The transaction ID returned by GetNextXidAndEpoch() is in the future,
so we can't attempt to access its status or we might try to read a
CLOG page that doesn't exist. The > vs >= confusion probably stemmed
from the choice of a variable name containing the word "last" instead
of "next", so fix that too.
Back-patch to 10 where the function arrived.
Author: Thomas Munro
Discussion: https://postgr.es/m/CA%2BhUKG%2Buua_BV5cyfsioKVN2d61Lukg28ECsWTXKvh%3DBtN2DPA%40mail.gmail.com
Relations dropped in a single transaction are tracked in a list of
unowned relations. With large number of dropped relations this resulted
in poor performance at the end of a transaction, when the relations are
removed from the singly linked list one by one.
Commit b4166911 attempted to address this issue (particularly when it
happens during recovery) by removing the relations in a reverse order,
resulting in O(1) lookups in the list of unowned relations. This did
not work reliably, though, and it was possible to trigger the O(N^2)
behavior in various ways.
Instead of trying to remove the relations in a specific order with
respect to the linked list, which seems rather fragile, switch to a
regular doubly linked. That allows us to remove relations cheaply no
matter where in the list they are.
As b4166911 was a bugfix, backpatched to all supported versions, do the
same thing here.
Reviewed-by: Alvaro Herrera
Discussion: https://www.postgresql.org/message-id/flat/80c27103-99e4-1d0c-642c-d9f3b94aaa0a%402ndquadrant.com
Backpatch-through: 9.4
Previously the xid horizon was only computed during WAL replay. That
had two major problems:
1) It relied on knowing what the table pointed to looks like. That was
easy enough before the introducing of tableam (we knew it had to be
heap, although some trickery around logging the heap relfilenodes
was required). But to properly handle table AMs we need
per-database catalog access to look up the AM handler, which
recovery doesn't allow.
2) Not knowing the xid horizon also makes it hard to support logical
decoding on standbys. When on a catalog table, we need to be able
to conflict with slots that have an xid horizon that's too old. But
computing the horizon by visiting the heap only works once
consistency is reached, but we always need to be able to detect
conflicts.
There's also a secondary problem, in that the current method performs
redundant work on every standby. But that's counterbalanced by
potentially computing the value when not necessary (either because
there's no standby, or because there's no connected backends).
Solve 1) and 2) by moving computation of the xid horizon to the
primary and by involving tableam in the computation of the horizon.
To address the potentially increased overhead, increase the efficiency
of the xid horizon computation for heap by sorting the tids, and
eliminating redundant buffer accesses. When prefetching is available,
additionally perform prefetching of buffers. As this is more of a
maintenance task, rather than something routinely done in every read
only query, we add an arbitrary 10 to the effective concurrency -
thereby using IO concurrency, when not globally enabled. That's
possibly not the perfect formula, but seems good enough for now.
Bumps WAL format, as latestRemovedXid is now part of the records, and
the heap's relfilenode isn't anymore.
Author: Andres Freund, Amit Khandekar, Robert Haas
Reviewed-By: Robert Haas
Discussion:
https://postgr.es/m/20181212204154.nsxf3gzqv3gesl32@alap3.anarazel.dehttps://postgr.es/m/20181214014235.dal5ogljs3bmlq44@alap3.anarazel.dehttps://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
ALTER INDEX .. ATTACH PARTITION fails if the partitioned table where the
index is defined contains more dropped columns than its partition, with
this message:
ERROR: incorrect attribute map
The cause was that one caller of CompareIndexInfo was passing the number
of attributes of the partition rather than the parent, which confused
the length check. Repair.
This can cause pg_upgrade to fail when used on such a database. Leave
some more objects around after regression tests, so that the case is
detected by pg_upgrade test suite.
Remove some spurious empty lines noticed while looking for other cases
of the same problem.
Discussion: https://postgr.es/m/20190326213924.GA2322@alvherre.pgsql
Up to now, otherrel RelOptInfos were built at the same time as baserel
RelOptInfos, thanks to recursion in build_simple_rel(). However,
nothing in query_planner's preprocessing cares at all about otherrels,
only baserels, so we don't really need to build them until just before
we enter make_one_rel. This has two benefits:
* create_lateral_join_info did a lot of extra work to propagate
lateral-reference information from parents to the correct children.
