If a Gather node has read as many tuples as it needs (for example, due
to Limit) it may detach the queue connecting it to the worker before
reading all of the worker's tuples. Rather than let the worker
continue to generate and send all of the results, have it stop after
sending the next tuple.
More could be done here to stop the worker even quicker, but this is
about as well as we can hope to do for 9.6.
This is in response to a problem report from Andreas Seltenreich.
Commit 44339b892a should be actually be
sufficient to fix that example even without this change, but it seems
better to do this, too, since we might otherwise waste quite a large
amount of effort in one or more workers.
Discussion: CAA4eK1KOKGqmz9bGu+Z42qhRwMbm4R5rfnqsLCNqFs9j14jzEA@mail.gmail.com
Amit Kapila
Fix still another bug in commit 35fcb1b3d: it failed to fully initialize
the SortSupport states it introduced to allow the executor to re-check
ORDER BY expressions containing distance operators. That led to a null
pointer dereference if the sortsupport code tried to use ssup_cxt. The
problem only manifests in narrow cases, explaining the lack of previous
field reports. It requires a GiST-indexable distance operator that lacks
SortSupport and is on a pass-by-ref data type, which among core+contrib
seems to be only btree_gist's interval opclass; and it requires the scan
to be done as an IndexScan not an IndexOnlyScan, which explains how
btree_gist's regression test didn't catch it. Per bug #14134 from
Jihyun Yu.
Peter Geoghegan
Report: <20160511154904.2603.43889@wrigleys.postgresql.org>
Further thought about bug #14174 motivated me to try the case of a
R/W datum being returned from a VALUES list, and sure enough it was
broken. Fix that.
Also add a regression test case exercising the same scenario for
FunctionScan. That's not broken right now, because the function's
result will get shoved into a tuplestore between generation and use;
but it could easily become broken whenever we get around to optimizing
FunctionScan better.
There don't seem to be any other places where we put the result of
expression evaluation into a virtual tuple slot that could then be
the source for Vars of further expression evaluation, so I think
this is the end of this bug.
If a plan node output expression returns an "expanded" datum, and that
output column is referenced in more than one place in upper-level plan
nodes, we need to ensure that what is returned is a read-only reference
not a read/write reference. Otherwise one of the referencing sites could
scribble on or even delete the expanded datum before we have evaluated the
others. Commit 1dc5ebc907, which introduced this feature, supposed
that it'd be sufficient to make SubqueryScan nodes force their output
columns to read-only state. The folly of that was revealed by bug #14174
from Andrew Gierth, and really should have been immediately obvious
considering that the planner will happily optimize SubqueryScan nodes
out of the plan without any regard for this issue.
The safest fix seems to be to make ExecProject() force its results into
read-only state; that will cover every case where a plan node returns
expression results. Actually we can delegate this to ExecTargetList()
since we can recursively assume that plain Vars will not reference
read-write datums. That should keep the extra overhead down to something
minimal. We no longer need ExecMakeSlotContentsReadOnly(), which was
introduced only in support of the idea that just a few plan node types
would need to do this.
In the future it would be nice to have the planner account for this problem
and inject force-to-read-only expression evaluation nodes into only the
places where there's a risk of multiple evaluation. That's not a suitable
solution for 9.5 or even 9.6 at this point, though.
Report: <20160603124628.9932.41279@wrigleys.postgresql.org>
do_text_output_multiline() would fail (typically with a null pointer
dereference crash) if its input string did not end with a newline. Such
cases do not arise in our current sources; but it certainly could happen
in future, or in extension code's usage of the function, so we should fix
it. To fix, replace "eol += len" with "eol = text + len".
While at it, make two cosmetic improvements: mark the input string const,
and rename the argument from "text" to "txt" to dodge pgindent strangeness
(since "text" is a typedef name).
Even though this problem is only latent at present, it seems like a good
idea to back-patch the fix, since it's a very simple/safe patch and it's
not out of the realm of possibility that we might in future back-patch
something that expects sane behavior from do_text_output_multiline().
Per report from Hao Lee.
Report: <CAGoxFiFPAGyPAJLcFxTB5cGhTW2yOVBDYeqDugYwV4dEd1L_Ag@mail.gmail.com>
That way, if the result overflows size_t, you'll get an error instead
of undefined behavior, which seems like a plus. This also has the
effect of casting the number of workers from int to Size, which is
better because it's harder to overflow int than size_t.
