially given the thought that sequences
may someday not be standalone relations at all).
So, let's close that inconsistency by removing these composite types,
rather than adding arrays for them. This buys back a little bit of
the initial pg_type bloat added by the previous patch, and could be
a significant savings in a large database with many toast tables.
Aside from a small logic rearrangement in heap_create_with_catalog,
this patch mostly needs to clean up some places that were assuming that
pg_class.reltype always has a valid value. Those are really pre-existing
bugs, given that it's documented otherwise; notably, the plpgsql changes
fix code that gives "cache lookup failed for type 0" on indexes today.
But none of these seem interesting enough to back-patch.
Also, remove the pg_dump/pg_upgrade infrastructure for propagating
a toast table's pg_type OID into the new database, since we no longer
need that.
Discussion: https://postgr.es/m/761F1389-C6A8-4C15-80CE-950C961F5341@gmail.com
The previous definition of the column was almost universally disliked,
so provide this updated definition which is more useful for monitoring
purposes: a large positive value is good, while zero or a negative value
means danger. This should be operationally more convenient.
Backpatch to 13, where the new column to pg_replication_slots (and the
feature it represents) were added.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Discussion: https://postgr.es/m/9ddfbf8c-2f67-904d-44ed-cf8bc5916228@oss.nttdata.com
Previously we checked that the ssl pointer was not null, but this puts a
requirement on there being such a pointer which may not be true in
future multi-ssl-library supporting times. This seems to have been an
oversight in 9029f4b374, but hasn't really had any effect since we only
have one library.
Author: Daniel Gustafsson
nbtree index builds cannot write out an empty page. That would mean
that there was no way to create a pivot tuple pointing to the page one
level up, since _bt_truncate() generates one based on page's firstright
tuple.
Replace the unnecessary PageIsEmpty() check with an assertion that
checks that the page has space for at least two line pointers (the
would-be high key line pointer, plus at least one valid "data item"
tuple line pointer).
The PageIsEmpty() check was added by commit 5d9f146c over 20 years ago.
It looks like it has always been unnecessary.
When we invented arrays of composite types (commit bc8036fc6),
we excluded system catalogs, basically just on the grounds of not
wanting to bloat pg_type. However, it's definitely inconsistent that
catalogs' composite types can't be put into arrays when others can.
Another problem is that the exclusion is done by checking
IsUnderPostmaster in heap_create_with_catalog, which means that
(1) If a user tries to create a table in single-user mode, it doesn't
get an array type. That's bad in itself, plus it breaks pg_upgrade.
(2) If someone drops and recreates a system view or information_schema
view (as we occasionally recommend doing), it will now have an array
type where it did not before, making for still more inconsistency.
So this is all pretty messy. Let's just get rid of the inconsistency
and decree that system-created relations should have array types if
similar user-created ones would, i.e. it only depends on the relkind.
As of HEAD, that means that the initial contents of pg_type grow from
411 rows to 605, which is a lot of growth percentage-wise, but it's
still quite a small catalog compared to others.
Wenjing Zeng, reviewed by Shawn Wang, further hacking by me
Discussion: https://postgr.es/m/761F1389-C6A8-4C15-80CE-950C961F5341@gmail.com
This introduces a new set of extended routines for procedure and
operator name lookups, with a flag bitmask argument that can modify the
result. The following options are available:
- Force schema qualification, ignoring search_path. This is similar to
the existing option for format_{operator|procedure}_qualified().
- Force NULL as result instead of a numeric OID for an undefined
object. This option is new.
This is a refactoring similar to 1185c78, that will be used for a future
patch to improve the SQL functions providing information using object
addresses for undefined objects.