But if we delay creation of the children till after that, it's
trivial (and much harder to break, too).
* Since we have all the restriction quals correctly assigned to
parent appendrels by this point, it'll be possible to do plan-time
pruning and never make child RelOptInfos at all for partitions that
can be pruned away. That's not done here, but will be later on.
Amit Langote, reviewed at various times by Dilip Kumar, Jesper Pedersen,
Yoshikazu Imai, and David Rowley
Discussion: https://postgr.es/m/9d7c5112-cb99-6a47-d3be-cf1ee6862a1d@lab.ntt.co.jp
Commit caf626b2c missed that the relevant reloptions entry needs
to be moved from the intRelOpts[] array to realRelOpts[].
Somewhat surprisingly, it seems to work anyway, perhaps because
the desired default and limit values are all integers. We ought
to have either a simpler data structure or better cross-checking
here, but that's for another patch.
Nikolay Shaplov
Discussion: https://postgr.es/m/4861742.12LTaSB3sv@x200m
We've been creating duplicate RTEs for partitioned tables just
because we do so for regular inheritance parent tables. But unlike
regular-inheritance parents which are themselves regular tables
and thus need to be scanned, partitioned tables don't need the
extra RTE.
This makes the conditions for building a child RTE the same as those
for building an AppendRelInfo, allowing minor simplification in
expand_single_inheritance_child. Since the planner's actual processing
is driven off the AppendRelInfo list, nothing much changes beyond that,
we just have one fewer useless RTE entry.
Amit Langote, reviewed and hacked a bit by me
Discussion: https://postgr.es/m/9d7c5112-cb99-6a47-d3be-cf1ee6862a1d@lab.ntt.co.jp
These instances were apparently trying to carry the const qualifier
from the arguments through the complex casts, but for that the const
qualifier was misplaced.
After 71bdc99d0d, "tableam: Add helper for indexes to check if a
corresponding table tuples exist." there's no in-core user left. As
there's unlikely to be an external user, and such an external user
could easily be adjusted to use table_index_fetch_tuple_check(),
remove heap_hot_search().
Per complaint from Peter Geoghegan
Author: Andres Freund
Discussion: https://postgr.es/m/CAH2-Wzn0Oq4ftJrTqRAsWy2WGjv0QrJcwoZ+yqWsF_Z5vjUBFw@mail.gmail.com
Since 7c079d7, partition bounds are able to use generalized expression
syntax when processed, treating "minvalue" and "maxvalue" as specific
cases as they get passed down for transformation as a column references.
The checks for infinite bounds in range expressions have been lax
though, causing crashes when trying to use column reference names with
more than one field. Here is an example causing a crash:
CREATE TABLE list_parted (a int) PARTITION BY LIST (a);
CREATE TABLE part_list_crash PARTITION OF list_parted
FOR VALUES IN (somename.somename);
Note that the creation of the second relation should fail as partition
bounds cannot have column references in their expressions, so when
finding an expression which does not match the expected infinite bounds,
then this commit lets the generic transformation machinery check after
it. The error message generated in this case references as well a
missing RTE, which is confusing. This problem will be treated
separately as it impacts as well default expressions for some time, and
for now only the cases where a crash can happen are fixed.
While on it, extend the set of regression tests in place for list
partition bounds and add an extra set for range partition bounds.
Reported-by: Alexander Lakhin
Author: Michael Paquier
Reviewed-by: Amit Langote
Discussion: https://postgr.es/m/15668-0377b1981aa1a393@postgresql.org
This primarily is to allow WHERE CURRENT OF to continue to work as it
currently does. It's not clear to me that these semantics make sense
for every AM, but it works for the in-core heap, and the out of core
zheap. We can refine it further at a later point if necessary.
Author: Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
We were getting just DEFAULT_INEQ_SEL for comparisons such as
"ctid >= constant", but it's possible to do a lot better if we don't
mind some assumptions about the table's tuple density being reasonably
uniform. There are already assumptions much like that elsewhere in
the planner, so that hardly seems like much of an objection.
Extracted from a patch set that also proposes to introduce a special
executor node type for such queries. Not sure if that's going to make
it into v12, but improving the selectivity estimate is useful
independently of that.