Dilip Kumar reported this issue and provided a patch upon which this
patch is based, but his version did use mul_size.
These adjustments adjust code and comments in minor ways to prevent
pgindent from mangling them. Among other things, I tried to avoid
situations where pgindent would emit "a +b" instead of "a + b", and I
tried to avoid having it break up inline comments across multiple
lines.
In nodeFuncs.c, pgindent wants to introduce spurious indentation into
the definitions of planstate_tree_walker and planstate_walk_subplans.
Fix that by spreading the definition out across several lines, similar
to what is already done for other walker functions in that file.
In execParallel.c, in the definition of SharedExecutorInstrumentation,
pgindent wants to insert more whitespace between the type name and the
member name. That causes it to mangle comments later on the line. Fix
by moving the comments out of line. Now that we have a bit more room,
add some more details that may be useful to the next person reading
this code.
The reverted changes were intended to force a choice of whether any
newly-added BufferGetPage() calls needed to be accompanied by a
test of the snapshot age, to support the "snapshot too old"
feature. Such an accompanying test is needed in about 7% of the
cases, where the page is being used as part of a scan rather than
positioning for other purposes (such as DML or vacuuming). The
additional effort required for back-patching, and the doubt whether
the intended benefit would really be there, have indicated it is
best just to rely on developers to do the right thing based on
comments and existing usage, as we do with many other conventions.
This change should have little or no effect on generated executable
code.
Motivated by the back-patching pain of Tom Lane and Robert Haas
The previous display was sort of confusing, because it didn't
distinguish between the number of workers that we planned to launch
and the number that actually got launched. This has already confused
several people, so display both numbers and label them clearly.
Julien Rouhaud, reviewed by me.
When IF NOT EXISTS was added to CREATE TABLE AS, this logic didn't get
the memo, possibly resulting in an Assert failure. It looks like there
would have been no ill effects in a non-Assert build, though. Back-patch
to 9.5 where the IF NOT EXISTS option was added.
Stas Kelvich
This patch is a no-op patch which is intended to reduce the chances
of failures of omission once the functional part of the "snapshot
too old" patch goes in. It adds parameters for snapshot, relation,
and an enum to specify whether the snapshot age check needs to be
done for the page at this point. This initial patch passes NULL
for the first two new parameters and BGP_NO_SNAPSHOT_TEST for the
third. The follow-on patch will change the places where the test
needs to be made.
Now indexes (but only B-tree for now) can contain "extra" column(s) which
doesn't participate in index structure, they are just stored in leaf
tuples. It allows to use index only scan by using single index instead
of two or more indexes.
Author: Anastasia Lubennikova with minor editorializing by me
Reviewers: David Rowley, Peter Geoghegan, Jeff Janes
resulttypeLen and resulttypeByVal must be set correctly when serializing
aggregates, not just when finalizing them. This was in David's final
patch but I downloaded the wrong version by mistake and failed to spot
the error.
David Rowley
This is necessary infrastructure for supporting parallel aggregation
for aggregates whose transition type is "internal". Such values
can't be passed between cooperating processes, because they are
just pointers.
David Rowley, reviewed by Tomas Vondra and by me.
In commit afb9249d06, we (probably I) made ExecLockRows assign
null test tuples to all relations of the query while setting up to do an
EvalPlanQual recheck for a newly-updated locked row. This was sheerest
brain fade: we should only set test tuples for relations that are lockable
by the LockRows node, and in particular empty test tuples are only sensible
for inheritance child relations that weren't the source of the current
tuple from their inheritance tree. Setting a null test tuple for an
unrelated table causes it to return NULLs when it should not, as exhibited
in bug #14034 from Bronislav Houdek. To add insult to injury, doing it the
wrong way required two loops where one would suffice; so the corrected code
is even a bit shorter and faster.
Add a regression test case based on his example, and back-patch to 9.5
where the bug was introduced.
Parallel workers can now partially aggregate the data and pass the
transition values back to the leader, which can combine the partial
results to produce the final answer.
David Rowley, based on earlier work by Haribabu Kommi. Reviewed by
Álvaro Herrera, Tomas Vondra, Amit Kapila, James Sewell, and me.
postgres_fdw can now sent an UPDATE or DELETE statement directly to
the foreign server in simple cases, rather than sending a SELECT FOR
UPDATE statement and then updating or deleting rows one-by-one.