Author: Michael Paquier
Reviewed-by: Aleksander Alekseev, Dmitry Dolgov, Daniel Gustafsson,
Álvaro Herrera
Discussion: https://postgr.es/m/CAB7nPqSZxrSmdHK-rny7z8mi=EAFXJ5J-0RbzDw6aus=wB5azQ@mail.gmail.com
If a type scanned is undefined, type format routines have two behaviors
depending on if FORMAT_TYPE_ALLOW_INVALID is used by the caller or not:
- Issue a cache lookup error
- Return an undefined type name "???", "???[]" or "-"
The current interface is not really helpful for callers willing to
format properly a type name, but still make sure that the type is
defined as there could be types matching the strings generated when
looking for an undefined type, even if that should not be a problem in
practice. In order to counter that, add a new flag called
FORMAT_TYPE_INVALID_AS_NULL that returns a NULL result instead of "???
or "-" which does not generate an error. This flag will be used in a
follow-up patch improving the set of SQL functions showing information
for object addresses when it comes to undefined objects.
Author: Michael Paquier
Reviewed-by: Aleksander Alekseev, Dmitry Dolgov, Daniel Gustafsson,
Álvaro Herrera
Discussion: https://postgr.es/m/CAB7nPqSZxrSmdHK-rny7z8mi=EAFXJ5J-0RbzDw6aus=wB5azQ@mail.gmail.com
The cfbot and some BF animals are complaining about the previous
read_binary_file commit because of ignoring return value of ‘fread’.
So let's make everyone happy by testing the return value even though
not strictly needed.
Reported by Justin Pryzby, and suggested patch by Tom Lane. Backpatched
to v11 same as the previous commit.
Reported-By: Justin Pryzby
Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/flat/969b8d82-5bb2-5fa8-4eb1-f0e685c5d736%40joeconway.com
Backpatch-through: 11
read_binary_file(), used by SQL functions pg_read_file() and friends,
uses stat to determine file length to read, when not passed an explicit
length as an argument. This is problematic, for example, if the file
being read is a virtual file with a stat-reported length of zero.
Arrange to read until EOF, or StringInfo data string lenth limit, is
reached instead.
Original complaint and patch by me, with significant review, corrections,
advice, and code optimizations by Tom Lane. Backpatched to v11. Prior to
that only paths relative to the data and log dirs were allowed for files,
so no "zero length" files were reachable anyway.
Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/flat/969b8d82-5bb2-5fa8-4eb1-f0e685c5d736%40joeconway.com
Backpatch-through: 11
After running GetForeignRelSize for a foreign table, adjust rel->tuples
to be at least as large as rel->rows. This prevents bizarre behavior
in estimate_num_groups() and perhaps other places, especially in the
scenario where rel->tuples is zero because pg_class.reltuples is
(suggesting that ANALYZE has never been run for the table). As things
stood, we'd end up estimating one group out of any GROUP BY on such a
table, whereas the default group-count estimate is more likely to result
in a sane plan.
Also, clarify in the documentation that GetForeignRelSize has the option
to override the rel->tuples value if it has a better idea of what to use
than what is in pg_class.reltuples.
Per report from Jeff Janes. Back-patch to all supported branches.
Patch by me; thanks to Etsuro Fujita for review
Discussion: https://postgr.es/m/CAMkU=1xNo9cnan+Npxgz0eK7394xmjmKg-QEm8wYG9P5-CcaqQ@mail.gmail.com
Commit ecd9e9f0b fixed the problem in the wrong place, causing unwanted
side-effects on the behavior of GetNextTempTableSpace(). Instead,
let's make SharedFileSetInit() responsible for subbing in the value
of MyDatabaseTableSpace when the default tablespace is called for.
The convention about what is in the tempTableSpaces[] array is
evidently insufficiently documented, so try to improve that.
It also looks like SharedFileSetInit() is doing the wrong thing in the
case where temp_tablespaces is empty. It was hard-wiring use of the
pg_default tablespace, but it seems like using MyDatabaseTableSpace
is more consistent with what happens for other temp files.
Back-patch the reversion of PrepareTempTablespaces()'s behavior to
9.5, as ecd9e9f0b was. The changes in SharedFileSetInit() go back
to v11 where that was introduced. (Note there is net zero code change
before v11 from these two patch sets, so nothing to release-note.)
Magnus Hagander and Tom Lane
Discussion: https://postgr.es/m/CABUevExg5YEsOvqMxrjoNvb3ApVyH+9jggWGKwTDFyFCVWczGQ@mail.gmail.com
A likely copy/paste error in 98e8b48053 from back in 2004 would
cause temp tablespace to be reset to InvalidOid if temp_tablespaces
was set to the same value as the primary tablespace in the database.