Edmund Horner, reviewed by David Rowley
Discussion: https://postgr.es/m/CAMyN-kB-nFTkF=VA_JPwFNo08S0d-Yk0F741S2B7LDmYAi8eyA@mail.gmail.com
If there's only one child relation, the Append or MergeAppend isn't
doing anything useful, and can be elided. It does have a purpose
during planning though, which is to serve as a buffer between parent
and child Var numbering. Therefore we keep it all the way through
to setrefs.c, and get rid of it only after fixing references in the
plan level(s) above it. This works largely the same as setrefs.c's
ancient hack to get rid of no-op SubqueryScan nodes, and can even
share some code with that.
Note the change to make setrefs.c use apply_tlist_labeling rather than
ad-hoc code. This has the effect of propagating the child's resjunk
and ressortgroupref labels, which formerly weren't propagated when
removing a SubqueryScan. Doing that is demonstrably necessary for
the [Merge]Append cases, and seems harmless for SubqueryScan, if only
because trivial_subqueryscan is afraid to collapse cases where the
resjunk marking differs. (I suspect that restriction could now be
removed, though it's unclear that it'd make any new matches possible,
since the outer query can't have references to a child resjunk column.)
David Rowley, reviewed by Alvaro Herrera and Tomas Vondra
Discussion: https://postgr.es/m/CAKJS1f_7u8ATyJ1JGTMHFoKDvZdeF-iEBhs+sM_SXowOr9cArg@mail.gmail.com
Add additional heuristics to the algorithm for locating an optimal split
location. New logic identifies localized monotonically increasing
values in indexes with multiple columns. When this insertion pattern is
detected, page splits split just after the new item that provoked a page
split (or apply leaf fillfactor in the style of a rightmost page split).
This optimization is a variation of the long established leaf fillfactor
optimization used during rightmost page splits.
50/50 page splits are only appropriate with a pattern of truly random
insertions, where the average space utilization ends up at 65% - 70%.
Without this patch, affected cases have leaf pages that are no more than
about 50% full on average. Future insertions can never make use of the
free space left behind. With this patch, affected cases have leaf pages
that are about 90% full on average (assuming a fillfactor of 90).
Localized monotonically increasing insertion patterns are presumed to be
fairly common in real-world applications. There is a fair amount of
anecdotal evidence for this. Both pg_depend system catalog indexes
(pg_depend_depender_index and pg_depend_reference_index) are at least
20% smaller after the regression tests are run when the optimization is
available. Furthermore, many of the indexes created by a fair use
implementation of TPC-C for Postgres are consistently about 40% smaller
when the optimization is available.
Note that even pg_upgrade'd v3 indexes make use of this optimization.
Author: Peter Geoghegan
Reviewed-By: Heikki Linnakangas
Discussion: https://postgr.es/m/CAH2-WzkpKeZJrXvR_p7VSY1b-s85E3gHyTbZQzR0BkJ5LrWF_A@mail.gmail.com
This uses the same progress reporting infrastructure added in commit
c16dc1aca5 and extends it to these
additional cases. We lack the ability to track the internal progress
of sorts and index builds so the information reported is
coarse-grained for some parts of the operation, but it still seems
like a significant improvement over having nothing at all.
Tatsuro Yamada, reviewed by Thomas Munro, Masahiko Sawada, Michael
Paquier, Jeff Janes, Alvaro Herrera, Rafia Sabih, and by me. A fair
amount of polishing also by me.
Discussion: http://postgr.es/m/59A77072.3090401@lab.ntt.co.jp
Non-backtracking flex parsers work faster than backtracking ones. So, this
commit gets rid of backtracking in jsonpath_scan.l. That required explicit
handling of some cases as well as manual backtracking for some cases. More
regression tests for numerics are added.
Discussion: https://mail.google.com/mail/u/0?ik=a20b091faa&view=om&permmsgid=msg-f%3A1628425344167939063
Author: John Naylor, Nikita Gluknov, Alexander Korotkov
This commit include formatting improvements, renamings and comments. Also,
it makes jsonpath_scan.l be more uniform with other our lexers. Firstly,
states names are renamed to more short alternatives. Secondly, <INITIAL>
prefix removed from the rules. Corresponding rules are moved to the tail, so
they would anyway work only in initial state.