Etsuro Fujita, reviewed by Rushabh Lathia, Shigeru Hanada, Kyotaro
Horiguchi, Albe Laurenz, Thom Brown, and me.
INSERT ... ON CONFLICT's precheck may have to wait on the outcome of
another insertion, which may or may not itself be a speculative
insertion. This wait is not necessarily associated with an exclusion
constraint, but was always reported that way in log messages if the wait
happened to involve a tuple that had no speculative token.
Initially discovered through use of ON CONFLICT DO NOTHING, where
spurious references to exclusion constraints in log messages were more
likely.
Patch by Peter Geoghegan.
Reviewed by Julien Rouhaud.
Back-patch to 9.5 where INSERT ... ON CONFLICT was added.
Commit 23a27b039d widened the rows-stored counters to uint64, but
that's academic unless we allow the tuple pointer array to exceed 1GB.
(It might be a good idea to provide some other limit on how much storage
a SPITupleTable can eat. On the other hand, there are plenty of other
ways to drive a backend into swap hell.)
Dagfinn Ilmari Mannsåker
This patch widens SPI_processed, EState's es_processed field, PortalData's
portalPos field, FuncCallContext's call_cntr and max_calls fields,
ExecutorRun's count argument, PortalRunFetch's result, and the max number
of rows in a SPITupleTable to uint64, and deals with (I hope) all the
ensuing fallout. Some of these values were declared uint32 before, and
others "long".
I also removed PortalData's posOverflow field, since that logic seems
pretty useless given that portalPos is now always 64 bits.
The user-visible results are that command tags for SELECT etc will
correctly report tuple counts larger than 4G, as will plpgsql's GET
GET DIAGNOSTICS ... ROW_COUNT command. Queries processing more tuples
than that are still not exactly the norm, but they're becoming more
common.
Most values associated with FETCH/MOVE distances, such as PortalRun's count
argument and the count argument of most SPI functions that have one, remain
declared as "long". It's not clear whether it would be worth promoting
those to int64; but it would definitely be a large dollop of additional
API churn on top of this, and it would only help 32-bit platforms which
seem relatively less likely to see any benefit.
Andreas Scherbaum, reviewed by Christian Ullrich, additional hacking by me
I've been saying we needed to do this for more than five years, and here it
finally is. This patch removes the ever-growing tangle of spaghetti logic
that grouping_planner() used to use to try to identify the best plan for
post-scan/join query steps. Now, there is (nearly) independent
consideration of each execution step, and entirely separate construction of
Paths to represent each of the possible ways to do that step. We choose
the best Path or set of Paths using the same add_path() logic that's been
used inside query_planner() for years.
In addition, this patch removes the old restriction that subquery_planner()
could return only a single Plan. It now returns a RelOptInfo containing a
set of Paths, just as query_planner() does, and the parent query level can
use each of those Paths as the basis of a SubqueryScanPath at its level.
This allows finding some optimizations that we missed before, wherein a
subquery was capable of returning presorted data and thereby avoiding a
sort in the parent level, making the overall cost cheaper even though
delivering sorted output was not the cheapest plan for the subquery in
isolation. (A couple of regression test outputs change in consequence of
that. However, there is very little change in visible planner behavior
overall, because the point of this patch is not to get immediate planning
benefits but to create the infrastructure for future improvements.)
There is a great deal left to do here. This patch unblocks a lot of
planner work that was basically impractical in the old code structure,
such as allowing FDWs to implement remote aggregation, or rewriting
plan_set_operations() to allow consideration of multiple implementation
orders for set operations. (The latter will likely require a full
rewrite of plan_set_operations(); what I've done here is only to fix it
to return Paths not Plans.) I have also left unfinished some localized
refactoring in createplan.c and planner.c, because it was not necessary
to get this patch to a working state.
Thanks to Robert Haas, David Rowley, and Amit Kapila for review.
Originally, we didn't have nworkers_launched, so code that used parallel
contexts had to be preprared for the possibility that not all of the
workers requested actually got launched. But now we can count on knowing
the number of workers that were successfully launched, which can shave
off a few cycles and simplify some code slightly.
Amit Kapila, reviewed by Haribabu Kommi, per a suggestion from Peter
Geoghegan.
The new bit indicates whether every tuple on the page is already frozen.