This would cause shared filesets (such as for parallel hash joins)
to ignore them, putting the temporary files in the default tablespace
instead of the configured one. The bug is in the old code, but it
appears to have been exposed only once we had shared filesets.
Reviewed-By: Daniel Gustafsson
Discussion: https://postgr.es/m/CABUevExg5YEsOvqMxrjoNvb3ApVyH+9jggWGKwTDFyFCVWczGQ@mail.gmail.com
Backpatch-through: 9.5
Do the same for the maintenance_work_mem global variable.
Oversight in commit 848ae330a4, which increased the previous defaults
for work_mem and maintenance_work_mem by 4X.
Make some of the variable names in _bt_search() consistent with
corresponding variables within _bt_getstackbuf(). This naming scheme is
clearer because the variable names always express a relationship between
the currently locked buffer/page and some other page.
src/backend/replication/README includes since 32bc08b a basic
description of the WAL receiver hooks available in walreceiver.h for a
module like libpqwalreceiver, but the README has never been updated to
reflect changes done to the hooks, so the contents of the README have
rotten with the time. This commit moves the description from the README
to walreceiver.h, where it will be hard to miss that a description
update or addition is needed depending on the modifications done to the
hooks.
Each hook now includes a description of what it does in walreceiver.h,
and the replication's README mentions walreceiver.h.
Thanks also to Amit Kapila for the discussion.
Author: Michael Paquier
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/20200502024606.GA471944@paquier.xyz
This is a follow-up commit similar to 68de144, with more places in the
backend code simplified with the macros able to assign values to the
fields of ObjectAddress. The code paths changed here could be
transitioned later into using more grouping when inserting dependency
records, simplifying this future work.
Author: Daniel Gustafsson, Michael Paquier
Discussion: https://postgr.es/m/20190213182737.mxn6hkdxwrzgxk35@alap3.anarazel.de
Use separate functions to save and restore error context information as
that made code easier to understand. Also, make it clear that the index
information required for error context is sane.
Author: Andres Freund, Justin Pryzby, Amit Kapila
Backpatch-through: 13, where it was introduced
Discussion: https://postgr.es/m/CAA4eK1LWo+v1OWu=Sky27GTGSCuOmr7iaURNbc5xz6jO+SaPeA@mail.gmail.com
When creating an extension, the same type of dependency is used when
registering a dependency to a schema and required extensions. This
improves the code so as those dependencies are not recorded one-by-one,
but grouped together. Note that this has as side effect to remove
duplicate dependency entries, even if it should not happen in practice
as extensions listed as required in a control file should be listed only
once.
Extracted from a larger patch by the same author.
Author: Daniel Dustafsson
Discussion: https://postgr.es/m/20200629065535.GA183079@paquier.xyz
The "Disk Usage" and "HashAgg Batches" properties in the EXPLAIN ANALYZE
output for HashAgg were previously only shown if the number of batches
was greater than 0. Here we change this so that these properties are
always shown for EXPLAIN ANALYZE formats other than "text". The idea here
is that since the HashAgg could have spilled to disk if there had been
more data or groups to aggregate, then it's relevant that we're clear in
the EXPLAIN ANALYZE output when no spilling occurred in this particular
execution of the given plan.
For the "text" EXPLAIN format, we still hide these properties when no
spilling occurs. This EXPLAIN format is designed to be easy for humans
to read. To maintain the readability we have a higher threshold for which
properties we display for this format.
Discussion: https://postgr.es/m/CAApHDvo_dmNozQQTmN-2jGp1vT%3Ddxx7Q0vd%2BMvD1cGpv2HU%3DSg%40mail.gmail.com
Backpatch-through: 13, where the hashagg spilling code was added.
Thomas Munro
Michael Paquier
Tom Lane
Peter Eisentraut
David Rowley
Alvaro Herrera
Jeff Davis
Amit Kapila
Alexander Korotkov
Andres Freund
Fujii Masao
Magnus Hagander
Peter Geoghegan
Joe Conway