Author: Alexander Korotkov
Reviewed-by: John Naylor
Coverity complained that simple8b_encode() might read beyond the end of
the 'diffs' array, in the loop to encode the integers. That was a false
positive, because we never get into the loop in modes 0 or 1, and the
array is large enough for all the other modes. But I admit it's very
subtle, so it's not surprising that Coverity didn't see it, and it's not
very obvious to humans either. Refactor it, so that the second loop
re-computes the differences, instead of carrying them over from the first
loop in the 'diffs' array. This way, the 'diffs' array is not needed
anymore. It makes no measurable difference in performance, and seems more
straightforward this way.
Also, improve the comments in simple8b_encode(): fix the comment about its
return value that was flat-out wrong, and explain the condition when it
returns EMPTY_CODEWORD better.
In the passing, move the 'selector' from the codeword's low bits to the
high bits. It doesn't matter much, but looking at the original paper, and
googling around for other Simple-8b implementations, that's how it's
usually done.
Per Coverity, and Tom Lane's report off-list.
This is essentially the tableam version of heapam_fetch(),
i.e. fetching a tuple identified by a tid, performing visibility
checks.
Note that this different from table_index_fetch_tuple(), which is for
index lookups. It therefore has to handle a tid pointing to an earlier
version of a tuple if the AM uses an optimization like heap's HOT. Add
comments to that end.
This commit removes the stats_relation argument from heap_fetch, as
it's been unused for a long time.
Author: Andres Freund
Reviewed-By: Haribabu Kommi
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
Previously those directly performed a heap_insert(). Use
table_insert() instead. The input slot of those routines is not of
the target relation - we could fix that by copying if necessary, but
that'd not be beneficial for performance. As those codepaths don't
access any AM specific tuple fields (say xmin/xmax), there's no need
to use an AM specific slot.
Author: Andres Freund
Reviewed-By: Haribabu Kommi
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
Commit 8aa9dd74b didn't quite finish the job in this area after all,
because DROP ROLE has a code path distinct from DROP OWNED BY, and
it was still reporting dependent objects in whatever order the index
scan returned them in.
Buildfarm experience shows that index ordering of equal-keyed objects is
significantly less stable than before in the wake of using heap TIDs as
tie-breakers. So if we try to hide the unstable ordering by suppressing
DETAIL reports, we're just going to end up having to do that for every
DROP that reports multiple objects. That's not great from a coverage
or problem-detection standpoint, and it's something we'll inevitably
forget in future patches, leading to more iterations of fixing-an-
unstable-result. So let's just bite the bullet and sort here too.
Discussion: https://postgr.es/m/E1h6eep-0001Mw-Vd@gemulon.postgresql.org
It doesn't make sense to consider the possibility that there will only
be one candidate split point when choosing among split points to find
the split with the lowest penalty. This is a vestige of an earlier
version of the patch that became commit fab25024.
Issue spotted while rereviewing coverage of the nbtree patch series
using gcov.
Since its introduction in 19dc233c, current_logfiles has been assigned
the same permissions as a log file, which can be enforced with
log_file_mode. This setup can lead to incompatibility problems with
group access permissions as current_logfiles is not located in the log
directory, but at the root of the data folder. Hence, if group
permissions are used but log_file_mode is more restrictive, a backup
with a user in the group having read access could fail even if the log
directory is located outside of the data folder.
Per discussion with the folks mentioned below, we have concluded that
current_logfiles should not be treated as a log file as it only stores
metadata related to log files, and that it should use the same
permissions as all other files in the data directory. This solution has
the merit to be simple and fixes all the interaction problems between
group access and log_file_mode.
Author: Haribabu Kommi
Reviewed-by: Stephen Frost, Robert Haas, Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/CAJrrPGcEotF1P7AWoeQyD3Pqr-0xkQg_Herv98DjbaMj+naozw@mail.gmail.com
Backpatch-through: 11, where group access has been added.
Add command variants COMMIT AND CHAIN and ROLLBACK AND CHAIN, which
start new transactions with the same transaction characteristics as the
just finished one, per SQL standard.
Support for transaction chaining in PL/pgSQL is also added. This
functionality is especially useful when running COMMIT in a loop in
PL/pgSQL.
Reviewed-by: Fabien COELHO <coelho@cri.ensmp.fr>
Discussion: https://www.postgresql.org/message-id/flat/28536681-324b-10dc-ade8-ab46f7645a5a@2ndquadrant.com
This adds new, required, table AM callbacks for insert/delete/update
and lock_tuple. To be able to reasonably use those, the EvalPlanQual
mechanism had to be adapted, moving more logic into the AM.