It is cleared only when the all-visible bit is cleared, and it can be
set only when we vacuum a page and find that every tuple on that page is
both visible to every transaction and in no need of any future
vacuuming.
A future commit will use this new bit to optimize away full-table scans
that would otherwise be triggered by XID wraparound considerations. A
page which is merely all-visible must still be scanned in that case, but
a page which is all-frozen need not be. This commit does not attempt
that optimization, although that optimization is the goal here. It
seems better to get the basic infrastructure in place first.
Per discussion, it's very desirable for pg_upgrade to automatically
migrate existing VM forks from the old format to the new format. That,
too, will be handled in a follow-on patch.
Masahiko Sawada, reviewed by Kyotaro Horiguchi, Fujii Masao, Amit
Kapila, Simon Riggs, Andres Freund, and others, and substantially
revised by me.
When processing ordered aggregates following a sort that could make use
of the abbreviated key optimization, only call the equality operator to
compare successive pairs of tuples when their abbreviated keys were not
equal.
Peter Geoghegan, reviewd by Andreas Karlsson and by me.
Commit 45f6240a8f added an assumption in ExecHashIncreaseNumBatches
and ExecHashIncreaseNumBuckets that they could find all tuples in the main
hash table by iterating over the "dense storage" introduced by that patch.
However, ExecHashRemoveNextSkewBucket continued its old practice of simply
re-linking deleted skew tuples into the main table's hashchains. Hence,
such tuples got lost during any subsequent increase in nbatch or nbuckets,
and would never get joined, as reported in bug #13908 from Seth P.
I (tgl) think that the aforesaid commit has got multiple design issues
and should be reworked rather completely; but there is no time for that
right now, so band-aid the problem by making ExecHashRemoveNextSkewBucket
physically copy deleted skew tuples into the "dense storage" arena.
The added test case is able to exhibit the problem by means of fooling the
planner with a WHERE condition that it will underestimate the selectivity
of, causing the initial nbatch estimate to be too small.
Tomas Vondra and Tom Lane. Thanks to David Johnston for initial
investigation into the bug report.
Commit 30d7ae3c76 introduced an HJDEBUG
stanza that probably didn't compile at the time, and definitely doesn't
compile now, because it refers to a nonexistent variable. It doesn't seem
terribly useful anyway, so just get rid of it.
While I'm fooling with it, use %z modifier instead of the obsolete hack of
casting size_t to unsigned long, and include the HashJoinTable's address in
each printout so that it's possible to distinguish the activities of
multiple hashjoins occurring in one query.
Noted while trying to use HJDEBUG to investigate bug #13908. Back-patch
to 9.5, because code that doesn't compile is certainly not very helpful.
This patch doesn't put the new infrastructure to use anywhere, and
indeed it's not clear how it could ever be used for something like
postgres_fdw which has to send an SQL query and wait for a reply,
but there might be FDWs or custom scan providers that are CPU-bound,
so let's give them a way to join club parallel.
KaiGai Kohei, reviewed by me.
Previously, the foreign join pushdown infrastructure left the question
of security entirely up to individual FDWs, but it would be easy for
a foreign data wrapper to inadvertently open up subtle security holes
that way. So, make it the core code's job to determine which user
mapping OID is relevant, and don't attempt join pushdown unless it's
the same for all relevant relations.
Per a suggestion from Tom Lane. Shigeru Hanada and Ashutosh Bapat,
reviewed by Etsuro Fujita and KaiGai Kohei, with some further
changes by me.
The core innovation of this patch is the introduction of the concept
of a partial path; that is, a path which if executed in parallel will
generate a subset of the output rows in each process. Gathering a
partial path produces an ordinary (complete) path. This allows us to
generate paths for parallel joins by joining a partial path for one
side (which at the baserel level is currently always a Partial Seq
Scan) to an ordinary path on the other side. This is subject to
various restrictions at present, especially that this strategy seems
unlikely to be sensible for merge joins, so only nested loops and
hash joins paths are generated.
This also allows an Append node to be pushed below a Gather node in
the case of a partitioned table.
Testing revealed that early versions of this patch made poor decisions
in some cases, which turned out to be caused by the fact that the
original cost model for Parallel Seq Scan wasn't very good. So this
patch tries to make some modest improvements in that area.
There is much more to be done in the area of generating good parallel
plans in all cases, but this seems like a useful step forward.