Previously both delete/update/lock call-sites and the EPQ mechanism had
to have awareness of the specific tuple format to be able to fetch the
latest version of a tuple. Obviously that needs to be abstracted
away. To do so, move the logic that find the latest row version into
the AM. lock_tuple has a new flag argument,
TUPLE_LOCK_FLAG_FIND_LAST_VERSION, that forces it to lock the last
version, rather than the current one. It'd have been possible to do
so via a separate callback as well, but finding the last version
usually also necessitates locking the newest version, making it
sensible to combine the two. This replaces the previous use of
EvalPlanQualFetch(). Additionally HeapTupleUpdated, which previously
signaled either a concurrent update or delete, is now split into two,
to avoid callers needing AM specific knowledge to differentiate.
The move of finding the latest row version into tuple_lock means that
encountering a row concurrently moved into another partition will now
raise an error about "tuple to be locked" rather than "tuple to be
updated/deleted" - which is accurate, as that always happens when
locking rows. While possible slightly less helpful for users, it seems
like an acceptable trade-off.
As part of this commit HTSU_Result has been renamed to TM_Result, and
its members been expanded to differentiated between updating and
deleting. HeapUpdateFailureData has been renamed to TM_FailureData.
The interface to speculative insertion is changed so nodeModifyTable.c
does not have to set the speculative token itself anymore. Instead
there's a version of tuple_insert, tuple_insert_speculative, that
performs the speculative insertion (without requiring a flag to signal
that fact), and the speculative insertion is either made permanent
with table_complete_speculative(succeeded = true) or aborted with
succeeded = false).
Note that multi_insert is not yet routed through tableam, nor is
COPY. Changing multi_insert requires changes to copy.c that are large
enough to better be done separately.
Similarly, although simpler, CREATE TABLE AS and CREATE MATERIALIZED
VIEW are also only going to be adjusted in a later commit.
Author: Andres Freund and Haribabu Kommi
Discussion:
https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.dehttps://postgr.es/m/20190313003903.nwvrxi7rw3ywhdel@alap3.anarazel.dehttps://postgr.es/m/20160812231527.GA690404@alvherre.pgsql
Previously we were using the SQL:2003 definition, which doesn't allow
this, but that creates a serious dump/restore gotcha: there is no
setting of xmloption that will allow all valid XML data. Hence,
switch to the 2006 definition.
Since libxml doesn't accept <!DOCTYPE> directives in the mode we
use for CONTENT parsing, the implementation is to detect <!DOCTYPE>
in the input and switch to DOCUMENT parsing mode. This should not
cost much, because <!DOCTYPE> should be close to the front of the
input if it's there at all. It's possible that this causes the
error messages for malformed input to be slightly different than
they were before, if said input includes <!DOCTYPE>; but that does
not seem like a big problem.
In passing, buy back a few cycles in parsing of large XML documents
by not doing strlen() of the whole input in parse_xml_decl().
Back-patch because dump/restore failures are not nice. This change
shouldn't break any cases that worked before, so it seems safe to
back-patch.
Chapman Flack (revised a bit by me)
Discussion: https://postgr.es/m/CAN-V+g-6JqUQEQZ55Q3toXEN6d5Ez5uvzL4VR+8KtvJKj31taw@mail.gmail.com
Teach nbtree forward index scans to check the high key before moving to
the right sibling page in the hope of finding that it isn't actually
necessary to do so. The new check may indicate that the scan definitely
cannot find matching tuples to the right, ending the scan immediately.
We already opportunistically force a similar "continuescan orientated"
key check of the final non-pivot tuple when it's clear that it cannot be
returned to the scan due to being dead-to-all. The new high key check
is complementary.
The new approach for forward scans is more effective than checking the
final non-pivot tuple, especially with composite indexes and non-unique
indexes. The improvements to the logic for picking a split point added
by commit fab25024 make it likely that relatively dissimilar high keys
will appear on a page. A distinguishing key value that can only appear
on non-pivot tuples on the right sibling page will often be present in
leaf page high keys.
Since forcing the final item to be key checked no longer makes any
difference in the case of forward scans, the existing extra key check is
now only used for backwards scans. Backward scans continue to
opportunistically check the final non-pivot tuple, which is actually the
first non-pivot tuple on the page (not the last).
Note that even pg_upgrade'd v3 indexes make use of this optimization.
Author: Peter Geoghegan, Heikki Linnakangas
Reviewed-By: Heikki Linnakangas
Discussion: https://postgr.es/m/CAH2-WzkOmUduME31QnuTFpimejuQoiZ-HOf0pOWeFZNhTMctvA@mail.gmail.com
Postpone most of the effort of constructing PartitionedRelPruneInfos
until after we have found out whether run-time pruning is needed at all.
This costs very little duplicated effort (basically just an extra
find_base_rel() call per partition) and saves quite a bit when we
can't do run-time pruning.
Also, merge the first loop (for building relid_subpart_map) into
the second loop, since we don't need the map to be valid during
that loop.
Amit Langote
Discussion: https://postgr.es/m/9d7c5112-cb99-6a47-d3be-cf1ee6862a1d@lab.ntt.co.jp
I (tgl) remain dubious that it's a good idea for PartitionDirectory
to hold a pin on a relcache entry throughout planning, rather than
copying the data or using some kind of refcount scheme. However, it's
certainly the responsibility of the PartitionDirectory code to ensure
that what it's handing back is a stable data structure, not that of
its caller. So this is a pretty clear oversight in commit 898e5e329,
and one that can cost a lot of performance when there are many
partitions.
Amit Langote (extracted from a much larger patch set)
Discussion: https://postgr.es/m/CA+TgmoY3bRmGB6-DUnoVy5fJoreiBJ43rwMrQRCdPXuKt4Ykaw@mail.gmail.com
Discussion: https://postgr.es/m/9d7c5112-cb99-6a47-d3be-cf1ee6862a1d@lab.ntt.co.jp
There were more large constants that needed UINT64CONST. And one variable
was declared as "int", when it needed to be uint64. These bugs were only
visible on 32-bit systems; clearly I should've tested on one, given that
this code does a lot of work with 64-bit integers.
Also, in the test "huge distances" test, the code created some values with
random distances between them, but the test logic didn't take into account
the possibility that the random distance was exactly 1. That never actually
happens with the seed we're using, but let's be tidy.
To do this, we scan GiST two times. In the first pass we make note of
empty leaf pages and internal pages. At second pass we scan through
internal pages, looking for downlinks to the empty pages.
Deleting internal pages is still not supported, like in nbtree, the last
child of an internal page is never deleted. That means that if you have a
workload where new keys are always inserted to different area than where
old keys are removed, the index will still grow without bound. But the rate
of growth will be an order of magnitude slower than before.
Author: Andrey Borodin
Discussion: https://www.postgresql.org/message-id/B1E4DF12-6CD3-4706-BDBD-BF3283328F60@yandex-team.ru
The set is implemented as a B-tree, with a compact representation at leaf
items, using Simple-8b algorithm, so that clusters of nearby values use
less memory.
The IntegerSet isn't used for anything yet, aside from the test code, but
we have two patches in the works that would benefit from this: A patch to
allow GiST vacuum to delete empty pages, and a patch to reduce heap
VACUUM's memory usage, by storing the list of dead TIDs more efficiently
and lifting the 1 GB limit on its size.
This includes a unit test module, in src/test/modules/test_integerset.
It can be used to verify correctness, as a regression test, but if you run
it manully, it can also print memory usage and execution time of some of
the tests.
Author: Heikki Linnakangas, Andrey Borodin
Reviewed-by: Julien Rouhaud
Discussion: https://www.postgresql.org/message-id/b5e82599-1966-5783-733c-1a947ddb729f@iki.fi
This adds a flag "deterministic" to collations. If that is false,
such a collation disables various optimizations that assume that
strings are equal only if they are byte-wise equal. That then allows
use cases such as case-insensitive or accent-insensitive comparisons
or handling of strings with different Unicode normal forms.
This functionality is only supported with the ICU provider. At least
glibc doesn't appear to have any locales that work in a
nondeterministic way, so it's not worth supporting this for the libc
provider.
The term "deterministic comparison" in this context is from Unicode
Technical Standard #10
(https://unicode.org/reports/tr10/#Deterministic_Comparison).
This patch makes changes in three areas:
- CREATE COLLATION DDL changes and system catalog changes to support
this new flag.
- Many executor nodes and auxiliary code are extended to track
collations. Previously, this code would just throw away collation
information, because the eventually-called user-defined functions
didn't use it since they only cared about equality, which didn't
need collation information.