Patch by me, reviewed by Dilip Kumar and Amit Kapila.
Aggregate nodes now have two new modes: a "partial" mode where they
output the unfinalized transition state, and a "finalize" mode where
they accept unfinalized transition states rather than individual
values as input.
These new modes are not used anywhere yet, but they will be necessary
for parallel aggregation. The infrastructure also figures to be
useful for cases where we want to aggregate local data and remote
data via the FDW interface, and want to bring back partial aggregates
from the remote side that can then be combined with locally generated
partial aggregates to produce the final value. It may also be useful
even when neither FDWs nor parallelism are in play, as explained in
the comments in nodeAgg.c.
David Rowley and Simon Riggs, reviewed by KaiGai Kohei, Heikki
Linnakangas, Haribabu Kommi, and me.
This patch reduces pg_am to just two columns, a name and a handler
function. All the data formerly obtained from pg_am is now provided
in a C struct returned by the handler function. This is similar to
the designs we've adopted for FDWs and tablesample methods. There
are multiple advantages. For one, the index AM's support functions
are now simple C functions, making them faster to call and much less
error-prone, since the C compiler can now check function signatures.
For another, this will make it far more practical to define index access
methods in installable extensions.
A disadvantage is that SQL-level code can no longer see attributes
of index AMs; in particular, some of the crosschecks in the opr_sanity
regression test are no longer possible from SQL. We've addressed that
by adding a facility for the index AM to perform such checks instead.
(Much more could be done in that line, but for now we're content if the
amvalidate functions more or less replace what opr_sanity used to do.)
We might also want to expose some sort of reporting functionality, but
this patch doesn't do that.
Alexander Korotkov, reviewed by Petr Jelínek, and rather heavily
editorialized on by me.
The original coding read tuples from workers in round-robin fashion,
but performance testing shows that it works much better to read enough
to empty one queue before moving on to the next. I believe the
reason for this is that, with the old approach, we could easily wake
up a worker repeatedly to write only one new tuple into the shm_mq
each time. With this approach, by the time the process gets scheduled,
it has a decent chance of being able to fill the entire buffer in
one go.
Patch by me. Dilip Kumar helped with performance testing.
Omitted boundaries represent the upper or lower limit of the corresponding
array subscript. This allows simpler specification of many common
use-cases.
(Revised version of commit 9246af6799)
YUriy Zhuravlev
ExecOnConflictUpdate() passed t_ctid of the to-be-updated tuple to
ExecUpdate(). That's problematic primarily because of two reason: First
and foremost t_ctid could point to a different tuple. Secondly, and
that's what triggered the complaint by Stanislav, t_ctid is changed by
heap_update() to point to the new tuple version. The behavior of AFTER
UPDATE triggers was therefore broken, with NEW.* and OLD.* tuples
spuriously identical within AFTER UPDATE triggers.
To fix both issues, pass a pointer to t_self of a on-stack HeapTuple
instead.
Fixing this bug lead to one change in regression tests, which previously
failed due to the first issue mentioned above. There's a reasonable
expectation that test fails, as it updates one row repeatedly within one
INSERT ... ON CONFLICT statement. That is only possible if the second
update is triggered via ON CONFLICT ... SET, ON CONFLICT ... WHERE, or
by a WITH CHECK expression, as those are executed after
ExecOnConflictUpdate() does a visibility check. That could easily be
prohibited, but given it's allowed for plain UPDATEs and a rare corner
case, it doesn't seem worthwhile.
Reported-By: Stanislav Grozev
Author: Andres Freund and Peter Geoghegan
Discussion: CAA78GVqy1+LisN-8DygekD_Ldfy=BJLarSpjGhytOsgkpMavfQ@mail.gmail.com
Backpatch: 9.5, where ON CONFLICT was introduced
The original parallel sequential scan commit included only very limited
changes to the EXPLAIN output. Aggregated totals from all workers were
displayed, but there was no way to see what each individual worker did
or to distinguish the effort made by the workers from the effort made by
the leader.
Per a gripe by Thom Brown (and maybe others). Patch by me, reviewed
by Amit Kapila.
Robert Haas
Tom Lane
Magnus Hagander
Kevin Grittner
Andres Freund
Teodor Sigaev
Noah Misch
Stephen Frost
Bruce Momjian
Peter Eisentraut