- String data type functions that do equality comparisons and hashing
are changed to take the (non-)deterministic flag into account. For
comparison, this just means skipping various shortcuts and tie
breakers that use byte-wise comparison. For hashing, we first need
to convert the input string to a canonical "sort key" using the ICU
analogue of strxfrm().
Reviewed-by: Daniel Verite <daniel@manitou-mail.org>
Reviewed-by: Peter Geoghegan <pg@bowt.ie>
Discussion: https://www.postgresql.org/message-id/flat/1ccc668f-4cbc-0bef-af67-450b47cdfee7@2ndquadrant.com
Trying to call the function with the top-most parent of a partition tree
was leading to a crash. In this case the correct result is to return
the top-most parent itself.
Reported-by: Álvaro Herrera
Author: Michael Paquier
Reviewed-by: Amit Langote
Discussion: https://postgr.es/m/20190322032612.GA323@alvherre.pgsql
When DefineIndex recurses to create constraints on partitions, it needs
to use the value returned by index_constraint_create to set up partition
dependencies. However, in the course of fixing the DEPENDENCY_INTERNAL_AUTO
mess, commit 1d92a0c9f7 introduced some code to that function that
clobbered the return value, causing the recorded OID to be of the wrong
object. Close examination of pg_depend after creating the tables leads
to indescribable objects :-( My sin (in commit bdc3d7fa23, while
preparing for DDL deparsing in event triggers) was to use a variable
name for the return value that's typically used for throwaway objects in
dependency-setting calls ("referenced"). Fix by changing the variable
names to match extended practice (the return value is "myself" rather
than "referenced".)
The pg_upgrade test notices the problem (in an indirect way: the pg_dump
outputs are in different order), but only if you create the objects in a
specific way that wasn't being used in the existing tests. Add a stanza
to leave some objects around that shows the bug.
Catversion bump because preexisting databases might have bogus pg_depend
entries.
Discussion: https://postgr.es/m/20190318204235.GA30360@alvherre.pgsql
These commands allow the argument type list to be omitted if there is
just one object that matches by name. However, if that syntax was
used with DROP IF EXISTS and there was more than one match, you got
a "function ... does not exist, skipping" notice message rather than a
truthful complaint about the ambiguity. This was basically due to
poor factorization and a rats-nest of logic, so refactor the relevant
lookup code to make it cleaner.
Note that this amounts to narrowing the scope of which sorts of
error conditions IF EXISTS will bypass. Per discussion, we only
intend it to skip no-such-object cases, not multiple-possible-matches
cases.
Per bug #15572 from Ash Marath. Although this definitely seems like
a bug, it's not clear that people would thank us for changing the
behavior in minor releases, so no back-patch.
David Rowley, reviewed by Julien Rouhaud and Pavel Stehule
Discussion: https://postgr.es/m/15572-ed1b9ed09503de8a@postgresql.org
LDAP servers can be advertised on a network with RFC 2782 DNS SRV
records. The OpenLDAP command-line tools automatically try to find
servers that way, if no server name is provided by the user. Teach
PostgreSQL to do the same using OpenLDAP's support functions, when
building with OpenLDAP.
For now, we assume that HAVE_LDAP_INITIALIZE (an OpenLDAP extension
available since OpenLDAP 2.0 and also present in Apple LDAP) implies
that you also have ldap_domain2hostlist() (which arrived in the same
OpenLDAP version and is also present in Apple LDAP).
Author: Thomas Munro
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/CAEepm=2hAnSfhdsd6vXsM6VZVN0br-FbAZ-O+Swk18S5HkCP=A@mail.gmail.com
This finishes a task we left undone in commit f1ad067fc, by extending
the delete-in-descending-OID-order rule to deletions triggered by
DROP OWNED BY. We've coped with machine-dependent deletion orders
one time too many, and the new issues caused by Peter G's recent
nbtree hacking seem like the last straw.
Discussion: https://postgr.es/m/E1h6eep-0001Mw-Vd@gemulon.postgresql.org
Thomas Munro
Michael Paquier
Tomas Vondra
Andres Freund
Alvaro Herrera
Tom Lane
Peter Eisentraut
Peter Geoghegan
Robert Haas
Alexander Korotkov
Heikki Linnakangas